drivers/usb/serial/whiteheat.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * USB ConnectTech WhiteHEAT driver
   4  *
   5  *      Copyright (C) 2002
   6  *          Connect Tech Inc.
   7  *
   8  *      Copyright (C) 1999 - 2001
   9  *          Greg Kroah-Hartman (greg@kroah.com)
  10  *
  11  * See Documentation/usb/usb-serial.rst for more information on using this
  12  * driver
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/errno.h>
  17 #include <linux/slab.h>
  18 #include <linux/tty.h>
  19 #include <linux/tty_driver.h>
  20 #include <linux/tty_flip.h>
  21 #include <linux/module.h>
  22 #include <linux/spinlock.h>
  23 #include <linux/mutex.h>
  24 #include <linux/uaccess.h>
  25 #include <asm/termbits.h>
  26 #include <linux/usb.h>
  27 #include <linux/serial_reg.h>
  28 #include <linux/serial.h>
  29 #include <linux/usb/serial.h>
  30 #include <linux/usb/ezusb.h>
  31 #include "whiteheat.h"                  /* WhiteHEAT specific commands */
  32
  33 #ifndef CMSPAR
  34 #define CMSPAR 0
  35 #endif
  36
  37 /*
  38  * Version Information
  39  */
  40 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
  41 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
  42
  43 #define CONNECT_TECH_VENDOR_ID          0x0710
  44 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
  45 #define CONNECT_TECH_WHITE_HEAT_ID      0x8001
  46
  47 /*
  48    ID tables for whiteheat are unusual, because we want to different
  49    things for different versions of the device.  Eventually, this
  50    will be doable from a single table.  But, for now, we define two
  51    separate ID tables, and then a third table that combines them
  52    just for the purpose of exporting the autoloading information.
  53 */
  54 static const struct usb_device_id id_table_std[] = {
  55         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
  56         { }                                             /* Terminating entry */
  57 };
  58
  59 static const struct usb_device_id id_table_prerenumeration[] = {
  60         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
  61         { }                                             /* Terminating entry */
  62 };
  63
  64 static const struct usb_device_id id_table_combined[] = {
  65         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
  66         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
  67         { }                                             /* Terminating entry */
  68 };
  69
  70 MODULE_DEVICE_TABLE(usb, id_table_combined);
  71
  72
  73 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
  74 static int  whiteheat_firmware_download(struct usb_serial *serial,
  75                                         const struct usb_device_id *id);
  76 static int  whiteheat_firmware_attach(struct usb_serial *serial);
  77
  78 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
  79 static int  whiteheat_attach(struct usb_serial *serial);
  80 static void whiteheat_release(struct usb_serial *serial);
  81 static int  whiteheat_port_probe(struct usb_serial_port *port);
  82 static int  whiteheat_port_remove(struct usb_serial_port *port);
  83 static int  whiteheat_open(struct tty_struct *tty,
  84                         struct usb_serial_port *port);
  85 static void whiteheat_close(struct usb_serial_port *port);
  86 static int  whiteheat_get_serial(struct tty_struct *tty,
  87                         struct serial_struct *ss);
  88 static void whiteheat_set_termios(struct tty_struct *tty,
  89                         struct usb_serial_port *port, struct ktermios *old);
  90 static int  whiteheat_tiocmget(struct tty_struct *tty);
  91 static int  whiteheat_tiocmset(struct tty_struct *tty,
  92                         unsigned int set, unsigned int clear);
  93 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
  94
  95 static struct usb_serial_driver whiteheat_fake_device = {
  96         .driver = {
  97                 .owner =        THIS_MODULE,
  98                 .name =         "whiteheatnofirm",
  99         },
 100         .description =          "Connect Tech - WhiteHEAT - (prerenumeration)",
 101         .id_table =             id_table_prerenumeration,
 102         .num_ports =            1,
 103         .probe =                whiteheat_firmware_download,
 104         .attach =               whiteheat_firmware_attach,
 105 };
 106
 107 static struct usb_serial_driver whiteheat_device = {
 108         .driver = {
 109                 .owner =        THIS_MODULE,
 110                 .name =         "whiteheat",
 111         },
 112         .description =          "Connect Tech - WhiteHEAT",
 113         .id_table =             id_table_std,
 114         .num_ports =            4,
 115         .num_bulk_in =          5,
 116         .num_bulk_out =         5,
 117         .attach =               whiteheat_attach,
 118         .release =              whiteheat_release,
 119         .port_probe =           whiteheat_port_probe,
 120         .port_remove =          whiteheat_port_remove,
 121         .open =                 whiteheat_open,
 122         .close =                whiteheat_close,
 123         .get_serial =           whiteheat_get_serial,
 124         .set_termios =          whiteheat_set_termios,
 125         .break_ctl =            whiteheat_break_ctl,
 126         .tiocmget =             whiteheat_tiocmget,
 127         .tiocmset =             whiteheat_tiocmset,
 128         .throttle =             usb_serial_generic_throttle,
 129         .unthrottle =           usb_serial_generic_unthrottle,
 130 };
 131
 132 static struct usb_serial_driver * const serial_drivers[] = {
 133         &whiteheat_fake_device, &whiteheat_device, NULL
 134 };
 135
 136 struct whiteheat_command_private {
 137         struct mutex            mutex;
 138         __u8                    port_running;
 139         __u8                    command_finished;
 140         wait_queue_head_t       wait_command; /* for handling sleeping whilst
 141                                                  waiting for a command to
 142                                                  finish */
 143         __u8                    result_buffer[64];
 144 };
 145
 146 struct whiteheat_private {
 147         __u8                    mcr;            /* FIXME: no locking on mcr */
 148 };
 149
 150
 151 /* local function prototypes */
 152 static int start_command_port(struct usb_serial *serial);
 153 static void stop_command_port(struct usb_serial *serial);
 154 static void command_port_write_callback(struct urb *urb);
 155 static void command_port_read_callback(struct urb *urb);
 156
 157 static int firm_send_command(struct usb_serial_port *port, __u8 command,
 158                                                 __u8 *data, __u8 datasize);
 159 static int firm_open(struct usb_serial_port *port);
 160 static int firm_close(struct usb_serial_port *port);
 161 static void firm_setup_port(struct tty_struct *tty);
 162 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 163 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 164 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
 165 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
 166 static int firm_get_dtr_rts(struct usb_serial_port *port);
 167 static int firm_report_tx_done(struct usb_serial_port *port);
 168
 169
 170 #define COMMAND_PORT            4
 171 #define COMMAND_TIMEOUT         (2*HZ)  /* 2 second timeout for a command */
 172 #define COMMAND_TIMEOUT_MS      2000
 173 #define CLOSING_DELAY           (30 * HZ)
 174
 175
 176 /*****************************************************************************
 177  * Connect Tech's White Heat prerenumeration driver functions
 178  *****************************************************************************/
 179
 180 /* steps to download the firmware to the WhiteHEAT device:
 181  - hold the reset (by writing to the reset bit of the CPUCS register)
 182  - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
 183  - release the reset (by writing to the CPUCS register)
 184  - download the WH.HEX file for all addresses greater than 0x1b3f using
 185    VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
 186  - hold the reset
 187  - download the WH.HEX file for all addresses less than 0x1b40 using
 188    VENDOR_REQUEST_ANCHOR_LOAD
 189  - release the reset
 190  - device renumerated itself and comes up as new device id with all
 191    firmware download completed.
 192 */
 193 static int whiteheat_firmware_download(struct usb_serial *serial,
 194                                         const struct usb_device_id *id)
 195 {
 196         int response;
 197
 198         response = ezusb_fx1_ihex_firmware_download(serial->dev, "/*(DEBLOBBED)*/");
 199         if (response >= 0) {
 200                 response = ezusb_fx1_ihex_firmware_download(serial->dev, "/*(DEBLOBBED)*/");
 201                 if (response >= 0)
 202                         return 0;
 203         }
 204         return -ENOENT;
 205 }
 206
 207
 208 static int whiteheat_firmware_attach(struct usb_serial *serial)
 209 {
 210         /* We want this device to fail to have a driver assigned to it */
 211         return 1;
 212 }
 213
 214
 215 /*****************************************************************************
 216  * Connect Tech's White Heat serial driver functions
 217  *****************************************************************************/
 218
 219 static int whiteheat_attach(struct usb_serial *serial)
 220 {
 221         struct usb_serial_port *command_port;
 222         struct whiteheat_command_private *command_info;
 223         struct whiteheat_hw_info *hw_info;
 224         int pipe;
 225         int ret;
 226         int alen;
 227         __u8 *command;
 228         __u8 *result;
 229
 230         command_port = serial->port[COMMAND_PORT];
 231
 232         pipe = usb_sndbulkpipe(serial->dev,
 233                         command_port->bulk_out_endpointAddress);
 234         command = kmalloc(2, GFP_KERNEL);
 235         if (!command)
 236                 goto no_command_buffer;
 237         command[0] = WHITEHEAT_GET_HW_INFO;
 238         command[1] = 0;
 239
 240         result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
 241         if (!result)
 242                 goto no_result_buffer;
 243         /*
 244          * When the module is reloaded the firmware is still there and
 245          * the endpoints are still in the usb core unchanged. This is the
 246          * unlinking bug in disguise. Same for the call below.
 247          */
 248         usb_clear_halt(serial->dev, pipe);
 249         ret = usb_bulk_msg(serial->dev, pipe, command, 2,
 250                                                 &alen, COMMAND_TIMEOUT_MS);
 251         if (ret) {
 252                 dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
 253                         serial->type->description, ret);
 254                 goto no_firmware;
 255         } else if (alen != 2) {
 256                 dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
 257                         serial->type->description, alen);
 258                 goto no_firmware;
 259         }
 260
 261         pipe = usb_rcvbulkpipe(serial->dev,
 262                                 command_port->bulk_in_endpointAddress);
 263         /* See the comment on the usb_clear_halt() above */
 264         usb_clear_halt(serial->dev, pipe);
 265         ret = usb_bulk_msg(serial->dev, pipe, result,
 266                         sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
 267         if (ret) {
 268                 dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
 269                         serial->type->description, ret);
 270                 goto no_firmware;
 271         } else if (alen != sizeof(*hw_info) + 1) {
 272                 dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
 273                         serial->type->description, alen);
 274                 goto no_firmware;
 275         } else if (result[0] != command[0]) {
 276                 dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
 277                         serial->type->description, result[0]);
 278                 goto no_firmware;
 279         }
 280
 281         hw_info = (struct whiteheat_hw_info *)&result[1];
 282
 283         dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n",
 284                  serial->type->description,
 285                  hw_info->sw_major_rev, hw_info->sw_minor_rev);
 286
 287         command_info = kmalloc(sizeof(struct whiteheat_command_private),
 288                                                                 GFP_KERNEL);
 289         if (!command_info)
 290                 goto no_command_private;
 291
 292         mutex_init(&command_info->mutex);
 293         command_info->port_running = 0;
 294         init_waitqueue_head(&command_info->wait_command);
 295         usb_set_serial_port_data(command_port, command_info);
 296         command_port->write_urb->complete = command_port_write_callback;
 297         command_port->read_urb->complete = command_port_read_callback;
 298         kfree(result);
 299         kfree(command);
 300
 301         return 0;
 302
 303 no_firmware:
 304         /* Firmware likely not running */
 305         dev_err(&serial->dev->dev,
 306                 "%s: Unable to retrieve firmware version, try replugging\n",
 307                 serial->type->description);
 308         dev_err(&serial->dev->dev,
 309                 "%s: If the firmware is not running (status led not blinking)\n",
 310                 serial->type->description);
 311         dev_err(&serial->dev->dev,
 312                 "%s: please contact support@connecttech.com\n",
 313                 serial->type->description);
 314         kfree(result);
 315         kfree(command);
 316         return -ENODEV;
 317
 318 no_command_private:
 319         kfree(result);
 320 no_result_buffer:
 321         kfree(command);
 322 no_command_buffer:
 323         return -ENOMEM;
 324 }
 325
 326 static void whiteheat_release(struct usb_serial *serial)
 327 {
 328         struct usb_serial_port *command_port;
 329
 330         /* free up our private data for our command port */
 331         command_port = serial->port[COMMAND_PORT];
 332         kfree(usb_get_serial_port_data(command_port));
 333 }
 334
 335 static int whiteheat_port_probe(struct usb_serial_port *port)
 336 {
 337         struct whiteheat_private *info;
 338
 339         info = kzalloc(sizeof(*info), GFP_KERNEL);
 340         if (!info)
 341                 return -ENOMEM;
 342
 343         usb_set_serial_port_data(port, info);
 344
 345         return 0;
 346 }
 347
 348 static int whiteheat_port_remove(struct usb_serial_port *port)
 349 {
 350         struct whiteheat_private *info;
 351
 352         info = usb_get_serial_port_data(port);
 353         kfree(info);
 354
 355         return 0;
 356 }
 357
 358 static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
 359 {
 360         int retval;
 361
 362         retval = start_command_port(port->serial);
 363         if (retval)
 364                 goto exit;
 365
 366         /* send an open port command */
 367         retval = firm_open(port);
 368         if (retval) {
 369                 stop_command_port(port->serial);
 370                 goto exit;
 371         }
 372
 373         retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
 374         if (retval) {
 375                 firm_close(port);
 376                 stop_command_port(port->serial);
 377                 goto exit;
 378         }
 379
 380         if (tty)
 381                 firm_setup_port(tty);
 382
 383         /* Work around HCD bugs */
 384         usb_clear_halt(port->serial->dev, port->read_urb->pipe);
 385         usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 386
 387         retval = usb_serial_generic_open(tty, port);
 388         if (retval) {
 389                 firm_close(port);
 390                 stop_command_port(port->serial);
 391                 goto exit;
 392         }
 393 exit:
 394         return retval;
 395 }
 396
 397
 398 static void whiteheat_close(struct usb_serial_port *port)
 399 {
 400         firm_report_tx_done(port);
 401         firm_close(port);
 402
 403         usb_serial_generic_close(port);
 404
 405         stop_command_port(port->serial);
 406 }
 407
 408 static int whiteheat_tiocmget(struct tty_struct *tty)
 409 {
 410         struct usb_serial_port *port = tty->driver_data;
 411         struct whiteheat_private *info = usb_get_serial_port_data(port);
 412         unsigned int modem_signals = 0;
 413
 414         firm_get_dtr_rts(port);
 415         if (info->mcr & UART_MCR_DTR)
 416                 modem_signals |= TIOCM_DTR;
 417         if (info->mcr & UART_MCR_RTS)
 418                 modem_signals |= TIOCM_RTS;
 419
 420         return modem_signals;
 421 }
 422
 423 static int whiteheat_tiocmset(struct tty_struct *tty,
 424                                unsigned int set, unsigned int clear)
 425 {
 426         struct usb_serial_port *port = tty->driver_data;
 427         struct whiteheat_private *info = usb_get_serial_port_data(port);
 428
 429         if (set & TIOCM_RTS)
 430                 info->mcr |= UART_MCR_RTS;
 431         if (set & TIOCM_DTR)
 432                 info->mcr |= UART_MCR_DTR;
 433
 434         if (clear & TIOCM_RTS)
 435                 info->mcr &= ~UART_MCR_RTS;
 436         if (clear & TIOCM_DTR)
 437                 info->mcr &= ~UART_MCR_DTR;
 438
 439         firm_set_dtr(port, info->mcr & UART_MCR_DTR);
 440         firm_set_rts(port, info->mcr & UART_MCR_RTS);
 441         return 0;
 442 }
 443
 444
 445 static int whiteheat_get_serial(struct tty_struct *tty,
 446                                 struct serial_struct *ss)
 447 {
 448         struct usb_serial_port *port = tty->driver_data;
 449
 450         ss->type = PORT_16654;
 451         ss->line = port->minor;
 452         ss->port = port->port_number;
 453         ss->xmit_fifo_size = kfifo_size(&port->write_fifo);
 454         ss->custom_divisor = 0;
 455         ss->baud_base = 460800;
 456         ss->close_delay = CLOSING_DELAY;
 457         ss->closing_wait = CLOSING_DELAY;
 458
 459         return 0;
 460 }
 461
 462
 463 static void whiteheat_set_termios(struct tty_struct *tty,
 464         struct usb_serial_port *port, struct ktermios *old_termios)
 465 {
 466         firm_setup_port(tty);
 467 }
 468
 469 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state)
 470 {
 471         struct usb_serial_port *port = tty->driver_data;
 472         firm_set_break(port, break_state);
 473 }
 474
 475
 476 /*****************************************************************************
 477  * Connect Tech's White Heat callback routines
 478  *****************************************************************************/
 479 static void command_port_write_callback(struct urb *urb)
 480 {
 481         int status = urb->status;
 482
 483         if (status) {
 484                 dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status);
 485                 return;
 486         }
 487 }
 488
 489
 490 static void command_port_read_callback(struct urb *urb)
 491 {
 492         struct usb_serial_port *command_port = urb->context;
 493         struct whiteheat_command_private *command_info;
 494         int status = urb->status;
 495         unsigned char *data = urb->transfer_buffer;
 496         int result;
 497
 498         command_info = usb_get_serial_port_data(command_port);
 499         if (!command_info) {
 500                 dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__);
 501                 return;
 502         }
 503         if (!urb->actual_length) {
 504                 dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__);
 505                 return;
 506         }
 507         if (status) {
 508                 dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status);
 509                 if (status != -ENOENT)
 510                         command_info->command_finished = WHITEHEAT_CMD_FAILURE;
 511                 wake_up(&command_info->wait_command);
 512                 return;
 513         }
 514
 515         usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data);
 516
 517         if (data[0] == WHITEHEAT_CMD_COMPLETE) {
 518                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
 519                 wake_up(&command_info->wait_command);
 520         } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
 521                 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
 522                 wake_up(&command_info->wait_command);
 523         } else if (data[0] == WHITEHEAT_EVENT) {
 524                 /* These are unsolicited reports from the firmware, hence no
 525                    waiting command to wakeup */
 526                 dev_dbg(&urb->dev->dev, "%s - event received\n", __func__);
 527         } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) &&
 528                 (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) {
 529                 memcpy(command_info->result_buffer, &data[1],
 530                                                 urb->actual_length - 1);
 531                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
 532                 wake_up(&command_info->wait_command);
 533         } else
 534                 dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__);
 535
 536         /* Continue trying to always read */
 537         result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
 538         if (result)
 539                 dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n",
 540                         __func__, result);
 541 }
 542
 543
 544 /*****************************************************************************
 545  * Connect Tech's White Heat firmware interface
 546  *****************************************************************************/
 547 static int firm_send_command(struct usb_serial_port *port, __u8 command,
 548                                                 __u8 *data, __u8 datasize)
 549 {
 550         struct usb_serial_port *command_port;
 551         struct whiteheat_command_private *command_info;
 552         struct whiteheat_private *info;
 553         struct device *dev = &port->dev;
 554         __u8 *transfer_buffer;
 555         int retval = 0;
 556         int t;
 557
 558         dev_dbg(dev, "%s - command %d\n", __func__, command);
 559
 560         command_port = port->serial->port[COMMAND_PORT];
 561         command_info = usb_get_serial_port_data(command_port);
 562
 563         if (command_port->bulk_out_size < datasize + 1)
 564                 return -EIO;
 565
 566         mutex_lock(&command_info->mutex);
 567         command_info->command_finished = false;
 568
 569         transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
 570         transfer_buffer[0] = command;
 571         memcpy(&transfer_buffer[1], data, datasize);
 572         command_port->write_urb->transfer_buffer_length = datasize + 1;
 573         retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
 574         if (retval) {
 575                 dev_dbg(dev, "%s - submit urb failed\n", __func__);
 576                 goto exit;
 577         }
 578
 579         /* wait for the command to complete */
 580         t = wait_event_timeout(command_info->wait_command,
 581                 (bool)command_info->command_finished, COMMAND_TIMEOUT);
 582         if (!t)
 583                 usb_kill_urb(command_port->write_urb);
 584
 585         if (command_info->command_finished == false) {
 586                 dev_dbg(dev, "%s - command timed out.\n", __func__);
 587                 retval = -ETIMEDOUT;
 588                 goto exit;
 589         }
 590
 591         if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
 592                 dev_dbg(dev, "%s - command failed.\n", __func__);
 593                 retval = -EIO;
 594                 goto exit;
 595         }
 596
 597         if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
 598                 dev_dbg(dev, "%s - command completed.\n", __func__);
 599                 switch (command) {
 600                 case WHITEHEAT_GET_DTR_RTS:
 601                         info = usb_get_serial_port_data(port);
 602                         info->mcr = command_info->result_buffer[0];
 603                         break;
 604                 }
 605         }
 606 exit:
 607         mutex_unlock(&command_info->mutex);
 608         return retval;
 609 }
 610
 611
 612 static int firm_open(struct usb_serial_port *port)
 613 {
 614         struct whiteheat_simple open_command;
 615
 616         open_command.port = port->port_number + 1;
 617         return firm_send_command(port, WHITEHEAT_OPEN,
 618                 (__u8 *)&open_command, sizeof(open_command));
 619 }
 620
 621
 622 static int firm_close(struct usb_serial_port *port)
 623 {
 624         struct whiteheat_simple close_command;
 625
 626         close_command.port = port->port_number + 1;
 627         return firm_send_command(port, WHITEHEAT_CLOSE,
 628                         (__u8 *)&close_command, sizeof(close_command));
 629 }
 630
 631
 632 static void firm_setup_port(struct tty_struct *tty)
 633 {
 634         struct usb_serial_port *port = tty->driver_data;
 635         struct device *dev = &port->dev;
 636         struct whiteheat_port_settings port_settings;
 637         unsigned int cflag = tty->termios.c_cflag;
 638         speed_t baud;
 639
 640         port_settings.port = port->port_number + 1;
 641
 642         /* get the byte size */
 643         switch (cflag & CSIZE) {
 644         case CS5:       port_settings.bits = 5;   break;
 645         case CS6:       port_settings.bits = 6;   break;
 646         case CS7:       port_settings.bits = 7;   break;
 647         default:
 648         case CS8:       port_settings.bits = 8;   break;
 649         }
 650         dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits);
 651
 652         /* determine the parity */
 653         if (cflag & PARENB)
 654                 if (cflag & CMSPAR)
 655                         if (cflag & PARODD)
 656                                 port_settings.parity = WHITEHEAT_PAR_MARK;
 657                         else
 658                                 port_settings.parity = WHITEHEAT_PAR_SPACE;
 659                 else
 660                         if (cflag & PARODD)
 661                                 port_settings.parity = WHITEHEAT_PAR_ODD;
 662                         else
 663                                 port_settings.parity = WHITEHEAT_PAR_EVEN;
 664         else
 665                 port_settings.parity = WHITEHEAT_PAR_NONE;
 666         dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity);
 667
 668         /* figure out the stop bits requested */
 669         if (cflag & CSTOPB)
 670                 port_settings.stop = 2;
 671         else
 672                 port_settings.stop = 1;
 673         dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop);
 674
 675         /* figure out the flow control settings */
 676         if (cflag & CRTSCTS)
 677                 port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
 678                                                 WHITEHEAT_HFLOW_RTS);
 679         else
 680                 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
 681         dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__,
 682             (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
 683             (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
 684             (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
 685             (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
 686
 687         /* determine software flow control */
 688         if (I_IXOFF(tty))
 689                 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
 690         else
 691                 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
 692         dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow);
 693
 694         port_settings.xon = START_CHAR(tty);
 695         port_settings.xoff = STOP_CHAR(tty);
 696         dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff);
 697
 698         /* get the baud rate wanted */
 699         baud = tty_get_baud_rate(tty);
 700         port_settings.baud = cpu_to_le32(baud);
 701         dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud);
 702
 703         /* fixme: should set validated settings */
 704         tty_encode_baud_rate(tty, baud, baud);
 705
 706         /* handle any settings that aren't specified in the tty structure */
 707         port_settings.lloop = 0;
 708
 709         /* now send the message to the device */
 710         firm_send_command(port, WHITEHEAT_SETUP_PORT,
 711                         (__u8 *)&port_settings, sizeof(port_settings));
 712 }
 713
 714
 715 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
 716 {
 717         struct whiteheat_set_rdb rts_command;
 718
 719         rts_command.port = port->port_number + 1;
 720         rts_command.state = onoff;
 721         return firm_send_command(port, WHITEHEAT_SET_RTS,
 722                         (__u8 *)&rts_command, sizeof(rts_command));
 723 }
 724
 725
 726 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
 727 {
 728         struct whiteheat_set_rdb dtr_command;
 729
 730         dtr_command.port = port->port_number + 1;
 731         dtr_command.state = onoff;
 732         return firm_send_command(port, WHITEHEAT_SET_DTR,
 733                         (__u8 *)&dtr_command, sizeof(dtr_command));
 734 }
 735
 736
 737 static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
 738 {
 739         struct whiteheat_set_rdb break_command;
 740
 741         break_command.port = port->port_number + 1;
 742         break_command.state = onoff;
 743         return firm_send_command(port, WHITEHEAT_SET_BREAK,
 744                         (__u8 *)&break_command, sizeof(break_command));
 745 }
 746
 747
 748 static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
 749 {
 750         struct whiteheat_purge purge_command;
 751
 752         purge_command.port = port->port_number + 1;
 753         purge_command.what = rxtx;
 754         return firm_send_command(port, WHITEHEAT_PURGE,
 755                         (__u8 *)&purge_command, sizeof(purge_command));
 756 }
 757
 758
 759 static int firm_get_dtr_rts(struct usb_serial_port *port)
 760 {
 761         struct whiteheat_simple get_dr_command;
 762
 763         get_dr_command.port = port->port_number + 1;
 764         return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
 765                         (__u8 *)&get_dr_command, sizeof(get_dr_command));
 766 }
 767
 768
 769 static int firm_report_tx_done(struct usb_serial_port *port)
 770 {
 771         struct whiteheat_simple close_command;
 772
 773         close_command.port = port->port_number + 1;
 774         return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
 775                         (__u8 *)&close_command, sizeof(close_command));
 776 }
 777
 778
 779 /*****************************************************************************
 780  * Connect Tech's White Heat utility functions
 781  *****************************************************************************/
 782 static int start_command_port(struct usb_serial *serial)
 783 {
 784         struct usb_serial_port *command_port;
 785         struct whiteheat_command_private *command_info;
 786         int retval = 0;
 787
 788         command_port = serial->port[COMMAND_PORT];
 789         command_info = usb_get_serial_port_data(command_port);
 790         mutex_lock(&command_info->mutex);
 791         if (!command_info->port_running) {
 792                 /* Work around HCD bugs */
 793                 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
 794
 795                 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
 796                 if (retval) {
 797                         dev_err(&serial->dev->dev,
 798                                 "%s - failed submitting read urb, error %d\n",
 799                                 __func__, retval);
 800                         goto exit;
 801                 }
 802         }
 803         command_info->port_running++;
 804
 805 exit:
 806         mutex_unlock(&command_info->mutex);
 807         return retval;
 808 }
 809
 810
 811 static void stop_command_port(struct usb_serial *serial)
 812 {
 813         struct usb_serial_port *command_port;
 814         struct whiteheat_command_private *command_info;
 815
 816         command_port = serial->port[COMMAND_PORT];
 817         command_info = usb_get_serial_port_data(command_port);
 818         mutex_lock(&command_info->mutex);
 819         command_info->port_running--;
 820         if (!command_info->port_running)
 821                 usb_kill_urb(command_port->read_urb);
 822         mutex_unlock(&command_info->mutex);
 823 }
 824
 825 module_usb_serial_driver(serial_drivers, id_table_combined);
 826
 827 MODULE_AUTHOR(DRIVER_AUTHOR);
 828 MODULE_DESCRIPTION(DRIVER_DESC);
 829 MODULE_LICENSE("GPL");
 830
 831 /*(DEBLOBBED)*/