1 // SPDX-License-Identifier: GPL-2.0+
3 * USB ConnectTech WhiteHEAT driver
8 * Copyright (C) 1999 - 2001
9 * Greg Kroah-Hartman (greg@kroah.com)
11 * See Documentation/usb/usb-serial.rst for more information on using this
15 #include <linux/kernel.h>
16 #include <linux/errno.h>
17 #include <linux/slab.h>
18 #include <linux/tty.h>
19 #include <linux/tty_driver.h>
20 #include <linux/tty_flip.h>
21 #include <linux/module.h>
22 #include <linux/spinlock.h>
23 #include <linux/mutex.h>
24 #include <linux/uaccess.h>
25 #include <asm/termbits.h>
26 #include <linux/usb.h>
27 #include <linux/serial_reg.h>
28 #include <linux/serial.h>
29 #include <linux/usb/serial.h>
30 #include <linux/usb/ezusb.h>
31 #include "whiteheat.h" /* WhiteHEAT specific commands */
36 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
37 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
39 #define CONNECT_TECH_VENDOR_ID 0x0710
40 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
41 #define CONNECT_TECH_WHITE_HEAT_ID 0x8001
44 ID tables for whiteheat are unusual, because we want to different
45 things for different versions of the device. Eventually, this
46 will be doable from a single table. But, for now, we define two
47 separate ID tables, and then a third table that combines them
48 just for the purpose of exporting the autoloading information.
50 static const struct usb_device_id id_table_std[] = {
51 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
52 { } /* Terminating entry */
55 static const struct usb_device_id id_table_prerenumeration[] = {
56 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
57 { } /* Terminating entry */
60 static const struct usb_device_id id_table_combined[] = {
61 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
62 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
63 { } /* Terminating entry */
66 MODULE_DEVICE_TABLE(usb, id_table_combined);
69 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
70 static int whiteheat_firmware_download(struct usb_serial *serial,
71 const struct usb_device_id *id);
72 static int whiteheat_firmware_attach(struct usb_serial *serial);
74 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
75 static int whiteheat_attach(struct usb_serial *serial);
76 static void whiteheat_release(struct usb_serial *serial);
77 static int whiteheat_port_probe(struct usb_serial_port *port);
78 static void whiteheat_port_remove(struct usb_serial_port *port);
79 static int whiteheat_open(struct tty_struct *tty,
80 struct usb_serial_port *port);
81 static void whiteheat_close(struct usb_serial_port *port);
82 static void whiteheat_get_serial(struct tty_struct *tty,
83 struct serial_struct *ss);
84 static void whiteheat_set_termios(struct tty_struct *tty,
85 struct usb_serial_port *port,
86 const struct ktermios *old_termios);
87 static int whiteheat_tiocmget(struct tty_struct *tty);
88 static int whiteheat_tiocmset(struct tty_struct *tty,
89 unsigned int set, unsigned int clear);
90 static int whiteheat_break_ctl(struct tty_struct *tty, int break_state);
92 static struct usb_serial_driver whiteheat_fake_device = {
95 .name = "whiteheatnofirm",
97 .description = "Connect Tech - WhiteHEAT - (prerenumeration)",
98 .id_table = id_table_prerenumeration,
100 .probe = whiteheat_firmware_download,
101 .attach = whiteheat_firmware_attach,
104 static struct usb_serial_driver whiteheat_device = {
106 .owner = THIS_MODULE,
109 .description = "Connect Tech - WhiteHEAT",
110 .id_table = id_table_std,
114 .attach = whiteheat_attach,
115 .release = whiteheat_release,
116 .port_probe = whiteheat_port_probe,
117 .port_remove = whiteheat_port_remove,
118 .open = whiteheat_open,
119 .close = whiteheat_close,
120 .get_serial = whiteheat_get_serial,
121 .set_termios = whiteheat_set_termios,
122 .break_ctl = whiteheat_break_ctl,
123 .tiocmget = whiteheat_tiocmget,
124 .tiocmset = whiteheat_tiocmset,
125 .throttle = usb_serial_generic_throttle,
126 .unthrottle = usb_serial_generic_unthrottle,
129 static struct usb_serial_driver * const serial_drivers[] = {
130 &whiteheat_fake_device, &whiteheat_device, NULL
133 struct whiteheat_command_private {
136 __u8 command_finished;
137 wait_queue_head_t wait_command; /* for handling sleeping whilst
138 waiting for a command to
140 __u8 result_buffer[64];
143 struct whiteheat_private {
144 __u8 mcr; /* FIXME: no locking on mcr */
148 /* local function prototypes */
149 static int start_command_port(struct usb_serial *serial);
150 static void stop_command_port(struct usb_serial *serial);
151 static void command_port_write_callback(struct urb *urb);
152 static void command_port_read_callback(struct urb *urb);
154 static int firm_send_command(struct usb_serial_port *port, __u8 command,
155 __u8 *data, __u8 datasize);
156 static int firm_open(struct usb_serial_port *port);
157 static int firm_close(struct usb_serial_port *port);
158 static void firm_setup_port(struct tty_struct *tty);
159 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
160 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
161 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
162 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
163 static int firm_get_dtr_rts(struct usb_serial_port *port);
164 static int firm_report_tx_done(struct usb_serial_port *port);
167 #define COMMAND_PORT 4
168 #define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */
169 #define COMMAND_TIMEOUT_MS 2000
172 /*****************************************************************************
173 * Connect Tech's White Heat prerenumeration driver functions
174 *****************************************************************************/
176 /* steps to download the firmware to the WhiteHEAT device:
177 - hold the reset (by writing to the reset bit of the CPUCS register)
178 - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
179 - release the reset (by writing to the CPUCS register)
180 - download the WH.HEX file for all addresses greater than 0x1b3f using
181 VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
183 - download the WH.HEX file for all addresses less than 0x1b40 using
184 VENDOR_REQUEST_ANCHOR_LOAD
186 - device renumerated itself and comes up as new device id with all
187 firmware download completed.
189 static int whiteheat_firmware_download(struct usb_serial *serial,
190 const struct usb_device_id *id)
194 response = ezusb_fx1_ihex_firmware_download(serial->dev, "/*(DEBLOBBED)*/");
196 response = ezusb_fx1_ihex_firmware_download(serial->dev, "/*(DEBLOBBED)*/");
204 static int whiteheat_firmware_attach(struct usb_serial *serial)
206 /* We want this device to fail to have a driver assigned to it */
211 /*****************************************************************************
212 * Connect Tech's White Heat serial driver functions
213 *****************************************************************************/
215 static int whiteheat_attach(struct usb_serial *serial)
217 struct usb_serial_port *command_port;
218 struct whiteheat_command_private *command_info;
219 struct whiteheat_hw_info *hw_info;
226 command_port = serial->port[COMMAND_PORT];
228 pipe = usb_sndbulkpipe(serial->dev,
229 command_port->bulk_out_endpointAddress);
230 command = kmalloc(2, GFP_KERNEL);
232 goto no_command_buffer;
233 command[0] = WHITEHEAT_GET_HW_INFO;
236 result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
238 goto no_result_buffer;
240 * When the module is reloaded the firmware is still there and
241 * the endpoints are still in the usb core unchanged. This is the
242 * unlinking bug in disguise. Same for the call below.
244 usb_clear_halt(serial->dev, pipe);
245 ret = usb_bulk_msg(serial->dev, pipe, command, 2,
246 &alen, COMMAND_TIMEOUT_MS);
248 dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
249 serial->type->description, ret);
251 } else if (alen != 2) {
252 dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
253 serial->type->description, alen);
257 pipe = usb_rcvbulkpipe(serial->dev,
258 command_port->bulk_in_endpointAddress);
259 /* See the comment on the usb_clear_halt() above */
260 usb_clear_halt(serial->dev, pipe);
261 ret = usb_bulk_msg(serial->dev, pipe, result,
262 sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
264 dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
265 serial->type->description, ret);
267 } else if (alen != sizeof(*hw_info) + 1) {
268 dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
269 serial->type->description, alen);
271 } else if (result[0] != command[0]) {
272 dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
273 serial->type->description, result[0]);
277 hw_info = (struct whiteheat_hw_info *)&result[1];
279 dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n",
280 serial->type->description,
281 hw_info->sw_major_rev, hw_info->sw_minor_rev);
283 command_info = kmalloc(sizeof(struct whiteheat_command_private),
286 goto no_command_private;
288 mutex_init(&command_info->mutex);
289 command_info->port_running = 0;
290 init_waitqueue_head(&command_info->wait_command);
291 usb_set_serial_port_data(command_port, command_info);
292 command_port->write_urb->complete = command_port_write_callback;
293 command_port->read_urb->complete = command_port_read_callback;
300 /* Firmware likely not running */
301 dev_err(&serial->dev->dev,
302 "%s: Unable to retrieve firmware version, try replugging\n",
303 serial->type->description);
304 dev_err(&serial->dev->dev,
305 "%s: If the firmware is not running (status led not blinking)\n",
306 serial->type->description);
307 dev_err(&serial->dev->dev,
308 "%s: please contact support@connecttech.com\n",
309 serial->type->description);
322 static void whiteheat_release(struct usb_serial *serial)
324 struct usb_serial_port *command_port;
326 /* free up our private data for our command port */
327 command_port = serial->port[COMMAND_PORT];
328 kfree(usb_get_serial_port_data(command_port));
331 static int whiteheat_port_probe(struct usb_serial_port *port)
333 struct whiteheat_private *info;
335 info = kzalloc(sizeof(*info), GFP_KERNEL);
339 usb_set_serial_port_data(port, info);
344 static void whiteheat_port_remove(struct usb_serial_port *port)
346 struct whiteheat_private *info;
348 info = usb_get_serial_port_data(port);
352 static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
356 retval = start_command_port(port->serial);
360 /* send an open port command */
361 retval = firm_open(port);
363 stop_command_port(port->serial);
367 retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
370 stop_command_port(port->serial);
375 firm_setup_port(tty);
377 /* Work around HCD bugs */
378 usb_clear_halt(port->serial->dev, port->read_urb->pipe);
379 usb_clear_halt(port->serial->dev, port->write_urb->pipe);
381 retval = usb_serial_generic_open(tty, port);
384 stop_command_port(port->serial);
392 static void whiteheat_close(struct usb_serial_port *port)
394 firm_report_tx_done(port);
397 usb_serial_generic_close(port);
399 stop_command_port(port->serial);
402 static int whiteheat_tiocmget(struct tty_struct *tty)
404 struct usb_serial_port *port = tty->driver_data;
405 struct whiteheat_private *info = usb_get_serial_port_data(port);
406 unsigned int modem_signals = 0;
408 firm_get_dtr_rts(port);
409 if (info->mcr & UART_MCR_DTR)
410 modem_signals |= TIOCM_DTR;
411 if (info->mcr & UART_MCR_RTS)
412 modem_signals |= TIOCM_RTS;
414 return modem_signals;
417 static int whiteheat_tiocmset(struct tty_struct *tty,
418 unsigned int set, unsigned int clear)
420 struct usb_serial_port *port = tty->driver_data;
421 struct whiteheat_private *info = usb_get_serial_port_data(port);
424 info->mcr |= UART_MCR_RTS;
426 info->mcr |= UART_MCR_DTR;
428 if (clear & TIOCM_RTS)
429 info->mcr &= ~UART_MCR_RTS;
430 if (clear & TIOCM_DTR)
431 info->mcr &= ~UART_MCR_DTR;
433 firm_set_dtr(port, info->mcr & UART_MCR_DTR);
434 firm_set_rts(port, info->mcr & UART_MCR_RTS);
439 static void whiteheat_get_serial(struct tty_struct *tty, struct serial_struct *ss)
441 ss->baud_base = 460800;
445 static void whiteheat_set_termios(struct tty_struct *tty,
446 struct usb_serial_port *port,
447 const struct ktermios *old_termios)
449 firm_setup_port(tty);
452 static int whiteheat_break_ctl(struct tty_struct *tty, int break_state)
454 struct usb_serial_port *port = tty->driver_data;
456 return firm_set_break(port, break_state);
460 /*****************************************************************************
461 * Connect Tech's White Heat callback routines
462 *****************************************************************************/
463 static void command_port_write_callback(struct urb *urb)
465 int status = urb->status;
468 dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status);
474 static void command_port_read_callback(struct urb *urb)
476 struct usb_serial_port *command_port = urb->context;
477 struct whiteheat_command_private *command_info;
478 int status = urb->status;
479 unsigned char *data = urb->transfer_buffer;
482 command_info = usb_get_serial_port_data(command_port);
484 dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__);
487 if (!urb->actual_length) {
488 dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__);
492 dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status);
493 if (status != -ENOENT)
494 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
495 wake_up(&command_info->wait_command);
499 usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data);
501 if (data[0] == WHITEHEAT_CMD_COMPLETE) {
502 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
503 wake_up(&command_info->wait_command);
504 } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
505 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
506 wake_up(&command_info->wait_command);
507 } else if (data[0] == WHITEHEAT_EVENT) {
508 /* These are unsolicited reports from the firmware, hence no
509 waiting command to wakeup */
510 dev_dbg(&urb->dev->dev, "%s - event received\n", __func__);
511 } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) &&
512 (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) {
513 memcpy(command_info->result_buffer, &data[1],
514 urb->actual_length - 1);
515 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
516 wake_up(&command_info->wait_command);
518 dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__);
520 /* Continue trying to always read */
521 result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
523 dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n",
528 /*****************************************************************************
529 * Connect Tech's White Heat firmware interface
530 *****************************************************************************/
531 static int firm_send_command(struct usb_serial_port *port, __u8 command,
532 __u8 *data, __u8 datasize)
534 struct usb_serial_port *command_port;
535 struct whiteheat_command_private *command_info;
536 struct whiteheat_private *info;
537 struct device *dev = &port->dev;
538 __u8 *transfer_buffer;
542 dev_dbg(dev, "%s - command %d\n", __func__, command);
544 command_port = port->serial->port[COMMAND_PORT];
545 command_info = usb_get_serial_port_data(command_port);
547 if (command_port->bulk_out_size < datasize + 1)
550 mutex_lock(&command_info->mutex);
551 command_info->command_finished = false;
553 transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
554 transfer_buffer[0] = command;
555 memcpy(&transfer_buffer[1], data, datasize);
556 command_port->write_urb->transfer_buffer_length = datasize + 1;
557 retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
559 dev_dbg(dev, "%s - submit urb failed\n", __func__);
563 /* wait for the command to complete */
564 t = wait_event_timeout(command_info->wait_command,
565 (bool)command_info->command_finished, COMMAND_TIMEOUT);
567 usb_kill_urb(command_port->write_urb);
569 if (command_info->command_finished == false) {
570 dev_dbg(dev, "%s - command timed out.\n", __func__);
575 if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
576 dev_dbg(dev, "%s - command failed.\n", __func__);
581 if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
582 dev_dbg(dev, "%s - command completed.\n", __func__);
584 case WHITEHEAT_GET_DTR_RTS:
585 info = usb_get_serial_port_data(port);
586 info->mcr = command_info->result_buffer[0];
591 mutex_unlock(&command_info->mutex);
596 static int firm_open(struct usb_serial_port *port)
598 struct whiteheat_simple open_command;
600 open_command.port = port->port_number + 1;
601 return firm_send_command(port, WHITEHEAT_OPEN,
602 (__u8 *)&open_command, sizeof(open_command));
606 static int firm_close(struct usb_serial_port *port)
608 struct whiteheat_simple close_command;
610 close_command.port = port->port_number + 1;
611 return firm_send_command(port, WHITEHEAT_CLOSE,
612 (__u8 *)&close_command, sizeof(close_command));
616 static void firm_setup_port(struct tty_struct *tty)
618 struct usb_serial_port *port = tty->driver_data;
619 struct device *dev = &port->dev;
620 struct whiteheat_port_settings port_settings;
621 unsigned int cflag = tty->termios.c_cflag;
624 port_settings.port = port->port_number + 1;
626 port_settings.bits = tty_get_char_size(cflag);
627 dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits);
629 /* determine the parity */
633 port_settings.parity = WHITEHEAT_PAR_MARK;
635 port_settings.parity = WHITEHEAT_PAR_SPACE;
638 port_settings.parity = WHITEHEAT_PAR_ODD;
640 port_settings.parity = WHITEHEAT_PAR_EVEN;
642 port_settings.parity = WHITEHEAT_PAR_NONE;
643 dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity);
645 /* figure out the stop bits requested */
647 port_settings.stop = 2;
649 port_settings.stop = 1;
650 dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop);
652 /* figure out the flow control settings */
654 port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
655 WHITEHEAT_HFLOW_RTS);
657 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
658 dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__,
659 (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
660 (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
661 (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
662 (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
664 /* determine software flow control */
666 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
668 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
669 dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow);
671 port_settings.xon = START_CHAR(tty);
672 port_settings.xoff = STOP_CHAR(tty);
673 dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff);
675 /* get the baud rate wanted */
676 baud = tty_get_baud_rate(tty);
677 port_settings.baud = cpu_to_le32(baud);
678 dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud);
680 /* fixme: should set validated settings */
681 tty_encode_baud_rate(tty, baud, baud);
683 /* handle any settings that aren't specified in the tty structure */
684 port_settings.lloop = 0;
686 /* now send the message to the device */
687 firm_send_command(port, WHITEHEAT_SETUP_PORT,
688 (__u8 *)&port_settings, sizeof(port_settings));
692 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
694 struct whiteheat_set_rdb rts_command;
696 rts_command.port = port->port_number + 1;
697 rts_command.state = onoff;
698 return firm_send_command(port, WHITEHEAT_SET_RTS,
699 (__u8 *)&rts_command, sizeof(rts_command));
703 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
705 struct whiteheat_set_rdb dtr_command;
707 dtr_command.port = port->port_number + 1;
708 dtr_command.state = onoff;
709 return firm_send_command(port, WHITEHEAT_SET_DTR,
710 (__u8 *)&dtr_command, sizeof(dtr_command));
714 static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
716 struct whiteheat_set_rdb break_command;
718 break_command.port = port->port_number + 1;
719 break_command.state = onoff;
720 return firm_send_command(port, WHITEHEAT_SET_BREAK,
721 (__u8 *)&break_command, sizeof(break_command));
725 static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
727 struct whiteheat_purge purge_command;
729 purge_command.port = port->port_number + 1;
730 purge_command.what = rxtx;
731 return firm_send_command(port, WHITEHEAT_PURGE,
732 (__u8 *)&purge_command, sizeof(purge_command));
736 static int firm_get_dtr_rts(struct usb_serial_port *port)
738 struct whiteheat_simple get_dr_command;
740 get_dr_command.port = port->port_number + 1;
741 return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
742 (__u8 *)&get_dr_command, sizeof(get_dr_command));
746 static int firm_report_tx_done(struct usb_serial_port *port)
748 struct whiteheat_simple close_command;
750 close_command.port = port->port_number + 1;
751 return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
752 (__u8 *)&close_command, sizeof(close_command));
756 /*****************************************************************************
757 * Connect Tech's White Heat utility functions
758 *****************************************************************************/
759 static int start_command_port(struct usb_serial *serial)
761 struct usb_serial_port *command_port;
762 struct whiteheat_command_private *command_info;
765 command_port = serial->port[COMMAND_PORT];
766 command_info = usb_get_serial_port_data(command_port);
767 mutex_lock(&command_info->mutex);
768 if (!command_info->port_running) {
769 /* Work around HCD bugs */
770 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
772 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
774 dev_err(&serial->dev->dev,
775 "%s - failed submitting read urb, error %d\n",
780 command_info->port_running++;
783 mutex_unlock(&command_info->mutex);
788 static void stop_command_port(struct usb_serial *serial)
790 struct usb_serial_port *command_port;
791 struct whiteheat_command_private *command_info;
793 command_port = serial->port[COMMAND_PORT];
794 command_info = usb_get_serial_port_data(command_port);
795 mutex_lock(&command_info->mutex);
796 command_info->port_running--;
797 if (!command_info->port_running)
798 usb_kill_urb(command_port->read_urb);
799 mutex_unlock(&command_info->mutex);
802 module_usb_serial_driver(serial_drivers, id_table_combined);
804 MODULE_AUTHOR(DRIVER_AUTHOR);
805 MODULE_DESCRIPTION(DRIVER_DESC);
806 MODULE_LICENSE("GPL");