5 * definitions and function prototypes used for the cypress USB to Serial
10 * For sending our feature buffer - controlling serial communication states.
11 * Linux HID has no support for serial devices so we do this through the driver
13 #define HID_REQ_GET_REPORT 0x01
14 #define HID_REQ_SET_REPORT 0x09
16 /* List other cypress USB to Serial devices here, and add them to the id_table */
18 /* DeLorme Earthmate USB - a GPS device */
19 #define VENDOR_ID_DELORME 0x1163
20 #define PRODUCT_ID_EARTHMATEUSB 0x0100
21 #define PRODUCT_ID_EARTHMATEUSB_LT20 0x0200
23 /* Cypress HID->COM RS232 Adapter */
24 #define VENDOR_ID_CYPRESS 0x04b4
25 #define PRODUCT_ID_CYPHIDCOM 0x5500
27 /* Simply Automated HID->COM UPB PIM (using Cypress PID 0x5500) */
28 #define VENDOR_ID_SAI 0x17dd
30 /* FRWD Dongle - a GPS sports watch */
31 #define VENDOR_ID_FRWD 0x6737
32 #define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
34 /* Powercom UPS, chip CY7C63723 */
35 #define VENDOR_ID_POWERCOM 0x0d9f
36 #define PRODUCT_ID_UPS 0x0002
38 /* Nokia CA-42 USB to serial cable */
39 #define VENDOR_ID_DAZZLE 0x07d0
40 #define PRODUCT_ID_CA42 0x4101
41 /* End of device listing */
43 /* Used for setting / requesting serial line settings */
44 #define CYPRESS_SET_CONFIG 0x01
45 #define CYPRESS_GET_CONFIG 0x02
47 /* Used for throttle control */
49 #define ACTUALLY_THROTTLED 0x2
52 * chiptypes - used in case firmware differs from the generic form ... offering
53 * different baud speeds/etc.
55 #define CT_EARTHMATE 0x01
56 #define CT_CYPHIDCOM 0x02
57 #define CT_CA42V2 0x03
58 #define CT_GENERIC 0x0F
59 /* End of chiptype definitions */
62 * RS-232 serial data communication protocol definitions.
64 * These are sent / read at byte 0 of the input/output hid reports.
65 * You can find these values defined in the CY4601 USB to Serial design notes.
68 #define CONTROL_DTR 0x20 /* data terminal ready */
69 #define CONTROL_RTS 0x10 /* request to send */
70 #define CONTROL_RESET 0x08 /* sent with output report */
72 #define UART_MSR_MASK 0xf0
73 #define UART_RI 0x80 /* ring indicator */
74 #define UART_CD 0x40 /* carrier detect */
75 #define UART_DSR 0x20 /* data set ready */
76 #define UART_CTS 0x10 /* clear to send */
77 #define CYP_ERROR 0x08 /* received from input report */
79 /* End of RS-232 protocol definitions */
81 #endif /* CYPRESS_M8_H */