2 * Copyright (c) 2015, Linaro Limited
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 and
6 * only version 2 as published by the Free Software Foundation.
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
14 #include <linux/clk.h>
15 #include <linux/delay.h>
16 #include <linux/device.h>
17 #include <linux/err.h>
18 #include <linux/extcon.h>
19 #include <linux/gpio/consumer.h>
21 #include <linux/module.h>
23 #include <linux/platform_device.h>
24 #include <linux/reboot.h>
25 #include <linux/regulator/consumer.h>
26 #include <linux/reset.h>
27 #include <linux/slab.h>
28 #include <linux/usb.h>
29 #include <linux/usb/ulpi.h>
31 #define HSPHY_AHBBURST 0x0090
32 #define HSPHY_AHBMODE 0x0098
33 #define HSPHY_GENCONFIG 0x009c
34 #define HSPHY_GENCONFIG_2 0x00a0
36 #define HSPHY_USBCMD 0x0140
37 #define HSPHY_ULPI_VIEWPORT 0x0170
38 #define HSPHY_CTRL 0x0240
40 #define HSPHY_TXFIFO_IDLE_FORCE_DIS BIT(4)
41 #define HSPHY_SESS_VLD_CTRL_EN BIT(7)
42 #define HSPHY_POR_ASSERT BIT(0)
43 #define HSPHY_RETEN BIT(1)
45 #define HSPHY_SESS_VLD_CTRL BIT(25)
47 #define ULPI_PWR_CLK_MNG_REG 0x88
48 #define ULPI_PWR_OTG_COMP_DISABLE BIT(0)
50 #define ULPI_MISC_A 0x96
51 #define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1)
52 #define ULPI_MISC_A_VBUSVLDEXT BIT(0)
54 #define HSPHY_3P3_MIN 3050000 /* uV */
55 #define HSPHY_3P3_MAX 3300000 /* uV */
57 #define HSPHY_1P8_MIN 1800000 /* uV */
58 #define HSPHY_1P8_MAX 1800000 /* uV */
60 #define HSPHY_VDD_MIN 5
61 #define HSPHY_VDD_MAX 7
67 struct clk *iface_clk;
68 struct regulator_bulk_data regulator[3];
70 struct reset_control *phy_reset;
72 struct gpio_desc *switch_gpio;
73 struct notifier_block reboot_notify;
76 static int phy_8x16_notify_connect(struct usb_phy *phy,
77 enum usb_device_speed speed)
79 struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
82 val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT;
83 usb_phy_io_write(&qphy->phy, val, ULPI_SET(ULPI_MISC_A));
85 val = readl(qphy->regs + HSPHY_USBCMD);
86 val |= HSPHY_SESS_VLD_CTRL;
87 writel(val, qphy->regs + HSPHY_USBCMD);
92 static int phy_8x16_notify_disconnect(struct usb_phy *phy,
93 enum usb_device_speed speed)
95 struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
98 val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL;
99 usb_phy_io_write(&qphy->phy, val, ULPI_CLR(ULPI_MISC_A));
101 val = readl(qphy->regs + HSPHY_USBCMD);
102 val &= ~HSPHY_SESS_VLD_CTRL;
103 writel(val, qphy->regs + HSPHY_USBCMD);
108 static int phy_8x16_vbus_on(struct phy_8x16 *qphy)
110 phy_8x16_notify_connect(&qphy->phy, USB_SPEED_UNKNOWN);
112 /* Switch D+/D- lines to Device connector */
113 gpiod_set_value_cansleep(qphy->switch_gpio, 0);
118 static int phy_8x16_vbus_off(struct phy_8x16 *qphy)
120 phy_8x16_notify_disconnect(&qphy->phy, USB_SPEED_UNKNOWN);
122 /* Switch D+/D- lines to USB HUB */
123 gpiod_set_value_cansleep(qphy->switch_gpio, 1);
128 static int phy_8x16_vbus_notify(struct notifier_block *nb, unsigned long event,
131 struct usb_phy *usb_phy = container_of(nb, struct usb_phy, vbus_nb);
132 struct phy_8x16 *qphy = container_of(usb_phy, struct phy_8x16, phy);
135 phy_8x16_vbus_on(qphy);
137 phy_8x16_vbus_off(qphy);
142 static int phy_8x16_init(struct usb_phy *phy)
144 struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
145 u32 val, init[] = {0x44, 0x6B, 0x24, 0x13};
146 u32 addr = ULPI_EXT_VENDOR_SPECIFIC;
149 for (idx = 0; idx < ARRAY_SIZE(init); idx++)
150 usb_phy_io_write(phy, init[idx], addr + idx);
152 reset_control_reset(qphy->phy_reset);
154 /* Assert USB HSPHY_POR */
155 val = readl(qphy->regs + HSPHY_CTRL);
156 val |= HSPHY_POR_ASSERT;
157 writel(val, qphy->regs + HSPHY_CTRL);
160 * wait for minimum 10 microseconds as suggested in HPG.
161 * Use a slightly larger value since the exact value didn't
162 * work 100% of the time.
164 usleep_range(12, 15);
166 /* Deassert USB HSPHY_POR */
167 val = readl(qphy->regs + HSPHY_CTRL);
168 val &= ~HSPHY_POR_ASSERT;
169 writel(val, qphy->regs + HSPHY_CTRL);
171 usleep_range(10, 15);
173 writel(0x00, qphy->regs + HSPHY_AHBBURST);
174 writel(0x08, qphy->regs + HSPHY_AHBMODE);
176 /* workaround for rx buffer collision issue */
177 val = readl(qphy->regs + HSPHY_GENCONFIG);
178 val &= ~HSPHY_TXFIFO_IDLE_FORCE_DIS;
179 writel(val, qphy->regs + HSPHY_GENCONFIG);
181 val = readl(qphy->regs + HSPHY_GENCONFIG_2);
182 val |= HSPHY_SESS_VLD_CTRL_EN;
183 writel(val, qphy->regs + HSPHY_GENCONFIG_2);
185 val = ULPI_PWR_OTG_COMP_DISABLE;
186 usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));
188 state = extcon_get_state(qphy->phy.edev, EXTCON_USB);
190 phy_8x16_vbus_on(qphy);
192 phy_8x16_vbus_off(qphy);
194 val = usb_phy_io_read(&qphy->phy, ULPI_FUNC_CTRL);
195 val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
196 val |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
197 usb_phy_io_write(&qphy->phy, val, ULPI_FUNC_CTRL);
202 static void phy_8x16_shutdown(struct usb_phy *phy)
206 /* Put the controller in non-driving mode */
207 val = usb_phy_io_read(phy, ULPI_FUNC_CTRL);
208 val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
209 val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
210 usb_phy_io_write(phy, val, ULPI_FUNC_CTRL);
213 static int phy_8x16_read_devicetree(struct phy_8x16 *qphy)
215 struct device *dev = qphy->phy.dev;
218 qphy->core_clk = devm_clk_get(dev, "core");
219 if (IS_ERR(qphy->core_clk))
220 return PTR_ERR(qphy->core_clk);
222 qphy->iface_clk = devm_clk_get(dev, "iface");
223 if (IS_ERR(qphy->iface_clk))
224 return PTR_ERR(qphy->iface_clk);
226 qphy->regulator[0].supply = "v3p3";
227 qphy->regulator[1].supply = "v1p8";
228 qphy->regulator[2].supply = "vddcx";
230 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->regulator),
235 qphy->phy_reset = devm_reset_control_get(dev, "phy");
236 if (IS_ERR(qphy->phy_reset))
237 return PTR_ERR(qphy->phy_reset);
239 qphy->switch_gpio = devm_gpiod_get_optional(dev, "switch",
241 return PTR_ERR_OR_ZERO(qphy->switch_gpio);
244 static int phy_8x16_reboot_notify(struct notifier_block *this,
245 unsigned long code, void *unused)
247 struct phy_8x16 *qphy;
249 qphy = container_of(this, struct phy_8x16, reboot_notify);
252 * Ensure that D+/D- lines are routed to uB connector, so
253 * we could load bootloader/kernel at next reboot_notify
255 gpiod_set_value_cansleep(qphy->switch_gpio, 0);
259 static int phy_8x16_probe(struct platform_device *pdev)
261 struct phy_8x16 *qphy;
262 struct resource *res;
266 qphy = devm_kzalloc(&pdev->dev, sizeof(*qphy), GFP_KERNEL);
270 platform_set_drvdata(pdev, qphy);
272 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
273 qphy->regs = devm_ioremap_resource(&pdev->dev, res);
274 if (IS_ERR(qphy->regs))
275 return PTR_ERR(qphy->regs);
278 phy->dev = &pdev->dev;
279 phy->label = dev_name(&pdev->dev);
280 phy->init = phy_8x16_init;
281 phy->shutdown = phy_8x16_shutdown;
282 phy->notify_connect = phy_8x16_notify_connect;
283 phy->notify_disconnect = phy_8x16_notify_disconnect;
284 phy->io_priv = qphy->regs + HSPHY_ULPI_VIEWPORT;
285 phy->io_ops = &ulpi_viewport_access_ops;
286 phy->type = USB_PHY_TYPE_USB2;
287 phy->vbus_nb.notifier_call = phy_8x16_vbus_notify;
288 phy->id_nb.notifier_call = NULL;
290 ret = phy_8x16_read_devicetree(qphy);
294 ret = clk_set_rate(qphy->core_clk, INT_MAX);
296 dev_dbg(phy->dev, "Can't boost core clock\n");
298 ret = clk_prepare_enable(qphy->core_clk);
302 ret = clk_prepare_enable(qphy->iface_clk);
306 ret = regulator_bulk_enable(ARRAY_SIZE(qphy->regulator),
311 ret = usb_add_phy_dev(&qphy->phy);
315 qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify;
316 register_reboot_notifier(&qphy->reboot_notify);
321 regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
323 clk_disable_unprepare(qphy->iface_clk);
325 clk_disable_unprepare(qphy->core_clk);
329 static int phy_8x16_remove(struct platform_device *pdev)
331 struct phy_8x16 *qphy = platform_get_drvdata(pdev);
333 unregister_reboot_notifier(&qphy->reboot_notify);
336 * Ensure that D+/D- lines are routed to uB connector, so
337 * we could load bootloader/kernel at next reboot_notify
339 gpiod_set_value_cansleep(qphy->switch_gpio, 0);
341 usb_remove_phy(&qphy->phy);
343 clk_disable_unprepare(qphy->iface_clk);
344 clk_disable_unprepare(qphy->core_clk);
345 regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
349 static const struct of_device_id phy_8x16_dt_match[] = {
350 { .compatible = "qcom,usb-8x16-phy" },
353 MODULE_DEVICE_TABLE(of, phy_8x16_dt_match);
355 static struct platform_driver phy_8x16_driver = {
356 .probe = phy_8x16_probe,
357 .remove = phy_8x16_remove,
359 .name = "phy-qcom-8x16-usb",
360 .of_match_table = phy_8x16_dt_match,
363 module_platform_driver(phy_8x16_driver);
365 MODULE_LICENSE("GPL v2");
366 MODULE_DESCRIPTION("Qualcomm APQ8016/MSM8916 chipsets USB transceiver driver");