2 # USB Miscellaneous driver configuration
4 comment "USB Miscellaneous drivers"
7 tristate "EMI 6|2m USB Audio interface support"
9 This driver loads firmware to Emagic EMI 6|2m low latency USB
10 Audio and Midi interface.
12 After firmware load the device is handled with standard linux
15 This code is also available as a module ( = code which can be
16 inserted in and removed from the running kernel whenever you want).
17 The module will be called audio. If you want to compile it as a
18 module, say M here and read <file:Documentation/kbuild/modules.txt>.
21 tristate "EMI 2|6 USB Audio interface support"
23 This driver loads firmware to Emagic EMI 2|6 low latency USB
26 After firmware load the device is handled with standard linux
29 To compile this driver as a module, choose M here: the
30 module will be called emi26.
33 tristate "ADU devices from Ontrak Control Systems"
35 Say Y if you want to use an ADU device from Ontrak Control
38 To compile this driver as a module, choose M here. The module
39 will be called adutux.
42 tristate "USB 7-Segment LED Display"
44 Say Y here if you have a USB 7-Segment Display by Delcom
46 To compile this driver as a module, choose M here: the
47 module will be called usbsevseg.
50 tristate "USB Lego Infrared Tower support"
52 Say Y here if you want to connect a USB Lego Infrared Tower to your
55 This code is also available as a module ( = code which can be
56 inserted in and removed from the running kernel whenever you want).
57 The module will be called legousbtower. If you want to compile it as
58 a module, say M here and read
59 <file:Documentation/kbuild/modules.txt>.
62 tristate "USB LCD driver support"
64 Say Y here if you want to connect an USBLCD to your computer's
65 USB port. The USBLCD is a small USB interface board for
66 alphanumeric LCD modules. See <http://www.usblcd.de/> for more
69 To compile this driver as a module, choose M here: the
70 module will be called usblcd.
72 config USB_CYPRESS_CY7C63
73 tristate "Cypress CY7C63xxx USB driver support"
75 Say Y here if you want to connect a Cypress CY7C63xxx
76 micro controller to your computer's USB port. Currently this
77 driver supports the pre-programmed devices (incl. firmware)
78 by AK Modul-Bus Computer GmbH.
80 Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html
82 To compile this driver as a module, choose M here: the
83 module will be called cypress_cy7c63.
86 tristate "Cypress USB thermometer driver support"
88 Say Y here if you want to connect a Cypress USB thermometer
89 device to your computer's USB port. This device is also known
90 as the Cypress USB Starter kit or demo board. The Elektor
91 magazine published a modified version of this device in issue
94 To compile this driver as a module, choose M here: the
95 module will be called cytherm.
98 tristate "Siemens ID USB Mouse Fingerprint sensor support"
100 Say Y here if you want to use the fingerprint sensor on
101 the Siemens ID Mouse. There is also a Siemens ID Mouse
102 _Professional_, which has not been tested with this driver,
103 but uses the same sensor and may therefore work.
105 This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
106 which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
108 See also <http://www.fs.tum.de/~echtler/idmouse/>.
111 tristate "Elan PCMCIA CardBus Adapter USB Client"
113 ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
114 Currently only the U132 adapter is available.
116 The U132 is specifically designed for CardBus PC cards that contain
117 an OHCI host controller. Typical PC cards are the Orange Mobile 3G
118 Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
119 with PC cards that do not contain an OHCI controller. To use a U132
120 adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
121 module which is a USB host controller driver that talks to the OHCI
122 controller within CardBus card that are inserted in the U132 adapter.
124 This driver has been tested with a CardBus OHCI USB adapter, and
125 worked with a USB PEN Drive inserted into the first USB port of
126 the PCCARD. A rather pointless thing to do, but useful for testing.
128 See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"
130 It is safe to say M here.
132 config USB_APPLEDISPLAY
133 tristate "Apple Cinema Display support"
134 select BACKLIGHT_LCD_SUPPORT
135 select BACKLIGHT_CLASS_DEVICE
137 Say Y here if you want to control the backlight of Apple Cinema
138 Displays over USB. This driver provides a sysfs interface.
140 source "drivers/usb/misc/sisusbvga/Kconfig"
143 tristate "USB LD driver"
145 This driver is for generic USB devices that use interrupt transfers,
146 like LD Didactic's USB devices.
148 To compile this driver as a module, choose M here: the
149 module will be called ldusb.
151 config USB_TRANCEVIBRATOR
152 tristate "PlayStation 2 Trance Vibrator driver support"
154 Say Y here if you want to connect a PlayStation 2 Trance Vibrator
155 device to your computer's USB port.
157 To compile this driver as a module, choose M here: the
158 module will be called trancevibrator.
161 tristate "IO Warrior driver support"
163 Say Y here if you want to support the IO Warrior devices from Code
164 Mercenaries. This includes support for the following devices:
168 IO Warrior 24 Power Vampire
170 To compile this driver as a module, choose M here: the
171 module will be called iowarrior.
174 tristate "USB testing driver"
176 This driver is for testing host controller software. It is used
177 with specialized device firmware for regression and stress testing,
178 to help prevent problems from cropping up with "real" drivers.
180 See <http://www.linux-usb.org/usbtest/> for more information,
181 including sample test device firmware and "how to use it".
183 config USB_EHSET_TEST_FIXTURE
184 tristate "USB EHSET Test Fixture driver"
186 Say Y here if you want to support the special test fixture device
187 used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
189 When the test fixture is connected, it can enumerate as one of several
190 VID/PID pairs. This driver then initiates a corresponding test mode on
191 the downstream port to which the test fixture is attached.
193 See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more
197 tristate "iSight firmware loading support"
200 This driver loads firmware for USB Apple iSight cameras, allowing
201 them to be driven by the USB video class driver available at
202 http://linux-uvc.berlios.de
204 The firmware for this driver must be extracted from the MacOS
205 driver beforehand. Tools for doing so are available at
206 http://bersace03.free.fr
209 tristate "USB YUREX driver support"
211 Say Y here if you want to connect a YUREX to your computer's
212 USB port. The YUREX is a leg-shakes sensor. See
213 <http://bbu.kayac.com/en/> for further information.
214 This driver supports read/write of leg-shakes counter and
215 fasync for the counter update via a device file /dev/yurex*.
217 To compile this driver as a module, choose M here: the
218 module will be called yurex.
221 tristate "Functions for loading firmware on EZUSB chips"
223 Say Y here if you need EZUSB device support.
224 (Cypress FX/FX2/FX2LP microcontrollers)
226 config USB_HUB_USB251XB
227 tristate "USB251XB Hub Controller Configuration Driver"
230 This option enables support for configuration via SMBus of the
231 Microchip USB251xB/xBi USB 2.0 Hub Controller series.
232 Configuration parameters may be set in devicetree or platform data.
233 Say Y or M here if you need to configure such a device via SMBus.
235 config USB_HSIC_USB3503
236 tristate "USB3503 HSIC to USB20 Driver"
240 This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
242 config USB_HSIC_USB4604
243 tristate "USB4604 HSIC to USB20 Driver"
246 This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
248 config USB_LINK_LAYER_TEST
249 tristate "USB Link Layer Test driver"
251 This driver is for generating specific traffic for Super Speed Link
252 Layer Test Device. Say Y only when you want to conduct USB Super Speed
253 Link Layer Test for host controllers.
256 tristate "ChaosKey random number generator driver support"
259 Say Y here if you want to connect an AltusMetrum ChaosKey or
260 Araneus Alea I to your computer's USB port. These devices
261 are hardware random number generators which hook into the
262 kernel entropy pool to ensure a large supply of entropy for
263 /dev/random and /dev/urandom and also provides direct access
266 To compile this driver as a module, choose M here: the
267 module will be called chaoskey.