GNU Linux-libre 5.10.217-gnu1
[releases.git] / drivers / usb / host / xhci-mvebu.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2014 Marvell
4  * Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
5  */
6
7 #include <linux/io.h>
8 #include <linux/mbus.h>
9 #include <linux/of.h>
10 #include <linux/platform_device.h>
11 #include <linux/phy/phy.h>
12
13 #include <linux/usb.h>
14 #include <linux/usb/hcd.h>
15
16 #include "xhci-mvebu.h"
17 #include "xhci.h"
18
19 #define USB3_MAX_WINDOWS        4
20 #define USB3_WIN_CTRL(w)        (0x0 + ((w) * 8))
21 #define USB3_WIN_BASE(w)        (0x4 + ((w) * 8))
22
23 static void xhci_mvebu_mbus_config(void __iomem *base,
24                         const struct mbus_dram_target_info *dram)
25 {
26         int win;
27
28         /* Clear all existing windows */
29         for (win = 0; win < USB3_MAX_WINDOWS; win++) {
30                 writel(0, base + USB3_WIN_CTRL(win));
31                 writel(0, base + USB3_WIN_BASE(win));
32         }
33
34         /* Program each DRAM CS in a seperate window */
35         for (win = 0; win < dram->num_cs; win++) {
36                 const struct mbus_dram_window *cs = &dram->cs[win];
37
38                 writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
39                        (dram->mbus_dram_target_id << 4) | 1,
40                        base + USB3_WIN_CTRL(win));
41
42                 writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(win));
43         }
44 }
45
46 int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
47 {
48         struct device *dev = hcd->self.controller;
49         struct platform_device *pdev = to_platform_device(dev);
50         struct resource *res;
51         void __iomem *base;
52         const struct mbus_dram_target_info *dram;
53
54         res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
55         if (!res)
56                 return -ENODEV;
57
58         /*
59          * We don't use devm_ioremap() because this mapping should
60          * only exists for the duration of this probe function.
61          */
62         base = ioremap(res->start, resource_size(res));
63         if (!base)
64                 return -ENODEV;
65
66         dram = mv_mbus_dram_info();
67         xhci_mvebu_mbus_config(base, dram);
68
69         /*
70          * This memory area was only needed to configure the MBus
71          * windows, and is therefore no longer useful.
72          */
73         iounmap(base);
74
75         return 0;
76 }
77
78 int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd)
79 {
80         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
81         struct device *dev = hcd->self.controller;
82         struct phy *phy;
83         int ret;
84
85         /* Old bindings miss the PHY handle */
86         phy = of_phy_get(dev->of_node, "usb3-phy");
87         if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER)
88                 return -EPROBE_DEFER;
89         else if (IS_ERR(phy))
90                 goto phy_out;
91
92         ret = phy_init(phy);
93         if (ret)
94                 goto phy_put;
95
96         ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS);
97         if (ret)
98                 goto phy_exit;
99
100         ret = phy_power_on(phy);
101         if (ret == -EOPNOTSUPP) {
102                 /* Skip initializatin of XHCI PHY when it is unsupported by firmware */
103                 dev_warn(dev, "PHY unsupported by firmware\n");
104                 xhci->quirks |= XHCI_SKIP_PHY_INIT;
105         }
106         if (ret)
107                 goto phy_exit;
108
109         phy_power_off(phy);
110 phy_exit:
111         phy_exit(phy);
112 phy_put:
113         of_phy_put(phy);
114 phy_out:
115
116         return 0;
117 }
118
119 int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
120 {
121         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
122
123         /* Without reset on resume, the HC won't work at all */
124         xhci->quirks |= XHCI_RESET_ON_RESUME;
125
126         return 0;
127 }