GNU Linux-libre 4.14.251-gnu1
[releases.git] / drivers / usb / host / ohci-da8xx.c
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  * TI DA8xx (OMAP-L1x) Bus Glue
5  *
6  * Derived from: ohci-omap.c and ohci-s3c2410.c
7  * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
8  *
9  * This file is licensed under the terms of the GNU General Public License
10  * version 2. This program is licensed "as is" without any warranty of any
11  * kind, whether express or implied.
12  */
13
14 #include <linux/clk.h>
15 #include <linux/io.h>
16 #include <linux/interrupt.h>
17 #include <linux/jiffies.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/platform_device.h>
21 #include <linux/phy/phy.h>
22 #include <linux/platform_data/usb-davinci.h>
23 #include <linux/regulator/consumer.h>
24 #include <linux/usb.h>
25 #include <linux/usb/hcd.h>
26 #include <asm/unaligned.h>
27
28 #include "ohci.h"
29
30 #define DRIVER_DESC "DA8XX"
31 #define DRV_NAME "ohci-da8xx"
32
33 static struct hc_driver __read_mostly ohci_da8xx_hc_driver;
34
35 static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
36                         u16 wValue, u16 wIndex, char *buf, u16 wLength);
37 static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
38
39 struct da8xx_ohci_hcd {
40         struct usb_hcd *hcd;
41         struct clk *usb11_clk;
42         struct phy *usb11_phy;
43         struct regulator *vbus_reg;
44         struct notifier_block nb;
45         unsigned int reg_enabled;
46 };
47
48 #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
49
50 /* Over-current indicator change bitmask */
51 static volatile u16 ocic_mask;
52
53 static int ohci_da8xx_enable(struct usb_hcd *hcd)
54 {
55         struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
56         int ret;
57
58         ret = clk_prepare_enable(da8xx_ohci->usb11_clk);
59         if (ret)
60                 return ret;
61
62         ret = phy_init(da8xx_ohci->usb11_phy);
63         if (ret)
64                 goto err_phy_init;
65
66         ret = phy_power_on(da8xx_ohci->usb11_phy);
67         if (ret)
68                 goto err_phy_power_on;
69
70         return 0;
71
72 err_phy_power_on:
73         phy_exit(da8xx_ohci->usb11_phy);
74 err_phy_init:
75         clk_disable_unprepare(da8xx_ohci->usb11_clk);
76
77         return ret;
78 }
79
80 static void ohci_da8xx_disable(struct usb_hcd *hcd)
81 {
82         struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
83
84         phy_power_off(da8xx_ohci->usb11_phy);
85         phy_exit(da8xx_ohci->usb11_phy);
86         clk_disable_unprepare(da8xx_ohci->usb11_clk);
87 }
88
89 static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
90 {
91         struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
92         struct device *dev              = hcd->self.controller;
93         struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
94         int ret;
95
96         if (hub && hub->set_power)
97                 return hub->set_power(1, on);
98
99         if (!da8xx_ohci->vbus_reg)
100                 return 0;
101
102         if (on && !da8xx_ohci->reg_enabled) {
103                 ret = regulator_enable(da8xx_ohci->vbus_reg);
104                 if (ret) {
105                         dev_err(dev, "Failed to enable regulator: %d\n", ret);
106                         return ret;
107                 }
108                 da8xx_ohci->reg_enabled = 1;
109
110         } else if (!on && da8xx_ohci->reg_enabled) {
111                 ret = regulator_disable(da8xx_ohci->vbus_reg);
112                 if (ret) {
113                         dev_err(dev, "Failed  to disable regulator: %d\n", ret);
114                         return ret;
115                 }
116                 da8xx_ohci->reg_enabled = 0;
117         }
118
119         return 0;
120 }
121
122 static int ohci_da8xx_get_power(struct usb_hcd *hcd)
123 {
124         struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
125         struct device *dev              = hcd->self.controller;
126         struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
127
128         if (hub && hub->get_power)
129                 return hub->get_power(1);
130
131         if (da8xx_ohci->vbus_reg)
132                 return regulator_is_enabled(da8xx_ohci->vbus_reg);
133
134         return 1;
135 }
136
137 static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
138 {
139         struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
140         struct device *dev              = hcd->self.controller;
141         struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
142         unsigned int flags;
143         int ret;
144
145         if (hub && hub->get_oci)
146                 return hub->get_oci(1);
147
148         if (!da8xx_ohci->vbus_reg)
149                 return 0;
150
151         ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags);
152         if (ret)
153                 return ret;
154
155         if (flags & REGULATOR_ERROR_OVER_CURRENT)
156                 return 1;
157
158         return 0;
159 }
160
161 static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
162 {
163         struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
164         struct device *dev              = hcd->self.controller;
165         struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
166
167         if (hub && hub->set_power)
168                 return 1;
169
170         if (da8xx_ohci->vbus_reg)
171                 return 1;
172
173         return 0;
174 }
175
176 static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
177 {
178         struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
179         struct device *dev              = hcd->self.controller;
180         struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
181
182         if (hub && hub->get_oci)
183                 return 1;
184
185         if (da8xx_ohci->vbus_reg)
186                 return 1;
187
188         return 0;
189 }
190
191 static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
192 {
193         struct device *dev              = hcd->self.controller;
194         struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
195
196         if (hub && hub->potpgt)
197                 return 1;
198
199         return 0;
200 }
201
202 /*
203  * Handle the port over-current indicator change.
204  */
205 static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
206                                     unsigned port)
207 {
208         ocic_mask |= 1 << port;
209
210         /* Once over-current is detected, the port needs to be powered down */
211         if (hub->get_oci(port) > 0)
212                 hub->set_power(port, 0);
213 }
214
215 static int ohci_da8xx_regulator_event(struct notifier_block *nb,
216                                 unsigned long event, void *data)
217 {
218         struct da8xx_ohci_hcd *da8xx_ohci =
219                                 container_of(nb, struct da8xx_ohci_hcd, nb);
220
221         if (event & REGULATOR_EVENT_OVER_CURRENT) {
222                 ocic_mask |= 1 << 1;
223                 ohci_da8xx_set_power(da8xx_ohci->hcd, 0);
224         }
225
226         return 0;
227 }
228
229 static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
230 {
231         struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
232         struct device *dev              = hcd->self.controller;
233         struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
234         int ret = 0;
235
236         if (hub && hub->ocic_notify) {
237                 ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
238         } else if (da8xx_ohci->vbus_reg) {
239                 da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
240                 ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
241                                                 &da8xx_ohci->nb);
242         }
243
244         if (ret)
245                 dev_err(dev, "Failed to register notifier: %d\n", ret);
246
247         return ret;
248 }
249
250 static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
251 {
252         struct device *dev              = hcd->self.controller;
253         struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
254
255         if (hub && hub->ocic_notify)
256                 hub->ocic_notify(NULL);
257 }
258
259 static int ohci_da8xx_reset(struct usb_hcd *hcd)
260 {
261         struct device *dev              = hcd->self.controller;
262         struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
263         struct ohci_hcd *ohci           = hcd_to_ohci(hcd);
264         int result;
265         u32 rh_a;
266
267         dev_dbg(dev, "starting USB controller\n");
268
269         result = ohci_da8xx_enable(hcd);
270         if (result < 0)
271                 return result;
272
273         /*
274          * DA8xx only have 1 port connected to the pins but the HC root hub
275          * register A reports 2 ports, thus we'll have to override it...
276          */
277         ohci->num_ports = 1;
278
279         result = ohci_setup(hcd);
280         if (result < 0) {
281                 ohci_da8xx_disable(hcd);
282                 return result;
283         }
284
285         /*
286          * Since we're providing a board-specific root hub port power control
287          * and over-current reporting, we have to override the HC root hub A
288          * register's default value, so that ohci_hub_control() could return
289          * the correct hub descriptor...
290          */
291         rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
292         if (ohci_da8xx_has_set_power(hcd)) {
293                 rh_a &= ~RH_A_NPS;
294                 rh_a |=  RH_A_PSM;
295         }
296         if (ohci_da8xx_has_oci(hcd)) {
297                 rh_a &= ~RH_A_NOCP;
298                 rh_a |=  RH_A_OCPM;
299         }
300         if (ohci_da8xx_has_potpgt(hcd)) {
301                 rh_a &= ~RH_A_POTPGT;
302                 rh_a |= hub->potpgt << 24;
303         }
304         ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
305
306         return result;
307 }
308
309 /*
310  * Update the status data from the hub with the over-current indicator change.
311  */
312 static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
313 {
314         int length              = orig_ohci_hub_status_data(hcd, buf);
315
316         /* See if we have OCIC bit set on port 1 */
317         if (ocic_mask & (1 << 1)) {
318                 dev_dbg(hcd->self.controller, "over-current indicator change "
319                         "on port 1\n");
320
321                 if (!length)
322                         length = 1;
323
324                 buf[0] |= 1 << 1;
325         }
326         return length;
327 }
328
329 /*
330  * Look at the control requests to the root hub and see if we need to override.
331  */
332 static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
333                                   u16 wIndex, char *buf, u16 wLength)
334 {
335         struct device *dev              = hcd->self.controller;
336         int temp;
337
338         switch (typeReq) {
339         case GetPortStatus:
340                 /* Check the port number */
341                 if (wIndex != 1)
342                         break;
343
344                 dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);
345
346                 temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
347
348                 /* The port power status (PPS) bit defaults to 1 */
349                 if (!ohci_da8xx_get_power(hcd))
350                         temp &= ~RH_PS_PPS;
351
352                 /* The port over-current indicator (POCI) bit is always 0 */
353                 if (ohci_da8xx_get_oci(hcd) > 0)
354                         temp |=  RH_PS_POCI;
355
356                 /* The over-current indicator change (OCIC) bit is 0 too */
357                 if (ocic_mask & (1 << wIndex))
358                         temp |=  RH_PS_OCIC;
359
360                 put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
361                 return 0;
362         case SetPortFeature:
363                 temp = 1;
364                 goto check_port;
365         case ClearPortFeature:
366                 temp = 0;
367
368 check_port:
369                 /* Check the port number */
370                 if (wIndex != 1)
371                         break;
372
373                 switch (wValue) {
374                 case USB_PORT_FEAT_POWER:
375                         dev_dbg(dev, "%sPortFeature(%u): %s\n",
376                                 temp ? "Set" : "Clear", wIndex, "POWER");
377
378                         return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0;
379                 case USB_PORT_FEAT_C_OVER_CURRENT:
380                         dev_dbg(dev, "%sPortFeature(%u): %s\n",
381                                 temp ? "Set" : "Clear", wIndex,
382                                 "C_OVER_CURRENT");
383
384                         if (temp)
385                                 ocic_mask |= 1 << wIndex;
386                         else
387                                 ocic_mask &= ~(1 << wIndex);
388                         return 0;
389                 }
390         }
391
392         return orig_ohci_hub_control(hcd, typeReq, wValue,
393                         wIndex, buf, wLength);
394 }
395
396 /*-------------------------------------------------------------------------*/
397 #ifdef CONFIG_OF
398 static const struct of_device_id da8xx_ohci_ids[] = {
399         { .compatible = "ti,da830-ohci" },
400         { }
401 };
402 MODULE_DEVICE_TABLE(of, da8xx_ohci_ids);
403 #endif
404
405 static int ohci_da8xx_probe(struct platform_device *pdev)
406 {
407         struct da8xx_ohci_hcd *da8xx_ohci;
408         struct usb_hcd  *hcd;
409         struct resource *mem;
410         int error, irq;
411         hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
412                                 dev_name(&pdev->dev));
413         if (!hcd)
414                 return -ENOMEM;
415
416         da8xx_ohci = to_da8xx_ohci(hcd);
417         da8xx_ohci->hcd = hcd;
418
419         da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11");
420         if (IS_ERR(da8xx_ohci->usb11_clk)) {
421                 error = PTR_ERR(da8xx_ohci->usb11_clk);
422                 if (error != -EPROBE_DEFER)
423                         dev_err(&pdev->dev, "Failed to get clock.\n");
424                 goto err;
425         }
426
427         da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
428         if (IS_ERR(da8xx_ohci->usb11_phy)) {
429                 error = PTR_ERR(da8xx_ohci->usb11_phy);
430                 if (error != -EPROBE_DEFER)
431                         dev_err(&pdev->dev, "Failed to get phy.\n");
432                 goto err;
433         }
434
435         da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus");
436         if (IS_ERR(da8xx_ohci->vbus_reg)) {
437                 error = PTR_ERR(da8xx_ohci->vbus_reg);
438                 if (error == -ENODEV) {
439                         da8xx_ohci->vbus_reg = NULL;
440                 } else if (error == -EPROBE_DEFER) {
441                         goto err;
442                 } else {
443                         dev_err(&pdev->dev, "Failed to get regulator\n");
444                         goto err;
445                 }
446         }
447
448         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
449         hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
450         if (IS_ERR(hcd->regs)) {
451                 error = PTR_ERR(hcd->regs);
452                 goto err;
453         }
454         hcd->rsrc_start = mem->start;
455         hcd->rsrc_len = resource_size(mem);
456
457         irq = platform_get_irq(pdev, 0);
458         if (irq < 0) {
459                 error = -ENODEV;
460                 goto err;
461         }
462
463         error = usb_add_hcd(hcd, irq, 0);
464         if (error)
465                 goto err;
466
467         device_wakeup_enable(hcd->self.controller);
468
469         error = ohci_da8xx_register_notify(hcd);
470         if (error)
471                 goto err_remove_hcd;
472
473         return 0;
474
475 err_remove_hcd:
476         usb_remove_hcd(hcd);
477 err:
478         usb_put_hcd(hcd);
479         return error;
480 }
481
482 static int ohci_da8xx_remove(struct platform_device *pdev)
483 {
484         struct usb_hcd  *hcd = platform_get_drvdata(pdev);
485
486         ohci_da8xx_unregister_notify(hcd);
487         usb_remove_hcd(hcd);
488         usb_put_hcd(hcd);
489
490         return 0;
491 }
492
493 #ifdef CONFIG_PM
494 static int ohci_da8xx_suspend(struct platform_device *pdev,
495                                 pm_message_t message)
496 {
497         struct usb_hcd  *hcd    = platform_get_drvdata(pdev);
498         struct ohci_hcd *ohci   = hcd_to_ohci(hcd);
499         bool            do_wakeup       = device_may_wakeup(&pdev->dev);
500         int             ret;
501
502
503         if (time_before(jiffies, ohci->next_statechange))
504                 msleep(5);
505         ohci->next_statechange = jiffies;
506
507         ret = ohci_suspend(hcd, do_wakeup);
508         if (ret)
509                 return ret;
510
511         ohci_da8xx_disable(hcd);
512         hcd->state = HC_STATE_SUSPENDED;
513
514         return ret;
515 }
516
517 static int ohci_da8xx_resume(struct platform_device *dev)
518 {
519         struct usb_hcd  *hcd    = platform_get_drvdata(dev);
520         struct ohci_hcd *ohci   = hcd_to_ohci(hcd);
521         int ret;
522
523         if (time_before(jiffies, ohci->next_statechange))
524                 msleep(5);
525         ohci->next_statechange = jiffies;
526
527         ret = ohci_da8xx_enable(hcd);
528         if (ret)
529                 return ret;
530
531         ohci_resume(hcd, false);
532
533         return 0;
534 }
535 #endif
536
537 static const struct ohci_driver_overrides da8xx_overrides __initconst = {
538         .reset           = ohci_da8xx_reset,
539         .extra_priv_size = sizeof(struct da8xx_ohci_hcd),
540 };
541
542 /*
543  * Driver definition to register with platform structure.
544  */
545 static struct platform_driver ohci_hcd_da8xx_driver = {
546         .probe          = ohci_da8xx_probe,
547         .remove         = ohci_da8xx_remove,
548         .shutdown       = usb_hcd_platform_shutdown,
549 #ifdef  CONFIG_PM
550         .suspend        = ohci_da8xx_suspend,
551         .resume         = ohci_da8xx_resume,
552 #endif
553         .driver         = {
554                 .name   = DRV_NAME,
555                 .of_match_table = of_match_ptr(da8xx_ohci_ids),
556         },
557 };
558
559 static int __init ohci_da8xx_init(void)
560 {
561
562         if (usb_disabled())
563                 return -ENODEV;
564
565         pr_info("%s: " DRIVER_DESC "\n", DRV_NAME);
566         ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides);
567
568         /*
569          * The Davinci da8xx HW has some unusual quirks, which require
570          * da8xx-specific workarounds. We override certain hc_driver
571          * functions here to achieve that. We explicitly do not enhance
572          * ohci_driver_overrides to allow this more easily, since this
573          * is an unusual case, and we don't want to encourage others to
574          * override these functions by making it too easy.
575          */
576
577         orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control;
578         orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data;
579
580         ohci_da8xx_hc_driver.hub_status_data     = ohci_da8xx_hub_status_data;
581         ohci_da8xx_hc_driver.hub_control         = ohci_da8xx_hub_control;
582
583         return platform_driver_register(&ohci_hcd_da8xx_driver);
584 }
585 module_init(ohci_da8xx_init);
586
587 static void __exit ohci_da8xx_exit(void)
588 {
589         platform_driver_unregister(&ohci_hcd_da8xx_driver);
590 }
591 module_exit(ohci_da8xx_exit);
592 MODULE_DESCRIPTION(DRIVER_DESC);
593 MODULE_LICENSE("GPL");
594 MODULE_ALIAS("platform:" DRV_NAME);