drivers/usb/host/ehci-q.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2001-2004 by David Brownell
   4  */
   5
   6 /* this file is part of ehci-hcd.c */
   7
   8 /*-------------------------------------------------------------------------*/
   9
  10 /*
  11  * EHCI hardware queue manipulation ... the core.  QH/QTD manipulation.
  12  *
  13  * Control, bulk, and interrupt traffic all use "qh" lists.  They list "qtd"
  14  * entries describing USB transactions, max 16-20kB/entry (with 4kB-aligned
  15  * buffers needed for the larger number).  We use one QH per endpoint, queue
  16  * multiple urbs (all three types) per endpoint.  URBs may need several qtds.
  17  *
  18  * ISO traffic uses "ISO TD" (itd, and sitd) records, and (along with
  19  * interrupts) needs careful scheduling.  Performance improvements can be
  20  * an ongoing challenge.  That's in "ehci-sched.c".
  21  *
  22  * USB 1.1 devices are handled (a) by "companion" OHCI or UHCI root hubs,
  23  * or otherwise through transaction translators (TTs) in USB 2.0 hubs using
  24  * (b) special fields in qh entries or (c) split iso entries.  TTs will
  25  * buffer low/full speed data so the host collects it at high speed.
  26  */
  27
  28 /*-------------------------------------------------------------------------*/
  29
  30 /* PID Codes that are used here, from EHCI specification, Table 3-16. */
  31 #define PID_CODE_IN    1
  32 #define PID_CODE_SETUP 2
  33
  34 /* fill a qtd, returning how much of the buffer we were able to queue up */
  35
  36 static unsigned int
  37 qtd_fill(struct ehci_hcd *ehci, struct ehci_qtd *qtd, dma_addr_t buf,
  38                   size_t len, int token, int maxpacket)
  39 {
  40         unsigned int count;
  41         u64     addr = buf;
  42         int     i;
  43
  44         /* one buffer entry per 4K ... first might be short or unaligned */
  45         qtd->hw_buf[0] = cpu_to_hc32(ehci, (u32)addr);
  46         qtd->hw_buf_hi[0] = cpu_to_hc32(ehci, (u32)(addr >> 32));
  47         count = 0x1000 - (buf & 0x0fff);        /* rest of that page */
  48         if (likely (len < count))               /* ... iff needed */
  49                 count = len;
  50         else {
  51                 buf +=  0x1000;
  52                 buf &= ~0x0fff;
  53
  54                 /* per-qtd limit: from 16K to 20K (best alignment) */
  55                 for (i = 1; count < len && i < 5; i++) {
  56                         addr = buf;
  57                         qtd->hw_buf[i] = cpu_to_hc32(ehci, (u32)addr);
  58                         qtd->hw_buf_hi[i] = cpu_to_hc32(ehci,
  59                                         (u32)(addr >> 32));
  60                         buf += 0x1000;
  61                         if ((count + 0x1000) < len)
  62                                 count += 0x1000;
  63                         else
  64                                 count = len;
  65                 }
  66
  67                 /* short packets may only terminate transfers */
  68                 if (count != len)
  69                         count -= (count % maxpacket);
  70         }
  71         qtd->hw_token = cpu_to_hc32(ehci, (count << 16) | token);
  72         qtd->length = count;
  73
  74         return count;
  75 }
  76
  77 /*-------------------------------------------------------------------------*/
  78
  79 static inline void
  80 qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
  81 {
  82         struct ehci_qh_hw *hw = qh->hw;
  83
  84         /* writes to an active overlay are unsafe */
  85         WARN_ON(qh->qh_state != QH_STATE_IDLE);
  86
  87         hw->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
  88         hw->hw_alt_next = EHCI_LIST_END(ehci);
  89
  90         /* Except for control endpoints, we make hardware maintain data
  91          * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
  92          * and set the pseudo-toggle in udev. Only usb_clear_halt() will
  93          * ever clear it.
  94          */
  95         if (!(hw->hw_info1 & cpu_to_hc32(ehci, QH_TOGGLE_CTL))) {
  96                 unsigned        is_out, epnum;
  97
  98                 is_out = qh->is_out;
  99                 epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f;
 100                 if (unlikely(!usb_gettoggle(qh->ps.udev, epnum, is_out))) {
 101                         hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
 102                         usb_settoggle(qh->ps.udev, epnum, is_out, 1);
 103                 }
 104         }
 105
 106         hw->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
 107 }
 108
 109 /* if it weren't for a common silicon quirk (writing the dummy into the qh
 110  * overlay, so qh->hw_token wrongly becomes inactive/halted), only fault
 111  * recovery (including urb dequeue) would need software changes to a QH...
 112  */
 113 static void
 114 qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 115 {
 116         struct ehci_qtd *qtd;
 117
 118         qtd = list_entry(qh->qtd_list.next, struct ehci_qtd, qtd_list);
 119
 120         /*
 121          * first qtd may already be partially processed.
 122          * If we come here during unlink, the QH overlay region
 123          * might have reference to the just unlinked qtd. The
 124          * qtd is updated in qh_completions(). Update the QH
 125          * overlay here.
 126          */
 127         if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
 128                 qh->hw->hw_qtd_next = qtd->hw_next;
 129                 if (qh->should_be_inactive)
 130                         ehci_warn(ehci, "qh %p should be inactive!\n", qh);
 131         } else {
 132                 qh_update(ehci, qh, qtd);
 133         }
 134         qh->should_be_inactive = 0;
 135 }
 136
 137 /*-------------------------------------------------------------------------*/
 138
 139 static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
 140
 141 static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
 142                 struct usb_host_endpoint *ep)
 143 {
 144         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
 145         struct ehci_qh          *qh = ep->hcpriv;
 146         unsigned long           flags;
 147
 148         spin_lock_irqsave(&ehci->lock, flags);
 149         qh->clearing_tt = 0;
 150         if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
 151                         && ehci->rh_state == EHCI_RH_RUNNING)
 152                 qh_link_async(ehci, qh);
 153         spin_unlock_irqrestore(&ehci->lock, flags);
 154 }
 155
 156 static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
 157                 struct urb *urb, u32 token)
 158 {
 159
 160         /* If an async split transaction gets an error or is unlinked,
 161          * the TT buffer may be left in an indeterminate state.  We
 162          * have to clear the TT buffer.
 163          *
 164          * Note: this routine is never called for Isochronous transfers.
 165          */
 166         if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
 167 #ifdef CONFIG_DYNAMIC_DEBUG
 168                 struct usb_device *tt = urb->dev->tt->hub;
 169                 dev_dbg(&tt->dev,
 170                         "clear tt buffer port %d, a%d ep%d t%08x\n",
 171                         urb->dev->ttport, urb->dev->devnum,
 172                         usb_pipeendpoint(urb->pipe), token);
 173 #endif /* CONFIG_DYNAMIC_DEBUG */
 174                 if (!ehci_is_TDI(ehci)
 175                                 || urb->dev->tt->hub !=
 176                                    ehci_to_hcd(ehci)->self.root_hub) {
 177                         if (usb_hub_clear_tt_buffer(urb) == 0)
 178                                 qh->clearing_tt = 1;
 179                 } else {
 180
 181                         /* REVISIT ARC-derived cores don't clear the root
 182                          * hub TT buffer in this way...
 183                          */
 184                 }
 185         }
 186 }
 187
 188 static int qtd_copy_status (
 189         struct ehci_hcd *ehci,
 190         struct urb *urb,
 191         size_t length,
 192         u32 token
 193 )
 194 {
 195         int     status = -EINPROGRESS;
 196
 197         /* count IN/OUT bytes, not SETUP (even short packets) */
 198         if (likely(QTD_PID(token) != PID_CODE_SETUP))
 199                 urb->actual_length += length - QTD_LENGTH (token);
 200
 201         /* don't modify error codes */
 202         if (unlikely(urb->unlinked))
 203                 return status;
 204
 205         /* force cleanup after short read; not always an error */
 206         if (unlikely (IS_SHORT_READ (token)))
 207                 status = -EREMOTEIO;
 208
 209         /* serious "can't proceed" faults reported by the hardware */
 210         if (token & QTD_STS_HALT) {
 211                 if (token & QTD_STS_BABBLE) {
 212                         /* FIXME "must" disable babbling device's port too */
 213                         status = -EOVERFLOW;
 214                 /*
 215                  * When MMF is active and PID Code is IN, queue is halted.
 216                  * EHCI Specification, Table 4-13.
 217                  */
 218                 } else if ((token & QTD_STS_MMF) &&
 219                                         (QTD_PID(token) == PID_CODE_IN)) {
 220                         status = -EPROTO;
 221                 /* CERR nonzero + halt --> stall */
 222                 } else if (QTD_CERR(token)) {
 223                         status = -EPIPE;
 224
 225                 /* In theory, more than one of the following bits can be set
 226                  * since they are sticky and the transaction is retried.
 227                  * Which to test first is rather arbitrary.
 228                  */
 229                 } else if (token & QTD_STS_MMF) {
 230                         /* fs/ls interrupt xfer missed the complete-split */
 231                         status = -EPROTO;
 232                 } else if (token & QTD_STS_DBE) {
 233                         status = (QTD_PID (token) == 1) /* IN ? */
 234                                 ? -ENOSR  /* hc couldn't read data */
 235                                 : -ECOMM; /* hc couldn't write data */
 236                 } else if (token & QTD_STS_XACT) {
 237                         /* timeout, bad CRC, wrong PID, etc */
 238                         ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
 239                                 urb->dev->devpath,
 240                                 usb_pipeendpoint(urb->pipe),
 241                                 usb_pipein(urb->pipe) ? "in" : "out");
 242                         status = -EPROTO;
 243                 } else {        /* unknown */
 244                         status = -EPROTO;
 245                 }
 246         }
 247
 248         return status;
 249 }
 250
 251 static void
 252 ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
 253 {
 254         if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
 255                 /* ... update hc-wide periodic stats */
 256                 ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
 257         }
 258
 259         if (unlikely(urb->unlinked)) {
 260                 INCR(ehci->stats.unlink);
 261         } else {
 262                 /* report non-error and short read status as zero */
 263                 if (status == -EINPROGRESS || status == -EREMOTEIO)
 264                         status = 0;
 265                 INCR(ehci->stats.complete);
 266         }
 267
 268 #ifdef EHCI_URB_TRACE
 269         ehci_dbg (ehci,
 270                 "%s %s urb %p ep%d%s status %d len %d/%d\n",
 271                 __func__, urb->dev->devpath, urb,
 272                 usb_pipeendpoint (urb->pipe),
 273                 usb_pipein (urb->pipe) ? "in" : "out",
 274                 status,
 275                 urb->actual_length, urb->transfer_buffer_length);
 276 #endif
 277
 278         usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
 279         usb_hcd_giveback_urb(ehci_to_hcd(ehci), urb, status);
 280 }
 281
 282 static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh);
 283
 284 /*
 285  * Process and free completed qtds for a qh, returning URBs to drivers.
 286  * Chases up to qh->hw_current.  Returns nonzero if the caller should
 287  * unlink qh.
 288  */
 289 static unsigned
 290 qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 291 {
 292         struct ehci_qtd         *last, *end = qh->dummy;
 293         struct list_head        *entry, *tmp;
 294         int                     last_status;
 295         int                     stopped;
 296         u8                      state;
 297         struct ehci_qh_hw       *hw = qh->hw;
 298
 299         /* completions (or tasks on other cpus) must never clobber HALT
 300          * till we've gone through and cleaned everything up, even when
 301          * they add urbs to this qh's queue or mark them for unlinking.
 302          *
 303          * NOTE:  unlinking expects to be done in queue order.
 304          *
 305          * It's a bug for qh->qh_state to be anything other than
 306          * QH_STATE_IDLE, unless our caller is scan_async() or
 307          * scan_intr().
 308          */
 309         state = qh->qh_state;
 310         qh->qh_state = QH_STATE_COMPLETING;
 311         stopped = (state == QH_STATE_IDLE);
 312
 313  rescan:
 314         last = NULL;
 315         last_status = -EINPROGRESS;
 316         qh->dequeue_during_giveback = 0;
 317
 318         /* remove de-activated QTDs from front of queue.
 319          * after faults (including short reads), cleanup this urb
 320          * then let the queue advance.
 321          * if queue is stopped, handles unlinks.
 322          */
 323         list_for_each_safe (entry, tmp, &qh->qtd_list) {
 324                 struct ehci_qtd *qtd;
 325                 struct urb      *urb;
 326                 u32             token = 0;
 327
 328                 qtd = list_entry (entry, struct ehci_qtd, qtd_list);
 329                 urb = qtd->urb;
 330
 331                 /* clean up any state from previous QTD ...*/
 332                 if (last) {
 333                         if (likely (last->urb != urb)) {
 334                                 ehci_urb_done(ehci, last->urb, last_status);
 335                                 last_status = -EINPROGRESS;
 336                         }
 337                         ehci_qtd_free (ehci, last);
 338                         last = NULL;
 339                 }
 340
 341                 /* ignore urbs submitted during completions we reported */
 342                 if (qtd == end)
 343                         break;
 344
 345                 /* hardware copies qtd out of qh overlay */
 346                 rmb ();
 347                 token = hc32_to_cpu(ehci, qtd->hw_token);
 348
 349                 /* always clean up qtds the hc de-activated */
 350  retry_xacterr:
 351                 if ((token & QTD_STS_ACTIVE) == 0) {
 352
 353                         /* Report Data Buffer Error: non-fatal but useful */
 354                         if (token & QTD_STS_DBE)
 355                                 ehci_dbg(ehci,
 356                                         "detected DataBufferErr for urb %p ep%d%s len %d, qtd %p [qh %p]\n",
 357                                         urb,
 358                                         usb_endpoint_num(&urb->ep->desc),
 359                                         usb_endpoint_dir_in(&urb->ep->desc) ? "in" : "out",
 360                                         urb->transfer_buffer_length,
 361                                         qtd,
 362                                         qh);
 363
 364                         /* on STALL, error, and short reads this urb must
 365                          * complete and all its qtds must be recycled.
 366                          */
 367                         if ((token & QTD_STS_HALT) != 0) {
 368
 369                                 /* retry transaction errors until we
 370                                  * reach the software xacterr limit
 371                                  */
 372                                 if ((token & QTD_STS_XACT) &&
 373                                                 QTD_CERR(token) == 0 &&
 374                                                 ++qh->xacterrs < QH_XACTERR_MAX &&
 375                                                 !urb->unlinked) {
 376                                         ehci_dbg(ehci,
 377         "detected XactErr len %zu/%zu retry %d\n",
 378         qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs);
 379
 380                                         /* reset the token in the qtd and the
 381                                          * qh overlay (which still contains
 382                                          * the qtd) so that we pick up from
 383                                          * where we left off
 384                                          */
 385                                         token &= ~QTD_STS_HALT;
 386                                         token |= QTD_STS_ACTIVE |
 387                                                         (EHCI_TUNE_CERR << 10);
 388                                         qtd->hw_token = cpu_to_hc32(ehci,
 389                                                         token);
 390                                         wmb();
 391                                         hw->hw_token = cpu_to_hc32(ehci,
 392                                                         token);
 393                                         goto retry_xacterr;
 394                                 }
 395                                 stopped = 1;
 396                                 qh->unlink_reason |= QH_UNLINK_HALTED;
 397
 398                         /* magic dummy for some short reads; qh won't advance.
 399                          * that silicon quirk can kick in with this dummy too.
 400                          *
 401                          * other short reads won't stop the queue, including
 402                          * control transfers (status stage handles that) or
 403                          * most other single-qtd reads ... the queue stops if
 404                          * URB_SHORT_NOT_OK was set so the driver submitting
 405                          * the urbs could clean it up.
 406                          */
 407                         } else if (IS_SHORT_READ (token)
 408                                         && !(qtd->hw_alt_next
 409                                                 & EHCI_LIST_END(ehci))) {
 410                                 stopped = 1;
 411                                 qh->unlink_reason |= QH_UNLINK_SHORT_READ;
 412                         }
 413
 414                 /* stop scanning when we reach qtds the hc is using */
 415                 } else if (likely (!stopped
 416                                 && ehci->rh_state >= EHCI_RH_RUNNING)) {
 417                         break;
 418
 419                 /* scan the whole queue for unlinks whenever it stops */
 420                 } else {
 421                         stopped = 1;
 422
 423                         /* cancel everything if we halt, suspend, etc */
 424                         if (ehci->rh_state < EHCI_RH_RUNNING) {
 425                                 last_status = -ESHUTDOWN;
 426                                 qh->unlink_reason |= QH_UNLINK_SHUTDOWN;
 427                         }
 428
 429                         /* this qtd is active; skip it unless a previous qtd
 430                          * for its urb faulted, or its urb was canceled.
 431                          */
 432                         else if (last_status == -EINPROGRESS && !urb->unlinked)
 433                                 continue;
 434
 435                         /*
 436                          * If this was the active qtd when the qh was unlinked
 437                          * and the overlay's token is active, then the overlay
 438                          * hasn't been written back to the qtd yet so use its
 439                          * token instead of the qtd's.  After the qtd is
 440                          * processed and removed, the overlay won't be valid
 441                          * any more.
 442                          */
 443                         if (state == QH_STATE_IDLE &&
 444                                         qh->qtd_list.next == &qtd->qtd_list &&
 445                                         (hw->hw_token & ACTIVE_BIT(ehci))) {
 446                                 token = hc32_to_cpu(ehci, hw->hw_token);
 447                                 hw->hw_token &= ~ACTIVE_BIT(ehci);
 448                                 qh->should_be_inactive = 1;
 449
 450                                 /* An unlink may leave an incomplete
 451                                  * async transaction in the TT buffer.
 452                                  * We have to clear it.
 453                                  */
 454                                 ehci_clear_tt_buffer(ehci, qh, urb, token);
 455                         }
 456                 }
 457
 458                 /* unless we already know the urb's status, collect qtd status
 459                  * and update count of bytes transferred.  in common short read
 460                  * cases with only one data qtd (including control transfers),
 461                  * queue processing won't halt.  but with two or more qtds (for
 462                  * example, with a 32 KB transfer), when the first qtd gets a
 463                  * short read the second must be removed by hand.
 464                  */
 465                 if (last_status == -EINPROGRESS) {
 466                         last_status = qtd_copy_status(ehci, urb,
 467                                         qtd->length, token);
 468                         if (last_status == -EREMOTEIO
 469                                         && (qtd->hw_alt_next
 470                                                 & EHCI_LIST_END(ehci)))
 471                                 last_status = -EINPROGRESS;
 472
 473                         /* As part of low/full-speed endpoint-halt processing
 474                          * we must clear the TT buffer (11.17.5).
 475                          */
 476                         if (unlikely(last_status != -EINPROGRESS &&
 477                                         last_status != -EREMOTEIO)) {
 478                                 /* The TT's in some hubs malfunction when they
 479                                  * receive this request following a STALL (they
 480                                  * stop sending isochronous packets).  Since a
 481                                  * STALL can't leave the TT buffer in a busy
 482                                  * state (if you believe Figures 11-48 - 11-51
 483                                  * in the USB 2.0 spec), we won't clear the TT
 484                                  * buffer in this case.  Strictly speaking this
 485                                  * is a violation of the spec.
 486                                  */
 487                                 if (last_status != -EPIPE)
 488                                         ehci_clear_tt_buffer(ehci, qh, urb,
 489                                                         token);
 490                         }
 491                 }
 492
 493                 /* if we're removing something not at the queue head,
 494                  * patch the hardware queue pointer.
 495                  */
 496                 if (stopped && qtd->qtd_list.prev != &qh->qtd_list) {
 497                         last = list_entry (qtd->qtd_list.prev,
 498                                         struct ehci_qtd, qtd_list);
 499                         last->hw_next = qtd->hw_next;
 500                 }
 501
 502                 /* remove qtd; it's recycled after possible urb completion */
 503                 list_del (&qtd->qtd_list);
 504                 last = qtd;
 505
 506                 /* reinit the xacterr counter for the next qtd */
 507                 qh->xacterrs = 0;
 508         }
 509
 510         /* last urb's completion might still need calling */
 511         if (likely (last != NULL)) {
 512                 ehci_urb_done(ehci, last->urb, last_status);
 513                 ehci_qtd_free (ehci, last);
 514         }
 515
 516         /* Do we need to rescan for URBs dequeued during a giveback? */
 517         if (unlikely(qh->dequeue_during_giveback)) {
 518                 /* If the QH is already unlinked, do the rescan now. */
 519                 if (state == QH_STATE_IDLE)
 520                         goto rescan;
 521
 522                 /* Otherwise the caller must unlink the QH. */
 523         }
 524
 525         /* restore original state; caller must unlink or relink */
 526         qh->qh_state = state;
 527
 528         /* be sure the hardware's done with the qh before refreshing
 529          * it after fault cleanup, or recovering from silicon wrongly
 530          * overlaying the dummy qtd (which reduces DMA chatter).
 531          *
 532          * We won't refresh a QH that's linked (after the HC
 533          * stopped the queue).  That avoids a race:
 534          *  - HC reads first part of QH;
 535          *  - CPU updates that first part and the token;
 536          *  - HC reads rest of that QH, including token
 537          * Result:  HC gets an inconsistent image, and then
 538          * DMAs to/from the wrong memory (corrupting it).
 539          *
 540          * That should be rare for interrupt transfers,
 541          * except maybe high bandwidth ...
 542          */
 543         if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci))
 544                 qh->unlink_reason |= QH_UNLINK_DUMMY_OVERLAY;
 545
 546         /* Let the caller know if the QH needs to be unlinked. */
 547         return qh->unlink_reason;
 548 }
 549
 550 /*-------------------------------------------------------------------------*/
 551
 552 /*
 553  * reverse of qh_urb_transaction:  free a list of TDs.
 554  * used for cleanup after errors, before HC sees an URB's TDs.
 555  */
 556 static void qtd_list_free (
 557         struct ehci_hcd         *ehci,
 558         struct urb              *urb,
 559         struct list_head        *qtd_list
 560 ) {
 561         struct list_head        *entry, *temp;
 562
 563         list_for_each_safe (entry, temp, qtd_list) {
 564                 struct ehci_qtd *qtd;
 565
 566                 qtd = list_entry (entry, struct ehci_qtd, qtd_list);
 567                 list_del (&qtd->qtd_list);
 568                 ehci_qtd_free (ehci, qtd);
 569         }
 570 }
 571
 572 /*
 573  * create a list of filled qtds for this URB; won't link into qh.
 574  */
 575 static struct list_head *
 576 qh_urb_transaction (
 577         struct ehci_hcd         *ehci,
 578         struct urb              *urb,
 579         struct list_head        *head,
 580         gfp_t                   flags
 581 ) {
 582         struct ehci_qtd         *qtd, *qtd_prev;
 583         dma_addr_t              buf;
 584         int                     len, this_sg_len, maxpacket;
 585         int                     is_input;
 586         u32                     token;
 587         int                     i;
 588         struct scatterlist      *sg;
 589
 590         /*
 591          * URBs map to sequences of QTDs:  one logical transaction
 592          */
 593         qtd = ehci_qtd_alloc (ehci, flags);
 594         if (unlikely (!qtd))
 595                 return NULL;
 596         list_add_tail (&qtd->qtd_list, head);
 597         qtd->urb = urb;
 598
 599         token = QTD_STS_ACTIVE;
 600         token |= (EHCI_TUNE_CERR << 10);
 601         /* for split transactions, SplitXState initialized to zero */
 602
 603         len = urb->transfer_buffer_length;
 604         is_input = usb_pipein (urb->pipe);
 605         if (usb_pipecontrol (urb->pipe)) {
 606                 /* SETUP pid */
 607                 qtd_fill(ehci, qtd, urb->setup_dma,
 608                                 sizeof (struct usb_ctrlrequest),
 609                                 token | (2 /* "setup" */ << 8), 8);
 610
 611                 /* ... and always at least one more pid */
 612                 token ^= QTD_TOGGLE;
 613                 qtd_prev = qtd;
 614                 qtd = ehci_qtd_alloc (ehci, flags);
 615                 if (unlikely (!qtd))
 616                         goto cleanup;
 617                 qtd->urb = urb;
 618                 qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
 619                 list_add_tail (&qtd->qtd_list, head);
 620
 621                 /* for zero length DATA stages, STATUS is always IN */
 622                 if (len == 0)
 623                         token |= (1 /* "in" */ << 8);
 624         }
 625
 626         /*
 627          * data transfer stage:  buffer setup
 628          */
 629         i = urb->num_mapped_sgs;
 630         if (len > 0 && i > 0) {
 631                 sg = urb->sg;
 632                 buf = sg_dma_address(sg);
 633
 634                 /* urb->transfer_buffer_length may be smaller than the
 635                  * size of the scatterlist (or vice versa)
 636                  */
 637                 this_sg_len = min_t(int, sg_dma_len(sg), len);
 638         } else {
 639                 sg = NULL;
 640                 buf = urb->transfer_dma;
 641                 this_sg_len = len;
 642         }
 643
 644         if (is_input)
 645                 token |= (1 /* "in" */ << 8);
 646         /* else it's already initted to "out" pid (0 << 8) */
 647
 648         maxpacket = usb_endpoint_maxp(&urb->ep->desc);
 649
 650         /*
 651          * buffer gets wrapped in one or more qtds;
 652          * last one may be "short" (including zero len)
 653          * and may serve as a control status ack
 654          */
 655         for (;;) {
 656                 unsigned int this_qtd_len;
 657
 658                 this_qtd_len = qtd_fill(ehci, qtd, buf, this_sg_len, token,
 659                                 maxpacket);
 660                 this_sg_len -= this_qtd_len;
 661                 len -= this_qtd_len;
 662                 buf += this_qtd_len;
 663
 664                 /*
 665                  * short reads advance to a "magic" dummy instead of the next
 666                  * qtd ... that forces the queue to stop, for manual cleanup.
 667                  * (this will usually be overridden later.)
 668                  */
 669                 if (is_input)
 670                         qtd->hw_alt_next = ehci->async->hw->hw_alt_next;
 671
 672                 /* qh makes control packets use qtd toggle; maybe switch it */
 673                 if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
 674                         token ^= QTD_TOGGLE;
 675
 676                 if (likely(this_sg_len <= 0)) {
 677                         if (--i <= 0 || len <= 0)
 678                                 break;
 679                         sg = sg_next(sg);
 680                         buf = sg_dma_address(sg);
 681                         this_sg_len = min_t(int, sg_dma_len(sg), len);
 682                 }
 683
 684                 qtd_prev = qtd;
 685                 qtd = ehci_qtd_alloc (ehci, flags);
 686                 if (unlikely (!qtd))
 687                         goto cleanup;
 688                 qtd->urb = urb;
 689                 qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
 690                 list_add_tail (&qtd->qtd_list, head);
 691         }
 692
 693         /*
 694          * unless the caller requires manual cleanup after short reads,
 695          * have the alt_next mechanism keep the queue running after the
 696          * last data qtd (the only one, for control and most other cases).
 697          */
 698         if (likely ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0
 699                                 || usb_pipecontrol (urb->pipe)))
 700                 qtd->hw_alt_next = EHCI_LIST_END(ehci);
 701
 702         /*
 703          * control requests may need a terminating data "status" ack;
 704          * other OUT ones may need a terminating short packet
 705          * (zero length).
 706          */
 707         if (likely (urb->transfer_buffer_length != 0)) {
 708                 int     one_more = 0;
 709
 710                 if (usb_pipecontrol (urb->pipe)) {
 711                         one_more = 1;
 712                         token ^= 0x0100;        /* "in" <--> "out"  */
 713                         token |= QTD_TOGGLE;    /* force DATA1 */
 714                 } else if (usb_pipeout(urb->pipe)
 715                                 && (urb->transfer_flags & URB_ZERO_PACKET)
 716                                 && !(urb->transfer_buffer_length % maxpacket)) {
 717                         one_more = 1;
 718                 }
 719                 if (one_more) {
 720                         qtd_prev = qtd;
 721                         qtd = ehci_qtd_alloc (ehci, flags);
 722                         if (unlikely (!qtd))
 723                                 goto cleanup;
 724                         qtd->urb = urb;
 725                         qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
 726                         list_add_tail (&qtd->qtd_list, head);
 727
 728                         /* never any data in such packets */
 729                         qtd_fill(ehci, qtd, 0, 0, token, 0);
 730                 }
 731         }
 732
 733         /* by default, enable interrupt on urb completion */
 734         if (likely (!(urb->transfer_flags & URB_NO_INTERRUPT)))
 735                 qtd->hw_token |= cpu_to_hc32(ehci, QTD_IOC);
 736         return head;
 737
 738 cleanup:
 739         qtd_list_free (ehci, urb, head);
 740         return NULL;
 741 }
 742
 743 /*-------------------------------------------------------------------------*/
 744
 745 // Would be best to create all qh's from config descriptors,
 746 // when each interface/altsetting is established.  Unlink
 747 // any previous qh and cancel its urbs first; endpoints are
 748 // implicitly reset then (data toggle too).
 749 // That'd mean updating how usbcore talks to HCDs. (2.7?)
 750
 751
 752 /*
 753  * Each QH holds a qtd list; a QH is used for everything except iso.
 754  *
 755  * For interrupt urbs, the scheduler must set the microframe scheduling
 756  * mask(s) each time the QH gets scheduled.  For highspeed, that's
 757  * just one microframe in the s-mask.  For split interrupt transactions
 758  * there are additional complications: c-mask, maybe FSTNs.
 759  */
 760 static struct ehci_qh *
 761 qh_make (
 762         struct ehci_hcd         *ehci,
 763         struct urb              *urb,
 764         gfp_t                   flags
 765 ) {
 766         struct ehci_qh          *qh = ehci_qh_alloc (ehci, flags);
 767         struct usb_host_endpoint *ep;
 768         u32                     info1 = 0, info2 = 0;
 769         int                     is_input, type;
 770         int                     maxp = 0;
 771         int                     mult;
 772         struct usb_tt           *tt = urb->dev->tt;
 773         struct ehci_qh_hw       *hw;
 774
 775         if (!qh)
 776                 return qh;
 777
 778         /*
 779          * init endpoint/device data for this QH
 780          */
 781         info1 |= usb_pipeendpoint (urb->pipe) << 8;
 782         info1 |= usb_pipedevice (urb->pipe) << 0;
 783
 784         is_input = usb_pipein (urb->pipe);
 785         type = usb_pipetype (urb->pipe);
 786         ep = usb_pipe_endpoint (urb->dev, urb->pipe);
 787         maxp = usb_endpoint_maxp (&ep->desc);
 788         mult = usb_endpoint_maxp_mult (&ep->desc);
 789
 790         /* 1024 byte maxpacket is a hardware ceiling.  High bandwidth
 791          * acts like up to 3KB, but is built from smaller packets.
 792          */
 793         if (maxp > 1024) {
 794                 ehci_dbg(ehci, "bogus qh maxpacket %d\n", maxp);
 795                 goto done;
 796         }
 797
 798         /* Compute interrupt scheduling parameters just once, and save.
 799          * - allowing for high bandwidth, how many nsec/uframe are used?
 800          * - split transactions need a second CSPLIT uframe; same question
 801          * - splits also need a schedule gap (for full/low speed I/O)
 802          * - qh has a polling interval
 803          *
 804          * For control/bulk requests, the HC or TT handles these.
 805          */
 806         if (type == PIPE_INTERRUPT) {
 807                 unsigned        tmp;
 808
 809                 qh->ps.usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
 810                                 is_input, 0, mult * maxp));
 811                 qh->ps.phase = NO_FRAME;
 812
 813                 if (urb->dev->speed == USB_SPEED_HIGH) {
 814                         qh->ps.c_usecs = 0;
 815                         qh->gap_uf = 0;
 816
 817                         if (urb->interval > 1 && urb->interval < 8) {
 818                                 /* NOTE interval 2 or 4 uframes could work.
 819                                  * But interval 1 scheduling is simpler, and
 820                                  * includes high bandwidth.
 821                                  */
 822                                 urb->interval = 1;
 823                         } else if (urb->interval > ehci->periodic_size << 3) {
 824                                 urb->interval = ehci->periodic_size << 3;
 825                         }
 826                         qh->ps.period = urb->interval >> 3;
 827
 828                         /* period for bandwidth allocation */
 829                         tmp = min_t(unsigned, EHCI_BANDWIDTH_SIZE,
 830                                         1 << (urb->ep->desc.bInterval - 1));
 831
 832                         /* Allow urb->interval to override */
 833                         qh->ps.bw_uperiod = min_t(unsigned, tmp, urb->interval);
 834                         qh->ps.bw_period = qh->ps.bw_uperiod >> 3;
 835                 } else {
 836                         int             think_time;
 837
 838                         /* gap is f(FS/LS transfer times) */
 839                         qh->gap_uf = 1 + usb_calc_bus_time (urb->dev->speed,
 840                                         is_input, 0, maxp) / (125 * 1000);
 841
 842                         /* FIXME this just approximates SPLIT/CSPLIT times */
 843                         if (is_input) {         // SPLIT, gap, CSPLIT+DATA
 844                                 qh->ps.c_usecs = qh->ps.usecs + HS_USECS(0);
 845                                 qh->ps.usecs = HS_USECS(1);
 846                         } else {                // SPLIT+DATA, gap, CSPLIT
 847                                 qh->ps.usecs += HS_USECS(1);
 848                                 qh->ps.c_usecs = HS_USECS(0);
 849                         }
 850
 851                         think_time = tt ? tt->think_time : 0;
 852                         qh->ps.tt_usecs = NS_TO_US(think_time +
 853                                         usb_calc_bus_time (urb->dev->speed,
 854                                         is_input, 0, maxp));
 855                         if (urb->interval > ehci->periodic_size)
 856                                 urb->interval = ehci->periodic_size;
 857                         qh->ps.period = urb->interval;
 858
 859                         /* period for bandwidth allocation */
 860                         tmp = min_t(unsigned, EHCI_BANDWIDTH_FRAMES,
 861                                         urb->ep->desc.bInterval);
 862                         tmp = rounddown_pow_of_two(tmp);
 863
 864                         /* Allow urb->interval to override */
 865                         qh->ps.bw_period = min_t(unsigned, tmp, urb->interval);
 866                         qh->ps.bw_uperiod = qh->ps.bw_period << 3;
 867                 }
 868         }
 869
 870         /* support for tt scheduling, and access to toggles */
 871         qh->ps.udev = urb->dev;
 872         qh->ps.ep = urb->ep;
 873
 874         /* using TT? */
 875         switch (urb->dev->speed) {
 876         case USB_SPEED_LOW:
 877                 info1 |= QH_LOW_SPEED;
 878                 fallthrough;
 879
 880         case USB_SPEED_FULL:
 881                 /* EPS 0 means "full" */
 882                 if (type != PIPE_INTERRUPT)
 883                         info1 |= (EHCI_TUNE_RL_TT << 28);
 884                 if (type == PIPE_CONTROL) {
 885                         info1 |= QH_CONTROL_EP;         /* for TT */
 886                         info1 |= QH_TOGGLE_CTL;         /* toggle from qtd */
 887                 }
 888                 info1 |= maxp << 16;
 889
 890                 info2 |= (EHCI_TUNE_MULT_TT << 30);
 891
 892                 /* Some Freescale processors have an erratum in which the
 893                  * port number in the queue head was 0..N-1 instead of 1..N.
 894                  */
 895                 if (ehci_has_fsl_portno_bug(ehci))
 896                         info2 |= (urb->dev->ttport-1) << 23;
 897                 else
 898                         info2 |= urb->dev->ttport << 23;
 899
 900                 /* set the address of the TT; for TDI's integrated
 901                  * root hub tt, leave it zeroed.
 902                  */
 903                 if (tt && tt->hub != ehci_to_hcd(ehci)->self.root_hub)
 904                         info2 |= tt->hub->devnum << 16;
 905
 906                 /* NOTE:  if (PIPE_INTERRUPT) { scheduler sets c-mask } */
 907
 908                 break;
 909
 910         case USB_SPEED_HIGH:            /* no TT involved */
 911                 info1 |= QH_HIGH_SPEED;
 912                 if (type == PIPE_CONTROL) {
 913                         info1 |= (EHCI_TUNE_RL_HS << 28);
 914                         info1 |= 64 << 16;      /* usb2 fixed maxpacket */
 915                         info1 |= QH_TOGGLE_CTL; /* toggle from qtd */
 916                         info2 |= (EHCI_TUNE_MULT_HS << 30);
 917                 } else if (type == PIPE_BULK) {
 918                         info1 |= (EHCI_TUNE_RL_HS << 28);
 919                         /* The USB spec says that high speed bulk endpoints
 920                          * always use 512 byte maxpacket.  But some device
 921                          * vendors decided to ignore that, and MSFT is happy
 922                          * to help them do so.  So now people expect to use
 923                          * such nonconformant devices with Linux too; sigh.
 924                          */
 925                         info1 |= maxp << 16;
 926                         info2 |= (EHCI_TUNE_MULT_HS << 30);
 927                 } else {                /* PIPE_INTERRUPT */
 928                         info1 |= maxp << 16;
 929                         info2 |= mult << 30;
 930                 }
 931                 break;
 932         default:
 933                 ehci_dbg(ehci, "bogus dev %p speed %d\n", urb->dev,
 934                         urb->dev->speed);
 935 done:
 936                 qh_destroy(ehci, qh);
 937                 return NULL;
 938         }
 939
 940         /* NOTE:  if (PIPE_INTERRUPT) { scheduler sets s-mask } */
 941
 942         /* init as live, toggle clear */
 943         qh->qh_state = QH_STATE_IDLE;
 944         hw = qh->hw;
 945         hw->hw_info1 = cpu_to_hc32(ehci, info1);
 946         hw->hw_info2 = cpu_to_hc32(ehci, info2);
 947         qh->is_out = !is_input;
 948         usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
 949         return qh;
 950 }
 951
 952 /*-------------------------------------------------------------------------*/
 953
 954 static void enable_async(struct ehci_hcd *ehci)
 955 {
 956         if (ehci->async_count++)
 957                 return;
 958
 959         /* Stop waiting to turn off the async schedule */
 960         ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_DISABLE_ASYNC);
 961
 962         /* Don't start the schedule until ASS is 0 */
 963         ehci_poll_ASS(ehci);
 964         turn_on_io_watchdog(ehci);
 965 }
 966
 967 static void disable_async(struct ehci_hcd *ehci)
 968 {
 969         if (--ehci->async_count)
 970                 return;
 971
 972         /* The async schedule and unlink lists are supposed to be empty */
 973         WARN_ON(ehci->async->qh_next.qh || !list_empty(&ehci->async_unlink) ||
 974                         !list_empty(&ehci->async_idle));
 975
 976         /* Don't turn off the schedule until ASS is 1 */
 977         ehci_poll_ASS(ehci);
 978 }
 979
 980 /* move qh (and its qtds) onto async queue; maybe enable queue.  */
 981
 982 static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 983 {
 984         __hc32          dma = QH_NEXT(ehci, qh->qh_dma);
 985         struct ehci_qh  *head;
 986
 987         /* Don't link a QH if there's a Clear-TT-Buffer pending */
 988         if (unlikely(qh->clearing_tt))
 989                 return;
 990
 991         WARN_ON(qh->qh_state != QH_STATE_IDLE);
 992
 993         /* clear halt and/or toggle; and maybe recover from silicon quirk */
 994         qh_refresh(ehci, qh);
 995
 996         /* splice right after start */
 997         head = ehci->async;
 998         qh->qh_next = head->qh_next;
 999         qh->hw->hw_next = head->hw->hw_next;
1000         wmb ();
1001
1002         head->qh_next.qh = qh;
1003         head->hw->hw_next = dma;
1004
1005         qh->qh_state = QH_STATE_LINKED;
1006         qh->xacterrs = 0;
1007         qh->unlink_reason = 0;
1008         /* qtd completions reported later by interrupt */
1009
1010         enable_async(ehci);
1011 }
1012
1013 /*-------------------------------------------------------------------------*/
1014
1015 /*
1016  * For control/bulk/interrupt, return QH with these TDs appended.
1017  * Allocates and initializes the QH if necessary.
1018  * Returns null if it can't allocate a QH it needs to.
1019  * If the QH has TDs (urbs) already, that's great.
1020  */
1021 static struct ehci_qh *qh_append_tds (
1022         struct ehci_hcd         *ehci,
1023         struct urb              *urb,
1024         struct list_head        *qtd_list,
1025         int                     epnum,
1026         void                    **ptr
1027 )
1028 {
1029         struct ehci_qh          *qh = NULL;
1030         __hc32                  qh_addr_mask = cpu_to_hc32(ehci, 0x7f);
1031
1032         qh = (struct ehci_qh *) *ptr;
1033         if (unlikely (qh == NULL)) {
1034                 /* can't sleep here, we have ehci->lock... */
1035                 qh = qh_make (ehci, urb, GFP_ATOMIC);
1036                 *ptr = qh;
1037         }
1038         if (likely (qh != NULL)) {
1039                 struct ehci_qtd *qtd;
1040
1041                 if (unlikely (list_empty (qtd_list)))
1042                         qtd = NULL;
1043                 else
1044                         qtd = list_entry (qtd_list->next, struct ehci_qtd,
1045                                         qtd_list);
1046
1047                 /* control qh may need patching ... */
1048                 if (unlikely (epnum == 0)) {
1049
1050                         /* usb_reset_device() briefly reverts to address 0 */
1051                         if (usb_pipedevice (urb->pipe) == 0)
1052                                 qh->hw->hw_info1 &= ~qh_addr_mask;
1053                 }
1054
1055                 /* just one way to queue requests: swap with the dummy qtd.
1056                  * only hc or qh_refresh() ever modify the overlay.
1057                  */
1058                 if (likely (qtd != NULL)) {
1059                         struct ehci_qtd         *dummy;
1060                         dma_addr_t              dma;
1061                         __hc32                  token;
1062
1063                         /* to avoid racing the HC, use the dummy td instead of
1064                          * the first td of our list (becomes new dummy).  both
1065                          * tds stay deactivated until we're done, when the
1066                          * HC is allowed to fetch the old dummy (4.10.2).
1067                          */
1068                         token = qtd->hw_token;
1069                         qtd->hw_token = HALT_BIT(ehci);
1070
1071                         dummy = qh->dummy;
1072
1073                         dma = dummy->qtd_dma;
1074                         *dummy = *qtd;
1075                         dummy->qtd_dma = dma;
1076
1077                         list_del (&qtd->qtd_list);
1078                         list_add (&dummy->qtd_list, qtd_list);
1079                         list_splice_tail(qtd_list, &qh->qtd_list);
1080
1081                         ehci_qtd_init(ehci, qtd, qtd->qtd_dma);
1082                         qh->dummy = qtd;
1083
1084                         /* hc must see the new dummy at list end */
1085                         dma = qtd->qtd_dma;
1086                         qtd = list_entry (qh->qtd_list.prev,
1087                                         struct ehci_qtd, qtd_list);
1088                         qtd->hw_next = QTD_NEXT(ehci, dma);
1089
1090                         /* let the hc process these next qtds */
1091                         wmb ();
1092                         dummy->hw_token = token;
1093
1094                         urb->hcpriv = qh;
1095                 }
1096         }
1097         return qh;
1098 }
1099
1100 /*-------------------------------------------------------------------------*/
1101
1102 static int
1103 submit_async (
1104         struct ehci_hcd         *ehci,
1105         struct urb              *urb,
1106         struct list_head        *qtd_list,
1107         gfp_t                   mem_flags
1108 ) {
1109         int                     epnum;
1110         unsigned long           flags;
1111         struct ehci_qh          *qh = NULL;
1112         int                     rc;
1113
1114         epnum = urb->ep->desc.bEndpointAddress;
1115
1116 #ifdef EHCI_URB_TRACE
1117         {
1118                 struct ehci_qtd *qtd;
1119                 qtd = list_entry(qtd_list->next, struct ehci_qtd, qtd_list);
1120                 ehci_dbg(ehci,
1121                          "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
1122                          __func__, urb->dev->devpath, urb,
1123                          epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
1124                          urb->transfer_buffer_length,
1125                          qtd, urb->ep->hcpriv);
1126         }
1127 #endif
1128
1129         spin_lock_irqsave (&ehci->lock, flags);
1130         if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
1131                 rc = -ESHUTDOWN;
1132                 goto done;
1133         }
1134         rc = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
1135         if (unlikely(rc))
1136                 goto done;
1137
1138         qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv);
1139         if (unlikely(qh == NULL)) {
1140                 usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
1141                 rc = -ENOMEM;
1142                 goto done;
1143         }
1144
1145         /* Control/bulk operations through TTs don't need scheduling,
1146          * the HC and TT handle it when the TT has a buffer ready.
1147          */
1148         if (likely (qh->qh_state == QH_STATE_IDLE))
1149                 qh_link_async(ehci, qh);
1150  done:
1151         spin_unlock_irqrestore (&ehci->lock, flags);
1152         if (unlikely (qh == NULL))
1153                 qtd_list_free (ehci, urb, qtd_list);
1154         return rc;
1155 }
1156
1157 /*-------------------------------------------------------------------------*/
1158 #ifdef CONFIG_USB_HCD_TEST_MODE
1159 /*
1160  * This function creates the qtds and submits them for the
1161  * SINGLE_STEP_SET_FEATURE Test.
1162  * This is done in two parts: first SETUP req for GetDesc is sent then
1163  * 15 seconds later, the IN stage for GetDesc starts to req data from dev
1164  *
1165  * is_setup : i/p argument decides which of the two stage needs to be
1166  * performed; TRUE - SETUP and FALSE - IN+STATUS
1167  * Returns 0 if success
1168  */
1169 static int ehci_submit_single_step_set_feature(
1170         struct usb_hcd  *hcd,
1171         struct urb      *urb,
1172         int             is_setup
1173 ) {
1174         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
1175         struct list_head        qtd_list;
1176         struct list_head        *head;
1177
1178         struct ehci_qtd         *qtd, *qtd_prev;
1179         dma_addr_t              buf;
1180         int                     len, maxpacket;
1181         u32                     token;
1182
1183         INIT_LIST_HEAD(&qtd_list);
1184         head = &qtd_list;
1185
1186         /* URBs map to sequences of QTDs:  one logical transaction */
1187         qtd = ehci_qtd_alloc(ehci, GFP_KERNEL);
1188         if (unlikely(!qtd))
1189                 return -1;
1190         list_add_tail(&qtd->qtd_list, head);
1191         qtd->urb = urb;
1192
1193         token = QTD_STS_ACTIVE;
1194         token |= (EHCI_TUNE_CERR << 10);
1195
1196         len = urb->transfer_buffer_length;
1197         /*
1198          * Check if the request is to perform just the SETUP stage (getDesc)
1199          * as in SINGLE_STEP_SET_FEATURE test, DATA stage (IN) happens
1200          * 15 secs after the setup
1201          */
1202         if (is_setup) {
1203                 /* SETUP pid, and interrupt after SETUP completion */
1204                 qtd_fill(ehci, qtd, urb->setup_dma,
1205                                 sizeof(struct usb_ctrlrequest),
1206                                 QTD_IOC | token | (2 /* "setup" */ << 8), 8);
1207
1208                 submit_async(ehci, urb, &qtd_list, GFP_ATOMIC);
1209                 return 0; /*Return now; we shall come back after 15 seconds*/
1210         }
1211
1212         /*
1213          * IN: data transfer stage:  buffer setup : start the IN txn phase for
1214          * the get_Desc SETUP which was sent 15seconds back
1215          */
1216         token ^= QTD_TOGGLE;   /*We need to start IN with DATA-1 Pid-sequence*/
1217         buf = urb->transfer_dma;
1218
1219         token |= (1 /* "in" */ << 8);  /*This is IN stage*/
1220
1221         maxpacket = usb_endpoint_maxp(&urb->ep->desc);
1222
1223         qtd_fill(ehci, qtd, buf, len, token, maxpacket);
1224
1225         /*
1226          * Our IN phase shall always be a short read; so keep the queue running
1227          * and let it advance to the next qtd which zero length OUT status
1228          */
1229         qtd->hw_alt_next = EHCI_LIST_END(ehci);
1230
1231         /* STATUS stage for GetDesc control request */
1232         token ^= 0x0100;        /* "in" <--> "out"  */
1233         token |= QTD_TOGGLE;    /* force DATA1 */
1234
1235         qtd_prev = qtd;
1236         qtd = ehci_qtd_alloc(ehci, GFP_ATOMIC);
1237         if (unlikely(!qtd))
1238                 goto cleanup;
1239         qtd->urb = urb;
1240         qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
1241         list_add_tail(&qtd->qtd_list, head);
1242
1243         /* Interrupt after STATUS completion */
1244         qtd_fill(ehci, qtd, 0, 0, token | QTD_IOC, 0);
1245
1246         submit_async(ehci, urb, &qtd_list, GFP_KERNEL);
1247
1248         return 0;
1249
1250 cleanup:
1251         qtd_list_free(ehci, urb, head);
1252         return -1;
1253 }
1254 #endif /* CONFIG_USB_HCD_TEST_MODE */
1255
1256 /*-------------------------------------------------------------------------*/
1257
1258 static void single_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh)
1259 {
1260         struct ehci_qh          *prev;
1261
1262         /* Add to the end of the list of QHs waiting for the next IAAD */
1263         qh->qh_state = QH_STATE_UNLINK_WAIT;
1264         list_add_tail(&qh->unlink_node, &ehci->async_unlink);
1265
1266         /* Unlink it from the schedule */
1267         prev = ehci->async;
1268         while (prev->qh_next.qh != qh)
1269                 prev = prev->qh_next.qh;
1270
1271         prev->hw->hw_next = qh->hw->hw_next;
1272         prev->qh_next = qh->qh_next;
1273         if (ehci->qh_scan_next == qh)
1274                 ehci->qh_scan_next = qh->qh_next.qh;
1275 }
1276
1277 static void start_iaa_cycle(struct ehci_hcd *ehci)
1278 {
1279         /* If the controller isn't running, we don't have to wait for it */
1280         if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) {
1281                 end_unlink_async(ehci);
1282
1283         /* Otherwise start a new IAA cycle if one isn't already running */
1284         } else if (ehci->rh_state == EHCI_RH_RUNNING &&
1285                         !ehci->iaa_in_progress) {
1286
1287                 /* Make sure the unlinks are all visible to the hardware */
1288                 wmb();
1289
1290                 ehci_writel(ehci, ehci->command | CMD_IAAD,
1291                                 &ehci->regs->command);
1292                 ehci_readl(ehci, &ehci->regs->command);
1293                 ehci->iaa_in_progress = true;
1294                 ehci_enable_event(ehci, EHCI_HRTIMER_IAA_WATCHDOG, true);
1295         }
1296 }
1297
1298 static void end_iaa_cycle(struct ehci_hcd *ehci)
1299 {
1300         if (ehci->has_synopsys_hc_bug)
1301                 ehci_writel(ehci, (u32) ehci->async->qh_dma,
1302                             &ehci->regs->async_next);
1303
1304         /* The current IAA cycle has ended */
1305         ehci->iaa_in_progress = false;
1306
1307         end_unlink_async(ehci);
1308 }
1309
1310 /* See if the async qh for the qtds being unlinked are now gone from the HC */
1311
1312 static void end_unlink_async(struct ehci_hcd *ehci)
1313 {
1314         struct ehci_qh          *qh;
1315         bool                    early_exit;
1316
1317         if (list_empty(&ehci->async_unlink))
1318                 return;
1319         qh = list_first_entry(&ehci->async_unlink, struct ehci_qh,
1320                         unlink_node);   /* QH whose IAA cycle just ended */
1321
1322         /*
1323          * If async_unlinking is set then this routine is already running,
1324          * either on the stack or on another CPU.
1325          */
1326         early_exit = ehci->async_unlinking;
1327
1328         /* If the controller isn't running, process all the waiting QHs */
1329         if (ehci->rh_state < EHCI_RH_RUNNING)
1330                 list_splice_tail_init(&ehci->async_unlink, &ehci->async_idle);
1331
1332         /*
1333          * Intel (?) bug: The HC can write back the overlay region even
1334          * after the IAA interrupt occurs.  In self-defense, always go
1335          * through two IAA cycles for each QH.
1336          */
1337         else if (qh->qh_state == QH_STATE_UNLINK) {
1338                 /*
1339                  * Second IAA cycle has finished.  Process only the first
1340                  * waiting QH (NVIDIA (?) bug).
1341                  */
1342                 list_move_tail(&qh->unlink_node, &ehci->async_idle);
1343         }
1344
1345         /*
1346          * AMD/ATI (?) bug: The HC can continue to use an active QH long
1347          * after the IAA interrupt occurs.  To prevent problems, QHs that
1348          * may still be active will wait until 2 ms have passed with no
1349          * change to the hw_current and hw_token fields (this delay occurs
1350          * between the two IAA cycles).
1351          *
1352          * The EHCI spec (4.8.2) says that active QHs must not be removed
1353          * from the async schedule and recommends waiting until the QH
1354          * goes inactive.  This is ridiculous because the QH will _never_
1355          * become inactive if the endpoint NAKs indefinitely.
1356          */
1357
1358         /* Some reasons for unlinking guarantee the QH can't be active */
1359         else if (qh->unlink_reason & (QH_UNLINK_HALTED |
1360                         QH_UNLINK_SHORT_READ | QH_UNLINK_DUMMY_OVERLAY))
1361                 goto DelayDone;
1362
1363         /* The QH can't be active if the queue was and still is empty... */
1364         else if ((qh->unlink_reason & QH_UNLINK_QUEUE_EMPTY) &&
1365                         list_empty(&qh->qtd_list))
1366                 goto DelayDone;
1367
1368         /* ... or if the QH has halted */
1369         else if (qh->hw->hw_token & cpu_to_hc32(ehci, QTD_STS_HALT))
1370                 goto DelayDone;
1371
1372         /* Otherwise we have to wait until the QH stops changing */
1373         else {
1374                 __hc32          qh_current, qh_token;
1375
1376                 qh_current = qh->hw->hw_current;
1377                 qh_token = qh->hw->hw_token;
1378                 if (qh_current != ehci->old_current ||
1379                                 qh_token != ehci->old_token) {
1380                         ehci->old_current = qh_current;
1381                         ehci->old_token = qh_token;
1382                         ehci_enable_event(ehci,
1383                                         EHCI_HRTIMER_ACTIVE_UNLINK, true);
1384                         return;
1385                 }
1386  DelayDone:
1387                 qh->qh_state = QH_STATE_UNLINK;
1388                 early_exit = true;
1389         }
1390         ehci->old_current = ~0;         /* Prepare for next QH */
1391
1392         /* Start a new IAA cycle if any QHs are waiting for it */
1393         if (!list_empty(&ehci->async_unlink))
1394                 start_iaa_cycle(ehci);
1395
1396         /*
1397          * Don't allow nesting or concurrent calls,
1398          * or wait for the second IAA cycle for the next QH.
1399          */
1400         if (early_exit)
1401                 return;
1402
1403         /* Process the idle QHs */
1404         ehci->async_unlinking = true;
1405         while (!list_empty(&ehci->async_idle)) {
1406                 qh = list_first_entry(&ehci->async_idle, struct ehci_qh,
1407                                 unlink_node);
1408                 list_del(&qh->unlink_node);
1409
1410                 qh->qh_state = QH_STATE_IDLE;
1411                 qh->qh_next.qh = NULL;
1412
1413                 if (!list_empty(&qh->qtd_list))
1414                         qh_completions(ehci, qh);
1415                 if (!list_empty(&qh->qtd_list) &&
1416                                 ehci->rh_state == EHCI_RH_RUNNING)
1417                         qh_link_async(ehci, qh);
1418                 disable_async(ehci);
1419         }
1420         ehci->async_unlinking = false;
1421 }
1422
1423 static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
1424
1425 static void unlink_empty_async(struct ehci_hcd *ehci)
1426 {
1427         struct ehci_qh          *qh;
1428         struct ehci_qh          *qh_to_unlink = NULL;
1429         int                     count = 0;
1430
1431         /* Find the last async QH which has been empty for a timer cycle */
1432         for (qh = ehci->async->qh_next.qh; qh; qh = qh->qh_next.qh) {
1433                 if (list_empty(&qh->qtd_list) &&
1434                                 qh->qh_state == QH_STATE_LINKED) {
1435                         ++count;
1436                         if (qh->unlink_cycle != ehci->async_unlink_cycle)
1437                                 qh_to_unlink = qh;
1438                 }
1439         }
1440
1441         /* If nothing else is being unlinked, unlink the last empty QH */
1442         if (list_empty(&ehci->async_unlink) && qh_to_unlink) {
1443                 qh_to_unlink->unlink_reason |= QH_UNLINK_QUEUE_EMPTY;
1444                 start_unlink_async(ehci, qh_to_unlink);
1445                 --count;
1446         }
1447
1448         /* Other QHs will be handled later */
1449         if (count > 0) {
1450                 ehci_enable_event(ehci, EHCI_HRTIMER_ASYNC_UNLINKS, true);
1451                 ++ehci->async_unlink_cycle;
1452         }
1453 }
1454
1455 #ifdef  CONFIG_PM
1456
1457 /* The root hub is suspended; unlink all the async QHs */
1458 static void unlink_empty_async_suspended(struct ehci_hcd *ehci)
1459 {
1460         struct ehci_qh          *qh;
1461
1462         while (ehci->async->qh_next.qh) {
1463                 qh = ehci->async->qh_next.qh;
1464                 WARN_ON(!list_empty(&qh->qtd_list));
1465                 single_unlink_async(ehci, qh);
1466         }
1467 }
1468
1469 #endif
1470
1471 /* makes sure the async qh will become idle */
1472 /* caller must own ehci->lock */
1473
1474 static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh)
1475 {
1476         /* If the QH isn't linked then there's nothing we can do. */
1477         if (qh->qh_state != QH_STATE_LINKED)
1478                 return;
1479
1480         single_unlink_async(ehci, qh);
1481         start_iaa_cycle(ehci);
1482 }
1483
1484 /*-------------------------------------------------------------------------*/
1485
1486 static void scan_async (struct ehci_hcd *ehci)
1487 {
1488         struct ehci_qh          *qh;
1489         bool                    check_unlinks_later = false;
1490
1491         ehci->qh_scan_next = ehci->async->qh_next.qh;
1492         while (ehci->qh_scan_next) {
1493                 qh = ehci->qh_scan_next;
1494                 ehci->qh_scan_next = qh->qh_next.qh;
1495
1496                 /* clean any finished work for this qh */
1497                 if (!list_empty(&qh->qtd_list)) {
1498                         int temp;
1499
1500                         /*
1501                          * Unlinks could happen here; completion reporting
1502                          * drops the lock.  That's why ehci->qh_scan_next
1503                          * always holds the next qh to scan; if the next qh
1504                          * gets unlinked then ehci->qh_scan_next is adjusted
1505                          * in single_unlink_async().
1506                          */
1507                         temp = qh_completions(ehci, qh);
1508                         if (unlikely(temp)) {
1509                                 start_unlink_async(ehci, qh);
1510                         } else if (list_empty(&qh->qtd_list)
1511                                         && qh->qh_state == QH_STATE_LINKED) {
1512                                 qh->unlink_cycle = ehci->async_unlink_cycle;
1513                                 check_unlinks_later = true;
1514                         }
1515                 }
1516         }
1517
1518         /*
1519          * Unlink empty entries, reducing DMA usage as well
1520          * as HCD schedule-scanning costs.  Delay for any qh
1521          * we just scanned, there's a not-unusual case that it
1522          * doesn't stay idle for long.
1523          */
1524         if (check_unlinks_later && ehci->rh_state == EHCI_RH_RUNNING &&
1525                         !(ehci->enabled_hrtimer_events &
1526                                 BIT(EHCI_HRTIMER_ASYNC_UNLINKS))) {
1527                 ehci_enable_event(ehci, EHCI_HRTIMER_ASYNC_UNLINKS, true);
1528                 ++ehci->async_unlink_cycle;
1529         }
1530 }