drivers/usb/host/ehci-omap.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
   4  *
   5  * Bus Glue for the EHCI controllers in OMAP3/4
   6  * Tested on several OMAP3 boards, and OMAP4 Pandaboard
   7  *
   8  * Copyright (C) 2007-2013 Texas Instruments, Inc.
   9  *      Author: Vikram Pandita <vikram.pandita@ti.com>
  10  *      Author: Anand Gadiyar <gadiyar@ti.com>
  11  *      Author: Keshava Munegowda <keshava_mgowda@ti.com>
  12  *      Author: Roger Quadros <rogerq@ti.com>
  13  *
  14  * Copyright (C) 2009 Nokia Corporation
  15  *      Contact: Felipe Balbi <felipe.balbi@nokia.com>
  16  *
  17  * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
  18  */
  19
  20 #include <linux/kernel.h>
  21 #include <linux/module.h>
  22 #include <linux/io.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/slab.h>
  25 #include <linux/usb/ulpi.h>
  26 #include <linux/pm_runtime.h>
  27 #include <linux/clk.h>
  28 #include <linux/usb.h>
  29 #include <linux/usb/hcd.h>
  30 #include <linux/of.h>
  31 #include <linux/dma-mapping.h>
  32
  33 #include "ehci.h"
  34
  35 #include <linux/platform_data/usb-omap.h>
  36
  37 /* EHCI Register Set */
  38 #define EHCI_INSNREG04                                  (0xA0)
  39 #define EHCI_INSNREG04_DISABLE_UNSUSPEND                (1 << 5)
  40 #define EHCI_INSNREG05_ULPI                             (0xA4)
  41 #define EHCI_INSNREG05_ULPI_CONTROL_SHIFT               31
  42 #define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT               24
  43 #define EHCI_INSNREG05_ULPI_OPSEL_SHIFT                 22
  44 #define EHCI_INSNREG05_ULPI_REGADD_SHIFT                16
  45 #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT             8
  46 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT                0
  47
  48 #define DRIVER_DESC "OMAP-EHCI Host Controller driver"
  49
  50 static const char hcd_name[] = "ehci-omap";
  51
  52 /*-------------------------------------------------------------------------*/
  53
  54 struct omap_hcd {
  55         struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */
  56         int nports;
  57 };
  58
  59 static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
  60 {
  61         __raw_writel(val, base + reg);
  62 }
  63
  64 /* configure so an HC device and id are always provided */
  65 /* always called with process context; sleeping is OK */
  66
  67 static struct hc_driver __read_mostly ehci_omap_hc_driver;
  68
  69 static const struct ehci_driver_overrides ehci_omap_overrides __initconst = {
  70         .extra_priv_size = sizeof(struct omap_hcd),
  71 };
  72
  73 /**
  74  * ehci_hcd_omap_probe - initialize TI-based HCDs
  75  * @pdev: Pointer to this platform device's information
  76  *
  77  * Allocates basic resources for this USB host controller, and
  78  * then invokes the start() method for the HCD associated with it
  79  * through the hotplug entry's driver_data.
  80  */
  81 static int ehci_hcd_omap_probe(struct platform_device *pdev)
  82 {
  83         struct device *dev = &pdev->dev;
  84         struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
  85         struct resource *res;
  86         struct usb_hcd  *hcd;
  87         void __iomem *regs;
  88         int ret;
  89         int irq;
  90         int i;
  91         struct omap_hcd *omap;
  92
  93         if (usb_disabled())
  94                 return -ENODEV;
  95
  96         if (!dev->parent) {
  97                 dev_err(dev, "Missing parent device\n");
  98                 return -ENODEV;
  99         }
 100
 101         /* For DT boot, get platform data from parent. i.e. usbhshost */
 102         if (dev->of_node) {
 103                 pdata = dev_get_platdata(dev->parent);
 104                 dev->platform_data = pdata;
 105         }
 106
 107         if (!pdata) {
 108                 dev_err(dev, "Missing platform data\n");
 109                 return -ENODEV;
 110         }
 111
 112         irq = platform_get_irq(pdev, 0);
 113         if (irq < 0)
 114                 return irq;
 115
 116         regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 117         if (IS_ERR(regs))
 118                 return PTR_ERR(regs);
 119
 120         /*
 121          * Right now device-tree probed devices don't get dma_mask set.
 122          * Since shared usb code relies on it, set it here for now.
 123          * Once we have dma capability bindings this can go away.
 124          */
 125         ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
 126         if (ret)
 127                 return ret;
 128
 129         ret = -ENODEV;
 130         hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
 131                         dev_name(dev));
 132         if (!hcd) {
 133                 dev_err(dev, "Failed to create HCD\n");
 134                 return -ENOMEM;
 135         }
 136
 137         hcd->rsrc_start = res->start;
 138         hcd->rsrc_len = resource_size(res);
 139         hcd->regs = regs;
 140         hcd_to_ehci(hcd)->caps = regs;
 141
 142         omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
 143         omap->nports = pdata->nports;
 144
 145         platform_set_drvdata(pdev, hcd);
 146
 147         /* get the PHY devices if needed */
 148         for (i = 0 ; i < omap->nports ; i++) {
 149                 struct usb_phy *phy;
 150
 151                 /* get the PHY device */
 152                 phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
 153                 if (IS_ERR(phy)) {
 154                         ret = PTR_ERR(phy);
 155                         if (ret == -ENODEV) { /* no PHY */
 156                                 phy = NULL;
 157                                 continue;
 158                         }
 159
 160                         if (ret != -EPROBE_DEFER)
 161                                 dev_err(dev, "Can't get PHY for port %d: %d\n",
 162                                         i, ret);
 163                         goto err_phy;
 164                 }
 165
 166                 omap->phy[i] = phy;
 167
 168                 if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) {
 169                         usb_phy_init(omap->phy[i]);
 170                         /* bring PHY out of suspend */
 171                         usb_phy_set_suspend(omap->phy[i], 0);
 172                 }
 173         }
 174
 175         pm_runtime_enable(dev);
 176         pm_runtime_get_sync(dev);
 177
 178         /*
 179          * An undocumented "feature" in the OMAP3 EHCI controller,
 180          * causes suspended ports to be taken out of suspend when
 181          * the USBCMD.Run/Stop bit is cleared (for example when
 182          * we do ehci_bus_suspend).
 183          * This breaks suspend-resume if the root-hub is allowed
 184          * to suspend. Writing 1 to this undocumented register bit
 185          * disables this feature and restores normal behavior.
 186          */
 187         ehci_write(regs, EHCI_INSNREG04,
 188                                 EHCI_INSNREG04_DISABLE_UNSUSPEND);
 189
 190         ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 191         if (ret) {
 192                 dev_err(dev, "failed to add hcd with err %d\n", ret);
 193                 goto err_pm_runtime;
 194         }
 195         device_wakeup_enable(hcd->self.controller);
 196
 197         /*
 198          * Bring PHYs out of reset for non PHY modes.
 199          * Even though HSIC mode is a PHY-less mode, the reset
 200          * line exists between the chips and can be modelled
 201          * as a PHY device for reset control.
 202          */
 203         for (i = 0; i < omap->nports; i++) {
 204                 if (!omap->phy[i] ||
 205                      pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY)
 206                         continue;
 207
 208                 usb_phy_init(omap->phy[i]);
 209                 /* bring PHY out of suspend */
 210                 usb_phy_set_suspend(omap->phy[i], 0);
 211         }
 212
 213         return 0;
 214
 215 err_pm_runtime:
 216         pm_runtime_put_sync(dev);
 217         pm_runtime_disable(dev);
 218
 219 err_phy:
 220         for (i = 0; i < omap->nports; i++) {
 221                 if (omap->phy[i])
 222                         usb_phy_shutdown(omap->phy[i]);
 223         }
 224
 225         usb_put_hcd(hcd);
 226
 227         return ret;
 228 }
 229
 230
 231 /**
 232  * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
 233  * @pdev: USB Host Controller being removed
 234  *
 235  * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
 236  * the HCD's stop() method.  It is always called from a thread
 237  * context, normally "rmmod", "apmd", or something similar.
 238  */
 239 static void ehci_hcd_omap_remove(struct platform_device *pdev)
 240 {
 241         struct device *dev = &pdev->dev;
 242         struct usb_hcd *hcd = dev_get_drvdata(dev);
 243         struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
 244         int i;
 245
 246         usb_remove_hcd(hcd);
 247
 248         for (i = 0; i < omap->nports; i++) {
 249                 if (omap->phy[i])
 250                         usb_phy_shutdown(omap->phy[i]);
 251         }
 252
 253         usb_put_hcd(hcd);
 254         pm_runtime_put_sync(dev);
 255         pm_runtime_disable(dev);
 256 }
 257
 258 static const struct of_device_id omap_ehci_dt_ids[] = {
 259         { .compatible = "ti,ehci-omap" },
 260         { }
 261 };
 262
 263 MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids);
 264
 265 static struct platform_driver ehci_hcd_omap_driver = {
 266         .probe                  = ehci_hcd_omap_probe,
 267         .remove_new             = ehci_hcd_omap_remove,
 268         .shutdown               = usb_hcd_platform_shutdown,
 269         /*.suspend              = ehci_hcd_omap_suspend, */
 270         /*.resume               = ehci_hcd_omap_resume, */
 271         .driver = {
 272                 .name           = hcd_name,
 273                 .of_match_table = omap_ehci_dt_ids,
 274         }
 275 };
 276
 277 /*-------------------------------------------------------------------------*/
 278
 279 static int __init ehci_omap_init(void)
 280 {
 281         if (usb_disabled())
 282                 return -ENODEV;
 283
 284         ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
 285         return platform_driver_register(&ehci_hcd_omap_driver);
 286 }
 287 module_init(ehci_omap_init);
 288
 289 static void __exit ehci_omap_cleanup(void)
 290 {
 291         platform_driver_unregister(&ehci_hcd_omap_driver);
 292 }
 293 module_exit(ehci_omap_cleanup);
 294
 295 MODULE_ALIAS("platform:ehci-omap");
 296 MODULE_AUTHOR("Texas Instruments, Inc.");
 297 MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
 298 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
 299
 300 MODULE_DESCRIPTION(DRIVER_DESC);
 301 MODULE_LICENSE("GPL");