GNU Linux-libre 6.8.7-gnu
[releases.git] / drivers / usb / gadget / udc / net2280.h
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * NetChip 2280 high/full speed USB device controller.
4  * Unlike many such controllers, this one talks PCI.
5  */
6
7 /*
8  * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
9  * Copyright (C) 2003 David Brownell
10  * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
11  */
12
13 #include <linux/usb/net2280.h>
14 #include <linux/usb/usb338x.h>
15
16 /*-------------------------------------------------------------------------*/
17
18 #ifdef  __KERNEL__
19
20 /* indexed registers [11.10] are accessed indirectly
21  * caller must own the device lock.
22  */
23
24 static inline u32 get_idx_reg(struct net2280_regs __iomem *regs, u32 index)
25 {
26         writel(index, &regs->idxaddr);
27         /* NOTE:  synchs device/cpu memory views */
28         return readl(&regs->idxdata);
29 }
30
31 static inline void
32 set_idx_reg(struct net2280_regs __iomem *regs, u32 index, u32 value)
33 {
34         writel(index, &regs->idxaddr);
35         writel(value, &regs->idxdata);
36         /* posted, may not be visible yet */
37 }
38
39 #endif  /* __KERNEL__ */
40
41 #define PCI_VENDOR_ID_PLX_LEGACY 0x17cc
42
43 #define PLX_LEGACY              BIT(0)
44 #define PLX_2280                BIT(1)
45 #define PLX_SUPERSPEED          BIT(2)
46 #define PLX_PCIE                BIT(3)
47
48 #define REG_DIAG                0x0
49 #define     RETRY_COUNTER                                       16
50 #define     FORCE_PCI_SERR                                      11
51 #define     FORCE_PCI_INTERRUPT                                 10
52 #define     FORCE_USB_INTERRUPT                                 9
53 #define     FORCE_CPU_INTERRUPT                                 8
54 #define     ILLEGAL_BYTE_ENABLES                                5
55 #define     FAST_TIMES                                          4
56 #define     FORCE_RECEIVE_ERROR                                 2
57 #define     FORCE_TRANSMIT_CRC_ERROR                            0
58 #define REG_FRAME               0x02    /* from last sof */
59 #define REG_CHIPREV             0x03    /* in bcd */
60 #define REG_HS_NAK_RATE         0x0a    /* NAK per N uframes */
61
62 #define CHIPREV_1       0x0100
63 #define CHIPREV_1A      0x0110
64
65 /* DEFECT 7374 */
66 #define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS         200
67 #define DEFECT_7374_PROCESSOR_WAIT_TIME             10
68
69 /* ep0 max packet size */
70 #define EP0_SS_MAX_PACKET_SIZE  0x200
71 #define EP0_HS_MAX_PACKET_SIZE  0x40
72 #ifdef  __KERNEL__
73
74 /*-------------------------------------------------------------------------*/
75
76 /* [8.3] for scatter/gather i/o
77  * use struct net2280_dma_regs bitfields
78  */
79 struct net2280_dma {
80         __le32          dmacount;
81         __le32          dmaaddr;                /* the buffer */
82         __le32          dmadesc;                /* next dma descriptor */
83         __le32          _reserved;
84 } __aligned(16);
85
86 /*-------------------------------------------------------------------------*/
87
88 /* DRIVER DATA STRUCTURES and UTILITIES */
89
90 struct net2280_ep {
91         struct usb_ep                           ep;
92         struct net2280_ep_regs __iomem *cfg;
93         struct net2280_ep_regs                  __iomem *regs;
94         struct net2280_dma_regs                 __iomem *dma;
95         struct net2280_dma                      *dummy;
96         dma_addr_t                              td_dma; /* of dummy */
97         struct net2280                          *dev;
98         unsigned long                           irqs;
99
100         /* analogous to a host-side qh */
101         struct list_head                        queue;
102         const struct usb_endpoint_descriptor    *desc;
103         unsigned                                num : 8,
104                                                 fifo_size : 12,
105                                                 in_fifo_validate : 1,
106                                                 out_overflow : 1,
107                                                 stopped : 1,
108                                                 wedged : 1,
109                                                 is_in : 1,
110                                                 is_iso : 1,
111                                                 responded : 1;
112 };
113
114 static inline void allow_status(struct net2280_ep *ep)
115 {
116         /* ep0 only */
117         writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
118                 BIT(CLEAR_NAK_OUT_PACKETS) |
119                 BIT(CLEAR_NAK_OUT_PACKETS_MODE),
120                 &ep->regs->ep_rsp);
121         ep->stopped = 1;
122 }
123
124 static inline void allow_status_338x(struct net2280_ep *ep)
125 {
126         /*
127          * Control Status Phase Handshake was set by the chip when the setup
128          * packet arrived. While set, the chip automatically NAKs the host's
129          * Status Phase tokens.
130          */
131         writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), &ep->regs->ep_rsp);
132
133         ep->stopped = 1;
134
135         /* TD 9.9 Halt Endpoint test.  TD 9.22 set feature test. */
136         ep->responded = 0;
137 }
138
139 struct net2280_request {
140         struct usb_request              req;
141         struct net2280_dma              *td;
142         dma_addr_t                      td_dma;
143         struct list_head                queue;
144         unsigned                        mapped : 1,
145                                         valid : 1;
146 };
147
148 struct net2280 {
149         /* each pci device provides one gadget, several endpoints */
150         struct usb_gadget               gadget;
151         spinlock_t                      lock;
152         struct net2280_ep               ep[9];
153         struct usb_gadget_driver        *driver;
154         unsigned                        enabled : 1,
155                                         protocol_stall : 1,
156                                         softconnect : 1,
157                                         got_irq : 1,
158                                         region:1,
159                                         added:1,
160                                         u1_enable:1,
161                                         u2_enable:1,
162                                         ltm_enable:1,
163                                         wakeup_enable:1,
164                                         addressed_state:1,
165                                         async_callbacks:1,
166                                         bug7734_patched:1;
167         u16                             chiprev;
168         int enhanced_mode;
169         int n_ep;
170         kernel_ulong_t                  quirks;
171
172
173         /* pci state used to access those endpoints */
174         struct pci_dev                  *pdev;
175         struct net2280_regs             __iomem *regs;
176         struct net2280_usb_regs         __iomem *usb;
177         struct usb338x_usb_ext_regs     __iomem *usb_ext;
178         struct net2280_pci_regs         __iomem *pci;
179         struct net2280_dma_regs         __iomem *dma;
180         struct net2280_dep_regs         __iomem *dep;
181         struct net2280_ep_regs          __iomem *epregs;
182         struct usb338x_ll_regs          __iomem *llregs;
183         struct usb338x_pl_regs          __iomem *plregs;
184
185         struct dma_pool                 *requests;
186         /* statistics...*/
187 };
188
189 static inline void set_halt(struct net2280_ep *ep)
190 {
191         /* ep0 and bulk/intr endpoints */
192         writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
193                 /* set NAK_OUT for erratum 0114 */
194                 ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) |
195                 BIT(SET_ENDPOINT_HALT),
196                 &ep->regs->ep_rsp);
197 }
198
199 static inline void clear_halt(struct net2280_ep *ep)
200 {
201         /* ep0 and bulk/intr endpoints */
202         writel(BIT(CLEAR_ENDPOINT_HALT) |
203                 BIT(CLEAR_ENDPOINT_TOGGLE) |
204                     /*
205                      * unless the gadget driver left a short packet in the
206                      * fifo, this reverses the erratum 0114 workaround.
207                      */
208                 ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS),
209                 &ep->regs->ep_rsp);
210 }
211
212 /*
213  * FSM value for Defect 7374 (U1U2 Test) is managed in
214  * chip's SCRATCH register:
215  */
216 #define DEFECT7374_FSM_FIELD    28
217
218 /* Waiting for Control Read:
219  *  - A transition to this state indicates a fresh USB connection,
220  *    before the first Setup Packet. The connection speed is not
221  *    known. Firmware is waiting for the first Control Read.
222  *  - Starting state: This state can be thought of as the FSM's typical
223  *    starting state.
224  *  - Tip: Upon the first SS Control Read the FSM never
225  *    returns to this state.
226  */
227 #define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ BIT(DEFECT7374_FSM_FIELD)
228
229 /* Non-SS Control Read:
230  *  - A transition to this state indicates detection of the first HS
231  *    or FS Control Read.
232  *  - Tip: Upon the first SS Control Read the FSM never
233  *    returns to this state.
234  */
235 #define DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD)
236
237 /* SS Control Read:
238  *  - A transition to this state indicates detection of the
239  *    first SS Control Read.
240  *  - This state indicates workaround completion. Workarounds no longer
241  *    need to be applied (as long as the chip remains powered up).
242  *  - Tip: Once in this state the FSM state does not change (until
243  *    the chip's power is lost and restored).
244  *  - This can be thought of as the final state of the FSM;
245  *    the FSM 'locks-up' in this state until the chip loses power.
246  */
247 #define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD)
248
249 #ifdef USE_RDK_LEDS
250
251 static inline void net2280_led_init(struct net2280 *dev)
252 {
253         /* LED3 (green) is on during USB activity. note erratum 0113. */
254         writel(BIT(GPIO3_LED_SELECT) |
255                 BIT(GPIO3_OUTPUT_ENABLE) |
256                 BIT(GPIO2_OUTPUT_ENABLE) |
257                 BIT(GPIO1_OUTPUT_ENABLE) |
258                 BIT(GPIO0_OUTPUT_ENABLE),
259                 &dev->regs->gpioctl);
260 }
261
262 /* indicate speed with bi-color LED 0/1 */
263 static inline
264 void net2280_led_speed(struct net2280 *dev, enum usb_device_speed speed)
265 {
266         u32     val = readl(&dev->regs->gpioctl);
267         switch (speed) {
268         case USB_SPEED_SUPER:           /* green + red */
269                 val |= BIT(GPIO0_DATA) | BIT(GPIO1_DATA);
270                 break;
271         case USB_SPEED_HIGH:            /* green */
272                 val &= ~BIT(GPIO0_DATA);
273                 val |= BIT(GPIO1_DATA);
274                 break;
275         case USB_SPEED_FULL:            /* red */
276                 val &= ~BIT(GPIO1_DATA);
277                 val |= BIT(GPIO0_DATA);
278                 break;
279         default:                        /* (off/black) */
280                 val &= ~(BIT(GPIO1_DATA) | BIT(GPIO0_DATA));
281                 break;
282         }
283         writel(val, &dev->regs->gpioctl);
284 }
285
286 /* indicate power with LED 2 */
287 static inline void net2280_led_active(struct net2280 *dev, int is_active)
288 {
289         u32     val = readl(&dev->regs->gpioctl);
290
291         /* FIXME this LED never seems to turn on.*/
292         if (is_active)
293                 val |= GPIO2_DATA;
294         else
295                 val &= ~GPIO2_DATA;
296         writel(val, &dev->regs->gpioctl);
297 }
298
299 static inline void net2280_led_shutdown(struct net2280 *dev)
300 {
301         /* turn off all four GPIO*_DATA bits */
302         writel(readl(&dev->regs->gpioctl) & ~0x0f,
303                         &dev->regs->gpioctl);
304 }
305
306 #else
307
308 #define net2280_led_init(dev)           do { } while (0)
309 #define net2280_led_speed(dev, speed)   do { } while (0)
310 #define net2280_led_shutdown(dev)       do { } while (0)
311
312 #endif
313
314 /*-------------------------------------------------------------------------*/
315
316 #define ep_dbg(ndev, fmt, args...) \
317         dev_dbg((&((ndev)->pdev->dev)), fmt, ##args)
318
319 #define ep_vdbg(ndev, fmt, args...) \
320         dev_vdbg((&((ndev)->pdev->dev)), fmt, ##args)
321
322 #define ep_info(ndev, fmt, args...) \
323         dev_info((&((ndev)->pdev->dev)), fmt, ##args)
324
325 #define ep_warn(ndev, fmt, args...) \
326         dev_warn((&((ndev)->pdev->dev)), fmt, ##args)
327
328 #define ep_err(ndev, fmt, args...) \
329         dev_err((&((ndev)->pdev->dev)), fmt, ##args)
330
331 /*-------------------------------------------------------------------------*/
332
333 static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count)
334 {
335         if (ep->dev->pdev->vendor == 0x17cc)
336                 writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg);
337         else{
338                 u32 tmp = readl(&ep->cfg->ep_cfg) &
339                                         (~(0x07 << EP_FIFO_BYTE_COUNT));
340                 writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg);
341         }
342 }
343
344 static inline void start_out_naking(struct net2280_ep *ep)
345 {
346         /* NOTE:  hardware races lurk here, and PING protocol issues */
347         writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
348         /* synch with device */
349         readl(&ep->regs->ep_rsp);
350 }
351
352 static inline void stop_out_naking(struct net2280_ep *ep)
353 {
354         u32     tmp;
355
356         tmp = readl(&ep->regs->ep_stat);
357         if ((tmp & BIT(NAK_OUT_PACKETS)) != 0)
358                 writel(BIT(CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
359 }
360
361
362 static inline void set_max_speed(struct net2280_ep *ep, u32 max)
363 {
364         u32 reg;
365         static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80,
366                                           0x50, 0x20, 0x70, 0x40, 0x90 };
367
368         if (ep->dev->enhanced_mode) {
369                 reg = ep_enhanced[ep->num];
370                 switch (ep->dev->gadget.speed) {
371                 case USB_SPEED_SUPER:
372                         reg += 2;
373                         break;
374                 case USB_SPEED_FULL:
375                         reg += 1;
376                         break;
377                 case USB_SPEED_HIGH:
378                 default:
379                         break;
380                 }
381         } else {
382                 reg = (ep->num + 1) * 0x10;
383                 if (ep->dev->gadget.speed != USB_SPEED_HIGH)
384                         reg += 1;
385         }
386
387         set_idx_reg(ep->dev->regs, reg, max);
388 }
389
390 #endif  /* __KERNEL__ */