2 * inode.c -- user mode filesystem api for usb gadget controllers
4 * Copyright (C) 2003-2004 David Brownell
5 * Copyright (C) 2003 Agilent Technologies
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
14 /* #define VERBOSE_DEBUG */
16 #include <linux/init.h>
17 #include <linux/module.h>
19 #include <linux/pagemap.h>
20 #include <linux/uts.h>
21 #include <linux/wait.h>
22 #include <linux/compiler.h>
23 #include <linux/uaccess.h>
24 #include <linux/sched.h>
25 #include <linux/slab.h>
26 #include <linux/poll.h>
27 #include <linux/mmu_context.h>
28 #include <linux/aio.h>
29 #include <linux/uio.h>
30 #include <linux/refcount.h>
31 #include <linux/delay.h>
32 #include <linux/device.h>
33 #include <linux/moduleparam.h>
35 #include <linux/usb/gadgetfs.h>
36 #include <linux/usb/gadget.h>
40 * The gadgetfs API maps each endpoint to a file descriptor so that you
41 * can use standard synchronous read/write calls for I/O. There's some
42 * O_NONBLOCK and O_ASYNC/FASYNC style i/o support. Example usermode
43 * drivers show how this works in practice. You can also use AIO to
44 * eliminate I/O gaps between requests, to help when streaming data.
46 * Key parts that must be USB-specific are protocols defining how the
47 * read/write operations relate to the hardware state machines. There
48 * are two types of files. One type is for the device, implementing ep0.
49 * The other type is for each IN or OUT endpoint. In both cases, the
50 * user mode driver must configure the hardware before using it.
52 * - First, dev_config() is called when /dev/gadget/$CHIP is configured
53 * (by writing configuration and device descriptors). Afterwards it
54 * may serve as a source of device events, used to handle all control
55 * requests other than basic enumeration.
57 * - Then, after a SET_CONFIGURATION control request, ep_config() is
58 * called when each /dev/gadget/ep* file is configured (by writing
59 * endpoint descriptors). Afterwards these files are used to write()
60 * IN data or to read() OUT data. To halt the endpoint, a "wrong
61 * direction" request is issued (like reading an IN endpoint).
63 * Unlike "usbfs" the only ioctl()s are for things that are rare, and maybe
64 * not possible on all hardware. For example, precise fault handling with
65 * respect to data left in endpoint fifos after aborted operations; or
66 * selective clearing of endpoint halts, to implement SET_INTERFACE.
69 #define DRIVER_DESC "USB Gadget filesystem"
70 #define DRIVER_VERSION "24 Aug 2004"
72 static const char driver_desc [] = DRIVER_DESC;
73 static const char shortname [] = "gadgetfs";
75 MODULE_DESCRIPTION (DRIVER_DESC);
76 MODULE_AUTHOR ("David Brownell");
77 MODULE_LICENSE ("GPL");
79 static int ep_open(struct inode *, struct file *);
82 /*----------------------------------------------------------------------*/
84 #define GADGETFS_MAGIC 0xaee71ee7
86 /* /dev/gadget/$CHIP represents ep0 and the whole device */
88 /* DISABLED is the initial state. */
89 STATE_DEV_DISABLED = 0,
91 /* Only one open() of /dev/gadget/$CHIP; only one file tracks
92 * ep0/device i/o modes and binding to the controller. Driver
93 * must always write descriptors to initialize the device, then
94 * the device becomes UNCONNECTED until enumeration.
98 /* From then on, ep0 fd is in either of two basic modes:
99 * - (UN)CONNECTED: read usb_gadgetfs_event(s) from it
100 * - SETUP: read/write will transfer control data and succeed;
101 * or if "wrong direction", performs protocol stall
103 STATE_DEV_UNCONNECTED,
107 /* UNBOUND means the driver closed ep0, so the device won't be
108 * accessible again (DEV_DISABLED) until all fds are closed.
113 /* enough for the whole queue: most events invalidate others */
120 enum ep0_state state; /* P: lock */
121 struct usb_gadgetfs_event event [N_EVENT];
123 struct fasync_struct *fasync;
126 /* drivers reading ep0 MUST handle control requests (SETUP)
127 * reported that way; else the host will time out.
129 unsigned usermode_setup : 1,
135 gadget_registered : 1;
136 unsigned setup_wLength;
138 /* the rest is basically write-once */
139 struct usb_config_descriptor *config, *hs_config;
140 struct usb_device_descriptor *dev;
141 struct usb_request *req;
142 struct usb_gadget *gadget;
143 struct list_head epfiles;
145 wait_queue_head_t wait;
146 struct super_block *sb;
147 struct dentry *dentry;
149 /* except this scratch i/o buffer for ep0 */
153 static inline void get_dev (struct dev_data *data)
155 refcount_inc (&data->count);
158 static void put_dev (struct dev_data *data)
160 if (likely (!refcount_dec_and_test (&data->count)))
162 /* needs no more cleanup */
163 BUG_ON (waitqueue_active (&data->wait));
167 static struct dev_data *dev_new (void)
169 struct dev_data *dev;
171 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
174 dev->state = STATE_DEV_DISABLED;
175 refcount_set (&dev->count, 1);
176 spin_lock_init (&dev->lock);
177 INIT_LIST_HEAD (&dev->epfiles);
178 init_waitqueue_head (&dev->wait);
182 /*----------------------------------------------------------------------*/
184 /* other /dev/gadget/$ENDPOINT files represent endpoints */
186 STATE_EP_DISABLED = 0,
196 struct dev_data *dev;
197 /* must hold dev->lock before accessing ep or req */
199 struct usb_request *req;
202 struct usb_endpoint_descriptor desc, hs_desc;
203 struct list_head epfiles;
204 wait_queue_head_t wait;
205 struct dentry *dentry;
208 static inline void get_ep (struct ep_data *data)
210 refcount_inc (&data->count);
213 static void put_ep (struct ep_data *data)
215 if (likely (!refcount_dec_and_test (&data->count)))
218 /* needs no more cleanup */
219 BUG_ON (!list_empty (&data->epfiles));
220 BUG_ON (waitqueue_active (&data->wait));
224 /*----------------------------------------------------------------------*/
226 /* most "how to use the hardware" policy choices are in userspace:
227 * mapping endpoint roles (which the driver needs) to the capabilities
228 * which the usb controller has. most of those capabilities are exposed
229 * implicitly, starting with the driver name and then endpoint names.
232 static const char *CHIP;
234 /*----------------------------------------------------------------------*/
236 /* NOTE: don't use dev_printk calls before binding to the gadget
237 * at the end of ep0 configuration, or after unbind.
240 /* too wordy: dev_printk(level , &(d)->gadget->dev , fmt , ## args) */
241 #define xprintk(d,level,fmt,args...) \
242 printk(level "%s: " fmt , shortname , ## args)
245 #define DBG(dev,fmt,args...) \
246 xprintk(dev , KERN_DEBUG , fmt , ## args)
248 #define DBG(dev,fmt,args...) \
255 #define VDEBUG(dev,fmt,args...) \
259 #define ERROR(dev,fmt,args...) \
260 xprintk(dev , KERN_ERR , fmt , ## args)
261 #define INFO(dev,fmt,args...) \
262 xprintk(dev , KERN_INFO , fmt , ## args)
265 /*----------------------------------------------------------------------*/
267 /* SYNCHRONOUS ENDPOINT OPERATIONS (bulk/intr/iso)
269 * After opening, configure non-control endpoints. Then use normal
270 * stream read() and write() requests; and maybe ioctl() to get more
271 * precise FIFO status when recovering from cancellation.
274 static void epio_complete (struct usb_ep *ep, struct usb_request *req)
276 struct ep_data *epdata = ep->driver_data;
281 epdata->status = req->status;
283 epdata->status = req->actual;
284 complete ((struct completion *)req->context);
287 /* tasklock endpoint, returning when it's connected.
288 * still need dev->lock to use epdata->ep.
291 get_ready_ep (unsigned f_flags, struct ep_data *epdata, bool is_write)
295 if (f_flags & O_NONBLOCK) {
296 if (!mutex_trylock(&epdata->lock))
298 if (epdata->state != STATE_EP_ENABLED &&
299 (!is_write || epdata->state != STATE_EP_READY)) {
300 mutex_unlock(&epdata->lock);
308 val = mutex_lock_interruptible(&epdata->lock);
312 switch (epdata->state) {
313 case STATE_EP_ENABLED:
315 case STATE_EP_READY: /* not configured yet */
319 case STATE_EP_UNBOUND: /* clean disconnect */
321 // case STATE_EP_DISABLED: /* "can't happen" */
322 default: /* error! */
323 pr_debug ("%s: ep %p not available, state %d\n",
324 shortname, epdata, epdata->state);
326 mutex_unlock(&epdata->lock);
331 ep_io (struct ep_data *epdata, void *buf, unsigned len)
333 DECLARE_COMPLETION_ONSTACK (done);
336 spin_lock_irq (&epdata->dev->lock);
337 if (likely (epdata->ep != NULL)) {
338 struct usb_request *req = epdata->req;
340 req->context = &done;
341 req->complete = epio_complete;
344 value = usb_ep_queue (epdata->ep, req, GFP_ATOMIC);
347 spin_unlock_irq (&epdata->dev->lock);
349 if (likely (value == 0)) {
350 value = wait_event_interruptible (done.wait, done.done);
352 spin_lock_irq (&epdata->dev->lock);
353 if (likely (epdata->ep != NULL)) {
354 DBG (epdata->dev, "%s i/o interrupted\n",
356 usb_ep_dequeue (epdata->ep, epdata->req);
357 spin_unlock_irq (&epdata->dev->lock);
359 wait_event (done.wait, done.done);
360 if (epdata->status == -ECONNRESET)
361 epdata->status = -EINTR;
363 spin_unlock_irq (&epdata->dev->lock);
365 DBG (epdata->dev, "endpoint gone\n");
366 epdata->status = -ENODEV;
369 return epdata->status;
375 ep_release (struct inode *inode, struct file *fd)
377 struct ep_data *data = fd->private_data;
380 value = mutex_lock_interruptible(&data->lock);
384 /* clean up if this can be reopened */
385 if (data->state != STATE_EP_UNBOUND) {
386 data->state = STATE_EP_DISABLED;
387 data->desc.bDescriptorType = 0;
388 data->hs_desc.bDescriptorType = 0;
389 usb_ep_disable(data->ep);
391 mutex_unlock(&data->lock);
396 static long ep_ioctl(struct file *fd, unsigned code, unsigned long value)
398 struct ep_data *data = fd->private_data;
401 if ((status = get_ready_ep (fd->f_flags, data, false)) < 0)
404 spin_lock_irq (&data->dev->lock);
405 if (likely (data->ep != NULL)) {
407 case GADGETFS_FIFO_STATUS:
408 status = usb_ep_fifo_status (data->ep);
410 case GADGETFS_FIFO_FLUSH:
411 usb_ep_fifo_flush (data->ep);
413 case GADGETFS_CLEAR_HALT:
414 status = usb_ep_clear_halt (data->ep);
421 spin_unlock_irq (&data->dev->lock);
422 mutex_unlock(&data->lock);
426 /*----------------------------------------------------------------------*/
428 /* ASYNCHRONOUS ENDPOINT I/O OPERATIONS (bulk/intr/iso) */
431 struct usb_request *req;
432 struct ep_data *epdata;
434 struct mm_struct *mm;
435 struct work_struct work;
442 static int ep_aio_cancel(struct kiocb *iocb)
444 struct kiocb_priv *priv = iocb->private;
445 struct ep_data *epdata;
449 epdata = priv->epdata;
450 // spin_lock(&epdata->dev->lock);
451 if (likely(epdata && epdata->ep && priv->req))
452 value = usb_ep_dequeue (epdata->ep, priv->req);
455 // spin_unlock(&epdata->dev->lock);
461 static void ep_user_copy_worker(struct work_struct *work)
463 struct kiocb_priv *priv = container_of(work, struct kiocb_priv, work);
464 struct mm_struct *mm = priv->mm;
465 struct kiocb *iocb = priv->iocb;
469 ret = copy_to_iter(priv->buf, priv->actual, &priv->to);
474 /* completing the iocb can drop the ctx and mm, don't touch mm after */
475 iocb->ki_complete(iocb, ret, ret);
478 kfree(priv->to_free);
482 static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req)
484 struct kiocb *iocb = req->context;
485 struct kiocb_priv *priv = iocb->private;
486 struct ep_data *epdata = priv->epdata;
488 /* lock against disconnect (and ideally, cancel) */
489 spin_lock(&epdata->dev->lock);
493 /* if this was a write or a read returning no data then we
494 * don't need to copy anything to userspace, so we can
495 * complete the aio request immediately.
497 if (priv->to_free == NULL || unlikely(req->actual == 0)) {
499 kfree(priv->to_free);
501 iocb->private = NULL;
502 /* aio_complete() reports bytes-transferred _and_ faults */
504 iocb->ki_complete(iocb, req->actual ? req->actual : req->status,
507 /* ep_copy_to_user() won't report both; we hide some faults */
508 if (unlikely(0 != req->status))
509 DBG(epdata->dev, "%s fault %d len %d\n",
510 ep->name, req->status, req->actual);
512 priv->buf = req->buf;
513 priv->actual = req->actual;
514 INIT_WORK(&priv->work, ep_user_copy_worker);
515 schedule_work(&priv->work);
518 usb_ep_free_request(ep, req);
519 spin_unlock(&epdata->dev->lock);
523 static ssize_t ep_aio(struct kiocb *iocb,
524 struct kiocb_priv *priv,
525 struct ep_data *epdata,
529 struct usb_request *req;
532 iocb->private = priv;
535 kiocb_set_cancel_fn(iocb, ep_aio_cancel);
537 priv->epdata = epdata;
539 priv->mm = current->mm; /* mm teardown waits for iocbs in exit_aio() */
541 /* each kiocb is coupled to one usb_request, but we can't
542 * allocate or submit those if the host disconnected.
544 spin_lock_irq(&epdata->dev->lock);
546 if (unlikely(epdata->ep == NULL))
549 req = usb_ep_alloc_request(epdata->ep, GFP_ATOMIC);
557 req->complete = ep_aio_complete;
559 value = usb_ep_queue(epdata->ep, req, GFP_ATOMIC);
560 if (unlikely(0 != value)) {
561 usb_ep_free_request(epdata->ep, req);
564 spin_unlock_irq(&epdata->dev->lock);
568 spin_unlock_irq(&epdata->dev->lock);
569 kfree(priv->to_free);
576 ep_read_iter(struct kiocb *iocb, struct iov_iter *to)
578 struct file *file = iocb->ki_filp;
579 struct ep_data *epdata = file->private_data;
580 size_t len = iov_iter_count(to);
584 if ((value = get_ready_ep(file->f_flags, epdata, false)) < 0)
587 /* halt any endpoint by doing a "wrong direction" i/o call */
588 if (usb_endpoint_dir_in(&epdata->desc)) {
589 if (usb_endpoint_xfer_isoc(&epdata->desc) ||
590 !is_sync_kiocb(iocb)) {
591 mutex_unlock(&epdata->lock);
594 DBG (epdata->dev, "%s halt\n", epdata->name);
595 spin_lock_irq(&epdata->dev->lock);
596 if (likely(epdata->ep != NULL))
597 usb_ep_set_halt(epdata->ep);
598 spin_unlock_irq(&epdata->dev->lock);
599 mutex_unlock(&epdata->lock);
603 buf = kmalloc(len, GFP_KERNEL);
604 if (unlikely(!buf)) {
605 mutex_unlock(&epdata->lock);
608 if (is_sync_kiocb(iocb)) {
609 value = ep_io(epdata, buf, len);
610 if (value >= 0 && (copy_to_iter(buf, value, to) != value))
613 struct kiocb_priv *priv = kzalloc(sizeof *priv, GFP_KERNEL);
617 priv->to_free = dup_iter(&priv->to, to, GFP_KERNEL);
618 if (!priv->to_free) {
622 value = ep_aio(iocb, priv, epdata, buf, len);
623 if (value == -EIOCBQUEUED)
628 mutex_unlock(&epdata->lock);
632 static ssize_t ep_config(struct ep_data *, const char *, size_t);
635 ep_write_iter(struct kiocb *iocb, struct iov_iter *from)
637 struct file *file = iocb->ki_filp;
638 struct ep_data *epdata = file->private_data;
639 size_t len = iov_iter_count(from);
644 if ((value = get_ready_ep(file->f_flags, epdata, true)) < 0)
647 configured = epdata->state == STATE_EP_ENABLED;
649 /* halt any endpoint by doing a "wrong direction" i/o call */
650 if (configured && !usb_endpoint_dir_in(&epdata->desc)) {
651 if (usb_endpoint_xfer_isoc(&epdata->desc) ||
652 !is_sync_kiocb(iocb)) {
653 mutex_unlock(&epdata->lock);
656 DBG (epdata->dev, "%s halt\n", epdata->name);
657 spin_lock_irq(&epdata->dev->lock);
658 if (likely(epdata->ep != NULL))
659 usb_ep_set_halt(epdata->ep);
660 spin_unlock_irq(&epdata->dev->lock);
661 mutex_unlock(&epdata->lock);
665 buf = kmalloc(len, GFP_KERNEL);
666 if (unlikely(!buf)) {
667 mutex_unlock(&epdata->lock);
671 if (unlikely(!copy_from_iter_full(buf, len, from))) {
676 if (unlikely(!configured)) {
677 value = ep_config(epdata, buf, len);
678 } else if (is_sync_kiocb(iocb)) {
679 value = ep_io(epdata, buf, len);
681 struct kiocb_priv *priv = kzalloc(sizeof *priv, GFP_KERNEL);
684 value = ep_aio(iocb, priv, epdata, buf, len);
685 if (value == -EIOCBQUEUED)
691 mutex_unlock(&epdata->lock);
695 /*----------------------------------------------------------------------*/
697 /* used after endpoint configuration */
698 static const struct file_operations ep_io_operations = {
699 .owner = THIS_MODULE,
702 .release = ep_release,
704 .unlocked_ioctl = ep_ioctl,
705 .read_iter = ep_read_iter,
706 .write_iter = ep_write_iter,
709 /* ENDPOINT INITIALIZATION
711 * fd = open ("/dev/gadget/$ENDPOINT", O_RDWR)
712 * status = write (fd, descriptors, sizeof descriptors)
714 * That write establishes the endpoint configuration, configuring
715 * the controller to process bulk, interrupt, or isochronous transfers
716 * at the right maxpacket size, and so on.
718 * The descriptors are message type 1, identified by a host order u32
719 * at the beginning of what's written. Descriptor order is: full/low
720 * speed descriptor, then optional high speed descriptor.
723 ep_config (struct ep_data *data, const char *buf, size_t len)
727 int value, length = len;
729 if (data->state != STATE_EP_READY) {
735 if (len < USB_DT_ENDPOINT_SIZE + 4)
738 /* we might need to change message format someday */
739 memcpy(&tag, buf, 4);
741 DBG(data->dev, "config %s, bad tag %d\n", data->name, tag);
747 /* NOTE: audio endpoint extensions not accepted here;
748 * just don't include the extra bytes.
751 /* full/low speed descriptor, then high speed */
752 memcpy(&data->desc, buf, USB_DT_ENDPOINT_SIZE);
753 if (data->desc.bLength != USB_DT_ENDPOINT_SIZE
754 || data->desc.bDescriptorType != USB_DT_ENDPOINT)
756 if (len != USB_DT_ENDPOINT_SIZE) {
757 if (len != 2 * USB_DT_ENDPOINT_SIZE)
759 memcpy(&data->hs_desc, buf + USB_DT_ENDPOINT_SIZE,
760 USB_DT_ENDPOINT_SIZE);
761 if (data->hs_desc.bLength != USB_DT_ENDPOINT_SIZE
762 || data->hs_desc.bDescriptorType
763 != USB_DT_ENDPOINT) {
764 DBG(data->dev, "config %s, bad hs length or type\n",
770 spin_lock_irq (&data->dev->lock);
771 if (data->dev->state == STATE_DEV_UNBOUND) {
781 switch (data->dev->gadget->speed) {
784 ep->desc = &data->desc;
787 /* fails if caller didn't provide that descriptor... */
788 ep->desc = &data->hs_desc;
791 DBG(data->dev, "unconnected, %s init abandoned\n",
796 value = usb_ep_enable(ep);
798 data->state = STATE_EP_ENABLED;
802 spin_unlock_irq (&data->dev->lock);
805 data->desc.bDescriptorType = 0;
806 data->hs_desc.bDescriptorType = 0;
815 ep_open (struct inode *inode, struct file *fd)
817 struct ep_data *data = inode->i_private;
820 if (mutex_lock_interruptible(&data->lock) != 0)
822 spin_lock_irq (&data->dev->lock);
823 if (data->dev->state == STATE_DEV_UNBOUND)
825 else if (data->state == STATE_EP_DISABLED) {
827 data->state = STATE_EP_READY;
829 fd->private_data = data;
830 VDEBUG (data->dev, "%s ready\n", data->name);
832 DBG (data->dev, "%s state %d\n",
833 data->name, data->state);
834 spin_unlock_irq (&data->dev->lock);
835 mutex_unlock(&data->lock);
839 /*----------------------------------------------------------------------*/
841 /* EP0 IMPLEMENTATION can be partly in userspace.
843 * Drivers that use this facility receive various events, including
844 * control requests the kernel doesn't handle. Drivers that don't
845 * use this facility may be too simple-minded for real applications.
848 static inline void ep0_readable (struct dev_data *dev)
850 wake_up (&dev->wait);
851 kill_fasync (&dev->fasync, SIGIO, POLL_IN);
854 static void clean_req (struct usb_ep *ep, struct usb_request *req)
856 struct dev_data *dev = ep->driver_data;
858 if (req->buf != dev->rbuf) {
860 req->buf = dev->rbuf;
862 req->complete = epio_complete;
863 dev->setup_out_ready = 0;
866 static void ep0_complete (struct usb_ep *ep, struct usb_request *req)
868 struct dev_data *dev = ep->driver_data;
872 /* for control OUT, data must still get to userspace */
873 spin_lock_irqsave(&dev->lock, flags);
874 if (!dev->setup_in) {
875 dev->setup_out_error = (req->status != 0);
876 if (!dev->setup_out_error)
878 dev->setup_out_ready = 1;
882 /* clean up as appropriate */
883 if (free && req->buf != &dev->rbuf)
885 req->complete = epio_complete;
886 spin_unlock_irqrestore(&dev->lock, flags);
889 static int setup_req (struct usb_ep *ep, struct usb_request *req, u16 len)
891 struct dev_data *dev = ep->driver_data;
893 if (dev->setup_out_ready) {
894 DBG (dev, "ep0 request busy!\n");
897 if (len > sizeof (dev->rbuf))
898 req->buf = kmalloc(len, GFP_ATOMIC);
899 if (req->buf == NULL) {
900 req->buf = dev->rbuf;
903 req->complete = ep0_complete;
910 ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
912 struct dev_data *dev = fd->private_data;
914 enum ep0_state state;
916 spin_lock_irq (&dev->lock);
917 if (dev->state <= STATE_DEV_OPENED) {
922 /* report fd mode change before acting on it */
923 if (dev->setup_abort) {
924 dev->setup_abort = 0;
929 /* control DATA stage */
930 if ((state = dev->state) == STATE_DEV_SETUP) {
932 if (dev->setup_in) { /* stall IN */
933 VDEBUG(dev, "ep0in stall\n");
934 (void) usb_ep_set_halt (dev->gadget->ep0);
936 dev->state = STATE_DEV_CONNECTED;
938 } else if (len == 0) { /* ack SET_CONFIGURATION etc */
939 struct usb_ep *ep = dev->gadget->ep0;
940 struct usb_request *req = dev->req;
942 if ((retval = setup_req (ep, req, 0)) == 0) {
944 spin_unlock_irq (&dev->lock);
945 retval = usb_ep_queue (ep, req, GFP_KERNEL);
946 spin_lock_irq (&dev->lock);
949 dev->state = STATE_DEV_CONNECTED;
951 /* assume that was SET_CONFIGURATION */
952 if (dev->current_config) {
955 if (gadget_is_dualspeed(dev->gadget)
956 && (dev->gadget->speed
958 power = dev->hs_config->bMaxPower;
960 power = dev->config->bMaxPower;
961 usb_gadget_vbus_draw(dev->gadget, 2 * power);
964 } else { /* collect OUT data */
965 if ((fd->f_flags & O_NONBLOCK) != 0
966 && !dev->setup_out_ready) {
970 spin_unlock_irq (&dev->lock);
971 retval = wait_event_interruptible (dev->wait,
972 dev->setup_out_ready != 0);
974 /* FIXME state could change from under us */
975 spin_lock_irq (&dev->lock);
979 if (dev->state != STATE_DEV_SETUP) {
983 dev->state = STATE_DEV_CONNECTED;
985 if (dev->setup_out_error)
988 len = min (len, (size_t)dev->req->actual);
990 spin_unlock_irq(&dev->lock);
991 if (copy_to_user (buf, dev->req->buf, len))
995 spin_lock_irq(&dev->lock);
997 clean_req (dev->gadget->ep0, dev->req);
998 /* NOTE userspace can't yet choose to stall */
1004 /* else normal: return event data */
1005 if (len < sizeof dev->event [0]) {
1009 len -= len % sizeof (struct usb_gadgetfs_event);
1010 dev->usermode_setup = 1;
1013 /* return queued events right away */
1014 if (dev->ev_next != 0) {
1017 n = len / sizeof (struct usb_gadgetfs_event);
1018 if (dev->ev_next < n)
1021 /* ep0 i/o has special semantics during STATE_DEV_SETUP */
1022 for (i = 0; i < n; i++) {
1023 if (dev->event [i].type == GADGETFS_SETUP) {
1024 dev->state = STATE_DEV_SETUP;
1029 spin_unlock_irq (&dev->lock);
1030 len = n * sizeof (struct usb_gadgetfs_event);
1031 if (copy_to_user (buf, &dev->event, len))
1036 /* NOTE this doesn't guard against broken drivers;
1037 * concurrent ep0 readers may lose events.
1039 spin_lock_irq (&dev->lock);
1040 if (dev->ev_next > n) {
1041 memmove(&dev->event[0], &dev->event[n],
1042 sizeof (struct usb_gadgetfs_event)
1043 * (dev->ev_next - n));
1046 spin_unlock_irq (&dev->lock);
1050 if (fd->f_flags & O_NONBLOCK) {
1057 DBG (dev, "fail %s, state %d\n", __func__, state);
1060 case STATE_DEV_UNCONNECTED:
1061 case STATE_DEV_CONNECTED:
1062 spin_unlock_irq (&dev->lock);
1063 DBG (dev, "%s wait\n", __func__);
1065 /* wait for events */
1066 retval = wait_event_interruptible (dev->wait,
1070 spin_lock_irq (&dev->lock);
1075 spin_unlock_irq (&dev->lock);
1079 static struct usb_gadgetfs_event *
1080 next_event (struct dev_data *dev, enum usb_gadgetfs_event_type type)
1082 struct usb_gadgetfs_event *event;
1086 /* these events purge the queue */
1087 case GADGETFS_DISCONNECT:
1088 if (dev->state == STATE_DEV_SETUP)
1089 dev->setup_abort = 1;
1091 case GADGETFS_CONNECT:
1094 case GADGETFS_SETUP: /* previous request timed out */
1095 case GADGETFS_SUSPEND: /* same effect */
1096 /* these events can't be repeated */
1097 for (i = 0; i != dev->ev_next; i++) {
1098 if (dev->event [i].type != type)
1100 DBG(dev, "discard old event[%d] %d\n", i, type);
1102 if (i == dev->ev_next)
1104 /* indices start at zero, for simplicity */
1105 memmove (&dev->event [i], &dev->event [i + 1],
1106 sizeof (struct usb_gadgetfs_event)
1107 * (dev->ev_next - i));
1113 VDEBUG(dev, "event[%d] = %d\n", dev->ev_next, type);
1114 event = &dev->event [dev->ev_next++];
1115 BUG_ON (dev->ev_next > N_EVENT);
1116 memset (event, 0, sizeof *event);
1122 ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
1124 struct dev_data *dev = fd->private_data;
1125 ssize_t retval = -ESRCH;
1127 /* report fd mode change before acting on it */
1128 if (dev->setup_abort) {
1129 dev->setup_abort = 0;
1132 /* data and/or status stage for control request */
1133 } else if (dev->state == STATE_DEV_SETUP) {
1135 len = min_t(size_t, len, dev->setup_wLength);
1136 if (dev->setup_in) {
1137 retval = setup_req (dev->gadget->ep0, dev->req, len);
1139 dev->state = STATE_DEV_CONNECTED;
1141 spin_unlock_irq (&dev->lock);
1142 if (copy_from_user (dev->req->buf, buf, len))
1145 if (len < dev->setup_wLength)
1147 retval = usb_ep_queue (
1148 dev->gadget->ep0, dev->req,
1151 spin_lock_irq(&dev->lock);
1154 clean_req (dev->gadget->ep0, dev->req);
1161 /* can stall some OUT transfers */
1162 } else if (dev->setup_can_stall) {
1163 VDEBUG(dev, "ep0out stall\n");
1164 (void) usb_ep_set_halt (dev->gadget->ep0);
1166 dev->state = STATE_DEV_CONNECTED;
1168 DBG(dev, "bogus ep0out stall!\n");
1171 DBG (dev, "fail %s, state %d\n", __func__, dev->state);
1177 ep0_fasync (int f, struct file *fd, int on)
1179 struct dev_data *dev = fd->private_data;
1180 // caller must F_SETOWN before signal delivery happens
1181 VDEBUG (dev, "%s %s\n", __func__, on ? "on" : "off");
1182 return fasync_helper (f, fd, on, &dev->fasync);
1185 static struct usb_gadget_driver gadgetfs_driver;
1188 dev_release (struct inode *inode, struct file *fd)
1190 struct dev_data *dev = fd->private_data;
1192 /* closing ep0 === shutdown all */
1194 if (dev->gadget_registered) {
1195 usb_gadget_unregister_driver (&gadgetfs_driver);
1196 dev->gadget_registered = false;
1199 /* at this point "good" hardware has disconnected the
1200 * device from USB; the host won't see it any more.
1201 * alternatively, all host requests will time out.
1207 /* other endpoints were all decoupled from this device */
1208 spin_lock_irq(&dev->lock);
1209 dev->state = STATE_DEV_DISABLED;
1210 spin_unlock_irq(&dev->lock);
1217 ep0_poll (struct file *fd, poll_table *wait)
1219 struct dev_data *dev = fd->private_data;
1222 if (dev->state <= STATE_DEV_OPENED)
1223 return DEFAULT_POLLMASK;
1225 poll_wait(fd, &dev->wait, wait);
1227 spin_lock_irq (&dev->lock);
1229 /* report fd mode change before acting on it */
1230 if (dev->setup_abort) {
1231 dev->setup_abort = 0;
1236 if (dev->state == STATE_DEV_SETUP) {
1237 if (dev->setup_in || dev->setup_can_stall)
1240 if (dev->ev_next != 0)
1244 spin_unlock_irq(&dev->lock);
1248 static long dev_ioctl (struct file *fd, unsigned code, unsigned long value)
1250 struct dev_data *dev = fd->private_data;
1251 struct usb_gadget *gadget = dev->gadget;
1254 spin_lock_irq(&dev->lock);
1255 if (dev->state == STATE_DEV_OPENED ||
1256 dev->state == STATE_DEV_UNBOUND) {
1257 /* Not bound to a UDC */
1258 } else if (gadget->ops->ioctl) {
1260 spin_unlock_irq(&dev->lock);
1262 ret = gadget->ops->ioctl (gadget, code, value);
1264 spin_lock_irq(&dev->lock);
1267 spin_unlock_irq(&dev->lock);
1272 /*----------------------------------------------------------------------*/
1274 /* The in-kernel gadget driver handles most ep0 issues, in particular
1275 * enumerating the single configuration (as provided from user space).
1277 * Unrecognized ep0 requests may be handled in user space.
1280 static void make_qualifier (struct dev_data *dev)
1282 struct usb_qualifier_descriptor qual;
1283 struct usb_device_descriptor *desc;
1285 qual.bLength = sizeof qual;
1286 qual.bDescriptorType = USB_DT_DEVICE_QUALIFIER;
1287 qual.bcdUSB = cpu_to_le16 (0x0200);
1290 qual.bDeviceClass = desc->bDeviceClass;
1291 qual.bDeviceSubClass = desc->bDeviceSubClass;
1292 qual.bDeviceProtocol = desc->bDeviceProtocol;
1294 /* assumes ep0 uses the same value for both speeds ... */
1295 qual.bMaxPacketSize0 = dev->gadget->ep0->maxpacket;
1297 qual.bNumConfigurations = 1;
1300 memcpy (dev->rbuf, &qual, sizeof qual);
1304 config_buf (struct dev_data *dev, u8 type, unsigned index)
1309 /* only one configuration */
1313 if (gadget_is_dualspeed(dev->gadget)) {
1314 hs = (dev->gadget->speed == USB_SPEED_HIGH);
1315 if (type == USB_DT_OTHER_SPEED_CONFIG)
1319 dev->req->buf = dev->hs_config;
1320 len = le16_to_cpu(dev->hs_config->wTotalLength);
1322 dev->req->buf = dev->config;
1323 len = le16_to_cpu(dev->config->wTotalLength);
1325 ((u8 *)dev->req->buf) [1] = type;
1330 gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
1332 struct dev_data *dev = get_gadget_data (gadget);
1333 struct usb_request *req = dev->req;
1334 int value = -EOPNOTSUPP;
1335 struct usb_gadgetfs_event *event;
1336 u16 w_value = le16_to_cpu(ctrl->wValue);
1337 u16 w_length = le16_to_cpu(ctrl->wLength);
1339 spin_lock (&dev->lock);
1340 dev->setup_abort = 0;
1341 if (dev->state == STATE_DEV_UNCONNECTED) {
1342 if (gadget_is_dualspeed(gadget)
1343 && gadget->speed == USB_SPEED_HIGH
1344 && dev->hs_config == NULL) {
1345 spin_unlock(&dev->lock);
1346 ERROR (dev, "no high speed config??\n");
1350 dev->state = STATE_DEV_CONNECTED;
1352 INFO (dev, "connected\n");
1353 event = next_event (dev, GADGETFS_CONNECT);
1354 event->u.speed = gadget->speed;
1357 /* host may have given up waiting for response. we can miss control
1358 * requests handled lower down (device/endpoint status and features);
1359 * then ep0_{read,write} will report the wrong status. controller
1360 * driver will have aborted pending i/o.
1362 } else if (dev->state == STATE_DEV_SETUP)
1363 dev->setup_abort = 1;
1365 req->buf = dev->rbuf;
1366 req->context = NULL;
1367 switch (ctrl->bRequest) {
1369 case USB_REQ_GET_DESCRIPTOR:
1370 if (ctrl->bRequestType != USB_DIR_IN)
1372 switch (w_value >> 8) {
1375 value = min (w_length, (u16) sizeof *dev->dev);
1376 dev->dev->bMaxPacketSize0 = dev->gadget->ep0->maxpacket;
1377 req->buf = dev->dev;
1379 case USB_DT_DEVICE_QUALIFIER:
1380 if (!dev->hs_config)
1382 value = min (w_length, (u16)
1383 sizeof (struct usb_qualifier_descriptor));
1384 make_qualifier (dev);
1386 case USB_DT_OTHER_SPEED_CONFIG:
1389 value = config_buf (dev,
1393 value = min (w_length, (u16) value);
1398 default: // all others are errors
1403 /* currently one config, two speeds */
1404 case USB_REQ_SET_CONFIGURATION:
1405 if (ctrl->bRequestType != 0)
1407 if (0 == (u8) w_value) {
1409 dev->current_config = 0;
1410 usb_gadget_vbus_draw(gadget, 8 /* mA */ );
1411 // user mode expected to disable endpoints
1415 if (gadget_is_dualspeed(gadget)
1416 && gadget->speed == USB_SPEED_HIGH) {
1417 config = dev->hs_config->bConfigurationValue;
1418 power = dev->hs_config->bMaxPower;
1420 config = dev->config->bConfigurationValue;
1421 power = dev->config->bMaxPower;
1424 if (config == (u8) w_value) {
1426 dev->current_config = config;
1427 usb_gadget_vbus_draw(gadget, 2 * power);
1431 /* report SET_CONFIGURATION like any other control request,
1432 * except that usermode may not stall this. the next
1433 * request mustn't be allowed start until this finishes:
1434 * endpoints and threads set up, etc.
1436 * NOTE: older PXA hardware (before PXA 255: without UDCCFR)
1437 * has bad/racey automagic that prevents synchronizing here.
1438 * even kernel mode drivers often miss them.
1441 INFO (dev, "configuration #%d\n", dev->current_config);
1442 usb_gadget_set_state(gadget, USB_STATE_CONFIGURED);
1443 if (dev->usermode_setup) {
1444 dev->setup_can_stall = 0;
1450 #ifndef CONFIG_USB_PXA25X
1451 /* PXA automagically handles this request too */
1452 case USB_REQ_GET_CONFIGURATION:
1453 if (ctrl->bRequestType != 0x80)
1455 *(u8 *)req->buf = dev->current_config;
1456 value = min (w_length, (u16) 1);
1462 VDEBUG (dev, "%s req%02x.%02x v%04x i%04x l%d\n",
1463 dev->usermode_setup ? "delegate" : "fail",
1464 ctrl->bRequestType, ctrl->bRequest,
1465 w_value, le16_to_cpu(ctrl->wIndex), w_length);
1467 /* if there's an ep0 reader, don't stall */
1468 if (dev->usermode_setup) {
1469 dev->setup_can_stall = 1;
1471 dev->setup_in = (ctrl->bRequestType & USB_DIR_IN)
1473 dev->setup_wLength = w_length;
1474 dev->setup_out_ready = 0;
1475 dev->setup_out_error = 0;
1478 /* read DATA stage for OUT right away */
1479 if (unlikely (!dev->setup_in && w_length)) {
1480 value = setup_req (gadget->ep0, dev->req,
1486 spin_unlock (&dev->lock);
1487 value = usb_ep_queue (gadget->ep0, dev->req,
1489 spin_lock (&dev->lock);
1492 clean_req (gadget->ep0, dev->req);
1496 /* we can't currently stall these */
1497 dev->setup_can_stall = 0;
1500 /* state changes when reader collects event */
1501 event = next_event (dev, GADGETFS_SETUP);
1502 event->u.setup = *ctrl;
1504 spin_unlock (&dev->lock);
1509 /* proceed with data transfer and status phases? */
1510 if (value >= 0 && dev->state != STATE_DEV_SETUP) {
1511 req->length = value;
1512 req->zero = value < w_length;
1515 spin_unlock (&dev->lock);
1516 value = usb_ep_queue (gadget->ep0, req, GFP_KERNEL);
1517 spin_lock(&dev->lock);
1519 spin_unlock(&dev->lock);
1521 DBG (dev, "ep_queue --> %d\n", value);
1527 /* device stalls when value < 0 */
1528 spin_unlock (&dev->lock);
1532 static void destroy_ep_files (struct dev_data *dev)
1534 DBG (dev, "%s %d\n", __func__, dev->state);
1536 /* dev->state must prevent interference */
1537 spin_lock_irq (&dev->lock);
1538 while (!list_empty(&dev->epfiles)) {
1540 struct inode *parent;
1541 struct dentry *dentry;
1543 /* break link to FS */
1544 ep = list_first_entry (&dev->epfiles, struct ep_data, epfiles);
1545 list_del_init (&ep->epfiles);
1546 spin_unlock_irq (&dev->lock);
1548 dentry = ep->dentry;
1550 parent = d_inode(dentry->d_parent);
1552 /* break link to controller */
1553 mutex_lock(&ep->lock);
1554 if (ep->state == STATE_EP_ENABLED)
1555 (void) usb_ep_disable (ep->ep);
1556 ep->state = STATE_EP_UNBOUND;
1557 usb_ep_free_request (ep->ep, ep->req);
1559 mutex_unlock(&ep->lock);
1561 wake_up (&ep->wait);
1564 /* break link to dcache */
1568 inode_unlock(parent);
1570 spin_lock_irq (&dev->lock);
1572 spin_unlock_irq (&dev->lock);
1576 static struct dentry *
1577 gadgetfs_create_file (struct super_block *sb, char const *name,
1578 void *data, const struct file_operations *fops);
1580 static int activate_ep_files (struct dev_data *dev)
1583 struct ep_data *data;
1585 gadget_for_each_ep (ep, dev->gadget) {
1587 data = kzalloc(sizeof(*data), GFP_KERNEL);
1590 data->state = STATE_EP_DISABLED;
1591 mutex_init(&data->lock);
1592 init_waitqueue_head (&data->wait);
1594 strncpy (data->name, ep->name, sizeof (data->name) - 1);
1595 refcount_set (&data->count, 1);
1600 ep->driver_data = data;
1602 data->req = usb_ep_alloc_request (ep, GFP_KERNEL);
1606 data->dentry = gadgetfs_create_file (dev->sb, data->name,
1607 data, &ep_io_operations);
1610 list_add_tail (&data->epfiles, &dev->epfiles);
1615 usb_ep_free_request (ep, data->req);
1620 DBG (dev, "%s enomem\n", __func__);
1621 destroy_ep_files (dev);
1626 gadgetfs_unbind (struct usb_gadget *gadget)
1628 struct dev_data *dev = get_gadget_data (gadget);
1630 DBG (dev, "%s\n", __func__);
1632 spin_lock_irq (&dev->lock);
1633 dev->state = STATE_DEV_UNBOUND;
1634 while (dev->udc_usage > 0) {
1635 spin_unlock_irq(&dev->lock);
1636 usleep_range(1000, 2000);
1637 spin_lock_irq(&dev->lock);
1639 spin_unlock_irq (&dev->lock);
1641 destroy_ep_files (dev);
1642 gadget->ep0->driver_data = NULL;
1643 set_gadget_data (gadget, NULL);
1645 /* we've already been disconnected ... no i/o is active */
1647 usb_ep_free_request (gadget->ep0, dev->req);
1648 DBG (dev, "%s done\n", __func__);
1652 static struct dev_data *the_device;
1654 static int gadgetfs_bind(struct usb_gadget *gadget,
1655 struct usb_gadget_driver *driver)
1657 struct dev_data *dev = the_device;
1661 if (0 != strcmp (CHIP, gadget->name)) {
1662 pr_err("%s expected %s controller not %s\n",
1663 shortname, CHIP, gadget->name);
1667 set_gadget_data (gadget, dev);
1668 dev->gadget = gadget;
1669 gadget->ep0->driver_data = dev;
1671 /* preallocate control response and buffer */
1672 dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
1675 dev->req->context = NULL;
1676 dev->req->complete = epio_complete;
1678 if (activate_ep_files (dev) < 0)
1681 INFO (dev, "bound to %s driver\n", gadget->name);
1682 spin_lock_irq(&dev->lock);
1683 dev->state = STATE_DEV_UNCONNECTED;
1684 spin_unlock_irq(&dev->lock);
1689 gadgetfs_unbind (gadget);
1694 gadgetfs_disconnect (struct usb_gadget *gadget)
1696 struct dev_data *dev = get_gadget_data (gadget);
1697 unsigned long flags;
1699 spin_lock_irqsave (&dev->lock, flags);
1700 if (dev->state == STATE_DEV_UNCONNECTED)
1702 dev->state = STATE_DEV_UNCONNECTED;
1704 INFO (dev, "disconnected\n");
1705 next_event (dev, GADGETFS_DISCONNECT);
1708 spin_unlock_irqrestore (&dev->lock, flags);
1712 gadgetfs_suspend (struct usb_gadget *gadget)
1714 struct dev_data *dev = get_gadget_data (gadget);
1715 unsigned long flags;
1717 INFO (dev, "suspended from state %d\n", dev->state);
1718 spin_lock_irqsave(&dev->lock, flags);
1719 switch (dev->state) {
1720 case STATE_DEV_SETUP: // VERY odd... host died??
1721 case STATE_DEV_CONNECTED:
1722 case STATE_DEV_UNCONNECTED:
1723 next_event (dev, GADGETFS_SUSPEND);
1729 spin_unlock_irqrestore(&dev->lock, flags);
1732 static struct usb_gadget_driver gadgetfs_driver = {
1733 .function = (char *) driver_desc,
1734 .bind = gadgetfs_bind,
1735 .unbind = gadgetfs_unbind,
1736 .setup = gadgetfs_setup,
1737 .reset = gadgetfs_disconnect,
1738 .disconnect = gadgetfs_disconnect,
1739 .suspend = gadgetfs_suspend,
1742 .name = (char *) shortname,
1746 /*----------------------------------------------------------------------*/
1747 /* DEVICE INITIALIZATION
1749 * fd = open ("/dev/gadget/$CHIP", O_RDWR)
1750 * status = write (fd, descriptors, sizeof descriptors)
1752 * That write establishes the device configuration, so the kernel can
1753 * bind to the controller ... guaranteeing it can handle enumeration
1754 * at all necessary speeds. Descriptor order is:
1756 * . message tag (u32, host order) ... for now, must be zero; it
1757 * would change to support features like multi-config devices
1758 * . full/low speed config ... all wTotalLength bytes (with interface,
1759 * class, altsetting, endpoint, and other descriptors)
1760 * . high speed config ... all descriptors, for high speed operation;
1761 * this one's optional except for high-speed hardware
1762 * . device descriptor
1764 * Endpoints are not yet enabled. Drivers must wait until device
1765 * configuration and interface altsetting changes create
1766 * the need to configure (or unconfigure) them.
1768 * After initialization, the device stays active for as long as that
1769 * $CHIP file is open. Events must then be read from that descriptor,
1770 * such as configuration notifications.
1773 static int is_valid_config(struct usb_config_descriptor *config,
1776 return config->bDescriptorType == USB_DT_CONFIG
1777 && config->bLength == USB_DT_CONFIG_SIZE
1778 && total >= USB_DT_CONFIG_SIZE
1779 && config->bConfigurationValue != 0
1780 && (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0
1781 && (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0;
1782 /* FIXME if gadget->is_otg, _must_ include an otg descriptor */
1783 /* FIXME check lengths: walk to end */
1787 dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
1789 struct dev_data *dev = fd->private_data;
1790 ssize_t value, length = len;
1795 spin_lock_irq(&dev->lock);
1796 if (dev->state > STATE_DEV_OPENED) {
1797 value = ep0_write(fd, buf, len, ptr);
1798 spin_unlock_irq(&dev->lock);
1801 spin_unlock_irq(&dev->lock);
1803 if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) ||
1804 (len > PAGE_SIZE * 4))
1807 /* we might need to change message format someday */
1808 if (copy_from_user (&tag, buf, 4))
1815 kbuf = memdup_user(buf, length);
1817 return PTR_ERR(kbuf);
1819 spin_lock_irq (&dev->lock);
1827 /* full or low speed config */
1828 dev->config = (void *) kbuf;
1829 total = le16_to_cpu(dev->config->wTotalLength);
1830 if (!is_valid_config(dev->config, total) ||
1831 total > length - USB_DT_DEVICE_SIZE)
1836 /* optional high speed config */
1837 if (kbuf [1] == USB_DT_CONFIG) {
1838 dev->hs_config = (void *) kbuf;
1839 total = le16_to_cpu(dev->hs_config->wTotalLength);
1840 if (!is_valid_config(dev->hs_config, total) ||
1841 total > length - USB_DT_DEVICE_SIZE)
1846 dev->hs_config = NULL;
1849 /* could support multiple configs, using another encoding! */
1851 /* device descriptor (tweaked for paranoia) */
1852 if (length != USB_DT_DEVICE_SIZE)
1854 dev->dev = (void *)kbuf;
1855 if (dev->dev->bLength != USB_DT_DEVICE_SIZE
1856 || dev->dev->bDescriptorType != USB_DT_DEVICE
1857 || dev->dev->bNumConfigurations != 1)
1859 dev->dev->bcdUSB = cpu_to_le16 (0x0200);
1861 /* triggers gadgetfs_bind(); then we can enumerate. */
1862 spin_unlock_irq (&dev->lock);
1864 gadgetfs_driver.max_speed = USB_SPEED_HIGH;
1866 gadgetfs_driver.max_speed = USB_SPEED_FULL;
1868 value = usb_gadget_probe_driver(&gadgetfs_driver);
1873 /* at this point "good" hardware has for the first time
1874 * let the USB the host see us. alternatively, if users
1875 * unplug/replug that will clear all the error state.
1877 * note: everything running before here was guaranteed
1878 * to choke driver model style diagnostics. from here
1879 * on, they can work ... except in cleanup paths that
1880 * kick in after the ep0 descriptor is closed.
1883 dev->gadget_registered = true;
1888 spin_unlock_irq (&dev->lock);
1889 pr_debug ("%s: %s fail %zd, %p\n", shortname, __func__, value, dev);
1896 dev_open (struct inode *inode, struct file *fd)
1898 struct dev_data *dev = inode->i_private;
1901 spin_lock_irq(&dev->lock);
1902 if (dev->state == STATE_DEV_DISABLED) {
1904 dev->state = STATE_DEV_OPENED;
1905 fd->private_data = dev;
1909 spin_unlock_irq(&dev->lock);
1913 static const struct file_operations ep0_operations = {
1914 .llseek = no_llseek,
1918 .write = dev_config,
1919 .fasync = ep0_fasync,
1921 .unlocked_ioctl = dev_ioctl,
1922 .release = dev_release,
1925 /*----------------------------------------------------------------------*/
1927 /* FILESYSTEM AND SUPERBLOCK OPERATIONS
1929 * Mounting the filesystem creates a controller file, used first for
1930 * device configuration then later for event monitoring.
1934 /* FIXME PAM etc could set this security policy without mount options
1935 * if epfiles inherited ownership and permissons from ep0 ...
1938 static unsigned default_uid;
1939 static unsigned default_gid;
1940 static unsigned default_perm = S_IRUSR | S_IWUSR;
1942 module_param (default_uid, uint, 0644);
1943 module_param (default_gid, uint, 0644);
1944 module_param (default_perm, uint, 0644);
1947 static struct inode *
1948 gadgetfs_make_inode (struct super_block *sb,
1949 void *data, const struct file_operations *fops,
1952 struct inode *inode = new_inode (sb);
1955 inode->i_ino = get_next_ino();
1956 inode->i_mode = mode;
1957 inode->i_uid = make_kuid(&init_user_ns, default_uid);
1958 inode->i_gid = make_kgid(&init_user_ns, default_gid);
1959 inode->i_atime = inode->i_mtime = inode->i_ctime
1960 = current_time(inode);
1961 inode->i_private = data;
1962 inode->i_fop = fops;
1967 /* creates in fs root directory, so non-renamable and non-linkable.
1968 * so inode and dentry are paired, until device reconfig.
1970 static struct dentry *
1971 gadgetfs_create_file (struct super_block *sb, char const *name,
1972 void *data, const struct file_operations *fops)
1974 struct dentry *dentry;
1975 struct inode *inode;
1977 dentry = d_alloc_name(sb->s_root, name);
1981 inode = gadgetfs_make_inode (sb, data, fops,
1982 S_IFREG | (default_perm & S_IRWXUGO));
1987 d_add (dentry, inode);
1991 static const struct super_operations gadget_fs_operations = {
1992 .statfs = simple_statfs,
1993 .drop_inode = generic_delete_inode,
1997 gadgetfs_fill_super (struct super_block *sb, void *opts, int silent)
1999 struct inode *inode;
2000 struct dev_data *dev;
2005 CHIP = usb_get_gadget_udc_name();
2010 sb->s_blocksize = PAGE_SIZE;
2011 sb->s_blocksize_bits = PAGE_SHIFT;
2012 sb->s_magic = GADGETFS_MAGIC;
2013 sb->s_op = &gadget_fs_operations;
2014 sb->s_time_gran = 1;
2017 inode = gadgetfs_make_inode (sb,
2018 NULL, &simple_dir_operations,
2019 S_IFDIR | S_IRUGO | S_IXUGO);
2022 inode->i_op = &simple_dir_inode_operations;
2023 if (!(sb->s_root = d_make_root (inode)))
2026 /* the ep0 file is named after the controller we expect;
2027 * user mode code can use it for sanity checks, like we do.
2034 dev->dentry = gadgetfs_create_file(sb, CHIP, dev, &ep0_operations);
2040 /* other endpoint files are available after hardware setup,
2041 * from binding to a controller.
2053 /* "mount -t gadgetfs path /dev/gadget" ends up here */
2054 static struct dentry *
2055 gadgetfs_mount (struct file_system_type *t, int flags,
2056 const char *path, void *opts)
2058 return mount_single (t, flags, opts, gadgetfs_fill_super);
2062 gadgetfs_kill_sb (struct super_block *sb)
2064 kill_litter_super (sb);
2066 put_dev (the_device);
2073 /*----------------------------------------------------------------------*/
2075 static struct file_system_type gadgetfs_type = {
2076 .owner = THIS_MODULE,
2078 .mount = gadgetfs_mount,
2079 .kill_sb = gadgetfs_kill_sb,
2081 MODULE_ALIAS_FS("gadgetfs");
2083 /*----------------------------------------------------------------------*/
2085 static int __init init (void)
2089 status = register_filesystem (&gadgetfs_type);
2091 pr_info ("%s: %s, version " DRIVER_VERSION "\n",
2092 shortname, driver_desc);
2097 static void __exit cleanup (void)
2099 pr_debug ("unregister %s\n", shortname);
2100 unregister_filesystem (&gadgetfs_type);
2102 module_exit (cleanup);