2 * u_serial.c - utilities for USB gadget "serial port"/TTY support
4 * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
5 * Copyright (C) 2008 David Brownell
6 * Copyright (C) 2008 by Nokia Corporation
8 * This code also borrows from usbserial.c, which is
9 * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
10 * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
11 * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
13 * This software is distributed under the terms of the GNU General
14 * Public License ("GPL") as published by the Free Software Foundation,
15 * either version 2 of that License or (at your option) any later version.
18 /* #define VERBOSE_DEBUG */
20 #include <linux/kernel.h>
21 #include <linux/sched.h>
22 #include <linux/interrupt.h>
23 #include <linux/device.h>
24 #include <linux/delay.h>
25 #include <linux/tty.h>
26 #include <linux/tty_flip.h>
27 #include <linux/slab.h>
28 #include <linux/export.h>
29 #include <linux/module.h>
35 * This component encapsulates the TTY layer glue needed to provide basic
36 * "serial port" functionality through the USB gadget stack. Each such
37 * port is exposed through a /dev/ttyGS* node.
39 * After this module has been loaded, the individual TTY port can be requested
40 * (gserial_alloc_line()) and it will stay available until they are removed
41 * (gserial_free_line()). Each one may be connected to a USB function
42 * (gserial_connect), or disconnected (with gserial_disconnect) when the USB
43 * host issues a config change event. Data can only flow when the port is
44 * connected to the host.
46 * A given TTY port can be made available in multiple configurations.
47 * For example, each one might expose a ttyGS0 node which provides a
48 * login application. In one case that might use CDC ACM interface 0,
49 * while another configuration might use interface 3 for that. The
50 * work to handle that (including descriptor management) is not part
53 * Configurations may expose more than one TTY port. For example, if
54 * ttyGS0 provides login service, then ttyGS1 might provide dialer access
55 * for a telephone or fax link. And ttyGS2 might be something that just
56 * needs a simple byte stream interface for some messaging protocol that
57 * is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
60 * gserial is the lifecycle interface, used by USB functions
61 * gs_port is the I/O nexus, used by the tty driver
62 * tty_struct links to the tty/filesystem framework
64 * gserial <---> gs_port ... links will be null when the USB link is
65 * inactive; managed by gserial_{connect,disconnect}(). each gserial
66 * instance can wrap its own USB control protocol.
67 * gserial->ioport == usb_ep->driver_data ... gs_port
68 * gs_port->port_usb ... gserial
70 * gs_port <---> tty_struct ... links will be null when the TTY file
71 * isn't opened; managed by gs_open()/gs_close()
72 * gserial->port_tty ... tty_struct
73 * tty_struct->driver_data ... gserial
76 /* RX and TX queues can buffer QUEUE_SIZE packets before they hit the
77 * next layer of buffering. For TX that's a circular buffer; for RX
78 * consider it a NOP. A third layer is provided by the TTY code.
81 #define WRITE_BUF_SIZE 8192 /* TX only */
92 * The port structure holds info for each port, one for each minor number
93 * (and thus for each /dev/ node).
97 spinlock_t port_lock; /* guard port_* access */
99 struct gserial *port_usb;
101 bool openclose; /* open/close in progress */
104 struct list_head read_pool;
107 struct list_head read_queue;
109 struct tasklet_struct push;
111 struct list_head write_pool;
114 struct gs_buf port_write_buf;
115 wait_queue_head_t drain_wait; /* wait while writes drain */
117 wait_queue_head_t close_wait;
119 /* REVISIT this state ... */
120 struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
123 static struct portmaster {
124 struct mutex lock; /* protect open/close */
125 struct gs_port *port;
126 } ports[MAX_U_SERIAL_PORTS];
128 #define GS_CLOSE_TIMEOUT 15 /* seconds */
134 #define pr_vdebug(fmt, arg...) \
136 #endif /* pr_vdebug */
139 #define pr_vdebug(fmt, arg...) \
140 ({ if (0) pr_debug(fmt, ##arg); })
141 #endif /* pr_vdebug */
144 /*-------------------------------------------------------------------------*/
146 /* Circular Buffer */
151 * Allocate a circular buffer and all associated memory.
153 static int gs_buf_alloc(struct gs_buf *gb, unsigned size)
155 gb->buf_buf = kmalloc(size, GFP_KERNEL);
156 if (gb->buf_buf == NULL)
160 gb->buf_put = gb->buf_buf;
161 gb->buf_get = gb->buf_buf;
169 * Free the buffer and all associated memory.
171 static void gs_buf_free(struct gs_buf *gb)
180 * Clear out all data in the circular buffer.
182 static void gs_buf_clear(struct gs_buf *gb)
184 gb->buf_get = gb->buf_put;
185 /* equivalent to a get of all data available */
191 * Return the number of bytes of data written into the circular
194 static unsigned gs_buf_data_avail(struct gs_buf *gb)
196 return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
202 * Return the number of bytes of space available in the circular
205 static unsigned gs_buf_space_avail(struct gs_buf *gb)
207 return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
213 * Copy data data from a user buffer and put it into the circular buffer.
214 * Restrict to the amount of space available.
216 * Return the number of bytes copied.
219 gs_buf_put(struct gs_buf *gb, const char *buf, unsigned count)
223 len = gs_buf_space_avail(gb);
230 len = gb->buf_buf + gb->buf_size - gb->buf_put;
232 memcpy(gb->buf_put, buf, len);
233 memcpy(gb->buf_buf, buf+len, count - len);
234 gb->buf_put = gb->buf_buf + count - len;
236 memcpy(gb->buf_put, buf, count);
238 gb->buf_put += count;
239 else /* count == len */
240 gb->buf_put = gb->buf_buf;
249 * Get data from the circular buffer and copy to the given buffer.
250 * Restrict to the amount of data available.
252 * Return the number of bytes copied.
255 gs_buf_get(struct gs_buf *gb, char *buf, unsigned count)
259 len = gs_buf_data_avail(gb);
266 len = gb->buf_buf + gb->buf_size - gb->buf_get;
268 memcpy(buf, gb->buf_get, len);
269 memcpy(buf+len, gb->buf_buf, count - len);
270 gb->buf_get = gb->buf_buf + count - len;
272 memcpy(buf, gb->buf_get, count);
274 gb->buf_get += count;
275 else /* count == len */
276 gb->buf_get = gb->buf_buf;
282 /*-------------------------------------------------------------------------*/
284 /* I/O glue between TTY (upper) and USB function (lower) driver layers */
289 * Allocate a usb_request and its buffer. Returns a pointer to the
290 * usb_request or NULL if there is an error.
293 gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
295 struct usb_request *req;
297 req = usb_ep_alloc_request(ep, kmalloc_flags);
301 req->buf = kmalloc(len, kmalloc_flags);
302 if (req->buf == NULL) {
303 usb_ep_free_request(ep, req);
310 EXPORT_SYMBOL_GPL(gs_alloc_req);
315 * Free a usb_request and its buffer.
317 void gs_free_req(struct usb_ep *ep, struct usb_request *req)
320 usb_ep_free_request(ep, req);
322 EXPORT_SYMBOL_GPL(gs_free_req);
327 * If there is data to send, a packet is built in the given
328 * buffer and the size is returned. If there is no data to
329 * send, 0 is returned.
331 * Called with port_lock held.
334 gs_send_packet(struct gs_port *port, char *packet, unsigned size)
338 len = gs_buf_data_avail(&port->port_write_buf);
342 size = gs_buf_get(&port->port_write_buf, packet, size);
349 * This function finds available write requests, calls
350 * gs_send_packet to fill these packets with data, and
351 * continues until either there are no more write requests
352 * available or no more data to send. This function is
353 * run whenever data arrives or write requests are available.
355 * Context: caller owns port_lock; port_usb is non-null.
357 static int gs_start_tx(struct gs_port *port)
359 __releases(&port->port_lock)
360 __acquires(&port->port_lock)
363 struct list_head *pool = &port->write_pool;
366 bool do_tty_wake = false;
371 in = port->port_usb->in;
373 while (!port->write_busy && !list_empty(pool)) {
374 struct usb_request *req;
377 if (port->write_started >= QUEUE_SIZE)
380 req = list_entry(pool->next, struct usb_request, list);
381 len = gs_send_packet(port, req->buf, in->maxpacket);
383 wake_up_interruptible(&port->drain_wait);
389 list_del(&req->list);
390 req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0);
392 pr_vdebug("ttyGS%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
393 port->port_num, len, *((u8 *)req->buf),
394 *((u8 *)req->buf+1), *((u8 *)req->buf+2));
396 /* Drop lock while we call out of driver; completions
397 * could be issued while we do so. Disconnection may
398 * happen too; maybe immediately before we queue this!
400 * NOTE that we may keep sending data for a while after
401 * the TTY closed (dev->ioport->port_tty is NULL).
403 port->write_busy = true;
404 spin_unlock(&port->port_lock);
405 status = usb_ep_queue(in, req, GFP_ATOMIC);
406 spin_lock(&port->port_lock);
407 port->write_busy = false;
410 pr_debug("%s: %s %s err %d\n",
411 __func__, "queue", in->name, status);
412 list_add(&req->list, pool);
416 port->write_started++;
418 /* abort immediately after disconnect */
423 if (do_tty_wake && port->port.tty)
424 tty_wakeup(port->port.tty);
429 * Context: caller owns port_lock, and port_usb is set
431 static unsigned gs_start_rx(struct gs_port *port)
433 __releases(&port->port_lock)
434 __acquires(&port->port_lock)
437 struct list_head *pool = &port->read_pool;
438 struct usb_ep *out = port->port_usb->out;
440 while (!list_empty(pool)) {
441 struct usb_request *req;
443 struct tty_struct *tty;
445 /* no more rx if closed */
446 tty = port->port.tty;
450 if (port->read_started >= QUEUE_SIZE)
453 req = list_entry(pool->next, struct usb_request, list);
454 list_del(&req->list);
455 req->length = out->maxpacket;
457 /* drop lock while we call out; the controller driver
458 * may need to call us back (e.g. for disconnect)
460 spin_unlock(&port->port_lock);
461 status = usb_ep_queue(out, req, GFP_ATOMIC);
462 spin_lock(&port->port_lock);
465 pr_debug("%s: %s %s err %d\n",
466 __func__, "queue", out->name, status);
467 list_add(&req->list, pool);
470 port->read_started++;
472 /* abort immediately after disconnect */
476 return port->read_started;
480 * RX tasklet takes data out of the RX queue and hands it up to the TTY
481 * layer until it refuses to take any more data (or is throttled back).
482 * Then it issues reads for any further data.
484 * If the RX queue becomes full enough that no usb_request is queued,
485 * the OUT endpoint may begin NAKing as soon as its FIFO fills up.
486 * So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
487 * can be buffered before the TTY layer's buffers (currently 64 KB).
489 static void gs_rx_push(unsigned long _port)
491 struct gs_port *port = (void *)_port;
492 struct tty_struct *tty;
493 struct list_head *queue = &port->read_queue;
494 bool disconnect = false;
495 bool do_push = false;
497 /* hand any queued data to the tty */
498 spin_lock_irq(&port->port_lock);
499 tty = port->port.tty;
500 while (!list_empty(queue)) {
501 struct usb_request *req;
503 req = list_first_entry(queue, struct usb_request, list);
505 /* leave data queued if tty was rx throttled */
506 if (tty && test_bit(TTY_THROTTLED, &tty->flags))
509 switch (req->status) {
512 pr_vdebug("ttyGS%d: shutdown\n", port->port_num);
516 /* presumably a transient fault */
517 pr_warn("ttyGS%d: unexpected RX status %d\n",
518 port->port_num, req->status);
521 /* normal completion */
525 /* push data to (open) tty */
526 if (req->actual && tty) {
527 char *packet = req->buf;
528 unsigned size = req->actual;
532 /* we may have pushed part of this packet already... */
539 count = tty_insert_flip_string(&port->port, packet,
544 /* stop pushing; TTY layer can't handle more */
545 port->n_read += count;
546 pr_vdebug("ttyGS%d: rx block %d/%d\n",
547 port->port_num, count, req->actual);
553 list_move(&req->list, &port->read_pool);
554 port->read_started--;
557 /* Push from tty to ldisc; this is handled by a workqueue,
558 * so we won't get callbacks and can hold port_lock
561 tty_flip_buffer_push(&port->port);
564 /* We want our data queue to become empty ASAP, keeping data
565 * in the tty and ldisc (not here). If we couldn't push any
566 * this time around, there may be trouble unless there's an
567 * implicit tty_unthrottle() call on its way...
569 * REVISIT we should probably add a timer to keep the tasklet
570 * from starving ... but it's not clear that case ever happens.
572 if (!list_empty(queue) && tty) {
573 if (!test_bit(TTY_THROTTLED, &tty->flags)) {
575 tasklet_schedule(&port->push);
577 pr_warn("ttyGS%d: RX not scheduled?\n",
582 /* If we're still connected, refill the USB RX queue. */
583 if (!disconnect && port->port_usb)
586 spin_unlock_irq(&port->port_lock);
589 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
591 struct gs_port *port = ep->driver_data;
593 /* Queue all received data until the tty layer is ready for it. */
594 spin_lock(&port->port_lock);
595 list_add_tail(&req->list, &port->read_queue);
596 tasklet_schedule(&port->push);
597 spin_unlock(&port->port_lock);
600 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
602 struct gs_port *port = ep->driver_data;
604 spin_lock(&port->port_lock);
605 list_add(&req->list, &port->write_pool);
606 port->write_started--;
608 switch (req->status) {
610 /* presumably a transient fault */
611 pr_warning("%s: unexpected %s status %d\n",
612 __func__, ep->name, req->status);
615 /* normal completion */
621 pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
625 spin_unlock(&port->port_lock);
628 static void gs_free_requests(struct usb_ep *ep, struct list_head *head,
631 struct usb_request *req;
633 while (!list_empty(head)) {
634 req = list_entry(head->next, struct usb_request, list);
635 list_del(&req->list);
636 gs_free_req(ep, req);
642 static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
643 void (*fn)(struct usb_ep *, struct usb_request *),
647 struct usb_request *req;
648 int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE;
650 /* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
651 * do quite that many this time, don't fail ... we just won't
652 * be as speedy as we might otherwise be.
654 for (i = 0; i < n; i++) {
655 req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
657 return list_empty(head) ? -ENOMEM : 0;
659 list_add_tail(&req->list, head);
667 * gs_start_io - start USB I/O streams
668 * @dev: encapsulates endpoints to use
669 * Context: holding port_lock; port_tty and port_usb are non-null
671 * We only start I/O when something is connected to both sides of
672 * this port. If nothing is listening on the host side, we may
673 * be pointlessly filling up our TX buffers and FIFO.
675 static int gs_start_io(struct gs_port *port)
677 struct list_head *head = &port->read_pool;
678 struct usb_ep *ep = port->port_usb->out;
682 /* Allocate RX and TX I/O buffers. We can't easily do this much
683 * earlier (with GFP_KERNEL) because the requests are coupled to
684 * endpoints, as are the packet sizes we'll be using. Different
685 * configurations may use different endpoints with a given port;
686 * and high speed vs full speed changes packet sizes too.
688 status = gs_alloc_requests(ep, head, gs_read_complete,
689 &port->read_allocated);
693 status = gs_alloc_requests(port->port_usb->in, &port->write_pool,
694 gs_write_complete, &port->write_allocated);
696 gs_free_requests(ep, head, &port->read_allocated);
700 /* queue read requests */
702 started = gs_start_rx(port);
706 /* Unblock any pending writes into our circular buffer, in case
707 * we didn't in gs_start_tx() */
708 tty_wakeup(port->port.tty);
710 gs_free_requests(ep, head, &port->read_allocated);
711 gs_free_requests(port->port_usb->in, &port->write_pool,
712 &port->write_allocated);
719 /*-------------------------------------------------------------------------*/
724 * gs_open sets up the link between a gs_port and its associated TTY.
725 * That link is broken *only* by TTY close(), and all driver methods
728 static int gs_open(struct tty_struct *tty, struct file *file)
730 int port_num = tty->index;
731 struct gs_port *port;
735 mutex_lock(&ports[port_num].lock);
736 port = ports[port_num].port;
740 spin_lock_irq(&port->port_lock);
742 /* already open? Great. */
743 if (port->port.count) {
747 /* currently opening/closing? wait ... */
748 } else if (port->openclose) {
751 /* ... else we do the work */
754 port->openclose = true;
756 spin_unlock_irq(&port->port_lock);
758 mutex_unlock(&ports[port_num].lock);
765 /* must do the work */
768 /* wait for EAGAIN task to finish */
770 /* REVISIT could have a waitchannel here, if
771 * concurrent open performance is important
775 } while (status != -EAGAIN);
777 /* Do the "real open" */
778 spin_lock_irq(&port->port_lock);
780 /* allocate circular buffer on first open */
781 if (port->port_write_buf.buf_buf == NULL) {
783 spin_unlock_irq(&port->port_lock);
784 status = gs_buf_alloc(&port->port_write_buf, WRITE_BUF_SIZE);
785 spin_lock_irq(&port->port_lock);
788 pr_debug("gs_open: ttyGS%d (%p,%p) no buffer\n",
789 port->port_num, tty, file);
790 port->openclose = false;
791 goto exit_unlock_port;
795 /* REVISIT if REMOVED (ports[].port NULL), abort the open
796 * to let rmmod work faster (but this way isn't wrong).
799 /* REVISIT maybe wait for "carrier detect" */
801 tty->driver_data = port;
802 port->port.tty = tty;
804 port->port.count = 1;
805 port->openclose = false;
807 /* if connected, start the I/O stream */
808 if (port->port_usb) {
809 struct gserial *gser = port->port_usb;
811 pr_debug("gs_open: start ttyGS%d\n", port->port_num);
818 pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
823 spin_unlock_irq(&port->port_lock);
827 static int gs_writes_finished(struct gs_port *p)
831 /* return true on disconnect or empty buffer */
832 spin_lock_irq(&p->port_lock);
833 cond = (p->port_usb == NULL) || !gs_buf_data_avail(&p->port_write_buf);
834 spin_unlock_irq(&p->port_lock);
839 static void gs_close(struct tty_struct *tty, struct file *file)
841 struct gs_port *port = tty->driver_data;
842 struct gserial *gser;
844 spin_lock_irq(&port->port_lock);
846 if (port->port.count != 1) {
847 if (port->port.count == 0)
854 pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file);
856 /* mark port as closing but in use; we can drop port lock
857 * and sleep if necessary
859 port->openclose = true;
860 port->port.count = 0;
862 gser = port->port_usb;
863 if (gser && gser->disconnect)
864 gser->disconnect(gser);
866 /* wait for circular write buffer to drain, disconnect, or at
867 * most GS_CLOSE_TIMEOUT seconds; then discard the rest
869 if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
870 spin_unlock_irq(&port->port_lock);
871 wait_event_interruptible_timeout(port->drain_wait,
872 gs_writes_finished(port),
873 GS_CLOSE_TIMEOUT * HZ);
874 spin_lock_irq(&port->port_lock);
875 gser = port->port_usb;
878 /* Iff we're disconnected, there can be no I/O in flight so it's
879 * ok to free the circular buffer; else just scrub it. And don't
880 * let the push tasklet fire again until we're re-opened.
883 gs_buf_free(&port->port_write_buf);
885 gs_buf_clear(&port->port_write_buf);
887 port->port.tty = NULL;
889 port->openclose = false;
891 pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
892 port->port_num, tty, file);
894 wake_up(&port->close_wait);
896 spin_unlock_irq(&port->port_lock);
899 static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
901 struct gs_port *port = tty->driver_data;
905 pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
906 port->port_num, tty, count);
908 spin_lock_irqsave(&port->port_lock, flags);
910 count = gs_buf_put(&port->port_write_buf, buf, count);
911 /* treat count == 0 as flush_chars() */
913 status = gs_start_tx(port);
914 spin_unlock_irqrestore(&port->port_lock, flags);
919 static int gs_put_char(struct tty_struct *tty, unsigned char ch)
921 struct gs_port *port = tty->driver_data;
925 pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %ps\n",
926 port->port_num, tty, ch, __builtin_return_address(0));
928 spin_lock_irqsave(&port->port_lock, flags);
929 status = gs_buf_put(&port->port_write_buf, &ch, 1);
930 spin_unlock_irqrestore(&port->port_lock, flags);
935 static void gs_flush_chars(struct tty_struct *tty)
937 struct gs_port *port = tty->driver_data;
940 pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
942 spin_lock_irqsave(&port->port_lock, flags);
945 spin_unlock_irqrestore(&port->port_lock, flags);
948 static int gs_write_room(struct tty_struct *tty)
950 struct gs_port *port = tty->driver_data;
954 spin_lock_irqsave(&port->port_lock, flags);
956 room = gs_buf_space_avail(&port->port_write_buf);
957 spin_unlock_irqrestore(&port->port_lock, flags);
959 pr_vdebug("gs_write_room: (%d,%p) room=%d\n",
960 port->port_num, tty, room);
965 static int gs_chars_in_buffer(struct tty_struct *tty)
967 struct gs_port *port = tty->driver_data;
971 spin_lock_irqsave(&port->port_lock, flags);
972 chars = gs_buf_data_avail(&port->port_write_buf);
973 spin_unlock_irqrestore(&port->port_lock, flags);
975 pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
976 port->port_num, tty, chars);
981 /* undo side effects of setting TTY_THROTTLED */
982 static void gs_unthrottle(struct tty_struct *tty)
984 struct gs_port *port = tty->driver_data;
987 spin_lock_irqsave(&port->port_lock, flags);
988 if (port->port_usb) {
989 /* Kickstart read queue processing. We don't do xon/xoff,
990 * rts/cts, or other handshaking with the host, but if the
991 * read queue backs up enough we'll be NAKing OUT packets.
993 tasklet_schedule(&port->push);
994 pr_vdebug("ttyGS%d: unthrottle\n", port->port_num);
996 spin_unlock_irqrestore(&port->port_lock, flags);
999 static int gs_break_ctl(struct tty_struct *tty, int duration)
1001 struct gs_port *port = tty->driver_data;
1003 struct gserial *gser;
1005 pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n",
1006 port->port_num, duration);
1008 spin_lock_irq(&port->port_lock);
1009 gser = port->port_usb;
1010 if (gser && gser->send_break)
1011 status = gser->send_break(gser, duration);
1012 spin_unlock_irq(&port->port_lock);
1017 static const struct tty_operations gs_tty_ops = {
1021 .put_char = gs_put_char,
1022 .flush_chars = gs_flush_chars,
1023 .write_room = gs_write_room,
1024 .chars_in_buffer = gs_chars_in_buffer,
1025 .unthrottle = gs_unthrottle,
1026 .break_ctl = gs_break_ctl,
1029 /*-------------------------------------------------------------------------*/
1031 static struct tty_driver *gs_tty_driver;
1034 gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
1036 struct gs_port *port;
1039 mutex_lock(&ports[port_num].lock);
1040 if (ports[port_num].port) {
1045 port = kzalloc(sizeof(struct gs_port), GFP_KERNEL);
1051 tty_port_init(&port->port);
1052 spin_lock_init(&port->port_lock);
1053 init_waitqueue_head(&port->drain_wait);
1054 init_waitqueue_head(&port->close_wait);
1056 tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
1058 INIT_LIST_HEAD(&port->read_pool);
1059 INIT_LIST_HEAD(&port->read_queue);
1060 INIT_LIST_HEAD(&port->write_pool);
1062 port->port_num = port_num;
1063 port->port_line_coding = *coding;
1065 ports[port_num].port = port;
1067 mutex_unlock(&ports[port_num].lock);
1071 static int gs_closed(struct gs_port *port)
1075 spin_lock_irq(&port->port_lock);
1076 cond = (port->port.count == 0) && !port->openclose;
1077 spin_unlock_irq(&port->port_lock);
1081 static void gserial_free_port(struct gs_port *port)
1083 tasklet_kill(&port->push);
1084 /* wait for old opens to finish */
1085 wait_event(port->close_wait, gs_closed(port));
1086 WARN_ON(port->port_usb != NULL);
1087 tty_port_destroy(&port->port);
1091 void gserial_free_line(unsigned char port_num)
1093 struct gs_port *port;
1095 mutex_lock(&ports[port_num].lock);
1096 if (WARN_ON(!ports[port_num].port)) {
1097 mutex_unlock(&ports[port_num].lock);
1100 port = ports[port_num].port;
1101 ports[port_num].port = NULL;
1102 mutex_unlock(&ports[port_num].lock);
1104 gserial_free_port(port);
1105 tty_unregister_device(gs_tty_driver, port_num);
1107 EXPORT_SYMBOL_GPL(gserial_free_line);
1109 int gserial_alloc_line(unsigned char *line_num)
1111 struct usb_cdc_line_coding coding;
1112 struct device *tty_dev;
1116 coding.dwDTERate = cpu_to_le32(9600);
1117 coding.bCharFormat = 8;
1118 coding.bParityType = USB_CDC_NO_PARITY;
1119 coding.bDataBits = USB_CDC_1_STOP_BITS;
1121 for (port_num = 0; port_num < MAX_U_SERIAL_PORTS; port_num++) {
1122 ret = gs_port_alloc(port_num, &coding);
1132 /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */
1134 tty_dev = tty_port_register_device(&ports[port_num].port->port,
1135 gs_tty_driver, port_num, NULL);
1136 if (IS_ERR(tty_dev)) {
1137 struct gs_port *port;
1138 pr_err("%s: failed to register tty for port %d, err %ld\n",
1139 __func__, port_num, PTR_ERR(tty_dev));
1141 ret = PTR_ERR(tty_dev);
1142 mutex_lock(&ports[port_num].lock);
1143 port = ports[port_num].port;
1144 ports[port_num].port = NULL;
1145 mutex_unlock(&ports[port_num].lock);
1146 gserial_free_port(port);
1149 *line_num = port_num;
1153 EXPORT_SYMBOL_GPL(gserial_alloc_line);
1156 * gserial_connect - notify TTY I/O glue that USB link is active
1157 * @gser: the function, set up with endpoints and descriptors
1158 * @port_num: which port is active
1159 * Context: any (usually from irq)
1161 * This is called activate endpoints and let the TTY layer know that
1162 * the connection is active ... not unlike "carrier detect". It won't
1163 * necessarily start I/O queues; unless the TTY is held open by any
1164 * task, there would be no point. However, the endpoints will be
1165 * activated so the USB host can perform I/O, subject to basic USB
1166 * hardware flow control.
1168 * Caller needs to have set up the endpoints and USB function in @dev
1169 * before calling this, as well as the appropriate (speed-specific)
1170 * endpoint descriptors, and also have allocate @port_num by calling
1171 * @gserial_alloc_line().
1173 * Returns negative errno or zero.
1174 * On success, ep->driver_data will be overwritten.
1176 int gserial_connect(struct gserial *gser, u8 port_num)
1178 struct gs_port *port;
1179 unsigned long flags;
1182 if (port_num >= MAX_U_SERIAL_PORTS)
1185 port = ports[port_num].port;
1187 pr_err("serial line %d not allocated.\n", port_num);
1190 if (port->port_usb) {
1191 pr_err("serial line %d is in use.\n", port_num);
1195 /* activate the endpoints */
1196 status = usb_ep_enable(gser->in);
1199 gser->in->driver_data = port;
1201 status = usb_ep_enable(gser->out);
1204 gser->out->driver_data = port;
1206 /* then tell the tty glue that I/O can work */
1207 spin_lock_irqsave(&port->port_lock, flags);
1208 gser->ioport = port;
1209 port->port_usb = gser;
1211 /* REVISIT unclear how best to handle this state...
1212 * we don't really couple it with the Linux TTY.
1214 gser->port_line_coding = port->port_line_coding;
1216 /* REVISIT if waiting on "carrier detect", signal. */
1218 /* if it's already open, start I/O ... and notify the serial
1219 * protocol about open/close status (connect/disconnect).
1221 if (port->port.count) {
1222 pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
1225 gser->connect(gser);
1227 if (gser->disconnect)
1228 gser->disconnect(gser);
1231 spin_unlock_irqrestore(&port->port_lock, flags);
1236 usb_ep_disable(gser->in);
1239 EXPORT_SYMBOL_GPL(gserial_connect);
1241 * gserial_disconnect - notify TTY I/O glue that USB link is inactive
1242 * @gser: the function, on which gserial_connect() was called
1243 * Context: any (usually from irq)
1245 * This is called to deactivate endpoints and let the TTY layer know
1246 * that the connection went inactive ... not unlike "hangup".
1248 * On return, the state is as if gserial_connect() had never been called;
1249 * there is no active USB I/O on these endpoints.
1251 void gserial_disconnect(struct gserial *gser)
1253 struct gs_port *port = gser->ioport;
1254 unsigned long flags;
1259 /* tell the TTY glue not to do I/O here any more */
1260 spin_lock_irqsave(&port->port_lock, flags);
1262 /* REVISIT as above: how best to track this? */
1263 port->port_line_coding = gser->port_line_coding;
1265 port->port_usb = NULL;
1266 gser->ioport = NULL;
1267 if (port->port.count > 0 || port->openclose) {
1268 wake_up_interruptible(&port->drain_wait);
1270 tty_hangup(port->port.tty);
1272 spin_unlock_irqrestore(&port->port_lock, flags);
1274 /* disable endpoints, aborting down any active I/O */
1275 usb_ep_disable(gser->out);
1276 usb_ep_disable(gser->in);
1278 /* finally, free any unused/unusable I/O buffers */
1279 spin_lock_irqsave(&port->port_lock, flags);
1280 if (port->port.count == 0 && !port->openclose)
1281 gs_buf_free(&port->port_write_buf);
1282 gs_free_requests(gser->out, &port->read_pool, NULL);
1283 gs_free_requests(gser->out, &port->read_queue, NULL);
1284 gs_free_requests(gser->in, &port->write_pool, NULL);
1286 port->read_allocated = port->read_started =
1287 port->write_allocated = port->write_started = 0;
1289 spin_unlock_irqrestore(&port->port_lock, flags);
1291 EXPORT_SYMBOL_GPL(gserial_disconnect);
1293 static int userial_init(void)
1298 gs_tty_driver = alloc_tty_driver(MAX_U_SERIAL_PORTS);
1302 gs_tty_driver->driver_name = "g_serial";
1303 gs_tty_driver->name = "ttyGS";
1304 /* uses dynamically assigned dev_t values */
1306 gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
1307 gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
1308 gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
1309 gs_tty_driver->init_termios = tty_std_termios;
1311 /* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on
1312 * MS-Windows. Otherwise, most of these flags shouldn't affect
1313 * anything unless we were to actually hook up to a serial line.
1315 gs_tty_driver->init_termios.c_cflag =
1316 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1317 gs_tty_driver->init_termios.c_ispeed = 9600;
1318 gs_tty_driver->init_termios.c_ospeed = 9600;
1320 tty_set_operations(gs_tty_driver, &gs_tty_ops);
1321 for (i = 0; i < MAX_U_SERIAL_PORTS; i++)
1322 mutex_init(&ports[i].lock);
1324 /* export the driver ... */
1325 status = tty_register_driver(gs_tty_driver);
1327 pr_err("%s: cannot register, err %d\n",
1332 pr_debug("%s: registered %d ttyGS* device%s\n", __func__,
1334 (MAX_U_SERIAL_PORTS == 1) ? "" : "s");
1338 put_tty_driver(gs_tty_driver);
1339 gs_tty_driver = NULL;
1342 module_init(userial_init);
1344 static void userial_cleanup(void)
1346 tty_unregister_driver(gs_tty_driver);
1347 put_tty_driver(gs_tty_driver);
1348 gs_tty_driver = NULL;
1350 module_exit(userial_cleanup);
1352 MODULE_LICENSE("GPL");