drivers/usb/dwc2/hcd.c

   1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
   2 /*
   3  * hcd.c - DesignWare HS OTG Controller host-mode routines
   4  *
   5  * Copyright (C) 2004-2013 Synopsys, Inc.
   6  */
   7
   8 /*
   9  * This file contains the core HCD code, and implements the Linux hc_driver
  10  * API
  11  */
  12 #include <linux/kernel.h>
  13 #include <linux/module.h>
  14 #include <linux/spinlock.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/dma-mapping.h>
  18 #include <linux/delay.h>
  19 #include <linux/io.h>
  20 #include <linux/slab.h>
  21 #include <linux/usb.h>
  22
  23 #include <linux/usb/hcd.h>
  24 #include <linux/usb/ch11.h>
  25 #include <linux/usb/of.h>
  26
  27 #include "core.h"
  28 #include "hcd.h"
  29
  30 /*
  31  * =========================================================================
  32  *  Host Core Layer Functions
  33  * =========================================================================
  34  */
  35
  36 /**
  37  * dwc2_enable_common_interrupts() - Initializes the commmon interrupts,
  38  * used in both device and host modes
  39  *
  40  * @hsotg: Programming view of the DWC_otg controller
  41  */
  42 static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
  43 {
  44         u32 intmsk;
  45
  46         /* Clear any pending OTG Interrupts */
  47         dwc2_writel(hsotg, 0xffffffff, GOTGINT);
  48
  49         /* Clear any pending interrupts */
  50         dwc2_writel(hsotg, 0xffffffff, GINTSTS);
  51
  52         /* Enable the interrupts in the GINTMSK */
  53         intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT;
  54
  55         if (!hsotg->params.host_dma)
  56                 intmsk |= GINTSTS_RXFLVL;
  57         if (!hsotg->params.external_id_pin_ctl)
  58                 intmsk |= GINTSTS_CONIDSTSCHNG;
  59
  60         intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP |
  61                   GINTSTS_SESSREQINT;
  62
  63         if (dwc2_is_device_mode(hsotg) && hsotg->params.lpm)
  64                 intmsk |= GINTSTS_LPMTRANRCVD;
  65
  66         dwc2_writel(hsotg, intmsk, GINTMSK);
  67 }
  68
  69 static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
  70 {
  71         u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
  72
  73         switch (hsotg->hw_params.arch) {
  74         case GHWCFG2_EXT_DMA_ARCH:
  75                 dev_err(hsotg->dev, "External DMA Mode not supported\n");
  76                 return -EINVAL;
  77
  78         case GHWCFG2_INT_DMA_ARCH:
  79                 dev_dbg(hsotg->dev, "Internal DMA Mode\n");
  80                 if (hsotg->params.ahbcfg != -1) {
  81                         ahbcfg &= GAHBCFG_CTRL_MASK;
  82                         ahbcfg |= hsotg->params.ahbcfg &
  83                                   ~GAHBCFG_CTRL_MASK;
  84                 }
  85                 break;
  86
  87         case GHWCFG2_SLAVE_ONLY_ARCH:
  88         default:
  89                 dev_dbg(hsotg->dev, "Slave Only Mode\n");
  90                 break;
  91         }
  92
  93         if (hsotg->params.host_dma)
  94                 ahbcfg |= GAHBCFG_DMA_EN;
  95         else
  96                 hsotg->params.dma_desc_enable = false;
  97
  98         dwc2_writel(hsotg, ahbcfg, GAHBCFG);
  99
 100         return 0;
 101 }
 102
 103 static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
 104 {
 105         u32 usbcfg;
 106
 107         usbcfg = dwc2_readl(hsotg, GUSBCFG);
 108         usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
 109
 110         switch (hsotg->hw_params.op_mode) {
 111         case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
 112                 if (hsotg->params.otg_caps.hnp_support &&
 113                     hsotg->params.otg_caps.srp_support)
 114                         usbcfg |= GUSBCFG_HNPCAP;
 115                 fallthrough;
 116
 117         case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
 118         case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
 119         case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
 120                 if (hsotg->params.otg_caps.srp_support)
 121                         usbcfg |= GUSBCFG_SRPCAP;
 122                 break;
 123
 124         case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE:
 125         case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE:
 126         case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST:
 127         default:
 128                 break;
 129         }
 130
 131         dwc2_writel(hsotg, usbcfg, GUSBCFG);
 132 }
 133
 134 static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg)
 135 {
 136         if (hsotg->vbus_supply)
 137                 return regulator_enable(hsotg->vbus_supply);
 138
 139         return 0;
 140 }
 141
 142 static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg)
 143 {
 144         if (hsotg->vbus_supply)
 145                 return regulator_disable(hsotg->vbus_supply);
 146
 147         return 0;
 148 }
 149
 150 /**
 151  * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
 152  *
 153  * @hsotg: Programming view of DWC_otg controller
 154  */
 155 static void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg)
 156 {
 157         u32 intmsk;
 158
 159         dev_dbg(hsotg->dev, "%s()\n", __func__);
 160
 161         /* Disable all interrupts */
 162         dwc2_writel(hsotg, 0, GINTMSK);
 163         dwc2_writel(hsotg, 0, HAINTMSK);
 164
 165         /* Enable the common interrupts */
 166         dwc2_enable_common_interrupts(hsotg);
 167
 168         /* Enable host mode interrupts without disturbing common interrupts */
 169         intmsk = dwc2_readl(hsotg, GINTMSK);
 170         intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT;
 171         dwc2_writel(hsotg, intmsk, GINTMSK);
 172 }
 173
 174 /**
 175  * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts
 176  *
 177  * @hsotg: Programming view of DWC_otg controller
 178  */
 179 static void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
 180 {
 181         u32 intmsk = dwc2_readl(hsotg, GINTMSK);
 182
 183         /* Disable host mode interrupts without disturbing common interrupts */
 184         intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT |
 185                     GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT);
 186         dwc2_writel(hsotg, intmsk, GINTMSK);
 187 }
 188
 189 /*
 190  * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size
 191  * For system that have a total fifo depth that is smaller than the default
 192  * RX + TX fifo size.
 193  *
 194  * @hsotg: Programming view of DWC_otg controller
 195  */
 196 static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg)
 197 {
 198         struct dwc2_core_params *params = &hsotg->params;
 199         struct dwc2_hw_params *hw = &hsotg->hw_params;
 200         u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size;
 201
 202         total_fifo_size = hw->total_fifo_size;
 203         rxfsiz = params->host_rx_fifo_size;
 204         nptxfsiz = params->host_nperio_tx_fifo_size;
 205         ptxfsiz = params->host_perio_tx_fifo_size;
 206
 207         /*
 208          * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth
 209          * allocation with support for high bandwidth endpoints. Synopsys
 210          * defines MPS(Max Packet size) for a periodic EP=1024, and for
 211          * non-periodic as 512.
 212          */
 213         if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) {
 214                 /*
 215                  * For Buffer DMA mode/Scatter Gather DMA mode
 216                  * 2 * ((Largest Packet size / 4) + 1 + 1) + n
 217                  * with n = number of host channel.
 218                  * 2 * ((1024/4) + 2) = 516
 219                  */
 220                 rxfsiz = 516 + hw->host_channels;
 221
 222                 /*
 223                  * min non-periodic tx fifo depth
 224                  * 2 * (largest non-periodic USB packet used / 4)
 225                  * 2 * (512/4) = 256
 226                  */
 227                 nptxfsiz = 256;
 228
 229                 /*
 230                  * min periodic tx fifo depth
 231                  * (largest packet size*MC)/4
 232                  * (1024 * 3)/4 = 768
 233                  */
 234                 ptxfsiz = 768;
 235
 236                 params->host_rx_fifo_size = rxfsiz;
 237                 params->host_nperio_tx_fifo_size = nptxfsiz;
 238                 params->host_perio_tx_fifo_size = ptxfsiz;
 239         }
 240
 241         /*
 242          * If the summation of RX, NPTX and PTX fifo sizes is still
 243          * bigger than the total_fifo_size, then we have a problem.
 244          *
 245          * We won't be able to allocate as many endpoints. Right now,
 246          * we're just printing an error message, but ideally this FIFO
 247          * allocation algorithm would be improved in the future.
 248          *
 249          * FIXME improve this FIFO allocation algorithm.
 250          */
 251         if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)))
 252                 dev_err(hsotg->dev, "invalid fifo sizes\n");
 253 }
 254
 255 static void dwc2_config_fifos(struct dwc2_hsotg *hsotg)
 256 {
 257         struct dwc2_core_params *params = &hsotg->params;
 258         u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz;
 259
 260         if (!params->enable_dynamic_fifo)
 261                 return;
 262
 263         dwc2_calculate_dynamic_fifo(hsotg);
 264
 265         /* Rx FIFO */
 266         grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
 267         dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz);
 268         grxfsiz &= ~GRXFSIZ_DEPTH_MASK;
 269         grxfsiz |= params->host_rx_fifo_size <<
 270                    GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK;
 271         dwc2_writel(hsotg, grxfsiz, GRXFSIZ);
 272         dev_dbg(hsotg->dev, "new grxfsiz=%08x\n",
 273                 dwc2_readl(hsotg, GRXFSIZ));
 274
 275         /* Non-periodic Tx FIFO */
 276         dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n",
 277                 dwc2_readl(hsotg, GNPTXFSIZ));
 278         nptxfsiz = params->host_nperio_tx_fifo_size <<
 279                    FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
 280         nptxfsiz |= params->host_rx_fifo_size <<
 281                     FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
 282         dwc2_writel(hsotg, nptxfsiz, GNPTXFSIZ);
 283         dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n",
 284                 dwc2_readl(hsotg, GNPTXFSIZ));
 285
 286         /* Periodic Tx FIFO */
 287         dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n",
 288                 dwc2_readl(hsotg, HPTXFSIZ));
 289         hptxfsiz = params->host_perio_tx_fifo_size <<
 290                    FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
 291         hptxfsiz |= (params->host_rx_fifo_size +
 292                      params->host_nperio_tx_fifo_size) <<
 293                     FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
 294         dwc2_writel(hsotg, hptxfsiz, HPTXFSIZ);
 295         dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n",
 296                 dwc2_readl(hsotg, HPTXFSIZ));
 297
 298         if (hsotg->params.en_multiple_tx_fifo &&
 299             hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_91a) {
 300                 /*
 301                  * This feature was implemented in 2.91a version
 302                  * Global DFIFOCFG calculation for Host mode -
 303                  * include RxFIFO, NPTXFIFO and HPTXFIFO
 304                  */
 305                 dfifocfg = dwc2_readl(hsotg, GDFIFOCFG);
 306                 dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK;
 307                 dfifocfg |= (params->host_rx_fifo_size +
 308                              params->host_nperio_tx_fifo_size +
 309                              params->host_perio_tx_fifo_size) <<
 310                             GDFIFOCFG_EPINFOBASE_SHIFT &
 311                             GDFIFOCFG_EPINFOBASE_MASK;
 312                 dwc2_writel(hsotg, dfifocfg, GDFIFOCFG);
 313         }
 314 }
 315
 316 /**
 317  * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for
 318  * the HFIR register according to PHY type and speed
 319  *
 320  * @hsotg: Programming view of DWC_otg controller
 321  *
 322  * NOTE: The caller can modify the value of the HFIR register only after the
 323  * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort)
 324  * has been set
 325  */
 326 u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg)
 327 {
 328         u32 usbcfg;
 329         u32 hprt0;
 330         int clock = 60; /* default value */
 331
 332         usbcfg = dwc2_readl(hsotg, GUSBCFG);
 333         hprt0 = dwc2_readl(hsotg, HPRT0);
 334
 335         if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) &&
 336             !(usbcfg & GUSBCFG_PHYIF16))
 337                 clock = 60;
 338         if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type ==
 339             GHWCFG2_FS_PHY_TYPE_SHARED_ULPI)
 340                 clock = 48;
 341         if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
 342             !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
 343                 clock = 30;
 344         if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
 345             !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16))
 346                 clock = 60;
 347         if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
 348             !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
 349                 clock = 48;
 350         if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) &&
 351             hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI)
 352                 clock = 48;
 353         if ((usbcfg & GUSBCFG_PHYSEL) &&
 354             hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED)
 355                 clock = 48;
 356
 357         if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED)
 358                 /* High speed case */
 359                 return 125 * clock - 1;
 360
 361         /* FS/LS case */
 362         return 1000 * clock - 1;
 363 }
 364
 365 /**
 366  * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination
 367  * buffer
 368  *
 369  * @hsotg: Programming view of DWC_otg controller
 370  * @dest:    Destination buffer for the packet
 371  * @bytes:   Number of bytes to copy to the destination
 372  */
 373 void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes)
 374 {
 375         u32 *data_buf = (u32 *)dest;
 376         int word_count = (bytes + 3) / 4;
 377         int i;
 378
 379         /*
 380          * Todo: Account for the case where dest is not dword aligned. This
 381          * requires reading data from the FIFO into a u32 temp buffer, then
 382          * moving it into the data buffer.
 383          */
 384
 385         dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes);
 386
 387         for (i = 0; i < word_count; i++, data_buf++)
 388                 *data_buf = dwc2_readl(hsotg, HCFIFO(0));
 389 }
 390
 391 /**
 392  * dwc2_dump_channel_info() - Prints the state of a host channel
 393  *
 394  * @hsotg: Programming view of DWC_otg controller
 395  * @chan:  Pointer to the channel to dump
 396  *
 397  * Must be called with interrupt disabled and spinlock held
 398  *
 399  * NOTE: This function will be removed once the peripheral controller code
 400  * is integrated and the driver is stable
 401  */
 402 static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg,
 403                                    struct dwc2_host_chan *chan)
 404 {
 405 #ifdef VERBOSE_DEBUG
 406         int num_channels = hsotg->params.host_channels;
 407         struct dwc2_qh *qh;
 408         u32 hcchar;
 409         u32 hcsplt;
 410         u32 hctsiz;
 411         u32 hc_dma;
 412         int i;
 413
 414         if (!chan)
 415                 return;
 416
 417         hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
 418         hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num));
 419         hctsiz = dwc2_readl(hsotg, HCTSIZ(chan->hc_num));
 420         hc_dma = dwc2_readl(hsotg, HCDMA(chan->hc_num));
 421
 422         dev_dbg(hsotg->dev, "  Assigned to channel %p:\n", chan);
 423         dev_dbg(hsotg->dev, "    hcchar 0x%08x, hcsplt 0x%08x\n",
 424                 hcchar, hcsplt);
 425         dev_dbg(hsotg->dev, "    hctsiz 0x%08x, hc_dma 0x%08x\n",
 426                 hctsiz, hc_dma);
 427         dev_dbg(hsotg->dev, "    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
 428                 chan->dev_addr, chan->ep_num, chan->ep_is_in);
 429         dev_dbg(hsotg->dev, "    ep_type: %d\n", chan->ep_type);
 430         dev_dbg(hsotg->dev, "    max_packet: %d\n", chan->max_packet);
 431         dev_dbg(hsotg->dev, "    data_pid_start: %d\n", chan->data_pid_start);
 432         dev_dbg(hsotg->dev, "    xfer_started: %d\n", chan->xfer_started);
 433         dev_dbg(hsotg->dev, "    halt_status: %d\n", chan->halt_status);
 434         dev_dbg(hsotg->dev, "    xfer_buf: %p\n", chan->xfer_buf);
 435         dev_dbg(hsotg->dev, "    xfer_dma: %08lx\n",
 436                 (unsigned long)chan->xfer_dma);
 437         dev_dbg(hsotg->dev, "    xfer_len: %d\n", chan->xfer_len);
 438         dev_dbg(hsotg->dev, "    qh: %p\n", chan->qh);
 439         dev_dbg(hsotg->dev, "  NP inactive sched:\n");
 440         list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive,
 441                             qh_list_entry)
 442                 dev_dbg(hsotg->dev, "    %p\n", qh);
 443         dev_dbg(hsotg->dev, "  NP waiting sched:\n");
 444         list_for_each_entry(qh, &hsotg->non_periodic_sched_waiting,
 445                             qh_list_entry)
 446                 dev_dbg(hsotg->dev, "    %p\n", qh);
 447         dev_dbg(hsotg->dev, "  NP active sched:\n");
 448         list_for_each_entry(qh, &hsotg->non_periodic_sched_active,
 449                             qh_list_entry)
 450                 dev_dbg(hsotg->dev, "    %p\n", qh);
 451         dev_dbg(hsotg->dev, "  Channels:\n");
 452         for (i = 0; i < num_channels; i++) {
 453                 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i];
 454
 455                 dev_dbg(hsotg->dev, "    %2d: %p\n", i, chan);
 456         }
 457 #endif /* VERBOSE_DEBUG */
 458 }
 459
 460 static int _dwc2_hcd_start(struct usb_hcd *hcd);
 461
 462 static void dwc2_host_start(struct dwc2_hsotg *hsotg)
 463 {
 464         struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
 465
 466         hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg);
 467         _dwc2_hcd_start(hcd);
 468 }
 469
 470 static void dwc2_host_disconnect(struct dwc2_hsotg *hsotg)
 471 {
 472         struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
 473
 474         hcd->self.is_b_host = 0;
 475 }
 476
 477 static void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context,
 478                                int *hub_addr, int *hub_port)
 479 {
 480         struct urb *urb = context;
 481
 482         if (urb->dev->tt)
 483                 *hub_addr = urb->dev->tt->hub->devnum;
 484         else
 485                 *hub_addr = 0;
 486         *hub_port = urb->dev->ttport;
 487 }
 488
 489 /*
 490  * =========================================================================
 491  *  Low Level Host Channel Access Functions
 492  * =========================================================================
 493  */
 494
 495 static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg,
 496                                       struct dwc2_host_chan *chan)
 497 {
 498         u32 hcintmsk = HCINTMSK_CHHLTD;
 499
 500         switch (chan->ep_type) {
 501         case USB_ENDPOINT_XFER_CONTROL:
 502         case USB_ENDPOINT_XFER_BULK:
 503                 dev_vdbg(hsotg->dev, "control/bulk\n");
 504                 hcintmsk |= HCINTMSK_XFERCOMPL;
 505                 hcintmsk |= HCINTMSK_STALL;
 506                 hcintmsk |= HCINTMSK_XACTERR;
 507                 hcintmsk |= HCINTMSK_DATATGLERR;
 508                 if (chan->ep_is_in) {
 509                         hcintmsk |= HCINTMSK_BBLERR;
 510                 } else {
 511                         hcintmsk |= HCINTMSK_NAK;
 512                         hcintmsk |= HCINTMSK_NYET;
 513                         if (chan->do_ping)
 514                                 hcintmsk |= HCINTMSK_ACK;
 515                 }
 516
 517                 if (chan->do_split) {
 518                         hcintmsk |= HCINTMSK_NAK;
 519                         if (chan->complete_split)
 520                                 hcintmsk |= HCINTMSK_NYET;
 521                         else
 522                                 hcintmsk |= HCINTMSK_ACK;
 523                 }
 524
 525                 if (chan->error_state)
 526                         hcintmsk |= HCINTMSK_ACK;
 527                 break;
 528
 529         case USB_ENDPOINT_XFER_INT:
 530                 if (dbg_perio())
 531                         dev_vdbg(hsotg->dev, "intr\n");
 532                 hcintmsk |= HCINTMSK_XFERCOMPL;
 533                 hcintmsk |= HCINTMSK_NAK;
 534                 hcintmsk |= HCINTMSK_STALL;
 535                 hcintmsk |= HCINTMSK_XACTERR;
 536                 hcintmsk |= HCINTMSK_DATATGLERR;
 537                 hcintmsk |= HCINTMSK_FRMOVRUN;
 538
 539                 if (chan->ep_is_in)
 540                         hcintmsk |= HCINTMSK_BBLERR;
 541                 if (chan->error_state)
 542                         hcintmsk |= HCINTMSK_ACK;
 543                 if (chan->do_split) {
 544                         if (chan->complete_split)
 545                                 hcintmsk |= HCINTMSK_NYET;
 546                         else
 547                                 hcintmsk |= HCINTMSK_ACK;
 548                 }
 549                 break;
 550
 551         case USB_ENDPOINT_XFER_ISOC:
 552                 if (dbg_perio())
 553                         dev_vdbg(hsotg->dev, "isoc\n");
 554                 hcintmsk |= HCINTMSK_XFERCOMPL;
 555                 hcintmsk |= HCINTMSK_FRMOVRUN;
 556                 hcintmsk |= HCINTMSK_ACK;
 557
 558                 if (chan->ep_is_in) {
 559                         hcintmsk |= HCINTMSK_XACTERR;
 560                         hcintmsk |= HCINTMSK_BBLERR;
 561                 }
 562                 break;
 563         default:
 564                 dev_err(hsotg->dev, "## Unknown EP type ##\n");
 565                 break;
 566         }
 567
 568         dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
 569         if (dbg_hc(chan))
 570                 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
 571 }
 572
 573 static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg,
 574                                     struct dwc2_host_chan *chan)
 575 {
 576         u32 hcintmsk = HCINTMSK_CHHLTD;
 577
 578         /*
 579          * For Descriptor DMA mode core halts the channel on AHB error.
 580          * Interrupt is not required.
 581          */
 582         if (!hsotg->params.dma_desc_enable) {
 583                 if (dbg_hc(chan))
 584                         dev_vdbg(hsotg->dev, "desc DMA disabled\n");
 585                 hcintmsk |= HCINTMSK_AHBERR;
 586         } else {
 587                 if (dbg_hc(chan))
 588                         dev_vdbg(hsotg->dev, "desc DMA enabled\n");
 589                 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
 590                         hcintmsk |= HCINTMSK_XFERCOMPL;
 591         }
 592
 593         if (chan->error_state && !chan->do_split &&
 594             chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
 595                 if (dbg_hc(chan))
 596                         dev_vdbg(hsotg->dev, "setting ACK\n");
 597                 hcintmsk |= HCINTMSK_ACK;
 598                 if (chan->ep_is_in) {
 599                         hcintmsk |= HCINTMSK_DATATGLERR;
 600                         if (chan->ep_type != USB_ENDPOINT_XFER_INT)
 601                                 hcintmsk |= HCINTMSK_NAK;
 602                 }
 603         }
 604
 605         dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
 606         if (dbg_hc(chan))
 607                 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
 608 }
 609
 610 static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg,
 611                                 struct dwc2_host_chan *chan)
 612 {
 613         u32 intmsk;
 614
 615         if (hsotg->params.host_dma) {
 616                 if (dbg_hc(chan))
 617                         dev_vdbg(hsotg->dev, "DMA enabled\n");
 618                 dwc2_hc_enable_dma_ints(hsotg, chan);
 619         } else {
 620                 if (dbg_hc(chan))
 621                         dev_vdbg(hsotg->dev, "DMA disabled\n");
 622                 dwc2_hc_enable_slave_ints(hsotg, chan);
 623         }
 624
 625         /* Enable the top level host channel interrupt */
 626         intmsk = dwc2_readl(hsotg, HAINTMSK);
 627         intmsk |= 1 << chan->hc_num;
 628         dwc2_writel(hsotg, intmsk, HAINTMSK);
 629         if (dbg_hc(chan))
 630                 dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk);
 631
 632         /* Make sure host channel interrupts are enabled */
 633         intmsk = dwc2_readl(hsotg, GINTMSK);
 634         intmsk |= GINTSTS_HCHINT;
 635         dwc2_writel(hsotg, intmsk, GINTMSK);
 636         if (dbg_hc(chan))
 637                 dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk);
 638 }
 639
 640 /**
 641  * dwc2_hc_init() - Prepares a host channel for transferring packets to/from
 642  * a specific endpoint
 643  *
 644  * @hsotg: Programming view of DWC_otg controller
 645  * @chan:  Information needed to initialize the host channel
 646  *
 647  * The HCCHARn register is set up with the characteristics specified in chan.
 648  * Host channel interrupts that may need to be serviced while this transfer is
 649  * in progress are enabled.
 650  */
 651 static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
 652 {
 653         u8 hc_num = chan->hc_num;
 654         u32 hcintmsk;
 655         u32 hcchar;
 656         u32 hcsplt = 0;
 657
 658         if (dbg_hc(chan))
 659                 dev_vdbg(hsotg->dev, "%s()\n", __func__);
 660
 661         /* Clear old interrupt conditions for this host channel */
 662         hcintmsk = 0xffffffff;
 663         hcintmsk &= ~HCINTMSK_RESERVED14_31;
 664         dwc2_writel(hsotg, hcintmsk, HCINT(hc_num));
 665
 666         /* Enable channel interrupts required for this transfer */
 667         dwc2_hc_enable_ints(hsotg, chan);
 668
 669         /*
 670          * Program the HCCHARn register with the endpoint characteristics for
 671          * the current transfer
 672          */
 673         hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK;
 674         hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK;
 675         if (chan->ep_is_in)
 676                 hcchar |= HCCHAR_EPDIR;
 677         if (chan->speed == USB_SPEED_LOW)
 678                 hcchar |= HCCHAR_LSPDDEV;
 679         hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK;
 680         hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK;
 681         dwc2_writel(hsotg, hcchar, HCCHAR(hc_num));
 682         if (dbg_hc(chan)) {
 683                 dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n",
 684                          hc_num, hcchar);
 685
 686                 dev_vdbg(hsotg->dev, "%s: Channel %d\n",
 687                          __func__, hc_num);
 688                 dev_vdbg(hsotg->dev, "   Dev Addr: %d\n",
 689                          chan->dev_addr);
 690                 dev_vdbg(hsotg->dev, "   Ep Num: %d\n",
 691                          chan->ep_num);
 692                 dev_vdbg(hsotg->dev, "   Is In: %d\n",
 693                          chan->ep_is_in);
 694                 dev_vdbg(hsotg->dev, "   Is Low Speed: %d\n",
 695                          chan->speed == USB_SPEED_LOW);
 696                 dev_vdbg(hsotg->dev, "   Ep Type: %d\n",
 697                          chan->ep_type);
 698                 dev_vdbg(hsotg->dev, "   Max Pkt: %d\n",
 699                          chan->max_packet);
 700         }
 701
 702         /* Program the HCSPLT register for SPLITs */
 703         if (chan->do_split) {
 704                 if (dbg_hc(chan))
 705                         dev_vdbg(hsotg->dev,
 706                                  "Programming HC %d with split --> %s\n",
 707                                  hc_num,
 708                                  chan->complete_split ? "CSPLIT" : "SSPLIT");
 709                 if (chan->complete_split)
 710                         hcsplt |= HCSPLT_COMPSPLT;
 711                 hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT &
 712                           HCSPLT_XACTPOS_MASK;
 713                 hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT &
 714                           HCSPLT_HUBADDR_MASK;
 715                 hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT &
 716                           HCSPLT_PRTADDR_MASK;
 717                 if (dbg_hc(chan)) {
 718                         dev_vdbg(hsotg->dev, "    comp split %d\n",
 719                                  chan->complete_split);
 720                         dev_vdbg(hsotg->dev, "    xact pos %d\n",
 721                                  chan->xact_pos);
 722                         dev_vdbg(hsotg->dev, "    hub addr %d\n",
 723                                  chan->hub_addr);
 724                         dev_vdbg(hsotg->dev, "    hub port %d\n",
 725                                  chan->hub_port);
 726                         dev_vdbg(hsotg->dev, "    is_in %d\n",
 727                                  chan->ep_is_in);
 728                         dev_vdbg(hsotg->dev, "    Max Pkt %d\n",
 729                                  chan->max_packet);
 730                         dev_vdbg(hsotg->dev, "    xferlen %d\n",
 731                                  chan->xfer_len);
 732                 }
 733         }
 734
 735         dwc2_writel(hsotg, hcsplt, HCSPLT(hc_num));
 736 }
 737
 738 /**
 739  * dwc2_hc_halt() - Attempts to halt a host channel
 740  *
 741  * @hsotg:       Controller register interface
 742  * @chan:        Host channel to halt
 743  * @halt_status: Reason for halting the channel
 744  *
 745  * This function should only be called in Slave mode or to abort a transfer in
 746  * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the
 747  * controller halts the channel when the transfer is complete or a condition
 748  * occurs that requires application intervention.
 749  *
 750  * In slave mode, checks for a free request queue entry, then sets the Channel
 751  * Enable and Channel Disable bits of the Host Channel Characteristics
 752  * register of the specified channel to intiate the halt. If there is no free
 753  * request queue entry, sets only the Channel Disable bit of the HCCHARn
 754  * register to flush requests for this channel. In the latter case, sets a
 755  * flag to indicate that the host channel needs to be halted when a request
 756  * queue slot is open.
 757  *
 758  * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
 759  * HCCHARn register. The controller ensures there is space in the request
 760  * queue before submitting the halt request.
 761  *
 762  * Some time may elapse before the core flushes any posted requests for this
 763  * host channel and halts. The Channel Halted interrupt handler completes the
 764  * deactivation of the host channel.
 765  */
 766 void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
 767                   enum dwc2_halt_status halt_status)
 768 {
 769         u32 nptxsts, hptxsts, hcchar;
 770
 771         if (dbg_hc(chan))
 772                 dev_vdbg(hsotg->dev, "%s()\n", __func__);
 773
 774         /*
 775          * In buffer DMA or external DMA mode channel can't be halted
 776          * for non-split periodic channels. At the end of the next
 777          * uframe/frame (in the worst case), the core generates a channel
 778          * halted and disables the channel automatically.
 779          */
 780         if ((hsotg->params.g_dma && !hsotg->params.g_dma_desc) ||
 781             hsotg->hw_params.arch == GHWCFG2_EXT_DMA_ARCH) {
 782                 if (!chan->do_split &&
 783                     (chan->ep_type == USB_ENDPOINT_XFER_ISOC ||
 784                      chan->ep_type == USB_ENDPOINT_XFER_INT)) {
 785                         dev_err(hsotg->dev, "%s() Channel can't be halted\n",
 786                                 __func__);
 787                         return;
 788                 }
 789         }
 790
 791         if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS)
 792                 dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status);
 793
 794         if (halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
 795             halt_status == DWC2_HC_XFER_AHB_ERR) {
 796                 /*
 797                  * Disable all channel interrupts except Ch Halted. The QTD
 798                  * and QH state associated with this transfer has been cleared
 799                  * (in the case of URB_DEQUEUE), so the channel needs to be
 800                  * shut down carefully to prevent crashes.
 801                  */
 802                 u32 hcintmsk = HCINTMSK_CHHLTD;
 803
 804                 dev_vdbg(hsotg->dev, "dequeue/error\n");
 805                 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
 806
 807                 /*
 808                  * Make sure no other interrupts besides halt are currently
 809                  * pending. Handling another interrupt could cause a crash due
 810                  * to the QTD and QH state.
 811                  */
 812                 dwc2_writel(hsotg, ~hcintmsk, HCINT(chan->hc_num));
 813
 814                 /*
 815                  * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
 816                  * even if the channel was already halted for some other
 817                  * reason
 818                  */
 819                 chan->halt_status = halt_status;
 820
 821                 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
 822                 if (!(hcchar & HCCHAR_CHENA)) {
 823                         /*
 824                          * The channel is either already halted or it hasn't
 825                          * started yet. In DMA mode, the transfer may halt if
 826                          * it finishes normally or a condition occurs that
 827                          * requires driver intervention. Don't want to halt
 828                          * the channel again. In either Slave or DMA mode,
 829                          * it's possible that the transfer has been assigned
 830                          * to a channel, but not started yet when an URB is
 831                          * dequeued. Don't want to halt a channel that hasn't
 832                          * started yet.
 833                          */
 834                         return;
 835                 }
 836         }
 837         if (chan->halt_pending) {
 838                 /*
 839                  * A halt has already been issued for this channel. This might
 840                  * happen when a transfer is aborted by a higher level in
 841                  * the stack.
 842                  */
 843                 dev_vdbg(hsotg->dev,
 844                          "*** %s: Channel %d, chan->halt_pending already set ***\n",
 845                          __func__, chan->hc_num);
 846                 return;
 847         }
 848
 849         hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
 850
 851         /* No need to set the bit in DDMA for disabling the channel */
 852         /* TODO check it everywhere channel is disabled */
 853         if (!hsotg->params.dma_desc_enable) {
 854                 if (dbg_hc(chan))
 855                         dev_vdbg(hsotg->dev, "desc DMA disabled\n");
 856                 hcchar |= HCCHAR_CHENA;
 857         } else {
 858                 if (dbg_hc(chan))
 859                         dev_dbg(hsotg->dev, "desc DMA enabled\n");
 860         }
 861         hcchar |= HCCHAR_CHDIS;
 862
 863         if (!hsotg->params.host_dma) {
 864                 if (dbg_hc(chan))
 865                         dev_vdbg(hsotg->dev, "DMA not enabled\n");
 866                 hcchar |= HCCHAR_CHENA;
 867
 868                 /* Check for space in the request queue to issue the halt */
 869                 if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
 870                     chan->ep_type == USB_ENDPOINT_XFER_BULK) {
 871                         dev_vdbg(hsotg->dev, "control/bulk\n");
 872                         nptxsts = dwc2_readl(hsotg, GNPTXSTS);
 873                         if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) {
 874                                 dev_vdbg(hsotg->dev, "Disabling channel\n");
 875                                 hcchar &= ~HCCHAR_CHENA;
 876                         }
 877                 } else {
 878                         if (dbg_perio())
 879                                 dev_vdbg(hsotg->dev, "isoc/intr\n");
 880                         hptxsts = dwc2_readl(hsotg, HPTXSTS);
 881                         if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 ||
 882                             hsotg->queuing_high_bandwidth) {
 883                                 if (dbg_perio())
 884                                         dev_vdbg(hsotg->dev, "Disabling channel\n");
 885                                 hcchar &= ~HCCHAR_CHENA;
 886                         }
 887                 }
 888         } else {
 889                 if (dbg_hc(chan))
 890                         dev_vdbg(hsotg->dev, "DMA enabled\n");
 891         }
 892
 893         dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
 894         chan->halt_status = halt_status;
 895
 896         if (hcchar & HCCHAR_CHENA) {
 897                 if (dbg_hc(chan))
 898                         dev_vdbg(hsotg->dev, "Channel enabled\n");
 899                 chan->halt_pending = 1;
 900                 chan->halt_on_queue = 0;
 901         } else {
 902                 if (dbg_hc(chan))
 903                         dev_vdbg(hsotg->dev, "Channel disabled\n");
 904                 chan->halt_on_queue = 1;
 905         }
 906
 907         if (dbg_hc(chan)) {
 908                 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
 909                          chan->hc_num);
 910                 dev_vdbg(hsotg->dev, "   hcchar: 0x%08x\n",
 911                          hcchar);
 912                 dev_vdbg(hsotg->dev, "   halt_pending: %d\n",
 913                          chan->halt_pending);
 914                 dev_vdbg(hsotg->dev, "   halt_on_queue: %d\n",
 915                          chan->halt_on_queue);
 916                 dev_vdbg(hsotg->dev, "   halt_status: %d\n",
 917                          chan->halt_status);
 918         }
 919 }
 920
 921 /**
 922  * dwc2_hc_cleanup() - Clears the transfer state for a host channel
 923  *
 924  * @hsotg: Programming view of DWC_otg controller
 925  * @chan:  Identifies the host channel to clean up
 926  *
 927  * This function is normally called after a transfer is done and the host
 928  * channel is being released
 929  */
 930 void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
 931 {
 932         u32 hcintmsk;
 933
 934         chan->xfer_started = 0;
 935
 936         list_del_init(&chan->split_order_list_entry);
 937
 938         /*
 939          * Clear channel interrupt enables and any unhandled channel interrupt
 940          * conditions
 941          */
 942         dwc2_writel(hsotg, 0, HCINTMSK(chan->hc_num));
 943         hcintmsk = 0xffffffff;
 944         hcintmsk &= ~HCINTMSK_RESERVED14_31;
 945         dwc2_writel(hsotg, hcintmsk, HCINT(chan->hc_num));
 946 }
 947
 948 /**
 949  * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in
 950  * which frame a periodic transfer should occur
 951  *
 952  * @hsotg:  Programming view of DWC_otg controller
 953  * @chan:   Identifies the host channel to set up and its properties
 954  * @hcchar: Current value of the HCCHAR register for the specified host channel
 955  *
 956  * This function has no effect on non-periodic transfers
 957  */
 958 static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg,
 959                                        struct dwc2_host_chan *chan, u32 *hcchar)
 960 {
 961         if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
 962             chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
 963                 int host_speed;
 964                 int xfer_ns;
 965                 int xfer_us;
 966                 int bytes_in_fifo;
 967                 u16 fifo_space;
 968                 u16 frame_number;
 969                 u16 wire_frame;
 970
 971                 /*
 972                  * Try to figure out if we're an even or odd frame. If we set
 973                  * even and the current frame number is even the transfer
 974                  * will happen immediately.  Similar if both are odd. If one is
 975                  * even and the other is odd then the transfer will happen when
 976                  * the frame number ticks.
 977                  *
 978                  * There's a bit of a balancing act to get this right.
 979                  * Sometimes we may want to send data in the current frame (AK
 980                  * right away).  We might want to do this if the frame number
 981                  * _just_ ticked, but we might also want to do this in order
 982                  * to continue a split transaction that happened late in a
 983                  * microframe (so we didn't know to queue the next transfer
 984                  * until the frame number had ticked).  The problem is that we
 985                  * need a lot of knowledge to know if there's actually still
 986                  * time to send things or if it would be better to wait until
 987                  * the next frame.
 988                  *
 989                  * We can look at how much time is left in the current frame
 990                  * and make a guess about whether we'll have time to transfer.
 991                  * We'll do that.
 992                  */
 993
 994                 /* Get speed host is running at */
 995                 host_speed = (chan->speed != USB_SPEED_HIGH &&
 996                               !chan->do_split) ? chan->speed : USB_SPEED_HIGH;
 997
 998                 /* See how many bytes are in the periodic FIFO right now */
 999                 fifo_space = (dwc2_readl(hsotg, HPTXSTS) &
1000                               TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT;
1001                 bytes_in_fifo = sizeof(u32) *
1002                                 (hsotg->params.host_perio_tx_fifo_size -
1003                                  fifo_space);
1004
1005                 /*
1006                  * Roughly estimate bus time for everything in the periodic
1007                  * queue + our new transfer.  This is "rough" because we're
1008                  * using a function that makes takes into account IN/OUT
1009                  * and INT/ISO and we're just slamming in one value for all
1010                  * transfers.  This should be an over-estimate and that should
1011                  * be OK, but we can probably tighten it.
1012                  */
1013                 xfer_ns = usb_calc_bus_time(host_speed, false, false,
1014                                             chan->xfer_len + bytes_in_fifo);
1015                 xfer_us = NS_TO_US(xfer_ns);
1016
1017                 /* See what frame number we'll be at by the time we finish */
1018                 frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us);
1019
1020                 /* This is when we were scheduled to be on the wire */
1021                 wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1);
1022
1023                 /*
1024                  * If we'd finish _after_ the frame we're scheduled in then
1025                  * it's hopeless.  Just schedule right away and hope for the
1026                  * best.  Note that it _might_ be wise to call back into the
1027                  * scheduler to pick a better frame, but this is better than
1028                  * nothing.
1029                  */
1030                 if (dwc2_frame_num_gt(frame_number, wire_frame)) {
1031                         dwc2_sch_vdbg(hsotg,
1032                                       "QH=%p EO MISS fr=%04x=>%04x (%+d)\n",
1033                                       chan->qh, wire_frame, frame_number,
1034                                       dwc2_frame_num_dec(frame_number,
1035                                                          wire_frame));
1036                         wire_frame = frame_number;
1037
1038                         /*
1039                          * We picked a different frame number; communicate this
1040                          * back to the scheduler so it doesn't try to schedule
1041                          * another in the same frame.
1042                          *
1043                          * Remember that next_active_frame is 1 before the wire
1044                          * frame.
1045                          */
1046                         chan->qh->next_active_frame =
1047                                 dwc2_frame_num_dec(frame_number, 1);
1048                 }
1049
1050                 if (wire_frame & 1)
1051                         *hcchar |= HCCHAR_ODDFRM;
1052                 else
1053                         *hcchar &= ~HCCHAR_ODDFRM;
1054         }
1055 }
1056
1057 static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan)
1058 {
1059         /* Set up the initial PID for the transfer */
1060         if (chan->speed == USB_SPEED_HIGH) {
1061                 if (chan->ep_is_in) {
1062                         if (chan->multi_count == 1)
1063                                 chan->data_pid_start = DWC2_HC_PID_DATA0;
1064                         else if (chan->multi_count == 2)
1065                                 chan->data_pid_start = DWC2_HC_PID_DATA1;
1066                         else
1067                                 chan->data_pid_start = DWC2_HC_PID_DATA2;
1068                 } else {
1069                         if (chan->multi_count == 1)
1070                                 chan->data_pid_start = DWC2_HC_PID_DATA0;
1071                         else
1072                                 chan->data_pid_start = DWC2_HC_PID_MDATA;
1073                 }
1074         } else {
1075                 chan->data_pid_start = DWC2_HC_PID_DATA0;
1076         }
1077 }
1078
1079 /**
1080  * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with
1081  * the Host Channel
1082  *
1083  * @hsotg: Programming view of DWC_otg controller
1084  * @chan:  Information needed to initialize the host channel
1085  *
1086  * This function should only be called in Slave mode. For a channel associated
1087  * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel
1088  * associated with a periodic EP, the periodic Tx FIFO is written.
1089  *
1090  * Upon return the xfer_buf and xfer_count fields in chan are incremented by
1091  * the number of bytes written to the Tx FIFO.
1092  */
1093 static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg,
1094                                  struct dwc2_host_chan *chan)
1095 {
1096         u32 i;
1097         u32 remaining_count;
1098         u32 byte_count;
1099         u32 dword_count;
1100         u32 *data_buf = (u32 *)chan->xfer_buf;
1101
1102         if (dbg_hc(chan))
1103                 dev_vdbg(hsotg->dev, "%s()\n", __func__);
1104
1105         remaining_count = chan->xfer_len - chan->xfer_count;
1106         if (remaining_count > chan->max_packet)
1107                 byte_count = chan->max_packet;
1108         else
1109                 byte_count = remaining_count;
1110
1111         dword_count = (byte_count + 3) / 4;
1112
1113         if (((unsigned long)data_buf & 0x3) == 0) {
1114                 /* xfer_buf is DWORD aligned */
1115                 for (i = 0; i < dword_count; i++, data_buf++)
1116                         dwc2_writel(hsotg, *data_buf, HCFIFO(chan->hc_num));
1117         } else {
1118                 /* xfer_buf is not DWORD aligned */
1119                 for (i = 0; i < dword_count; i++, data_buf++) {
1120                         u32 data = data_buf[0] | data_buf[1] << 8 |
1121                                    data_buf[2] << 16 | data_buf[3] << 24;
1122                         dwc2_writel(hsotg, data, HCFIFO(chan->hc_num));
1123                 }
1124         }
1125
1126         chan->xfer_count += byte_count;
1127         chan->xfer_buf += byte_count;
1128 }
1129
1130 /**
1131  * dwc2_hc_do_ping() - Starts a PING transfer
1132  *
1133  * @hsotg: Programming view of DWC_otg controller
1134  * @chan:  Information needed to initialize the host channel
1135  *
1136  * This function should only be called in Slave mode. The Do Ping bit is set in
1137  * the HCTSIZ register, then the channel is enabled.
1138  */
1139 static void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg,
1140                             struct dwc2_host_chan *chan)
1141 {
1142         u32 hcchar;
1143         u32 hctsiz;
1144
1145         if (dbg_hc(chan))
1146                 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
1147                          chan->hc_num);
1148
1149         hctsiz = TSIZ_DOPNG;
1150         hctsiz |= 1 << TSIZ_PKTCNT_SHIFT;
1151         dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
1152
1153         hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
1154         hcchar |= HCCHAR_CHENA;
1155         hcchar &= ~HCCHAR_CHDIS;
1156         dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
1157 }
1158
1159 /**
1160  * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host
1161  * channel and starts the transfer
1162  *
1163  * @hsotg: Programming view of DWC_otg controller
1164  * @chan:  Information needed to initialize the host channel. The xfer_len value
1165  *         may be reduced to accommodate the max widths of the XferSize and
1166  *         PktCnt fields in the HCTSIZn register. The multi_count value may be
1167  *         changed to reflect the final xfer_len value.
1168  *
1169  * This function may be called in either Slave mode or DMA mode. In Slave mode,
1170  * the caller must ensure that there is sufficient space in the request queue
1171  * and Tx Data FIFO.
1172  *
1173  * For an OUT transfer in Slave mode, it loads a data packet into the
1174  * appropriate FIFO. If necessary, additional data packets are loaded in the
1175  * Host ISR.
1176  *
1177  * For an IN transfer in Slave mode, a data packet is requested. The data
1178  * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
1179  * additional data packets are requested in the Host ISR.
1180  *
1181  * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
1182  * register along with a packet count of 1 and the channel is enabled. This
1183  * causes a single PING transaction to occur. Other fields in HCTSIZ are
1184  * simply set to 0 since no data transfer occurs in this case.
1185  *
1186  * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
1187  * all the information required to perform the subsequent data transfer. In
1188  * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
1189  * controller performs the entire PING protocol, then starts the data
1190  * transfer.
1191  */
1192 static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
1193                                    struct dwc2_host_chan *chan)
1194 {
1195         u32 max_hc_xfer_size = hsotg->params.max_transfer_size;
1196         u16 max_hc_pkt_count = hsotg->params.max_packet_count;
1197         u32 hcchar;
1198         u32 hctsiz = 0;
1199         u16 num_packets;
1200         u32 ec_mc;
1201
1202         if (dbg_hc(chan))
1203                 dev_vdbg(hsotg->dev, "%s()\n", __func__);
1204
1205         if (chan->do_ping) {
1206                 if (!hsotg->params.host_dma) {
1207                         if (dbg_hc(chan))
1208                                 dev_vdbg(hsotg->dev, "ping, no DMA\n");
1209                         dwc2_hc_do_ping(hsotg, chan);
1210                         chan->xfer_started = 1;
1211                         return;
1212                 }
1213
1214                 if (dbg_hc(chan))
1215                         dev_vdbg(hsotg->dev, "ping, DMA\n");
1216
1217                 hctsiz |= TSIZ_DOPNG;
1218         }
1219
1220         if (chan->do_split) {
1221                 if (dbg_hc(chan))
1222                         dev_vdbg(hsotg->dev, "split\n");
1223                 num_packets = 1;
1224
1225                 if (chan->complete_split && !chan->ep_is_in)
1226                         /*
1227                          * For CSPLIT OUT Transfer, set the size to 0 so the
1228                          * core doesn't expect any data written to the FIFO
1229                          */
1230                         chan->xfer_len = 0;
1231                 else if (chan->ep_is_in || chan->xfer_len > chan->max_packet)
1232                         chan->xfer_len = chan->max_packet;
1233                 else if (!chan->ep_is_in && chan->xfer_len > 188)
1234                         chan->xfer_len = 188;
1235
1236                 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
1237                           TSIZ_XFERSIZE_MASK;
1238
1239                 /* For split set ec_mc for immediate retries */
1240                 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1241                     chan->ep_type == USB_ENDPOINT_XFER_ISOC)
1242                         ec_mc = 3;
1243                 else
1244                         ec_mc = 1;
1245         } else {
1246                 if (dbg_hc(chan))
1247                         dev_vdbg(hsotg->dev, "no split\n");
1248                 /*
1249                  * Ensure that the transfer length and packet count will fit
1250                  * in the widths allocated for them in the HCTSIZn register
1251                  */
1252                 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1253                     chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
1254                         /*
1255                          * Make sure the transfer size is no larger than one
1256                          * (micro)frame's worth of data. (A check was done
1257                          * when the periodic transfer was accepted to ensure
1258                          * that a (micro)frame's worth of data can be
1259                          * programmed into a channel.)
1260                          */
1261                         u32 max_periodic_len =
1262                                 chan->multi_count * chan->max_packet;
1263
1264                         if (chan->xfer_len > max_periodic_len)
1265                                 chan->xfer_len = max_periodic_len;
1266                 } else if (chan->xfer_len > max_hc_xfer_size) {
1267                         /*
1268                          * Make sure that xfer_len is a multiple of max packet
1269                          * size
1270                          */
1271                         chan->xfer_len =
1272                                 max_hc_xfer_size - chan->max_packet + 1;
1273                 }
1274
1275                 if (chan->xfer_len > 0) {
1276                         num_packets = (chan->xfer_len + chan->max_packet - 1) /
1277                                         chan->max_packet;
1278                         if (num_packets > max_hc_pkt_count) {
1279                                 num_packets = max_hc_pkt_count;
1280                                 chan->xfer_len = num_packets * chan->max_packet;
1281                         } else if (chan->ep_is_in) {
1282                                 /*
1283                                  * Always program an integral # of max packets
1284                                  * for IN transfers.
1285                                  * Note: This assumes that the input buffer is
1286                                  * aligned and sized accordingly.
1287                                  */
1288                                 chan->xfer_len = num_packets * chan->max_packet;
1289                         }
1290                 } else {
1291                         /* Need 1 packet for transfer length of 0 */
1292                         num_packets = 1;
1293                 }
1294
1295                 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1296                     chan->ep_type == USB_ENDPOINT_XFER_ISOC)
1297                         /*
1298                          * Make sure that the multi_count field matches the
1299                          * actual transfer length
1300                          */
1301                         chan->multi_count = num_packets;
1302
1303                 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
1304                         dwc2_set_pid_isoc(chan);
1305
1306                 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
1307                           TSIZ_XFERSIZE_MASK;
1308
1309                 /* The ec_mc gets the multi_count for non-split */
1310                 ec_mc = chan->multi_count;
1311         }
1312
1313         chan->start_pkt_count = num_packets;
1314         hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK;
1315         hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
1316                   TSIZ_SC_MC_PID_MASK;
1317         dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
1318         if (dbg_hc(chan)) {
1319                 dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n",
1320                          hctsiz, chan->hc_num);
1321
1322                 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
1323                          chan->hc_num);
1324                 dev_vdbg(hsotg->dev, "   Xfer Size: %d\n",
1325                          (hctsiz & TSIZ_XFERSIZE_MASK) >>
1326                          TSIZ_XFERSIZE_SHIFT);
1327                 dev_vdbg(hsotg->dev, "   Num Pkts: %d\n",
1328                          (hctsiz & TSIZ_PKTCNT_MASK) >>
1329                          TSIZ_PKTCNT_SHIFT);
1330                 dev_vdbg(hsotg->dev, "   Start PID: %d\n",
1331                          (hctsiz & TSIZ_SC_MC_PID_MASK) >>
1332                          TSIZ_SC_MC_PID_SHIFT);
1333         }
1334
1335         if (hsotg->params.host_dma) {
1336                 dma_addr_t dma_addr;
1337
1338                 if (chan->align_buf) {
1339                         if (dbg_hc(chan))
1340                                 dev_vdbg(hsotg->dev, "align_buf\n");
1341                         dma_addr = chan->align_buf;
1342                 } else {
1343                         dma_addr = chan->xfer_dma;
1344                 }
1345                 dwc2_writel(hsotg, (u32)dma_addr, HCDMA(chan->hc_num));
1346
1347                 if (dbg_hc(chan))
1348                         dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
1349                                  (unsigned long)dma_addr, chan->hc_num);
1350         }
1351
1352         /* Start the split */
1353         if (chan->do_split) {
1354                 u32 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num));
1355
1356                 hcsplt |= HCSPLT_SPLTENA;
1357                 dwc2_writel(hsotg, hcsplt, HCSPLT(chan->hc_num));
1358         }
1359
1360         hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
1361         hcchar &= ~HCCHAR_MULTICNT_MASK;
1362         hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK;
1363         dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
1364
1365         if (hcchar & HCCHAR_CHDIS)
1366                 dev_warn(hsotg->dev,
1367                          "%s: chdis set, channel %d, hcchar 0x%08x\n",
1368                          __func__, chan->hc_num, hcchar);
1369
1370         /* Set host channel enable after all other setup is complete */
1371         hcchar |= HCCHAR_CHENA;
1372         hcchar &= ~HCCHAR_CHDIS;
1373
1374         if (dbg_hc(chan))
1375                 dev_vdbg(hsotg->dev, "   Multi Cnt: %d\n",
1376                          (hcchar & HCCHAR_MULTICNT_MASK) >>
1377                          HCCHAR_MULTICNT_SHIFT);
1378
1379         dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
1380         if (dbg_hc(chan))
1381                 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
1382                          chan->hc_num);
1383
1384         chan->xfer_started = 1;
1385         chan->requests++;
1386
1387         if (!hsotg->params.host_dma &&
1388             !chan->ep_is_in && chan->xfer_len > 0)
1389                 /* Load OUT packet into the appropriate Tx FIFO */
1390                 dwc2_hc_write_packet(hsotg, chan);
1391 }
1392
1393 /**
1394  * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a
1395  * host channel and starts the transfer in Descriptor DMA mode
1396  *
1397  * @hsotg: Programming view of DWC_otg controller
1398  * @chan:  Information needed to initialize the host channel
1399  *
1400  * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
1401  * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field
1402  * with micro-frame bitmap.
1403  *
1404  * Initializes HCDMA register with descriptor list address and CTD value then
1405  * starts the transfer via enabling the channel.
1406  */
1407 void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
1408                                  struct dwc2_host_chan *chan)
1409 {
1410         u32 hcchar;
1411         u32 hctsiz = 0;
1412
1413         if (chan->do_ping)
1414                 hctsiz |= TSIZ_DOPNG;
1415
1416         if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
1417                 dwc2_set_pid_isoc(chan);
1418
1419         /* Packet Count and Xfer Size are not used in Descriptor DMA mode */
1420         hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
1421                   TSIZ_SC_MC_PID_MASK;
1422
1423         /* 0 - 1 descriptor, 1 - 2 descriptors, etc */
1424         hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK;
1425
1426         /* Non-zero only for high-speed interrupt endpoints */
1427         hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK;
1428
1429         if (dbg_hc(chan)) {
1430                 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
1431                          chan->hc_num);
1432                 dev_vdbg(hsotg->dev, "   Start PID: %d\n",
1433                          chan->data_pid_start);
1434                 dev_vdbg(hsotg->dev, "   NTD: %d\n", chan->ntd - 1);
1435         }
1436
1437         dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
1438
1439         dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr,
1440                                    chan->desc_list_sz, DMA_TO_DEVICE);
1441
1442         dwc2_writel(hsotg, chan->desc_list_addr, HCDMA(chan->hc_num));
1443
1444         if (dbg_hc(chan))
1445                 dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n",
1446                          &chan->desc_list_addr, chan->hc_num);
1447
1448         hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
1449         hcchar &= ~HCCHAR_MULTICNT_MASK;
1450         hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
1451                   HCCHAR_MULTICNT_MASK;
1452
1453         if (hcchar & HCCHAR_CHDIS)
1454                 dev_warn(hsotg->dev,
1455                          "%s: chdis set, channel %d, hcchar 0x%08x\n",
1456                          __func__, chan->hc_num, hcchar);
1457
1458         /* Set host channel enable after all other setup is complete */
1459         hcchar |= HCCHAR_CHENA;
1460         hcchar &= ~HCCHAR_CHDIS;
1461
1462         if (dbg_hc(chan))
1463                 dev_vdbg(hsotg->dev, "   Multi Cnt: %d\n",
1464                          (hcchar & HCCHAR_MULTICNT_MASK) >>
1465                          HCCHAR_MULTICNT_SHIFT);
1466
1467         dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
1468         if (dbg_hc(chan))
1469                 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
1470                          chan->hc_num);
1471
1472         chan->xfer_started = 1;
1473         chan->requests++;
1474 }
1475
1476 /**
1477  * dwc2_hc_continue_transfer() - Continues a data transfer that was started by
1478  * a previous call to dwc2_hc_start_transfer()
1479  *
1480  * @hsotg: Programming view of DWC_otg controller
1481  * @chan:  Information needed to initialize the host channel
1482  *
1483  * The caller must ensure there is sufficient space in the request queue and Tx
1484  * Data FIFO. This function should only be called in Slave mode. In DMA mode,
1485  * the controller acts autonomously to complete transfers programmed to a host
1486  * channel.
1487  *
1488  * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
1489  * if there is any data remaining to be queued. For an IN transfer, another
1490  * data packet is always requested. For the SETUP phase of a control transfer,
1491  * this function does nothing.
1492  *
1493  * Return: 1 if a new request is queued, 0 if no more requests are required
1494  * for this transfer
1495  */
1496 static int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg,
1497                                      struct dwc2_host_chan *chan)
1498 {
1499         if (dbg_hc(chan))
1500                 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
1501                          chan->hc_num);
1502
1503         if (chan->do_split)
1504                 /* SPLITs always queue just once per channel */
1505                 return 0;
1506
1507         if (chan->data_pid_start == DWC2_HC_PID_SETUP)
1508                 /* SETUPs are queued only once since they can't be NAK'd */
1509                 return 0;
1510
1511         if (chan->ep_is_in) {
1512                 /*
1513                  * Always queue another request for other IN transfers. If
1514                  * back-to-back INs are issued and NAKs are received for both,
1515                  * the driver may still be processing the first NAK when the
1516                  * second NAK is received. When the interrupt handler clears
1517                  * the NAK interrupt for the first NAK, the second NAK will
1518                  * not be seen. So we can't depend on the NAK interrupt
1519                  * handler to requeue a NAK'd request. Instead, IN requests
1520                  * are issued each time this function is called. When the
1521                  * transfer completes, the extra requests for the channel will
1522                  * be flushed.
1523                  */
1524                 u32 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
1525
1526                 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
1527                 hcchar |= HCCHAR_CHENA;
1528                 hcchar &= ~HCCHAR_CHDIS;
1529                 if (dbg_hc(chan))
1530                         dev_vdbg(hsotg->dev, "   IN xfer: hcchar = 0x%08x\n",
1531                                  hcchar);
1532                 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
1533                 chan->requests++;
1534                 return 1;
1535         }
1536
1537         /* OUT transfers */
1538
1539         if (chan->xfer_count < chan->xfer_len) {
1540                 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1541                     chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
1542                         u32 hcchar = dwc2_readl(hsotg,
1543                                                 HCCHAR(chan->hc_num));
1544
1545                         dwc2_hc_set_even_odd_frame(hsotg, chan,
1546                                                    &hcchar);
1547                 }
1548
1549                 /* Load OUT packet into the appropriate Tx FIFO */
1550                 dwc2_hc_write_packet(hsotg, chan);
1551                 chan->requests++;
1552                 return 1;
1553         }
1554
1555         return 0;
1556 }
1557
1558 /*
1559  * =========================================================================
1560  *  HCD
1561  * =========================================================================
1562  */
1563
1564 /*
1565  * Processes all the URBs in a single list of QHs. Completes them with
1566  * -ETIMEDOUT and frees the QTD.
1567  *
1568  * Must be called with interrupt disabled and spinlock held
1569  */
1570 static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg,
1571                                       struct list_head *qh_list)
1572 {
1573         struct dwc2_qh *qh, *qh_tmp;
1574         struct dwc2_qtd *qtd, *qtd_tmp;
1575
1576         list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) {
1577                 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
1578                                          qtd_list_entry) {
1579                         dwc2_host_complete(hsotg, qtd, -ECONNRESET);
1580                         dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
1581                 }
1582         }
1583 }
1584
1585 static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg,
1586                               struct list_head *qh_list)
1587 {
1588         struct dwc2_qtd *qtd, *qtd_tmp;
1589         struct dwc2_qh *qh, *qh_tmp;
1590         unsigned long flags;
1591
1592         if (!qh_list->next)
1593                 /* The list hasn't been initialized yet */
1594                 return;
1595
1596         spin_lock_irqsave(&hsotg->lock, flags);
1597
1598         /* Ensure there are no QTDs or URBs left */
1599         dwc2_kill_urbs_in_qh_list(hsotg, qh_list);
1600
1601         list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) {
1602                 dwc2_hcd_qh_unlink(hsotg, qh);
1603
1604                 /* Free each QTD in the QH's QTD list */
1605                 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
1606                                          qtd_list_entry)
1607                         dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
1608
1609                 if (qh->channel && qh->channel->qh == qh)
1610                         qh->channel->qh = NULL;
1611
1612                 spin_unlock_irqrestore(&hsotg->lock, flags);
1613                 dwc2_hcd_qh_free(hsotg, qh);
1614                 spin_lock_irqsave(&hsotg->lock, flags);
1615         }
1616
1617         spin_unlock_irqrestore(&hsotg->lock, flags);
1618 }
1619
1620 /*
1621  * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic
1622  * and periodic schedules. The QTD associated with each URB is removed from
1623  * the schedule and freed. This function may be called when a disconnect is
1624  * detected or when the HCD is being stopped.
1625  *
1626  * Must be called with interrupt disabled and spinlock held
1627  */
1628 static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg)
1629 {
1630         dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive);
1631         dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_waiting);
1632         dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active);
1633         dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive);
1634         dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready);
1635         dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned);
1636         dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued);
1637 }
1638
1639 /**
1640  * dwc2_hcd_start() - Starts the HCD when switching to Host mode
1641  *
1642  * @hsotg: Pointer to struct dwc2_hsotg
1643  */
1644 void dwc2_hcd_start(struct dwc2_hsotg *hsotg)
1645 {
1646         u32 hprt0;
1647
1648         if (hsotg->op_state == OTG_STATE_B_HOST) {
1649                 /*
1650                  * Reset the port. During a HNP mode switch the reset
1651                  * needs to occur within 1ms and have a duration of at
1652                  * least 50ms.
1653                  */
1654                 hprt0 = dwc2_read_hprt0(hsotg);
1655                 hprt0 |= HPRT0_RST;
1656                 dwc2_writel(hsotg, hprt0, HPRT0);
1657         }
1658
1659         queue_delayed_work(hsotg->wq_otg, &hsotg->start_work,
1660                            msecs_to_jiffies(50));
1661 }
1662
1663 /* Must be called with interrupt disabled and spinlock held */
1664 static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg)
1665 {
1666         int num_channels = hsotg->params.host_channels;
1667         struct dwc2_host_chan *channel;
1668         u32 hcchar;
1669         int i;
1670
1671         if (!hsotg->params.host_dma) {
1672                 /* Flush out any channel requests in slave mode */
1673                 for (i = 0; i < num_channels; i++) {
1674                         channel = hsotg->hc_ptr_array[i];
1675                         if (!list_empty(&channel->hc_list_entry))
1676                                 continue;
1677                         hcchar = dwc2_readl(hsotg, HCCHAR(i));
1678                         if (hcchar & HCCHAR_CHENA) {
1679                                 hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR);
1680                                 hcchar |= HCCHAR_CHDIS;
1681                                 dwc2_writel(hsotg, hcchar, HCCHAR(i));
1682                         }
1683                 }
1684         }
1685
1686         for (i = 0; i < num_channels; i++) {
1687                 channel = hsotg->hc_ptr_array[i];
1688                 if (!list_empty(&channel->hc_list_entry))
1689                         continue;
1690                 hcchar = dwc2_readl(hsotg, HCCHAR(i));
1691                 if (hcchar & HCCHAR_CHENA) {
1692                         /* Halt the channel */
1693                         hcchar |= HCCHAR_CHDIS;
1694                         dwc2_writel(hsotg, hcchar, HCCHAR(i));
1695                 }
1696
1697                 dwc2_hc_cleanup(hsotg, channel);
1698                 list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list);
1699                 /*
1700                  * Added for Descriptor DMA to prevent channel double cleanup in
1701                  * release_channel_ddma(), which is called from ep_disable when
1702                  * device disconnects
1703                  */
1704                 channel->qh = NULL;
1705         }
1706         /* All channels have been freed, mark them available */
1707         if (hsotg->params.uframe_sched) {
1708                 hsotg->available_host_channels =
1709                         hsotg->params.host_channels;
1710         } else {
1711                 hsotg->non_periodic_channels = 0;
1712                 hsotg->periodic_channels = 0;
1713         }
1714 }
1715
1716 /**
1717  * dwc2_hcd_connect() - Handles connect of the HCD
1718  *
1719  * @hsotg: Pointer to struct dwc2_hsotg
1720  *
1721  * Must be called with interrupt disabled and spinlock held
1722  */
1723 void dwc2_hcd_connect(struct dwc2_hsotg *hsotg)
1724 {
1725         if (hsotg->lx_state != DWC2_L0)
1726                 usb_hcd_resume_root_hub(hsotg->priv);
1727
1728         hsotg->flags.b.port_connect_status_change = 1;
1729         hsotg->flags.b.port_connect_status = 1;
1730 }
1731
1732 /**
1733  * dwc2_hcd_disconnect() - Handles disconnect of the HCD
1734  *
1735  * @hsotg: Pointer to struct dwc2_hsotg
1736  * @force: If true, we won't try to reconnect even if we see device connected.
1737  *
1738  * Must be called with interrupt disabled and spinlock held
1739  */
1740 void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force)
1741 {
1742         u32 intr;
1743         u32 hprt0;
1744
1745         /* Set status flags for the hub driver */
1746         hsotg->flags.b.port_connect_status_change = 1;
1747         hsotg->flags.b.port_connect_status = 0;
1748
1749         /*
1750          * Shutdown any transfers in process by clearing the Tx FIFO Empty
1751          * interrupt mask and status bits and disabling subsequent host
1752          * channel interrupts.
1753          */
1754         intr = dwc2_readl(hsotg, GINTMSK);
1755         intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT);
1756         dwc2_writel(hsotg, intr, GINTMSK);
1757         intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT;
1758         dwc2_writel(hsotg, intr, GINTSTS);
1759
1760         /*
1761          * Turn off the vbus power only if the core has transitioned to device
1762          * mode. If still in host mode, need to keep power on to detect a
1763          * reconnection.
1764          */
1765         if (dwc2_is_device_mode(hsotg)) {
1766                 if (hsotg->op_state != OTG_STATE_A_SUSPEND) {
1767                         dev_dbg(hsotg->dev, "Disconnect: PortPower off\n");
1768                         dwc2_writel(hsotg, 0, HPRT0);
1769                 }
1770
1771                 dwc2_disable_host_interrupts(hsotg);
1772         }
1773
1774         /* Respond with an error status to all URBs in the schedule */
1775         dwc2_kill_all_urbs(hsotg);
1776
1777         if (dwc2_is_host_mode(hsotg))
1778                 /* Clean up any host channels that were in use */
1779                 dwc2_hcd_cleanup_channels(hsotg);
1780
1781         dwc2_host_disconnect(hsotg);
1782
1783         /*
1784          * Add an extra check here to see if we're actually connected but
1785          * we don't have a detection interrupt pending.  This can happen if:
1786          *   1. hardware sees connect
1787          *   2. hardware sees disconnect
1788          *   3. hardware sees connect
1789          *   4. dwc2_port_intr() - clears connect interrupt
1790          *   5. dwc2_handle_common_intr() - calls here
1791          *
1792          * Without the extra check here we will end calling disconnect
1793          * and won't get any future interrupts to handle the connect.
1794          */
1795         if (!force) {
1796                 hprt0 = dwc2_readl(hsotg, HPRT0);
1797                 if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS))
1798                         dwc2_hcd_connect(hsotg);
1799         }
1800 }
1801
1802 /**
1803  * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup
1804  *
1805  * @hsotg: Pointer to struct dwc2_hsotg
1806  */
1807 static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg)
1808 {
1809         if (hsotg->bus_suspended) {
1810                 hsotg->flags.b.port_suspend_change = 1;
1811                 usb_hcd_resume_root_hub(hsotg->priv);
1812         }
1813
1814         if (hsotg->lx_state == DWC2_L1)
1815                 hsotg->flags.b.port_l1_change = 1;
1816 }
1817
1818 /**
1819  * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner
1820  *
1821  * @hsotg: Pointer to struct dwc2_hsotg
1822  *
1823  * Must be called with interrupt disabled and spinlock held
1824  */
1825 void dwc2_hcd_stop(struct dwc2_hsotg *hsotg)
1826 {
1827         dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n");
1828
1829         /*
1830          * The root hub should be disconnected before this function is called.
1831          * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
1832          * and the QH lists (via ..._hcd_endpoint_disable).
1833          */
1834
1835         /* Turn off all host-specific interrupts */
1836         dwc2_disable_host_interrupts(hsotg);
1837
1838         /* Turn off the vbus power */
1839         dev_dbg(hsotg->dev, "PortPower off\n");
1840         dwc2_writel(hsotg, 0, HPRT0);
1841 }
1842
1843 /* Caller must hold driver lock */
1844 static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg,
1845                                 struct dwc2_hcd_urb *urb, struct dwc2_qh *qh,
1846                                 struct dwc2_qtd *qtd)
1847 {
1848         u32 intr_mask;
1849         int retval;
1850         int dev_speed;
1851
1852         if (!hsotg->flags.b.port_connect_status) {
1853                 /* No longer connected */
1854                 dev_err(hsotg->dev, "Not connected\n");
1855                 return -ENODEV;
1856         }
1857
1858         dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
1859
1860         /* Some configurations cannot support LS traffic on a FS root port */
1861         if ((dev_speed == USB_SPEED_LOW) &&
1862             (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) &&
1863             (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) {
1864                 u32 hprt0 = dwc2_readl(hsotg, HPRT0);
1865                 u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
1866
1867                 if (prtspd == HPRT0_SPD_FULL_SPEED)
1868                         return -ENODEV;
1869         }
1870
1871         if (!qtd)
1872                 return -EINVAL;
1873
1874         dwc2_hcd_qtd_init(qtd, urb);
1875         retval = dwc2_hcd_qtd_add(hsotg, qtd, qh);
1876         if (retval) {
1877                 dev_err(hsotg->dev,
1878                         "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n",
1879                         retval);
1880                 return retval;
1881         }
1882
1883         intr_mask = dwc2_readl(hsotg, GINTMSK);
1884         if (!(intr_mask & GINTSTS_SOF)) {
1885                 enum dwc2_transaction_type tr_type;
1886
1887                 if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK &&
1888                     !(qtd->urb->flags & URB_GIVEBACK_ASAP))
1889                         /*
1890                          * Do not schedule SG transactions until qtd has
1891                          * URB_GIVEBACK_ASAP set
1892                          */
1893                         return 0;
1894
1895                 tr_type = dwc2_hcd_select_transactions(hsotg);
1896                 if (tr_type != DWC2_TRANSACTION_NONE)
1897                         dwc2_hcd_queue_transactions(hsotg, tr_type);
1898         }
1899
1900         return 0;
1901 }
1902
1903 /* Must be called with interrupt disabled and spinlock held */
1904 static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg,
1905                                 struct dwc2_hcd_urb *urb)
1906 {
1907         struct dwc2_qh *qh;
1908         struct dwc2_qtd *urb_qtd;
1909
1910         urb_qtd = urb->qtd;
1911         if (!urb_qtd) {
1912                 dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n");
1913                 return -EINVAL;
1914         }
1915
1916         qh = urb_qtd->qh;
1917         if (!qh) {
1918                 dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n");
1919                 return -EINVAL;
1920         }
1921
1922         urb->priv = NULL;
1923
1924         if (urb_qtd->in_process && qh->channel) {
1925                 dwc2_dump_channel_info(hsotg, qh->channel);
1926
1927                 /* The QTD is in process (it has been assigned to a channel) */
1928                 if (hsotg->flags.b.port_connect_status)
1929                         /*
1930                          * If still connected (i.e. in host mode), halt the
1931                          * channel so it can be used for other transfers. If
1932                          * no longer connected, the host registers can't be
1933                          * written to halt the channel since the core is in
1934                          * device mode.
1935                          */
1936                         dwc2_hc_halt(hsotg, qh->channel,
1937                                      DWC2_HC_XFER_URB_DEQUEUE);
1938         }
1939
1940         /*
1941          * Free the QTD and clean up the associated QH. Leave the QH in the
1942          * schedule if it has any remaining QTDs.
1943          */
1944         if (!hsotg->params.dma_desc_enable) {
1945                 u8 in_process = urb_qtd->in_process;
1946
1947                 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh);
1948                 if (in_process) {
1949                         dwc2_hcd_qh_deactivate(hsotg, qh, 0);
1950                         qh->channel = NULL;
1951                 } else if (list_empty(&qh->qtd_list)) {
1952                         dwc2_hcd_qh_unlink(hsotg, qh);
1953                 }
1954         } else {
1955                 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh);
1956         }
1957
1958         return 0;
1959 }
1960
1961 /* Must NOT be called with interrupt disabled or spinlock held */
1962 static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg,
1963                                      struct usb_host_endpoint *ep, int retry)
1964 {
1965         struct dwc2_qtd *qtd, *qtd_tmp;
1966         struct dwc2_qh *qh;
1967         unsigned long flags;
1968         int rc;
1969
1970         spin_lock_irqsave(&hsotg->lock, flags);
1971
1972         qh = ep->hcpriv;
1973         if (!qh) {
1974                 rc = -EINVAL;
1975                 goto err;
1976         }
1977
1978         while (!list_empty(&qh->qtd_list) && retry--) {
1979                 if (retry == 0) {
1980                         dev_err(hsotg->dev,
1981                                 "## timeout in dwc2_hcd_endpoint_disable() ##\n");
1982                         rc = -EBUSY;
1983                         goto err;
1984                 }
1985
1986                 spin_unlock_irqrestore(&hsotg->lock, flags);
1987                 msleep(20);
1988                 spin_lock_irqsave(&hsotg->lock, flags);
1989                 qh = ep->hcpriv;
1990                 if (!qh) {
1991                         rc = -EINVAL;
1992                         goto err;
1993                 }
1994         }
1995
1996         dwc2_hcd_qh_unlink(hsotg, qh);
1997
1998         /* Free each QTD in the QH's QTD list */
1999         list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry)
2000                 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
2001
2002         ep->hcpriv = NULL;
2003
2004         if (qh->channel && qh->channel->qh == qh)
2005                 qh->channel->qh = NULL;
2006
2007         spin_unlock_irqrestore(&hsotg->lock, flags);
2008
2009         dwc2_hcd_qh_free(hsotg, qh);
2010
2011         return 0;
2012
2013 err:
2014         ep->hcpriv = NULL;
2015         spin_unlock_irqrestore(&hsotg->lock, flags);
2016
2017         return rc;
2018 }
2019
2020 /* Must be called with interrupt disabled and spinlock held */
2021 static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg,
2022                                    struct usb_host_endpoint *ep)
2023 {
2024         struct dwc2_qh *qh = ep->hcpriv;
2025
2026         if (!qh)
2027                 return -EINVAL;
2028
2029         qh->data_toggle = DWC2_HC_PID_DATA0;
2030
2031         return 0;
2032 }
2033
2034 /**
2035  * dwc2_core_init() - Initializes the DWC_otg controller registers and
2036  * prepares the core for device mode or host mode operation
2037  *
2038  * @hsotg:         Programming view of the DWC_otg controller
2039  * @initial_setup: If true then this is the first init for this instance.
2040  */
2041 int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
2042 {
2043         u32 usbcfg, otgctl;
2044         int retval;
2045
2046         dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
2047
2048         usbcfg = dwc2_readl(hsotg, GUSBCFG);
2049
2050         /* Set ULPI External VBUS bit if needed */
2051         usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
2052         if (hsotg->params.phy_ulpi_ext_vbus)
2053                 usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV;
2054
2055         /* Set external TS Dline pulsing bit if needed */
2056         usbcfg &= ~GUSBCFG_TERMSELDLPULSE;
2057         if (hsotg->params.ts_dline)
2058                 usbcfg |= GUSBCFG_TERMSELDLPULSE;
2059
2060         dwc2_writel(hsotg, usbcfg, GUSBCFG);
2061
2062         /*
2063          * Reset the Controller
2064          *
2065          * We only need to reset the controller if this is a re-init.
2066          * For the first init we know for sure that earlier code reset us (it
2067          * needed to in order to properly detect various parameters).
2068          */
2069         if (!initial_setup) {
2070                 retval = dwc2_core_reset(hsotg, false);
2071                 if (retval) {
2072                         dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
2073                                 __func__);
2074                         return retval;
2075                 }
2076         }
2077
2078         /*
2079          * This needs to happen in FS mode before any other programming occurs
2080          */
2081         retval = dwc2_phy_init(hsotg, initial_setup);
2082         if (retval)
2083                 return retval;
2084
2085         /* Program the GAHBCFG Register */
2086         retval = dwc2_gahbcfg_init(hsotg);
2087         if (retval)
2088                 return retval;
2089
2090         /* Program the GUSBCFG register */
2091         dwc2_gusbcfg_init(hsotg);
2092
2093         /* Program the GOTGCTL register */
2094         otgctl = dwc2_readl(hsotg, GOTGCTL);
2095         otgctl &= ~GOTGCTL_OTGVER;
2096         dwc2_writel(hsotg, otgctl, GOTGCTL);
2097
2098         /* Clear the SRP success bit for FS-I2c */
2099         hsotg->srp_success = 0;
2100
2101         /* Enable common interrupts */
2102         dwc2_enable_common_interrupts(hsotg);
2103
2104         /*
2105          * Do device or host initialization based on mode during PCD and
2106          * HCD initialization
2107          */
2108         if (dwc2_is_host_mode(hsotg)) {
2109                 dev_dbg(hsotg->dev, "Host Mode\n");
2110                 hsotg->op_state = OTG_STATE_A_HOST;
2111         } else {
2112                 dev_dbg(hsotg->dev, "Device Mode\n");
2113                 hsotg->op_state = OTG_STATE_B_PERIPHERAL;
2114         }
2115
2116         return 0;
2117 }
2118
2119 /**
2120  * dwc2_core_host_init() - Initializes the DWC_otg controller registers for
2121  * Host mode
2122  *
2123  * @hsotg: Programming view of DWC_otg controller
2124  *
2125  * This function flushes the Tx and Rx FIFOs and flushes any entries in the
2126  * request queues. Host channels are reset to ensure that they are ready for
2127  * performing transfers.
2128  */
2129 static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
2130 {
2131         u32 hcfg, hfir, otgctl, usbcfg;
2132
2133         dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
2134
2135         /* Set HS/FS Timeout Calibration to 7 (max available value).
2136          * The number of PHY clocks that the application programs in
2137          * this field is added to the high/full speed interpacket timeout
2138          * duration in the core to account for any additional delays
2139          * introduced by the PHY. This can be required, because the delay
2140          * introduced by the PHY in generating the linestate condition
2141          * can vary from one PHY to another.
2142          */
2143         usbcfg = dwc2_readl(hsotg, GUSBCFG);
2144         usbcfg |= GUSBCFG_TOUTCAL(7);
2145         dwc2_writel(hsotg, usbcfg, GUSBCFG);
2146
2147         /* Restart the Phy Clock */
2148         dwc2_writel(hsotg, 0, PCGCTL);
2149
2150         /* Initialize Host Configuration Register */
2151         dwc2_init_fs_ls_pclk_sel(hsotg);
2152         if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
2153             hsotg->params.speed == DWC2_SPEED_PARAM_LOW) {
2154                 hcfg = dwc2_readl(hsotg, HCFG);
2155                 hcfg |= HCFG_FSLSSUPP;
2156                 dwc2_writel(hsotg, hcfg, HCFG);
2157         }
2158
2159         /*
2160          * This bit allows dynamic reloading of the HFIR register during
2161          * runtime. This bit needs to be programmed during initial configuration
2162          * and its value must not be changed during runtime.
2163          */
2164         if (hsotg->params.reload_ctl) {
2165                 hfir = dwc2_readl(hsotg, HFIR);
2166                 hfir |= HFIR_RLDCTRL;
2167                 dwc2_writel(hsotg, hfir, HFIR);
2168         }
2169
2170         if (hsotg->params.dma_desc_enable) {
2171                 u32 op_mode = hsotg->hw_params.op_mode;
2172
2173                 if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a ||
2174                     !hsotg->hw_params.dma_desc_enable ||
2175                     op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
2176                     op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
2177                     op_mode == GHWCFG2_OP_MODE_UNDEFINED) {
2178                         dev_err(hsotg->dev,
2179                                 "Hardware does not support descriptor DMA mode -\n");
2180                         dev_err(hsotg->dev,
2181                                 "falling back to buffer DMA mode.\n");
2182                         hsotg->params.dma_desc_enable = false;
2183                 } else {
2184                         hcfg = dwc2_readl(hsotg, HCFG);
2185                         hcfg |= HCFG_DESCDMA;
2186                         dwc2_writel(hsotg, hcfg, HCFG);
2187                 }
2188         }
2189
2190         /* Configure data FIFO sizes */
2191         dwc2_config_fifos(hsotg);
2192
2193         /* TODO - check this */
2194         /* Clear Host Set HNP Enable in the OTG Control Register */
2195         otgctl = dwc2_readl(hsotg, GOTGCTL);
2196         otgctl &= ~GOTGCTL_HSTSETHNPEN;
2197         dwc2_writel(hsotg, otgctl, GOTGCTL);
2198
2199         /* Make sure the FIFOs are flushed */
2200         dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */);
2201         dwc2_flush_rx_fifo(hsotg);
2202
2203         /* Clear Host Set HNP Enable in the OTG Control Register */
2204         otgctl = dwc2_readl(hsotg, GOTGCTL);
2205         otgctl &= ~GOTGCTL_HSTSETHNPEN;
2206         dwc2_writel(hsotg, otgctl, GOTGCTL);
2207
2208         if (!hsotg->params.dma_desc_enable) {
2209                 int num_channels, i;
2210                 u32 hcchar;
2211
2212                 /* Flush out any leftover queued requests */
2213                 num_channels = hsotg->params.host_channels;
2214                 for (i = 0; i < num_channels; i++) {
2215                         hcchar = dwc2_readl(hsotg, HCCHAR(i));
2216                         if (hcchar & HCCHAR_CHENA) {
2217                                 hcchar &= ~HCCHAR_CHENA;
2218                                 hcchar |= HCCHAR_CHDIS;
2219                                 hcchar &= ~HCCHAR_EPDIR;
2220                                 dwc2_writel(hsotg, hcchar, HCCHAR(i));
2221                         }
2222                 }
2223
2224                 /* Halt all channels to put them into a known state */
2225                 for (i = 0; i < num_channels; i++) {
2226                         hcchar = dwc2_readl(hsotg, HCCHAR(i));
2227                         if (hcchar & HCCHAR_CHENA) {
2228                                 hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
2229                                 hcchar &= ~HCCHAR_EPDIR;
2230                                 dwc2_writel(hsotg, hcchar, HCCHAR(i));
2231                                 dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
2232                                         __func__, i);
2233
2234                                 if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i),
2235                                                               HCCHAR_CHENA,
2236                                                               1000)) {
2237                                         dev_warn(hsotg->dev,
2238                                                  "Unable to clear enable on channel %d\n",
2239                                                  i);
2240                                 }
2241                         }
2242                 }
2243         }
2244
2245         /* Enable ACG feature in host mode, if supported */
2246         dwc2_enable_acg(hsotg);
2247
2248         /* Turn on the vbus power */
2249         dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state);
2250         if (hsotg->op_state == OTG_STATE_A_HOST) {
2251                 u32 hprt0 = dwc2_read_hprt0(hsotg);
2252
2253                 dev_dbg(hsotg->dev, "Init: Power Port (%d)\n",
2254                         !!(hprt0 & HPRT0_PWR));
2255                 if (!(hprt0 & HPRT0_PWR)) {
2256                         hprt0 |= HPRT0_PWR;
2257                         dwc2_writel(hsotg, hprt0, HPRT0);
2258                 }
2259         }
2260
2261         dwc2_enable_host_interrupts(hsotg);
2262 }
2263
2264 /*
2265  * Initializes dynamic portions of the DWC_otg HCD state
2266  *
2267  * Must be called with interrupt disabled and spinlock held
2268  */
2269 static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg)
2270 {
2271         struct dwc2_host_chan *chan, *chan_tmp;
2272         int num_channels;
2273         int i;
2274
2275         hsotg->flags.d32 = 0;
2276         hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active;
2277
2278         if (hsotg->params.uframe_sched) {
2279                 hsotg->available_host_channels =
2280                         hsotg->params.host_channels;
2281         } else {
2282                 hsotg->non_periodic_channels = 0;
2283                 hsotg->periodic_channels = 0;
2284         }
2285
2286         /*
2287          * Put all channels in the free channel list and clean up channel
2288          * states
2289          */
2290         list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list,
2291                                  hc_list_entry)
2292                 list_del_init(&chan->hc_list_entry);
2293
2294         num_channels = hsotg->params.host_channels;
2295         for (i = 0; i < num_channels; i++) {
2296                 chan = hsotg->hc_ptr_array[i];
2297                 list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
2298                 dwc2_hc_cleanup(hsotg, chan);
2299         }
2300
2301         /* Initialize the DWC core for host mode operation */
2302         dwc2_core_host_init(hsotg);
2303 }
2304
2305 static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg,
2306                                struct dwc2_host_chan *chan,
2307                                struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb)
2308 {
2309         int hub_addr, hub_port;
2310
2311         chan->do_split = 1;
2312         chan->xact_pos = qtd->isoc_split_pos;
2313         chan->complete_split = qtd->complete_split;
2314         dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
2315         chan->hub_addr = (u8)hub_addr;
2316         chan->hub_port = (u8)hub_port;
2317 }
2318
2319 static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg,
2320                               struct dwc2_host_chan *chan,
2321                               struct dwc2_qtd *qtd)
2322 {
2323         struct dwc2_hcd_urb *urb = qtd->urb;
2324         struct dwc2_hcd_iso_packet_desc *frame_desc;
2325
2326         switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) {
2327         case USB_ENDPOINT_XFER_CONTROL:
2328                 chan->ep_type = USB_ENDPOINT_XFER_CONTROL;
2329
2330                 switch (qtd->control_phase) {
2331                 case DWC2_CONTROL_SETUP:
2332                         dev_vdbg(hsotg->dev, "  Control setup transaction\n");
2333                         chan->do_ping = 0;
2334                         chan->ep_is_in = 0;
2335                         chan->data_pid_start = DWC2_HC_PID_SETUP;
2336                         if (hsotg->params.host_dma)
2337                                 chan->xfer_dma = urb->setup_dma;
2338                         else
2339                                 chan->xfer_buf = urb->setup_packet;
2340                         chan->xfer_len = 8;
2341                         break;
2342
2343                 case DWC2_CONTROL_DATA:
2344                         dev_vdbg(hsotg->dev, "  Control data transaction\n");
2345                         chan->data_pid_start = qtd->data_toggle;
2346                         break;
2347
2348                 case DWC2_CONTROL_STATUS:
2349                         /*
2350                          * Direction is opposite of data direction or IN if no
2351                          * data
2352                          */
2353                         dev_vdbg(hsotg->dev, "  Control status transaction\n");
2354                         if (urb->length == 0)
2355                                 chan->ep_is_in = 1;
2356                         else
2357                                 chan->ep_is_in =
2358                                         dwc2_hcd_is_pipe_out(&urb->pipe_info);
2359                         if (chan->ep_is_in)
2360                                 chan->do_ping = 0;
2361                         chan->data_pid_start = DWC2_HC_PID_DATA1;
2362                         chan->xfer_len = 0;
2363                         if (hsotg->params.host_dma)
2364                                 chan->xfer_dma = hsotg->status_buf_dma;
2365                         else
2366                                 chan->xfer_buf = hsotg->status_buf;
2367                         break;
2368                 }
2369                 break;
2370
2371         case USB_ENDPOINT_XFER_BULK:
2372                 chan->ep_type = USB_ENDPOINT_XFER_BULK;
2373                 break;
2374
2375         case USB_ENDPOINT_XFER_INT:
2376                 chan->ep_type = USB_ENDPOINT_XFER_INT;
2377                 break;
2378
2379         case USB_ENDPOINT_XFER_ISOC:
2380                 chan->ep_type = USB_ENDPOINT_XFER_ISOC;
2381                 if (hsotg->params.dma_desc_enable)
2382                         break;
2383
2384                 frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
2385                 frame_desc->status = 0;
2386
2387                 if (hsotg->params.host_dma) {
2388                         chan->xfer_dma = urb->dma;
2389                         chan->xfer_dma += frame_desc->offset +
2390                                         qtd->isoc_split_offset;
2391                 } else {
2392                         chan->xfer_buf = urb->buf;
2393                         chan->xfer_buf += frame_desc->offset +
2394                                         qtd->isoc_split_offset;
2395                 }
2396
2397                 chan->xfer_len = frame_desc->length - qtd->isoc_split_offset;
2398
2399                 if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) {
2400                         if (chan->xfer_len <= 188)
2401                                 chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL;
2402                         else
2403                                 chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN;
2404                 }
2405                 break;
2406         }
2407 }
2408
2409 static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg,
2410                                             struct dwc2_qh *qh,
2411                                             struct dwc2_host_chan *chan)
2412 {
2413         if (!hsotg->unaligned_cache ||
2414             chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE)
2415                 return -ENOMEM;
2416
2417         if (!qh->dw_align_buf) {
2418                 qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache,
2419                                                     GFP_ATOMIC | GFP_DMA);
2420                 if (!qh->dw_align_buf)
2421                         return -ENOMEM;
2422         }
2423
2424         qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf,
2425                                               DWC2_KMEM_UNALIGNED_BUF_SIZE,
2426                                               DMA_FROM_DEVICE);
2427
2428         if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) {
2429                 dev_err(hsotg->dev, "can't map align_buf\n");
2430                 chan->align_buf = 0;
2431                 return -EINVAL;
2432         }
2433
2434         chan->align_buf = qh->dw_align_buf_dma;
2435         return 0;
2436 }
2437
2438 #define DWC2_USB_DMA_ALIGN 4
2439
2440 static void dwc2_free_dma_aligned_buffer(struct urb *urb)
2441 {
2442         void *stored_xfer_buffer;
2443         size_t length;
2444
2445         if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
2446                 return;
2447
2448         /* Restore urb->transfer_buffer from the end of the allocated area */
2449         memcpy(&stored_xfer_buffer,
2450                PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length,
2451                          dma_get_cache_alignment()),
2452                sizeof(urb->transfer_buffer));
2453
2454         if (usb_urb_dir_in(urb)) {
2455                 if (usb_pipeisoc(urb->pipe))
2456                         length = urb->transfer_buffer_length;
2457                 else
2458                         length = urb->actual_length;
2459
2460                 memcpy(stored_xfer_buffer, urb->transfer_buffer, length);
2461         }
2462         kfree(urb->transfer_buffer);
2463         urb->transfer_buffer = stored_xfer_buffer;
2464
2465         urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
2466 }
2467
2468 static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
2469 {
2470         void *kmalloc_ptr;
2471         size_t kmalloc_size;
2472
2473         if (urb->num_sgs || urb->sg ||
2474             urb->transfer_buffer_length == 0 ||
2475             !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1)))
2476                 return 0;
2477
2478         /*
2479          * Allocate a buffer with enough padding for original transfer_buffer
2480          * pointer. This allocation is guaranteed to be aligned properly for
2481          * DMA
2482          */
2483         kmalloc_size = urb->transfer_buffer_length +
2484                 (dma_get_cache_alignment() - 1) +
2485                 sizeof(urb->transfer_buffer);
2486
2487         kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
2488         if (!kmalloc_ptr)
2489                 return -ENOMEM;
2490
2491         /*
2492          * Position value of original urb->transfer_buffer pointer to the end
2493          * of allocation for later referencing
2494          */
2495         memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length,
2496                          dma_get_cache_alignment()),
2497                &urb->transfer_buffer, sizeof(urb->transfer_buffer));
2498
2499         if (usb_urb_dir_out(urb))
2500                 memcpy(kmalloc_ptr, urb->transfer_buffer,
2501                        urb->transfer_buffer_length);
2502         urb->transfer_buffer = kmalloc_ptr;
2503
2504         urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
2505
2506         return 0;
2507 }
2508
2509 static int dwc2_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
2510                                 gfp_t mem_flags)
2511 {
2512         int ret;
2513
2514         /* We assume setup_dma is always aligned; warn if not */
2515         WARN_ON_ONCE(urb->setup_dma &&
2516                      (urb->setup_dma & (DWC2_USB_DMA_ALIGN - 1)));
2517
2518         ret = dwc2_alloc_dma_aligned_buffer(urb, mem_flags);
2519         if (ret)
2520                 return ret;
2521
2522         ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
2523         if (ret)
2524                 dwc2_free_dma_aligned_buffer(urb);
2525
2526         return ret;
2527 }
2528
2529 static void dwc2_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
2530 {
2531         usb_hcd_unmap_urb_for_dma(hcd, urb);
2532         dwc2_free_dma_aligned_buffer(urb);
2533 }
2534
2535 /**
2536  * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host
2537  * channel and initializes the host channel to perform the transactions. The
2538  * host channel is removed from the free list.
2539  *
2540  * @hsotg: The HCD state structure
2541  * @qh:    Transactions from the first QTD for this QH are selected and assigned
2542  *         to a free host channel
2543  */
2544 static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
2545 {
2546         struct dwc2_host_chan *chan;
2547         struct dwc2_hcd_urb *urb;
2548         struct dwc2_qtd *qtd;
2549
2550         if (dbg_qh(qh))
2551                 dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh);
2552
2553         if (list_empty(&qh->qtd_list)) {
2554                 dev_dbg(hsotg->dev, "No QTDs in QH list\n");
2555                 return -ENOMEM;
2556         }
2557
2558         if (list_empty(&hsotg->free_hc_list)) {
2559                 dev_dbg(hsotg->dev, "No free channel to assign\n");
2560                 return -ENOMEM;
2561         }
2562
2563         chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan,
2564                                 hc_list_entry);
2565
2566         /* Remove host channel from free list */
2567         list_del_init(&chan->hc_list_entry);
2568
2569         qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
2570         urb = qtd->urb;
2571         qh->channel = chan;
2572         qtd->in_process = 1;
2573
2574         /*
2575          * Use usb_pipedevice to determine device address. This address is
2576          * 0 before the SET_ADDRESS command and the correct address afterward.
2577          */
2578         chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info);
2579         chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info);
2580         chan->speed = qh->dev_speed;
2581         chan->max_packet = qh->maxp;
2582
2583         chan->xfer_started = 0;
2584         chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
2585         chan->error_state = (qtd->error_count > 0);
2586         chan->halt_on_queue = 0;
2587         chan->halt_pending = 0;
2588         chan->requests = 0;
2589
2590         /*
2591          * The following values may be modified in the transfer type section
2592          * below. The xfer_len value may be reduced when the transfer is
2593          * started to accommodate the max widths of the XferSize and PktCnt
2594          * fields in the HCTSIZn register.
2595          */
2596
2597         chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0);
2598         if (chan->ep_is_in)
2599                 chan->do_ping = 0;
2600         else
2601                 chan->do_ping = qh->ping_state;
2602
2603         chan->data_pid_start = qh->data_toggle;
2604         chan->multi_count = 1;
2605
2606         if (urb->actual_length > urb->length &&
2607             !dwc2_hcd_is_pipe_in(&urb->pipe_info))
2608                 urb->actual_length = urb->length;
2609
2610         if (hsotg->params.host_dma)
2611                 chan->xfer_dma = urb->dma + urb->actual_length;
2612         else
2613                 chan->xfer_buf = (u8 *)urb->buf + urb->actual_length;
2614
2615         chan->xfer_len = urb->length - urb->actual_length;
2616         chan->xfer_count = 0;
2617
2618         /* Set the split attributes if required */
2619         if (qh->do_split)
2620                 dwc2_hc_init_split(hsotg, chan, qtd, urb);
2621         else
2622                 chan->do_split = 0;
2623
2624         /* Set the transfer attributes */
2625         dwc2_hc_init_xfer(hsotg, chan, qtd);
2626
2627         /* For non-dword aligned buffers */
2628         if (hsotg->params.host_dma && qh->do_split &&
2629             chan->ep_is_in && (chan->xfer_dma & 0x3)) {
2630                 dev_vdbg(hsotg->dev, "Non-aligned buffer\n");
2631                 if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) {
2632                         dev_err(hsotg->dev,
2633                                 "Failed to allocate memory to handle non-aligned buffer\n");
2634                         /* Add channel back to free list */
2635                         chan->align_buf = 0;
2636                         chan->multi_count = 0;
2637                         list_add_tail(&chan->hc_list_entry,
2638                                       &hsotg->free_hc_list);
2639                         qtd->in_process = 0;
2640                         qh->channel = NULL;
2641                         return -ENOMEM;
2642                 }
2643         } else {
2644                 /*
2645                  * We assume that DMA is always aligned in non-split
2646                  * case or split out case. Warn if not.
2647                  */
2648                 WARN_ON_ONCE(hsotg->params.host_dma &&
2649                              (chan->xfer_dma & 0x3));
2650                 chan->align_buf = 0;
2651         }
2652
2653         if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
2654             chan->ep_type == USB_ENDPOINT_XFER_ISOC)
2655                 /*
2656                  * This value may be modified when the transfer is started
2657                  * to reflect the actual transfer length
2658                  */
2659                 chan->multi_count = qh->maxp_mult;
2660
2661         if (hsotg->params.dma_desc_enable) {
2662                 chan->desc_list_addr = qh->desc_list_dma;
2663                 chan->desc_list_sz = qh->desc_list_sz;
2664         }
2665
2666         dwc2_hc_init(hsotg, chan);
2667         chan->qh = qh;
2668
2669         return 0;
2670 }
2671
2672 /**
2673  * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer
2674  * schedule and assigns them to available host channels. Called from the HCD
2675  * interrupt handler functions.
2676  *
2677  * @hsotg: The HCD state structure
2678  *
2679  * Return: The types of new transactions that were assigned to host channels
2680  */
2681 enum dwc2_transaction_type dwc2_hcd_select_transactions(
2682                 struct dwc2_hsotg *hsotg)
2683 {
2684         enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE;
2685         struct list_head *qh_ptr;
2686         struct dwc2_qh *qh;
2687         int num_channels;
2688
2689 #ifdef DWC2_DEBUG_SOF
2690         dev_vdbg(hsotg->dev, "  Select Transactions\n");
2691 #endif
2692
2693         /* Process entries in the periodic ready list */
2694         qh_ptr = hsotg->periodic_sched_ready.next;
2695         while (qh_ptr != &hsotg->periodic_sched_ready) {
2696                 if (list_empty(&hsotg->free_hc_list))
2697                         break;
2698                 if (hsotg->params.uframe_sched) {
2699                         if (hsotg->available_host_channels <= 1)
2700                                 break;
2701                         hsotg->available_host_channels--;
2702                 }
2703                 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
2704                 if (dwc2_assign_and_init_hc(hsotg, qh)) {
2705                         if (hsotg->params.uframe_sched)
2706                                 hsotg->available_host_channels++;
2707                         break;
2708                 }
2709
2710                 /*
2711                  * Move the QH from the periodic ready schedule to the
2712                  * periodic assigned schedule
2713                  */
2714                 qh_ptr = qh_ptr->next;
2715                 list_move_tail(&qh->qh_list_entry,
2716                                &hsotg->periodic_sched_assigned);
2717                 ret_val = DWC2_TRANSACTION_PERIODIC;
2718         }
2719
2720         /*
2721          * Process entries in the inactive portion of the non-periodic
2722          * schedule. Some free host channels may not be used if they are
2723          * reserved for periodic transfers.
2724          */
2725         num_channels = hsotg->params.host_channels;
2726         qh_ptr = hsotg->non_periodic_sched_inactive.next;
2727         while (qh_ptr != &hsotg->non_periodic_sched_inactive) {
2728                 if (!hsotg->params.uframe_sched &&
2729                     hsotg->non_periodic_channels >= num_channels -
2730                                                 hsotg->periodic_channels)
2731                         break;
2732                 if (list_empty(&hsotg->free_hc_list))
2733                         break;
2734                 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
2735                 if (hsotg->params.uframe_sched) {
2736                         if (hsotg->available_host_channels < 1)
2737                                 break;
2738                         hsotg->available_host_channels--;
2739                 }
2740
2741                 if (dwc2_assign_and_init_hc(hsotg, qh)) {
2742                         if (hsotg->params.uframe_sched)
2743                                 hsotg->available_host_channels++;
2744                         break;
2745                 }
2746
2747                 /*
2748                  * Move the QH from the non-periodic inactive schedule to the
2749                  * non-periodic active schedule
2750                  */
2751                 qh_ptr = qh_ptr->next;
2752                 list_move_tail(&qh->qh_list_entry,
2753                                &hsotg->non_periodic_sched_active);
2754
2755                 if (ret_val == DWC2_TRANSACTION_NONE)
2756                         ret_val = DWC2_TRANSACTION_NON_PERIODIC;
2757                 else
2758                         ret_val = DWC2_TRANSACTION_ALL;
2759
2760                 if (!hsotg->params.uframe_sched)
2761                         hsotg->non_periodic_channels++;
2762         }
2763
2764         return ret_val;
2765 }
2766
2767 /**
2768  * dwc2_queue_transaction() - Attempts to queue a single transaction request for
2769  * a host channel associated with either a periodic or non-periodic transfer
2770  *
2771  * @hsotg: The HCD state structure
2772  * @chan:  Host channel descriptor associated with either a periodic or
2773  *         non-periodic transfer
2774  * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO
2775  *                     for periodic transfers or the non-periodic Tx FIFO
2776  *                     for non-periodic transfers
2777  *
2778  * Return: 1 if a request is queued and more requests may be needed to
2779  * complete the transfer, 0 if no more requests are required for this
2780  * transfer, -1 if there is insufficient space in the Tx FIFO
2781  *
2782  * This function assumes that there is space available in the appropriate
2783  * request queue. For an OUT transfer or SETUP transaction in Slave mode,
2784  * it checks whether space is available in the appropriate Tx FIFO.
2785  *
2786  * Must be called with interrupt disabled and spinlock held
2787  */
2788 static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg,
2789                                   struct dwc2_host_chan *chan,
2790                                   u16 fifo_dwords_avail)
2791 {
2792         int retval = 0;
2793
2794         if (chan->do_split)
2795                 /* Put ourselves on the list to keep order straight */
2796                 list_move_tail(&chan->split_order_list_entry,
2797                                &hsotg->split_order);
2798
2799         if (hsotg->params.host_dma && chan->qh) {
2800                 if (hsotg->params.dma_desc_enable) {
2801                         if (!chan->xfer_started ||
2802                             chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
2803                                 dwc2_hcd_start_xfer_ddma(hsotg, chan->qh);
2804                                 chan->qh->ping_state = 0;
2805                         }
2806                 } else if (!chan->xfer_started) {
2807                         dwc2_hc_start_transfer(hsotg, chan);
2808                         chan->qh->ping_state = 0;
2809                 }
2810         } else if (chan->halt_pending) {
2811                 /* Don't queue a request if the channel has been halted */
2812         } else if (chan->halt_on_queue) {
2813                 dwc2_hc_halt(hsotg, chan, chan->halt_status);
2814         } else if (chan->do_ping) {
2815                 if (!chan->xfer_started)
2816                         dwc2_hc_start_transfer(hsotg, chan);
2817         } else if (!chan->ep_is_in ||
2818                    chan->data_pid_start == DWC2_HC_PID_SETUP) {
2819                 if ((fifo_dwords_avail * 4) >= chan->max_packet) {
2820                         if (!chan->xfer_started) {
2821                                 dwc2_hc_start_transfer(hsotg, chan);
2822                                 retval = 1;
2823                         } else {
2824                                 retval = dwc2_hc_continue_transfer(hsotg, chan);
2825                         }
2826                 } else {
2827                         retval = -1;
2828                 }
2829         } else {
2830                 if (!chan->xfer_started) {
2831                         dwc2_hc_start_transfer(hsotg, chan);
2832                         retval = 1;
2833                 } else {
2834                         retval = dwc2_hc_continue_transfer(hsotg, chan);
2835                 }
2836         }
2837
2838         return retval;
2839 }
2840
2841 /*
2842  * Processes periodic channels for the next frame and queues transactions for
2843  * these channels to the DWC_otg controller. After queueing transactions, the
2844  * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
2845  * to queue as Periodic Tx FIFO or request queue space becomes available.
2846  * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
2847  *
2848  * Must be called with interrupt disabled and spinlock held
2849  */
2850 static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg)
2851 {
2852         struct list_head *qh_ptr;
2853         struct dwc2_qh *qh;
2854         u32 tx_status;
2855         u32 fspcavail;
2856         u32 gintmsk;
2857         int status;
2858         bool no_queue_space = false;
2859         bool no_fifo_space = false;
2860         u32 qspcavail;
2861
2862         /* If empty list then just adjust interrupt enables */
2863         if (list_empty(&hsotg->periodic_sched_assigned))
2864                 goto exit;
2865
2866         if (dbg_perio())
2867                 dev_vdbg(hsotg->dev, "Queue periodic transactions\n");
2868
2869         tx_status = dwc2_readl(hsotg, HPTXSTS);
2870         qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
2871                     TXSTS_QSPCAVAIL_SHIFT;
2872         fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
2873                     TXSTS_FSPCAVAIL_SHIFT;
2874
2875         if (dbg_perio()) {
2876                 dev_vdbg(hsotg->dev, "  P Tx Req Queue Space Avail (before queue): %d\n",
2877                          qspcavail);
2878                 dev_vdbg(hsotg->dev, "  P Tx FIFO Space Avail (before queue): %d\n",
2879                          fspcavail);
2880         }
2881
2882         qh_ptr = hsotg->periodic_sched_assigned.next;
2883         while (qh_ptr != &hsotg->periodic_sched_assigned) {
2884                 tx_status = dwc2_readl(hsotg, HPTXSTS);
2885                 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
2886                             TXSTS_QSPCAVAIL_SHIFT;
2887                 if (qspcavail == 0) {
2888                         no_queue_space = true;
2889                         break;
2890                 }
2891
2892                 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
2893                 if (!qh->channel) {
2894                         qh_ptr = qh_ptr->next;
2895                         continue;
2896                 }
2897
2898                 /* Make sure EP's TT buffer is clean before queueing qtds */
2899                 if (qh->tt_buffer_dirty) {
2900                         qh_ptr = qh_ptr->next;
2901                         continue;
2902                 }
2903
2904                 /*
2905                  * Set a flag if we're queuing high-bandwidth in slave mode.
2906                  * The flag prevents any halts to get into the request queue in
2907                  * the middle of multiple high-bandwidth packets getting queued.
2908                  */
2909                 if (!hsotg->params.host_dma &&
2910                     qh->channel->multi_count > 1)
2911                         hsotg->queuing_high_bandwidth = 1;
2912
2913                 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
2914                             TXSTS_FSPCAVAIL_SHIFT;
2915                 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail);
2916                 if (status < 0) {
2917                         no_fifo_space = true;
2918                         break;
2919                 }
2920
2921                 /*
2922                  * In Slave mode, stay on the current transfer until there is
2923                  * nothing more to do or the high-bandwidth request count is
2924                  * reached. In DMA mode, only need to queue one request. The
2925                  * controller automatically handles multiple packets for
2926                  * high-bandwidth transfers.
2927                  */
2928                 if (hsotg->params.host_dma || status == 0 ||
2929                     qh->channel->requests == qh->channel->multi_count) {
2930                         qh_ptr = qh_ptr->next;
2931                         /*
2932                          * Move the QH from the periodic assigned schedule to
2933                          * the periodic queued schedule
2934                          */
2935                         list_move_tail(&qh->qh_list_entry,
2936                                        &hsotg->periodic_sched_queued);
2937
2938                         /* done queuing high bandwidth */
2939                         hsotg->queuing_high_bandwidth = 0;
2940                 }
2941         }
2942
2943 exit:
2944         if (no_queue_space || no_fifo_space ||
2945             (!hsotg->params.host_dma &&
2946              !list_empty(&hsotg->periodic_sched_assigned))) {
2947                 /*
2948                  * May need to queue more transactions as the request
2949                  * queue or Tx FIFO empties. Enable the periodic Tx
2950                  * FIFO empty interrupt. (Always use the half-empty
2951                  * level to ensure that new requests are loaded as
2952                  * soon as possible.)
2953                  */
2954                 gintmsk = dwc2_readl(hsotg, GINTMSK);
2955                 if (!(gintmsk & GINTSTS_PTXFEMP)) {
2956                         gintmsk |= GINTSTS_PTXFEMP;
2957                         dwc2_writel(hsotg, gintmsk, GINTMSK);
2958                 }
2959         } else {
2960                 /*
2961                  * Disable the Tx FIFO empty interrupt since there are
2962                  * no more transactions that need to be queued right
2963                  * now. This function is called from interrupt
2964                  * handlers to queue more transactions as transfer
2965                  * states change.
2966                  */
2967                 gintmsk = dwc2_readl(hsotg, GINTMSK);
2968                 if (gintmsk & GINTSTS_PTXFEMP) {
2969                         gintmsk &= ~GINTSTS_PTXFEMP;
2970                         dwc2_writel(hsotg, gintmsk, GINTMSK);
2971                 }
2972         }
2973 }
2974
2975 /*
2976  * Processes active non-periodic channels and queues transactions for these
2977  * channels to the DWC_otg controller. After queueing transactions, the NP Tx
2978  * FIFO Empty interrupt is enabled if there are more transactions to queue as
2979  * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
2980  * FIFO Empty interrupt is disabled.
2981  *
2982  * Must be called with interrupt disabled and spinlock held
2983  */
2984 static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg)
2985 {
2986         struct list_head *orig_qh_ptr;
2987         struct dwc2_qh *qh;
2988         u32 tx_status;
2989         u32 qspcavail;
2990         u32 fspcavail;
2991         u32 gintmsk;
2992         int status;
2993         int no_queue_space = 0;
2994         int no_fifo_space = 0;
2995         int more_to_do = 0;
2996
2997         dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n");
2998
2999         tx_status = dwc2_readl(hsotg, GNPTXSTS);
3000         qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
3001                     TXSTS_QSPCAVAIL_SHIFT;
3002         fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
3003                     TXSTS_FSPCAVAIL_SHIFT;
3004         dev_vdbg(hsotg->dev, "  NP Tx Req Queue Space Avail (before queue): %d\n",
3005                  qspcavail);
3006         dev_vdbg(hsotg->dev, "  NP Tx FIFO Space Avail (before queue): %d\n",
3007                  fspcavail);
3008
3009         /*
3010          * Keep track of the starting point. Skip over the start-of-list
3011          * entry.
3012          */
3013         if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active)
3014                 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next;
3015         orig_qh_ptr = hsotg->non_periodic_qh_ptr;
3016
3017         /*
3018          * Process once through the active list or until no more space is
3019          * available in the request queue or the Tx FIFO
3020          */
3021         do {
3022                 tx_status = dwc2_readl(hsotg, GNPTXSTS);
3023                 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
3024                             TXSTS_QSPCAVAIL_SHIFT;
3025                 if (!hsotg->params.host_dma && qspcavail == 0) {
3026                         no_queue_space = 1;
3027                         break;
3028                 }
3029
3030                 qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh,
3031                                 qh_list_entry);
3032                 if (!qh->channel)
3033                         goto next;
3034
3035                 /* Make sure EP's TT buffer is clean before queueing qtds */
3036                 if (qh->tt_buffer_dirty)
3037                         goto next;
3038
3039                 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
3040                             TXSTS_FSPCAVAIL_SHIFT;
3041                 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail);
3042
3043                 if (status > 0) {
3044                         more_to_do = 1;
3045                 } else if (status < 0) {
3046                         no_fifo_space = 1;
3047                         break;
3048                 }
3049 next:
3050                 /* Advance to next QH, skipping start-of-list entry */
3051                 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next;
3052                 if (hsotg->non_periodic_qh_ptr ==
3053                                 &hsotg->non_periodic_sched_active)
3054                         hsotg->non_periodic_qh_ptr =
3055                                         hsotg->non_periodic_qh_ptr->next;
3056         } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr);
3057
3058         if (!hsotg->params.host_dma) {
3059                 tx_status = dwc2_readl(hsotg, GNPTXSTS);
3060                 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
3061                             TXSTS_QSPCAVAIL_SHIFT;
3062                 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
3063                             TXSTS_FSPCAVAIL_SHIFT;
3064                 dev_vdbg(hsotg->dev,
3065                          "  NP Tx Req Queue Space Avail (after queue): %d\n",
3066                          qspcavail);
3067                 dev_vdbg(hsotg->dev,
3068                          "  NP Tx FIFO Space Avail (after queue): %d\n",
3069                          fspcavail);
3070
3071                 if (more_to_do || no_queue_space || no_fifo_space) {
3072                         /*
3073                          * May need to queue more transactions as the request
3074                          * queue or Tx FIFO empties. Enable the non-periodic
3075                          * Tx FIFO empty interrupt. (Always use the half-empty
3076                          * level to ensure that new requests are loaded as
3077                          * soon as possible.)
3078                          */
3079                         gintmsk = dwc2_readl(hsotg, GINTMSK);
3080                         gintmsk |= GINTSTS_NPTXFEMP;
3081                         dwc2_writel(hsotg, gintmsk, GINTMSK);
3082                 } else {
3083                         /*
3084                          * Disable the Tx FIFO empty interrupt since there are
3085                          * no more transactions that need to be queued right
3086                          * now. This function is called from interrupt
3087                          * handlers to queue more transactions as transfer
3088                          * states change.
3089                          */
3090                         gintmsk = dwc2_readl(hsotg, GINTMSK);
3091                         gintmsk &= ~GINTSTS_NPTXFEMP;
3092                         dwc2_writel(hsotg, gintmsk, GINTMSK);
3093                 }
3094         }
3095 }
3096
3097 /**
3098  * dwc2_hcd_queue_transactions() - Processes the currently active host channels
3099  * and queues transactions for these channels to the DWC_otg controller. Called
3100  * from the HCD interrupt handler functions.
3101  *
3102  * @hsotg:   The HCD state structure
3103  * @tr_type: The type(s) of transactions to queue (non-periodic, periodic,
3104  *           or both)
3105  *
3106  * Must be called with interrupt disabled and spinlock held
3107  */
3108 void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
3109                                  enum dwc2_transaction_type tr_type)
3110 {
3111 #ifdef DWC2_DEBUG_SOF
3112         dev_vdbg(hsotg->dev, "Queue Transactions\n");
3113 #endif
3114         /* Process host channels associated with periodic transfers */
3115         if (tr_type == DWC2_TRANSACTION_PERIODIC ||
3116             tr_type == DWC2_TRANSACTION_ALL)
3117                 dwc2_process_periodic_channels(hsotg);
3118
3119         /* Process host channels associated with non-periodic transfers */
3120         if (tr_type == DWC2_TRANSACTION_NON_PERIODIC ||
3121             tr_type == DWC2_TRANSACTION_ALL) {
3122                 if (!list_empty(&hsotg->non_periodic_sched_active)) {
3123                         dwc2_process_non_periodic_channels(hsotg);
3124                 } else {
3125                         /*
3126                          * Ensure NP Tx FIFO empty interrupt is disabled when
3127                          * there are no non-periodic transfers to process
3128                          */
3129                         u32 gintmsk = dwc2_readl(hsotg, GINTMSK);
3130
3131                         gintmsk &= ~GINTSTS_NPTXFEMP;
3132                         dwc2_writel(hsotg, gintmsk, GINTMSK);
3133                 }
3134         }
3135 }
3136
3137 static void dwc2_conn_id_status_change(struct work_struct *work)
3138 {
3139         struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
3140                                                 wf_otg);
3141         u32 count = 0;
3142         u32 gotgctl;
3143         unsigned long flags;
3144
3145         dev_dbg(hsotg->dev, "%s()\n", __func__);
3146
3147         gotgctl = dwc2_readl(hsotg, GOTGCTL);
3148         dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl);
3149         dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n",
3150                 !!(gotgctl & GOTGCTL_CONID_B));
3151
3152         /* B-Device connector (Device Mode) */
3153         if (gotgctl & GOTGCTL_CONID_B) {
3154                 dwc2_vbus_supply_exit(hsotg);
3155                 /* Wait for switch to device mode */
3156                 dev_dbg(hsotg->dev, "connId B\n");
3157                 if (hsotg->bus_suspended) {
3158                         dev_info(hsotg->dev,
3159                                  "Do port resume before switching to device mode\n");
3160                         dwc2_port_resume(hsotg);
3161                 }
3162                 while (!dwc2_is_device_mode(hsotg)) {
3163                         dev_info(hsotg->dev,
3164                                  "Waiting for Peripheral Mode, Mode=%s\n",
3165                                  dwc2_is_host_mode(hsotg) ? "Host" :
3166                                  "Peripheral");
3167                         msleep(20);
3168                         /*
3169                          * Sometimes the initial GOTGCTRL read is wrong, so
3170                          * check it again and jump to host mode if that was
3171                          * the case.
3172                          */
3173                         gotgctl = dwc2_readl(hsotg, GOTGCTL);
3174                         if (!(gotgctl & GOTGCTL_CONID_B))
3175                                 goto host;
3176                         if (++count > 250)
3177                                 break;
3178                 }
3179                 if (count > 250)
3180                         dev_err(hsotg->dev,
3181                                 "Connection id status change timed out\n");
3182
3183                 /*
3184                  * Exit Partial Power Down without restoring registers.
3185                  * No need to check the return value as registers
3186                  * are not being restored.
3187                  */
3188                 if (hsotg->in_ppd && hsotg->lx_state == DWC2_L2)
3189                         dwc2_exit_partial_power_down(hsotg, 0, false);
3190
3191                 hsotg->op_state = OTG_STATE_B_PERIPHERAL;
3192                 dwc2_core_init(hsotg, false);
3193                 dwc2_enable_global_interrupts(hsotg);
3194                 spin_lock_irqsave(&hsotg->lock, flags);
3195                 dwc2_hsotg_core_init_disconnected(hsotg, false);
3196                 spin_unlock_irqrestore(&hsotg->lock, flags);
3197                 /* Enable ACG feature in device mode,if supported */
3198                 dwc2_enable_acg(hsotg);
3199                 dwc2_hsotg_core_connect(hsotg);
3200         } else {
3201 host:
3202                 /* A-Device connector (Host Mode) */
3203                 dev_dbg(hsotg->dev, "connId A\n");
3204                 while (!dwc2_is_host_mode(hsotg)) {
3205                         dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n",
3206                                  dwc2_is_host_mode(hsotg) ?
3207                                  "Host" : "Peripheral");
3208                         msleep(20);
3209                         if (++count > 250)
3210                                 break;
3211                 }
3212                 if (count > 250)
3213                         dev_err(hsotg->dev,
3214                                 "Connection id status change timed out\n");
3215
3216                 spin_lock_irqsave(&hsotg->lock, flags);
3217                 dwc2_hsotg_disconnect(hsotg);
3218                 spin_unlock_irqrestore(&hsotg->lock, flags);
3219
3220                 hsotg->op_state = OTG_STATE_A_HOST;
3221                 /* Initialize the Core for Host mode */
3222                 dwc2_core_init(hsotg, false);
3223                 dwc2_enable_global_interrupts(hsotg);
3224                 dwc2_hcd_start(hsotg);
3225         }
3226 }
3227
3228 static void dwc2_wakeup_detected(struct timer_list *t)
3229 {
3230         struct dwc2_hsotg *hsotg = from_timer(hsotg, t, wkp_timer);
3231         u32 hprt0;
3232
3233         dev_dbg(hsotg->dev, "%s()\n", __func__);
3234
3235         /*
3236          * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
3237          * so that OPT tests pass with all PHYs.)
3238          */
3239         hprt0 = dwc2_read_hprt0(hsotg);
3240         dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0);
3241         hprt0 &= ~HPRT0_RES;
3242         dwc2_writel(hsotg, hprt0, HPRT0);
3243         dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
3244                 dwc2_readl(hsotg, HPRT0));
3245
3246         dwc2_hcd_rem_wakeup(hsotg);
3247         hsotg->bus_suspended = false;
3248
3249         /* Change to L0 state */
3250         hsotg->lx_state = DWC2_L0;
3251 }
3252
3253 static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg)
3254 {
3255         struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
3256
3257         return hcd->self.b_hnp_enable;
3258 }
3259
3260 /**
3261  * dwc2_port_suspend() - Put controller in suspend mode for host.
3262  *
3263  * @hsotg: Programming view of the DWC_otg controller
3264  * @windex: The control request wIndex field
3265  *
3266  * Return: non-zero if failed to enter suspend mode for host.
3267  *
3268  * This function is for entering Host mode suspend.
3269  * Must NOT be called with interrupt disabled or spinlock held.
3270  */
3271 int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
3272 {
3273         unsigned long flags;
3274         u32 pcgctl;
3275         u32 gotgctl;
3276         int ret = 0;
3277
3278         dev_dbg(hsotg->dev, "%s()\n", __func__);
3279
3280         spin_lock_irqsave(&hsotg->lock, flags);
3281
3282         if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) {
3283                 gotgctl = dwc2_readl(hsotg, GOTGCTL);
3284                 gotgctl |= GOTGCTL_HSTSETHNPEN;
3285                 dwc2_writel(hsotg, gotgctl, GOTGCTL);
3286                 hsotg->op_state = OTG_STATE_A_SUSPEND;
3287         }
3288
3289         switch (hsotg->params.power_down) {
3290         case DWC2_POWER_DOWN_PARAM_PARTIAL:
3291                 ret = dwc2_enter_partial_power_down(hsotg);
3292                 if (ret)
3293                         dev_err(hsotg->dev,
3294                                 "enter partial_power_down failed.\n");
3295                 break;
3296         case DWC2_POWER_DOWN_PARAM_HIBERNATION:
3297                 /*
3298                  * Perform spin unlock and lock because in
3299                  * "dwc2_host_enter_hibernation()" function there is a spinlock
3300                  * logic which prevents servicing of any IRQ during entering
3301                  * hibernation.
3302                  */
3303                 spin_unlock_irqrestore(&hsotg->lock, flags);
3304                 ret = dwc2_enter_hibernation(hsotg, 1);
3305                 if (ret)
3306                         dev_err(hsotg->dev, "enter hibernation failed.\n");
3307                 spin_lock_irqsave(&hsotg->lock, flags);
3308                 break;
3309         case DWC2_POWER_DOWN_PARAM_NONE:
3310                 /*
3311                  * If not hibernation nor partial power down are supported,
3312                  * clock gating is used to save power.
3313                  */
3314                 if (!hsotg->params.no_clock_gating)
3315                         dwc2_host_enter_clock_gating(hsotg);
3316                 break;
3317         }
3318
3319         /* For HNP the bus must be suspended for at least 200ms */
3320         if (dwc2_host_is_b_hnp_enabled(hsotg)) {
3321                 pcgctl = dwc2_readl(hsotg, PCGCTL);
3322                 pcgctl &= ~PCGCTL_STOPPCLK;
3323                 dwc2_writel(hsotg, pcgctl, PCGCTL);
3324
3325                 spin_unlock_irqrestore(&hsotg->lock, flags);
3326
3327                 msleep(200);
3328         } else {
3329                 spin_unlock_irqrestore(&hsotg->lock, flags);
3330         }
3331
3332         return ret;
3333 }
3334
3335 /**
3336  * dwc2_port_resume() - Exit controller from suspend mode for host.
3337  *
3338  * @hsotg: Programming view of the DWC_otg controller
3339  *
3340  * Return: non-zero if failed to exit suspend mode for host.
3341  *
3342  * This function is for exiting Host mode suspend.
3343  * Must NOT be called with interrupt disabled or spinlock held.
3344  */
3345 int dwc2_port_resume(struct dwc2_hsotg *hsotg)
3346 {
3347         unsigned long flags;
3348         int ret = 0;
3349
3350         spin_lock_irqsave(&hsotg->lock, flags);
3351
3352         switch (hsotg->params.power_down) {
3353         case DWC2_POWER_DOWN_PARAM_PARTIAL:
3354                 ret = dwc2_exit_partial_power_down(hsotg, 0, true);
3355                 if (ret)
3356                         dev_err(hsotg->dev,
3357                                 "exit partial_power_down failed.\n");
3358                 break;
3359         case DWC2_POWER_DOWN_PARAM_HIBERNATION:
3360                 /* Exit host hibernation. */
3361                 ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
3362                 if (ret)
3363                         dev_err(hsotg->dev, "exit hibernation failed.\n");
3364                 break;
3365         case DWC2_POWER_DOWN_PARAM_NONE:
3366                 /*
3367                  * If not hibernation nor partial power down are supported,
3368                  * port resume is done using the clock gating programming flow.
3369                  */
3370                 spin_unlock_irqrestore(&hsotg->lock, flags);
3371                 dwc2_host_exit_clock_gating(hsotg, 0);
3372                 spin_lock_irqsave(&hsotg->lock, flags);
3373                 break;
3374         }
3375
3376         spin_unlock_irqrestore(&hsotg->lock, flags);
3377
3378         return ret;
3379 }
3380
3381 /* Handles hub class-specific requests */
3382 static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
3383                                 u16 wvalue, u16 windex, char *buf, u16 wlength)
3384 {
3385         struct usb_hub_descriptor *hub_desc;
3386         int retval = 0;
3387         u32 hprt0;
3388         u32 port_status;
3389         u32 speed;
3390         u32 pcgctl;
3391         u32 pwr;
3392
3393         switch (typereq) {
3394         case ClearHubFeature:
3395                 dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue);
3396
3397                 switch (wvalue) {
3398                 case C_HUB_LOCAL_POWER:
3399                 case C_HUB_OVER_CURRENT:
3400                         /* Nothing required here */
3401                         break;
3402
3403                 default:
3404                         retval = -EINVAL;
3405                         dev_err(hsotg->dev,
3406                                 "ClearHubFeature request %1xh unknown\n",
3407                                 wvalue);
3408                 }
3409                 break;
3410
3411         case ClearPortFeature:
3412                 if (wvalue != USB_PORT_FEAT_L1)
3413                         if (!windex || windex > 1)
3414                                 goto error;
3415                 switch (wvalue) {
3416                 case USB_PORT_FEAT_ENABLE:
3417                         dev_dbg(hsotg->dev,
3418                                 "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
3419                         hprt0 = dwc2_read_hprt0(hsotg);
3420                         hprt0 |= HPRT0_ENA;
3421                         dwc2_writel(hsotg, hprt0, HPRT0);
3422                         break;
3423
3424                 case USB_PORT_FEAT_SUSPEND:
3425                         dev_dbg(hsotg->dev,
3426                                 "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
3427
3428                         if (hsotg->bus_suspended)
3429                                 retval = dwc2_port_resume(hsotg);
3430                         break;
3431
3432                 case USB_PORT_FEAT_POWER:
3433                         dev_dbg(hsotg->dev,
3434                                 "ClearPortFeature USB_PORT_FEAT_POWER\n");
3435                         hprt0 = dwc2_read_hprt0(hsotg);
3436                         pwr = hprt0 & HPRT0_PWR;
3437                         hprt0 &= ~HPRT0_PWR;
3438                         dwc2_writel(hsotg, hprt0, HPRT0);
3439                         if (pwr)
3440                                 dwc2_vbus_supply_exit(hsotg);
3441                         break;
3442
3443                 case USB_PORT_FEAT_INDICATOR:
3444                         dev_dbg(hsotg->dev,
3445                                 "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
3446                         /* Port indicator not supported */
3447                         break;
3448
3449                 case USB_PORT_FEAT_C_CONNECTION:
3450                         /*
3451                          * Clears driver's internal Connect Status Change flag
3452                          */
3453                         dev_dbg(hsotg->dev,
3454                                 "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
3455                         hsotg->flags.b.port_connect_status_change = 0;
3456                         break;
3457
3458                 case USB_PORT_FEAT_C_RESET:
3459                         /* Clears driver's internal Port Reset Change flag */
3460                         dev_dbg(hsotg->dev,
3461                                 "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
3462                         hsotg->flags.b.port_reset_change = 0;
3463                         break;
3464
3465                 case USB_PORT_FEAT_C_ENABLE:
3466                         /*
3467                          * Clears the driver's internal Port Enable/Disable
3468                          * Change flag
3469                          */
3470                         dev_dbg(hsotg->dev,
3471                                 "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
3472                         hsotg->flags.b.port_enable_change = 0;
3473                         break;
3474
3475                 case USB_PORT_FEAT_C_SUSPEND:
3476                         /*
3477                          * Clears the driver's internal Port Suspend Change
3478                          * flag, which is set when resume signaling on the host
3479                          * port is complete
3480                          */
3481                         dev_dbg(hsotg->dev,
3482                                 "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
3483                         hsotg->flags.b.port_suspend_change = 0;
3484                         break;
3485
3486                 case USB_PORT_FEAT_C_PORT_L1:
3487                         dev_dbg(hsotg->dev,
3488                                 "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n");
3489                         hsotg->flags.b.port_l1_change = 0;
3490                         break;
3491
3492                 case USB_PORT_FEAT_C_OVER_CURRENT:
3493                         dev_dbg(hsotg->dev,
3494                                 "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
3495                         hsotg->flags.b.port_over_current_change = 0;
3496                         break;
3497
3498                 default:
3499                         retval = -EINVAL;
3500                         dev_err(hsotg->dev,
3501                                 "ClearPortFeature request %1xh unknown or unsupported\n",
3502                                 wvalue);
3503                 }
3504                 break;
3505
3506         case GetHubDescriptor:
3507                 dev_dbg(hsotg->dev, "GetHubDescriptor\n");
3508                 hub_desc = (struct usb_hub_descriptor *)buf;
3509                 hub_desc->bDescLength = 9;
3510                 hub_desc->bDescriptorType = USB_DT_HUB;
3511                 hub_desc->bNbrPorts = 1;
3512                 hub_desc->wHubCharacteristics =
3513                         cpu_to_le16(HUB_CHAR_COMMON_LPSM |
3514                                     HUB_CHAR_INDV_PORT_OCPM);
3515                 hub_desc->bPwrOn2PwrGood = 1;
3516                 hub_desc->bHubContrCurrent = 0;
3517                 hub_desc->u.hs.DeviceRemovable[0] = 0;
3518                 hub_desc->u.hs.DeviceRemovable[1] = 0xff;
3519                 break;
3520
3521         case GetHubStatus:
3522                 dev_dbg(hsotg->dev, "GetHubStatus\n");
3523                 memset(buf, 0, 4);
3524                 break;
3525
3526         case GetPortStatus:
3527                 dev_vdbg(hsotg->dev,
3528                          "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex,
3529                          hsotg->flags.d32);
3530                 if (!windex || windex > 1)
3531                         goto error;
3532
3533                 port_status = 0;
3534                 if (hsotg->flags.b.port_connect_status_change)
3535                         port_status |= USB_PORT_STAT_C_CONNECTION << 16;
3536                 if (hsotg->flags.b.port_enable_change)
3537                         port_status |= USB_PORT_STAT_C_ENABLE << 16;
3538                 if (hsotg->flags.b.port_suspend_change)
3539                         port_status |= USB_PORT_STAT_C_SUSPEND << 16;
3540                 if (hsotg->flags.b.port_l1_change)
3541                         port_status |= USB_PORT_STAT_C_L1 << 16;
3542                 if (hsotg->flags.b.port_reset_change)
3543                         port_status |= USB_PORT_STAT_C_RESET << 16;
3544                 if (hsotg->flags.b.port_over_current_change) {
3545                         dev_warn(hsotg->dev, "Overcurrent change detected\n");
3546                         port_status |= USB_PORT_STAT_C_OVERCURRENT << 16;
3547                 }
3548
3549                 if (!hsotg->flags.b.port_connect_status) {
3550                         /*
3551                          * The port is disconnected, which means the core is
3552                          * either in device mode or it soon will be. Just
3553                          * return 0's for the remainder of the port status
3554                          * since the port register can't be read if the core
3555                          * is in device mode.
3556                          */
3557                         *(__le32 *)buf = cpu_to_le32(port_status);
3558                         break;
3559                 }
3560
3561                 hprt0 = dwc2_readl(hsotg, HPRT0);
3562                 dev_vdbg(hsotg->dev, "  HPRT0: 0x%08x\n", hprt0);
3563
3564                 if (hprt0 & HPRT0_CONNSTS)
3565                         port_status |= USB_PORT_STAT_CONNECTION;
3566                 if (hprt0 & HPRT0_ENA)
3567                         port_status |= USB_PORT_STAT_ENABLE;
3568                 if (hprt0 & HPRT0_SUSP)
3569                         port_status |= USB_PORT_STAT_SUSPEND;
3570                 if (hprt0 & HPRT0_OVRCURRACT)
3571                         port_status |= USB_PORT_STAT_OVERCURRENT;
3572                 if (hprt0 & HPRT0_RST)
3573                         port_status |= USB_PORT_STAT_RESET;
3574                 if (hprt0 & HPRT0_PWR)
3575                         port_status |= USB_PORT_STAT_POWER;
3576
3577                 speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
3578                 if (speed == HPRT0_SPD_HIGH_SPEED)
3579                         port_status |= USB_PORT_STAT_HIGH_SPEED;
3580                 else if (speed == HPRT0_SPD_LOW_SPEED)
3581                         port_status |= USB_PORT_STAT_LOW_SPEED;
3582
3583                 if (hprt0 & HPRT0_TSTCTL_MASK)
3584                         port_status |= USB_PORT_STAT_TEST;
3585                 /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
3586
3587                 if (hsotg->params.dma_desc_fs_enable) {
3588                         /*
3589                          * Enable descriptor DMA only if a full speed
3590                          * device is connected.
3591                          */
3592                         if (hsotg->new_connection &&
3593                             ((port_status &
3594                               (USB_PORT_STAT_CONNECTION |
3595                                USB_PORT_STAT_HIGH_SPEED |
3596                                USB_PORT_STAT_LOW_SPEED)) ==
3597                                USB_PORT_STAT_CONNECTION)) {
3598                                 u32 hcfg;
3599
3600                                 dev_info(hsotg->dev, "Enabling descriptor DMA mode\n");
3601                                 hsotg->params.dma_desc_enable = true;
3602                                 hcfg = dwc2_readl(hsotg, HCFG);
3603                                 hcfg |= HCFG_DESCDMA;
3604                                 dwc2_writel(hsotg, hcfg, HCFG);
3605                                 hsotg->new_connection = false;
3606                         }
3607                 }
3608
3609                 dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status);
3610                 *(__le32 *)buf = cpu_to_le32(port_status);
3611                 break;
3612
3613         case SetHubFeature:
3614                 dev_dbg(hsotg->dev, "SetHubFeature\n");
3615                 /* No HUB features supported */
3616                 break;
3617
3618         case SetPortFeature:
3619                 dev_dbg(hsotg->dev, "SetPortFeature\n");
3620                 if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1))
3621                         goto error;
3622
3623                 if (!hsotg->flags.b.port_connect_status) {
3624                         /*
3625                          * The port is disconnected, which means the core is
3626                          * either in device mode or it soon will be. Just
3627                          * return without doing anything since the port
3628                          * register can't be written if the core is in device
3629                          * mode.
3630                          */
3631                         break;
3632                 }
3633
3634                 switch (wvalue) {
3635                 case USB_PORT_FEAT_SUSPEND:
3636                         dev_dbg(hsotg->dev,
3637                                 "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
3638                         if (windex != hsotg->otg_port)
3639                                 goto error;
3640                         if (!hsotg->bus_suspended)
3641                                 retval = dwc2_port_suspend(hsotg, windex);
3642                         break;
3643
3644                 case USB_PORT_FEAT_POWER:
3645                         dev_dbg(hsotg->dev,
3646                                 "SetPortFeature - USB_PORT_FEAT_POWER\n");
3647                         hprt0 = dwc2_read_hprt0(hsotg);
3648                         pwr = hprt0 & HPRT0_PWR;
3649                         hprt0 |= HPRT0_PWR;
3650                         dwc2_writel(hsotg, hprt0, HPRT0);
3651                         if (!pwr)
3652                                 dwc2_vbus_supply_init(hsotg);
3653                         break;
3654
3655                 case USB_PORT_FEAT_RESET:
3656                         dev_dbg(hsotg->dev,
3657                                 "SetPortFeature - USB_PORT_FEAT_RESET\n");
3658
3659                         hprt0 = dwc2_read_hprt0(hsotg);
3660
3661                         if (hsotg->hibernated) {
3662                                 retval = dwc2_exit_hibernation(hsotg, 0, 1, 1);
3663                                 if (retval)
3664                                         dev_err(hsotg->dev,
3665                                                 "exit hibernation failed\n");
3666                         }
3667
3668                         if (hsotg->in_ppd) {
3669                                 retval = dwc2_exit_partial_power_down(hsotg, 1,
3670                                                                       true);
3671                                 if (retval)
3672                                         dev_err(hsotg->dev,
3673                                                 "exit partial_power_down failed\n");
3674                         }
3675
3676                         if (hsotg->params.power_down ==
3677                             DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
3678                                 dwc2_host_exit_clock_gating(hsotg, 0);
3679
3680                         pcgctl = dwc2_readl(hsotg, PCGCTL);
3681                         pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK);
3682                         dwc2_writel(hsotg, pcgctl, PCGCTL);
3683                         /* ??? Original driver does this */
3684                         dwc2_writel(hsotg, 0, PCGCTL);
3685
3686                         hprt0 = dwc2_read_hprt0(hsotg);
3687                         pwr = hprt0 & HPRT0_PWR;
3688                         /* Clear suspend bit if resetting from suspend state */
3689                         hprt0 &= ~HPRT0_SUSP;
3690
3691                         /*
3692                          * When B-Host the Port reset bit is set in the Start
3693                          * HCD Callback function, so that the reset is started
3694                          * within 1ms of the HNP success interrupt
3695                          */
3696                         if (!dwc2_hcd_is_b_host(hsotg)) {
3697                                 hprt0 |= HPRT0_PWR | HPRT0_RST;
3698                                 dev_dbg(hsotg->dev,
3699                                         "In host mode, hprt0=%08x\n", hprt0);
3700                                 dwc2_writel(hsotg, hprt0, HPRT0);
3701                                 if (!pwr)
3702                                         dwc2_vbus_supply_init(hsotg);
3703                         }
3704
3705                         /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
3706                         msleep(50);
3707                         hprt0 &= ~HPRT0_RST;
3708                         dwc2_writel(hsotg, hprt0, HPRT0);
3709                         hsotg->lx_state = DWC2_L0; /* Now back to On state */
3710                         break;
3711
3712                 case USB_PORT_FEAT_INDICATOR:
3713                         dev_dbg(hsotg->dev,
3714                                 "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
3715                         /* Not supported */
3716                         break;
3717
3718                 case USB_PORT_FEAT_TEST:
3719                         hprt0 = dwc2_read_hprt0(hsotg);
3720                         dev_dbg(hsotg->dev,
3721                                 "SetPortFeature - USB_PORT_FEAT_TEST\n");
3722                         hprt0 &= ~HPRT0_TSTCTL_MASK;
3723                         hprt0 |= (windex >> 8) << HPRT0_TSTCTL_SHIFT;
3724                         dwc2_writel(hsotg, hprt0, HPRT0);
3725                         break;
3726
3727                 default:
3728                         retval = -EINVAL;
3729                         dev_err(hsotg->dev,
3730                                 "SetPortFeature %1xh unknown or unsupported\n",
3731                                 wvalue);
3732                         break;
3733                 }
3734                 break;
3735
3736         default:
3737 error:
3738                 retval = -EINVAL;
3739                 dev_dbg(hsotg->dev,
3740                         "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n",
3741                         typereq, windex, wvalue);
3742                 break;
3743         }
3744
3745         return retval;
3746 }
3747
3748 static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port)
3749 {
3750         int retval;
3751
3752         if (port != 1)
3753                 return -EINVAL;
3754
3755         retval = (hsotg->flags.b.port_connect_status_change ||
3756                   hsotg->flags.b.port_reset_change ||
3757                   hsotg->flags.b.port_enable_change ||
3758                   hsotg->flags.b.port_suspend_change ||
3759                   hsotg->flags.b.port_over_current_change);
3760
3761         if (retval) {
3762                 dev_dbg(hsotg->dev,
3763                         "DWC OTG HCD HUB STATUS DATA: Root port status changed\n");
3764                 dev_dbg(hsotg->dev, "  port_connect_status_change: %d\n",
3765                         hsotg->flags.b.port_connect_status_change);
3766                 dev_dbg(hsotg->dev, "  port_reset_change: %d\n",
3767                         hsotg->flags.b.port_reset_change);
3768                 dev_dbg(hsotg->dev, "  port_enable_change: %d\n",
3769                         hsotg->flags.b.port_enable_change);
3770                 dev_dbg(hsotg->dev, "  port_suspend_change: %d\n",
3771                         hsotg->flags.b.port_suspend_change);
3772                 dev_dbg(hsotg->dev, "  port_over_current_change: %d\n",
3773                         hsotg->flags.b.port_over_current_change);
3774         }
3775
3776         return retval;
3777 }
3778
3779 int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
3780 {
3781         u32 hfnum = dwc2_readl(hsotg, HFNUM);
3782
3783 #ifdef DWC2_DEBUG_SOF
3784         dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n",
3785                  (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT);
3786 #endif
3787         return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
3788 }
3789
3790 int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us)
3791 {
3792         u32 hprt = dwc2_readl(hsotg, HPRT0);
3793         u32 hfir = dwc2_readl(hsotg, HFIR);
3794         u32 hfnum = dwc2_readl(hsotg, HFNUM);
3795         unsigned int us_per_frame;
3796         unsigned int frame_number;
3797         unsigned int remaining;
3798         unsigned int interval;
3799         unsigned int phy_clks;
3800
3801         /* High speed has 125 us per (micro) frame; others are 1 ms per */
3802         us_per_frame = (hprt & HPRT0_SPD_MASK) ? 1000 : 125;
3803
3804         /* Extract fields */
3805         frame_number = (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
3806         remaining = (hfnum & HFNUM_FRREM_MASK) >> HFNUM_FRREM_SHIFT;
3807         interval = (hfir & HFIR_FRINT_MASK) >> HFIR_FRINT_SHIFT;
3808
3809         /*
3810          * Number of phy clocks since the last tick of the frame number after
3811          * "us" has passed.
3812          */
3813         phy_clks = (interval - remaining) +
3814                    DIV_ROUND_UP(interval * us, us_per_frame);
3815
3816         return dwc2_frame_num_inc(frame_number, phy_clks / interval);
3817 }
3818
3819 int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg)
3820 {
3821         return hsotg->op_state == OTG_STATE_B_HOST;
3822 }
3823
3824 static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg,
3825                                                int iso_desc_count,
3826                                                gfp_t mem_flags)
3827 {
3828         struct dwc2_hcd_urb *urb;
3829
3830         urb = kzalloc(struct_size(urb, iso_descs, iso_desc_count), mem_flags);
3831         if (urb)
3832                 urb->packet_count = iso_desc_count;
3833         return urb;
3834 }
3835
3836 static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg,
3837                                       struct dwc2_hcd_urb *urb, u8 dev_addr,
3838                                       u8 ep_num, u8 ep_type, u8 ep_dir,
3839                                       u16 maxp, u16 maxp_mult)
3840 {
3841         if (dbg_perio() ||
3842             ep_type == USB_ENDPOINT_XFER_BULK ||
3843             ep_type == USB_ENDPOINT_XFER_CONTROL)
3844                 dev_vdbg(hsotg->dev,
3845                          "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n",
3846                          dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult);
3847         urb->pipe_info.dev_addr = dev_addr;
3848         urb->pipe_info.ep_num = ep_num;
3849         urb->pipe_info.pipe_type = ep_type;
3850         urb->pipe_info.pipe_dir = ep_dir;
3851         urb->pipe_info.maxp = maxp;
3852         urb->pipe_info.maxp_mult = maxp_mult;
3853 }
3854
3855 /*
3856  * NOTE: This function will be removed once the peripheral controller code
3857  * is integrated and the driver is stable
3858  */
3859 void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg)
3860 {
3861 #ifdef DEBUG
3862         struct dwc2_host_chan *chan;
3863         struct dwc2_hcd_urb *urb;
3864         struct dwc2_qtd *qtd;
3865         int num_channels;
3866         u32 np_tx_status;
3867         u32 p_tx_status;
3868         int i;
3869
3870         num_channels = hsotg->params.host_channels;
3871         dev_dbg(hsotg->dev, "\n");
3872         dev_dbg(hsotg->dev,
3873                 "************************************************************\n");
3874         dev_dbg(hsotg->dev, "HCD State:\n");
3875         dev_dbg(hsotg->dev, "  Num channels: %d\n", num_channels);
3876
3877         for (i = 0; i < num_channels; i++) {
3878                 chan = hsotg->hc_ptr_array[i];
3879                 dev_dbg(hsotg->dev, "  Channel %d:\n", i);
3880                 dev_dbg(hsotg->dev,
3881                         "    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
3882                         chan->dev_addr, chan->ep_num, chan->ep_is_in);
3883                 dev_dbg(hsotg->dev, "    speed: %d\n", chan->speed);
3884                 dev_dbg(hsotg->dev, "    ep_type: %d\n", chan->ep_type);
3885                 dev_dbg(hsotg->dev, "    max_packet: %d\n", chan->max_packet);
3886                 dev_dbg(hsotg->dev, "    data_pid_start: %d\n",
3887                         chan->data_pid_start);
3888                 dev_dbg(hsotg->dev, "    multi_count: %d\n", chan->multi_count);
3889                 dev_dbg(hsotg->dev, "    xfer_started: %d\n",
3890                         chan->xfer_started);
3891                 dev_dbg(hsotg->dev, "    xfer_buf: %p\n", chan->xfer_buf);
3892                 dev_dbg(hsotg->dev, "    xfer_dma: %08lx\n",
3893                         (unsigned long)chan->xfer_dma);
3894                 dev_dbg(hsotg->dev, "    xfer_len: %d\n", chan->xfer_len);
3895                 dev_dbg(hsotg->dev, "    xfer_count: %d\n", chan->xfer_count);
3896                 dev_dbg(hsotg->dev, "    halt_on_queue: %d\n",
3897                         chan->halt_on_queue);
3898                 dev_dbg(hsotg->dev, "    halt_pending: %d\n",
3899                         chan->halt_pending);
3900                 dev_dbg(hsotg->dev, "    halt_status: %d\n", chan->halt_status);
3901                 dev_dbg(hsotg->dev, "    do_split: %d\n", chan->do_split);
3902                 dev_dbg(hsotg->dev, "    complete_split: %d\n",
3903                         chan->complete_split);
3904                 dev_dbg(hsotg->dev, "    hub_addr: %d\n", chan->hub_addr);
3905                 dev_dbg(hsotg->dev, "    hub_port: %d\n", chan->hub_port);
3906                 dev_dbg(hsotg->dev, "    xact_pos: %d\n", chan->xact_pos);
3907                 dev_dbg(hsotg->dev, "    requests: %d\n", chan->requests);
3908                 dev_dbg(hsotg->dev, "    qh: %p\n", chan->qh);
3909
3910                 if (chan->xfer_started) {
3911                         u32 hfnum, hcchar, hctsiz, hcint, hcintmsk;
3912
3913                         hfnum = dwc2_readl(hsotg, HFNUM);
3914                         hcchar = dwc2_readl(hsotg, HCCHAR(i));
3915                         hctsiz = dwc2_readl(hsotg, HCTSIZ(i));
3916                         hcint = dwc2_readl(hsotg, HCINT(i));
3917                         hcintmsk = dwc2_readl(hsotg, HCINTMSK(i));
3918                         dev_dbg(hsotg->dev, "    hfnum: 0x%08x\n", hfnum);
3919                         dev_dbg(hsotg->dev, "    hcchar: 0x%08x\n", hcchar);
3920                         dev_dbg(hsotg->dev, "    hctsiz: 0x%08x\n", hctsiz);
3921                         dev_dbg(hsotg->dev, "    hcint: 0x%08x\n", hcint);
3922                         dev_dbg(hsotg->dev, "    hcintmsk: 0x%08x\n", hcintmsk);
3923                 }
3924
3925                 if (!(chan->xfer_started && chan->qh))
3926                         continue;
3927
3928                 list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) {
3929                         if (!qtd->in_process)
3930                                 break;
3931                         urb = qtd->urb;
3932                         dev_dbg(hsotg->dev, "    URB Info:\n");
3933                         dev_dbg(hsotg->dev, "      qtd: %p, urb: %p\n",
3934                                 qtd, urb);
3935                         if (urb) {
3936                                 dev_dbg(hsotg->dev,
3937                                         "      Dev: %d, EP: %d %s\n",
3938                                         dwc2_hcd_get_dev_addr(&urb->pipe_info),
3939                                         dwc2_hcd_get_ep_num(&urb->pipe_info),
3940                                         dwc2_hcd_is_pipe_in(&urb->pipe_info) ?
3941                                         "IN" : "OUT");
3942                                 dev_dbg(hsotg->dev,
3943                                         "      Max packet size: %d (%d mult)\n",
3944                                         dwc2_hcd_get_maxp(&urb->pipe_info),
3945                                         dwc2_hcd_get_maxp_mult(&urb->pipe_info));
3946                                 dev_dbg(hsotg->dev,
3947                                         "      transfer_buffer: %p\n",
3948                                         urb->buf);
3949                                 dev_dbg(hsotg->dev,
3950                                         "      transfer_dma: %08lx\n",
3951                                         (unsigned long)urb->dma);
3952                                 dev_dbg(hsotg->dev,
3953                                         "      transfer_buffer_length: %d\n",
3954                                         urb->length);
3955                                 dev_dbg(hsotg->dev, "      actual_length: %d\n",
3956                                         urb->actual_length);
3957                         }
3958                 }
3959         }
3960
3961         dev_dbg(hsotg->dev, "  non_periodic_channels: %d\n",
3962                 hsotg->non_periodic_channels);
3963         dev_dbg(hsotg->dev, "  periodic_channels: %d\n",
3964                 hsotg->periodic_channels);
3965         dev_dbg(hsotg->dev, "  periodic_usecs: %d\n", hsotg->periodic_usecs);
3966         np_tx_status = dwc2_readl(hsotg, GNPTXSTS);
3967         dev_dbg(hsotg->dev, "  NP Tx Req Queue Space Avail: %d\n",
3968                 (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
3969         dev_dbg(hsotg->dev, "  NP Tx FIFO Space Avail: %d\n",
3970                 (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT);
3971         p_tx_status = dwc2_readl(hsotg, HPTXSTS);
3972         dev_dbg(hsotg->dev, "  P Tx Req Queue Space Avail: %d\n",
3973                 (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
3974         dev_dbg(hsotg->dev, "  P Tx FIFO Space Avail: %d\n",
3975                 (p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT);
3976         dwc2_dump_global_registers(hsotg);
3977         dwc2_dump_host_registers(hsotg);
3978         dev_dbg(hsotg->dev,
3979                 "************************************************************\n");
3980         dev_dbg(hsotg->dev, "\n");
3981 #endif
3982 }
3983
3984 struct wrapper_priv_data {
3985         struct dwc2_hsotg *hsotg;
3986 };
3987
3988 /* Gets the dwc2_hsotg from a usb_hcd */
3989 static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd)
3990 {
3991         struct wrapper_priv_data *p;
3992
3993         p = (struct wrapper_priv_data *)&hcd->hcd_priv;
3994         return p->hsotg;
3995 }
3996
3997 /**
3998  * dwc2_host_get_tt_info() - Get the dwc2_tt associated with context
3999  *
4000  * This will get the dwc2_tt structure (and ttport) associated with the given
4001  * context (which is really just a struct urb pointer).
4002  *
4003  * The first time this is called for a given TT we allocate memory for our
4004  * structure.  When everyone is done and has called dwc2_host_put_tt_info()
4005  * then the refcount for the structure will go to 0 and we'll free it.
4006  *
4007  * @hsotg:     The HCD state structure for the DWC OTG controller.
4008  * @context:   The priv pointer from a struct dwc2_hcd_urb.
4009  * @mem_flags: Flags for allocating memory.
4010  * @ttport:    We'll return this device's port number here.  That's used to
4011  *             reference into the bitmap if we're on a multi_tt hub.
4012  *
4013  * Return: a pointer to a struct dwc2_tt.  Don't forget to call
4014  *         dwc2_host_put_tt_info()!  Returns NULL upon memory alloc failure.
4015  */
4016
4017 struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, void *context,
4018                                       gfp_t mem_flags, int *ttport)
4019 {
4020         struct urb *urb = context;
4021         struct dwc2_tt *dwc_tt = NULL;
4022
4023         if (urb->dev->tt) {
4024                 *ttport = urb->dev->ttport;
4025
4026                 dwc_tt = urb->dev->tt->hcpriv;
4027                 if (!dwc_tt) {
4028                         size_t bitmap_size;
4029
4030                         /*
4031                          * For single_tt we need one schedule.  For multi_tt
4032                          * we need one per port.
4033                          */
4034                         bitmap_size = DWC2_ELEMENTS_PER_LS_BITMAP *
4035                                       sizeof(dwc_tt->periodic_bitmaps[0]);
4036                         if (urb->dev->tt->multi)
4037                                 bitmap_size *= urb->dev->tt->hub->maxchild;
4038
4039                         dwc_tt = kzalloc(sizeof(*dwc_tt) + bitmap_size,
4040                                          mem_flags);
4041                         if (!dwc_tt)
4042                                 return NULL;
4043
4044                         dwc_tt->usb_tt = urb->dev->tt;
4045                         dwc_tt->usb_tt->hcpriv = dwc_tt;
4046                 }
4047
4048                 dwc_tt->refcount++;
4049         }
4050
4051         return dwc_tt;
4052 }
4053
4054 /**
4055  * dwc2_host_put_tt_info() - Put the dwc2_tt from dwc2_host_get_tt_info()
4056  *
4057  * Frees resources allocated by dwc2_host_get_tt_info() if all current holders
4058  * of the structure are done.
4059  *
4060  * It's OK to call this with NULL.
4061  *
4062  * @hsotg:     The HCD state structure for the DWC OTG controller.
4063  * @dwc_tt:    The pointer returned by dwc2_host_get_tt_info.
4064  */
4065 void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, struct dwc2_tt *dwc_tt)
4066 {
4067         /* Model kfree and make put of NULL a no-op */
4068         if (!dwc_tt)
4069                 return;
4070
4071         WARN_ON(dwc_tt->refcount < 1);
4072
4073         dwc_tt->refcount--;
4074         if (!dwc_tt->refcount) {
4075                 dwc_tt->usb_tt->hcpriv = NULL;
4076                 kfree(dwc_tt);
4077         }
4078 }
4079
4080 int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context)
4081 {
4082         struct urb *urb = context;
4083
4084         return urb->dev->speed;
4085 }
4086
4087 static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw,
4088                                         struct urb *urb)
4089 {
4090         struct usb_bus *bus = hcd_to_bus(hcd);
4091
4092         if (urb->interval)
4093                 bus->bandwidth_allocated += bw / urb->interval;
4094         if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
4095                 bus->bandwidth_isoc_reqs++;
4096         else
4097                 bus->bandwidth_int_reqs++;
4098 }
4099
4100 static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw,
4101                                     struct urb *urb)
4102 {
4103         struct usb_bus *bus = hcd_to_bus(hcd);
4104
4105         if (urb->interval)
4106                 bus->bandwidth_allocated -= bw / urb->interval;
4107         if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
4108                 bus->bandwidth_isoc_reqs--;
4109         else
4110                 bus->bandwidth_int_reqs--;
4111 }
4112
4113 /*
4114  * Sets the final status of an URB and returns it to the upper layer. Any
4115  * required cleanup of the URB is performed.
4116  *
4117  * Must be called with interrupt disabled and spinlock held
4118  */
4119 void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
4120                         int status)
4121 {
4122         struct urb *urb;
4123         int i;
4124
4125         if (!qtd) {
4126                 dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__);
4127                 return;
4128         }
4129
4130         if (!qtd->urb) {
4131                 dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__);
4132                 return;
4133         }
4134
4135         urb = qtd->urb->priv;
4136         if (!urb) {
4137                 dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__);
4138                 return;
4139         }
4140
4141         urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb);
4142
4143         if (dbg_urb(urb))
4144                 dev_vdbg(hsotg->dev,
4145                          "%s: urb %p device %d ep %d-%s status %d actual %d\n",
4146                          __func__, urb, usb_pipedevice(urb->pipe),
4147                          usb_pipeendpoint(urb->pipe),
4148                          usb_pipein(urb->pipe) ? "IN" : "OUT", status,
4149                          urb->actual_length);
4150
4151         if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
4152                 if (!hsotg->params.dma_desc_enable)
4153                         urb->start_frame = qtd->qh->start_active_frame;
4154                 urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb);
4155                 for (i = 0; i < urb->number_of_packets; ++i) {
4156                         urb->iso_frame_desc[i].actual_length =
4157                                 dwc2_hcd_urb_get_iso_desc_actual_length(
4158                                                 qtd->urb, i);
4159                         urb->iso_frame_desc[i].status =
4160                                 dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i);
4161                 }
4162         }
4163
4164         if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) {
4165                 for (i = 0; i < urb->number_of_packets; i++)
4166                         dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n",
4167                                  i, urb->iso_frame_desc[i].status);
4168         }
4169
4170         urb->status = status;
4171         if (!status) {
4172                 if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
4173                     urb->actual_length < urb->transfer_buffer_length)
4174                         urb->status = -EREMOTEIO;
4175         }
4176
4177         if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
4178             usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
4179                 struct usb_host_endpoint *ep = urb->ep;
4180
4181                 if (ep)
4182                         dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg),
4183                                         dwc2_hcd_get_ep_bandwidth(hsotg, ep),
4184                                         urb);
4185         }
4186
4187         usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb);
4188         urb->hcpriv = NULL;
4189         kfree(qtd->urb);
4190         qtd->urb = NULL;
4191
4192         usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status);
4193 }
4194
4195 /*
4196  * Work queue function for starting the HCD when A-Cable is connected
4197  */
4198 static void dwc2_hcd_start_func(struct work_struct *work)
4199 {
4200         struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
4201                                                 start_work.work);
4202
4203         dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg);
4204         dwc2_host_start(hsotg);
4205 }
4206
4207 /*
4208  * Reset work queue function
4209  */
4210 static void dwc2_hcd_reset_func(struct work_struct *work)
4211 {
4212         struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
4213                                                 reset_work.work);
4214         unsigned long flags;
4215         u32 hprt0;
4216
4217         dev_dbg(hsotg->dev, "USB RESET function called\n");
4218
4219         spin_lock_irqsave(&hsotg->lock, flags);
4220
4221         hprt0 = dwc2_read_hprt0(hsotg);
4222         hprt0 &= ~HPRT0_RST;
4223         dwc2_writel(hsotg, hprt0, HPRT0);
4224         hsotg->flags.b.port_reset_change = 1;
4225
4226         spin_unlock_irqrestore(&hsotg->lock, flags);
4227 }
4228
4229 static void dwc2_hcd_phy_reset_func(struct work_struct *work)
4230 {
4231         struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
4232                                                 phy_reset_work);
4233         int ret;
4234
4235         ret = phy_reset(hsotg->phy);
4236         if (ret)
4237                 dev_warn(hsotg->dev, "PHY reset failed\n");
4238 }
4239
4240 /*
4241  * =========================================================================
4242  *  Linux HC Driver Functions
4243  * =========================================================================
4244  */
4245
4246 /*
4247  * Initializes the DWC_otg controller and its root hub and prepares it for host
4248  * mode operation. Activates the root port. Returns 0 on success and a negative
4249  * error code on failure.
4250  */
4251 static int _dwc2_hcd_start(struct usb_hcd *hcd)
4252 {
4253         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4254         struct usb_bus *bus = hcd_to_bus(hcd);
4255         unsigned long flags;
4256         u32 hprt0;
4257         int ret;
4258
4259         dev_dbg(hsotg->dev, "DWC OTG HCD START\n");
4260
4261         spin_lock_irqsave(&hsotg->lock, flags);
4262         hsotg->lx_state = DWC2_L0;
4263         hcd->state = HC_STATE_RUNNING;
4264         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4265
4266         if (dwc2_is_device_mode(hsotg)) {
4267                 spin_unlock_irqrestore(&hsotg->lock, flags);
4268                 return 0;       /* why 0 ?? */
4269         }
4270
4271         dwc2_hcd_reinit(hsotg);
4272
4273         hprt0 = dwc2_read_hprt0(hsotg);
4274         /* Has vbus power been turned on in dwc2_core_host_init ? */
4275         if (hprt0 & HPRT0_PWR) {
4276                 /* Enable external vbus supply before resuming root hub */
4277                 spin_unlock_irqrestore(&hsotg->lock, flags);
4278                 ret = dwc2_vbus_supply_init(hsotg);
4279                 if (ret)
4280                         return ret;
4281                 spin_lock_irqsave(&hsotg->lock, flags);
4282         }
4283
4284         /* Initialize and connect root hub if one is not already attached */
4285         if (bus->root_hub) {
4286                 dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n");
4287                 /* Inform the HUB driver to resume */
4288                 usb_hcd_resume_root_hub(hcd);
4289         }
4290
4291         spin_unlock_irqrestore(&hsotg->lock, flags);
4292
4293         return 0;
4294 }
4295
4296 /*
4297  * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
4298  * stopped.
4299  */
4300 static void _dwc2_hcd_stop(struct usb_hcd *hcd)
4301 {
4302         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4303         unsigned long flags;
4304         u32 hprt0;
4305
4306         /* Turn off all host-specific interrupts */
4307         dwc2_disable_host_interrupts(hsotg);
4308
4309         /* Wait for interrupt processing to finish */
4310         synchronize_irq(hcd->irq);
4311
4312         spin_lock_irqsave(&hsotg->lock, flags);
4313         hprt0 = dwc2_read_hprt0(hsotg);
4314         /* Ensure hcd is disconnected */
4315         dwc2_hcd_disconnect(hsotg, true);
4316         dwc2_hcd_stop(hsotg);
4317         hsotg->lx_state = DWC2_L3;
4318         hcd->state = HC_STATE_HALT;
4319         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4320         spin_unlock_irqrestore(&hsotg->lock, flags);
4321
4322         /* keep balanced supply init/exit by checking HPRT0_PWR */
4323         if (hprt0 & HPRT0_PWR)
4324                 dwc2_vbus_supply_exit(hsotg);
4325
4326         usleep_range(1000, 3000);
4327 }
4328
4329 static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
4330 {
4331         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4332         unsigned long flags;
4333         int ret = 0;
4334
4335         spin_lock_irqsave(&hsotg->lock, flags);
4336
4337         if (dwc2_is_device_mode(hsotg))
4338                 goto unlock;
4339
4340         if (hsotg->lx_state != DWC2_L0)
4341                 goto unlock;
4342
4343         if (!HCD_HW_ACCESSIBLE(hcd))
4344                 goto unlock;
4345
4346         if (hsotg->op_state == OTG_STATE_B_PERIPHERAL)
4347                 goto unlock;
4348
4349         if (hsotg->bus_suspended)
4350                 goto skip_power_saving;
4351
4352         if (hsotg->flags.b.port_connect_status == 0)
4353                 goto skip_power_saving;
4354
4355         switch (hsotg->params.power_down) {
4356         case DWC2_POWER_DOWN_PARAM_PARTIAL:
4357                 /* Enter partial_power_down */
4358                 ret = dwc2_enter_partial_power_down(hsotg);
4359                 if (ret)
4360                         dev_err(hsotg->dev,
4361                                 "enter partial_power_down failed\n");
4362                 /* After entering suspend, hardware is not accessible */
4363                 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4364                 break;
4365         case DWC2_POWER_DOWN_PARAM_HIBERNATION:
4366                 /* Enter hibernation */
4367                 spin_unlock_irqrestore(&hsotg->lock, flags);
4368                 ret = dwc2_enter_hibernation(hsotg, 1);
4369                 if (ret)
4370                         dev_err(hsotg->dev, "enter hibernation failed\n");
4371                 spin_lock_irqsave(&hsotg->lock, flags);
4372
4373                 /* After entering suspend, hardware is not accessible */
4374                 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4375                 break;
4376         case DWC2_POWER_DOWN_PARAM_NONE:
4377                 /*
4378                  * If not hibernation nor partial power down are supported,
4379                  * clock gating is used to save power.
4380                  */
4381                 if (!hsotg->params.no_clock_gating) {
4382                         dwc2_host_enter_clock_gating(hsotg);
4383
4384                         /* After entering suspend, hardware is not accessible */
4385                         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4386                 }
4387                 break;
4388         default:
4389                 goto skip_power_saving;
4390         }
4391
4392         spin_unlock_irqrestore(&hsotg->lock, flags);
4393         dwc2_vbus_supply_exit(hsotg);
4394         spin_lock_irqsave(&hsotg->lock, flags);
4395
4396         /* Ask phy to be suspended */
4397         if (!IS_ERR_OR_NULL(hsotg->uphy)) {
4398                 spin_unlock_irqrestore(&hsotg->lock, flags);
4399                 usb_phy_set_suspend(hsotg->uphy, true);
4400                 spin_lock_irqsave(&hsotg->lock, flags);
4401         }
4402
4403 skip_power_saving:
4404         hsotg->lx_state = DWC2_L2;
4405 unlock:
4406         spin_unlock_irqrestore(&hsotg->lock, flags);
4407
4408         return ret;
4409 }
4410
4411 static int _dwc2_hcd_resume(struct usb_hcd *hcd)
4412 {
4413         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4414         unsigned long flags;
4415         u32 hprt0;
4416         int ret = 0;
4417
4418         spin_lock_irqsave(&hsotg->lock, flags);
4419
4420         if (dwc2_is_device_mode(hsotg))
4421                 goto unlock;
4422
4423         if (hsotg->lx_state != DWC2_L2)
4424                 goto unlock;
4425
4426         hprt0 = dwc2_read_hprt0(hsotg);
4427
4428         /*
4429          * Added port connection status checking which prevents exiting from
4430          * Partial Power Down mode from _dwc2_hcd_resume() if not in Partial
4431          * Power Down mode.
4432          */
4433         if (hprt0 & HPRT0_CONNSTS) {
4434                 hsotg->lx_state = DWC2_L0;
4435                 goto unlock;
4436         }
4437
4438         switch (hsotg->params.power_down) {
4439         case DWC2_POWER_DOWN_PARAM_PARTIAL:
4440                 ret = dwc2_exit_partial_power_down(hsotg, 0, true);
4441                 if (ret)
4442                         dev_err(hsotg->dev,
4443                                 "exit partial_power_down failed\n");
4444                 /*
4445                  * Set HW accessible bit before powering on the controller
4446                  * since an interrupt may rise.
4447                  */
4448                 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4449                 break;
4450         case DWC2_POWER_DOWN_PARAM_HIBERNATION:
4451                 ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
4452                 if (ret)
4453                         dev_err(hsotg->dev, "exit hibernation failed.\n");
4454
4455                 /*
4456                  * Set HW accessible bit before powering on the controller
4457                  * since an interrupt may rise.
4458                  */
4459                 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4460                 break;
4461         case DWC2_POWER_DOWN_PARAM_NONE:
4462                 /*
4463                  * If not hibernation nor partial power down are supported,
4464                  * port resume is done using the clock gating programming flow.
4465                  */
4466                 spin_unlock_irqrestore(&hsotg->lock, flags);
4467                 dwc2_host_exit_clock_gating(hsotg, 0);
4468
4469                 /*
4470                  * Initialize the Core for Host mode, as after system resume
4471                  * the global interrupts are disabled.
4472                  */
4473                 dwc2_core_init(hsotg, false);
4474                 dwc2_enable_global_interrupts(hsotg);
4475                 dwc2_hcd_reinit(hsotg);
4476                 spin_lock_irqsave(&hsotg->lock, flags);
4477
4478                 /*
4479                  * Set HW accessible bit before powering on the controller
4480                  * since an interrupt may rise.
4481                  */
4482                 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4483                 break;
4484         default:
4485                 hsotg->lx_state = DWC2_L0;
4486                 goto unlock;
4487         }
4488
4489         /* Change Root port status, as port status change occurred after resume.*/
4490         hsotg->flags.b.port_suspend_change = 1;
4491
4492         /*
4493          * Enable power if not already done.
4494          * This must not be spinlocked since duration
4495          * of this call is unknown.
4496          */
4497         if (!IS_ERR_OR_NULL(hsotg->uphy)) {
4498                 spin_unlock_irqrestore(&hsotg->lock, flags);
4499                 usb_phy_set_suspend(hsotg->uphy, false);
4500                 spin_lock_irqsave(&hsotg->lock, flags);
4501         }
4502
4503         /* Enable external vbus supply after resuming the port. */
4504         spin_unlock_irqrestore(&hsotg->lock, flags);
4505         dwc2_vbus_supply_init(hsotg);
4506
4507         /* Wait for controller to correctly update D+/D- level */
4508         usleep_range(3000, 5000);
4509         spin_lock_irqsave(&hsotg->lock, flags);
4510
4511         /*
4512          * Clear Port Enable and Port Status changes.
4513          * Enable Port Power.
4514          */
4515         dwc2_writel(hsotg, HPRT0_PWR | HPRT0_CONNDET |
4516                         HPRT0_ENACHG, HPRT0);
4517
4518         /* Wait for controller to detect Port Connect */
4519         spin_unlock_irqrestore(&hsotg->lock, flags);
4520         usleep_range(5000, 7000);
4521         spin_lock_irqsave(&hsotg->lock, flags);
4522 unlock:
4523         spin_unlock_irqrestore(&hsotg->lock, flags);
4524
4525         return ret;
4526 }
4527
4528 /* Returns the current frame number */
4529 static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd)
4530 {
4531         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4532
4533         return dwc2_hcd_get_frame_number(hsotg);
4534 }
4535
4536 static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb,
4537                                char *fn_name)
4538 {
4539 #ifdef VERBOSE_DEBUG
4540         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4541         char *pipetype = NULL;
4542         char *speed = NULL;
4543
4544         dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb);
4545         dev_vdbg(hsotg->dev, "  Device address: %d\n",
4546                  usb_pipedevice(urb->pipe));
4547         dev_vdbg(hsotg->dev, "  Endpoint: %d, %s\n",
4548                  usb_pipeendpoint(urb->pipe),
4549                  usb_pipein(urb->pipe) ? "IN" : "OUT");
4550
4551         switch (usb_pipetype(urb->pipe)) {
4552         case PIPE_CONTROL:
4553                 pipetype = "CONTROL";
4554                 break;
4555         case PIPE_BULK:
4556                 pipetype = "BULK";
4557                 break;
4558         case PIPE_INTERRUPT:
4559                 pipetype = "INTERRUPT";
4560                 break;
4561         case PIPE_ISOCHRONOUS:
4562                 pipetype = "ISOCHRONOUS";
4563                 break;
4564         }
4565
4566         dev_vdbg(hsotg->dev, "  Endpoint type: %s %s (%s)\n", pipetype,
4567                  usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ?
4568                  "IN" : "OUT");
4569
4570         switch (urb->dev->speed) {
4571         case USB_SPEED_HIGH:
4572                 speed = "HIGH";
4573                 break;
4574         case USB_SPEED_FULL:
4575                 speed = "FULL";
4576                 break;
4577         case USB_SPEED_LOW:
4578                 speed = "LOW";
4579                 break;
4580         default:
4581                 speed = "UNKNOWN";
4582                 break;
4583         }
4584
4585         dev_vdbg(hsotg->dev, "  Speed: %s\n", speed);
4586         dev_vdbg(hsotg->dev, "  Max packet size: %d (%d mult)\n",
4587                  usb_endpoint_maxp(&urb->ep->desc),
4588                  usb_endpoint_maxp_mult(&urb->ep->desc));
4589
4590         dev_vdbg(hsotg->dev, "  Data buffer length: %d\n",
4591                  urb->transfer_buffer_length);
4592         dev_vdbg(hsotg->dev, "  Transfer buffer: %p, Transfer DMA: %08lx\n",
4593                  urb->transfer_buffer, (unsigned long)urb->transfer_dma);
4594         dev_vdbg(hsotg->dev, "  Setup buffer: %p, Setup DMA: %08lx\n",
4595                  urb->setup_packet, (unsigned long)urb->setup_dma);
4596         dev_vdbg(hsotg->dev, "  Interval: %d\n", urb->interval);
4597
4598         if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
4599                 int i;
4600
4601                 for (i = 0; i < urb->number_of_packets; i++) {
4602                         dev_vdbg(hsotg->dev, "  ISO Desc %d:\n", i);
4603                         dev_vdbg(hsotg->dev, "    offset: %d, length %d\n",
4604                                  urb->iso_frame_desc[i].offset,
4605                                  urb->iso_frame_desc[i].length);
4606                 }
4607         }
4608 #endif
4609 }
4610
4611 /*
4612  * Starts processing a USB transfer request specified by a USB Request Block
4613  * (URB). mem_flags indicates the type of memory allocation to use while
4614  * processing this URB.
4615  */
4616 static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
4617                                  gfp_t mem_flags)
4618 {
4619         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4620         struct usb_host_endpoint *ep = urb->ep;
4621         struct dwc2_hcd_urb *dwc2_urb;
4622         int i;
4623         int retval;
4624         int alloc_bandwidth = 0;
4625         u8 ep_type = 0;
4626         u32 tflags = 0;
4627         void *buf;
4628         unsigned long flags;
4629         struct dwc2_qh *qh;
4630         bool qh_allocated = false;
4631         struct dwc2_qtd *qtd;
4632         struct dwc2_gregs_backup *gr;
4633
4634         gr = &hsotg->gr_backup;
4635
4636         if (dbg_urb(urb)) {
4637                 dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n");
4638                 dwc2_dump_urb_info(hcd, urb, "urb_enqueue");
4639         }
4640
4641         if (hsotg->hibernated) {
4642                 if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
4643                         retval = dwc2_exit_hibernation(hsotg, 0, 0, 1);
4644                 else
4645                         retval = dwc2_exit_hibernation(hsotg, 0, 0, 0);
4646
4647                 if (retval)
4648                         dev_err(hsotg->dev,
4649                                 "exit hibernation failed.\n");
4650         }
4651
4652         if (hsotg->in_ppd) {
4653                 retval = dwc2_exit_partial_power_down(hsotg, 0, true);
4654                 if (retval)
4655                         dev_err(hsotg->dev,
4656                                 "exit partial_power_down failed\n");
4657         }
4658
4659         if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
4660             hsotg->bus_suspended && !hsotg->params.no_clock_gating) {
4661                 if (dwc2_is_device_mode(hsotg))
4662                         dwc2_gadget_exit_clock_gating(hsotg, 0);
4663                 else
4664                         dwc2_host_exit_clock_gating(hsotg, 0);
4665         }
4666
4667         if (!ep)
4668                 return -EINVAL;
4669
4670         if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
4671             usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
4672                 spin_lock_irqsave(&hsotg->lock, flags);
4673                 if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep))
4674                         alloc_bandwidth = 1;
4675                 spin_unlock_irqrestore(&hsotg->lock, flags);
4676         }
4677
4678         switch (usb_pipetype(urb->pipe)) {
4679         case PIPE_CONTROL:
4680                 ep_type = USB_ENDPOINT_XFER_CONTROL;
4681                 break;
4682         case PIPE_ISOCHRONOUS:
4683                 ep_type = USB_ENDPOINT_XFER_ISOC;
4684                 break;
4685         case PIPE_BULK:
4686                 ep_type = USB_ENDPOINT_XFER_BULK;
4687                 break;
4688         case PIPE_INTERRUPT:
4689                 ep_type = USB_ENDPOINT_XFER_INT;
4690                 break;
4691         }
4692
4693         dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets,
4694                                       mem_flags);
4695         if (!dwc2_urb)
4696                 return -ENOMEM;
4697
4698         dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe),
4699                                   usb_pipeendpoint(urb->pipe), ep_type,
4700                                   usb_pipein(urb->pipe),
4701                                   usb_endpoint_maxp(&ep->desc),
4702                                   usb_endpoint_maxp_mult(&ep->desc));
4703
4704         buf = urb->transfer_buffer;
4705
4706         if (hcd_uses_dma(hcd)) {
4707                 if (!buf && (urb->transfer_dma & 3)) {
4708                         dev_err(hsotg->dev,
4709                                 "%s: unaligned transfer with no transfer_buffer",
4710                                 __func__);
4711                         retval = -EINVAL;
4712                         goto fail0;
4713                 }
4714         }
4715
4716         if (!(urb->transfer_flags & URB_NO_INTERRUPT))
4717                 tflags |= URB_GIVEBACK_ASAP;
4718         if (urb->transfer_flags & URB_ZERO_PACKET)
4719                 tflags |= URB_SEND_ZERO_PACKET;
4720
4721         dwc2_urb->priv = urb;
4722         dwc2_urb->buf = buf;
4723         dwc2_urb->dma = urb->transfer_dma;
4724         dwc2_urb->length = urb->transfer_buffer_length;
4725         dwc2_urb->setup_packet = urb->setup_packet;
4726         dwc2_urb->setup_dma = urb->setup_dma;
4727         dwc2_urb->flags = tflags;
4728         dwc2_urb->interval = urb->interval;
4729         dwc2_urb->status = -EINPROGRESS;
4730
4731         for (i = 0; i < urb->number_of_packets; ++i)
4732                 dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i,
4733                                                  urb->iso_frame_desc[i].offset,
4734                                                  urb->iso_frame_desc[i].length);
4735
4736         urb->hcpriv = dwc2_urb;
4737         qh = (struct dwc2_qh *)ep->hcpriv;
4738         /* Create QH for the endpoint if it doesn't exist */
4739         if (!qh) {
4740                 qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags);
4741                 if (!qh) {
4742                         retval = -ENOMEM;
4743                         goto fail0;
4744                 }
4745                 ep->hcpriv = qh;
4746                 qh_allocated = true;
4747         }
4748
4749         qtd = kzalloc(sizeof(*qtd), mem_flags);
4750         if (!qtd) {
4751                 retval = -ENOMEM;
4752                 goto fail1;
4753         }
4754
4755         spin_lock_irqsave(&hsotg->lock, flags);
4756         retval = usb_hcd_link_urb_to_ep(hcd, urb);
4757         if (retval)
4758                 goto fail2;
4759
4760         retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd);
4761         if (retval)
4762                 goto fail3;
4763
4764         if (alloc_bandwidth) {
4765                 dwc2_allocate_bus_bandwidth(hcd,
4766                                 dwc2_hcd_get_ep_bandwidth(hsotg, ep),
4767                                 urb);
4768         }
4769
4770         spin_unlock_irqrestore(&hsotg->lock, flags);
4771
4772         return 0;
4773
4774 fail3:
4775         dwc2_urb->priv = NULL;
4776         usb_hcd_unlink_urb_from_ep(hcd, urb);
4777         if (qh_allocated && qh->channel && qh->channel->qh == qh)
4778                 qh->channel->qh = NULL;
4779 fail2:
4780         urb->hcpriv = NULL;
4781         spin_unlock_irqrestore(&hsotg->lock, flags);
4782         kfree(qtd);
4783 fail1:
4784         if (qh_allocated) {
4785                 struct dwc2_qtd *qtd2, *qtd2_tmp;
4786
4787                 ep->hcpriv = NULL;
4788                 dwc2_hcd_qh_unlink(hsotg, qh);
4789                 /* Free each QTD in the QH's QTD list */
4790                 list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list,
4791                                          qtd_list_entry)
4792                         dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh);
4793                 dwc2_hcd_qh_free(hsotg, qh);
4794         }
4795 fail0:
4796         kfree(dwc2_urb);
4797
4798         return retval;
4799 }
4800
4801 /*
4802  * Aborts/cancels a USB transfer request. Always returns 0 to indicate success.
4803  */
4804 static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
4805                                  int status)
4806 {
4807         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4808         int rc;
4809         unsigned long flags;
4810
4811         dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n");
4812         dwc2_dump_urb_info(hcd, urb, "urb_dequeue");
4813
4814         spin_lock_irqsave(&hsotg->lock, flags);
4815
4816         rc = usb_hcd_check_unlink_urb(hcd, urb, status);
4817         if (rc)
4818                 goto out;
4819
4820         if (!urb->hcpriv) {
4821                 dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
4822                 goto out;
4823         }
4824
4825         rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv);
4826
4827         usb_hcd_unlink_urb_from_ep(hcd, urb);
4828
4829         kfree(urb->hcpriv);
4830         urb->hcpriv = NULL;
4831
4832         /* Higher layer software sets URB status */
4833         spin_unlock(&hsotg->lock);
4834         usb_hcd_giveback_urb(hcd, urb, status);
4835         spin_lock(&hsotg->lock);
4836
4837         dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n");
4838         dev_dbg(hsotg->dev, "  urb->status = %d\n", urb->status);
4839 out:
4840         spin_unlock_irqrestore(&hsotg->lock, flags);
4841
4842         return rc;
4843 }
4844
4845 /*
4846  * Frees resources in the DWC_otg controller related to a given endpoint. Also
4847  * clears state in the HCD related to the endpoint. Any URBs for the endpoint
4848  * must already be dequeued.
4849  */
4850 static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd,
4851                                        struct usb_host_endpoint *ep)
4852 {
4853         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4854
4855         dev_dbg(hsotg->dev,
4856                 "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n",
4857                 ep->desc.bEndpointAddress, ep->hcpriv);
4858         dwc2_hcd_endpoint_disable(hsotg, ep, 250);
4859 }
4860
4861 /*
4862  * Resets endpoint specific parameter values, in current version used to reset
4863  * the data toggle (as a WA). This function can be called from usb_clear_halt
4864  * routine.
4865  */
4866 static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd,
4867                                      struct usb_host_endpoint *ep)
4868 {
4869         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4870         unsigned long flags;
4871
4872         dev_dbg(hsotg->dev,
4873                 "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n",
4874                 ep->desc.bEndpointAddress);
4875
4876         spin_lock_irqsave(&hsotg->lock, flags);
4877         dwc2_hcd_endpoint_reset(hsotg, ep);
4878         spin_unlock_irqrestore(&hsotg->lock, flags);
4879 }
4880
4881 /*
4882  * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
4883  * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
4884  * interrupt.
4885  *
4886  * This function is called by the USB core when an interrupt occurs
4887  */
4888 static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd)
4889 {
4890         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4891
4892         return dwc2_handle_hcd_intr(hsotg);
4893 }
4894
4895 /*
4896  * Creates Status Change bitmap for the root hub and root port. The bitmap is
4897  * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
4898  * is the status change indicator for the single root port. Returns 1 if either
4899  * change indicator is 1, otherwise returns 0.
4900  */
4901 static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
4902 {
4903         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4904
4905         buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1;
4906         return buf[0] != 0;
4907 }
4908
4909 /* Handles hub class-specific requests */
4910 static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue,
4911                                  u16 windex, char *buf, u16 wlength)
4912 {
4913         int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq,
4914                                           wvalue, windex, buf, wlength);
4915         return retval;
4916 }
4917
4918 /* Handles hub TT buffer clear completions */
4919 static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd,
4920                                                struct usb_host_endpoint *ep)
4921 {
4922         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4923         struct dwc2_qh *qh;
4924         unsigned long flags;
4925
4926         qh = ep->hcpriv;
4927         if (!qh)
4928                 return;
4929
4930         spin_lock_irqsave(&hsotg->lock, flags);
4931         qh->tt_buffer_dirty = 0;
4932
4933         if (hsotg->flags.b.port_connect_status)
4934                 dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL);
4935
4936         spin_unlock_irqrestore(&hsotg->lock, flags);
4937 }
4938
4939 /*
4940  * HPRT0_SPD_HIGH_SPEED: high speed
4941  * HPRT0_SPD_FULL_SPEED: full speed
4942  */
4943 static void dwc2_change_bus_speed(struct usb_hcd *hcd, int speed)
4944 {
4945         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4946
4947         if (hsotg->params.speed == speed)
4948                 return;
4949
4950         hsotg->params.speed = speed;
4951         queue_work(hsotg->wq_otg, &hsotg->wf_otg);
4952 }
4953
4954 static void dwc2_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
4955 {
4956         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4957
4958         if (!hsotg->params.change_speed_quirk)
4959                 return;
4960
4961         /*
4962          * On removal, set speed to default high-speed.
4963          */
4964         if (udev->parent && udev->parent->speed > USB_SPEED_UNKNOWN &&
4965             udev->parent->speed < USB_SPEED_HIGH) {
4966                 dev_info(hsotg->dev, "Set speed to default high-speed\n");
4967                 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED);
4968         }
4969 }
4970
4971 static int dwc2_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
4972 {
4973         struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4974
4975         if (!hsotg->params.change_speed_quirk)
4976                 return 0;
4977
4978         if (udev->speed == USB_SPEED_HIGH) {
4979                 dev_info(hsotg->dev, "Set speed to high-speed\n");
4980                 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED);
4981         } else if ((udev->speed == USB_SPEED_FULL ||
4982                                 udev->speed == USB_SPEED_LOW)) {
4983                 /*
4984                  * Change speed setting to full-speed if there's
4985                  * a full-speed or low-speed device plugged in.
4986                  */
4987                 dev_info(hsotg->dev, "Set speed to full-speed\n");
4988                 dwc2_change_bus_speed(hcd, HPRT0_SPD_FULL_SPEED);
4989         }
4990
4991         return 0;
4992 }
4993
4994 static struct hc_driver dwc2_hc_driver = {
4995         .description = "dwc2_hsotg",
4996         .product_desc = "DWC OTG Controller",
4997         .hcd_priv_size = sizeof(struct wrapper_priv_data),
4998
4999         .irq = _dwc2_hcd_irq,
5000         .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
5001
5002         .start = _dwc2_hcd_start,
5003         .stop = _dwc2_hcd_stop,
5004         .urb_enqueue = _dwc2_hcd_urb_enqueue,
5005         .urb_dequeue = _dwc2_hcd_urb_dequeue,
5006         .endpoint_disable = _dwc2_hcd_endpoint_disable,
5007         .endpoint_reset = _dwc2_hcd_endpoint_reset,
5008         .get_frame_number = _dwc2_hcd_get_frame_number,
5009
5010         .hub_status_data = _dwc2_hcd_hub_status_data,
5011         .hub_control = _dwc2_hcd_hub_control,
5012         .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete,
5013
5014         .bus_suspend = _dwc2_hcd_suspend,
5015         .bus_resume = _dwc2_hcd_resume,
5016
5017         .map_urb_for_dma        = dwc2_map_urb_for_dma,
5018         .unmap_urb_for_dma      = dwc2_unmap_urb_for_dma,
5019 };
5020
5021 /*
5022  * Frees secondary storage associated with the dwc2_hsotg structure contained
5023  * in the struct usb_hcd field
5024  */
5025 static void dwc2_hcd_free(struct dwc2_hsotg *hsotg)
5026 {
5027         u32 ahbcfg;
5028         u32 dctl;
5029         int i;
5030
5031         dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n");
5032
5033         /* Free memory for QH/QTD lists */
5034         dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive);
5035         dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_waiting);
5036         dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active);
5037         dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive);
5038         dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready);
5039         dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned);
5040         dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued);
5041
5042         /* Free memory for the host channels */
5043         for (i = 0; i < MAX_EPS_CHANNELS; i++) {
5044                 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i];
5045
5046                 if (chan) {
5047                         dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n",
5048                                 i, chan);
5049                         hsotg->hc_ptr_array[i] = NULL;
5050                         kfree(chan);
5051                 }
5052         }
5053
5054         if (hsotg->params.host_dma) {
5055                 if (hsotg->status_buf) {
5056                         dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE,
5057                                           hsotg->status_buf,
5058                                           hsotg->status_buf_dma);
5059                         hsotg->status_buf = NULL;
5060                 }
5061         } else {
5062                 kfree(hsotg->status_buf);
5063                 hsotg->status_buf = NULL;
5064         }
5065
5066         ahbcfg = dwc2_readl(hsotg, GAHBCFG);
5067
5068         /* Disable all interrupts */
5069         ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
5070         dwc2_writel(hsotg, ahbcfg, GAHBCFG);
5071         dwc2_writel(hsotg, 0, GINTMSK);
5072
5073         if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) {
5074                 dctl = dwc2_readl(hsotg, DCTL);
5075                 dctl |= DCTL_SFTDISCON;
5076                 dwc2_writel(hsotg, dctl, DCTL);
5077         }
5078
5079         if (hsotg->wq_otg) {
5080                 if (!cancel_work_sync(&hsotg->wf_otg))
5081                         flush_workqueue(hsotg->wq_otg);
5082                 destroy_workqueue(hsotg->wq_otg);
5083         }
5084
5085         cancel_work_sync(&hsotg->phy_reset_work);
5086
5087         del_timer(&hsotg->wkp_timer);
5088 }
5089
5090 static void dwc2_hcd_release(struct dwc2_hsotg *hsotg)
5091 {
5092         /* Turn off all host-specific interrupts */
5093         dwc2_disable_host_interrupts(hsotg);
5094
5095         dwc2_hcd_free(hsotg);
5096 }
5097
5098 /*
5099  * Initializes the HCD. This function allocates memory for and initializes the
5100  * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the
5101  * USB bus with the core and calls the hc_driver->start() function. It returns
5102  * a negative error on failure.
5103  */
5104 int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
5105 {
5106         struct platform_device *pdev = to_platform_device(hsotg->dev);
5107         struct resource *res;
5108         struct usb_hcd *hcd;
5109         struct dwc2_host_chan *channel;
5110         u32 hcfg;
5111         int i, num_channels;
5112         int retval;
5113
5114         if (usb_disabled())
5115                 return -ENODEV;
5116
5117         dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n");
5118
5119         retval = -ENOMEM;
5120
5121         hcfg = dwc2_readl(hsotg, HCFG);
5122         dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg);
5123
5124 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
5125         hsotg->frame_num_array = kcalloc(FRAME_NUM_ARRAY_SIZE,
5126                                          sizeof(*hsotg->frame_num_array),
5127                                          GFP_KERNEL);
5128         if (!hsotg->frame_num_array)
5129                 goto error1;
5130         hsotg->last_frame_num_array =
5131                 kcalloc(FRAME_NUM_ARRAY_SIZE,
5132                         sizeof(*hsotg->last_frame_num_array), GFP_KERNEL);
5133         if (!hsotg->last_frame_num_array)
5134                 goto error1;
5135 #endif
5136         hsotg->last_frame_num = HFNUM_MAX_FRNUM;
5137
5138         /* Check if the bus driver or platform code has setup a dma_mask */
5139         if (hsotg->params.host_dma &&
5140             !hsotg->dev->dma_mask) {
5141                 dev_warn(hsotg->dev,
5142                          "dma_mask not set, disabling DMA\n");
5143                 hsotg->params.host_dma = false;
5144                 hsotg->params.dma_desc_enable = false;
5145         }
5146
5147         /* Set device flags indicating whether the HCD supports DMA */
5148         if (hsotg->params.host_dma) {
5149                 if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0)
5150                         dev_warn(hsotg->dev, "can't set DMA mask\n");
5151                 if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0)
5152                         dev_warn(hsotg->dev, "can't set coherent DMA mask\n");
5153         }
5154
5155         if (hsotg->params.change_speed_quirk) {
5156                 dwc2_hc_driver.free_dev = dwc2_free_dev;
5157                 dwc2_hc_driver.reset_device = dwc2_reset_device;
5158         }
5159
5160         if (hsotg->params.host_dma)
5161                 dwc2_hc_driver.flags |= HCD_DMA;
5162
5163         hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev));
5164         if (!hcd)
5165                 goto error1;
5166
5167         hcd->has_tt = 1;
5168
5169         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
5170         if (!res) {
5171                 retval = -EINVAL;
5172                 goto error2;
5173         }
5174         hcd->rsrc_start = res->start;
5175         hcd->rsrc_len = resource_size(res);
5176
5177         ((struct wrapper_priv_data *)&hcd->hcd_priv)->hsotg = hsotg;
5178         hsotg->priv = hcd;
5179
5180         /*
5181          * Disable the global interrupt until all the interrupt handlers are
5182          * installed
5183          */
5184         dwc2_disable_global_interrupts(hsotg);
5185
5186         /* Initialize the DWC_otg core, and select the Phy type */
5187         retval = dwc2_core_init(hsotg, true);
5188         if (retval)
5189                 goto error2;
5190
5191         /* Create new workqueue and init work */
5192         retval = -ENOMEM;
5193         hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0);
5194         if (!hsotg->wq_otg) {
5195                 dev_err(hsotg->dev, "Failed to create workqueue\n");
5196                 goto error2;
5197         }
5198         INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change);
5199
5200         timer_setup(&hsotg->wkp_timer, dwc2_wakeup_detected, 0);
5201
5202         /* Initialize the non-periodic schedule */
5203         INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive);
5204         INIT_LIST_HEAD(&hsotg->non_periodic_sched_waiting);
5205         INIT_LIST_HEAD(&hsotg->non_periodic_sched_active);
5206
5207         /* Initialize the periodic schedule */
5208         INIT_LIST_HEAD(&hsotg->periodic_sched_inactive);
5209         INIT_LIST_HEAD(&hsotg->periodic_sched_ready);
5210         INIT_LIST_HEAD(&hsotg->periodic_sched_assigned);
5211         INIT_LIST_HEAD(&hsotg->periodic_sched_queued);
5212
5213         INIT_LIST_HEAD(&hsotg->split_order);
5214
5215         /*
5216          * Create a host channel descriptor for each host channel implemented
5217          * in the controller. Initialize the channel descriptor array.
5218          */
5219         INIT_LIST_HEAD(&hsotg->free_hc_list);
5220         num_channels = hsotg->params.host_channels;
5221         memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array));
5222
5223         for (i = 0; i < num_channels; i++) {
5224                 channel = kzalloc(sizeof(*channel), GFP_KERNEL);
5225                 if (!channel)
5226                         goto error3;
5227                 channel->hc_num = i;
5228                 INIT_LIST_HEAD(&channel->split_order_list_entry);
5229                 hsotg->hc_ptr_array[i] = channel;
5230         }
5231
5232         /* Initialize work */
5233         INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func);
5234         INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func);
5235         INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func);
5236
5237         /*
5238          * Allocate space for storing data on status transactions. Normally no
5239          * data is sent, but this space acts as a bit bucket. This must be
5240          * done after usb_add_hcd since that function allocates the DMA buffer
5241          * pool.
5242          */
5243         if (hsotg->params.host_dma)
5244                 hsotg->status_buf = dma_alloc_coherent(hsotg->dev,
5245                                         DWC2_HCD_STATUS_BUF_SIZE,
5246                                         &hsotg->status_buf_dma, GFP_KERNEL);
5247         else
5248                 hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE,
5249                                           GFP_KERNEL);
5250
5251         if (!hsotg->status_buf)
5252                 goto error3;
5253
5254         /*
5255          * Create kmem caches to handle descriptor buffers in descriptor
5256          * DMA mode.
5257          * Alignment must be set to 512 bytes.
5258          */
5259         if (hsotg->params.dma_desc_enable ||
5260             hsotg->params.dma_desc_fs_enable) {
5261                 hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc",
5262                                 sizeof(struct dwc2_dma_desc) *
5263                                 MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA,
5264                                 NULL);
5265                 if (!hsotg->desc_gen_cache) {
5266                         dev_err(hsotg->dev,
5267                                 "unable to create dwc2 generic desc cache\n");
5268
5269                         /*
5270                          * Disable descriptor dma mode since it will not be
5271                          * usable.
5272                          */
5273                         hsotg->params.dma_desc_enable = false;
5274                         hsotg->params.dma_desc_fs_enable = false;
5275                 }
5276
5277                 hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc",
5278                                 sizeof(struct dwc2_dma_desc) *
5279                                 MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL);
5280                 if (!hsotg->desc_hsisoc_cache) {
5281                         dev_err(hsotg->dev,
5282                                 "unable to create dwc2 hs isoc desc cache\n");
5283
5284                         kmem_cache_destroy(hsotg->desc_gen_cache);
5285
5286                         /*
5287                          * Disable descriptor dma mode since it will not be
5288                          * usable.
5289                          */
5290                         hsotg->params.dma_desc_enable = false;
5291                         hsotg->params.dma_desc_fs_enable = false;
5292                 }
5293         }
5294
5295         if (hsotg->params.host_dma) {
5296                 /*
5297                  * Create kmem caches to handle non-aligned buffer
5298                  * in Buffer DMA mode.
5299                  */
5300                 hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma",
5301                                                 DWC2_KMEM_UNALIGNED_BUF_SIZE, 4,
5302                                                 SLAB_CACHE_DMA, NULL);
5303                 if (!hsotg->unaligned_cache)
5304                         dev_err(hsotg->dev,
5305                                 "unable to create dwc2 unaligned cache\n");
5306         }
5307
5308         hsotg->otg_port = 1;
5309         hsotg->frame_list = NULL;
5310         hsotg->frame_list_dma = 0;
5311         hsotg->periodic_qh_count = 0;
5312
5313         /* Initiate lx_state to L3 disconnected state */
5314         hsotg->lx_state = DWC2_L3;
5315
5316         hcd->self.otg_port = hsotg->otg_port;
5317
5318         /* Don't support SG list at this point */
5319         hcd->self.sg_tablesize = 0;
5320
5321         hcd->tpl_support = of_usb_host_tpl_support(hsotg->dev->of_node);
5322
5323         if (!IS_ERR_OR_NULL(hsotg->uphy))
5324                 otg_set_host(hsotg->uphy->otg, &hcd->self);
5325
5326         /*
5327          * Finish generic HCD initialization and start the HCD. This function
5328          * allocates the DMA buffer pool, registers the USB bus, requests the
5329          * IRQ line, and calls hcd_start method.
5330          */
5331         retval = usb_add_hcd(hcd, hsotg->irq, IRQF_SHARED);
5332         if (retval < 0)
5333                 goto error4;
5334
5335         device_wakeup_enable(hcd->self.controller);
5336
5337         dwc2_hcd_dump_state(hsotg);
5338
5339         dwc2_enable_global_interrupts(hsotg);
5340
5341         return 0;
5342
5343 error4:
5344         kmem_cache_destroy(hsotg->unaligned_cache);
5345         kmem_cache_destroy(hsotg->desc_hsisoc_cache);
5346         kmem_cache_destroy(hsotg->desc_gen_cache);
5347 error3:
5348         dwc2_hcd_release(hsotg);
5349 error2:
5350         usb_put_hcd(hcd);
5351 error1:
5352
5353 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
5354         kfree(hsotg->last_frame_num_array);
5355         kfree(hsotg->frame_num_array);
5356 #endif
5357
5358         dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval);
5359         return retval;
5360 }
5361
5362 /*
5363  * Removes the HCD.
5364  * Frees memory and resources associated with the HCD and deregisters the bus.
5365  */
5366 void dwc2_hcd_remove(struct dwc2_hsotg *hsotg)
5367 {
5368         struct usb_hcd *hcd;
5369
5370         dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n");
5371
5372         hcd = dwc2_hsotg_to_hcd(hsotg);
5373         dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd);
5374
5375         if (!hcd) {
5376                 dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n",
5377                         __func__);
5378                 return;
5379         }
5380
5381         if (!IS_ERR_OR_NULL(hsotg->uphy))
5382                 otg_set_host(hsotg->uphy->otg, NULL);
5383
5384         usb_remove_hcd(hcd);
5385         hsotg->priv = NULL;
5386
5387         kmem_cache_destroy(hsotg->unaligned_cache);
5388         kmem_cache_destroy(hsotg->desc_hsisoc_cache);
5389         kmem_cache_destroy(hsotg->desc_gen_cache);
5390
5391         dwc2_hcd_release(hsotg);
5392         usb_put_hcd(hcd);
5393
5394 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
5395         kfree(hsotg->last_frame_num_array);
5396         kfree(hsotg->frame_num_array);
5397 #endif
5398 }
5399
5400 /**
5401  * dwc2_backup_host_registers() - Backup controller host registers.
5402  * When suspending usb bus, registers needs to be backuped
5403  * if controller power is disabled once suspended.
5404  *
5405  * @hsotg: Programming view of the DWC_otg controller
5406  */
5407 int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
5408 {
5409         struct dwc2_hregs_backup *hr;
5410         int i;
5411
5412         dev_dbg(hsotg->dev, "%s\n", __func__);
5413
5414         /* Backup Host regs */
5415         hr = &hsotg->hr_backup;
5416         hr->hcfg = dwc2_readl(hsotg, HCFG);
5417         hr->hflbaddr = dwc2_readl(hsotg, HFLBADDR);
5418         hr->haintmsk = dwc2_readl(hsotg, HAINTMSK);
5419         for (i = 0; i < hsotg->params.host_channels; ++i) {
5420                 hr->hcchar[i] = dwc2_readl(hsotg, HCCHAR(i));
5421                 hr->hcsplt[i] = dwc2_readl(hsotg, HCSPLT(i));
5422                 hr->hcintmsk[i] = dwc2_readl(hsotg, HCINTMSK(i));
5423                 hr->hctsiz[i] = dwc2_readl(hsotg, HCTSIZ(i));
5424                 hr->hcidma[i] = dwc2_readl(hsotg, HCDMA(i));
5425                 hr->hcidmab[i] = dwc2_readl(hsotg, HCDMAB(i));
5426         }
5427
5428         hr->hprt0 = dwc2_read_hprt0(hsotg);
5429         hr->hfir = dwc2_readl(hsotg, HFIR);
5430         hr->hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ);
5431         hr->valid = true;
5432
5433         return 0;
5434 }
5435
5436 /**
5437  * dwc2_restore_host_registers() - Restore controller host registers.
5438  * When resuming usb bus, device registers needs to be restored
5439  * if controller power were disabled.
5440  *
5441  * @hsotg: Programming view of the DWC_otg controller
5442  */
5443 int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
5444 {
5445         struct dwc2_hregs_backup *hr;
5446         int i;
5447
5448         dev_dbg(hsotg->dev, "%s\n", __func__);
5449
5450         /* Restore host regs */
5451         hr = &hsotg->hr_backup;
5452         if (!hr->valid) {
5453                 dev_err(hsotg->dev, "%s: no host registers to restore\n",
5454                         __func__);
5455                 return -EINVAL;
5456         }
5457         hr->valid = false;
5458
5459         dwc2_writel(hsotg, hr->hcfg, HCFG);
5460         dwc2_writel(hsotg, hr->hflbaddr, HFLBADDR);
5461         dwc2_writel(hsotg, hr->haintmsk, HAINTMSK);
5462
5463         for (i = 0; i < hsotg->params.host_channels; ++i) {
5464                 dwc2_writel(hsotg, hr->hcchar[i], HCCHAR(i));
5465                 dwc2_writel(hsotg, hr->hcsplt[i], HCSPLT(i));
5466                 dwc2_writel(hsotg, hr->hcintmsk[i], HCINTMSK(i));
5467                 dwc2_writel(hsotg, hr->hctsiz[i], HCTSIZ(i));
5468                 dwc2_writel(hsotg, hr->hcidma[i], HCDMA(i));
5469                 dwc2_writel(hsotg, hr->hcidmab[i], HCDMAB(i));
5470         }
5471
5472         dwc2_writel(hsotg, hr->hprt0, HPRT0);
5473         dwc2_writel(hsotg, hr->hfir, HFIR);
5474         dwc2_writel(hsotg, hr->hptxfsiz, HPTXFSIZ);
5475         hsotg->frame_number = 0;
5476
5477         return 0;
5478 }
5479
5480 /**
5481  * dwc2_host_enter_hibernation() - Put controller in Hibernation.
5482  *
5483  * @hsotg: Programming view of the DWC_otg controller
5484  */
5485 int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg)
5486 {
5487         unsigned long flags;
5488         int ret = 0;
5489         u32 hprt0;
5490         u32 pcgcctl;
5491         u32 gusbcfg;
5492         u32 gpwrdn;
5493
5494         dev_dbg(hsotg->dev, "Preparing host for hibernation\n");
5495         ret = dwc2_backup_global_registers(hsotg);
5496         if (ret) {
5497                 dev_err(hsotg->dev, "%s: failed to backup global registers\n",
5498                         __func__);
5499                 return ret;
5500         }
5501         ret = dwc2_backup_host_registers(hsotg);
5502         if (ret) {
5503                 dev_err(hsotg->dev, "%s: failed to backup host registers\n",
5504                         __func__);
5505                 return ret;
5506         }
5507
5508         /* Enter USB Suspend Mode */
5509         hprt0 = dwc2_readl(hsotg, HPRT0);
5510         hprt0 |= HPRT0_SUSP;
5511         hprt0 &= ~HPRT0_ENA;
5512         dwc2_writel(hsotg, hprt0, HPRT0);
5513
5514         /* Wait for the HPRT0.PrtSusp register field to be set */
5515         if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000))
5516                 dev_warn(hsotg->dev, "Suspend wasn't generated\n");
5517
5518         /*
5519          * We need to disable interrupts to prevent servicing of any IRQ
5520          * during going to hibernation
5521          */
5522         spin_lock_irqsave(&hsotg->lock, flags);
5523         hsotg->lx_state = DWC2_L2;
5524
5525         gusbcfg = dwc2_readl(hsotg, GUSBCFG);
5526         if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) {
5527                 /* ULPI interface */
5528                 /* Suspend the Phy Clock */
5529                 pcgcctl = dwc2_readl(hsotg, PCGCTL);
5530                 pcgcctl |= PCGCTL_STOPPCLK;
5531                 dwc2_writel(hsotg, pcgcctl, PCGCTL);
5532                 udelay(10);
5533
5534                 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5535                 gpwrdn |= GPWRDN_PMUACTV;
5536                 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5537                 udelay(10);
5538         } else {
5539                 /* UTMI+ Interface */
5540                 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5541                 gpwrdn |= GPWRDN_PMUACTV;
5542                 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5543                 udelay(10);
5544
5545                 pcgcctl = dwc2_readl(hsotg, PCGCTL);
5546                 pcgcctl |= PCGCTL_STOPPCLK;
5547                 dwc2_writel(hsotg, pcgcctl, PCGCTL);
5548                 udelay(10);
5549         }
5550
5551         /* Enable interrupts from wake up logic */
5552         gpwrdn = dwc2_readl(hsotg, GPWRDN);
5553         gpwrdn |= GPWRDN_PMUINTSEL;
5554         dwc2_writel(hsotg, gpwrdn, GPWRDN);
5555         udelay(10);
5556
5557         /* Unmask host mode interrupts in GPWRDN */
5558         gpwrdn = dwc2_readl(hsotg, GPWRDN);
5559         gpwrdn |= GPWRDN_DISCONN_DET_MSK;
5560         gpwrdn |= GPWRDN_LNSTSCHG_MSK;
5561         gpwrdn |= GPWRDN_STS_CHGINT_MSK;
5562         dwc2_writel(hsotg, gpwrdn, GPWRDN);
5563         udelay(10);
5564
5565         /* Enable Power Down Clamp */
5566         gpwrdn = dwc2_readl(hsotg, GPWRDN);
5567         gpwrdn |= GPWRDN_PWRDNCLMP;
5568         dwc2_writel(hsotg, gpwrdn, GPWRDN);
5569         udelay(10);
5570
5571         /* Switch off VDD */
5572         gpwrdn = dwc2_readl(hsotg, GPWRDN);
5573         gpwrdn |= GPWRDN_PWRDNSWTCH;
5574         dwc2_writel(hsotg, gpwrdn, GPWRDN);
5575
5576         hsotg->hibernated = 1;
5577         hsotg->bus_suspended = 1;
5578         dev_dbg(hsotg->dev, "Host hibernation completed\n");
5579         spin_unlock_irqrestore(&hsotg->lock, flags);
5580         return ret;
5581 }
5582
5583 /*
5584  * dwc2_host_exit_hibernation()
5585  *
5586  * @hsotg: Programming view of the DWC_otg controller
5587  * @rem_wakeup: indicates whether resume is initiated by Device or Host.
5588  * @param reset: indicates whether resume is initiated by Reset.
5589  *
5590  * Return: non-zero if failed to enter to hibernation.
5591  *
5592  * This function is for exiting from Host mode hibernation by
5593  * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
5594  */
5595 int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
5596                                int reset)
5597 {
5598         u32 gpwrdn;
5599         u32 hprt0;
5600         int ret = 0;
5601         struct dwc2_gregs_backup *gr;
5602         struct dwc2_hregs_backup *hr;
5603
5604         gr = &hsotg->gr_backup;
5605         hr = &hsotg->hr_backup;
5606
5607         dev_dbg(hsotg->dev,
5608                 "%s: called with rem_wakeup = %d reset = %d\n",
5609                 __func__, rem_wakeup, reset);
5610
5611         dwc2_hib_restore_common(hsotg, rem_wakeup, 1);
5612         hsotg->hibernated = 0;
5613
5614         /*
5615          * This step is not described in functional spec but if not wait for
5616          * this delay, mismatch interrupts occurred because just after restore
5617          * core is in Device mode(gintsts.curmode == 0)
5618          */
5619         mdelay(100);
5620
5621         /* Clear all pending interupts */
5622         dwc2_writel(hsotg, 0xffffffff, GINTSTS);
5623
5624         /* De-assert Restore */
5625         gpwrdn = dwc2_readl(hsotg, GPWRDN);
5626         gpwrdn &= ~GPWRDN_RESTORE;
5627         dwc2_writel(hsotg, gpwrdn, GPWRDN);
5628         udelay(10);
5629
5630         /* Restore GUSBCFG, HCFG */
5631         dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
5632         dwc2_writel(hsotg, hr->hcfg, HCFG);
5633
5634         /* De-assert Wakeup Logic */
5635         if (!(rem_wakeup && hsotg->hw_params.snpsid >= DWC2_CORE_REV_4_30a)) {
5636                 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5637                 gpwrdn &= ~GPWRDN_PMUACTV;
5638                 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5639                 udelay(10);
5640         }
5641
5642         hprt0 = hr->hprt0;
5643         hprt0 |= HPRT0_PWR;
5644         hprt0 &= ~HPRT0_ENA;
5645         hprt0 &= ~HPRT0_SUSP;
5646         dwc2_writel(hsotg, hprt0, HPRT0);
5647
5648         hprt0 = hr->hprt0;
5649         hprt0 |= HPRT0_PWR;
5650         hprt0 &= ~HPRT0_ENA;
5651         hprt0 &= ~HPRT0_SUSP;
5652
5653         if (reset) {
5654                 hprt0 |= HPRT0_RST;
5655                 dwc2_writel(hsotg, hprt0, HPRT0);
5656
5657                 /* Wait for Resume time and then program HPRT again */
5658                 mdelay(60);
5659                 hprt0 &= ~HPRT0_RST;
5660                 dwc2_writel(hsotg, hprt0, HPRT0);
5661         } else {
5662                 hprt0 |= HPRT0_RES;
5663                 dwc2_writel(hsotg, hprt0, HPRT0);
5664
5665                 /* De-assert Wakeup Logic */
5666                 if ((rem_wakeup && hsotg->hw_params.snpsid >= DWC2_CORE_REV_4_30a)) {
5667                         gpwrdn = dwc2_readl(hsotg, GPWRDN);
5668                         gpwrdn &= ~GPWRDN_PMUACTV;
5669                         dwc2_writel(hsotg, gpwrdn, GPWRDN);
5670                         udelay(10);
5671                 }
5672                 /* Wait for Resume time and then program HPRT again */
5673                 mdelay(100);
5674                 hprt0 &= ~HPRT0_RES;
5675                 dwc2_writel(hsotg, hprt0, HPRT0);
5676         }
5677         /* Clear all interrupt status */
5678         hprt0 = dwc2_readl(hsotg, HPRT0);
5679         hprt0 |= HPRT0_CONNDET;
5680         hprt0 |= HPRT0_ENACHG;
5681         hprt0 &= ~HPRT0_ENA;
5682         dwc2_writel(hsotg, hprt0, HPRT0);
5683
5684         hprt0 = dwc2_readl(hsotg, HPRT0);
5685
5686         /* Clear all pending interupts */
5687         dwc2_writel(hsotg, 0xffffffff, GINTSTS);
5688
5689         /* Restore global registers */
5690         ret = dwc2_restore_global_registers(hsotg);
5691         if (ret) {
5692                 dev_err(hsotg->dev, "%s: failed to restore registers\n",
5693                         __func__);
5694                 return ret;
5695         }
5696
5697         /* Restore host registers */
5698         ret = dwc2_restore_host_registers(hsotg);
5699         if (ret) {
5700                 dev_err(hsotg->dev, "%s: failed to restore host registers\n",
5701                         __func__);
5702                 return ret;
5703         }
5704
5705         if (rem_wakeup) {
5706                 dwc2_hcd_rem_wakeup(hsotg);
5707                 /*
5708                  * Change "port_connect_status_change" flag to re-enumerate,
5709                  * because after exit from hibernation port connection status
5710                  * is not detected.
5711                  */
5712                 hsotg->flags.b.port_connect_status_change = 1;
5713         }
5714
5715         hsotg->hibernated = 0;
5716         hsotg->bus_suspended = 0;
5717         hsotg->lx_state = DWC2_L0;
5718         dev_dbg(hsotg->dev, "Host hibernation restore complete\n");
5719         return ret;
5720 }
5721
5722 bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2)
5723 {
5724         struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub;
5725
5726         /* If the controller isn't allowed to wakeup then we can power off. */
5727         if (!device_may_wakeup(dwc2->dev))
5728                 return true;
5729
5730         /*
5731          * We don't want to power off the PHY if something under the
5732          * root hub has wakeup enabled.
5733          */
5734         if (usb_wakeup_enabled_descendants(root_hub))
5735                 return false;
5736
5737         /* No reason to keep the PHY powered, so allow poweroff */
5738         return true;
5739 }
5740
5741 /**
5742  * dwc2_host_enter_partial_power_down() - Put controller in partial
5743  * power down.
5744  *
5745  * @hsotg: Programming view of the DWC_otg controller
5746  *
5747  * Return: non-zero if failed to enter host partial power down.
5748  *
5749  * This function is for entering Host mode partial power down.
5750  */
5751 int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg)
5752 {
5753         u32 pcgcctl;
5754         u32 hprt0;
5755         int ret = 0;
5756
5757         dev_dbg(hsotg->dev, "Entering host partial power down started.\n");
5758
5759         /* Put this port in suspend mode. */
5760         hprt0 = dwc2_read_hprt0(hsotg);
5761         hprt0 |= HPRT0_SUSP;
5762         dwc2_writel(hsotg, hprt0, HPRT0);
5763         udelay(5);
5764
5765         /* Wait for the HPRT0.PrtSusp register field to be set */
5766         if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000))
5767                 dev_warn(hsotg->dev, "Suspend wasn't generated\n");
5768
5769         /* Backup all registers */
5770         ret = dwc2_backup_global_registers(hsotg);
5771         if (ret) {
5772                 dev_err(hsotg->dev, "%s: failed to backup global registers\n",
5773                         __func__);
5774                 return ret;
5775         }
5776
5777         ret = dwc2_backup_host_registers(hsotg);
5778         if (ret) {
5779                 dev_err(hsotg->dev, "%s: failed to backup host registers\n",
5780                         __func__);
5781                 return ret;
5782         }
5783
5784         /*
5785          * Clear any pending interrupts since dwc2 will not be able to
5786          * clear them after entering partial_power_down.
5787          */
5788         dwc2_writel(hsotg, 0xffffffff, GINTSTS);
5789
5790         /* Put the controller in low power state */
5791         pcgcctl = dwc2_readl(hsotg, PCGCTL);
5792
5793         pcgcctl |= PCGCTL_PWRCLMP;
5794         dwc2_writel(hsotg, pcgcctl, PCGCTL);
5795         udelay(5);
5796
5797         pcgcctl |= PCGCTL_RSTPDWNMODULE;
5798         dwc2_writel(hsotg, pcgcctl, PCGCTL);
5799         udelay(5);
5800
5801         pcgcctl |= PCGCTL_STOPPCLK;
5802         dwc2_writel(hsotg, pcgcctl, PCGCTL);
5803
5804         /* Set in_ppd flag to 1 as here core enters suspend. */
5805         hsotg->in_ppd = 1;
5806         hsotg->lx_state = DWC2_L2;
5807         hsotg->bus_suspended = true;
5808
5809         dev_dbg(hsotg->dev, "Entering host partial power down completed.\n");
5810
5811         return ret;
5812 }
5813
5814 /*
5815  * dwc2_host_exit_partial_power_down() - Exit controller from host partial
5816  * power down.
5817  *
5818  * @hsotg: Programming view of the DWC_otg controller
5819  * @rem_wakeup: indicates whether resume is initiated by Reset.
5820  * @restore: indicates whether need to restore the registers or not.
5821  *
5822  * Return: non-zero if failed to exit host partial power down.
5823  *
5824  * This function is for exiting from Host mode partial power down.
5825  */
5826 int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg,
5827                                       int rem_wakeup, bool restore)
5828 {
5829         u32 pcgcctl;
5830         int ret = 0;
5831         u32 hprt0;
5832
5833         dev_dbg(hsotg->dev, "Exiting host partial power down started.\n");
5834
5835         pcgcctl = dwc2_readl(hsotg, PCGCTL);
5836         pcgcctl &= ~PCGCTL_STOPPCLK;
5837         dwc2_writel(hsotg, pcgcctl, PCGCTL);
5838         udelay(5);
5839
5840         pcgcctl = dwc2_readl(hsotg, PCGCTL);
5841         pcgcctl &= ~PCGCTL_PWRCLMP;
5842         dwc2_writel(hsotg, pcgcctl, PCGCTL);
5843         udelay(5);
5844
5845         pcgcctl = dwc2_readl(hsotg, PCGCTL);
5846         pcgcctl &= ~PCGCTL_RSTPDWNMODULE;
5847         dwc2_writel(hsotg, pcgcctl, PCGCTL);
5848
5849         udelay(100);
5850         if (restore) {
5851                 ret = dwc2_restore_global_registers(hsotg);
5852                 if (ret) {
5853                         dev_err(hsotg->dev, "%s: failed to restore registers\n",
5854                                 __func__);
5855                         return ret;
5856                 }
5857
5858                 ret = dwc2_restore_host_registers(hsotg);
5859                 if (ret) {
5860                         dev_err(hsotg->dev, "%s: failed to restore host registers\n",
5861                                 __func__);
5862                         return ret;
5863                 }
5864         }
5865
5866         /* Drive resume signaling and exit suspend mode on the port. */
5867         hprt0 = dwc2_read_hprt0(hsotg);
5868         hprt0 |= HPRT0_RES;
5869         hprt0 &= ~HPRT0_SUSP;
5870         dwc2_writel(hsotg, hprt0, HPRT0);
5871         udelay(5);
5872
5873         if (!rem_wakeup) {
5874                 /* Stop driveing resume signaling on the port. */
5875                 hprt0 = dwc2_read_hprt0(hsotg);
5876                 hprt0 &= ~HPRT0_RES;
5877                 dwc2_writel(hsotg, hprt0, HPRT0);
5878
5879                 hsotg->bus_suspended = false;
5880         } else {
5881                 /* Turn on the port power bit. */
5882                 hprt0 = dwc2_read_hprt0(hsotg);
5883                 hprt0 |= HPRT0_PWR;
5884                 dwc2_writel(hsotg, hprt0, HPRT0);
5885
5886                 /* Connect hcd. */
5887                 dwc2_hcd_connect(hsotg);
5888
5889                 mod_timer(&hsotg->wkp_timer,
5890                           jiffies + msecs_to_jiffies(71));
5891         }
5892
5893         /* Set lx_state to and in_ppd to 0 as here core exits from suspend. */
5894         hsotg->in_ppd = 0;
5895         hsotg->lx_state = DWC2_L0;
5896
5897         dev_dbg(hsotg->dev, "Exiting host partial power down completed.\n");
5898         return ret;
5899 }
5900
5901 /**
5902  * dwc2_host_enter_clock_gating() - Put controller in clock gating.
5903  *
5904  * @hsotg: Programming view of the DWC_otg controller
5905  *
5906  * This function is for entering Host mode clock gating.
5907  */
5908 void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg)
5909 {
5910         u32 hprt0;
5911         u32 pcgctl;
5912
5913         dev_dbg(hsotg->dev, "Entering host clock gating.\n");
5914
5915         /* Put this port in suspend mode. */
5916         hprt0 = dwc2_read_hprt0(hsotg);
5917         hprt0 |= HPRT0_SUSP;
5918         dwc2_writel(hsotg, hprt0, HPRT0);
5919
5920         /* Set the Phy Clock bit as suspend is received. */
5921         pcgctl = dwc2_readl(hsotg, PCGCTL);
5922         pcgctl |= PCGCTL_STOPPCLK;
5923         dwc2_writel(hsotg, pcgctl, PCGCTL);
5924         udelay(5);
5925
5926         /* Set the Gate hclk as suspend is received. */
5927         pcgctl = dwc2_readl(hsotg, PCGCTL);
5928         pcgctl |= PCGCTL_GATEHCLK;
5929         dwc2_writel(hsotg, pcgctl, PCGCTL);
5930         udelay(5);
5931
5932         hsotg->bus_suspended = true;
5933         hsotg->lx_state = DWC2_L2;
5934 }
5935
5936 /**
5937  * dwc2_host_exit_clock_gating() - Exit controller from clock gating.
5938  *
5939  * @hsotg: Programming view of the DWC_otg controller
5940  * @rem_wakeup: indicates whether resume is initiated by remote wakeup
5941  *
5942  * This function is for exiting Host mode clock gating.
5943  */
5944 void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup)
5945 {
5946         u32 hprt0;
5947         u32 pcgctl;
5948
5949         dev_dbg(hsotg->dev, "Exiting host clock gating.\n");
5950
5951         /* Clear the Gate hclk. */
5952         pcgctl = dwc2_readl(hsotg, PCGCTL);
5953         pcgctl &= ~PCGCTL_GATEHCLK;
5954         dwc2_writel(hsotg, pcgctl, PCGCTL);
5955         udelay(5);
5956
5957         /* Phy Clock bit. */
5958         pcgctl = dwc2_readl(hsotg, PCGCTL);
5959         pcgctl &= ~PCGCTL_STOPPCLK;
5960         dwc2_writel(hsotg, pcgctl, PCGCTL);
5961         udelay(5);
5962
5963         /* Drive resume signaling and exit suspend mode on the port. */
5964         hprt0 = dwc2_read_hprt0(hsotg);
5965         hprt0 |= HPRT0_RES;
5966         hprt0 &= ~HPRT0_SUSP;
5967         dwc2_writel(hsotg, hprt0, HPRT0);
5968         udelay(5);
5969
5970         if (!rem_wakeup) {
5971                 /* In case of port resume need to wait for 40 ms */
5972                 msleep(USB_RESUME_TIMEOUT);
5973
5974                 /* Stop driveing resume signaling on the port. */
5975                 hprt0 = dwc2_read_hprt0(hsotg);
5976                 hprt0 &= ~HPRT0_RES;
5977                 dwc2_writel(hsotg, hprt0, HPRT0);
5978
5979                 hsotg->bus_suspended = false;
5980                 hsotg->lx_state = DWC2_L0;
5981         } else {
5982                 mod_timer(&hsotg->wkp_timer,
5983                           jiffies + msecs_to_jiffies(71));
5984         }
5985 }