1 // SPDX-License-Identifier: GPL-2.0+
3 * (C) Copyright Linus Torvalds 1999
4 * (C) Copyright Johannes Erdfelt 1999-2001
5 * (C) Copyright Andreas Gal 1999
6 * (C) Copyright Gregory P. Smith 1999
7 * (C) Copyright Deti Fliegl 1999
8 * (C) Copyright Randy Dunlap 2000
9 * (C) Copyright David Brownell 2000-2002
12 #include <linux/bcd.h>
13 #include <linux/module.h>
14 #include <linux/version.h>
15 #include <linux/kernel.h>
16 #include <linux/sched/task_stack.h>
17 #include <linux/slab.h>
18 #include <linux/completion.h>
19 #include <linux/utsname.h>
22 #include <linux/device.h>
23 #include <linux/dma-mapping.h>
24 #include <linux/mutex.h>
26 #include <asm/byteorder.h>
27 #include <asm/unaligned.h>
28 #include <linux/platform_device.h>
29 #include <linux/workqueue.h>
30 #include <linux/pm_runtime.h>
31 #include <linux/types.h>
32 #include <linux/genalloc.h>
34 #include <linux/kcov.h>
36 #include <linux/phy/phy.h>
37 #include <linux/usb.h>
38 #include <linux/usb/hcd.h>
39 #include <linux/usb/otg.h>
45 /*-------------------------------------------------------------------------*/
48 * USB Host Controller Driver framework
50 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
51 * HCD-specific behaviors/bugs.
53 * This does error checks, tracks devices and urbs, and delegates to a
54 * "hc_driver" only for code (and data) that really needs to know about
55 * hardware differences. That includes root hub registers, i/o queues,
56 * and so on ... but as little else as possible.
58 * Shared code includes most of the "root hub" code (these are emulated,
59 * though each HC's hardware works differently) and PCI glue, plus request
60 * tracking overhead. The HCD code should only block on spinlocks or on
61 * hardware handshaking; blocking on software events (such as other kernel
62 * threads releasing resources, or completing actions) is all generic.
64 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
65 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
66 * only by the hub driver ... and that neither should be seen or used by
67 * usb client device drivers.
69 * Contributors of ideas or unattributed patches include: David Brownell,
70 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
73 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
74 * associated cleanup. "usb_hcd" still != "usb_bus".
75 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
78 /*-------------------------------------------------------------------------*/
80 /* Keep track of which host controller drivers are loaded */
81 unsigned long usb_hcds_loaded;
82 EXPORT_SYMBOL_GPL(usb_hcds_loaded);
84 /* host controllers we manage */
85 DEFINE_IDR (usb_bus_idr);
86 EXPORT_SYMBOL_GPL (usb_bus_idr);
88 /* used when allocating bus numbers */
91 /* used when updating list of hcds */
92 DEFINE_MUTEX(usb_bus_idr_lock); /* exported only for usbfs */
93 EXPORT_SYMBOL_GPL (usb_bus_idr_lock);
95 /* used for controlling access to virtual root hubs */
96 static DEFINE_SPINLOCK(hcd_root_hub_lock);
98 /* used when updating an endpoint's URB list */
99 static DEFINE_SPINLOCK(hcd_urb_list_lock);
101 /* used to protect against unlinking URBs after the device is gone */
102 static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
104 /* wait queue for synchronous unlinks */
105 DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
107 /*-------------------------------------------------------------------------*/
110 * Sharable chunks of root hub code.
113 /*-------------------------------------------------------------------------*/
114 #define KERNEL_REL bin2bcd(LINUX_VERSION_MAJOR)
115 #define KERNEL_VER bin2bcd(LINUX_VERSION_PATCHLEVEL)
117 /* usb 3.1 root hub device descriptor */
118 static const u8 usb31_rh_dev_descriptor[18] = {
119 0x12, /* __u8 bLength; */
120 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
121 0x10, 0x03, /* __le16 bcdUSB; v3.1 */
123 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
124 0x00, /* __u8 bDeviceSubClass; */
125 0x03, /* __u8 bDeviceProtocol; USB 3 hub */
126 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
128 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
129 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
130 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
132 0x03, /* __u8 iManufacturer; */
133 0x02, /* __u8 iProduct; */
134 0x01, /* __u8 iSerialNumber; */
135 0x01 /* __u8 bNumConfigurations; */
138 /* usb 3.0 root hub device descriptor */
139 static const u8 usb3_rh_dev_descriptor[18] = {
140 0x12, /* __u8 bLength; */
141 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
142 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
144 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
145 0x00, /* __u8 bDeviceSubClass; */
146 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
147 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
149 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
150 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
151 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
153 0x03, /* __u8 iManufacturer; */
154 0x02, /* __u8 iProduct; */
155 0x01, /* __u8 iSerialNumber; */
156 0x01 /* __u8 bNumConfigurations; */
159 /* usb 2.5 (wireless USB 1.0) root hub device descriptor */
160 static const u8 usb25_rh_dev_descriptor[18] = {
161 0x12, /* __u8 bLength; */
162 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
163 0x50, 0x02, /* __le16 bcdUSB; v2.5 */
165 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
166 0x00, /* __u8 bDeviceSubClass; */
167 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
168 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
170 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
171 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
172 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
174 0x03, /* __u8 iManufacturer; */
175 0x02, /* __u8 iProduct; */
176 0x01, /* __u8 iSerialNumber; */
177 0x01 /* __u8 bNumConfigurations; */
180 /* usb 2.0 root hub device descriptor */
181 static const u8 usb2_rh_dev_descriptor[18] = {
182 0x12, /* __u8 bLength; */
183 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
184 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
186 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
187 0x00, /* __u8 bDeviceSubClass; */
188 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
189 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
191 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
192 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
193 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
195 0x03, /* __u8 iManufacturer; */
196 0x02, /* __u8 iProduct; */
197 0x01, /* __u8 iSerialNumber; */
198 0x01 /* __u8 bNumConfigurations; */
201 /* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
203 /* usb 1.1 root hub device descriptor */
204 static const u8 usb11_rh_dev_descriptor[18] = {
205 0x12, /* __u8 bLength; */
206 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
207 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
209 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
210 0x00, /* __u8 bDeviceSubClass; */
211 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
212 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
214 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
215 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
216 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
218 0x03, /* __u8 iManufacturer; */
219 0x02, /* __u8 iProduct; */
220 0x01, /* __u8 iSerialNumber; */
221 0x01 /* __u8 bNumConfigurations; */
225 /*-------------------------------------------------------------------------*/
227 /* Configuration descriptors for our root hubs */
229 static const u8 fs_rh_config_descriptor[] = {
231 /* one configuration */
232 0x09, /* __u8 bLength; */
233 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
234 0x19, 0x00, /* __le16 wTotalLength; */
235 0x01, /* __u8 bNumInterfaces; (1) */
236 0x01, /* __u8 bConfigurationValue; */
237 0x00, /* __u8 iConfiguration; */
238 0xc0, /* __u8 bmAttributes;
243 0x00, /* __u8 MaxPower; */
246 * USB 2.0, single TT organization (mandatory):
247 * one interface, protocol 0
249 * USB 2.0, multiple TT organization (optional):
250 * two interfaces, protocols 1 (like single TT)
251 * and 2 (multiple TT mode) ... config is
257 0x09, /* __u8 if_bLength; */
258 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
259 0x00, /* __u8 if_bInterfaceNumber; */
260 0x00, /* __u8 if_bAlternateSetting; */
261 0x01, /* __u8 if_bNumEndpoints; */
262 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
263 0x00, /* __u8 if_bInterfaceSubClass; */
264 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
265 0x00, /* __u8 if_iInterface; */
267 /* one endpoint (status change endpoint) */
268 0x07, /* __u8 ep_bLength; */
269 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
270 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
271 0x03, /* __u8 ep_bmAttributes; Interrupt */
272 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
273 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
276 static const u8 hs_rh_config_descriptor[] = {
278 /* one configuration */
279 0x09, /* __u8 bLength; */
280 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
281 0x19, 0x00, /* __le16 wTotalLength; */
282 0x01, /* __u8 bNumInterfaces; (1) */
283 0x01, /* __u8 bConfigurationValue; */
284 0x00, /* __u8 iConfiguration; */
285 0xc0, /* __u8 bmAttributes;
290 0x00, /* __u8 MaxPower; */
293 * USB 2.0, single TT organization (mandatory):
294 * one interface, protocol 0
296 * USB 2.0, multiple TT organization (optional):
297 * two interfaces, protocols 1 (like single TT)
298 * and 2 (multiple TT mode) ... config is
304 0x09, /* __u8 if_bLength; */
305 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
306 0x00, /* __u8 if_bInterfaceNumber; */
307 0x00, /* __u8 if_bAlternateSetting; */
308 0x01, /* __u8 if_bNumEndpoints; */
309 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
310 0x00, /* __u8 if_bInterfaceSubClass; */
311 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
312 0x00, /* __u8 if_iInterface; */
314 /* one endpoint (status change endpoint) */
315 0x07, /* __u8 ep_bLength; */
316 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
317 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
318 0x03, /* __u8 ep_bmAttributes; Interrupt */
319 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
320 * see hub.c:hub_configure() for details. */
321 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
322 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
325 static const u8 ss_rh_config_descriptor[] = {
326 /* one configuration */
327 0x09, /* __u8 bLength; */
328 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
329 0x1f, 0x00, /* __le16 wTotalLength; */
330 0x01, /* __u8 bNumInterfaces; (1) */
331 0x01, /* __u8 bConfigurationValue; */
332 0x00, /* __u8 iConfiguration; */
333 0xc0, /* __u8 bmAttributes;
338 0x00, /* __u8 MaxPower; */
341 0x09, /* __u8 if_bLength; */
342 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
343 0x00, /* __u8 if_bInterfaceNumber; */
344 0x00, /* __u8 if_bAlternateSetting; */
345 0x01, /* __u8 if_bNumEndpoints; */
346 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
347 0x00, /* __u8 if_bInterfaceSubClass; */
348 0x00, /* __u8 if_bInterfaceProtocol; */
349 0x00, /* __u8 if_iInterface; */
351 /* one endpoint (status change endpoint) */
352 0x07, /* __u8 ep_bLength; */
353 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
354 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
355 0x03, /* __u8 ep_bmAttributes; Interrupt */
356 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
357 * see hub.c:hub_configure() for details. */
358 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
359 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
361 /* one SuperSpeed endpoint companion descriptor */
362 0x06, /* __u8 ss_bLength */
363 USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
365 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
366 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
367 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
370 /* authorized_default behaviour:
371 * -1 is authorized for all devices except wireless (old behaviour)
372 * 0 is unauthorized for all devices
373 * 1 is authorized for all devices
374 * 2 is authorized for internal devices
376 #define USB_AUTHORIZE_WIRED -1
377 #define USB_AUTHORIZE_NONE 0
378 #define USB_AUTHORIZE_ALL 1
379 #define USB_AUTHORIZE_INTERNAL 2
381 static int authorized_default = USB_AUTHORIZE_WIRED;
382 module_param(authorized_default, int, S_IRUGO|S_IWUSR);
383 MODULE_PARM_DESC(authorized_default,
384 "Default USB device authorization: 0 is not authorized, 1 is "
385 "authorized, 2 is authorized for internal devices, -1 is "
386 "authorized except for wireless USB (default, old behaviour)");
387 /*-------------------------------------------------------------------------*/
390 * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
391 * @s: Null-terminated ASCII (actually ISO-8859-1) string
392 * @buf: Buffer for USB string descriptor (header + UTF-16LE)
393 * @len: Length (in bytes; may be odd) of descriptor buffer.
395 * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
399 * USB String descriptors can contain at most 126 characters; input
400 * strings longer than that are truncated.
403 ascii2desc(char const *s, u8 *buf, unsigned len)
405 unsigned n, t = 2 + 2*strlen(s);
408 t = 254; /* Longest possible UTF string descriptor */
412 t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
420 t = (unsigned char)*s++;
426 * rh_string() - provides string descriptors for root hub
427 * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
428 * @hcd: the host controller for this root hub
429 * @data: buffer for output packet
430 * @len: length of the provided buffer
432 * Produces either a manufacturer, product or serial number string for the
433 * virtual root hub device.
435 * Return: The number of bytes filled in: the length of the descriptor or
436 * of the provided buffer, whichever is less.
439 rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
443 static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
448 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
449 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
452 memcpy(data, langids, len);
456 s = hcd->self.bus_name;
460 s = hcd->product_desc;
464 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
465 init_utsname()->release, hcd->driver->description);
469 /* Can't happen; caller guarantees it */
473 return ascii2desc(s, data, len);
477 /* Root hub control transfers execute synchronously */
478 static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
480 struct usb_ctrlrequest *cmd;
481 u16 typeReq, wValue, wIndex, wLength;
482 u8 *ubuf = urb->transfer_buffer;
486 u8 patch_protocol = 0;
493 spin_lock_irq(&hcd_root_hub_lock);
494 status = usb_hcd_link_urb_to_ep(hcd, urb);
495 spin_unlock_irq(&hcd_root_hub_lock);
498 urb->hcpriv = hcd; /* Indicate it's queued */
500 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
501 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
502 wValue = le16_to_cpu (cmd->wValue);
503 wIndex = le16_to_cpu (cmd->wIndex);
504 wLength = le16_to_cpu (cmd->wLength);
506 if (wLength > urb->transfer_buffer_length)
510 * tbuf should be at least as big as the
511 * USB hub descriptor.
513 tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
514 tbuf = kzalloc(tbuf_size, GFP_KERNEL);
523 urb->actual_length = 0;
526 /* DEVICE REQUESTS */
528 /* The root hub's remote wakeup enable bit is implemented using
529 * driver model wakeup flags. If this system supports wakeup
530 * through USB, userspace may change the default "allow wakeup"
531 * policy through sysfs or these calls.
533 * Most root hubs support wakeup from downstream devices, for
534 * runtime power management (disabling USB clocks and reducing
535 * VBUS power usage). However, not all of them do so; silicon,
536 * board, and BIOS bugs here are not uncommon, so these can't
537 * be treated quite like external hubs.
539 * Likewise, not all root hubs will pass wakeup events upstream,
540 * to wake up the whole system. So don't assume root hub and
541 * controller capabilities are identical.
544 case DeviceRequest | USB_REQ_GET_STATUS:
545 tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
546 << USB_DEVICE_REMOTE_WAKEUP)
547 | (1 << USB_DEVICE_SELF_POWERED);
551 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
552 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
553 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
557 case DeviceOutRequest | USB_REQ_SET_FEATURE:
558 if (device_can_wakeup(&hcd->self.root_hub->dev)
559 && wValue == USB_DEVICE_REMOTE_WAKEUP)
560 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
564 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
568 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
570 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
571 switch (wValue & 0xff00) {
572 case USB_DT_DEVICE << 8:
573 switch (hcd->speed) {
576 bufp = usb31_rh_dev_descriptor;
579 bufp = usb3_rh_dev_descriptor;
582 bufp = usb25_rh_dev_descriptor;
585 bufp = usb2_rh_dev_descriptor;
588 bufp = usb11_rh_dev_descriptor;
597 case USB_DT_CONFIG << 8:
598 switch (hcd->speed) {
602 bufp = ss_rh_config_descriptor;
603 len = sizeof ss_rh_config_descriptor;
607 bufp = hs_rh_config_descriptor;
608 len = sizeof hs_rh_config_descriptor;
611 bufp = fs_rh_config_descriptor;
612 len = sizeof fs_rh_config_descriptor;
617 if (device_can_wakeup(&hcd->self.root_hub->dev))
620 case USB_DT_STRING << 8:
621 if ((wValue & 0xff) < 4)
622 urb->actual_length = rh_string(wValue & 0xff,
624 else /* unsupported IDs --> "protocol stall" */
627 case USB_DT_BOS << 8:
633 case DeviceRequest | USB_REQ_GET_INTERFACE:
637 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
639 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
640 /* wValue == urb->dev->devaddr */
641 dev_dbg (hcd->self.controller, "root hub device address %d\n",
645 /* INTERFACE REQUESTS (no defined feature/status flags) */
647 /* ENDPOINT REQUESTS */
649 case EndpointRequest | USB_REQ_GET_STATUS:
650 /* ENDPOINT_HALT flag */
655 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
656 case EndpointOutRequest | USB_REQ_SET_FEATURE:
657 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
660 /* CLASS REQUESTS (and errors) */
664 /* non-generic request */
670 if (wValue == HUB_PORT_STATUS)
673 /* other port status types return 8 bytes */
676 case GetHubDescriptor:
677 len = sizeof (struct usb_hub_descriptor);
679 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
680 /* len is returned by hub_control */
683 status = hcd->driver->hub_control (hcd,
684 typeReq, wValue, wIndex,
687 if (typeReq == GetHubDescriptor)
688 usb_hub_adjust_deviceremovable(hcd->self.root_hub,
689 (struct usb_hub_descriptor *)tbuf);
692 /* "protocol stall" on error */
698 if (status != -EPIPE) {
699 dev_dbg (hcd->self.controller,
700 "CTRL: TypeReq=0x%x val=0x%x "
701 "idx=0x%x len=%d ==> %d\n",
702 typeReq, wValue, wIndex,
705 } else if (status > 0) {
706 /* hub_control may return the length of data copied. */
711 if (urb->transfer_buffer_length < len)
712 len = urb->transfer_buffer_length;
713 urb->actual_length = len;
714 /* always USB_DIR_IN, toward host */
715 memcpy (ubuf, bufp, len);
717 /* report whether RH hardware supports remote wakeup */
719 len > offsetof (struct usb_config_descriptor,
721 ((struct usb_config_descriptor *)ubuf)->bmAttributes
722 |= USB_CONFIG_ATT_WAKEUP;
724 /* report whether RH hardware has an integrated TT */
725 if (patch_protocol &&
726 len > offsetof(struct usb_device_descriptor,
728 ((struct usb_device_descriptor *) ubuf)->
729 bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
735 /* any errors get returned through the urb completion */
736 spin_lock_irq(&hcd_root_hub_lock);
737 usb_hcd_unlink_urb_from_ep(hcd, urb);
738 usb_hcd_giveback_urb(hcd, urb, status);
739 spin_unlock_irq(&hcd_root_hub_lock);
743 /*-------------------------------------------------------------------------*/
746 * Root Hub interrupt transfers are polled using a timer if the
747 * driver requests it; otherwise the driver is responsible for
748 * calling usb_hcd_poll_rh_status() when an event occurs.
750 * Completion handler may not sleep. See usb_hcd_giveback_urb() for details.
752 void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
758 char buffer[6]; /* Any root hubs with > 31 ports? */
760 if (unlikely(!hcd->rh_pollable))
762 if (!hcd->uses_new_polling && !hcd->status_urb)
765 length = hcd->driver->hub_status_data(hcd, buffer);
768 /* try to complete the status urb */
769 spin_lock_irqsave(&hcd_root_hub_lock, flags);
770 urb = hcd->status_urb;
772 clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
773 hcd->status_urb = NULL;
774 if (urb->transfer_buffer_length >= length) {
778 length = urb->transfer_buffer_length;
780 urb->actual_length = length;
781 memcpy(urb->transfer_buffer, buffer, length);
783 usb_hcd_unlink_urb_from_ep(hcd, urb);
784 usb_hcd_giveback_urb(hcd, urb, status);
787 set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
789 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
792 /* The USB 2.0 spec says 256 ms. This is close enough and won't
793 * exceed that limit if HZ is 100. The math is more clunky than
794 * maybe expected, this is to make sure that all timers for USB devices
795 * fire at the same time to give the CPU a break in between */
796 if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
797 (length == 0 && hcd->status_urb != NULL))
798 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
800 EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
803 static void rh_timer_func (struct timer_list *t)
805 struct usb_hcd *_hcd = from_timer(_hcd, t, rh_timer);
807 usb_hcd_poll_rh_status(_hcd);
810 /*-------------------------------------------------------------------------*/
812 static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
816 unsigned len = 1 + (urb->dev->maxchild / 8);
818 spin_lock_irqsave (&hcd_root_hub_lock, flags);
819 if (hcd->status_urb || urb->transfer_buffer_length < len) {
820 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
825 retval = usb_hcd_link_urb_to_ep(hcd, urb);
829 hcd->status_urb = urb;
830 urb->hcpriv = hcd; /* indicate it's queued */
831 if (!hcd->uses_new_polling)
832 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
834 /* If a status change has already occurred, report it ASAP */
835 else if (HCD_POLL_PENDING(hcd))
836 mod_timer(&hcd->rh_timer, jiffies);
839 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
843 static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
845 if (usb_endpoint_xfer_int(&urb->ep->desc))
846 return rh_queue_status (hcd, urb);
847 if (usb_endpoint_xfer_control(&urb->ep->desc))
848 return rh_call_control (hcd, urb);
852 /*-------------------------------------------------------------------------*/
854 /* Unlinks of root-hub control URBs are legal, but they don't do anything
855 * since these URBs always execute synchronously.
857 static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
862 spin_lock_irqsave(&hcd_root_hub_lock, flags);
863 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
867 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
870 } else { /* Status URB */
871 if (!hcd->uses_new_polling)
872 del_timer (&hcd->rh_timer);
873 if (urb == hcd->status_urb) {
874 hcd->status_urb = NULL;
875 usb_hcd_unlink_urb_from_ep(hcd, urb);
876 usb_hcd_giveback_urb(hcd, urb, status);
880 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
885 /*-------------------------------------------------------------------------*/
888 * usb_bus_init - shared initialization code
889 * @bus: the bus structure being initialized
891 * This code is used to initialize a usb_bus structure, memory for which is
892 * separately managed.
894 static void usb_bus_init (struct usb_bus *bus)
896 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
898 bus->devnum_next = 1;
900 bus->root_hub = NULL;
902 bus->bandwidth_allocated = 0;
903 bus->bandwidth_int_reqs = 0;
904 bus->bandwidth_isoc_reqs = 0;
905 mutex_init(&bus->devnum_next_mutex);
908 /*-------------------------------------------------------------------------*/
911 * usb_register_bus - registers the USB host controller with the usb core
912 * @bus: pointer to the bus to register
914 * Context: task context, might sleep.
916 * Assigns a bus number, and links the controller into usbcore data
917 * structures so that it can be seen by scanning the bus list.
919 * Return: 0 if successful. A negative error code otherwise.
921 static int usb_register_bus(struct usb_bus *bus)
926 mutex_lock(&usb_bus_idr_lock);
927 busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL);
929 pr_err("%s: failed to get bus number\n", usbcore_name);
930 goto error_find_busnum;
932 bus->busnum = busnum;
933 mutex_unlock(&usb_bus_idr_lock);
935 usb_notify_add_bus(bus);
937 dev_info (bus->controller, "new USB bus registered, assigned bus "
938 "number %d\n", bus->busnum);
942 mutex_unlock(&usb_bus_idr_lock);
947 * usb_deregister_bus - deregisters the USB host controller
948 * @bus: pointer to the bus to deregister
950 * Context: task context, might sleep.
952 * Recycles the bus number, and unlinks the controller from usbcore data
953 * structures so that it won't be seen by scanning the bus list.
955 static void usb_deregister_bus (struct usb_bus *bus)
957 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
960 * NOTE: make sure that all the devices are removed by the
961 * controller code, as well as having it call this when cleaning
964 mutex_lock(&usb_bus_idr_lock);
965 idr_remove(&usb_bus_idr, bus->busnum);
966 mutex_unlock(&usb_bus_idr_lock);
968 usb_notify_remove_bus(bus);
972 * register_root_hub - called by usb_add_hcd() to register a root hub
973 * @hcd: host controller for this root hub
975 * This function registers the root hub with the USB subsystem. It sets up
976 * the device properly in the device tree and then calls usb_new_device()
977 * to register the usb device. It also assigns the root hub's USB address
980 * Return: 0 if successful. A negative error code otherwise.
982 static int register_root_hub(struct usb_hcd *hcd)
984 struct device *parent_dev = hcd->self.controller;
985 struct usb_device *usb_dev = hcd->self.root_hub;
986 const int devnum = 1;
989 usb_dev->devnum = devnum;
990 usb_dev->bus->devnum_next = devnum + 1;
991 set_bit (devnum, usb_dev->bus->devmap.devicemap);
992 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
994 mutex_lock(&usb_bus_idr_lock);
996 usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
997 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
998 if (retval != sizeof usb_dev->descriptor) {
999 mutex_unlock(&usb_bus_idr_lock);
1000 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
1001 dev_name(&usb_dev->dev), retval);
1002 return (retval < 0) ? retval : -EMSGSIZE;
1005 if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
1006 retval = usb_get_bos_descriptor(usb_dev);
1008 usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
1009 } else if (usb_dev->speed >= USB_SPEED_SUPER) {
1010 mutex_unlock(&usb_bus_idr_lock);
1011 dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
1012 dev_name(&usb_dev->dev), retval);
1017 retval = usb_new_device (usb_dev);
1019 dev_err (parent_dev, "can't register root hub for %s, %d\n",
1020 dev_name(&usb_dev->dev), retval);
1022 spin_lock_irq (&hcd_root_hub_lock);
1023 hcd->rh_registered = 1;
1024 spin_unlock_irq (&hcd_root_hub_lock);
1026 /* Did the HC die before the root hub was registered? */
1028 usb_hc_died (hcd); /* This time clean up */
1030 mutex_unlock(&usb_bus_idr_lock);
1036 * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
1037 * @bus: the bus which the root hub belongs to
1038 * @portnum: the port which is being resumed
1040 * HCDs should call this function when they know that a resume signal is
1041 * being sent to a root-hub port. The root hub will be prevented from
1042 * going into autosuspend until usb_hcd_end_port_resume() is called.
1044 * The bus's private lock must be held by the caller.
1046 void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
1048 unsigned bit = 1 << portnum;
1050 if (!(bus->resuming_ports & bit)) {
1051 bus->resuming_ports |= bit;
1052 pm_runtime_get_noresume(&bus->root_hub->dev);
1055 EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
1058 * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
1059 * @bus: the bus which the root hub belongs to
1060 * @portnum: the port which is being resumed
1062 * HCDs should call this function when they know that a resume signal has
1063 * stopped being sent to a root-hub port. The root hub will be allowed to
1064 * autosuspend again.
1066 * The bus's private lock must be held by the caller.
1068 void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
1070 unsigned bit = 1 << portnum;
1072 if (bus->resuming_ports & bit) {
1073 bus->resuming_ports &= ~bit;
1074 pm_runtime_put_noidle(&bus->root_hub->dev);
1077 EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
1079 /*-------------------------------------------------------------------------*/
1082 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1083 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1084 * @is_input: true iff the transaction sends data to the host
1085 * @isoc: true for isochronous transactions, false for interrupt ones
1086 * @bytecount: how many bytes in the transaction.
1088 * Return: Approximate bus time in nanoseconds for a periodic transaction.
1091 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1092 * scheduled in software, this function is only used for such scheduling.
1094 long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1099 case USB_SPEED_LOW: /* INTR only */
1101 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1102 return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1104 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1105 return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1107 case USB_SPEED_FULL: /* ISOC or INTR */
1109 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1110 return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
1112 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1113 return 9107L + BW_HOST_DELAY + tmp;
1115 case USB_SPEED_HIGH: /* ISOC or INTR */
1116 /* FIXME adjust for input vs output */
1118 tmp = HS_NSECS_ISO (bytecount);
1120 tmp = HS_NSECS (bytecount);
1123 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1127 EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1130 /*-------------------------------------------------------------------------*/
1133 * Generic HC operations.
1136 /*-------------------------------------------------------------------------*/
1139 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1140 * @hcd: host controller to which @urb was submitted
1141 * @urb: URB being submitted
1143 * Host controller drivers should call this routine in their enqueue()
1144 * method. The HCD's private spinlock must be held and interrupts must
1145 * be disabled. The actions carried out here are required for URB
1146 * submission, as well as for endpoint shutdown and for usb_kill_urb.
1148 * Return: 0 for no error, otherwise a negative error code (in which case
1149 * the enqueue() method must fail). If no error occurs but enqueue() fails
1150 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1151 * the private spinlock and returning.
1153 int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1157 spin_lock(&hcd_urb_list_lock);
1159 /* Check that the URB isn't being killed */
1160 if (unlikely(atomic_read(&urb->reject))) {
1165 if (unlikely(!urb->ep->enabled)) {
1170 if (unlikely(!urb->dev->can_submit)) {
1176 * Check the host controller's state and add the URB to the
1179 if (HCD_RH_RUNNING(hcd)) {
1181 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1187 spin_unlock(&hcd_urb_list_lock);
1190 EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1193 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1194 * @hcd: host controller to which @urb was submitted
1195 * @urb: URB being checked for unlinkability
1196 * @status: error code to store in @urb if the unlink succeeds
1198 * Host controller drivers should call this routine in their dequeue()
1199 * method. The HCD's private spinlock must be held and interrupts must
1200 * be disabled. The actions carried out here are required for making
1201 * sure than an unlink is valid.
1203 * Return: 0 for no error, otherwise a negative error code (in which case
1204 * the dequeue() method must fail). The possible error codes are:
1206 * -EIDRM: @urb was not submitted or has already completed.
1207 * The completion function may not have been called yet.
1209 * -EBUSY: @urb has already been unlinked.
1211 int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1214 struct list_head *tmp;
1216 /* insist the urb is still queued */
1217 list_for_each(tmp, &urb->ep->urb_list) {
1218 if (tmp == &urb->urb_list)
1221 if (tmp != &urb->urb_list)
1224 /* Any status except -EINPROGRESS means something already started to
1225 * unlink this URB from the hardware. So there's no more work to do.
1229 urb->unlinked = status;
1232 EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1235 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1236 * @hcd: host controller to which @urb was submitted
1237 * @urb: URB being unlinked
1239 * Host controller drivers should call this routine before calling
1240 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1241 * interrupts must be disabled. The actions carried out here are required
1242 * for URB completion.
1244 void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1246 /* clear all state linking urb to this dev (and hcd) */
1247 spin_lock(&hcd_urb_list_lock);
1248 list_del_init(&urb->urb_list);
1249 spin_unlock(&hcd_urb_list_lock);
1251 EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1254 * Some usb host controllers can only perform dma using a small SRAM area.
1255 * The usb core itself is however optimized for host controllers that can dma
1256 * using regular system memory - like pci devices doing bus mastering.
1258 * To support host controllers with limited dma capabilities we provide dma
1259 * bounce buffers. This feature can be enabled by initializing
1260 * hcd->localmem_pool using usb_hcd_setup_local_mem().
1262 * The initialized hcd->localmem_pool then tells the usb code to allocate all
1263 * data for dma using the genalloc API.
1265 * So, to summarize...
1267 * - We need "local" memory, canonical example being
1268 * a small SRAM on a discrete controller being the
1269 * only memory that the controller can read ...
1270 * (a) "normal" kernel memory is no good, and
1271 * (b) there's not enough to share
1273 * - So we use that, even though the primary requirement
1274 * is that the memory be "local" (hence addressable
1275 * by that device), not "coherent".
1279 static int hcd_alloc_coherent(struct usb_bus *bus,
1280 gfp_t mem_flags, dma_addr_t *dma_handle,
1281 void **vaddr_handle, size_t size,
1282 enum dma_data_direction dir)
1284 unsigned char *vaddr;
1286 if (*vaddr_handle == NULL) {
1291 vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
1292 mem_flags, dma_handle);
1297 * Store the virtual address of the buffer at the end
1298 * of the allocated dma buffer. The size of the buffer
1299 * may be uneven so use unaligned functions instead
1300 * of just rounding up. It makes sense to optimize for
1301 * memory footprint over access speed since the amount
1302 * of memory available for dma may be limited.
1304 put_unaligned((unsigned long)*vaddr_handle,
1305 (unsigned long *)(vaddr + size));
1307 if (dir == DMA_TO_DEVICE)
1308 memcpy(vaddr, *vaddr_handle, size);
1310 *vaddr_handle = vaddr;
1314 static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1315 void **vaddr_handle, size_t size,
1316 enum dma_data_direction dir)
1318 unsigned char *vaddr = *vaddr_handle;
1320 vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1322 if (dir == DMA_FROM_DEVICE)
1323 memcpy(vaddr, *vaddr_handle, size);
1325 hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1327 *vaddr_handle = vaddr;
1331 void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1333 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1334 (urb->transfer_flags & URB_SETUP_MAP_SINGLE))
1335 dma_unmap_single(hcd->self.sysdev,
1337 sizeof(struct usb_ctrlrequest),
1339 else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1340 hcd_free_coherent(urb->dev->bus,
1342 (void **) &urb->setup_packet,
1343 sizeof(struct usb_ctrlrequest),
1346 /* Make it safe to call this routine more than once */
1347 urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1349 EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1351 static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1353 if (hcd->driver->unmap_urb_for_dma)
1354 hcd->driver->unmap_urb_for_dma(hcd, urb);
1356 usb_hcd_unmap_urb_for_dma(hcd, urb);
1359 void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1361 enum dma_data_direction dir;
1363 usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1365 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1366 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1367 (urb->transfer_flags & URB_DMA_MAP_SG))
1368 dma_unmap_sg(hcd->self.sysdev,
1372 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1373 (urb->transfer_flags & URB_DMA_MAP_PAGE))
1374 dma_unmap_page(hcd->self.sysdev,
1376 urb->transfer_buffer_length,
1378 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1379 (urb->transfer_flags & URB_DMA_MAP_SINGLE))
1380 dma_unmap_single(hcd->self.sysdev,
1382 urb->transfer_buffer_length,
1384 else if (urb->transfer_flags & URB_MAP_LOCAL)
1385 hcd_free_coherent(urb->dev->bus,
1387 &urb->transfer_buffer,
1388 urb->transfer_buffer_length,
1391 /* Make it safe to call this routine more than once */
1392 urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1393 URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1395 EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1397 static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1400 if (hcd->driver->map_urb_for_dma)
1401 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1403 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1406 int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1409 enum dma_data_direction dir;
1412 /* Map the URB's buffers for DMA access.
1413 * Lower level HCD code should use *_dma exclusively,
1414 * unless it uses pio or talks to another transport,
1415 * or uses the provided scatter gather list for bulk.
1418 if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1419 if (hcd->self.uses_pio_for_control)
1421 if (hcd->localmem_pool) {
1422 ret = hcd_alloc_coherent(
1423 urb->dev->bus, mem_flags,
1425 (void **)&urb->setup_packet,
1426 sizeof(struct usb_ctrlrequest),
1430 urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1431 } else if (hcd_uses_dma(hcd)) {
1432 if (object_is_on_stack(urb->setup_packet)) {
1433 WARN_ONCE(1, "setup packet is on stack\n");
1437 urb->setup_dma = dma_map_single(
1440 sizeof(struct usb_ctrlrequest),
1442 if (dma_mapping_error(hcd->self.sysdev,
1445 urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1449 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1450 if (urb->transfer_buffer_length != 0
1451 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1452 if (hcd->localmem_pool) {
1453 ret = hcd_alloc_coherent(
1454 urb->dev->bus, mem_flags,
1456 &urb->transfer_buffer,
1457 urb->transfer_buffer_length,
1460 urb->transfer_flags |= URB_MAP_LOCAL;
1461 } else if (hcd_uses_dma(hcd)) {
1465 /* We don't support sg for isoc transfers ! */
1466 if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
1479 urb->transfer_flags |= URB_DMA_MAP_SG;
1480 urb->num_mapped_sgs = n;
1481 if (n != urb->num_sgs)
1482 urb->transfer_flags |=
1483 URB_DMA_SG_COMBINED;
1484 } else if (urb->sg) {
1485 struct scatterlist *sg = urb->sg;
1486 urb->transfer_dma = dma_map_page(
1490 urb->transfer_buffer_length,
1492 if (dma_mapping_error(hcd->self.sysdev,
1496 urb->transfer_flags |= URB_DMA_MAP_PAGE;
1497 } else if (object_is_on_stack(urb->transfer_buffer)) {
1498 WARN_ONCE(1, "transfer buffer is on stack\n");
1501 urb->transfer_dma = dma_map_single(
1503 urb->transfer_buffer,
1504 urb->transfer_buffer_length,
1506 if (dma_mapping_error(hcd->self.sysdev,
1510 urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1513 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1514 URB_SETUP_MAP_LOCAL)))
1515 usb_hcd_unmap_urb_for_dma(hcd, urb);
1519 EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1521 /*-------------------------------------------------------------------------*/
1523 /* may be called in any context with a valid urb->dev usecount
1524 * caller surrenders "ownership" of urb
1525 * expects usb_submit_urb() to have sanity checked and conditioned all
1528 int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1531 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1533 /* increment urb's reference count as part of giving it to the HCD
1534 * (which will control it). HCD guarantees that it either returns
1535 * an error or calls giveback(), but not both.
1538 atomic_inc(&urb->use_count);
1539 atomic_inc(&urb->dev->urbnum);
1540 usbmon_urb_submit(&hcd->self, urb);
1542 /* NOTE requirements on root-hub callers (usbfs and the hub
1543 * driver, for now): URBs' urb->transfer_buffer must be
1544 * valid and usb_buffer_{sync,unmap}() not be needed, since
1545 * they could clobber root hub response data. Also, control
1546 * URBs must be submitted in process context with interrupts
1550 if (is_root_hub(urb->dev)) {
1551 status = rh_urb_enqueue(hcd, urb);
1553 status = map_urb_for_dma(hcd, urb, mem_flags);
1554 if (likely(status == 0)) {
1555 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1556 if (unlikely(status))
1557 unmap_urb_for_dma(hcd, urb);
1561 if (unlikely(status)) {
1562 usbmon_urb_submit_error(&hcd->self, urb, status);
1564 INIT_LIST_HEAD(&urb->urb_list);
1565 atomic_dec(&urb->use_count);
1567 * Order the write of urb->use_count above before the read
1568 * of urb->reject below. Pairs with the memory barriers in
1569 * usb_kill_urb() and usb_poison_urb().
1571 smp_mb__after_atomic();
1573 atomic_dec(&urb->dev->urbnum);
1574 if (atomic_read(&urb->reject))
1575 wake_up(&usb_kill_urb_queue);
1581 /*-------------------------------------------------------------------------*/
1583 /* this makes the hcd giveback() the urb more quickly, by kicking it
1584 * off hardware queues (which may take a while) and returning it as
1585 * soon as practical. we've already set up the urb's return status,
1586 * but we can't know if the callback completed already.
1588 static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1592 if (is_root_hub(urb->dev))
1593 value = usb_rh_urb_dequeue(hcd, urb, status);
1596 /* The only reason an HCD might fail this call is if
1597 * it has not yet fully queued the urb to begin with.
1598 * Such failures should be harmless. */
1599 value = hcd->driver->urb_dequeue(hcd, urb, status);
1605 * called in any context
1607 * caller guarantees urb won't be recycled till both unlink()
1608 * and the urb's completion function return
1610 int usb_hcd_unlink_urb (struct urb *urb, int status)
1612 struct usb_hcd *hcd;
1613 struct usb_device *udev = urb->dev;
1614 int retval = -EIDRM;
1615 unsigned long flags;
1617 /* Prevent the device and bus from going away while
1618 * the unlink is carried out. If they are already gone
1619 * then urb->use_count must be 0, since disconnected
1620 * devices can't have any active URBs.
1622 spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1623 if (atomic_read(&urb->use_count) > 0) {
1627 spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1629 hcd = bus_to_hcd(urb->dev->bus);
1630 retval = unlink1(hcd, urb, status);
1632 retval = -EINPROGRESS;
1633 else if (retval != -EIDRM && retval != -EBUSY)
1634 dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
1641 /*-------------------------------------------------------------------------*/
1643 static void __usb_hcd_giveback_urb(struct urb *urb)
1645 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1646 struct usb_anchor *anchor = urb->anchor;
1647 int status = urb->unlinked;
1650 if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1651 urb->actual_length < urb->transfer_buffer_length &&
1653 status = -EREMOTEIO;
1655 unmap_urb_for_dma(hcd, urb);
1656 usbmon_urb_complete(&hcd->self, urb, status);
1657 usb_anchor_suspend_wakeups(anchor);
1658 usb_unanchor_urb(urb);
1659 if (likely(status == 0))
1660 usb_led_activity(USB_LED_EVENT_HOST);
1662 /* pass ownership to the completion handler */
1663 urb->status = status;
1665 * This function can be called in task context inside another remote
1666 * coverage collection section, but kcov doesn't support that kind of
1667 * recursion yet. Only collect coverage in softirq context for now.
1669 kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum);
1671 kcov_remote_stop_softirq();
1673 usb_anchor_resume_wakeups(anchor);
1674 atomic_dec(&urb->use_count);
1676 * Order the write of urb->use_count above before the read
1677 * of urb->reject below. Pairs with the memory barriers in
1678 * usb_kill_urb() and usb_poison_urb().
1680 smp_mb__after_atomic();
1682 if (unlikely(atomic_read(&urb->reject)))
1683 wake_up(&usb_kill_urb_queue);
1687 static void usb_giveback_urb_bh(struct tasklet_struct *t)
1689 struct giveback_urb_bh *bh = from_tasklet(bh, t, bh);
1690 struct list_head local_list;
1692 spin_lock_irq(&bh->lock);
1695 list_replace_init(&bh->head, &local_list);
1696 spin_unlock_irq(&bh->lock);
1698 while (!list_empty(&local_list)) {
1701 urb = list_entry(local_list.next, struct urb, urb_list);
1702 list_del_init(&urb->urb_list);
1703 bh->completing_ep = urb->ep;
1704 __usb_hcd_giveback_urb(urb);
1705 bh->completing_ep = NULL;
1708 /* check if there are new URBs to giveback */
1709 spin_lock_irq(&bh->lock);
1710 if (!list_empty(&bh->head))
1712 bh->running = false;
1713 spin_unlock_irq(&bh->lock);
1717 * usb_hcd_giveback_urb - return URB from HCD to device driver
1718 * @hcd: host controller returning the URB
1719 * @urb: urb being returned to the USB device driver.
1720 * @status: completion status code for the URB.
1722 * Context: atomic. The completion callback is invoked in caller's context.
1723 * For HCDs with HCD_BH flag set, the completion callback is invoked in tasklet
1724 * context (except for URBs submitted to the root hub which always complete in
1725 * caller's context).
1727 * This hands the URB from HCD to its USB device driver, using its
1728 * completion function. The HCD has freed all per-urb resources
1729 * (and is done using urb->hcpriv). It also released all HCD locks;
1730 * the device driver won't cause problems if it frees, modifies,
1731 * or resubmits this URB.
1733 * If @urb was unlinked, the value of @status will be overridden by
1734 * @urb->unlinked. Erroneous short transfers are detected in case
1735 * the HCD hasn't checked for them.
1737 void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1739 struct giveback_urb_bh *bh;
1740 bool running, high_prio_bh;
1742 /* pass status to tasklet via unlinked */
1743 if (likely(!urb->unlinked))
1744 urb->unlinked = status;
1746 if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
1747 __usb_hcd_giveback_urb(urb);
1751 if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) {
1752 bh = &hcd->high_prio_bh;
1753 high_prio_bh = true;
1755 bh = &hcd->low_prio_bh;
1756 high_prio_bh = false;
1759 spin_lock(&bh->lock);
1760 list_add_tail(&urb->urb_list, &bh->head);
1761 running = bh->running;
1762 spin_unlock(&bh->lock);
1766 else if (high_prio_bh)
1767 tasklet_hi_schedule(&bh->bh);
1769 tasklet_schedule(&bh->bh);
1771 EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1773 /*-------------------------------------------------------------------------*/
1775 /* Cancel all URBs pending on this endpoint and wait for the endpoint's
1776 * queue to drain completely. The caller must first insure that no more
1777 * URBs can be submitted for this endpoint.
1779 void usb_hcd_flush_endpoint(struct usb_device *udev,
1780 struct usb_host_endpoint *ep)
1782 struct usb_hcd *hcd;
1788 hcd = bus_to_hcd(udev->bus);
1790 /* No more submits can occur */
1791 spin_lock_irq(&hcd_urb_list_lock);
1793 list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) {
1799 is_in = usb_urb_dir_in(urb);
1800 spin_unlock(&hcd_urb_list_lock);
1803 unlink1(hcd, urb, -ESHUTDOWN);
1804 dev_dbg (hcd->self.controller,
1805 "shutdown urb %pK ep%d%s-%s\n",
1806 urb, usb_endpoint_num(&ep->desc),
1807 is_in ? "in" : "out",
1808 usb_ep_type_string(usb_endpoint_type(&ep->desc)));
1811 /* list contents may have changed */
1812 spin_lock(&hcd_urb_list_lock);
1815 spin_unlock_irq(&hcd_urb_list_lock);
1817 /* Wait until the endpoint queue is completely empty */
1818 while (!list_empty (&ep->urb_list)) {
1819 spin_lock_irq(&hcd_urb_list_lock);
1821 /* The list may have changed while we acquired the spinlock */
1823 if (!list_empty (&ep->urb_list)) {
1824 urb = list_entry (ep->urb_list.prev, struct urb,
1828 spin_unlock_irq(&hcd_urb_list_lock);
1838 * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1840 * @udev: target &usb_device
1841 * @new_config: new configuration to install
1842 * @cur_alt: the current alternate interface setting
1843 * @new_alt: alternate interface setting that is being installed
1845 * To change configurations, pass in the new configuration in new_config,
1846 * and pass NULL for cur_alt and new_alt.
1848 * To reset a device's configuration (put the device in the ADDRESSED state),
1849 * pass in NULL for new_config, cur_alt, and new_alt.
1851 * To change alternate interface settings, pass in NULL for new_config,
1852 * pass in the current alternate interface setting in cur_alt,
1853 * and pass in the new alternate interface setting in new_alt.
1855 * Return: An error if the requested bandwidth change exceeds the
1856 * bus bandwidth or host controller internal resources.
1858 int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1859 struct usb_host_config *new_config,
1860 struct usb_host_interface *cur_alt,
1861 struct usb_host_interface *new_alt)
1863 int num_intfs, i, j;
1864 struct usb_host_interface *alt = NULL;
1866 struct usb_hcd *hcd;
1867 struct usb_host_endpoint *ep;
1869 hcd = bus_to_hcd(udev->bus);
1870 if (!hcd->driver->check_bandwidth)
1873 /* Configuration is being removed - set configuration 0 */
1874 if (!new_config && !cur_alt) {
1875 for (i = 1; i < 16; ++i) {
1876 ep = udev->ep_out[i];
1878 hcd->driver->drop_endpoint(hcd, udev, ep);
1879 ep = udev->ep_in[i];
1881 hcd->driver->drop_endpoint(hcd, udev, ep);
1883 hcd->driver->check_bandwidth(hcd, udev);
1886 /* Check if the HCD says there's enough bandwidth. Enable all endpoints
1887 * each interface's alt setting 0 and ask the HCD to check the bandwidth
1888 * of the bus. There will always be bandwidth for endpoint 0, so it's
1892 num_intfs = new_config->desc.bNumInterfaces;
1893 /* Remove endpoints (except endpoint 0, which is always on the
1894 * schedule) from the old config from the schedule
1896 for (i = 1; i < 16; ++i) {
1897 ep = udev->ep_out[i];
1899 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1903 ep = udev->ep_in[i];
1905 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1910 for (i = 0; i < num_intfs; ++i) {
1911 struct usb_host_interface *first_alt;
1914 first_alt = &new_config->intf_cache[i]->altsetting[0];
1915 iface_num = first_alt->desc.bInterfaceNumber;
1916 /* Set up endpoints for alternate interface setting 0 */
1917 alt = usb_find_alt_setting(new_config, iface_num, 0);
1919 /* No alt setting 0? Pick the first setting. */
1922 for (j = 0; j < alt->desc.bNumEndpoints; j++) {
1923 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
1929 if (cur_alt && new_alt) {
1930 struct usb_interface *iface = usb_ifnum_to_if(udev,
1931 cur_alt->desc.bInterfaceNumber);
1935 if (iface->resetting_device) {
1937 * The USB core just reset the device, so the xHCI host
1938 * and the device will think alt setting 0 is installed.
1939 * However, the USB core will pass in the alternate
1940 * setting installed before the reset as cur_alt. Dig
1941 * out the alternate setting 0 structure, or the first
1942 * alternate setting if a broken device doesn't have alt
1945 cur_alt = usb_altnum_to_altsetting(iface, 0);
1947 cur_alt = &iface->altsetting[0];
1950 /* Drop all the endpoints in the current alt setting */
1951 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
1952 ret = hcd->driver->drop_endpoint(hcd, udev,
1953 &cur_alt->endpoint[i]);
1957 /* Add all the endpoints in the new alt setting */
1958 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
1959 ret = hcd->driver->add_endpoint(hcd, udev,
1960 &new_alt->endpoint[i]);
1965 ret = hcd->driver->check_bandwidth(hcd, udev);
1968 hcd->driver->reset_bandwidth(hcd, udev);
1972 /* Disables the endpoint: synchronizes with the hcd to make sure all
1973 * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
1974 * have been called previously. Use for set_configuration, set_interface,
1975 * driver removal, physical disconnect.
1977 * example: a qh stored in ep->hcpriv, holding state related to endpoint
1978 * type, maxpacket size, toggle, halt status, and scheduling.
1980 void usb_hcd_disable_endpoint(struct usb_device *udev,
1981 struct usb_host_endpoint *ep)
1983 struct usb_hcd *hcd;
1986 hcd = bus_to_hcd(udev->bus);
1987 if (hcd->driver->endpoint_disable)
1988 hcd->driver->endpoint_disable(hcd, ep);
1992 * usb_hcd_reset_endpoint - reset host endpoint state
1993 * @udev: USB device.
1994 * @ep: the endpoint to reset.
1996 * Resets any host endpoint state such as the toggle bit, sequence
1997 * number and current window.
1999 void usb_hcd_reset_endpoint(struct usb_device *udev,
2000 struct usb_host_endpoint *ep)
2002 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2004 if (hcd->driver->endpoint_reset)
2005 hcd->driver->endpoint_reset(hcd, ep);
2007 int epnum = usb_endpoint_num(&ep->desc);
2008 int is_out = usb_endpoint_dir_out(&ep->desc);
2009 int is_control = usb_endpoint_xfer_control(&ep->desc);
2011 usb_settoggle(udev, epnum, is_out, 0);
2013 usb_settoggle(udev, epnum, !is_out, 0);
2018 * usb_alloc_streams - allocate bulk endpoint stream IDs.
2019 * @interface: alternate setting that includes all endpoints.
2020 * @eps: array of endpoints that need streams.
2021 * @num_eps: number of endpoints in the array.
2022 * @num_streams: number of streams to allocate.
2023 * @mem_flags: flags hcd should use to allocate memory.
2025 * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
2026 * Drivers may queue multiple transfers to different stream IDs, which may
2027 * complete in a different order than they were queued.
2029 * Return: On success, the number of allocated streams. On failure, a negative
2032 int usb_alloc_streams(struct usb_interface *interface,
2033 struct usb_host_endpoint **eps, unsigned int num_eps,
2034 unsigned int num_streams, gfp_t mem_flags)
2036 struct usb_hcd *hcd;
2037 struct usb_device *dev;
2040 dev = interface_to_usbdev(interface);
2041 hcd = bus_to_hcd(dev->bus);
2042 if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
2044 if (dev->speed < USB_SPEED_SUPER)
2046 if (dev->state < USB_STATE_CONFIGURED)
2049 for (i = 0; i < num_eps; i++) {
2050 /* Streams only apply to bulk endpoints. */
2051 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
2053 /* Re-alloc is not allowed */
2054 if (eps[i]->streams)
2058 ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
2059 num_streams, mem_flags);
2063 for (i = 0; i < num_eps; i++)
2064 eps[i]->streams = ret;
2068 EXPORT_SYMBOL_GPL(usb_alloc_streams);
2071 * usb_free_streams - free bulk endpoint stream IDs.
2072 * @interface: alternate setting that includes all endpoints.
2073 * @eps: array of endpoints to remove streams from.
2074 * @num_eps: number of endpoints in the array.
2075 * @mem_flags: flags hcd should use to allocate memory.
2077 * Reverts a group of bulk endpoints back to not using stream IDs.
2078 * Can fail if we are given bad arguments, or HCD is broken.
2080 * Return: 0 on success. On failure, a negative error code.
2082 int usb_free_streams(struct usb_interface *interface,
2083 struct usb_host_endpoint **eps, unsigned int num_eps,
2086 struct usb_hcd *hcd;
2087 struct usb_device *dev;
2090 dev = interface_to_usbdev(interface);
2091 hcd = bus_to_hcd(dev->bus);
2092 if (dev->speed < USB_SPEED_SUPER)
2095 /* Double-free is not allowed */
2096 for (i = 0; i < num_eps; i++)
2097 if (!eps[i] || !eps[i]->streams)
2100 ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
2104 for (i = 0; i < num_eps; i++)
2105 eps[i]->streams = 0;
2109 EXPORT_SYMBOL_GPL(usb_free_streams);
2111 /* Protect against drivers that try to unlink URBs after the device
2112 * is gone, by waiting until all unlinks for @udev are finished.
2113 * Since we don't currently track URBs by device, simply wait until
2114 * nothing is running in the locked region of usb_hcd_unlink_urb().
2116 void usb_hcd_synchronize_unlinks(struct usb_device *udev)
2118 spin_lock_irq(&hcd_urb_unlink_lock);
2119 spin_unlock_irq(&hcd_urb_unlink_lock);
2122 /*-------------------------------------------------------------------------*/
2124 /* called in any context */
2125 int usb_hcd_get_frame_number (struct usb_device *udev)
2127 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2129 if (!HCD_RH_RUNNING(hcd))
2131 return hcd->driver->get_frame_number (hcd);
2134 /*-------------------------------------------------------------------------*/
2135 #ifdef CONFIG_USB_HCD_TEST_MODE
2137 static void usb_ehset_completion(struct urb *urb)
2139 struct completion *done = urb->context;
2144 * Allocate and initialize a control URB. This request will be used by the
2145 * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
2146 * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
2147 * Return NULL if failed.
2149 static struct urb *request_single_step_set_feature_urb(
2150 struct usb_device *udev,
2153 struct completion *done)
2156 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2157 struct usb_host_endpoint *ep;
2159 urb = usb_alloc_urb(0, GFP_KERNEL);
2163 urb->pipe = usb_rcvctrlpipe(udev, 0);
2164 ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out)
2165 [usb_pipeendpoint(urb->pipe)];
2173 urb->setup_packet = (void *)dr;
2174 urb->transfer_buffer = buf;
2175 urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
2176 urb->complete = usb_ehset_completion;
2177 urb->status = -EINPROGRESS;
2178 urb->actual_length = 0;
2179 urb->transfer_flags = URB_DIR_IN;
2181 atomic_inc(&urb->use_count);
2182 atomic_inc(&urb->dev->urbnum);
2183 if (map_urb_for_dma(hcd, urb, GFP_KERNEL)) {
2189 urb->context = done;
2193 int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
2195 int retval = -ENOMEM;
2196 struct usb_ctrlrequest *dr;
2198 struct usb_device *udev;
2199 struct usb_device_descriptor *buf;
2200 DECLARE_COMPLETION_ONSTACK(done);
2202 /* Obtain udev of the rhub's child port */
2203 udev = usb_hub_find_child(hcd->self.root_hub, port);
2205 dev_err(hcd->self.controller, "No device attached to the RootHub\n");
2208 buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
2212 dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
2218 /* Fill Setup packet for GetDescriptor */
2219 dr->bRequestType = USB_DIR_IN;
2220 dr->bRequest = USB_REQ_GET_DESCRIPTOR;
2221 dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
2223 dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
2224 urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
2228 /* Submit just the SETUP stage */
2229 retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 1);
2232 if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
2234 retval = -ETIMEDOUT;
2235 dev_err(hcd->self.controller,
2236 "%s SETUP stage timed out on ep0\n", __func__);
2241 /* Complete remaining DATA and STATUS stages using the same URB */
2242 urb->status = -EINPROGRESS;
2244 atomic_inc(&urb->use_count);
2245 atomic_inc(&urb->dev->urbnum);
2246 retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 0);
2247 if (!retval && !wait_for_completion_timeout(&done,
2248 msecs_to_jiffies(2000))) {
2250 retval = -ETIMEDOUT;
2251 dev_err(hcd->self.controller,
2252 "%s IN stage timed out on ep0\n", __func__);
2261 EXPORT_SYMBOL_GPL(ehset_single_step_set_feature);
2262 #endif /* CONFIG_USB_HCD_TEST_MODE */
2264 /*-------------------------------------------------------------------------*/
2268 int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
2270 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2272 int old_state = hcd->state;
2274 dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
2275 (PMSG_IS_AUTO(msg) ? "auto-" : ""),
2276 rhdev->do_remote_wakeup);
2277 if (HCD_DEAD(hcd)) {
2278 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
2282 if (!hcd->driver->bus_suspend) {
2285 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2286 hcd->state = HC_STATE_QUIESCING;
2287 status = hcd->driver->bus_suspend(hcd);
2290 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
2291 hcd->state = HC_STATE_SUSPENDED;
2293 if (!PMSG_IS_AUTO(msg))
2294 usb_phy_roothub_suspend(hcd->self.sysdev,
2297 /* Did we race with a root-hub wakeup event? */
2298 if (rhdev->do_remote_wakeup) {
2301 status = hcd->driver->hub_status_data(hcd, buffer);
2303 dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
2304 hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
2309 spin_lock_irq(&hcd_root_hub_lock);
2310 if (!HCD_DEAD(hcd)) {
2311 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2312 hcd->state = old_state;
2314 spin_unlock_irq(&hcd_root_hub_lock);
2315 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2321 int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
2323 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2325 int old_state = hcd->state;
2327 dev_dbg(&rhdev->dev, "usb %sresume\n",
2328 (PMSG_IS_AUTO(msg) ? "auto-" : ""));
2329 if (HCD_DEAD(hcd)) {
2330 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2334 if (!PMSG_IS_AUTO(msg)) {
2335 status = usb_phy_roothub_resume(hcd->self.sysdev,
2341 if (!hcd->driver->bus_resume)
2343 if (HCD_RH_RUNNING(hcd))
2346 hcd->state = HC_STATE_RESUMING;
2347 status = hcd->driver->bus_resume(hcd);
2348 clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2350 status = usb_phy_roothub_calibrate(hcd->phy_roothub);
2353 struct usb_device *udev;
2356 spin_lock_irq(&hcd_root_hub_lock);
2357 if (!HCD_DEAD(hcd)) {
2358 usb_set_device_state(rhdev, rhdev->actconfig
2359 ? USB_STATE_CONFIGURED
2360 : USB_STATE_ADDRESS);
2361 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2362 hcd->state = HC_STATE_RUNNING;
2364 spin_unlock_irq(&hcd_root_hub_lock);
2367 * Check whether any of the enabled ports on the root hub are
2368 * unsuspended. If they are then a TRSMRCY delay is needed
2369 * (this is what the USB-2 spec calls a "global resume").
2370 * Otherwise we can skip the delay.
2372 usb_hub_for_each_child(rhdev, port1, udev) {
2373 if (udev->state != USB_STATE_NOTATTACHED &&
2374 !udev->port_is_suspended) {
2375 usleep_range(10000, 11000); /* TRSMRCY */
2380 hcd->state = old_state;
2381 usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub);
2382 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2384 if (status != -ESHUTDOWN)
2390 /* Workqueue routine for root-hub remote wakeup */
2391 static void hcd_resume_work(struct work_struct *work)
2393 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2394 struct usb_device *udev = hcd->self.root_hub;
2396 usb_remote_wakeup(udev);
2400 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2401 * @hcd: host controller for this root hub
2403 * The USB host controller calls this function when its root hub is
2404 * suspended (with the remote wakeup feature enabled) and a remote
2405 * wakeup request is received. The routine submits a workqueue request
2406 * to resume the root hub (that is, manage its downstream ports again).
2408 void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2410 unsigned long flags;
2412 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2413 if (hcd->rh_registered) {
2414 pm_wakeup_event(&hcd->self.root_hub->dev, 0);
2415 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2416 queue_work(pm_wq, &hcd->wakeup_work);
2418 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2420 EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2422 #endif /* CONFIG_PM */
2424 /*-------------------------------------------------------------------------*/
2426 #ifdef CONFIG_USB_OTG
2429 * usb_bus_start_enum - start immediate enumeration (for OTG)
2430 * @bus: the bus (must use hcd framework)
2431 * @port_num: 1-based number of port; usually bus->otg_port
2434 * Starts enumeration, with an immediate reset followed later by
2435 * hub_wq identifying and possibly configuring the device.
2436 * This is needed by OTG controller drivers, where it helps meet
2437 * HNP protocol timing requirements for starting a port reset.
2439 * Return: 0 if successful.
2441 int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2443 struct usb_hcd *hcd;
2444 int status = -EOPNOTSUPP;
2446 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2447 * boards with root hubs hooked up to internal devices (instead of
2448 * just the OTG port) may need more attention to resetting...
2450 hcd = bus_to_hcd(bus);
2451 if (port_num && hcd->driver->start_port_reset)
2452 status = hcd->driver->start_port_reset(hcd, port_num);
2454 /* allocate hub_wq shortly after (first) root port reset finishes;
2455 * it may issue others, until at least 50 msecs have passed.
2458 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2461 EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2465 /*-------------------------------------------------------------------------*/
2468 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2469 * @irq: the IRQ being raised
2470 * @__hcd: pointer to the HCD whose IRQ is being signaled
2472 * If the controller isn't HALTed, calls the driver's irq handler.
2473 * Checks whether the controller is now dead.
2475 * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
2477 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2479 struct usb_hcd *hcd = __hcd;
2482 if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
2484 else if (hcd->driver->irq(hcd) == IRQ_NONE)
2491 EXPORT_SYMBOL_GPL(usb_hcd_irq);
2493 /*-------------------------------------------------------------------------*/
2495 /* Workqueue routine for when the root-hub has died. */
2496 static void hcd_died_work(struct work_struct *work)
2498 struct usb_hcd *hcd = container_of(work, struct usb_hcd, died_work);
2499 static char *env[] = {
2504 /* Notify user space that the host controller has died */
2505 kobject_uevent_env(&hcd->self.root_hub->dev.kobj, KOBJ_OFFLINE, env);
2509 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2510 * @hcd: pointer to the HCD representing the controller
2512 * This is called by bus glue to report a USB host controller that died
2513 * while operations may still have been pending. It's called automatically
2514 * by the PCI glue, so only glue for non-PCI busses should need to call it.
2516 * Only call this function with the primary HCD.
2518 void usb_hc_died (struct usb_hcd *hcd)
2520 unsigned long flags;
2522 dev_err (hcd->self.controller, "HC died; cleaning up\n");
2524 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2525 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2526 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2527 if (hcd->rh_registered) {
2528 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2530 /* make hub_wq clean up old urbs and devices */
2531 usb_set_device_state (hcd->self.root_hub,
2532 USB_STATE_NOTATTACHED);
2533 usb_kick_hub_wq(hcd->self.root_hub);
2535 if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2536 hcd = hcd->shared_hcd;
2537 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2538 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2539 if (hcd->rh_registered) {
2540 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2542 /* make hub_wq clean up old urbs and devices */
2543 usb_set_device_state(hcd->self.root_hub,
2544 USB_STATE_NOTATTACHED);
2545 usb_kick_hub_wq(hcd->self.root_hub);
2549 /* Handle the case where this function gets called with a shared HCD */
2550 if (usb_hcd_is_primary_hcd(hcd))
2551 schedule_work(&hcd->died_work);
2553 schedule_work(&hcd->primary_hcd->died_work);
2555 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2556 /* Make sure that the other roothub is also deallocated. */
2558 EXPORT_SYMBOL_GPL (usb_hc_died);
2560 /*-------------------------------------------------------------------------*/
2562 static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
2565 spin_lock_init(&bh->lock);
2566 INIT_LIST_HEAD(&bh->head);
2567 tasklet_setup(&bh->bh, usb_giveback_urb_bh);
2570 struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
2571 struct device *sysdev, struct device *dev, const char *bus_name,
2572 struct usb_hcd *primary_hcd)
2574 struct usb_hcd *hcd;
2576 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2579 if (primary_hcd == NULL) {
2580 hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
2582 if (!hcd->address0_mutex) {
2584 dev_dbg(dev, "hcd address0 mutex alloc failed\n");
2587 mutex_init(hcd->address0_mutex);
2588 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2590 if (!hcd->bandwidth_mutex) {
2591 kfree(hcd->address0_mutex);
2593 dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2596 mutex_init(hcd->bandwidth_mutex);
2597 dev_set_drvdata(dev, hcd);
2599 mutex_lock(&usb_port_peer_mutex);
2600 hcd->address0_mutex = primary_hcd->address0_mutex;
2601 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2602 hcd->primary_hcd = primary_hcd;
2603 primary_hcd->primary_hcd = primary_hcd;
2604 hcd->shared_hcd = primary_hcd;
2605 primary_hcd->shared_hcd = hcd;
2606 mutex_unlock(&usb_port_peer_mutex);
2609 kref_init(&hcd->kref);
2611 usb_bus_init(&hcd->self);
2612 hcd->self.controller = dev;
2613 hcd->self.sysdev = sysdev;
2614 hcd->self.bus_name = bus_name;
2616 timer_setup(&hcd->rh_timer, rh_timer_func, 0);
2618 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2621 INIT_WORK(&hcd->died_work, hcd_died_work);
2623 hcd->driver = driver;
2624 hcd->speed = driver->flags & HCD_MASK;
2625 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2626 "USB Host Controller";
2629 EXPORT_SYMBOL_GPL(__usb_create_hcd);
2632 * usb_create_shared_hcd - create and initialize an HCD structure
2633 * @driver: HC driver that will use this hcd
2634 * @dev: device for this HC, stored in hcd->self.controller
2635 * @bus_name: value to store in hcd->self.bus_name
2636 * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2637 * PCI device. Only allocate certain resources for the primary HCD
2639 * Context: task context, might sleep.
2641 * Allocate a struct usb_hcd, with extra space at the end for the
2642 * HC driver's private data. Initialize the generic members of the
2645 * Return: On success, a pointer to the created and initialized HCD structure.
2646 * On failure (e.g. if memory is unavailable), %NULL.
2648 struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2649 struct device *dev, const char *bus_name,
2650 struct usb_hcd *primary_hcd)
2652 return __usb_create_hcd(driver, dev, dev, bus_name, primary_hcd);
2654 EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2657 * usb_create_hcd - create and initialize an HCD structure
2658 * @driver: HC driver that will use this hcd
2659 * @dev: device for this HC, stored in hcd->self.controller
2660 * @bus_name: value to store in hcd->self.bus_name
2662 * Context: task context, might sleep.
2664 * Allocate a struct usb_hcd, with extra space at the end for the
2665 * HC driver's private data. Initialize the generic members of the
2668 * Return: On success, a pointer to the created and initialized HCD
2669 * structure. On failure (e.g. if memory is unavailable), %NULL.
2671 struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2672 struct device *dev, const char *bus_name)
2674 return __usb_create_hcd(driver, dev, dev, bus_name, NULL);
2676 EXPORT_SYMBOL_GPL(usb_create_hcd);
2679 * Roothubs that share one PCI device must also share the bandwidth mutex.
2680 * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2683 * Make sure to deallocate the bandwidth_mutex only when the last HCD is
2684 * freed. When hcd_release() is called for either hcd in a peer set,
2685 * invalidate the peer's ->shared_hcd and ->primary_hcd pointers.
2687 static void hcd_release(struct kref *kref)
2689 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2691 mutex_lock(&usb_port_peer_mutex);
2692 if (hcd->shared_hcd) {
2693 struct usb_hcd *peer = hcd->shared_hcd;
2695 peer->shared_hcd = NULL;
2696 peer->primary_hcd = NULL;
2698 kfree(hcd->address0_mutex);
2699 kfree(hcd->bandwidth_mutex);
2701 mutex_unlock(&usb_port_peer_mutex);
2705 struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2708 kref_get (&hcd->kref);
2711 EXPORT_SYMBOL_GPL(usb_get_hcd);
2713 void usb_put_hcd (struct usb_hcd *hcd)
2716 kref_put (&hcd->kref, hcd_release);
2718 EXPORT_SYMBOL_GPL(usb_put_hcd);
2720 int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2722 if (!hcd->primary_hcd)
2724 return hcd == hcd->primary_hcd;
2726 EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2728 int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
2730 if (!hcd->driver->find_raw_port_number)
2733 return hcd->driver->find_raw_port_number(hcd, port1);
2736 static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2737 unsigned int irqnum, unsigned long irqflags)
2741 if (hcd->driver->irq) {
2743 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2744 hcd->driver->description, hcd->self.busnum);
2745 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2746 hcd->irq_descr, hcd);
2748 dev_err(hcd->self.controller,
2749 "request interrupt %d failed\n",
2754 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2755 (hcd->driver->flags & HCD_MEMORY) ?
2756 "io mem" : "io port",
2757 (unsigned long long)hcd->rsrc_start);
2760 if (hcd->rsrc_start)
2761 dev_info(hcd->self.controller, "%s 0x%08llx\n",
2762 (hcd->driver->flags & HCD_MEMORY) ?
2763 "io mem" : "io port",
2764 (unsigned long long)hcd->rsrc_start);
2770 * Before we free this root hub, flush in-flight peering attempts
2771 * and disable peer lookups
2773 static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
2775 struct usb_device *rhdev;
2777 mutex_lock(&usb_port_peer_mutex);
2778 rhdev = hcd->self.root_hub;
2779 hcd->self.root_hub = NULL;
2780 mutex_unlock(&usb_port_peer_mutex);
2785 * usb_stop_hcd - Halt the HCD
2786 * @hcd: the usb_hcd that has to be halted
2788 * Stop the root-hub polling timer and invoke the HCD's ->stop callback.
2790 static void usb_stop_hcd(struct usb_hcd *hcd)
2792 hcd->rh_pollable = 0;
2793 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2794 del_timer_sync(&hcd->rh_timer);
2796 hcd->driver->stop(hcd);
2797 hcd->state = HC_STATE_HALT;
2799 /* In case the HCD restarted the timer, stop it again. */
2800 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2801 del_timer_sync(&hcd->rh_timer);
2805 * usb_add_hcd - finish generic HCD structure initialization and register
2806 * @hcd: the usb_hcd structure to initialize
2807 * @irqnum: Interrupt line to allocate
2808 * @irqflags: Interrupt type flags
2810 * Finish the remaining parts of generic HCD initialization: allocate the
2811 * buffers of consistent memory, register the bus, request the IRQ line,
2812 * and call the driver's reset() and start() routines.
2814 int usb_add_hcd(struct usb_hcd *hcd,
2815 unsigned int irqnum, unsigned long irqflags)
2818 struct usb_device *rhdev;
2820 if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
2821 hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
2822 if (IS_ERR(hcd->phy_roothub))
2823 return PTR_ERR(hcd->phy_roothub);
2825 retval = usb_phy_roothub_init(hcd->phy_roothub);
2829 retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
2830 PHY_MODE_USB_HOST_SS);
2832 retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
2835 goto err_usb_phy_roothub_power_on;
2837 retval = usb_phy_roothub_power_on(hcd->phy_roothub);
2839 goto err_usb_phy_roothub_power_on;
2842 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2844 switch (authorized_default) {
2845 case USB_AUTHORIZE_NONE:
2846 hcd->dev_policy = USB_DEVICE_AUTHORIZE_NONE;
2849 case USB_AUTHORIZE_ALL:
2850 hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL;
2853 case USB_AUTHORIZE_INTERNAL:
2854 hcd->dev_policy = USB_DEVICE_AUTHORIZE_INTERNAL;
2857 case USB_AUTHORIZE_WIRED:
2859 hcd->dev_policy = hcd->wireless ?
2860 USB_DEVICE_AUTHORIZE_NONE : USB_DEVICE_AUTHORIZE_ALL;
2864 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2866 /* per default all interfaces are authorized */
2867 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
2869 /* HC is in reset state, but accessible. Now do the one-time init,
2870 * bottom up so that hcds can customize the root hubs before hub_wq
2871 * starts talking to them. (Note, bus id is assigned early too.)
2873 retval = hcd_buffer_create(hcd);
2875 dev_dbg(hcd->self.sysdev, "pool alloc failed\n");
2876 goto err_create_buf;
2879 retval = usb_register_bus(&hcd->self);
2881 goto err_register_bus;
2883 rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
2884 if (rhdev == NULL) {
2885 dev_err(hcd->self.sysdev, "unable to allocate root hub\n");
2887 goto err_allocate_root_hub;
2889 mutex_lock(&usb_port_peer_mutex);
2890 hcd->self.root_hub = rhdev;
2891 mutex_unlock(&usb_port_peer_mutex);
2893 rhdev->rx_lanes = 1;
2894 rhdev->tx_lanes = 1;
2895 rhdev->ssp_rate = USB_SSP_GEN_UNKNOWN;
2897 switch (hcd->speed) {
2899 rhdev->speed = USB_SPEED_FULL;
2902 rhdev->speed = USB_SPEED_HIGH;
2905 rhdev->speed = USB_SPEED_WIRELESS;
2908 rhdev->speed = USB_SPEED_SUPER;
2911 rhdev->rx_lanes = 2;
2912 rhdev->tx_lanes = 2;
2913 rhdev->ssp_rate = USB_SSP_GEN_2x2;
2914 rhdev->speed = USB_SPEED_SUPER_PLUS;
2917 rhdev->ssp_rate = USB_SSP_GEN_2x1;
2918 rhdev->speed = USB_SPEED_SUPER_PLUS;
2922 goto err_set_rh_speed;
2925 /* wakeup flag init defaults to "everything works" for root hubs,
2926 * but drivers can override it in reset() if needed, along with
2927 * recording the overall controller's system wakeup capability.
2929 device_set_wakeup_capable(&rhdev->dev, 1);
2931 /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2932 * registered. But since the controller can die at any time,
2933 * let's initialize the flag before touching the hardware.
2935 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2937 /* "reset" is misnamed; its role is now one-time init. the controller
2938 * should already have been reset (and boot firmware kicked off etc).
2940 if (hcd->driver->reset) {
2941 retval = hcd->driver->reset(hcd);
2943 dev_err(hcd->self.controller, "can't setup: %d\n",
2945 goto err_hcd_driver_setup;
2948 hcd->rh_pollable = 1;
2950 retval = usb_phy_roothub_calibrate(hcd->phy_roothub);
2952 goto err_hcd_driver_setup;
2954 /* NOTE: root hub and controller capabilities may not be the same */
2955 if (device_can_wakeup(hcd->self.controller)
2956 && device_can_wakeup(&hcd->self.root_hub->dev))
2957 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2959 /* initialize tasklets */
2960 init_giveback_urb_bh(&hcd->high_prio_bh);
2961 init_giveback_urb_bh(&hcd->low_prio_bh);
2963 /* enable irqs just before we start the controller,
2964 * if the BIOS provides legacy PCI irqs.
2966 if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
2967 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2969 goto err_request_irq;
2972 hcd->state = HC_STATE_RUNNING;
2973 retval = hcd->driver->start(hcd);
2975 dev_err(hcd->self.controller, "startup error %d\n", retval);
2976 goto err_hcd_driver_start;
2979 /* starting here, usbcore will pay attention to this root hub */
2980 retval = register_root_hub(hcd);
2982 goto err_register_root_hub;
2984 if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2985 usb_hcd_poll_rh_status(hcd);
2989 err_register_root_hub:
2991 err_hcd_driver_start:
2992 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
2993 free_irq(irqnum, hcd);
2995 err_hcd_driver_setup:
2997 usb_put_invalidate_rhdev(hcd);
2998 err_allocate_root_hub:
2999 usb_deregister_bus(&hcd->self);
3001 hcd_buffer_destroy(hcd);
3003 usb_phy_roothub_power_off(hcd->phy_roothub);
3004 err_usb_phy_roothub_power_on:
3005 usb_phy_roothub_exit(hcd->phy_roothub);
3009 EXPORT_SYMBOL_GPL(usb_add_hcd);
3012 * usb_remove_hcd - shutdown processing for generic HCDs
3013 * @hcd: the usb_hcd structure to remove
3015 * Context: task context, might sleep.
3017 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
3018 * invoking the HCD's stop() method.
3020 void usb_remove_hcd(struct usb_hcd *hcd)
3022 struct usb_device *rhdev = hcd->self.root_hub;
3024 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
3027 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
3028 if (HC_IS_RUNNING (hcd->state))
3029 hcd->state = HC_STATE_QUIESCING;
3031 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
3032 spin_lock_irq (&hcd_root_hub_lock);
3033 hcd->rh_registered = 0;
3034 spin_unlock_irq (&hcd_root_hub_lock);
3037 cancel_work_sync(&hcd->wakeup_work);
3039 cancel_work_sync(&hcd->died_work);
3041 mutex_lock(&usb_bus_idr_lock);
3042 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
3043 mutex_unlock(&usb_bus_idr_lock);
3046 * tasklet_kill() isn't needed here because:
3047 * - driver's disconnect() called from usb_disconnect() should
3048 * make sure its URBs are completed during the disconnect()
3051 * - it is too late to run complete() here since driver may have
3052 * been removed already now
3055 /* Prevent any more root-hub status calls from the timer.
3056 * The HCD might still restart the timer (if a port status change
3057 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
3058 * the hub_status_data() callback.
3062 if (usb_hcd_is_primary_hcd(hcd)) {
3064 free_irq(hcd->irq, hcd);
3067 usb_deregister_bus(&hcd->self);
3068 hcd_buffer_destroy(hcd);
3070 usb_phy_roothub_power_off(hcd->phy_roothub);
3071 usb_phy_roothub_exit(hcd->phy_roothub);
3073 usb_put_invalidate_rhdev(hcd);
3076 EXPORT_SYMBOL_GPL(usb_remove_hcd);
3079 usb_hcd_platform_shutdown(struct platform_device *dev)
3081 struct usb_hcd *hcd = platform_get_drvdata(dev);
3083 /* No need for pm_runtime_put(), we're shutting down */
3084 pm_runtime_get_sync(&dev->dev);
3086 if (hcd->driver->shutdown)
3087 hcd->driver->shutdown(hcd);
3089 EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
3091 int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
3092 dma_addr_t dma, size_t size)
3097 hcd->localmem_pool = devm_gen_pool_create(hcd->self.sysdev, 4,
3098 dev_to_node(hcd->self.sysdev),
3099 dev_name(hcd->self.sysdev));
3100 if (IS_ERR(hcd->localmem_pool))
3101 return PTR_ERR(hcd->localmem_pool);
3103 local_mem = devm_memremap(hcd->self.sysdev, phys_addr,
3105 if (IS_ERR(local_mem))
3106 return PTR_ERR(local_mem);
3109 * Here we pass a dma_addr_t but the arg type is a phys_addr_t.
3110 * It's not backed by system memory and thus there's no kernel mapping
3113 err = gen_pool_add_virt(hcd->localmem_pool, (unsigned long)local_mem,
3114 dma, size, dev_to_node(hcd->self.sysdev));
3116 dev_err(hcd->self.sysdev, "gen_pool_add_virt failed with %d\n",
3123 EXPORT_SYMBOL_GPL(usb_hcd_setup_local_mem);
3125 /*-------------------------------------------------------------------------*/
3127 #if IS_ENABLED(CONFIG_USB_MON)
3129 const struct usb_mon_operations *mon_ops;
3132 * The registration is unlocked.
3133 * We do it this way because we do not want to lock in hot paths.
3135 * Notice that the code is minimally error-proof. Because usbmon needs
3136 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
3139 int usb_mon_register(const struct usb_mon_operations *ops)
3149 EXPORT_SYMBOL_GPL (usb_mon_register);
3151 void usb_mon_deregister (void)
3154 if (mon_ops == NULL) {
3155 printk(KERN_ERR "USB: monitor was not registered\n");
3161 EXPORT_SYMBOL_GPL (usb_mon_deregister);
3163 #endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */