drivers/usb/chipidea/core.c

   1 /*
   2  * core.c - ChipIdea USB IP core family device controller
   3  *
   4  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
   5  *
   6  * Author: David Lopo
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 /*
  14  * Description: ChipIdea USB IP core family device controller
  15  *
  16  * This driver is composed of several blocks:
  17  * - HW:     hardware interface
  18  * - DBG:    debug facilities (optional)
  19  * - UTIL:   utilities
  20  * - ISR:    interrupts handling
  21  * - ENDPT:  endpoint operations (Gadget API)
  22  * - GADGET: gadget operations (Gadget API)
  23  * - BUS:    bus glue code, bus abstraction layer
  24  *
  25  * Compile Options
  26  * - STALL_IN:  non-empty bulk-in pipes cannot be halted
  27  *              if defined mass storage compliance succeeds but with warnings
  28  *              => case 4: Hi >  Dn
  29  *              => case 5: Hi >  Di
  30  *              => case 8: Hi <> Do
  31  *              if undefined usbtest 13 fails
  32  * - TRACE:     enable function tracing (depends on DEBUG)
  33  *
  34  * Main Features
  35  * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
  36  * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
  37  * - Normal & LPM support
  38  *
  39  * USBTEST Report
  40  * - OK: 0-12, 13 (STALL_IN defined) & 14
  41  * - Not Supported: 15 & 16 (ISO)
  42  *
  43  * TODO List
  44  * - Suspend & Remote Wakeup
  45  */
  46 #include <linux/delay.h>
  47 #include <linux/device.h>
  48 #include <linux/dma-mapping.h>
  49 #include <linux/extcon.h>
  50 #include <linux/phy/phy.h>
  51 #include <linux/platform_device.h>
  52 #include <linux/module.h>
  53 #include <linux/idr.h>
  54 #include <linux/interrupt.h>
  55 #include <linux/io.h>
  56 #include <linux/kernel.h>
  57 #include <linux/slab.h>
  58 #include <linux/pm_runtime.h>
  59 #include <linux/usb/ch9.h>
  60 #include <linux/usb/gadget.h>
  61 #include <linux/usb/otg.h>
  62 #include <linux/usb/chipidea.h>
  63 #include <linux/usb/of.h>
  64 #include <linux/of.h>
  65 #include <linux/regulator/consumer.h>
  66 #include <linux/usb/ehci_def.h>
  67
  68 #include "ci.h"
  69 #include "udc.h"
  70 #include "bits.h"
  71 #include "host.h"
  72 #include "otg.h"
  73 #include "otg_fsm.h"
  74
  75 /* Controller register map */
  76 static const u8 ci_regs_nolpm[] = {
  77         [CAP_CAPLENGTH]         = 0x00U,
  78         [CAP_HCCPARAMS]         = 0x08U,
  79         [CAP_DCCPARAMS]         = 0x24U,
  80         [CAP_TESTMODE]          = 0x38U,
  81         [OP_USBCMD]             = 0x00U,
  82         [OP_USBSTS]             = 0x04U,
  83         [OP_USBINTR]            = 0x08U,
  84         [OP_DEVICEADDR]         = 0x14U,
  85         [OP_ENDPTLISTADDR]      = 0x18U,
  86         [OP_TTCTRL]             = 0x1CU,
  87         [OP_BURSTSIZE]          = 0x20U,
  88         [OP_ULPI_VIEWPORT]      = 0x30U,
  89         [OP_PORTSC]             = 0x44U,
  90         [OP_DEVLC]              = 0x84U,
  91         [OP_OTGSC]              = 0x64U,
  92         [OP_USBMODE]            = 0x68U,
  93         [OP_ENDPTSETUPSTAT]     = 0x6CU,
  94         [OP_ENDPTPRIME]         = 0x70U,
  95         [OP_ENDPTFLUSH]         = 0x74U,
  96         [OP_ENDPTSTAT]          = 0x78U,
  97         [OP_ENDPTCOMPLETE]      = 0x7CU,
  98         [OP_ENDPTCTRL]          = 0x80U,
  99 };
 100
 101 static const u8 ci_regs_lpm[] = {
 102         [CAP_CAPLENGTH]         = 0x00U,
 103         [CAP_HCCPARAMS]         = 0x08U,
 104         [CAP_DCCPARAMS]         = 0x24U,
 105         [CAP_TESTMODE]          = 0xFCU,
 106         [OP_USBCMD]             = 0x00U,
 107         [OP_USBSTS]             = 0x04U,
 108         [OP_USBINTR]            = 0x08U,
 109         [OP_DEVICEADDR]         = 0x14U,
 110         [OP_ENDPTLISTADDR]      = 0x18U,
 111         [OP_TTCTRL]             = 0x1CU,
 112         [OP_BURSTSIZE]          = 0x20U,
 113         [OP_ULPI_VIEWPORT]      = 0x30U,
 114         [OP_PORTSC]             = 0x44U,
 115         [OP_DEVLC]              = 0x84U,
 116         [OP_OTGSC]              = 0xC4U,
 117         [OP_USBMODE]            = 0xC8U,
 118         [OP_ENDPTSETUPSTAT]     = 0xD8U,
 119         [OP_ENDPTPRIME]         = 0xDCU,
 120         [OP_ENDPTFLUSH]         = 0xE0U,
 121         [OP_ENDPTSTAT]          = 0xE4U,
 122         [OP_ENDPTCOMPLETE]      = 0xE8U,
 123         [OP_ENDPTCTRL]          = 0xECU,
 124 };
 125
 126 static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
 127 {
 128         int i;
 129
 130         for (i = 0; i < OP_ENDPTCTRL; i++)
 131                 ci->hw_bank.regmap[i] =
 132                         (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
 133                         (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
 134
 135         for (; i <= OP_LAST; i++)
 136                 ci->hw_bank.regmap[i] = ci->hw_bank.op +
 137                         4 * (i - OP_ENDPTCTRL) +
 138                         (is_lpm
 139                          ? ci_regs_lpm[OP_ENDPTCTRL]
 140                          : ci_regs_nolpm[OP_ENDPTCTRL]);
 141
 142 }
 143
 144 static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
 145 {
 146         int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
 147         enum ci_revision rev = CI_REVISION_UNKNOWN;
 148
 149         if (ver == 0x2) {
 150                 rev = hw_read_id_reg(ci, ID_ID, REVISION)
 151                         >> __ffs(REVISION);
 152                 rev += CI_REVISION_20;
 153         } else if (ver == 0x0) {
 154                 rev = CI_REVISION_1X;
 155         }
 156
 157         return rev;
 158 }
 159
 160 /**
 161  * hw_read_intr_enable: returns interrupt enable register
 162  *
 163  * @ci: the controller
 164  *
 165  * This function returns register data
 166  */
 167 u32 hw_read_intr_enable(struct ci_hdrc *ci)
 168 {
 169         return hw_read(ci, OP_USBINTR, ~0);
 170 }
 171
 172 /**
 173  * hw_read_intr_status: returns interrupt status register
 174  *
 175  * @ci: the controller
 176  *
 177  * This function returns register data
 178  */
 179 u32 hw_read_intr_status(struct ci_hdrc *ci)
 180 {
 181         return hw_read(ci, OP_USBSTS, ~0);
 182 }
 183
 184 /**
 185  * hw_port_test_set: writes port test mode (execute without interruption)
 186  * @mode: new value
 187  *
 188  * This function returns an error code
 189  */
 190 int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
 191 {
 192         const u8 TEST_MODE_MAX = 7;
 193
 194         if (mode > TEST_MODE_MAX)
 195                 return -EINVAL;
 196
 197         hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
 198         return 0;
 199 }
 200
 201 /**
 202  * hw_port_test_get: reads port test mode value
 203  *
 204  * @ci: the controller
 205  *
 206  * This function returns port test mode value
 207  */
 208 u8 hw_port_test_get(struct ci_hdrc *ci)
 209 {
 210         return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
 211 }
 212
 213 static void hw_wait_phy_stable(void)
 214 {
 215         /*
 216          * The phy needs some delay to output the stable status from low
 217          * power mode. And for OTGSC, the status inputs are debounced
 218          * using a 1 ms time constant, so, delay 2ms for controller to get
 219          * the stable status, like vbus and id when the phy leaves low power.
 220          */
 221         usleep_range(2000, 2500);
 222 }
 223
 224 /* The PHY enters/leaves low power mode */
 225 static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
 226 {
 227         enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
 228         bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
 229
 230         if (enable && !lpm)
 231                 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
 232                                 PORTSC_PHCD(ci->hw_bank.lpm));
 233         else if (!enable && lpm)
 234                 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
 235                                 0);
 236 }
 237
 238 static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
 239 {
 240         u32 reg;
 241
 242         /* bank is a module variable */
 243         ci->hw_bank.abs = base;
 244
 245         ci->hw_bank.cap = ci->hw_bank.abs;
 246         ci->hw_bank.cap += ci->platdata->capoffset;
 247         ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
 248
 249         hw_alloc_regmap(ci, false);
 250         reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
 251                 __ffs(HCCPARAMS_LEN);
 252         ci->hw_bank.lpm  = reg;
 253         if (reg)
 254                 hw_alloc_regmap(ci, !!reg);
 255         ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
 256         ci->hw_bank.size += OP_LAST;
 257         ci->hw_bank.size /= sizeof(u32);
 258
 259         reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
 260                 __ffs(DCCPARAMS_DEN);
 261         ci->hw_ep_max = reg * 2;   /* cache hw ENDPT_MAX */
 262
 263         if (ci->hw_ep_max > ENDPT_MAX)
 264                 return -ENODEV;
 265
 266         ci_hdrc_enter_lpm(ci, false);
 267
 268         /* Disable all interrupts bits */
 269         hw_write(ci, OP_USBINTR, 0xffffffff, 0);
 270
 271         /* Clear all interrupts status bits*/
 272         hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
 273
 274         ci->rev = ci_get_revision(ci);
 275
 276         dev_dbg(ci->dev,
 277                 "ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
 278                 ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
 279
 280         /* setup lock mode ? */
 281
 282         /* ENDPTSETUPSTAT is '0' by default */
 283
 284         /* HCSPARAMS.bf.ppc SHOULD BE zero for device */
 285
 286         return 0;
 287 }
 288
 289 void hw_phymode_configure(struct ci_hdrc *ci)
 290 {
 291         u32 portsc, lpm, sts = 0;
 292
 293         switch (ci->platdata->phy_mode) {
 294         case USBPHY_INTERFACE_MODE_UTMI:
 295                 portsc = PORTSC_PTS(PTS_UTMI);
 296                 lpm = DEVLC_PTS(PTS_UTMI);
 297                 break;
 298         case USBPHY_INTERFACE_MODE_UTMIW:
 299                 portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
 300                 lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
 301                 break;
 302         case USBPHY_INTERFACE_MODE_ULPI:
 303                 portsc = PORTSC_PTS(PTS_ULPI);
 304                 lpm = DEVLC_PTS(PTS_ULPI);
 305                 break;
 306         case USBPHY_INTERFACE_MODE_SERIAL:
 307                 portsc = PORTSC_PTS(PTS_SERIAL);
 308                 lpm = DEVLC_PTS(PTS_SERIAL);
 309                 sts = 1;
 310                 break;
 311         case USBPHY_INTERFACE_MODE_HSIC:
 312                 portsc = PORTSC_PTS(PTS_HSIC);
 313                 lpm = DEVLC_PTS(PTS_HSIC);
 314                 break;
 315         default:
 316                 return;
 317         }
 318
 319         if (ci->hw_bank.lpm) {
 320                 hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
 321                 if (sts)
 322                         hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS);
 323         } else {
 324                 hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
 325                 if (sts)
 326                         hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
 327         }
 328 }
 329 EXPORT_SYMBOL_GPL(hw_phymode_configure);
 330
 331 /**
 332  * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
 333  * interfaces
 334  * @ci: the controller
 335  *
 336  * This function returns an error code if the phy failed to init
 337  */
 338 static int _ci_usb_phy_init(struct ci_hdrc *ci)
 339 {
 340         int ret;
 341
 342         if (ci->phy) {
 343                 ret = phy_init(ci->phy);
 344                 if (ret)
 345                         return ret;
 346
 347                 ret = phy_power_on(ci->phy);
 348                 if (ret) {
 349                         phy_exit(ci->phy);
 350                         return ret;
 351                 }
 352         } else {
 353                 ret = usb_phy_init(ci->usb_phy);
 354         }
 355
 356         return ret;
 357 }
 358
 359 /**
 360  * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy
 361  * interfaces
 362  * @ci: the controller
 363  */
 364 static void ci_usb_phy_exit(struct ci_hdrc *ci)
 365 {
 366         if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
 367                 return;
 368
 369         if (ci->phy) {
 370                 phy_power_off(ci->phy);
 371                 phy_exit(ci->phy);
 372         } else {
 373                 usb_phy_shutdown(ci->usb_phy);
 374         }
 375 }
 376
 377 /**
 378  * ci_usb_phy_init: initialize phy according to different phy type
 379  * @ci: the controller
 380  *
 381  * This function returns an error code if usb_phy_init has failed
 382  */
 383 static int ci_usb_phy_init(struct ci_hdrc *ci)
 384 {
 385         int ret;
 386
 387         if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
 388                 return 0;
 389
 390         switch (ci->platdata->phy_mode) {
 391         case USBPHY_INTERFACE_MODE_UTMI:
 392         case USBPHY_INTERFACE_MODE_UTMIW:
 393         case USBPHY_INTERFACE_MODE_HSIC:
 394                 ret = _ci_usb_phy_init(ci);
 395                 if (!ret)
 396                         hw_wait_phy_stable();
 397                 else
 398                         return ret;
 399                 hw_phymode_configure(ci);
 400                 break;
 401         case USBPHY_INTERFACE_MODE_ULPI:
 402         case USBPHY_INTERFACE_MODE_SERIAL:
 403                 hw_phymode_configure(ci);
 404                 ret = _ci_usb_phy_init(ci);
 405                 if (ret)
 406                         return ret;
 407                 break;
 408         default:
 409                 ret = _ci_usb_phy_init(ci);
 410                 if (!ret)
 411                         hw_wait_phy_stable();
 412         }
 413
 414         return ret;
 415 }
 416
 417
 418 /**
 419  * ci_platform_configure: do controller configure
 420  * @ci: the controller
 421  *
 422  */
 423 void ci_platform_configure(struct ci_hdrc *ci)
 424 {
 425         bool is_device_mode, is_host_mode;
 426
 427         is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
 428         is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
 429
 430         if (is_device_mode) {
 431                 phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE);
 432
 433                 if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING)
 434                         hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
 435                                  USBMODE_CI_SDIS);
 436         }
 437
 438         if (is_host_mode) {
 439                 phy_set_mode(ci->phy, PHY_MODE_USB_HOST);
 440
 441                 if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING)
 442                         hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
 443                                  USBMODE_CI_SDIS);
 444         }
 445
 446         if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
 447                 if (ci->hw_bank.lpm)
 448                         hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
 449                 else
 450                         hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
 451         }
 452
 453         if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
 454                 hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
 455
 456         hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16);
 457
 458         if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST)
 459                 hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK,
 460                         ci->platdata->ahb_burst_config);
 461
 462         /* override burst size, take effect only when ahb_burst_config is 0 */
 463         if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) {
 464                 if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST)
 465                         hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK,
 466                         ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK));
 467
 468                 if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST)
 469                         hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK,
 470                                 ci->platdata->rx_burst_size);
 471         }
 472 }
 473
 474 /**
 475  * hw_controller_reset: do controller reset
 476  * @ci: the controller
 477   *
 478  * This function returns an error code
 479  */
 480 static int hw_controller_reset(struct ci_hdrc *ci)
 481 {
 482         int count = 0;
 483
 484         hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
 485         while (hw_read(ci, OP_USBCMD, USBCMD_RST)) {
 486                 udelay(10);
 487                 if (count++ > 1000)
 488                         return -ETIMEDOUT;
 489         }
 490
 491         return 0;
 492 }
 493
 494 /**
 495  * hw_device_reset: resets chip (execute without interruption)
 496  * @ci: the controller
 497  *
 498  * This function returns an error code
 499  */
 500 int hw_device_reset(struct ci_hdrc *ci)
 501 {
 502         int ret;
 503
 504         /* should flush & stop before reset */
 505         hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
 506         hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
 507
 508         ret = hw_controller_reset(ci);
 509         if (ret) {
 510                 dev_err(ci->dev, "error resetting controller, ret=%d\n", ret);
 511                 return ret;
 512         }
 513
 514         if (ci->platdata->notify_event) {
 515                 ret = ci->platdata->notify_event(ci,
 516                         CI_HDRC_CONTROLLER_RESET_EVENT);
 517                 if (ret)
 518                         return ret;
 519         }
 520
 521         /* USBMODE should be configured step by step */
 522         hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
 523         hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
 524         /* HW >= 2.3 */
 525         hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
 526
 527         if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) {
 528                 pr_err("cannot enter in %s device mode", ci_role(ci)->name);
 529                 pr_err("lpm = %i", ci->hw_bank.lpm);
 530                 return -ENODEV;
 531         }
 532
 533         ci_platform_configure(ci);
 534
 535         return 0;
 536 }
 537
 538 static irqreturn_t ci_irq(int irq, void *data)
 539 {
 540         struct ci_hdrc *ci = data;
 541         irqreturn_t ret = IRQ_NONE;
 542         u32 otgsc = 0;
 543
 544         if (ci->in_lpm) {
 545                 disable_irq_nosync(irq);
 546                 ci->wakeup_int = true;
 547                 pm_runtime_get(ci->dev);
 548                 return IRQ_HANDLED;
 549         }
 550
 551         if (ci->is_otg) {
 552                 otgsc = hw_read_otgsc(ci, ~0);
 553                 if (ci_otg_is_fsm_mode(ci)) {
 554                         ret = ci_otg_fsm_irq(ci);
 555                         if (ret == IRQ_HANDLED)
 556                                 return ret;
 557                 }
 558         }
 559
 560         /*
 561          * Handle id change interrupt, it indicates device/host function
 562          * switch.
 563          */
 564         if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
 565                 ci->id_event = true;
 566                 /* Clear ID change irq status */
 567                 hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
 568                 ci_otg_queue_work(ci);
 569                 return IRQ_HANDLED;
 570         }
 571
 572         /*
 573          * Handle vbus change interrupt, it indicates device connection
 574          * and disconnection events.
 575          */
 576         if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
 577                 ci->b_sess_valid_event = true;
 578                 /* Clear BSV irq */
 579                 hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
 580                 ci_otg_queue_work(ci);
 581                 return IRQ_HANDLED;
 582         }
 583
 584         /* Handle device/host interrupt */
 585         if (ci->role != CI_ROLE_END)
 586                 ret = ci_role(ci)->irq(ci);
 587
 588         return ret;
 589 }
 590
 591 static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
 592                              void *ptr)
 593 {
 594         struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb);
 595         struct ci_hdrc *ci = cbl->ci;
 596
 597         cbl->connected = event;
 598         cbl->changed = true;
 599
 600         ci_irq(ci->irq, ci);
 601         return NOTIFY_DONE;
 602 }
 603
 604 static int ci_get_platdata(struct device *dev,
 605                 struct ci_hdrc_platform_data *platdata)
 606 {
 607         struct extcon_dev *ext_vbus, *ext_id;
 608         struct ci_hdrc_cable *cable;
 609         int ret;
 610
 611         if (!platdata->phy_mode)
 612                 platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
 613
 614         if (!platdata->dr_mode)
 615                 platdata->dr_mode = usb_get_dr_mode(dev);
 616
 617         if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
 618                 platdata->dr_mode = USB_DR_MODE_OTG;
 619
 620         if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
 621                 /* Get the vbus regulator */
 622                 platdata->reg_vbus = devm_regulator_get(dev, "vbus");
 623                 if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
 624                         return -EPROBE_DEFER;
 625                 } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
 626                         /* no vbus regulator is needed */
 627                         platdata->reg_vbus = NULL;
 628                 } else if (IS_ERR(platdata->reg_vbus)) {
 629                         dev_err(dev, "Getting regulator error: %ld\n",
 630                                 PTR_ERR(platdata->reg_vbus));
 631                         return PTR_ERR(platdata->reg_vbus);
 632                 }
 633                 /* Get TPL support */
 634                 if (!platdata->tpl_support)
 635                         platdata->tpl_support =
 636                                 of_usb_host_tpl_support(dev->of_node);
 637         }
 638
 639         if (platdata->dr_mode == USB_DR_MODE_OTG) {
 640                 /* We can support HNP and SRP of OTG 2.0 */
 641                 platdata->ci_otg_caps.otg_rev = 0x0200;
 642                 platdata->ci_otg_caps.hnp_support = true;
 643                 platdata->ci_otg_caps.srp_support = true;
 644
 645                 /* Update otg capabilities by DT properties */
 646                 ret = of_usb_update_otg_caps(dev->of_node,
 647                                         &platdata->ci_otg_caps);
 648                 if (ret)
 649                         return ret;
 650         }
 651
 652         if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
 653                 platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
 654
 655         of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
 656                                      &platdata->phy_clkgate_delay_us);
 657
 658         platdata->itc_setting = 1;
 659
 660         of_property_read_u32(dev->of_node, "itc-setting",
 661                                         &platdata->itc_setting);
 662
 663         ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
 664                                 &platdata->ahb_burst_config);
 665         if (!ret) {
 666                 platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
 667         } else if (ret != -EINVAL) {
 668                 dev_err(dev, "failed to get ahb-burst-config\n");
 669                 return ret;
 670         }
 671
 672         ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
 673                                 &platdata->tx_burst_size);
 674         if (!ret) {
 675                 platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
 676         } else if (ret != -EINVAL) {
 677                 dev_err(dev, "failed to get tx-burst-size-dword\n");
 678                 return ret;
 679         }
 680
 681         ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
 682                                 &platdata->rx_burst_size);
 683         if (!ret) {
 684                 platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
 685         } else if (ret != -EINVAL) {
 686                 dev_err(dev, "failed to get rx-burst-size-dword\n");
 687                 return ret;
 688         }
 689
 690         if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
 691                 platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
 692
 693         ext_id = ERR_PTR(-ENODEV);
 694         ext_vbus = ERR_PTR(-ENODEV);
 695         if (of_property_read_bool(dev->of_node, "extcon")) {
 696                 /* Each one of them is not mandatory */
 697                 ext_vbus = extcon_get_edev_by_phandle(dev, 0);
 698                 if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
 699                         return PTR_ERR(ext_vbus);
 700
 701                 ext_id = extcon_get_edev_by_phandle(dev, 1);
 702                 if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
 703                         return PTR_ERR(ext_id);
 704         }
 705
 706         cable = &platdata->vbus_extcon;
 707         cable->nb.notifier_call = ci_cable_notifier;
 708         cable->edev = ext_vbus;
 709
 710         if (!IS_ERR(ext_vbus)) {
 711                 ret = extcon_get_state(cable->edev, EXTCON_USB);
 712                 if (ret)
 713                         cable->connected = true;
 714                 else
 715                         cable->connected = false;
 716         }
 717
 718         cable = &platdata->id_extcon;
 719         cable->nb.notifier_call = ci_cable_notifier;
 720         cable->edev = ext_id;
 721
 722         if (!IS_ERR(ext_id)) {
 723                 ret = extcon_get_state(cable->edev, EXTCON_USB_HOST);
 724                 if (ret)
 725                         cable->connected = true;
 726                 else
 727                         cable->connected = false;
 728         }
 729         return 0;
 730 }
 731
 732 static int ci_extcon_register(struct ci_hdrc *ci)
 733 {
 734         struct ci_hdrc_cable *id, *vbus;
 735         int ret;
 736
 737         id = &ci->platdata->id_extcon;
 738         id->ci = ci;
 739         if (!IS_ERR_OR_NULL(id->edev)) {
 740                 ret = devm_extcon_register_notifier(ci->dev, id->edev,
 741                                                 EXTCON_USB_HOST, &id->nb);
 742                 if (ret < 0) {
 743                         dev_err(ci->dev, "register ID failed\n");
 744                         return ret;
 745                 }
 746         }
 747
 748         vbus = &ci->platdata->vbus_extcon;
 749         vbus->ci = ci;
 750         if (!IS_ERR_OR_NULL(vbus->edev)) {
 751                 ret = devm_extcon_register_notifier(ci->dev, vbus->edev,
 752                                                 EXTCON_USB, &vbus->nb);
 753                 if (ret < 0) {
 754                         dev_err(ci->dev, "register VBUS failed\n");
 755                         return ret;
 756                 }
 757         }
 758
 759         return 0;
 760 }
 761
 762 static DEFINE_IDA(ci_ida);
 763
 764 struct platform_device *ci_hdrc_add_device(struct device *dev,
 765                         struct resource *res, int nres,
 766                         struct ci_hdrc_platform_data *platdata)
 767 {
 768         struct platform_device *pdev;
 769         int id, ret;
 770
 771         ret = ci_get_platdata(dev, platdata);
 772         if (ret)
 773                 return ERR_PTR(ret);
 774
 775         id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
 776         if (id < 0)
 777                 return ERR_PTR(id);
 778
 779         pdev = platform_device_alloc("ci_hdrc", id);
 780         if (!pdev) {
 781                 ret = -ENOMEM;
 782                 goto put_id;
 783         }
 784
 785         pdev->dev.parent = dev;
 786
 787         ret = platform_device_add_resources(pdev, res, nres);
 788         if (ret)
 789                 goto err;
 790
 791         ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
 792         if (ret)
 793                 goto err;
 794
 795         ret = platform_device_add(pdev);
 796         if (ret)
 797                 goto err;
 798
 799         return pdev;
 800
 801 err:
 802         platform_device_put(pdev);
 803 put_id:
 804         ida_simple_remove(&ci_ida, id);
 805         return ERR_PTR(ret);
 806 }
 807 EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
 808
 809 void ci_hdrc_remove_device(struct platform_device *pdev)
 810 {
 811         int id = pdev->id;
 812         platform_device_unregister(pdev);
 813         ida_simple_remove(&ci_ida, id);
 814 }
 815 EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
 816
 817 static inline void ci_role_destroy(struct ci_hdrc *ci)
 818 {
 819         ci_hdrc_gadget_destroy(ci);
 820         ci_hdrc_host_destroy(ci);
 821         if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
 822                 ci_hdrc_otg_destroy(ci);
 823 }
 824
 825 static void ci_get_otg_capable(struct ci_hdrc *ci)
 826 {
 827         if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
 828                 ci->is_otg = false;
 829         else
 830                 ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
 831                                 DCCPARAMS_DC | DCCPARAMS_HC)
 832                                         == (DCCPARAMS_DC | DCCPARAMS_HC));
 833         if (ci->is_otg) {
 834                 dev_dbg(ci->dev, "It is OTG capable controller\n");
 835                 /* Disable and clear all OTG irq */
 836                 hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
 837                                                         OTGSC_INT_STATUS_BITS);
 838         }
 839 }
 840
 841 static ssize_t ci_role_show(struct device *dev, struct device_attribute *attr,
 842                           char *buf)
 843 {
 844         struct ci_hdrc *ci = dev_get_drvdata(dev);
 845
 846         if (ci->role != CI_ROLE_END)
 847                 return sprintf(buf, "%s\n", ci_role(ci)->name);
 848
 849         return 0;
 850 }
 851
 852 static ssize_t ci_role_store(struct device *dev,
 853                 struct device_attribute *attr, const char *buf, size_t n)
 854 {
 855         struct ci_hdrc *ci = dev_get_drvdata(dev);
 856         enum ci_role role;
 857         int ret;
 858
 859         if (!(ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])) {
 860                 dev_warn(dev, "Current configuration is not dual-role, quit\n");
 861                 return -EPERM;
 862         }
 863
 864         for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++)
 865                 if (!strncmp(buf, ci->roles[role]->name,
 866                              strlen(ci->roles[role]->name)))
 867                         break;
 868
 869         if (role == CI_ROLE_END || role == ci->role)
 870                 return -EINVAL;
 871
 872         pm_runtime_get_sync(dev);
 873         disable_irq(ci->irq);
 874         ci_role_stop(ci);
 875         ret = ci_role_start(ci, role);
 876         if (!ret && ci->role == CI_ROLE_GADGET)
 877                 ci_handle_vbus_change(ci);
 878         enable_irq(ci->irq);
 879         pm_runtime_put_sync(dev);
 880
 881         return (ret == 0) ? n : ret;
 882 }
 883 static DEVICE_ATTR(role, 0644, ci_role_show, ci_role_store);
 884
 885 static struct attribute *ci_attrs[] = {
 886         &dev_attr_role.attr,
 887         NULL,
 888 };
 889
 890 static const struct attribute_group ci_attr_group = {
 891         .attrs = ci_attrs,
 892 };
 893
 894 static int ci_hdrc_probe(struct platform_device *pdev)
 895 {
 896         struct device   *dev = &pdev->dev;
 897         struct ci_hdrc  *ci;
 898         struct resource *res;
 899         void __iomem    *base;
 900         int             ret;
 901         enum usb_dr_mode dr_mode;
 902
 903         if (!dev_get_platdata(dev)) {
 904                 dev_err(dev, "platform data missing\n");
 905                 return -ENODEV;
 906         }
 907
 908         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 909         base = devm_ioremap_resource(dev, res);
 910         if (IS_ERR(base))
 911                 return PTR_ERR(base);
 912
 913         ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
 914         if (!ci)
 915                 return -ENOMEM;
 916
 917         spin_lock_init(&ci->lock);
 918         ci->dev = dev;
 919         ci->platdata = dev_get_platdata(dev);
 920         ci->imx28_write_fix = !!(ci->platdata->flags &
 921                 CI_HDRC_IMX28_WRITE_FIX);
 922         ci->supports_runtime_pm = !!(ci->platdata->flags &
 923                 CI_HDRC_SUPPORTS_RUNTIME_PM);
 924         platform_set_drvdata(pdev, ci);
 925
 926         ret = hw_device_init(ci, base);
 927         if (ret < 0) {
 928                 dev_err(dev, "can't initialize hardware\n");
 929                 return -ENODEV;
 930         }
 931
 932         ret = ci_ulpi_init(ci);
 933         if (ret)
 934                 return ret;
 935
 936         if (ci->platdata->phy) {
 937                 ci->phy = ci->platdata->phy;
 938         } else if (ci->platdata->usb_phy) {
 939                 ci->usb_phy = ci->platdata->usb_phy;
 940         } else {
 941                 ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, "phys",
 942                                                           0);
 943                 ci->phy = devm_phy_get(dev->parent, "usb-phy");
 944
 945                 /* Fallback to grabbing any registered USB2 PHY */
 946                 if (IS_ERR(ci->usb_phy) &&
 947                     PTR_ERR(ci->usb_phy) != -EPROBE_DEFER)
 948                         ci->usb_phy = devm_usb_get_phy(dev->parent,
 949                                                        USB_PHY_TYPE_USB2);
 950
 951                 /* if both generic PHY and USB PHY layers aren't enabled */
 952                 if (PTR_ERR(ci->phy) == -ENOSYS &&
 953                                 PTR_ERR(ci->usb_phy) == -ENXIO) {
 954                         ret = -ENXIO;
 955                         goto ulpi_exit;
 956                 }
 957
 958                 if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) {
 959                         ret = -EPROBE_DEFER;
 960                         goto ulpi_exit;
 961                 }
 962
 963                 if (IS_ERR(ci->phy))
 964                         ci->phy = NULL;
 965                 else if (IS_ERR(ci->usb_phy))
 966                         ci->usb_phy = NULL;
 967         }
 968
 969         ret = ci_usb_phy_init(ci);
 970         if (ret) {
 971                 dev_err(dev, "unable to init phy: %d\n", ret);
 972                 return ret;
 973         }
 974
 975         ci->hw_bank.phys = res->start;
 976
 977         ci->irq = platform_get_irq(pdev, 0);
 978         if (ci->irq < 0) {
 979                 dev_err(dev, "missing IRQ\n");
 980                 ret = ci->irq;
 981                 goto deinit_phy;
 982         }
 983
 984         ci_get_otg_capable(ci);
 985
 986         dr_mode = ci->platdata->dr_mode;
 987         /* initialize role(s) before the interrupt is requested */
 988         if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
 989                 ret = ci_hdrc_host_init(ci);
 990                 if (ret) {
 991                         if (ret == -ENXIO)
 992                                 dev_info(dev, "doesn't support host\n");
 993                         else
 994                                 goto deinit_phy;
 995                 }
 996         }
 997
 998         if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
 999                 ret = ci_hdrc_gadget_init(ci);
1000                 if (ret) {
1001                         if (ret == -ENXIO)
1002                                 dev_info(dev, "doesn't support gadget\n");
1003                         else
1004                                 goto deinit_host;
1005                 }
1006         }
1007
1008         if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
1009                 dev_err(dev, "no supported roles\n");
1010                 ret = -ENODEV;
1011                 goto deinit_gadget;
1012         }
1013
1014         if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
1015                 ret = ci_hdrc_otg_init(ci);
1016                 if (ret) {
1017                         dev_err(dev, "init otg fails, ret = %d\n", ret);
1018                         goto deinit_gadget;
1019                 }
1020         }
1021
1022         if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
1023                 if (ci->is_otg) {
1024                         ci->role = ci_otg_role(ci);
1025                         /* Enable ID change irq */
1026                         hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
1027                 } else {
1028                         /*
1029                          * If the controller is not OTG capable, but support
1030                          * role switch, the defalt role is gadget, and the
1031                          * user can switch it through debugfs.
1032                          */
1033                         ci->role = CI_ROLE_GADGET;
1034                 }
1035         } else {
1036                 ci->role = ci->roles[CI_ROLE_HOST]
1037                         ? CI_ROLE_HOST
1038                         : CI_ROLE_GADGET;
1039         }
1040
1041         if (!ci_otg_is_fsm_mode(ci)) {
1042                 /* only update vbus status for peripheral */
1043                 if (ci->role == CI_ROLE_GADGET)
1044                         ci_handle_vbus_change(ci);
1045
1046                 ret = ci_role_start(ci, ci->role);
1047                 if (ret) {
1048                         dev_err(dev, "can't start %s role\n",
1049                                                 ci_role(ci)->name);
1050                         goto stop;
1051                 }
1052         }
1053
1054         ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
1055                         ci->platdata->name, ci);
1056         if (ret)
1057                 goto stop;
1058
1059         ret = ci_extcon_register(ci);
1060         if (ret)
1061                 goto stop;
1062
1063         if (ci->supports_runtime_pm) {
1064                 pm_runtime_set_active(&pdev->dev);
1065                 pm_runtime_enable(&pdev->dev);
1066                 pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
1067                 pm_runtime_mark_last_busy(ci->dev);
1068                 pm_runtime_use_autosuspend(&pdev->dev);
1069         }
1070
1071         if (ci_otg_is_fsm_mode(ci))
1072                 ci_hdrc_otg_fsm_start(ci);
1073
1074         device_set_wakeup_capable(&pdev->dev, true);
1075         ret = dbg_create_files(ci);
1076         if (ret)
1077                 goto stop;
1078
1079         ret = sysfs_create_group(&dev->kobj, &ci_attr_group);
1080         if (ret)
1081                 goto remove_debug;
1082
1083         return 0;
1084
1085 remove_debug:
1086         dbg_remove_files(ci);
1087 stop:
1088         if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
1089                 ci_hdrc_otg_destroy(ci);
1090 deinit_gadget:
1091         ci_hdrc_gadget_destroy(ci);
1092 deinit_host:
1093         ci_hdrc_host_destroy(ci);
1094 deinit_phy:
1095         ci_usb_phy_exit(ci);
1096 ulpi_exit:
1097         ci_ulpi_exit(ci);
1098
1099         return ret;
1100 }
1101
1102 static int ci_hdrc_remove(struct platform_device *pdev)
1103 {
1104         struct ci_hdrc *ci = platform_get_drvdata(pdev);
1105
1106         if (ci->supports_runtime_pm) {
1107                 pm_runtime_get_sync(&pdev->dev);
1108                 pm_runtime_disable(&pdev->dev);
1109                 pm_runtime_put_noidle(&pdev->dev);
1110         }
1111
1112         dbg_remove_files(ci);
1113         sysfs_remove_group(&ci->dev->kobj, &ci_attr_group);
1114         ci_role_destroy(ci);
1115         ci_hdrc_enter_lpm(ci, true);
1116         ci_usb_phy_exit(ci);
1117         ci_ulpi_exit(ci);
1118
1119         return 0;
1120 }
1121
1122 #ifdef CONFIG_PM
1123 /* Prepare wakeup by SRP before suspend */
1124 static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
1125 {
1126         if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1127                                 !hw_read_otgsc(ci, OTGSC_ID)) {
1128                 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
1129                                                                 PORTSC_PP);
1130                 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
1131                                                                 PORTSC_WKCN);
1132         }
1133 }
1134
1135 /* Handle SRP when wakeup by data pulse */
1136 static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
1137 {
1138         if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1139                 (ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
1140                 if (!hw_read_otgsc(ci, OTGSC_ID)) {
1141                         ci->fsm.a_srp_det = 1;
1142                         ci->fsm.a_bus_drop = 0;
1143                 } else {
1144                         ci->fsm.id = 1;
1145                 }
1146                 ci_otg_queue_work(ci);
1147         }
1148 }
1149
1150 static void ci_controller_suspend(struct ci_hdrc *ci)
1151 {
1152         disable_irq(ci->irq);
1153         ci_hdrc_enter_lpm(ci, true);
1154         if (ci->platdata->phy_clkgate_delay_us)
1155                 usleep_range(ci->platdata->phy_clkgate_delay_us,
1156                              ci->platdata->phy_clkgate_delay_us + 50);
1157         usb_phy_set_suspend(ci->usb_phy, 1);
1158         ci->in_lpm = true;
1159         enable_irq(ci->irq);
1160 }
1161
1162 /*
1163  * Handle the wakeup interrupt triggered by extcon connector
1164  * We need to call ci_irq again for extcon since the first
1165  * interrupt (wakeup int) only let the controller be out of
1166  * low power mode, but not handle any interrupts.
1167  */
1168 static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
1169 {
1170         struct ci_hdrc_cable *cable_id, *cable_vbus;
1171         u32 otgsc = hw_read_otgsc(ci, ~0);
1172
1173         cable_id = &ci->platdata->id_extcon;
1174         cable_vbus = &ci->platdata->vbus_extcon;
1175
1176         if (!IS_ERR(cable_id->edev) && ci->is_otg &&
1177                 (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
1178                 ci_irq(ci->irq, ci);
1179
1180         if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
1181                 (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
1182                 ci_irq(ci->irq, ci);
1183 }
1184
1185 static int ci_controller_resume(struct device *dev)
1186 {
1187         struct ci_hdrc *ci = dev_get_drvdata(dev);
1188         int ret;
1189
1190         dev_dbg(dev, "at %s\n", __func__);
1191
1192         if (!ci->in_lpm) {
1193                 WARN_ON(1);
1194                 return 0;
1195         }
1196
1197         ci_hdrc_enter_lpm(ci, false);
1198
1199         ret = ci_ulpi_resume(ci);
1200         if (ret)
1201                 return ret;
1202
1203         if (ci->usb_phy) {
1204                 usb_phy_set_suspend(ci->usb_phy, 0);
1205                 usb_phy_set_wakeup(ci->usb_phy, false);
1206                 hw_wait_phy_stable();
1207         }
1208
1209         ci->in_lpm = false;
1210         if (ci->wakeup_int) {
1211                 ci->wakeup_int = false;
1212                 pm_runtime_mark_last_busy(ci->dev);
1213                 pm_runtime_put_autosuspend(ci->dev);
1214                 enable_irq(ci->irq);
1215                 if (ci_otg_is_fsm_mode(ci))
1216                         ci_otg_fsm_wakeup_by_srp(ci);
1217                 ci_extcon_wakeup_int(ci);
1218         }
1219
1220         return 0;
1221 }
1222
1223 #ifdef CONFIG_PM_SLEEP
1224 static int ci_suspend(struct device *dev)
1225 {
1226         struct ci_hdrc *ci = dev_get_drvdata(dev);
1227
1228         if (ci->wq)
1229                 flush_workqueue(ci->wq);
1230         /*
1231          * Controller needs to be active during suspend, otherwise the core
1232          * may run resume when the parent is at suspend if other driver's
1233          * suspend fails, it occurs before parent's suspend has not started,
1234          * but the core suspend has finished.
1235          */
1236         if (ci->in_lpm)
1237                 pm_runtime_resume(dev);
1238
1239         if (ci->in_lpm) {
1240                 WARN_ON(1);
1241                 return 0;
1242         }
1243
1244         if (device_may_wakeup(dev)) {
1245                 if (ci_otg_is_fsm_mode(ci))
1246                         ci_otg_fsm_suspend_for_srp(ci);
1247
1248                 usb_phy_set_wakeup(ci->usb_phy, true);
1249                 enable_irq_wake(ci->irq);
1250         }
1251
1252         ci_controller_suspend(ci);
1253
1254         return 0;
1255 }
1256
1257 static int ci_resume(struct device *dev)
1258 {
1259         struct ci_hdrc *ci = dev_get_drvdata(dev);
1260         int ret;
1261
1262         if (device_may_wakeup(dev))
1263                 disable_irq_wake(ci->irq);
1264
1265         ret = ci_controller_resume(dev);
1266         if (ret)
1267                 return ret;
1268
1269         if (ci->supports_runtime_pm) {
1270                 pm_runtime_disable(dev);
1271                 pm_runtime_set_active(dev);
1272                 pm_runtime_enable(dev);
1273         }
1274
1275         return ret;
1276 }
1277 #endif /* CONFIG_PM_SLEEP */
1278
1279 static int ci_runtime_suspend(struct device *dev)
1280 {
1281         struct ci_hdrc *ci = dev_get_drvdata(dev);
1282
1283         dev_dbg(dev, "at %s\n", __func__);
1284
1285         if (ci->in_lpm) {
1286                 WARN_ON(1);
1287                 return 0;
1288         }
1289
1290         if (ci_otg_is_fsm_mode(ci))
1291                 ci_otg_fsm_suspend_for_srp(ci);
1292
1293         usb_phy_set_wakeup(ci->usb_phy, true);
1294         ci_controller_suspend(ci);
1295
1296         return 0;
1297 }
1298
1299 static int ci_runtime_resume(struct device *dev)
1300 {
1301         return ci_controller_resume(dev);
1302 }
1303
1304 #endif /* CONFIG_PM */
1305 static const struct dev_pm_ops ci_pm_ops = {
1306         SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
1307         SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
1308 };
1309
1310 static struct platform_driver ci_hdrc_driver = {
1311         .probe  = ci_hdrc_probe,
1312         .remove = ci_hdrc_remove,
1313         .driver = {
1314                 .name   = "ci_hdrc",
1315                 .pm     = &ci_pm_ops,
1316         },
1317 };
1318
1319 static int __init ci_hdrc_platform_register(void)
1320 {
1321         ci_hdrc_host_driver_init();
1322         return platform_driver_register(&ci_hdrc_driver);
1323 }
1324 module_init(ci_hdrc_platform_register);
1325
1326 static void __exit ci_hdrc_platform_unregister(void)
1327 {
1328         platform_driver_unregister(&ci_hdrc_driver);
1329 }
1330 module_exit(ci_hdrc_platform_unregister);
1331
1332 MODULE_ALIAS("platform:ci_hdrc");
1333 MODULE_LICENSE("GPL v2");
1334 MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
1335 MODULE_DESCRIPTION("ChipIdea HDRC Driver");