drivers/usb/atm/ueagle-atm.c

   1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
   2 /*-
   3  * Copyright (c) 2003, 2004
   4  *      Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
   5  *
   6  * Copyright (c) 2005-2007 Matthieu Castet <castet.matthieu@free.fr>
   7  * Copyright (c) 2005-2007 Stanislaw Gruszka <stf_xl@wp.pl>
   8  *
   9  * This software is available to you under a choice of one of two
  10  * licenses. You may choose to be licensed under the terms of the GNU
  11  * General Public License (GPL) Version 2, available from the file
  12  * COPYING in the main directory of this source tree, or the
  13  * BSD license below:
  14  *
  15  * Redistribution and use in source and binary forms, with or without
  16  * modification, are permitted provided that the following conditions
  17  * are met:
  18  * 1. Redistributions of source code must retain the above copyright
  19  *    notice unmodified, this list of conditions, and the following
  20  *    disclaimer.
  21  * 2. Redistributions in binary form must reproduce the above copyright
  22  *    notice, this list of conditions and the following disclaimer in the
  23  *    documentation and/or other materials provided with the distribution.
  24  *
  25  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  26  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  27  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  28  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  29  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  30  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  31  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  32  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  33  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  34  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  35  * SUCH DAMAGE.
  36  *
  37  * GPL license :
  38  * This program is free software; you can redistribute it and/or
  39  * modify it under the terms of the GNU General Public License
  40  * as published by the Free Software Foundation; either version 2
  41  * of the License, or (at your option) any later version.
  42  *
  43  * This program is distributed in the hope that it will be useful,
  44  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  45  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  46  * GNU General Public License for more details.
  47  *
  48  * You should have received a copy of the GNU General Public License
  49  * along with this program; if not, write to the Free Software
  50  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  51  *
  52  *
  53  * HISTORY : some part of the code was base on ueagle 1.3 BSD driver,
  54  * Damien Bergamini agree to put his code under a DUAL GPL/BSD license.
  55  *
  56  * The rest of the code was was rewritten from scratch.
  57  */
  58
  59 #include <linux/module.h>
  60 #include <linux/moduleparam.h>
  61 #include <linux/crc32.h>
  62 #include <linux/usb.h>
  63 #include <linux/firmware.h>
  64 #include <linux/ctype.h>
  65 #include <linux/sched.h>
  66 #include <linux/kthread.h>
  67 #include <linux/mutex.h>
  68 #include <linux/freezer.h>
  69 #include <linux/slab.h>
  70 #include <linux/kernel.h>
  71
  72 #include <asm/unaligned.h>
  73
  74 #include "usbatm.h"
  75
  76 #define EAGLEUSBVERSION "ueagle 1.4"
  77
  78
  79 /*
  80  * Debug macros
  81  */
  82 #define uea_dbg(usb_dev, format, args...)       \
  83         do { \
  84                 if (debug >= 1) \
  85                         dev_dbg(&(usb_dev)->dev, \
  86                                 "[ueagle-atm dbg] %s: " format, \
  87                                         __func__, ##args); \
  88         } while (0)
  89
  90 #define uea_vdbg(usb_dev, format, args...)      \
  91         do { \
  92                 if (debug >= 2) \
  93                         dev_dbg(&(usb_dev)->dev, \
  94                                 "[ueagle-atm vdbg]  " format, ##args); \
  95         } while (0)
  96
  97 #define uea_enters(usb_dev) \
  98         uea_vdbg(usb_dev, "entering %s\n" , __func__)
  99
 100 #define uea_leaves(usb_dev) \
 101         uea_vdbg(usb_dev, "leaving  %s\n" , __func__)
 102
 103 #define uea_err(usb_dev, format, args...) \
 104         dev_err(&(usb_dev)->dev , "[UEAGLE-ATM] " format , ##args)
 105
 106 #define uea_warn(usb_dev, format, args...) \
 107         dev_warn(&(usb_dev)->dev , "[Ueagle-atm] " format, ##args)
 108
 109 #define uea_info(usb_dev, format, args...) \
 110         dev_info(&(usb_dev)->dev , "[ueagle-atm] " format, ##args)
 111
 112 struct intr_pkt;
 113
 114 /* cmv's from firmware */
 115 struct uea_cmvs_v1 {
 116         u32 address;
 117         u16 offset;
 118         u32 data;
 119 } __packed;
 120
 121 struct uea_cmvs_v2 {
 122         u32 group;
 123         u32 address;
 124         u32 offset;
 125         u32 data;
 126 } __packed;
 127
 128 /* information about currently processed cmv */
 129 struct cmv_dsc_e1 {
 130         u8 function;
 131         u16 idx;
 132         u32 address;
 133         u16 offset;
 134 };
 135
 136 struct cmv_dsc_e4 {
 137         u16 function;
 138         u16 offset;
 139         u16 address;
 140         u16 group;
 141 };
 142
 143 union cmv_dsc {
 144         struct cmv_dsc_e1 e1;
 145         struct cmv_dsc_e4 e4;
 146 };
 147
 148 struct uea_softc {
 149         struct usb_device *usb_dev;
 150         struct usbatm_data *usbatm;
 151
 152         int modem_index;
 153         unsigned int driver_info;
 154         int annex;
 155 #define ANNEXA 0
 156 #define ANNEXB 1
 157
 158         int booting;
 159         int reset;
 160
 161         wait_queue_head_t sync_q;
 162
 163         struct task_struct *kthread;
 164         u32 data;
 165         u32 data1;
 166
 167         int cmv_ack;
 168         union cmv_dsc cmv_dsc;
 169
 170         struct work_struct task;
 171         u16 pageno;
 172         u16 ovl;
 173
 174         const struct firmware *dsp_firm;
 175         struct urb *urb_int;
 176
 177         void (*dispatch_cmv)(struct uea_softc *, struct intr_pkt *);
 178         void (*schedule_load_page)(struct uea_softc *, struct intr_pkt *);
 179         int (*stat)(struct uea_softc *);
 180         int (*send_cmvs)(struct uea_softc *);
 181
 182         /* keep in sync with eaglectl */
 183         struct uea_stats {
 184                 struct {
 185                         u32 state;
 186                         u32 flags;
 187                         u32 mflags;
 188                         u32 vidcpe;
 189                         u32 vidco;
 190                         u32 dsrate;
 191                         u32 usrate;
 192                         u32 dsunc;
 193                         u32 usunc;
 194                         u32 dscorr;
 195                         u32 uscorr;
 196                         u32 txflow;
 197                         u32 rxflow;
 198                         u32 usattenuation;
 199                         u32 dsattenuation;
 200                         u32 dsmargin;
 201                         u32 usmargin;
 202                         u32 firmid;
 203                 } phy;
 204         } stats;
 205 };
 206
 207 /*
 208  * Elsa IDs
 209  */
 210 #define ELSA_VID                0x05CC
 211 #define ELSA_PID_PSTFIRM        0x3350
 212 #define ELSA_PID_PREFIRM        0x3351
 213
 214 #define ELSA_PID_A_PREFIRM      0x3352
 215 #define ELSA_PID_A_PSTFIRM      0x3353
 216 #define ELSA_PID_B_PREFIRM      0x3362
 217 #define ELSA_PID_B_PSTFIRM      0x3363
 218
 219 /*
 220  * Devolo IDs : pots if (pid & 0x10)
 221  */
 222 #define DEVOLO_VID                      0x1039
 223 #define DEVOLO_EAGLE_I_A_PID_PSTFIRM    0x2110
 224 #define DEVOLO_EAGLE_I_A_PID_PREFIRM    0x2111
 225
 226 #define DEVOLO_EAGLE_I_B_PID_PSTFIRM    0x2100
 227 #define DEVOLO_EAGLE_I_B_PID_PREFIRM    0x2101
 228
 229 #define DEVOLO_EAGLE_II_A_PID_PSTFIRM   0x2130
 230 #define DEVOLO_EAGLE_II_A_PID_PREFIRM   0x2131
 231
 232 #define DEVOLO_EAGLE_II_B_PID_PSTFIRM   0x2120
 233 #define DEVOLO_EAGLE_II_B_PID_PREFIRM   0x2121
 234
 235 /*
 236  * Reference design USB IDs
 237  */
 238 #define ANALOG_VID              0x1110
 239 #define ADI930_PID_PREFIRM      0x9001
 240 #define ADI930_PID_PSTFIRM      0x9000
 241
 242 #define EAGLE_I_PID_PREFIRM     0x9010  /* Eagle I */
 243 #define EAGLE_I_PID_PSTFIRM     0x900F  /* Eagle I */
 244
 245 #define EAGLE_IIC_PID_PREFIRM   0x9024  /* Eagle IIC */
 246 #define EAGLE_IIC_PID_PSTFIRM   0x9023  /* Eagle IIC */
 247
 248 #define EAGLE_II_PID_PREFIRM    0x9022  /* Eagle II */
 249 #define EAGLE_II_PID_PSTFIRM    0x9021  /* Eagle II */
 250
 251 #define EAGLE_III_PID_PREFIRM   0x9032  /* Eagle III */
 252 #define EAGLE_III_PID_PSTFIRM   0x9031  /* Eagle III */
 253
 254 #define EAGLE_IV_PID_PREFIRM    0x9042  /* Eagle IV */
 255 #define EAGLE_IV_PID_PSTFIRM    0x9041  /* Eagle IV */
 256
 257 /*
 258  * USR USB IDs
 259  */
 260 #define USR_VID                 0x0BAF
 261 #define MILLER_A_PID_PREFIRM    0x00F2
 262 #define MILLER_A_PID_PSTFIRM    0x00F1
 263 #define MILLER_B_PID_PREFIRM    0x00FA
 264 #define MILLER_B_PID_PSTFIRM    0x00F9
 265 #define HEINEKEN_A_PID_PREFIRM  0x00F6
 266 #define HEINEKEN_A_PID_PSTFIRM  0x00F5
 267 #define HEINEKEN_B_PID_PREFIRM  0x00F8
 268 #define HEINEKEN_B_PID_PSTFIRM  0x00F7
 269
 270 #define PREFIRM 0
 271 #define PSTFIRM (1<<7)
 272 #define AUTO_ANNEX_A (1<<8)
 273 #define AUTO_ANNEX_B (1<<9)
 274
 275 enum {
 276         ADI930 = 0,
 277         EAGLE_I,
 278         EAGLE_II,
 279         EAGLE_III,
 280         EAGLE_IV
 281 };
 282
 283 /* macros for both struct usb_device_id and struct uea_softc */
 284 #define UEA_IS_PREFIRM(x) \
 285         (!((x)->driver_info & PSTFIRM))
 286 #define UEA_CHIP_VERSION(x) \
 287         ((x)->driver_info & 0xf)
 288
 289 #define IS_ISDN(x) \
 290         ((x)->annex & ANNEXB)
 291
 292 #define INS_TO_USBDEV(ins) (ins->usb_dev)
 293
 294 #define GET_STATUS(data) \
 295         ((data >> 8) & 0xf)
 296
 297 #define IS_OPERATIONAL(sc) \
 298         ((UEA_CHIP_VERSION(sc) != EAGLE_IV) ? \
 299         (GET_STATUS(sc->stats.phy.state) == 2) : \
 300         (sc->stats.phy.state == 7))
 301
 302 /*
 303  * Set of macros to handle unaligned data in the firmware blob.
 304  * The FW_GET_BYTE() macro is provided only for consistency.
 305  */
 306
 307 #define FW_GET_BYTE(p) (*((__u8 *) (p)))
 308
 309 #define FW_DIR "/*(DEBLOBBED)*/"
 310 #define EAGLE_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 311 #define ADI930_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 312 #define EAGLE_I_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 313 #define EAGLE_II_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 314 #define EAGLE_III_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 315 #define EAGLE_IV_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 316
 317 #define DSP4I_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 318 #define DSP4P_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 319 #define DSP9I_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 320 #define DSP9P_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 321 #define DSPEI_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 322 #define DSPEP_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 323 #define FPGA930_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 324
 325 #define CMV4P_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 326 #define CMV4PV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 327 #define CMV4I_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 328 #define CMV4IV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 329 #define CMV9P_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 330 #define CMV9PV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 331 #define CMV9I_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 332 #define CMV9IV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 333 #define CMVEP_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 334 #define CMVEPV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 335 #define CMVEI_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 336 #define CMVEIV2_FIRMWARE FW_DIR "/*(DEBLOBBED)*/"
 337
 338 #define UEA_FW_NAME_MAX 30
 339 #define NB_MODEM 4
 340
 341 #define BULK_TIMEOUT 300
 342 #define CTRL_TIMEOUT 1000
 343
 344 #define ACK_TIMEOUT msecs_to_jiffies(3000)
 345
 346 #define UEA_INTR_IFACE_NO       0
 347 #define UEA_US_IFACE_NO         1
 348 #define UEA_DS_IFACE_NO         2
 349
 350 #define FASTEST_ISO_INTF        8
 351
 352 #define UEA_BULK_DATA_PIPE      0x02
 353 #define UEA_IDMA_PIPE           0x04
 354 #define UEA_INTR_PIPE           0x04
 355 #define UEA_ISO_DATA_PIPE       0x08
 356
 357 #define UEA_E1_SET_BLOCK        0x0001
 358 #define UEA_E4_SET_BLOCK        0x002c
 359 #define UEA_SET_MODE            0x0003
 360 #define UEA_SET_2183_DATA       0x0004
 361 #define UEA_SET_TIMEOUT         0x0011
 362
 363 #define UEA_LOOPBACK_OFF        0x0002
 364 #define UEA_LOOPBACK_ON         0x0003
 365 #define UEA_BOOT_IDMA           0x0006
 366 #define UEA_START_RESET         0x0007
 367 #define UEA_END_RESET           0x0008
 368
 369 #define UEA_SWAP_MAILBOX        (0x3fcd | 0x4000)
 370 #define UEA_MPTX_START          (0x3fce | 0x4000)
 371 #define UEA_MPTX_MAILBOX        (0x3fd6 | 0x4000)
 372 #define UEA_MPRX_MAILBOX        (0x3fdf | 0x4000)
 373
 374 /* block information in eagle4 dsp firmware  */
 375 struct block_index {
 376         __le32 PageOffset;
 377         __le32 NotLastBlock;
 378         __le32 dummy;
 379         __le32 PageSize;
 380         __le32 PageAddress;
 381         __le16 dummy1;
 382         __le16 PageNumber;
 383 } __packed;
 384
 385 #define E4_IS_BOOT_PAGE(PageSize) ((le32_to_cpu(PageSize)) & 0x80000000)
 386 #define E4_PAGE_BYTES(PageSize) ((le32_to_cpu(PageSize) & 0x7fffffff) * 4)
 387
 388 #define E4_L1_STRING_HEADER 0x10
 389 #define E4_MAX_PAGE_NUMBER 0x58
 390 #define E4_NO_SWAPPAGE_HEADERS 0x31
 391
 392 /* l1_code is eagle4 dsp firmware format */
 393 struct l1_code {
 394         u8 string_header[E4_L1_STRING_HEADER];
 395         u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
 396         struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
 397         u8 code[0];
 398 } __packed;
 399
 400 /* structures describing a block within a DSP page */
 401 struct block_info_e1 {
 402         __le16 wHdr;
 403         __le16 wAddress;
 404         __le16 wSize;
 405         __le16 wOvlOffset;
 406         __le16 wOvl;            /* overlay */
 407         __le16 wLast;
 408 } __packed;
 409 #define E1_BLOCK_INFO_SIZE 12
 410
 411 struct block_info_e4 {
 412         __be16 wHdr;
 413         __u8 bBootPage;
 414         __u8 bPageNumber;
 415         __be32 dwSize;
 416         __be32 dwAddress;
 417         __be16 wReserved;
 418 } __packed;
 419 #define E4_BLOCK_INFO_SIZE 14
 420
 421 #define UEA_BIHDR 0xabcd
 422 #define UEA_RESERVED 0xffff
 423
 424 /* constants describing cmv type */
 425 #define E1_PREAMBLE 0x535c
 426 #define E1_MODEMTOHOST 0x01
 427 #define E1_HOSTTOMODEM 0x10
 428
 429 #define E1_MEMACCESS 0x1
 430 #define E1_ADSLDIRECTIVE 0x7
 431 #define E1_FUNCTION_TYPE(f) ((f) >> 4)
 432 #define E1_FUNCTION_SUBTYPE(f) ((f) & 0x0f)
 433
 434 #define E4_MEMACCESS 0
 435 #define E4_ADSLDIRECTIVE 0xf
 436 #define E4_FUNCTION_TYPE(f) ((f) >> 8)
 437 #define E4_FUNCTION_SIZE(f) ((f) & 0x0f)
 438 #define E4_FUNCTION_SUBTYPE(f) (((f) >> 4) & 0x0f)
 439
 440 /* for MEMACCESS */
 441 #define E1_REQUESTREAD  0x0
 442 #define E1_REQUESTWRITE 0x1
 443 #define E1_REPLYREAD    0x2
 444 #define E1_REPLYWRITE   0x3
 445
 446 #define E4_REQUESTREAD  0x0
 447 #define E4_REQUESTWRITE 0x4
 448 #define E4_REPLYREAD    (E4_REQUESTREAD | 1)
 449 #define E4_REPLYWRITE   (E4_REQUESTWRITE | 1)
 450
 451 /* for ADSLDIRECTIVE */
 452 #define E1_KERNELREADY 0x0
 453 #define E1_MODEMREADY  0x1
 454
 455 #define E4_KERNELREADY 0x0
 456 #define E4_MODEMREADY  0x1
 457
 458 #define E1_MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
 459 #define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | \
 460         ((st) & 0xf) << 4 | ((s) & 0xf))
 461
 462 #define E1_MAKESA(a, b, c, d)                                           \
 463         (((c) & 0xff) << 24 |                                           \
 464          ((d) & 0xff) << 16 |                                           \
 465          ((a) & 0xff) << 8  |                                           \
 466          ((b) & 0xff))
 467
 468 #define E1_GETSA1(a) ((a >> 8) & 0xff)
 469 #define E1_GETSA2(a) (a & 0xff)
 470 #define E1_GETSA3(a) ((a >> 24) & 0xff)
 471 #define E1_GETSA4(a) ((a >> 16) & 0xff)
 472
 473 #define E1_SA_CNTL E1_MAKESA('C', 'N', 'T', 'L')
 474 #define E1_SA_DIAG E1_MAKESA('D', 'I', 'A', 'G')
 475 #define E1_SA_INFO E1_MAKESA('I', 'N', 'F', 'O')
 476 #define E1_SA_OPTN E1_MAKESA('O', 'P', 'T', 'N')
 477 #define E1_SA_RATE E1_MAKESA('R', 'A', 'T', 'E')
 478 #define E1_SA_STAT E1_MAKESA('S', 'T', 'A', 'T')
 479
 480 #define E4_SA_CNTL 1
 481 #define E4_SA_STAT 2
 482 #define E4_SA_INFO 3
 483 #define E4_SA_TEST 4
 484 #define E4_SA_OPTN 5
 485 #define E4_SA_RATE 6
 486 #define E4_SA_DIAG 7
 487 #define E4_SA_CNFG 8
 488
 489 /* structures representing a CMV (Configuration and Management Variable) */
 490 struct cmv_e1 {
 491         __le16 wPreamble;
 492         __u8 bDirection;
 493         __u8 bFunction;
 494         __le16 wIndex;
 495         __le32 dwSymbolicAddress;
 496         __le16 wOffsetAddress;
 497         __le32 dwData;
 498 } __packed;
 499
 500 struct cmv_e4 {
 501         __be16 wGroup;
 502         __be16 wFunction;
 503         __be16 wOffset;
 504         __be16 wAddress;
 505         __be32 dwData[6];
 506 } __packed;
 507
 508 /* structures representing swap information */
 509 struct swap_info_e1 {
 510         __u8 bSwapPageNo;
 511         __u8 bOvl;              /* overlay */
 512 } __packed;
 513
 514 struct swap_info_e4 {
 515         __u8 bSwapPageNo;
 516 } __packed;
 517
 518 /* structures representing interrupt data */
 519 #define e1_bSwapPageNo  u.e1.s1.swapinfo.bSwapPageNo
 520 #define e1_bOvl         u.e1.s1.swapinfo.bOvl
 521 #define e4_bSwapPageNo  u.e4.s1.swapinfo.bSwapPageNo
 522
 523 #define INT_LOADSWAPPAGE 0x0001
 524 #define INT_INCOMINGCMV  0x0002
 525
 526 union intr_data_e1 {
 527         struct {
 528                 struct swap_info_e1 swapinfo;
 529                 __le16 wDataSize;
 530         } __packed s1;
 531         struct {
 532                 struct cmv_e1 cmv;
 533                 __le16 wDataSize;
 534         } __packed s2;
 535 } __packed;
 536
 537 union intr_data_e4 {
 538         struct {
 539                 struct swap_info_e4 swapinfo;
 540                 __le16 wDataSize;
 541         } __packed s1;
 542         struct {
 543                 struct cmv_e4 cmv;
 544                 __le16 wDataSize;
 545         } __packed s2;
 546 } __packed;
 547
 548 struct intr_pkt {
 549         __u8 bType;
 550         __u8 bNotification;
 551         __le16 wValue;
 552         __le16 wIndex;
 553         __le16 wLength;
 554         __le16 wInterrupt;
 555         union {
 556                 union intr_data_e1 e1;
 557                 union intr_data_e4 e4;
 558         } u;
 559 } __packed;
 560
 561 #define E1_INTR_PKT_SIZE 28
 562 #define E4_INTR_PKT_SIZE 64
 563
 564 static struct usb_driver uea_driver;
 565 static DEFINE_MUTEX(uea_mutex);
 566 static const char * const chip_name[] = {
 567         "ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"};
 568
 569 static int modem_index;
 570 static unsigned int debug;
 571 static unsigned int altsetting[NB_MODEM] = {
 572                                 [0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
 573 static bool sync_wait[NB_MODEM];
 574 static char *cmv_file[NB_MODEM];
 575 static int annex[NB_MODEM];
 576
 577 module_param(debug, uint, 0644);
 578 MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
 579 module_param_array(altsetting, uint, NULL, 0644);
 580 MODULE_PARM_DESC(altsetting, "alternate setting for incoming traffic: 0=bulk, "
 581                              "1=isoc slowest, ... , 8=isoc fastest (default)");
 582 module_param_array(sync_wait, bool, NULL, 0644);
 583 MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
 584 module_param_array(cmv_file, charp, NULL, 0644);
 585 MODULE_PARM_DESC(cmv_file,
 586                 "file name with configuration and management variables");
 587 module_param_array(annex, uint, NULL, 0644);
 588 MODULE_PARM_DESC(annex,
 589                 "manually set annex a/b (0=auto, 1=annex a, 2=annex b)");
 590
 591 #define uea_wait(sc, cond, timeo) \
 592 ({ \
 593         int _r = wait_event_interruptible_timeout(sc->sync_q, \
 594                         (cond) || kthread_should_stop(), timeo); \
 595         if (kthread_should_stop()) \
 596                 _r = -ENODEV; \
 597         _r; \
 598 })
 599
 600 #define UPDATE_ATM_STAT(type, val) \
 601         do { \
 602                 if (sc->usbatm->atm_dev) \
 603                         sc->usbatm->atm_dev->type = val; \
 604         } while (0)
 605
 606 #define UPDATE_ATM_SIGNAL(val) \
 607         do { \
 608                 if (sc->usbatm->atm_dev) \
 609                         atm_dev_signal_change(sc->usbatm->atm_dev, val); \
 610         } while (0)
 611
 612
 613 /* Firmware loading */
 614 #define LOAD_INTERNAL     0xA0
 615 #define F8051_USBCS       0x7f92
 616
 617 /**
 618  * uea_send_modem_cmd - Send a command for pre-firmware devices.
 619  */
 620 static int uea_send_modem_cmd(struct usb_device *usb,
 621                               u16 addr, u16 size, const u8 *buff)
 622 {
 623         int ret = -ENOMEM;
 624         u8 *xfer_buff;
 625
 626         xfer_buff = kmemdup(buff, size, GFP_KERNEL);
 627         if (xfer_buff) {
 628                 ret = usb_control_msg(usb,
 629                                       usb_sndctrlpipe(usb, 0),
 630                                       LOAD_INTERNAL,
 631                                       USB_DIR_OUT | USB_TYPE_VENDOR |
 632                                       USB_RECIP_DEVICE, addr, 0, xfer_buff,
 633                                       size, CTRL_TIMEOUT);
 634                 kfree(xfer_buff);
 635         }
 636
 637         if (ret < 0)
 638                 return ret;
 639
 640         return (ret == size) ? 0 : -EIO;
 641 }
 642
 643 static void uea_upload_pre_firmware(const struct firmware *fw_entry,
 644                                                                 void *context)
 645 {
 646         struct usb_device *usb = context;
 647         const u8 *pfw;
 648         u8 value;
 649         u32 crc = 0;
 650         int ret, size;
 651
 652         uea_enters(usb);
 653         if (!fw_entry) {
 654                 uea_err(usb, "firmware is not available\n");
 655                 goto err;
 656         }
 657
 658         pfw = fw_entry->data;
 659         size = fw_entry->size;
 660         if (size < 4)
 661                 goto err_fw_corrupted;
 662
 663         crc = get_unaligned_le32(pfw);
 664         pfw += 4;
 665         size -= 4;
 666         if (crc32_be(0, pfw, size) != crc)
 667                 goto err_fw_corrupted;
 668
 669         /*
 670          * Start to upload firmware : send reset
 671          */
 672         value = 1;
 673         ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value);
 674
 675         if (ret < 0) {
 676                 uea_err(usb, "modem reset failed with error %d\n", ret);
 677                 goto err;
 678         }
 679
 680         while (size > 3) {
 681                 u8 len = FW_GET_BYTE(pfw);
 682                 u16 add = get_unaligned_le16(pfw + 1);
 683
 684                 size -= len + 3;
 685                 if (size < 0)
 686                         goto err_fw_corrupted;
 687
 688                 ret = uea_send_modem_cmd(usb, add, len, pfw + 3);
 689                 if (ret < 0) {
 690                         uea_err(usb, "uploading firmware data failed "
 691                                         "with error %d\n", ret);
 692                         goto err;
 693                 }
 694                 pfw += len + 3;
 695         }
 696
 697         if (size != 0)
 698                 goto err_fw_corrupted;
 699
 700         /*
 701          * Tell the modem we finish : de-assert reset
 702          */
 703         value = 0;
 704         ret = uea_send_modem_cmd(usb, F8051_USBCS, 1, &value);
 705         if (ret < 0)
 706                 uea_err(usb, "modem de-assert failed with error %d\n", ret);
 707         else
 708                 uea_info(usb, "firmware uploaded\n");
 709
 710         goto err;
 711
 712 err_fw_corrupted:
 713         uea_err(usb, "firmware is corrupted\n");
 714 err:
 715         release_firmware(fw_entry);
 716         uea_leaves(usb);
 717 }
 718
 719 /**
 720  * uea_load_firmware - Load usb firmware for pre-firmware devices.
 721  */
 722 static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
 723 {
 724         int ret;
 725         char *fw_name = EAGLE_FIRMWARE;
 726
 727         uea_enters(usb);
 728         uea_info(usb, "pre-firmware device, uploading firmware\n");
 729
 730         switch (ver) {
 731         case ADI930:
 732                 fw_name = ADI930_FIRMWARE;
 733                 break;
 734         case EAGLE_I:
 735                 fw_name = EAGLE_I_FIRMWARE;
 736                 break;
 737         case EAGLE_II:
 738                 fw_name = EAGLE_II_FIRMWARE;
 739                 break;
 740         case EAGLE_III:
 741                 fw_name = EAGLE_III_FIRMWARE;
 742                 break;
 743         case EAGLE_IV:
 744                 fw_name = EAGLE_IV_FIRMWARE;
 745                 break;
 746         }
 747
 748         ret = reject_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev,
 749                                         GFP_KERNEL, usb,
 750                                         uea_upload_pre_firmware);
 751         if (ret)
 752                 uea_err(usb, "firmware %s is not available\n", fw_name);
 753         else
 754                 uea_info(usb, "loading firmware %s\n", fw_name);
 755
 756         uea_leaves(usb);
 757         return ret;
 758 }
 759
 760 /* modem management : dsp firmware, send/read CMV, monitoring statistic
 761  */
 762
 763 /*
 764  * Make sure that the DSP code provided is safe to use.
 765  */
 766 static int check_dsp_e1(const u8 *dsp, unsigned int len)
 767 {
 768         u8 pagecount, blockcount;
 769         u16 blocksize;
 770         u32 pageoffset;
 771         unsigned int i, j, p, pp;
 772
 773         pagecount = FW_GET_BYTE(dsp);
 774         p = 1;
 775
 776         /* enough space for page offsets? */
 777         if (p + 4 * pagecount > len)
 778                 return 1;
 779
 780         for (i = 0; i < pagecount; i++) {
 781
 782                 pageoffset = get_unaligned_le32(dsp + p);
 783                 p += 4;
 784
 785                 if (pageoffset == 0)
 786                         continue;
 787
 788                 /* enough space for blockcount? */
 789                 if (pageoffset >= len)
 790                         return 1;
 791
 792                 pp = pageoffset;
 793                 blockcount = FW_GET_BYTE(dsp + pp);
 794                 pp += 1;
 795
 796                 for (j = 0; j < blockcount; j++) {
 797
 798                         /* enough space for block header? */
 799                         if (pp + 4 > len)
 800                                 return 1;
 801
 802                         pp += 2;        /* skip blockaddr */
 803                         blocksize = get_unaligned_le16(dsp + pp);
 804                         pp += 2;
 805
 806                         /* enough space for block data? */
 807                         if (pp + blocksize > len)
 808                                 return 1;
 809
 810                         pp += blocksize;
 811                 }
 812         }
 813
 814         return 0;
 815 }
 816
 817 static int check_dsp_e4(const u8 *dsp, int len)
 818 {
 819         int i;
 820         struct l1_code *p = (struct l1_code *) dsp;
 821         unsigned int sum = p->code - dsp;
 822
 823         if (len < sum)
 824                 return 1;
 825
 826         if (strcmp("STRATIPHY ANEXA", p->string_header) != 0 &&
 827             strcmp("STRATIPHY ANEXB", p->string_header) != 0)
 828                 return 1;
 829
 830         for (i = 0; i < E4_MAX_PAGE_NUMBER; i++) {
 831                 struct block_index *blockidx;
 832                 u8 blockno = p->page_number_to_block_index[i];
 833                 if (blockno >= E4_NO_SWAPPAGE_HEADERS)
 834                         continue;
 835
 836                 do {
 837                         u64 l;
 838
 839                         if (blockno >= E4_NO_SWAPPAGE_HEADERS)
 840                                 return 1;
 841
 842                         blockidx = &p->page_header[blockno++];
 843                         if ((u8 *)(blockidx + 1) - dsp  >= len)
 844                                 return 1;
 845
 846                         if (le16_to_cpu(blockidx->PageNumber) != i)
 847                                 return 1;
 848
 849                         l = E4_PAGE_BYTES(blockidx->PageSize);
 850                         sum += l;
 851                         l += le32_to_cpu(blockidx->PageOffset);
 852                         if (l > len)
 853                                 return 1;
 854
 855                 /* zero is zero regardless endianes */
 856                 } while (blockidx->NotLastBlock);
 857         }
 858
 859         return (sum == len) ? 0 : 1;
 860 }
 861
 862 /*
 863  * send data to the idma pipe
 864  * */
 865 static int uea_idma_write(struct uea_softc *sc, const void *data, u32 size)
 866 {
 867         int ret = -ENOMEM;
 868         u8 *xfer_buff;
 869         int bytes_read;
 870
 871         xfer_buff = kmemdup(data, size, GFP_KERNEL);
 872         if (!xfer_buff) {
 873                 uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
 874                 return ret;
 875         }
 876
 877         ret = usb_bulk_msg(sc->usb_dev,
 878                          usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE),
 879                          xfer_buff, size, &bytes_read, BULK_TIMEOUT);
 880
 881         kfree(xfer_buff);
 882         if (ret < 0)
 883                 return ret;
 884         if (size != bytes_read) {
 885                 uea_err(INS_TO_USBDEV(sc), "size != bytes_read %d %d\n", size,
 886                        bytes_read);
 887                 return -EIO;
 888         }
 889
 890         return 0;
 891 }
 892
 893 static int request_dsp(struct uea_softc *sc)
 894 {
 895         int ret;
 896         char *dsp_name;
 897
 898         if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
 899                 if (IS_ISDN(sc))
 900                         dsp_name = DSP4I_FIRMWARE;
 901                 else
 902                         dsp_name = DSP4P_FIRMWARE;
 903         } else if (UEA_CHIP_VERSION(sc) == ADI930) {
 904                 if (IS_ISDN(sc))
 905                         dsp_name = DSP9I_FIRMWARE;
 906                 else
 907                         dsp_name = DSP9P_FIRMWARE;
 908         } else {
 909                 if (IS_ISDN(sc))
 910                         dsp_name = DSPEI_FIRMWARE;
 911                 else
 912                         dsp_name = DSPEP_FIRMWARE;
 913         }
 914
 915         ret = reject_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev);
 916         if (ret < 0) {
 917                 uea_err(INS_TO_USBDEV(sc),
 918                        "requesting firmware %s failed with error %d\n",
 919                         dsp_name, ret);
 920                 return ret;
 921         }
 922
 923         if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
 924                 ret = check_dsp_e4(sc->dsp_firm->data, sc->dsp_firm->size);
 925         else
 926                 ret = check_dsp_e1(sc->dsp_firm->data, sc->dsp_firm->size);
 927
 928         if (ret) {
 929                 uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
 930                        dsp_name);
 931                 release_firmware(sc->dsp_firm);
 932                 sc->dsp_firm = NULL;
 933                 return -EILSEQ;
 934         }
 935
 936         return 0;
 937 }
 938
 939 /*
 940  * The uea_load_page() function must be called within a process context
 941  */
 942 static void uea_load_page_e1(struct work_struct *work)
 943 {
 944         struct uea_softc *sc = container_of(work, struct uea_softc, task);
 945         u16 pageno = sc->pageno;
 946         u16 ovl = sc->ovl;
 947         struct block_info_e1 bi;
 948
 949         const u8 *p;
 950         u8 pagecount, blockcount;
 951         u16 blockaddr, blocksize;
 952         u32 pageoffset;
 953         int i;
 954
 955         /* reload firmware when reboot start and it's loaded already */
 956         if (ovl == 0 && pageno == 0) {
 957                 release_firmware(sc->dsp_firm);
 958                 sc->dsp_firm = NULL;
 959         }
 960
 961         if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
 962                 return;
 963
 964         p = sc->dsp_firm->data;
 965         pagecount = FW_GET_BYTE(p);
 966         p += 1;
 967
 968         if (pageno >= pagecount)
 969                 goto bad1;
 970
 971         p += 4 * pageno;
 972         pageoffset = get_unaligned_le32(p);
 973
 974         if (pageoffset == 0)
 975                 goto bad1;
 976
 977         p = sc->dsp_firm->data + pageoffset;
 978         blockcount = FW_GET_BYTE(p);
 979         p += 1;
 980
 981         uea_dbg(INS_TO_USBDEV(sc),
 982                "sending %u blocks for DSP page %u\n", blockcount, pageno);
 983
 984         bi.wHdr = cpu_to_le16(UEA_BIHDR);
 985         bi.wOvl = cpu_to_le16(ovl);
 986         bi.wOvlOffset = cpu_to_le16(ovl | 0x8000);
 987
 988         for (i = 0; i < blockcount; i++) {
 989                 blockaddr = get_unaligned_le16(p);
 990                 p += 2;
 991
 992                 blocksize = get_unaligned_le16(p);
 993                 p += 2;
 994
 995                 bi.wSize = cpu_to_le16(blocksize);
 996                 bi.wAddress = cpu_to_le16(blockaddr);
 997                 bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0);
 998
 999                 /* send block info through the IDMA pipe */
1000                 if (uea_idma_write(sc, &bi, E1_BLOCK_INFO_SIZE))
1001                         goto bad2;
1002
1003                 /* send block data through the IDMA pipe */
1004                 if (uea_idma_write(sc, p, blocksize))
1005                         goto bad2;
1006
1007                 p += blocksize;
1008         }
1009
1010         return;
1011
1012 bad2:
1013         uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i);
1014         return;
1015 bad1:
1016         uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
1017 }
1018
1019 static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot)
1020 {
1021         struct block_info_e4 bi;
1022         struct block_index *blockidx;
1023         struct l1_code *p = (struct l1_code *) sc->dsp_firm->data;
1024         u8 blockno = p->page_number_to_block_index[pageno];
1025
1026         bi.wHdr = cpu_to_be16(UEA_BIHDR);
1027         bi.bBootPage = boot;
1028         bi.bPageNumber = pageno;
1029         bi.wReserved = cpu_to_be16(UEA_RESERVED);
1030
1031         do {
1032                 const u8 *blockoffset;
1033                 unsigned int blocksize;
1034
1035                 blockidx = &p->page_header[blockno];
1036                 blocksize = E4_PAGE_BYTES(blockidx->PageSize);
1037                 blockoffset = sc->dsp_firm->data + le32_to_cpu(
1038                                                         blockidx->PageOffset);
1039
1040                 bi.dwSize = cpu_to_be32(blocksize);
1041                 bi.dwAddress = cpu_to_be32(le32_to_cpu(blockidx->PageAddress));
1042
1043                 uea_dbg(INS_TO_USBDEV(sc),
1044                         "sending block %u for DSP page "
1045                         "%u size %u address %x\n",
1046                         blockno, pageno, blocksize,
1047                         le32_to_cpu(blockidx->PageAddress));
1048
1049                 /* send block info through the IDMA pipe */
1050                 if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
1051                         goto bad;
1052
1053                 /* send block data through the IDMA pipe */
1054                 if (uea_idma_write(sc, blockoffset, blocksize))
1055                         goto bad;
1056
1057                 blockno++;
1058         } while (blockidx->NotLastBlock);
1059
1060         return;
1061
1062 bad:
1063         uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", blockno);
1064         return;
1065 }
1066
1067 static void uea_load_page_e4(struct work_struct *work)
1068 {
1069         struct uea_softc *sc = container_of(work, struct uea_softc, task);
1070         u8 pageno = sc->pageno;
1071         int i;
1072         struct block_info_e4 bi;
1073         struct l1_code *p;
1074
1075         uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno);
1076
1077         /* reload firmware when reboot start and it's loaded already */
1078         if (pageno == 0) {
1079                 release_firmware(sc->dsp_firm);
1080                 sc->dsp_firm = NULL;
1081         }
1082
1083         if (sc->dsp_firm == NULL && request_dsp(sc) < 0)
1084                 return;
1085
1086         p = (struct l1_code *) sc->dsp_firm->data;
1087         if (pageno >= le16_to_cpu(p->page_header[0].PageNumber)) {
1088                 uea_err(INS_TO_USBDEV(sc), "invalid DSP "
1089                                                 "page %u requested\n", pageno);
1090                 return;
1091         }
1092
1093         if (pageno != 0) {
1094                 __uea_load_page_e4(sc, pageno, 0);
1095                 return;
1096         }
1097
1098         uea_dbg(INS_TO_USBDEV(sc),
1099                "sending Main DSP page %u\n", p->page_header[0].PageNumber);
1100
1101         for (i = 0; i < le16_to_cpu(p->page_header[0].PageNumber); i++) {
1102                 if (E4_IS_BOOT_PAGE(p->page_header[i].PageSize))
1103                         __uea_load_page_e4(sc, i, 1);
1104         }
1105
1106         uea_dbg(INS_TO_USBDEV(sc) , "sending start bi\n");
1107
1108         bi.wHdr = cpu_to_be16(UEA_BIHDR);
1109         bi.bBootPage = 0;
1110         bi.bPageNumber = 0xff;
1111         bi.wReserved = cpu_to_be16(UEA_RESERVED);
1112         bi.dwSize = cpu_to_be32(E4_PAGE_BYTES(p->page_header[0].PageSize));
1113         bi.dwAddress = cpu_to_be32(le32_to_cpu(p->page_header[0].PageAddress));
1114
1115         /* send block info through the IDMA pipe */
1116         if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
1117                 uea_err(INS_TO_USBDEV(sc), "sending DSP start bi failed\n");
1118 }
1119
1120 static inline void wake_up_cmv_ack(struct uea_softc *sc)
1121 {
1122         BUG_ON(sc->cmv_ack);
1123         sc->cmv_ack = 1;
1124         wake_up(&sc->sync_q);
1125 }
1126
1127 static inline int wait_cmv_ack(struct uea_softc *sc)
1128 {
1129         int ret = uea_wait(sc, sc->cmv_ack , ACK_TIMEOUT);
1130
1131         sc->cmv_ack = 0;
1132
1133         uea_dbg(INS_TO_USBDEV(sc), "wait_event_timeout : %d ms\n",
1134                         jiffies_to_msecs(ret));
1135
1136         if (ret < 0)
1137                 return ret;
1138
1139         return (ret == 0) ? -ETIMEDOUT : 0;
1140 }
1141
1142 #define UCDC_SEND_ENCAPSULATED_COMMAND 0x00
1143
1144 static int uea_request(struct uea_softc *sc,
1145                 u16 value, u16 index, u16 size, const void *data)
1146 {
1147         u8 *xfer_buff;
1148         int ret = -ENOMEM;
1149
1150         xfer_buff = kmemdup(data, size, GFP_KERNEL);
1151         if (!xfer_buff) {
1152                 uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
1153                 return ret;
1154         }
1155
1156         ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0),
1157                               UCDC_SEND_ENCAPSULATED_COMMAND,
1158                               USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1159                               value, index, xfer_buff, size, CTRL_TIMEOUT);
1160
1161         kfree(xfer_buff);
1162         if (ret < 0) {
1163                 uea_err(INS_TO_USBDEV(sc), "usb_control_msg error %d\n", ret);
1164                 return ret;
1165         }
1166
1167         if (ret != size) {
1168                 uea_err(INS_TO_USBDEV(sc),
1169                        "usb_control_msg send only %d bytes (instead of %d)\n",
1170                        ret, size);
1171                 return -EIO;
1172         }
1173
1174         return 0;
1175 }
1176
1177 static int uea_cmv_e1(struct uea_softc *sc,
1178                 u8 function, u32 address, u16 offset, u32 data)
1179 {
1180         struct cmv_e1 cmv;
1181         int ret;
1182
1183         uea_enters(INS_TO_USBDEV(sc));
1184         uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
1185                         "offset : 0x%04x, data : 0x%08x\n",
1186                         E1_FUNCTION_TYPE(function),
1187                         E1_FUNCTION_SUBTYPE(function),
1188                         E1_GETSA1(address), E1_GETSA2(address),
1189                         E1_GETSA3(address),
1190                         E1_GETSA4(address), offset, data);
1191
1192         /* we send a request, but we expect a reply */
1193         sc->cmv_dsc.e1.function = function | 0x2;
1194         sc->cmv_dsc.e1.idx++;
1195         sc->cmv_dsc.e1.address = address;
1196         sc->cmv_dsc.e1.offset = offset;
1197
1198         cmv.wPreamble = cpu_to_le16(E1_PREAMBLE);
1199         cmv.bDirection = E1_HOSTTOMODEM;
1200         cmv.bFunction = function;
1201         cmv.wIndex = cpu_to_le16(sc->cmv_dsc.e1.idx);
1202         put_unaligned_le32(address, &cmv.dwSymbolicAddress);
1203         cmv.wOffsetAddress = cpu_to_le16(offset);
1204         put_unaligned_le32(data >> 16 | data << 16, &cmv.dwData);
1205
1206         ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START,
1207                                                         sizeof(cmv), &cmv);
1208         if (ret < 0)
1209                 return ret;
1210         ret = wait_cmv_ack(sc);
1211         uea_leaves(INS_TO_USBDEV(sc));
1212         return ret;
1213 }
1214
1215 static int uea_cmv_e4(struct uea_softc *sc,
1216                 u16 function, u16 group, u16 address, u16 offset, u32 data)
1217 {
1218         struct cmv_e4 cmv;
1219         int ret;
1220
1221         uea_enters(INS_TO_USBDEV(sc));
1222         memset(&cmv, 0, sizeof(cmv));
1223
1224         uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Group : 0x%04x, "
1225                  "Address : 0x%04x, offset : 0x%04x, data : 0x%08x\n",
1226                  E4_FUNCTION_TYPE(function), E4_FUNCTION_SUBTYPE(function),
1227                  group, address, offset, data);
1228
1229         /* we send a request, but we expect a reply */
1230         sc->cmv_dsc.e4.function = function | (0x1 << 4);
1231         sc->cmv_dsc.e4.offset = offset;
1232         sc->cmv_dsc.e4.address = address;
1233         sc->cmv_dsc.e4.group = group;
1234
1235         cmv.wFunction = cpu_to_be16(function);
1236         cmv.wGroup = cpu_to_be16(group);
1237         cmv.wAddress = cpu_to_be16(address);
1238         cmv.wOffset = cpu_to_be16(offset);
1239         cmv.dwData[0] = cpu_to_be32(data);
1240
1241         ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START,
1242                                                         sizeof(cmv), &cmv);
1243         if (ret < 0)
1244                 return ret;
1245         ret = wait_cmv_ack(sc);
1246         uea_leaves(INS_TO_USBDEV(sc));
1247         return ret;
1248 }
1249
1250 static inline int uea_read_cmv_e1(struct uea_softc *sc,
1251                 u32 address, u16 offset, u32 *data)
1252 {
1253         int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTREAD),
1254                           address, offset, 0);
1255         if (ret < 0)
1256                 uea_err(INS_TO_USBDEV(sc),
1257                         "reading cmv failed with error %d\n", ret);
1258         else
1259                 *data = sc->data;
1260
1261         return ret;
1262 }
1263
1264 static inline int uea_read_cmv_e4(struct uea_softc *sc,
1265                 u8 size, u16 group, u16 address, u16 offset, u32 *data)
1266 {
1267         int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
1268                                                         E4_REQUESTREAD, size),
1269                           group, address, offset, 0);
1270         if (ret < 0)
1271                 uea_err(INS_TO_USBDEV(sc),
1272                         "reading cmv failed with error %d\n", ret);
1273         else {
1274                 *data = sc->data;
1275                 /* size is in 16-bit word quantities */
1276                 if (size > 2)
1277                         *(data + 1) = sc->data1;
1278         }
1279         return ret;
1280 }
1281
1282 static inline int uea_write_cmv_e1(struct uea_softc *sc,
1283                 u32 address, u16 offset, u32 data)
1284 {
1285         int ret = uea_cmv_e1(sc, E1_MAKEFUNCTION(E1_MEMACCESS, E1_REQUESTWRITE),
1286                           address, offset, data);
1287         if (ret < 0)
1288                 uea_err(INS_TO_USBDEV(sc),
1289                         "writing cmv failed with error %d\n", ret);
1290
1291         return ret;
1292 }
1293
1294 static inline int uea_write_cmv_e4(struct uea_softc *sc,
1295                 u8 size, u16 group, u16 address, u16 offset, u32 data)
1296 {
1297         int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
1298                                                         E4_REQUESTWRITE, size),
1299                           group, address, offset, data);
1300         if (ret < 0)
1301                 uea_err(INS_TO_USBDEV(sc),
1302                         "writing cmv failed with error %d\n", ret);
1303
1304         return ret;
1305 }
1306
1307 static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
1308 {
1309         int ret;
1310         u16 timeout;
1311
1312         /* in bulk mode the modem have problem with high rate
1313          * changing internal timing could improve things, but the
1314          * value is mysterious.
1315          * ADI930 don't support it (-EPIPE error).
1316          */
1317
1318         if (UEA_CHIP_VERSION(sc) == ADI930 ||
1319             altsetting[sc->modem_index] > 0 ||
1320             sc->stats.phy.dsrate == dsrate)
1321                 return;
1322
1323         /* Original timming (1Mbit/s) from ADI (used in windows driver) */
1324         timeout = (dsrate <= 1024*1024) ? 0 : 1;
1325         ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL);
1326         uea_info(INS_TO_USBDEV(sc), "setting new timeout %d%s\n",
1327                  timeout,  ret < 0 ? " failed" : "");
1328
1329 }
1330
1331 /*
1332  * Monitor the modem and update the stat
1333  * return 0 if everything is ok
1334  * return < 0 if an error occurs (-EAGAIN reboot needed)
1335  */
1336 static int uea_stat_e1(struct uea_softc *sc)
1337 {
1338         u32 data;
1339         int ret;
1340
1341         uea_enters(INS_TO_USBDEV(sc));
1342         data = sc->stats.phy.state;
1343
1344         ret = uea_read_cmv_e1(sc, E1_SA_STAT, 0, &sc->stats.phy.state);
1345         if (ret < 0)
1346                 return ret;
1347
1348         switch (GET_STATUS(sc->stats.phy.state)) {
1349         case 0:         /* not yet synchronized */
1350                 uea_dbg(INS_TO_USBDEV(sc),
1351                        "modem not yet synchronized\n");
1352                 return 0;
1353
1354         case 1:         /* initialization */
1355                 uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
1356                 return 0;
1357
1358         case 2:         /* operational */
1359                 uea_vdbg(INS_TO_USBDEV(sc), "modem operational\n");
1360                 break;
1361
1362         case 3:         /* fail ... */
1363                 uea_info(INS_TO_USBDEV(sc), "modem synchronization failed"
1364                                         " (may be try other cmv/dsp)\n");
1365                 return -EAGAIN;
1366
1367         case 4 ... 6:   /* test state */
1368                 uea_warn(INS_TO_USBDEV(sc),
1369                                 "modem in test mode - not supported\n");
1370                 return -EAGAIN;
1371
1372         case 7:         /* fast-retain ... */
1373                 uea_info(INS_TO_USBDEV(sc), "modem in fast-retain mode\n");
1374                 return 0;
1375         default:
1376                 uea_err(INS_TO_USBDEV(sc), "modem invalid SW mode %d\n",
1377                         GET_STATUS(sc->stats.phy.state));
1378                 return -EAGAIN;
1379         }
1380
1381         if (GET_STATUS(data) != 2) {
1382                 uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
1383                 uea_info(INS_TO_USBDEV(sc), "modem operational\n");
1384
1385                 /* release the dsp firmware as it is not needed until
1386                  * the next failure
1387                  */
1388                 release_firmware(sc->dsp_firm);
1389                 sc->dsp_firm = NULL;
1390         }
1391
1392         /* always update it as atm layer could not be init when we switch to
1393          * operational state
1394          */
1395         UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND);
1396
1397         /* wake up processes waiting for synchronization */
1398         wake_up(&sc->sync_q);
1399
1400         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 2, &sc->stats.phy.flags);
1401         if (ret < 0)
1402                 return ret;
1403         sc->stats.phy.mflags |= sc->stats.phy.flags;
1404
1405         /* in case of a flags ( for example delineation LOSS (& 0x10)),
1406          * we check the status again in order to detect the failure earlier
1407          */
1408         if (sc->stats.phy.flags) {
1409                 uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
1410                        sc->stats.phy.flags);
1411                 return 0;
1412         }
1413
1414         ret = uea_read_cmv_e1(sc, E1_SA_RATE, 0, &data);
1415         if (ret < 0)
1416                 return ret;
1417
1418         uea_set_bulk_timeout(sc, (data >> 16) * 32);
1419         sc->stats.phy.dsrate = (data >> 16) * 32;
1420         sc->stats.phy.usrate = (data & 0xffff) * 32;
1421         UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
1422
1423         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 23, &data);
1424         if (ret < 0)
1425                 return ret;
1426         sc->stats.phy.dsattenuation = (data & 0xff) / 2;
1427
1428         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 47, &data);
1429         if (ret < 0)
1430                 return ret;
1431         sc->stats.phy.usattenuation = (data & 0xff) / 2;
1432
1433         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 25, &sc->stats.phy.dsmargin);
1434         if (ret < 0)
1435                 return ret;
1436
1437         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 49, &sc->stats.phy.usmargin);
1438         if (ret < 0)
1439                 return ret;
1440
1441         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 51, &sc->stats.phy.rxflow);
1442         if (ret < 0)
1443                 return ret;
1444
1445         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 52, &sc->stats.phy.txflow);
1446         if (ret < 0)
1447                 return ret;
1448
1449         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 54, &sc->stats.phy.dsunc);
1450         if (ret < 0)
1451                 return ret;
1452
1453         /* only for atu-c */
1454         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 58, &sc->stats.phy.usunc);
1455         if (ret < 0)
1456                 return ret;
1457
1458         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 53, &sc->stats.phy.dscorr);
1459         if (ret < 0)
1460                 return ret;
1461
1462         /* only for atu-c */
1463         ret = uea_read_cmv_e1(sc, E1_SA_DIAG, 57, &sc->stats.phy.uscorr);
1464         if (ret < 0)
1465                 return ret;
1466
1467         ret = uea_read_cmv_e1(sc, E1_SA_INFO, 8, &sc->stats.phy.vidco);
1468         if (ret < 0)
1469                 return ret;
1470
1471         ret = uea_read_cmv_e1(sc, E1_SA_INFO, 13, &sc->stats.phy.vidcpe);
1472         if (ret < 0)
1473                 return ret;
1474
1475         return 0;
1476 }
1477
1478 static int uea_stat_e4(struct uea_softc *sc)
1479 {
1480         u32 data;
1481         u32 tmp_arr[2];
1482         int ret;
1483
1484         uea_enters(INS_TO_USBDEV(sc));
1485         data = sc->stats.phy.state;
1486
1487         /* XXX only need to be done before operationnal... */
1488         ret = uea_read_cmv_e4(sc, 1, E4_SA_STAT, 0, 0, &sc->stats.phy.state);
1489         if (ret < 0)
1490                 return ret;
1491
1492         switch (sc->stats.phy.state) {
1493         case 0x0:       /* not yet synchronized */
1494         case 0x1:
1495         case 0x3:
1496         case 0x4:
1497                 uea_dbg(INS_TO_USBDEV(sc), "modem not yet "
1498                                                 "synchronized\n");
1499                 return 0;
1500         case 0x5:       /* initialization */
1501         case 0x6:
1502         case 0x9:
1503         case 0xa:
1504                 uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
1505                 return 0;
1506         case 0x2:       /* fail ... */
1507                 uea_info(INS_TO_USBDEV(sc), "modem synchronization "
1508                                 "failed (may be try other cmv/dsp)\n");
1509                 return -EAGAIN;
1510         case 0x7:       /* operational */
1511                 break;
1512         default:
1513                 uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n",
1514                                                 sc->stats.phy.state);
1515                 return 0;
1516         }
1517
1518         if (data != 7) {
1519                 uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL);
1520                 uea_info(INS_TO_USBDEV(sc), "modem operational\n");
1521
1522                 /* release the dsp firmware as it is not needed until
1523                  * the next failure
1524                  */
1525                 release_firmware(sc->dsp_firm);
1526                 sc->dsp_firm = NULL;
1527         }
1528
1529         /* always update it as atm layer could not be init when we switch to
1530          * operational state
1531          */
1532         UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND);
1533
1534         /* wake up processes waiting for synchronization */
1535         wake_up(&sc->sync_q);
1536
1537         /* TODO improve this state machine :
1538          * we need some CMV info : what they do and their unit
1539          * we should find the equivalent of eagle3- CMV
1540          */
1541         /* check flags */
1542         ret = uea_read_cmv_e4(sc, 1, E4_SA_DIAG, 0, 0, &sc->stats.phy.flags);
1543         if (ret < 0)
1544                 return ret;
1545         sc->stats.phy.mflags |= sc->stats.phy.flags;
1546
1547         /* in case of a flags ( for example delineation LOSS (& 0x10)),
1548          * we check the status again in order to detect the failure earlier
1549          */
1550         if (sc->stats.phy.flags) {
1551                 uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
1552                        sc->stats.phy.flags);
1553                 if (sc->stats.phy.flags & 1) /* delineation LOSS */
1554                         return -EAGAIN;
1555                 if (sc->stats.phy.flags & 0x4000) /* Reset Flag */
1556                         return -EAGAIN;
1557                 return 0;
1558         }
1559
1560         /* rate data may be in upper or lower half of 64 bit word, strange */
1561         ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 0, 0, tmp_arr);
1562         if (ret < 0)
1563                 return ret;
1564         data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
1565         sc->stats.phy.usrate = data / 1000;
1566
1567         ret = uea_read_cmv_e4(sc, 4, E4_SA_RATE, 1, 0, tmp_arr);
1568         if (ret < 0)
1569                 return ret;
1570         data = (tmp_arr[0]) ? tmp_arr[0] : tmp_arr[1];
1571         uea_set_bulk_timeout(sc, data / 1000);
1572         sc->stats.phy.dsrate = data / 1000;
1573         UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424);
1574
1575         ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 1, &data);
1576         if (ret < 0)
1577                 return ret;
1578         sc->stats.phy.dsattenuation = data / 10;
1579
1580         ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 1, &data);
1581         if (ret < 0)
1582                 return ret;
1583         sc->stats.phy.usattenuation = data / 10;
1584
1585         ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 68, 3, &data);
1586         if (ret < 0)
1587                 return ret;
1588         sc->stats.phy.dsmargin = data / 2;
1589
1590         ret = uea_read_cmv_e4(sc, 1, E4_SA_INFO, 69, 3, &data);
1591         if (ret < 0)
1592                 return ret;
1593         sc->stats.phy.usmargin = data / 10;
1594
1595         return 0;
1596 }
1597
1598 static void cmvs_file_name(struct uea_softc *sc, char *const cmv_name, int ver)
1599 {
1600         char file_arr[] = "/*(DEBLOBBED)*/";
1601         char *file;
1602
1603         kernel_param_lock(THIS_MODULE);
1604         /* set proper name corresponding modem version and line type */
1605         if (cmv_file[sc->modem_index] == NULL) {
1606                 if (UEA_CHIP_VERSION(sc) == ADI930)
1607                         file_arr[3] = '9';
1608                 else if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
1609                         file_arr[3] = '4';
1610                 else
1611                         file_arr[3] = 'e';
1612
1613                 file_arr[4] = IS_ISDN(sc) ? 'i' : 'p';
1614                 file = file_arr;
1615         } else
1616                 file = cmv_file[sc->modem_index];
1617
1618         strcpy(cmv_name, FW_DIR);
1619         strlcat(cmv_name, file, UEA_FW_NAME_MAX);
1620         if (ver == 2)
1621                 strlcat(cmv_name, ".v2", UEA_FW_NAME_MAX);
1622         kernel_param_unlock(THIS_MODULE);
1623 }
1624
1625 static int request_cmvs_old(struct uea_softc *sc,
1626                  void **cmvs, const struct firmware **fw)
1627 {
1628         int ret, size;
1629         u8 *data;
1630         char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */
1631
1632         cmvs_file_name(sc, cmv_name, 1);
1633         ret = reject_firmware(fw, cmv_name, &sc->usb_dev->dev);
1634         if (ret < 0) {
1635                 uea_err(INS_TO_USBDEV(sc),
1636                        "requesting firmware %s failed with error %d\n",
1637                        cmv_name, ret);
1638                 return ret;
1639         }
1640
1641         data = (u8 *) (*fw)->data;
1642         size = (*fw)->size;
1643         if (size < 1)
1644                 goto err_fw_corrupted;
1645
1646         if (size != *data * sizeof(struct uea_cmvs_v1) + 1)
1647                 goto err_fw_corrupted;
1648
1649         *cmvs = (void *)(data + 1);
1650         return *data;
1651
1652 err_fw_corrupted:
1653         uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
1654         release_firmware(*fw);
1655         return -EILSEQ;
1656 }
1657
1658 static int request_cmvs(struct uea_softc *sc,
1659                  void **cmvs, const struct firmware **fw, int *ver)
1660 {
1661         int ret, size;
1662         u32 crc;
1663         u8 *data;
1664         char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */
1665
1666         cmvs_file_name(sc, cmv_name, 2);
1667         ret = reject_firmware(fw, cmv_name, &sc->usb_dev->dev);
1668         if (ret < 0) {
1669                 /* if caller can handle old version, try to provide it */
1670                 if (*ver == 1) {
1671                         uea_warn(INS_TO_USBDEV(sc), "requesting "
1672                                                         "firmware %s failed, "
1673                                 "try to get older cmvs\n", cmv_name);
1674                         return request_cmvs_old(sc, cmvs, fw);
1675                 }
1676                 uea_err(INS_TO_USBDEV(sc),
1677                        "requesting firmware %s failed with error %d\n",
1678                        cmv_name, ret);
1679                 return ret;
1680         }
1681
1682         size = (*fw)->size;
1683         data = (u8 *) (*fw)->data;
1684         if (size < 4 || strncmp(data, "cmv2", 4) != 0) {
1685                 if (*ver == 1) {
1686                         uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted,"
1687                                 " try to get older cmvs\n", cmv_name);
1688                         release_firmware(*fw);
1689                         return request_cmvs_old(sc, cmvs, fw);
1690                 }
1691                 goto err_fw_corrupted;
1692         }
1693
1694         *ver = 2;
1695
1696         data += 4;
1697         size -= 4;
1698         if (size < 5)
1699                 goto err_fw_corrupted;
1700
1701         crc = get_unaligned_le32(data);
1702         data += 4;
1703         size -= 4;
1704         if (crc32_be(0, data, size) != crc)
1705                 goto err_fw_corrupted;
1706
1707         if (size != *data * sizeof(struct uea_cmvs_v2) + 1)
1708                 goto err_fw_corrupted;
1709
1710         *cmvs = (void *) (data + 1);
1711         return *data;
1712
1713 err_fw_corrupted:
1714         uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", cmv_name);
1715         release_firmware(*fw);
1716         return -EILSEQ;
1717 }
1718
1719 static int uea_send_cmvs_e1(struct uea_softc *sc)
1720 {
1721         int i, ret, len;
1722         void *cmvs_ptr;
1723         const struct firmware *cmvs_fw;
1724         int ver = 1; /* we can handle v1 cmv firmware version; */
1725
1726         /* Enter in R-IDLE (cmv) until instructed otherwise */
1727         ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 1);
1728         if (ret < 0)
1729                 return ret;
1730
1731         /* Dump firmware version */
1732         ret = uea_read_cmv_e1(sc, E1_SA_INFO, 10, &sc->stats.phy.firmid);
1733         if (ret < 0)
1734                 return ret;
1735         uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
1736                         sc->stats.phy.firmid);
1737
1738         /* get options */
1739         ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
1740         if (ret < 0)
1741                 return ret;
1742
1743         /* send options */
1744         if (ver == 1) {
1745                 struct uea_cmvs_v1 *cmvs_v1 = cmvs_ptr;
1746
1747                 uea_warn(INS_TO_USBDEV(sc), "use deprecated cmvs version, "
1748                         "please update your firmware\n");
1749
1750                 for (i = 0; i < len; i++) {
1751                         ret = uea_write_cmv_e1(sc,
1752                                 get_unaligned_le32(&cmvs_v1[i].address),
1753                                 get_unaligned_le16(&cmvs_v1[i].offset),
1754                                 get_unaligned_le32(&cmvs_v1[i].data));
1755                         if (ret < 0)
1756                                 goto out;
1757                 }
1758         } else if (ver == 2) {
1759                 struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
1760
1761                 for (i = 0; i < len; i++) {
1762                         ret = uea_write_cmv_e1(sc,
1763                                 get_unaligned_le32(&cmvs_v2[i].address),
1764                                 (u16) get_unaligned_le32(&cmvs_v2[i].offset),
1765                                 get_unaligned_le32(&cmvs_v2[i].data));
1766                         if (ret < 0)
1767                                 goto out;
1768                 }
1769         } else {
1770                 /* This really should not happen */
1771                 uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
1772                 goto out;
1773         }
1774
1775         /* Enter in R-ACT-REQ */
1776         ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 2);
1777         uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
1778         uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
1779                                                 "synchronization...\n");
1780 out:
1781         release_firmware(cmvs_fw);
1782         return ret;
1783 }
1784
1785 static int uea_send_cmvs_e4(struct uea_softc *sc)
1786 {
1787         int i, ret, len;
1788         void *cmvs_ptr;
1789         const struct firmware *cmvs_fw;
1790         int ver = 2; /* we can only handle v2 cmv firmware version; */
1791
1792         /* Enter in R-IDLE (cmv) until instructed otherwise */
1793         ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 1);
1794         if (ret < 0)
1795                 return ret;
1796
1797         /* Dump firmware version */
1798         /* XXX don't read the 3th byte as it is always 6 */
1799         ret = uea_read_cmv_e4(sc, 2, E4_SA_INFO, 55, 0, &sc->stats.phy.firmid);
1800         if (ret < 0)
1801                 return ret;
1802         uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n",
1803                         sc->stats.phy.firmid);
1804
1805
1806         /* get options */
1807         ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
1808         if (ret < 0)
1809                 return ret;
1810
1811         /* send options */
1812         if (ver == 2) {
1813                 struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
1814
1815                 for (i = 0; i < len; i++) {
1816                         ret = uea_write_cmv_e4(sc, 1,
1817                                 get_unaligned_le32(&cmvs_v2[i].group),
1818                                 get_unaligned_le32(&cmvs_v2[i].address),
1819                                 get_unaligned_le32(&cmvs_v2[i].offset),
1820                                 get_unaligned_le32(&cmvs_v2[i].data));
1821                         if (ret < 0)
1822                                 goto out;
1823                 }
1824         } else {
1825                 /* This really should not happen */
1826                 uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
1827                 goto out;
1828         }
1829
1830         /* Enter in R-ACT-REQ */
1831         ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 2);
1832         uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
1833         uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
1834                                                 "synchronization...\n");
1835 out:
1836         release_firmware(cmvs_fw);
1837         return ret;
1838 }
1839
1840 /* Start boot post firmware modem:
1841  * - send reset commands through usb control pipe
1842  * - start workqueue for DSP loading
1843  * - send CMV options to modem
1844  */
1845
1846 static int uea_start_reset(struct uea_softc *sc)
1847 {
1848         u16 zero = 0;   /* ;-) */
1849         int ret;
1850
1851         uea_enters(INS_TO_USBDEV(sc));
1852         uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");
1853
1854         /* mask interrupt */
1855         sc->booting = 1;
1856         /* We need to set this here because, a ack timeout could have occurred,
1857          * but before we start the reboot, the ack occurs and set this to 1.
1858          * So we will failed to wait Ready CMV.
1859          */
1860         sc->cmv_ack = 0;
1861         UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);
1862
1863         /* reset statistics */
1864         memset(&sc->stats, 0, sizeof(struct uea_stats));
1865
1866         /* tell the modem that we want to boot in IDMA mode */
1867         uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
1868         uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL);
1869
1870         /* enter reset mode */
1871         uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL);
1872
1873         /* original driver use 200ms, but windows driver use 100ms */
1874         ret = uea_wait(sc, 0, msecs_to_jiffies(100));
1875         if (ret < 0)
1876                 return ret;
1877
1878         /* leave reset mode */
1879         uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL);
1880
1881         if (UEA_CHIP_VERSION(sc) != EAGLE_IV) {
1882                 /* clear tx and rx mailboxes */
1883                 uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
1884                 uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
1885                 uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
1886         }
1887
1888         ret = uea_wait(sc, 0, msecs_to_jiffies(1000));
1889         if (ret < 0)
1890                 return ret;
1891
1892         if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
1893                 sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
1894                                                         E4_MODEMREADY, 1);
1895         else
1896                 sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
1897                                                         E1_MODEMREADY);
1898
1899         /* demask interrupt */
1900         sc->booting = 0;
1901
1902         /* start loading DSP */
1903         sc->pageno = 0;
1904         sc->ovl = 0;
1905         schedule_work(&sc->task);
1906
1907         /* wait for modem ready CMV */
1908         ret = wait_cmv_ack(sc);
1909         if (ret < 0)
1910                 return ret;
1911
1912         uea_vdbg(INS_TO_USBDEV(sc), "Ready CMV received\n");
1913
1914         ret = sc->send_cmvs(sc);
1915         if (ret < 0)
1916                 return ret;
1917
1918         sc->reset = 0;
1919         uea_leaves(INS_TO_USBDEV(sc));
1920         return ret;
1921 }
1922
1923 /*
1924  * In case of an error wait 1s before rebooting the modem
1925  * if the modem don't request reboot (-EAGAIN).
1926  * Monitor the modem every 1s.
1927  */
1928
1929 static int uea_kthread(void *data)
1930 {
1931         struct uea_softc *sc = data;
1932         int ret = -EAGAIN;
1933
1934         set_freezable();
1935         uea_enters(INS_TO_USBDEV(sc));
1936         while (!kthread_should_stop()) {
1937                 if (ret < 0 || sc->reset)
1938                         ret = uea_start_reset(sc);
1939                 if (!ret)
1940                         ret = sc->stat(sc);
1941                 if (ret != -EAGAIN)
1942                         uea_wait(sc, 0, msecs_to_jiffies(1000));
1943                 try_to_freeze();
1944         }
1945         uea_leaves(INS_TO_USBDEV(sc));
1946         return ret;
1947 }
1948
1949 /* Load second usb firmware for ADI930 chip */
1950 static int load_XILINX_firmware(struct uea_softc *sc)
1951 {
1952         const struct firmware *fw_entry;
1953         int ret, size, u, ln;
1954         const u8 *pfw;
1955         u8 value;
1956         char *fw_name = FPGA930_FIRMWARE;
1957
1958         uea_enters(INS_TO_USBDEV(sc));
1959
1960         ret = reject_firmware(&fw_entry, fw_name, &sc->usb_dev->dev);
1961         if (ret) {
1962                 uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n",
1963                        fw_name);
1964                 goto err0;
1965         }
1966
1967         pfw = fw_entry->data;
1968         size = fw_entry->size;
1969         if (size != 0x577B) {
1970                 uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n",
1971                        fw_name);
1972                 ret = -EILSEQ;
1973                 goto err1;
1974         }
1975         for (u = 0; u < size; u += ln) {
1976                 ln = min(size - u, 64);
1977                 ret = uea_request(sc, 0xe, 0, ln, pfw + u);
1978                 if (ret < 0) {
1979                         uea_err(INS_TO_USBDEV(sc),
1980                                "elsa download data failed (%d)\n", ret);
1981                         goto err1;
1982                 }
1983         }
1984
1985         /* finish to send the fpga */
1986         ret = uea_request(sc, 0xe, 1, 0, NULL);
1987         if (ret < 0) {
1988                 uea_err(INS_TO_USBDEV(sc),
1989                                 "elsa download data failed (%d)\n", ret);
1990                 goto err1;
1991         }
1992
1993         /* Tell the modem we finish : de-assert reset */
1994         value = 0;
1995         ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
1996         if (ret < 0)
1997                 uea_err(sc->usb_dev, "elsa de-assert failed with error"
1998                                                                 " %d\n", ret);
1999
2000 err1:
2001         release_firmware(fw_entry);
2002 err0:
2003         uea_leaves(INS_TO_USBDEV(sc));
2004         return ret;
2005 }
2006
2007 /* The modem send us an ack. First with check if it right */
2008 static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr)
2009 {
2010         struct cmv_dsc_e1 *dsc = &sc->cmv_dsc.e1;
2011         struct cmv_e1 *cmv = &intr->u.e1.s2.cmv;
2012
2013         uea_enters(INS_TO_USBDEV(sc));
2014         if (le16_to_cpu(cmv->wPreamble) != E1_PREAMBLE)
2015                 goto bad1;
2016
2017         if (cmv->bDirection != E1_MODEMTOHOST)
2018                 goto bad1;
2019
2020         /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
2021          * the first MEMACCESS cmv. Ignore it...
2022          */
2023         if (cmv->bFunction != dsc->function) {
2024                 if (UEA_CHIP_VERSION(sc) == ADI930
2025                                 && cmv->bFunction ==  E1_MAKEFUNCTION(2, 2)) {
2026                         cmv->wIndex = cpu_to_le16(dsc->idx);
2027                         put_unaligned_le32(dsc->address,
2028                                                 &cmv->dwSymbolicAddress);
2029                         cmv->wOffsetAddress = cpu_to_le16(dsc->offset);
2030                 } else
2031                         goto bad2;
2032         }
2033
2034         if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
2035                                                         E1_MODEMREADY)) {
2036                 wake_up_cmv_ack(sc);
2037                 uea_leaves(INS_TO_USBDEV(sc));
2038                 return;
2039         }
2040
2041         /* in case of MEMACCESS */
2042         if (le16_to_cpu(cmv->wIndex) != dsc->idx ||
2043             get_unaligned_le32(&cmv->dwSymbolicAddress) != dsc->address ||
2044             le16_to_cpu(cmv->wOffsetAddress) != dsc->offset)
2045                 goto bad2;
2046
2047         sc->data = get_unaligned_le32(&cmv->dwData);
2048         sc->data = sc->data << 16 | sc->data >> 16;
2049
2050         wake_up_cmv_ack(sc);
2051         uea_leaves(INS_TO_USBDEV(sc));
2052         return;
2053
2054 bad2:
2055         uea_err(INS_TO_USBDEV(sc), "unexpected cmv received, "
2056                         "Function : %d, Subfunction : %d\n",
2057                         E1_FUNCTION_TYPE(cmv->bFunction),
2058                         E1_FUNCTION_SUBTYPE(cmv->bFunction));
2059         uea_leaves(INS_TO_USBDEV(sc));
2060         return;
2061
2062 bad1:
2063         uea_err(INS_TO_USBDEV(sc), "invalid cmv received, "
2064                         "wPreamble %d, bDirection %d\n",
2065                         le16_to_cpu(cmv->wPreamble), cmv->bDirection);
2066         uea_leaves(INS_TO_USBDEV(sc));
2067 }
2068
2069 /* The modem send us an ack. First with check if it right */
2070 static void uea_dispatch_cmv_e4(struct uea_softc *sc, struct intr_pkt *intr)
2071 {
2072         struct cmv_dsc_e4 *dsc = &sc->cmv_dsc.e4;
2073         struct cmv_e4 *cmv = &intr->u.e4.s2.cmv;
2074
2075         uea_enters(INS_TO_USBDEV(sc));
2076         uea_dbg(INS_TO_USBDEV(sc), "cmv %x %x %x %x %x %x\n",
2077                 be16_to_cpu(cmv->wGroup), be16_to_cpu(cmv->wFunction),
2078                 be16_to_cpu(cmv->wOffset), be16_to_cpu(cmv->wAddress),
2079                 be32_to_cpu(cmv->dwData[0]), be32_to_cpu(cmv->dwData[1]));
2080
2081         if (be16_to_cpu(cmv->wFunction) != dsc->function)
2082                 goto bad2;
2083
2084         if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
2085                                                 E4_MODEMREADY, 1)) {
2086                 wake_up_cmv_ack(sc);
2087                 uea_leaves(INS_TO_USBDEV(sc));
2088                 return;
2089         }
2090
2091         /* in case of MEMACCESS */
2092         if (be16_to_cpu(cmv->wOffset) != dsc->offset ||
2093             be16_to_cpu(cmv->wGroup) != dsc->group ||
2094             be16_to_cpu(cmv->wAddress) != dsc->address)
2095                 goto bad2;
2096
2097         sc->data = be32_to_cpu(cmv->dwData[0]);
2098         sc->data1 = be32_to_cpu(cmv->dwData[1]);
2099         wake_up_cmv_ack(sc);
2100         uea_leaves(INS_TO_USBDEV(sc));
2101         return;
2102
2103 bad2:
2104         uea_err(INS_TO_USBDEV(sc), "unexpected cmv received, "
2105                         "Function : %d, Subfunction : %d\n",
2106                         E4_FUNCTION_TYPE(cmv->wFunction),
2107                         E4_FUNCTION_SUBTYPE(cmv->wFunction));
2108         uea_leaves(INS_TO_USBDEV(sc));
2109         return;
2110 }
2111
2112 static void uea_schedule_load_page_e1(struct uea_softc *sc,
2113                                                 struct intr_pkt *intr)
2114 {
2115         sc->pageno = intr->e1_bSwapPageNo;
2116         sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4;
2117         schedule_work(&sc->task);
2118 }
2119
2120 static void uea_schedule_load_page_e4(struct uea_softc *sc,
2121                                                 struct intr_pkt *intr)
2122 {
2123         sc->pageno = intr->e4_bSwapPageNo;
2124         schedule_work(&sc->task);
2125 }
2126
2127 /*
2128  * interrupt handler
2129  */
2130 static void uea_intr(struct urb *urb)
2131 {
2132         struct uea_softc *sc = urb->context;
2133         struct intr_pkt *intr = urb->transfer_buffer;
2134         int status = urb->status;
2135
2136         uea_enters(INS_TO_USBDEV(sc));
2137
2138         if (unlikely(status < 0)) {
2139                 uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n",
2140                        status);
2141                 return;
2142         }
2143
2144         /* device-to-host interrupt */
2145         if (intr->bType != 0x08 || sc->booting) {
2146                 uea_err(INS_TO_USBDEV(sc), "wrong interrupt\n");
2147                 goto resubmit;
2148         }
2149
2150         switch (le16_to_cpu(intr->wInterrupt)) {
2151         case INT_LOADSWAPPAGE:
2152                 sc->schedule_load_page(sc, intr);
2153                 break;
2154
2155         case INT_INCOMINGCMV:
2156                 sc->dispatch_cmv(sc, intr);
2157                 break;
2158
2159         default:
2160                 uea_err(INS_TO_USBDEV(sc), "unknown interrupt %u\n",
2161                        le16_to_cpu(intr->wInterrupt));
2162         }
2163
2164 resubmit:
2165         usb_submit_urb(sc->urb_int, GFP_ATOMIC);
2166 }
2167
2168 /*
2169  * Start the modem : init the data and start kernel thread
2170  */
2171 static int uea_boot(struct uea_softc *sc, struct usb_interface *intf)
2172 {
2173         struct intr_pkt *intr;
2174         int ret = -ENOMEM;
2175         int size;
2176
2177         uea_enters(INS_TO_USBDEV(sc));
2178
2179         if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
2180                 size = E4_INTR_PKT_SIZE;
2181                 sc->dispatch_cmv = uea_dispatch_cmv_e4;
2182                 sc->schedule_load_page = uea_schedule_load_page_e4;
2183                 sc->stat = uea_stat_e4;
2184                 sc->send_cmvs = uea_send_cmvs_e4;
2185                 INIT_WORK(&sc->task, uea_load_page_e4);
2186         } else {
2187                 size = E1_INTR_PKT_SIZE;
2188                 sc->dispatch_cmv = uea_dispatch_cmv_e1;
2189                 sc->schedule_load_page = uea_schedule_load_page_e1;
2190                 sc->stat = uea_stat_e1;
2191                 sc->send_cmvs = uea_send_cmvs_e1;
2192                 INIT_WORK(&sc->task, uea_load_page_e1);
2193         }
2194
2195         init_waitqueue_head(&sc->sync_q);
2196
2197         if (UEA_CHIP_VERSION(sc) == ADI930)
2198                 load_XILINX_firmware(sc);
2199
2200         if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
2201                 ret = -ENODEV;
2202                 goto err0;
2203         }
2204
2205         intr = kmalloc(size, GFP_KERNEL);
2206         if (!intr)
2207                 goto err0;
2208
2209         sc->urb_int = usb_alloc_urb(0, GFP_KERNEL);
2210         if (!sc->urb_int)
2211                 goto err1;
2212
2213         usb_fill_int_urb(sc->urb_int, sc->usb_dev,
2214                          usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
2215                          intr, size, uea_intr, sc,
2216                          intf->cur_altsetting->endpoint[0].desc.bInterval);
2217
2218         ret = usb_submit_urb(sc->urb_int, GFP_KERNEL);
2219         if (ret < 0) {
2220                 uea_err(INS_TO_USBDEV(sc),
2221                        "urb submission failed with error %d\n", ret);
2222                 goto err1;
2223         }
2224
2225         /* Create worker thread, but don't start it here.  Start it after
2226          * all usbatm generic initialization is done.
2227          */
2228         sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm");
2229         if (IS_ERR(sc->kthread)) {
2230                 uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
2231                 ret = PTR_ERR(sc->kthread);
2232                 goto err2;
2233         }
2234
2235         uea_leaves(INS_TO_USBDEV(sc));
2236         return 0;
2237
2238 err2:
2239         usb_kill_urb(sc->urb_int);
2240 err1:
2241         usb_free_urb(sc->urb_int);
2242         sc->urb_int = NULL;
2243         kfree(intr);
2244 err0:
2245         uea_leaves(INS_TO_USBDEV(sc));
2246         return ret;
2247 }
2248
2249 /*
2250  * Stop the modem : kill kernel thread and free data
2251  */
2252 static void uea_stop(struct uea_softc *sc)
2253 {
2254         int ret;
2255         uea_enters(INS_TO_USBDEV(sc));
2256         ret = kthread_stop(sc->kthread);
2257         uea_dbg(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
2258
2259         uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
2260
2261         usb_kill_urb(sc->urb_int);
2262         kfree(sc->urb_int->transfer_buffer);
2263         usb_free_urb(sc->urb_int);
2264
2265         /* flush the work item, when no one can schedule it */
2266         flush_work(&sc->task);
2267
2268         release_firmware(sc->dsp_firm);
2269         uea_leaves(INS_TO_USBDEV(sc));
2270 }
2271
2272 /* syfs interface */
2273 static struct uea_softc *dev_to_uea(struct device *dev)
2274 {
2275         struct usb_interface *intf;
2276         struct usbatm_data *usbatm;
2277
2278         intf = to_usb_interface(dev);
2279         if (!intf)
2280                 return NULL;
2281
2282         usbatm = usb_get_intfdata(intf);
2283         if (!usbatm)
2284                 return NULL;
2285
2286         return usbatm->driver_data;
2287 }
2288
2289 static ssize_t stat_status_show(struct device *dev, struct device_attribute *attr,
2290                 char *buf)
2291 {
2292         int ret = -ENODEV;
2293         struct uea_softc *sc;
2294
2295         mutex_lock(&uea_mutex);
2296         sc = dev_to_uea(dev);
2297         if (!sc)
2298                 goto out;
2299         ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state);
2300 out:
2301         mutex_unlock(&uea_mutex);
2302         return ret;
2303 }
2304
2305 static ssize_t stat_status_store(struct device *dev, struct device_attribute *attr,
2306                 const char *buf, size_t count)
2307 {
2308         int ret = -ENODEV;
2309         struct uea_softc *sc;
2310
2311         mutex_lock(&uea_mutex);
2312         sc = dev_to_uea(dev);
2313         if (!sc)
2314                 goto out;
2315         sc->reset = 1;
2316         ret = count;
2317 out:
2318         mutex_unlock(&uea_mutex);
2319         return ret;
2320 }
2321
2322 static DEVICE_ATTR_RW(stat_status);
2323
2324 static ssize_t stat_human_status_show(struct device *dev,
2325                         struct device_attribute *attr, char *buf)
2326 {
2327         int ret = -ENODEV;
2328         int modem_state;
2329         struct uea_softc *sc;
2330
2331         mutex_lock(&uea_mutex);
2332         sc = dev_to_uea(dev);
2333         if (!sc)
2334                 goto out;
2335
2336         if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
2337                 switch (sc->stats.phy.state) {
2338                 case 0x0:       /* not yet synchronized */
2339                 case 0x1:
2340                 case 0x3:
2341                 case 0x4:
2342                         modem_state = 0;
2343                         break;
2344                 case 0x5:       /* initialization */
2345                 case 0x6:
2346                 case 0x9:
2347                 case 0xa:
2348                         modem_state = 1;
2349                         break;
2350                 case 0x7:       /* operational */
2351                         modem_state = 2;
2352                         break;
2353                 case 0x2:       /* fail ... */
2354                         modem_state = 3;
2355                         break;
2356                 default:        /* unknown */
2357                         modem_state = 4;
2358                         break;
2359                 }
2360         } else
2361                 modem_state = GET_STATUS(sc->stats.phy.state);
2362
2363         switch (modem_state) {
2364         case 0:
2365                 ret = sprintf(buf, "Modem is booting\n");
2366                 break;
2367         case 1:
2368                 ret = sprintf(buf, "Modem is initializing\n");
2369                 break;
2370         case 2:
2371                 ret = sprintf(buf, "Modem is operational\n");
2372                 break;
2373         case 3:
2374                 ret = sprintf(buf, "Modem synchronization failed\n");
2375                 break;
2376         default:
2377                 ret = sprintf(buf, "Modem state is unknown\n");
2378                 break;
2379         }
2380 out:
2381         mutex_unlock(&uea_mutex);
2382         return ret;
2383 }
2384
2385 static DEVICE_ATTR_RO(stat_human_status);
2386
2387 static ssize_t stat_delin_show(struct device *dev, struct device_attribute *attr,
2388                 char *buf)
2389 {
2390         int ret = -ENODEV;
2391         struct uea_softc *sc;
2392         char *delin = "GOOD";
2393
2394         mutex_lock(&uea_mutex);
2395         sc = dev_to_uea(dev);
2396         if (!sc)
2397                 goto out;
2398
2399         if (UEA_CHIP_VERSION(sc) == EAGLE_IV) {
2400                 if (sc->stats.phy.flags & 0x4000)
2401                         delin = "RESET";
2402                 else if (sc->stats.phy.flags & 0x0001)
2403                         delin = "LOSS";
2404         } else {
2405                 if (sc->stats.phy.flags & 0x0C00)
2406                         delin = "ERROR";
2407                 else if (sc->stats.phy.flags & 0x0030)
2408                         delin = "LOSS";
2409         }
2410
2411         ret = sprintf(buf, "%s\n", delin);
2412 out:
2413         mutex_unlock(&uea_mutex);
2414         return ret;
2415 }
2416
2417 static DEVICE_ATTR_RO(stat_delin);
2418
2419 #define UEA_ATTR(name, reset)                                   \
2420                                                                 \
2421 static ssize_t stat_##name##_show(struct device *dev,           \
2422                 struct device_attribute *attr, char *buf)       \
2423 {                                                               \
2424         int ret = -ENODEV;                                      \
2425         struct uea_softc *sc;                                   \
2426                                                                 \
2427         mutex_lock(&uea_mutex);                                 \
2428         sc = dev_to_uea(dev);                                   \
2429         if (!sc)                                                \
2430                 goto out;                                       \
2431         ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name);  \
2432         if (reset)                                              \
2433                 sc->stats.phy.name = 0;                         \
2434 out:                                                            \
2435         mutex_unlock(&uea_mutex);                               \
2436         return ret;                                             \
2437 }                                                               \
2438                                                                 \
2439 static DEVICE_ATTR_RO(stat_##name)
2440
2441 UEA_ATTR(mflags, 1);
2442 UEA_ATTR(vidcpe, 0);
2443 UEA_ATTR(usrate, 0);
2444 UEA_ATTR(dsrate, 0);
2445 UEA_ATTR(usattenuation, 0);
2446 UEA_ATTR(dsattenuation, 0);
2447 UEA_ATTR(usmargin, 0);
2448 UEA_ATTR(dsmargin, 0);
2449 UEA_ATTR(txflow, 0);
2450 UEA_ATTR(rxflow, 0);
2451 UEA_ATTR(uscorr, 0);
2452 UEA_ATTR(dscorr, 0);
2453 UEA_ATTR(usunc, 0);
2454 UEA_ATTR(dsunc, 0);
2455 UEA_ATTR(firmid, 0);
2456
2457 /* Retrieve the device End System Identifier (MAC) */
2458
2459 static int uea_getesi(struct uea_softc *sc, u_char *esi)
2460 {
2461         unsigned char mac_str[2 * ETH_ALEN + 1];
2462         int i;
2463         if (usb_string
2464             (sc->usb_dev, sc->usb_dev->descriptor.iSerialNumber, mac_str,
2465              sizeof(mac_str)) != 2 * ETH_ALEN)
2466                 return 1;
2467
2468         for (i = 0; i < ETH_ALEN; i++)
2469                 esi[i] = hex_to_bin(mac_str[2 * i]) * 16 +
2470                          hex_to_bin(mac_str[2 * i + 1]);
2471
2472         return 0;
2473 }
2474
2475 /* ATM stuff */
2476 static int uea_atm_open(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
2477 {
2478         struct uea_softc *sc = usbatm->driver_data;
2479
2480         return uea_getesi(sc, atm_dev->esi);
2481 }
2482
2483 static int uea_heavy(struct usbatm_data *usbatm, struct usb_interface *intf)
2484 {
2485         struct uea_softc *sc = usbatm->driver_data;
2486
2487         wait_event_interruptible(sc->sync_q, IS_OPERATIONAL(sc));
2488
2489         return 0;
2490
2491 }
2492
2493 static int claim_interface(struct usb_device *usb_dev,
2494                            struct usbatm_data *usbatm, int ifnum)
2495 {
2496         int ret;
2497         struct usb_interface *intf = usb_ifnum_to_if(usb_dev, ifnum);
2498
2499         if (!intf) {
2500                 uea_err(usb_dev, "interface %d not found\n", ifnum);
2501                 return -ENODEV;
2502         }
2503
2504         ret = usb_driver_claim_interface(&uea_driver, intf, usbatm);
2505         if (ret != 0)
2506                 uea_err(usb_dev, "can't claim interface %d, error %d\n", ifnum,
2507                        ret);
2508         return ret;
2509 }
2510
2511 static struct attribute *attrs[] = {
2512         &dev_attr_stat_status.attr,
2513         &dev_attr_stat_mflags.attr,
2514         &dev_attr_stat_human_status.attr,
2515         &dev_attr_stat_delin.attr,
2516         &dev_attr_stat_vidcpe.attr,
2517         &dev_attr_stat_usrate.attr,
2518         &dev_attr_stat_dsrate.attr,
2519         &dev_attr_stat_usattenuation.attr,
2520         &dev_attr_stat_dsattenuation.attr,
2521         &dev_attr_stat_usmargin.attr,
2522         &dev_attr_stat_dsmargin.attr,
2523         &dev_attr_stat_txflow.attr,
2524         &dev_attr_stat_rxflow.attr,
2525         &dev_attr_stat_uscorr.attr,
2526         &dev_attr_stat_dscorr.attr,
2527         &dev_attr_stat_usunc.attr,
2528         &dev_attr_stat_dsunc.attr,
2529         &dev_attr_stat_firmid.attr,
2530         NULL,
2531 };
2532 static const struct attribute_group attr_grp = {
2533         .attrs = attrs,
2534 };
2535
2536 static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
2537                    const struct usb_device_id *id)
2538 {
2539         struct usb_device *usb = interface_to_usbdev(intf);
2540         struct uea_softc *sc;
2541         int ret, ifnum = intf->altsetting->desc.bInterfaceNumber;
2542         unsigned int alt;
2543
2544         uea_enters(usb);
2545
2546         /* interface 0 is for firmware/monitoring */
2547         if (ifnum != UEA_INTR_IFACE_NO)
2548                 return -ENODEV;
2549
2550         usbatm->flags = (sync_wait[modem_index] ? 0 : UDSL_SKIP_HEAVY_INIT);
2551
2552         /* interface 1 is for outbound traffic */
2553         ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO);
2554         if (ret < 0)
2555                 return ret;
2556
2557         /* ADI930 has only 2 interfaces and inbound traffic is on interface 1 */
2558         if (UEA_CHIP_VERSION(id) != ADI930) {
2559                 /* interface 2 is for inbound traffic */
2560                 ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO);
2561                 if (ret < 0)
2562                         return ret;
2563         }
2564
2565         sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
2566         if (!sc)
2567                 return -ENOMEM;
2568
2569         sc->usb_dev = usb;
2570         usbatm->driver_data = sc;
2571         sc->usbatm = usbatm;
2572         sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
2573         sc->driver_info = id->driver_info;
2574
2575         /* first try to use module parameter */
2576         if (annex[sc->modem_index] == 1)
2577                 sc->annex = ANNEXA;
2578         else if (annex[sc->modem_index] == 2)
2579                 sc->annex = ANNEXB;
2580         /* try to autodetect annex */
2581         else if (sc->driver_info & AUTO_ANNEX_A)
2582                 sc->annex = ANNEXA;
2583         else if (sc->driver_info & AUTO_ANNEX_B)
2584                 sc->annex = ANNEXB;
2585         else
2586                 sc->annex = (le16_to_cpu
2587                 (sc->usb_dev->descriptor.bcdDevice) & 0x80) ? ANNEXB : ANNEXA;
2588
2589         alt = altsetting[sc->modem_index];
2590         /* ADI930 don't support iso */
2591         if (UEA_CHIP_VERSION(id) != ADI930 && alt > 0) {
2592                 if (alt <= 8 &&
2593                         usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) {
2594                         uea_dbg(usb, "set alternate %u for 2 interface\n", alt);
2595                         uea_info(usb, "using iso mode\n");
2596                         usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
2597                 } else {
2598                         uea_err(usb, "setting alternate %u failed for "
2599                                         "2 interface, using bulk mode\n", alt);
2600                 }
2601         }
2602
2603         ret = sysfs_create_group(&intf->dev.kobj, &attr_grp);
2604         if (ret < 0)
2605                 goto error;
2606
2607         ret = uea_boot(sc, intf);
2608         if (ret < 0)
2609                 goto error_rm_grp;
2610
2611         return 0;
2612
2613 error_rm_grp:
2614         sysfs_remove_group(&intf->dev.kobj, &attr_grp);
2615 error:
2616         kfree(sc);
2617         return ret;
2618 }
2619
2620 static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
2621 {
2622         struct uea_softc *sc = usbatm->driver_data;
2623
2624         sysfs_remove_group(&intf->dev.kobj, &attr_grp);
2625         uea_stop(sc);
2626         kfree(sc);
2627 }
2628
2629 static struct usbatm_driver uea_usbatm_driver = {
2630         .driver_name = "ueagle-atm",
2631         .bind = uea_bind,
2632         .atm_start = uea_atm_open,
2633         .unbind = uea_unbind,
2634         .heavy_init = uea_heavy,
2635         .bulk_in = UEA_BULK_DATA_PIPE,
2636         .bulk_out = UEA_BULK_DATA_PIPE,
2637         .isoc_in = UEA_ISO_DATA_PIPE,
2638 };
2639
2640 static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
2641 {
2642         struct usb_device *usb = interface_to_usbdev(intf);
2643         int ret;
2644
2645         uea_enters(usb);
2646         uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n",
2647                 le16_to_cpu(usb->descriptor.idVendor),
2648                 le16_to_cpu(usb->descriptor.idProduct),
2649                 le16_to_cpu(usb->descriptor.bcdDevice),
2650                 chip_name[UEA_CHIP_VERSION(id)]);
2651
2652         usb_reset_device(usb);
2653
2654         if (UEA_IS_PREFIRM(id))
2655                 return uea_load_firmware(usb, UEA_CHIP_VERSION(id));
2656
2657         ret = usbatm_usb_probe(intf, id, &uea_usbatm_driver);
2658         if (ret == 0) {
2659                 struct usbatm_data *usbatm = usb_get_intfdata(intf);
2660                 struct uea_softc *sc = usbatm->driver_data;
2661
2662                 /* Ensure carrier is initialized to off as early as possible */
2663                 UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);
2664
2665                 /* Only start the worker thread when all init is done */
2666                 wake_up_process(sc->kthread);
2667         }
2668
2669         return ret;
2670 }
2671
2672 static void uea_disconnect(struct usb_interface *intf)
2673 {
2674         struct usb_device *usb = interface_to_usbdev(intf);
2675         int ifnum = intf->altsetting->desc.bInterfaceNumber;
2676         uea_enters(usb);
2677
2678         /* ADI930 has 2 interfaces and eagle 3 interfaces.
2679          * Pre-firmware device has one interface
2680          */
2681         if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) {
2682                 mutex_lock(&uea_mutex);
2683                 usbatm_usb_disconnect(intf);
2684                 mutex_unlock(&uea_mutex);
2685                 uea_info(usb, "ADSL device removed\n");
2686         }
2687
2688         uea_leaves(usb);
2689 }
2690
2691 /*
2692  * List of supported VID/PID
2693  */
2694 static const struct usb_device_id uea_ids[] = {
2695         {USB_DEVICE(ANALOG_VID, ADI930_PID_PREFIRM),
2696                 .driver_info = ADI930 | PREFIRM},
2697         {USB_DEVICE(ANALOG_VID, ADI930_PID_PSTFIRM),
2698                 .driver_info = ADI930 | PSTFIRM},
2699         {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PREFIRM),
2700                 .driver_info = EAGLE_I | PREFIRM},
2701         {USB_DEVICE(ANALOG_VID, EAGLE_I_PID_PSTFIRM),
2702                 .driver_info = EAGLE_I | PSTFIRM},
2703         {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PREFIRM),
2704                 .driver_info = EAGLE_II | PREFIRM},
2705         {USB_DEVICE(ANALOG_VID, EAGLE_II_PID_PSTFIRM),
2706                 .driver_info = EAGLE_II | PSTFIRM},
2707         {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PREFIRM),
2708                 .driver_info = EAGLE_II | PREFIRM},
2709         {USB_DEVICE(ANALOG_VID, EAGLE_IIC_PID_PSTFIRM),
2710                 .driver_info = EAGLE_II | PSTFIRM},
2711         {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PREFIRM),
2712                 .driver_info = EAGLE_III | PREFIRM},
2713         {USB_DEVICE(ANALOG_VID, EAGLE_III_PID_PSTFIRM),
2714                 .driver_info = EAGLE_III | PSTFIRM},
2715         {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PREFIRM),
2716                 .driver_info = EAGLE_IV | PREFIRM},
2717         {USB_DEVICE(ANALOG_VID, EAGLE_IV_PID_PSTFIRM),
2718                 .driver_info = EAGLE_IV | PSTFIRM},
2719         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PREFIRM),
2720                 .driver_info = EAGLE_I | PREFIRM},
2721         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_A_PID_PSTFIRM),
2722                 .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
2723         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PREFIRM),
2724                 .driver_info = EAGLE_I | PREFIRM},
2725         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_I_B_PID_PSTFIRM),
2726                 .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
2727         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PREFIRM),
2728                 .driver_info = EAGLE_II | PREFIRM},
2729         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_A_PID_PSTFIRM),
2730                 .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A},
2731         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PREFIRM),
2732                 .driver_info = EAGLE_II | PREFIRM},
2733         {USB_DEVICE(DEVOLO_VID, DEVOLO_EAGLE_II_B_PID_PSTFIRM),
2734                 .driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B},
2735         {USB_DEVICE(ELSA_VID,   ELSA_PID_PREFIRM),
2736                 .driver_info = ADI930 | PREFIRM},
2737         {USB_DEVICE(ELSA_VID,   ELSA_PID_PSTFIRM),
2738                 .driver_info = ADI930 | PSTFIRM},
2739         {USB_DEVICE(ELSA_VID,   ELSA_PID_A_PREFIRM),
2740                 .driver_info = ADI930 | PREFIRM},
2741         {USB_DEVICE(ELSA_VID,   ELSA_PID_A_PSTFIRM),
2742                 .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A},
2743         {USB_DEVICE(ELSA_VID,   ELSA_PID_B_PREFIRM),
2744                 .driver_info = ADI930 | PREFIRM},
2745         {USB_DEVICE(ELSA_VID,   ELSA_PID_B_PSTFIRM),
2746                 .driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B},
2747         {USB_DEVICE(USR_VID,    MILLER_A_PID_PREFIRM),
2748                 .driver_info = EAGLE_I | PREFIRM},
2749         {USB_DEVICE(USR_VID,    MILLER_A_PID_PSTFIRM),
2750                 .driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_A},
2751         {USB_DEVICE(USR_VID,    MILLER_B_PID_PREFIRM),
2752                 .driver_info = EAGLE_I | PREFIRM},
2753         {USB_DEVICE(USR_VID,    MILLER_B_PID_PSTFIRM),
2754                 .driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_B},
2755         {USB_DEVICE(USR_VID,    HEINEKEN_A_PID_PREFIRM),
2756                 .driver_info = EAGLE_I | PREFIRM},
2757         {USB_DEVICE(USR_VID,    HEINEKEN_A_PID_PSTFIRM),
2758                 .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
2759         {USB_DEVICE(USR_VID,    HEINEKEN_B_PID_PREFIRM),
2760                 .driver_info = EAGLE_I | PREFIRM},
2761         {USB_DEVICE(USR_VID,    HEINEKEN_B_PID_PSTFIRM),
2762                 .driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
2763         {}
2764 };
2765
2766 /*
2767  * USB driver descriptor
2768  */
2769 static struct usb_driver uea_driver = {
2770         .name = "ueagle-atm",
2771         .id_table = uea_ids,
2772         .probe = uea_probe,
2773         .disconnect = uea_disconnect,
2774 };
2775
2776 MODULE_DEVICE_TABLE(usb, uea_ids);
2777
2778 module_usb_driver(uea_driver);
2779
2780 MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka");
2781 MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver");
2782 MODULE_LICENSE("Dual BSD/GPL");
2783 /*(DEBLOBBED)*/