GNU Linux-libre 6.9.1-gnu
[releases.git] / drivers / ufs / host / ufshcd-dwc.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * UFS Host driver for Synopsys Designware Core
4  *
5  * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
6  *
7  * Authors: Joao Pinto <jpinto@synopsys.com>
8  */
9
10 #include <linux/module.h>
11
12 #include <ufs/ufshcd.h>
13 #include <ufs/unipro.h>
14
15 #include "ufshcd-dwc.h"
16 #include "ufshci-dwc.h"
17
18 int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
19                                 const struct ufshcd_dme_attr_val *v, int n)
20 {
21         int ret = 0;
22         int attr_node = 0;
23
24         for (attr_node = 0; attr_node < n; attr_node++) {
25                 ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel,
26                         ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer);
27
28                 if (ret)
29                         return ret;
30         }
31
32         return 0;
33 }
34 EXPORT_SYMBOL(ufshcd_dwc_dme_set_attrs);
35
36 /**
37  * ufshcd_dwc_program_clk_div() - program clock divider.
38  * @hba: Private Structure pointer
39  * @divider_val: clock divider value to be programmed
40  *
41  */
42 static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
43 {
44         ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
45 }
46
47 /**
48  * ufshcd_dwc_link_is_up() - check if link is up.
49  * @hba: private structure pointer
50  *
51  * Return: 0 on success, non-zero value on failure.
52  */
53 static int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
54 {
55         int dme_result = 0;
56
57         ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result);
58
59         if (dme_result == UFSHCD_LINK_IS_UP) {
60                 ufshcd_set_link_active(hba);
61                 return 0;
62         }
63
64         return 1;
65 }
66
67 /**
68  * ufshcd_dwc_connection_setup() - configure unipro attributes.
69  * @hba: pointer to drivers private data
70  *
71  * This function configures both the local side (host) and the peer side
72  * (device) unipro attributes to establish the connection to application/
73  * cport.
74  * This function is not required if the hardware is properly configured to
75  * have this connection setup on reset. But invoking this function does no
76  * harm and should be fine even working with any ufs device.
77  *
78  * Return: 0 on success non-zero value on failure.
79  */
80 static int ufshcd_dwc_connection_setup(struct ufs_hba *hba)
81 {
82         static const struct ufshcd_dme_attr_val setup_attrs[] = {
83                 { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL },
84                 { UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL },
85                 { UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL },
86                 { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL },
87                 { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL },
88                 { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL },
89                 { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL },
90                 { UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL },
91                 { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL },
92                 { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER },
93                 { UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER },
94                 { UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER },
95                 { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER },
96                 { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER },
97                 { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER },
98                 { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER },
99                 { UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER },
100                 { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER }
101         };
102
103         return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
104 }
105
106 /**
107  * ufshcd_dwc_link_startup_notify() - program clock divider.
108  * @hba: private structure pointer
109  * @status: Callback notify status
110  *
111  * Return: 0 on success, non-zero value on failure.
112  */
113 int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
114                                         enum ufs_notify_change_status status)
115 {
116         int err = 0;
117
118         if (status == PRE_CHANGE) {
119                 ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125);
120
121                 err = ufshcd_vops_phy_initialization(hba);
122                 if (err) {
123                         dev_err(hba->dev, "Phy setup failed (%d)\n", err);
124                         goto out;
125                 }
126         } else { /* POST_CHANGE */
127                 err = ufshcd_dwc_link_is_up(hba);
128                 if (err) {
129                         dev_err(hba->dev, "Link is not up\n");
130                         goto out;
131                 }
132
133                 err = ufshcd_dwc_connection_setup(hba);
134                 if (err)
135                         dev_err(hba->dev, "Connection setup failed (%d)\n",
136                                                                         err);
137         }
138
139 out:
140         return err;
141 }
142 EXPORT_SYMBOL(ufshcd_dwc_link_startup_notify);
143
144 MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
145 MODULE_DESCRIPTION("UFS Host driver for Synopsys Designware Core");
146 MODULE_LICENSE("Dual BSD/GPL");