drivers/tty/serial/clps711x.c

   1 /*
   2  *  Driver for CLPS711x serial ports
   3  *
   4  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   5  *
   6  *  Copyright 1999 ARM Limited
   7  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  */
  14
  15 #if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  16 #define SUPPORT_SYSRQ
  17 #endif
  18
  19 #include <linux/module.h>
  20 #include <linux/device.h>
  21 #include <linux/console.h>
  22 #include <linux/serial_core.h>
  23 #include <linux/serial.h>
  24 #include <linux/clk.h>
  25 #include <linux/io.h>
  26 #include <linux/tty.h>
  27 #include <linux/tty_flip.h>
  28 #include <linux/ioport.h>
  29 #include <linux/of.h>
  30 #include <linux/platform_device.h>
  31 #include <linux/regmap.h>
  32
  33 #include <linux/mfd/syscon.h>
  34 #include <linux/mfd/syscon/clps711x.h>
  35
  36 #include "serial_mctrl_gpio.h"
  37
  38 #define UART_CLPS711X_DEVNAME   "ttyCL"
  39 #define UART_CLPS711X_NR        2
  40 #define UART_CLPS711X_MAJOR     204
  41 #define UART_CLPS711X_MINOR     40
  42
  43 #define UARTDR_OFFSET           (0x00)
  44 #define UBRLCR_OFFSET           (0x40)
  45
  46 #define UARTDR_FRMERR           (1 << 8)
  47 #define UARTDR_PARERR           (1 << 9)
  48 #define UARTDR_OVERR            (1 << 10)
  49
  50 #define UBRLCR_BAUD_MASK        ((1 << 12) - 1)
  51 #define UBRLCR_BREAK            (1 << 12)
  52 #define UBRLCR_PRTEN            (1 << 13)
  53 #define UBRLCR_EVENPRT          (1 << 14)
  54 #define UBRLCR_XSTOP            (1 << 15)
  55 #define UBRLCR_FIFOEN           (1 << 16)
  56 #define UBRLCR_WRDLEN5          (0 << 17)
  57 #define UBRLCR_WRDLEN6          (1 << 17)
  58 #define UBRLCR_WRDLEN7          (2 << 17)
  59 #define UBRLCR_WRDLEN8          (3 << 17)
  60 #define UBRLCR_WRDLEN_MASK      (3 << 17)
  61
  62 struct clps711x_port {
  63         struct uart_port        port;
  64         unsigned int            tx_enabled;
  65         int                     rx_irq;
  66         struct regmap           *syscon;
  67         struct mctrl_gpios      *gpios;
  68 };
  69
  70 static struct uart_driver clps711x_uart = {
  71         .owner          = THIS_MODULE,
  72         .driver_name    = UART_CLPS711X_DEVNAME,
  73         .dev_name       = UART_CLPS711X_DEVNAME,
  74         .major          = UART_CLPS711X_MAJOR,
  75         .minor          = UART_CLPS711X_MINOR,
  76         .nr             = UART_CLPS711X_NR,
  77 };
  78
  79 static void uart_clps711x_stop_tx(struct uart_port *port)
  80 {
  81         struct clps711x_port *s = dev_get_drvdata(port->dev);
  82
  83         if (s->tx_enabled) {
  84                 disable_irq(port->irq);
  85                 s->tx_enabled = 0;
  86         }
  87 }
  88
  89 static void uart_clps711x_start_tx(struct uart_port *port)
  90 {
  91         struct clps711x_port *s = dev_get_drvdata(port->dev);
  92
  93         if (!s->tx_enabled) {
  94                 s->tx_enabled = 1;
  95                 enable_irq(port->irq);
  96         }
  97 }
  98
  99 static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
 100 {
 101         struct uart_port *port = dev_id;
 102         struct clps711x_port *s = dev_get_drvdata(port->dev);
 103         unsigned int status, flg;
 104         u16 ch;
 105
 106         for (;;) {
 107                 u32 sysflg = 0;
 108
 109                 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 110                 if (sysflg & SYSFLG_URXFE)
 111                         break;
 112
 113                 ch = readw(port->membase + UARTDR_OFFSET);
 114                 status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR);
 115                 ch &= 0xff;
 116
 117                 port->icount.rx++;
 118                 flg = TTY_NORMAL;
 119
 120                 if (unlikely(status)) {
 121                         if (status & UARTDR_PARERR)
 122                                 port->icount.parity++;
 123                         else if (status & UARTDR_FRMERR)
 124                                 port->icount.frame++;
 125                         else if (status & UARTDR_OVERR)
 126                                 port->icount.overrun++;
 127
 128                         status &= port->read_status_mask;
 129
 130                         if (status & UARTDR_PARERR)
 131                                 flg = TTY_PARITY;
 132                         else if (status & UARTDR_FRMERR)
 133                                 flg = TTY_FRAME;
 134                         else if (status & UARTDR_OVERR)
 135                                 flg = TTY_OVERRUN;
 136                 }
 137
 138                 if (uart_handle_sysrq_char(port, ch))
 139                         continue;
 140
 141                 if (status & port->ignore_status_mask)
 142                         continue;
 143
 144                 uart_insert_char(port, status, UARTDR_OVERR, ch, flg);
 145         }
 146
 147         tty_flip_buffer_push(&port->state->port);
 148
 149         return IRQ_HANDLED;
 150 }
 151
 152 static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
 153 {
 154         struct uart_port *port = dev_id;
 155         struct clps711x_port *s = dev_get_drvdata(port->dev);
 156         struct circ_buf *xmit = &port->state->xmit;
 157
 158         if (port->x_char) {
 159                 writew(port->x_char, port->membase + UARTDR_OFFSET);
 160                 port->icount.tx++;
 161                 port->x_char = 0;
 162                 return IRQ_HANDLED;
 163         }
 164
 165         if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 166                 if (s->tx_enabled) {
 167                         disable_irq_nosync(port->irq);
 168                         s->tx_enabled = 0;
 169                 }
 170                 return IRQ_HANDLED;
 171         }
 172
 173         while (!uart_circ_empty(xmit)) {
 174                 u32 sysflg = 0;
 175
 176                 writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET);
 177                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 178                 port->icount.tx++;
 179
 180                 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 181                 if (sysflg & SYSFLG_UTXFF)
 182                         break;
 183         }
 184
 185         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 186                 uart_write_wakeup(port);
 187
 188         return IRQ_HANDLED;
 189 }
 190
 191 static unsigned int uart_clps711x_tx_empty(struct uart_port *port)
 192 {
 193         struct clps711x_port *s = dev_get_drvdata(port->dev);
 194         u32 sysflg = 0;
 195
 196         regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 197
 198         return (sysflg & SYSFLG_UBUSY) ? 0 : TIOCSER_TEMT;
 199 }
 200
 201 static unsigned int uart_clps711x_get_mctrl(struct uart_port *port)
 202 {
 203         unsigned int result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
 204         struct clps711x_port *s = dev_get_drvdata(port->dev);
 205
 206         return mctrl_gpio_get(s->gpios, &result);
 207 }
 208
 209 static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl)
 210 {
 211         struct clps711x_port *s = dev_get_drvdata(port->dev);
 212
 213         mctrl_gpio_set(s->gpios, mctrl);
 214 }
 215
 216 static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
 217 {
 218         unsigned int ubrlcr;
 219
 220         ubrlcr = readl(port->membase + UBRLCR_OFFSET);
 221         if (break_state)
 222                 ubrlcr |= UBRLCR_BREAK;
 223         else
 224                 ubrlcr &= ~UBRLCR_BREAK;
 225         writel(ubrlcr, port->membase + UBRLCR_OFFSET);
 226 }
 227
 228 static void uart_clps711x_set_ldisc(struct uart_port *port,
 229                                     struct ktermios *termios)
 230 {
 231         if (!port->line) {
 232                 struct clps711x_port *s = dev_get_drvdata(port->dev);
 233
 234                 regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON1_SIREN,
 235                                    (termios->c_line == N_IRDA) ? SYSCON1_SIREN : 0);
 236         }
 237 }
 238
 239 static int uart_clps711x_startup(struct uart_port *port)
 240 {
 241         struct clps711x_port *s = dev_get_drvdata(port->dev);
 242
 243         /* Disable break */
 244         writel(readl(port->membase + UBRLCR_OFFSET) & ~UBRLCR_BREAK,
 245                port->membase + UBRLCR_OFFSET);
 246
 247         /* Enable the port */
 248         return regmap_update_bits(s->syscon, SYSCON_OFFSET,
 249                                   SYSCON_UARTEN, SYSCON_UARTEN);
 250 }
 251
 252 static void uart_clps711x_shutdown(struct uart_port *port)
 253 {
 254         struct clps711x_port *s = dev_get_drvdata(port->dev);
 255
 256         /* Disable the port */
 257         regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
 258 }
 259
 260 static void uart_clps711x_set_termios(struct uart_port *port,
 261                                       struct ktermios *termios,
 262                                       struct ktermios *old)
 263 {
 264         u32 ubrlcr;
 265         unsigned int baud, quot;
 266
 267         /* Mask termios capabilities we don't support */
 268         termios->c_cflag &= ~CMSPAR;
 269         termios->c_iflag &= ~(BRKINT | IGNBRK);
 270
 271         /* Ask the core to calculate the divisor for us */
 272         baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096,
 273                                                       port->uartclk / 16);
 274         quot = uart_get_divisor(port, baud);
 275
 276         switch (termios->c_cflag & CSIZE) {
 277         case CS5:
 278                 ubrlcr = UBRLCR_WRDLEN5;
 279                 break;
 280         case CS6:
 281                 ubrlcr = UBRLCR_WRDLEN6;
 282                 break;
 283         case CS7:
 284                 ubrlcr = UBRLCR_WRDLEN7;
 285                 break;
 286         case CS8:
 287         default:
 288                 ubrlcr = UBRLCR_WRDLEN8;
 289                 break;
 290         }
 291
 292         if (termios->c_cflag & CSTOPB)
 293                 ubrlcr |= UBRLCR_XSTOP;
 294
 295         if (termios->c_cflag & PARENB) {
 296                 ubrlcr |= UBRLCR_PRTEN;
 297                 if (!(termios->c_cflag & PARODD))
 298                         ubrlcr |= UBRLCR_EVENPRT;
 299         }
 300
 301         /* Enable FIFO */
 302         ubrlcr |= UBRLCR_FIFOEN;
 303
 304         /* Set read status mask */
 305         port->read_status_mask = UARTDR_OVERR;
 306         if (termios->c_iflag & INPCK)
 307                 port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR;
 308
 309         /* Set status ignore mask */
 310         port->ignore_status_mask = 0;
 311         if (!(termios->c_cflag & CREAD))
 312                 port->ignore_status_mask |= UARTDR_OVERR | UARTDR_PARERR |
 313                                             UARTDR_FRMERR;
 314
 315         uart_update_timeout(port, termios->c_cflag, baud);
 316
 317         writel(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET);
 318 }
 319
 320 static const char *uart_clps711x_type(struct uart_port *port)
 321 {
 322         return (port->type == PORT_CLPS711X) ? "CLPS711X" : NULL;
 323 }
 324
 325 static void uart_clps711x_config_port(struct uart_port *port, int flags)
 326 {
 327         if (flags & UART_CONFIG_TYPE)
 328                 port->type = PORT_CLPS711X;
 329 }
 330
 331 static void uart_clps711x_nop_void(struct uart_port *port)
 332 {
 333 }
 334
 335 static int uart_clps711x_nop_int(struct uart_port *port)
 336 {
 337         return 0;
 338 }
 339
 340 static const struct uart_ops uart_clps711x_ops = {
 341         .tx_empty       = uart_clps711x_tx_empty,
 342         .set_mctrl      = uart_clps711x_set_mctrl,
 343         .get_mctrl      = uart_clps711x_get_mctrl,
 344         .stop_tx        = uart_clps711x_stop_tx,
 345         .start_tx       = uart_clps711x_start_tx,
 346         .stop_rx        = uart_clps711x_nop_void,
 347         .break_ctl      = uart_clps711x_break_ctl,
 348         .set_ldisc      = uart_clps711x_set_ldisc,
 349         .startup        = uart_clps711x_startup,
 350         .shutdown       = uart_clps711x_shutdown,
 351         .set_termios    = uart_clps711x_set_termios,
 352         .type           = uart_clps711x_type,
 353         .config_port    = uart_clps711x_config_port,
 354         .release_port   = uart_clps711x_nop_void,
 355         .request_port   = uart_clps711x_nop_int,
 356 };
 357
 358 #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
 359 static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
 360 {
 361         struct clps711x_port *s = dev_get_drvdata(port->dev);
 362         u32 sysflg = 0;
 363
 364         /* Wait for FIFO is not full */
 365         do {
 366                 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 367         } while (sysflg & SYSFLG_UTXFF);
 368
 369         writew(ch, port->membase + UARTDR_OFFSET);
 370 }
 371
 372 static void uart_clps711x_console_write(struct console *co, const char *c,
 373                                         unsigned n)
 374 {
 375         struct uart_port *port = clps711x_uart.state[co->index].uart_port;
 376         struct clps711x_port *s = dev_get_drvdata(port->dev);
 377         u32 sysflg = 0;
 378
 379         uart_console_write(port, c, n, uart_clps711x_console_putchar);
 380
 381         /* Wait for transmitter to become empty */
 382         do {
 383                 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 384         } while (sysflg & SYSFLG_UBUSY);
 385 }
 386
 387 static int uart_clps711x_console_setup(struct console *co, char *options)
 388 {
 389         int baud = 38400, bits = 8, parity = 'n', flow = 'n';
 390         int ret, index = co->index;
 391         struct clps711x_port *s;
 392         struct uart_port *port;
 393         unsigned int quot;
 394         u32 ubrlcr;
 395
 396         if (index < 0 || index >= UART_CLPS711X_NR)
 397                 return -EINVAL;
 398
 399         port = clps711x_uart.state[index].uart_port;
 400         if (!port)
 401                 return -ENODEV;
 402
 403         s = dev_get_drvdata(port->dev);
 404
 405         if (!options) {
 406                 u32 syscon = 0;
 407
 408                 regmap_read(s->syscon, SYSCON_OFFSET, &syscon);
 409                 if (syscon & SYSCON_UARTEN) {
 410                         ubrlcr = readl(port->membase + UBRLCR_OFFSET);
 411
 412                         if (ubrlcr & UBRLCR_PRTEN) {
 413                                 if (ubrlcr & UBRLCR_EVENPRT)
 414                                         parity = 'e';
 415                                 else
 416                                         parity = 'o';
 417                         }
 418
 419                         if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
 420                                 bits = 7;
 421
 422                         quot = ubrlcr & UBRLCR_BAUD_MASK;
 423                         baud = port->uartclk / (16 * (quot + 1));
 424                 }
 425         } else
 426                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 427
 428         ret = uart_set_options(port, co, baud, parity, bits, flow);
 429         if (ret)
 430                 return ret;
 431
 432         return regmap_update_bits(s->syscon, SYSCON_OFFSET,
 433                                   SYSCON_UARTEN, SYSCON_UARTEN);
 434 }
 435
 436 static struct console clps711x_console = {
 437         .name   = UART_CLPS711X_DEVNAME,
 438         .device = uart_console_device,
 439         .write  = uart_clps711x_console_write,
 440         .setup  = uart_clps711x_console_setup,
 441         .flags  = CON_PRINTBUFFER,
 442         .index  = -1,
 443 };
 444 #endif
 445
 446 static int uart_clps711x_probe(struct platform_device *pdev)
 447 {
 448         struct device_node *np = pdev->dev.of_node;
 449         int ret, index = np ? of_alias_get_id(np, "serial") : pdev->id;
 450         struct clps711x_port *s;
 451         struct resource *res;
 452         struct clk *uart_clk;
 453         int irq;
 454
 455         if (index < 0 || index >= UART_CLPS711X_NR)
 456                 return -EINVAL;
 457
 458         s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
 459         if (!s)
 460                 return -ENOMEM;
 461
 462         uart_clk = devm_clk_get(&pdev->dev, NULL);
 463         if (IS_ERR(uart_clk))
 464                 return PTR_ERR(uart_clk);
 465
 466         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 467         s->port.membase = devm_ioremap_resource(&pdev->dev, res);
 468         if (IS_ERR(s->port.membase))
 469                 return PTR_ERR(s->port.membase);
 470
 471         irq = platform_get_irq(pdev, 0);
 472         if (irq < 0)
 473                 return irq;
 474         s->port.irq = irq;
 475
 476         s->rx_irq = platform_get_irq(pdev, 1);
 477         if (s->rx_irq < 0)
 478                 return s->rx_irq;
 479
 480         if (!np) {
 481                 char syscon_name[9];
 482
 483                 sprintf(syscon_name, "syscon.%i", index + 1);
 484                 s->syscon = syscon_regmap_lookup_by_pdevname(syscon_name);
 485                 if (IS_ERR(s->syscon))
 486                         return PTR_ERR(s->syscon);
 487         } else {
 488                 s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
 489                 if (IS_ERR(s->syscon))
 490                         return PTR_ERR(s->syscon);
 491         }
 492
 493         s->port.line            = index;
 494         s->port.dev             = &pdev->dev;
 495         s->port.iotype          = UPIO_MEM32;
 496         s->port.mapbase         = res->start;
 497         s->port.type            = PORT_CLPS711X;
 498         s->port.fifosize        = 16;
 499         s->port.flags           = UPF_SKIP_TEST | UPF_FIXED_TYPE;
 500         s->port.uartclk         = clk_get_rate(uart_clk);
 501         s->port.ops             = &uart_clps711x_ops;
 502
 503         platform_set_drvdata(pdev, s);
 504
 505         s->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0);
 506         if (IS_ERR(s->gpios))
 507             return PTR_ERR(s->gpios);
 508
 509         ret = uart_add_one_port(&clps711x_uart, &s->port);
 510         if (ret)
 511                 return ret;
 512
 513         /* Disable port */
 514         if (!uart_console(&s->port))
 515                 regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
 516
 517         s->tx_enabled = 1;
 518
 519         ret = devm_request_irq(&pdev->dev, s->port.irq, uart_clps711x_int_tx, 0,
 520                                dev_name(&pdev->dev), &s->port);
 521         if (ret) {
 522                 uart_remove_one_port(&clps711x_uart, &s->port);
 523                 return ret;
 524         }
 525
 526         ret = devm_request_irq(&pdev->dev, s->rx_irq, uart_clps711x_int_rx, 0,
 527                                dev_name(&pdev->dev), &s->port);
 528         if (ret)
 529                 uart_remove_one_port(&clps711x_uart, &s->port);
 530
 531         return ret;
 532 }
 533
 534 static int uart_clps711x_remove(struct platform_device *pdev)
 535 {
 536         struct clps711x_port *s = platform_get_drvdata(pdev);
 537
 538         return uart_remove_one_port(&clps711x_uart, &s->port);
 539 }
 540
 541 static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = {
 542         { .compatible = "cirrus,ep7209-uart", },
 543         { }
 544 };
 545 MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids);
 546
 547 static struct platform_driver clps711x_uart_platform = {
 548         .driver = {
 549                 .name           = "clps711x-uart",
 550                 .of_match_table = of_match_ptr(clps711x_uart_dt_ids),
 551         },
 552         .probe  = uart_clps711x_probe,
 553         .remove = uart_clps711x_remove,
 554 };
 555
 556 static int __init uart_clps711x_init(void)
 557 {
 558         int ret;
 559
 560 #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
 561         clps711x_uart.cons = &clps711x_console;
 562         clps711x_console.data = &clps711x_uart;
 563 #endif
 564
 565         ret = uart_register_driver(&clps711x_uart);
 566         if (ret)
 567                 return ret;
 568
 569         return platform_driver_register(&clps711x_uart_platform);
 570 }
 571 module_init(uart_clps711x_init);
 572
 573 static void __exit uart_clps711x_exit(void)
 574 {
 575         platform_driver_unregister(&clps711x_uart_platform);
 576         uart_unregister_driver(&clps711x_uart);
 577 }
 578 module_exit(uart_clps711x_exit);
 579
 580 MODULE_AUTHOR("Deep Blue Solutions Ltd");
 581 MODULE_DESCRIPTION("CLPS711X serial driver");
 582 MODULE_LICENSE("GPL");