1 /*======================================================================
3 A driver for PCMCIA serial devices
5 serial_cs.c 1.134 2002/05/04 05:48:53
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
32 ======================================================================*/
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/kernel.h>
37 #include <linux/ptrace.h>
38 #include <linux/slab.h>
39 #include <linux/string.h>
40 #include <linux/timer.h>
41 #include <linux/serial_core.h>
42 #include <linux/delay.h>
43 #include <linux/major.h>
46 #include <pcmcia/cistpl.h>
47 #include <pcmcia/ciscode.h>
48 #include <pcmcia/ds.h>
49 #include <pcmcia/cisreg.h>
54 /*====================================================================*/
56 /* Parameters that can be set with 'insmod' */
58 /* Enable the speaker? */
59 static int do_sound = 1;
60 /* Skip strict UART tests? */
61 static int buggy_uart;
63 module_param(do_sound, int, 0444);
64 module_param(buggy_uart, int, 0444);
66 /*====================================================================*/
68 /* Table of multi-port card ID's */
73 int multi; /* 1 = multifunction, > 1 = # ports */
74 void (*config)(struct pcmcia_device *);
75 void (*setup)(struct pcmcia_device *, struct uart_8250_port *);
76 void (*wakeup)(struct pcmcia_device *);
77 int (*post)(struct pcmcia_device *);
81 struct pcmcia_device *p_dev;
89 const struct serial_quirk *quirk;
92 struct serial_cfg_mem {
99 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
100 * manfid 0x0160, 0x0104
101 * This card appears to have a 14.7456MHz clock.
103 /* Generic Modem: MD55x (GPRS/EDGE) have
104 * Elan VPU16551 UART with 14.7456MHz oscillator
105 * manfid 0x015D, 0x4C45
107 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart)
109 uart->port.uartclk = 14745600;
112 static int quirk_post_ibm(struct pcmcia_device *link)
117 ret = pcmcia_read_config_byte(link, 0x800, &val);
121 ret = pcmcia_write_config_byte(link, 0x800, val | 1);
131 * Nokia cards are not really multiport cards. Shouldn't this
132 * be handled by setting the quirk entry .multi = 0 | 1 ?
134 static void quirk_config_nokia(struct pcmcia_device *link)
136 struct serial_info *info = link->priv;
142 static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
144 struct serial_info *info = link->priv;
147 outb(12, info->c950ctrl + 1);
150 /* request_region? oxsemi branch does no request_region too... */
152 * This sequence is needed to properly initialize MC45 attached to OXCF950.
153 * I tried decreasing these msleep()s, but it worked properly (survived
154 * 1000 stop/start operations) with these timeouts (or bigger).
156 static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
158 struct serial_info *info = link->priv;
159 unsigned int ctrl = info->c950ctrl;
177 * Socket Dual IO: this enables irq's for second port
179 static void quirk_config_socket(struct pcmcia_device *link)
181 struct serial_info *info = link->priv;
184 link->config_flags |= CONF_ENABLE_ESR;
187 static const struct serial_quirk quirks[] = {
192 .setup = quirk_setup_brainboxes_0104,
197 .setup = quirk_setup_brainboxes_0104,
199 .manfid = MANFID_IBM,
202 .post = quirk_post_ibm,
204 .manfid = MANFID_INTEL,
205 .prodid = PRODID_INTEL_DUAL_RS232,
208 .manfid = MANFID_NATINST,
209 .prodid = PRODID_NATINST_QUAD_RS232,
212 .manfid = MANFID_NOKIA,
215 .config = quirk_config_nokia,
217 .manfid = MANFID_OMEGA,
218 .prodid = PRODID_OMEGA_QSP_100,
221 .manfid = MANFID_OXSEMI,
224 .wakeup = quirk_wakeup_oxsemi,
226 .manfid = MANFID_POSSIO,
227 .prodid = PRODID_POSSIO_GCC,
229 .wakeup = quirk_wakeup_possio_gcc,
231 .manfid = MANFID_QUATECH,
232 .prodid = PRODID_QUATECH_DUAL_RS232,
235 .manfid = MANFID_QUATECH,
236 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
239 .manfid = MANFID_QUATECH,
240 .prodid = PRODID_QUATECH_DUAL_RS232_G,
243 .manfid = MANFID_QUATECH,
244 .prodid = PRODID_QUATECH_QUAD_RS232,
247 .manfid = MANFID_SOCKET,
248 .prodid = PRODID_SOCKET_DUAL_RS232,
250 .config = quirk_config_socket,
252 .manfid = MANFID_SOCKET,
255 .config = quirk_config_socket,
260 static int serial_config(struct pcmcia_device * link);
263 static void serial_remove(struct pcmcia_device *link)
265 struct serial_info *info = link->priv;
268 dev_dbg(&link->dev, "serial_release\n");
271 * Recheck to see if the device is still configured.
273 for (i = 0; i < info->ndev; i++)
274 serial8250_unregister_port(info->line[i]);
277 pcmcia_disable_device(link);
280 static int serial_suspend(struct pcmcia_device *link)
282 struct serial_info *info = link->priv;
285 for (i = 0; i < info->ndev; i++)
286 serial8250_suspend_port(info->line[i]);
291 static int serial_resume(struct pcmcia_device *link)
293 struct serial_info *info = link->priv;
296 for (i = 0; i < info->ndev; i++)
297 serial8250_resume_port(info->line[i]);
299 if (info->quirk && info->quirk->wakeup)
300 info->quirk->wakeup(link);
305 static int serial_probe(struct pcmcia_device *link)
307 struct serial_info *info;
310 dev_dbg(&link->dev, "serial_attach()\n");
312 /* Create new serial device */
313 info = kzalloc(sizeof (*info), GFP_KERNEL);
319 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
321 link->config_flags |= CONF_ENABLE_SPKR;
323 ret = serial_config(link);
334 static void serial_detach(struct pcmcia_device *link)
336 struct serial_info *info = link->priv;
338 dev_dbg(&link->dev, "serial_detach\n");
341 * Ensure that the ports have been released.
349 /*====================================================================*/
351 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
352 unsigned int iobase, int irq)
354 struct uart_8250_port uart;
357 memset(&uart, 0, sizeof(uart));
358 uart.port.iobase = iobase;
360 uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
361 uart.port.uartclk = 1843200;
362 uart.port.dev = &handle->dev;
364 uart.port.flags |= UPF_BUGGY_UART;
366 if (info->quirk && info->quirk->setup)
367 info->quirk->setup(handle, &uart);
369 line = serial8250_register_8250_port(&uart);
371 pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n",
372 (unsigned long)iobase, irq);
376 info->line[info->ndev] = line;
382 /*====================================================================*/
384 static int pfc_config(struct pcmcia_device *p_dev)
386 unsigned int port = 0;
387 struct serial_info *info = p_dev->priv;
389 if ((p_dev->resource[1]->end != 0) &&
390 (resource_size(p_dev->resource[1]) == 8)) {
391 port = p_dev->resource[1]->start;
393 } else if ((info->manfid == MANFID_OSITECH) &&
394 (resource_size(p_dev->resource[0]) == 0x40)) {
395 port = p_dev->resource[0]->start + 0x28;
399 return setup_serial(p_dev, info, port, p_dev->irq);
401 dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
405 static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
407 static const int size_table[2] = { 8, 16 };
408 int *try = priv_data;
410 if (p_dev->resource[0]->start == 0)
413 if ((*try & 0x1) == 0)
414 p_dev->io_lines = 16;
416 if (p_dev->resource[0]->end != size_table[(*try >> 1)])
419 p_dev->resource[0]->end = 8;
420 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
421 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
423 return pcmcia_request_io(p_dev);
426 static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
429 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
432 if (p_dev->io_lines > 3)
435 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
436 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
437 p_dev->resource[0]->end = 8;
439 for (j = 0; j < 5; j++) {
440 p_dev->resource[0]->start = base[j];
441 p_dev->io_lines = base[j] ? 16 : 3;
442 if (!pcmcia_request_io(p_dev))
448 static int simple_config(struct pcmcia_device *link)
450 struct serial_info *info = link->priv;
451 int i = -ENODEV, try;
453 /* First pass: look for a config entry that looks normal.
454 * Two tries: without IO aliases, then with aliases */
455 link->config_flags |= CONF_AUTO_SET_VPP;
456 for (try = 0; try < 4; try++)
457 if (!pcmcia_loop_config(link, simple_config_check, &try))
460 /* Second pass: try to find an entry that isn't picky about
461 its base address, then try to grab any standard serial port
462 address, and finally try to get any free port. */
463 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
466 dev_warn(&link->dev, "no usable port range found, giving up\n");
470 if (info->multi && (info->manfid == MANFID_3COM))
471 link->config_index &= ~(0x08);
474 * Apply any configuration quirks.
476 if (info->quirk && info->quirk->config)
477 info->quirk->config(link);
479 i = pcmcia_enable_device(link);
482 return setup_serial(link, info, link->resource[0]->start, link->irq);
485 static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
487 int *multi = priv_data;
489 if (p_dev->resource[1]->end)
492 /* The quad port cards have bad CIS's, so just look for a
493 window larger than 8 ports and assume it will be right */
494 if (p_dev->resource[0]->end <= 8)
497 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
498 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
499 p_dev->resource[0]->end = *multi * 8;
501 if (pcmcia_request_io(p_dev))
506 static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
509 int *base2 = priv_data;
511 if (!p_dev->resource[0]->end || !p_dev->resource[1]->end ||
512 p_dev->resource[0]->start + 8 != p_dev->resource[1]->start)
515 p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
516 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
517 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
519 if (pcmcia_request_io(p_dev))
522 *base2 = p_dev->resource[0]->start + 8;
526 static int multi_config(struct pcmcia_device *link)
528 struct serial_info *info = link->priv;
531 /* First, look for a generic full-sized window */
532 if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
533 base2 = link->resource[0]->start + 8;
535 /* If that didn't work, look for two windows */
537 if (pcmcia_loop_config(link, multi_config_check_notpicky,
539 dev_warn(&link->dev, "no usable port range "
540 "found, giving up\n");
546 dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
549 * Apply any configuration quirks.
551 if (info->quirk && info->quirk->config)
552 info->quirk->config(link);
554 i = pcmcia_enable_device(link);
558 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
559 * 8 registers are for the UART, the others are extra registers.
560 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
562 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
563 info->prodid == PRODID_POSSIO_GCC)) {
566 if (link->config_index == 1 ||
567 link->config_index == 3) {
568 err = setup_serial(link, info, base2,
570 base2 = link->resource[0]->start;
572 err = setup_serial(link, info, link->resource[0]->start,
575 info->c950ctrl = base2;
578 * FIXME: We really should wake up the port prior to
579 * handing it over to the serial layer.
581 if (info->quirk && info->quirk->wakeup)
582 info->quirk->wakeup(link);
587 setup_serial(link, info, link->resource[0]->start, link->irq);
588 for (i = 0; i < info->multi - 1; i++)
589 setup_serial(link, info, base2 + (8 * i),
594 static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
596 struct serial_info *info = p_dev->priv;
598 if (!p_dev->resource[0]->end)
601 if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
602 info->multi = p_dev->resource[0]->end >> 3;
604 if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
605 && (p_dev->resource[1]->end == 8))
608 return 0; /* break */
612 static int serial_config(struct pcmcia_device * link)
614 struct serial_info *info = link->priv;
617 dev_dbg(&link->dev, "serial_config\n");
619 /* Is this a compliant multifunction card? */
620 info->multi = (link->socket->functions > 1);
622 /* Is this a multiport card? */
623 info->manfid = link->manf_id;
624 info->prodid = link->card_id;
626 for (i = 0; i < ARRAY_SIZE(quirks); i++)
627 if ((quirks[i].manfid == ~0 ||
628 quirks[i].manfid == info->manfid) &&
629 (quirks[i].prodid == ~0 ||
630 quirks[i].prodid == info->prodid)) {
631 info->quirk = &quirks[i];
635 /* Another check for dual-serial cards: look for either serial or
636 multifunction cards that ask for appropriate IO port ranges */
637 if ((info->multi == 0) &&
638 (link->has_func_id) &&
639 (link->socket->pcmcia_pfc == 0) &&
640 ((link->func_id == CISTPL_FUNCID_MULTI) ||
641 (link->func_id == CISTPL_FUNCID_SERIAL))) {
642 if (pcmcia_loop_config(link, serial_check_for_multi, info))
647 * Apply any multi-port quirk.
649 if (info->quirk && info->quirk->multi != -1)
650 info->multi = info->quirk->multi;
653 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
654 link->manf_id, link->card_id,
655 link->socket->pcmcia_pfc, info->multi, info->quirk);
656 if (link->socket->pcmcia_pfc)
657 i = pfc_config(link);
658 else if (info->multi > 1)
659 i = multi_config(link);
661 i = simple_config(link);
663 if (i || info->ndev == 0)
667 * Apply any post-init quirk. FIXME: This should really happen
668 * before we register the port, since it might already be in use.
670 if (info->quirk && info->quirk->post)
671 if (info->quirk->post(link))
677 dev_warn(&link->dev, "failed to initialize\n");
682 static const struct pcmcia_device_id serial_ids[] = {
683 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
684 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
685 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
686 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
687 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
688 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
689 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
690 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
691 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
692 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
693 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
694 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
695 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
696 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
697 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
698 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
699 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
700 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
701 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
702 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
703 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
704 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
705 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
706 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
707 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
708 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
709 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
710 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
711 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
712 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
713 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
714 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
715 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
716 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
717 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
718 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
719 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
720 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
721 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
722 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
723 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
724 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
725 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
726 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
727 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
728 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
729 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
730 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
731 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
732 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
733 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
734 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
735 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
736 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
737 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
738 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
739 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
740 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
741 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
742 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
743 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
744 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
745 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
746 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
747 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
748 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
749 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
750 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
751 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
752 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
753 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
754 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
755 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
756 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
757 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
758 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
759 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
760 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
761 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
762 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
763 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
764 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
765 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
766 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
767 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
768 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
769 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
770 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
771 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
772 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
773 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
774 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
775 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
776 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
777 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
778 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
779 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
780 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
781 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
782 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
783 PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa),
784 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
785 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
786 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
787 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
788 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
789 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
790 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
791 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
792 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
793 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
794 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
795 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
796 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
797 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
798 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
799 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
800 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
801 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
802 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
803 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
804 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
805 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
806 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
807 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
808 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
809 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
810 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
811 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
812 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
813 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
814 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
815 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
816 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
817 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
818 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
819 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
820 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
821 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
822 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
823 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
824 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
825 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
826 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
827 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
828 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
829 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
830 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
831 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
832 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
833 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
834 PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
835 PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
836 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
838 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
839 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
840 PCMCIA_DEVICE_FUNC_ID(2),
843 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
845 MODULE_FIRMWARE("cis/PCMLM28.cis");
846 MODULE_FIRMWARE("cis/DP83903.cis");
847 MODULE_FIRMWARE("cis/3CCFEM556.cis");
848 MODULE_FIRMWARE("cis/3CXEM556.cis");
849 MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
850 MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
851 MODULE_FIRMWARE("cis/SW_555_SER.cis");
852 MODULE_FIRMWARE("cis/MT5634ZLX.cis");
853 MODULE_FIRMWARE("cis/COMpad2.cis");
854 MODULE_FIRMWARE("cis/COMpad4.cis");
855 MODULE_FIRMWARE("cis/RS-COM-2P.cis");
857 static struct pcmcia_driver serial_cs_driver = {
858 .owner = THIS_MODULE,
860 .probe = serial_probe,
861 .remove = serial_detach,
862 .id_table = serial_ids,
863 .suspend = serial_suspend,
864 .resume = serial_resume,
866 module_pcmcia_driver(serial_cs_driver);
868 MODULE_LICENSE("GPL");