GNU Linux-libre 6.1.24-gnu
[releases.git] / drivers / thunderbolt / nhi_regs.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Thunderbolt driver - NHI registers
4  *
5  * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
6  * Copyright (C) 2018, Intel Corporation
7  */
8
9 #ifndef NHI_REGS_H_
10 #define NHI_REGS_H_
11
12 #include <linux/types.h>
13
14 enum ring_flags {
15         RING_FLAG_ISOCH_ENABLE = 1 << 27, /* TX only? */
16         RING_FLAG_E2E_FLOW_CONTROL = 1 << 28,
17         RING_FLAG_PCI_NO_SNOOP = 1 << 29,
18         RING_FLAG_RAW = 1 << 30, /* ignore EOF/SOF mask, include checksum */
19         RING_FLAG_ENABLE = 1 << 31,
20 };
21
22 /**
23  * struct ring_desc - TX/RX ring entry
24  *
25  * For TX set length/eof/sof.
26  * For RX length/eof/sof are set by the NHI.
27  */
28 struct ring_desc {
29         u64 phys;
30         u32 length:12;
31         u32 eof:4;
32         u32 sof:4;
33         enum ring_desc_flags flags:12;
34         u32 time; /* write zero */
35 } __packed;
36
37 /* NHI registers in bar 0 */
38
39 /*
40  * 16 bytes per entry, one entry for every hop (REG_HOP_COUNT)
41  * 00: physical pointer to an array of struct ring_desc
42  * 08: ring tail (set by NHI)
43  * 10: ring head (index of first non posted descriptor)
44  * 12: descriptor count
45  */
46 #define REG_TX_RING_BASE        0x00000
47
48 /*
49  * 16 bytes per entry, one entry for every hop (REG_HOP_COUNT)
50  * 00: physical pointer to an array of struct ring_desc
51  * 08: ring head (index of first not posted descriptor)
52  * 10: ring tail (set by NHI)
53  * 12: descriptor count
54  * 14: max frame sizes (anything larger than 0x100 has no effect)
55  */
56 #define REG_RX_RING_BASE        0x08000
57
58 /*
59  * 32 bytes per entry, one entry for every hop (REG_HOP_COUNT)
60  * 00: enum_ring_flags
61  * 04: isoch time stamp ?? (write 0)
62  * ..: unknown
63  */
64 #define REG_TX_OPTIONS_BASE     0x19800
65
66 /*
67  * 32 bytes per entry, one entry for every hop (REG_HOP_COUNT)
68  * 00: enum ring_flags
69  *     If RING_FLAG_E2E_FLOW_CONTROL is set then bits 13-23 must be set to
70  *     the corresponding TX hop id.
71  * 04: EOF/SOF mask (ignored for RING_FLAG_RAW rings)
72  * ..: unknown
73  */
74 #define REG_RX_OPTIONS_BASE     0x29800
75 #define REG_RX_OPTIONS_E2E_HOP_MASK     GENMASK(22, 12)
76 #define REG_RX_OPTIONS_E2E_HOP_SHIFT    12
77
78 /*
79  * three bitfields: tx, rx, rx overflow
80  * Every bitfield contains one bit for every hop (REG_HOP_COUNT).
81  * New interrupts are fired only after ALL registers have been
82  * read (even those containing only disabled rings).
83  */
84 #define REG_RING_NOTIFY_BASE    0x37800
85 #define RING_NOTIFY_REG_COUNT(nhi) ((31 + 3 * nhi->hop_count) / 32)
86 #define REG_RING_INT_CLEAR      0x37808
87
88 /*
89  * two bitfields: rx, tx
90  * Both bitfields contains one bit for every hop (REG_HOP_COUNT). To
91  * enable/disable interrupts set/clear the corresponding bits.
92  */
93 #define REG_RING_INTERRUPT_BASE 0x38200
94 #define RING_INTERRUPT_REG_COUNT(nhi) ((31 + 2 * nhi->hop_count) / 32)
95
96 #define REG_INT_THROTTLING_RATE 0x38c00
97
98 /* Interrupt Vector Allocation */
99 #define REG_INT_VEC_ALLOC_BASE  0x38c40
100 #define REG_INT_VEC_ALLOC_BITS  4
101 #define REG_INT_VEC_ALLOC_MASK  GENMASK(3, 0)
102 #define REG_INT_VEC_ALLOC_REGS  (32 / REG_INT_VEC_ALLOC_BITS)
103
104 /* The last 11 bits contain the number of hops supported by the NHI port. */
105 #define REG_HOP_COUNT           0x39640
106
107 #define REG_DMA_MISC                    0x39864
108 #define REG_DMA_MISC_INT_AUTO_CLEAR     BIT(2)
109 #define REG_DMA_MISC_DISABLE_AUTO_CLEAR BIT(17)
110
111 #define REG_INMAIL_DATA                 0x39900
112
113 #define REG_INMAIL_CMD                  0x39904
114 #define REG_INMAIL_CMD_MASK             GENMASK(7, 0)
115 #define REG_INMAIL_ERROR                BIT(30)
116 #define REG_INMAIL_OP_REQUEST           BIT(31)
117
118 #define REG_OUTMAIL_CMD                 0x3990c
119 #define REG_OUTMAIL_CMD_OPMODE_SHIFT    8
120 #define REG_OUTMAIL_CMD_OPMODE_MASK     GENMASK(11, 8)
121
122 #define REG_FW_STS                      0x39944
123 #define REG_FW_STS_NVM_AUTH_DONE        BIT(31)
124 #define REG_FW_STS_CIO_RESET_REQ        BIT(30)
125 #define REG_FW_STS_ICM_EN_CPU           BIT(2)
126 #define REG_FW_STS_ICM_EN_INVERT        BIT(1)
127 #define REG_FW_STS_ICM_EN               BIT(0)
128
129 /* ICL NHI VSEC registers */
130
131 /* FW ready */
132 #define VS_CAP_9                        0xc8
133 #define VS_CAP_9_FW_READY               BIT(31)
134 /* UUID */
135 #define VS_CAP_10                       0xcc
136 #define VS_CAP_11                       0xd0
137 /* LTR */
138 #define VS_CAP_15                       0xe0
139 #define VS_CAP_16                       0xe4
140 /* TBT2PCIe */
141 #define VS_CAP_18                       0xec
142 #define VS_CAP_18_DONE                  BIT(0)
143 /* PCIe2TBT */
144 #define VS_CAP_19                       0xf0
145 #define VS_CAP_19_VALID                 BIT(0)
146 #define VS_CAP_19_CMD_SHIFT             1
147 #define VS_CAP_19_CMD_MASK              GENMASK(7, 1)
148 /* Force power */
149 #define VS_CAP_22                       0xfc
150 #define VS_CAP_22_FORCE_POWER           BIT(1)
151 #define VS_CAP_22_DMA_DELAY_MASK        GENMASK(31, 24)
152 #define VS_CAP_22_DMA_DELAY_SHIFT       24
153
154 /**
155  * enum icl_lc_mailbox_cmd - ICL specific LC mailbox commands
156  * @ICL_LC_GO2SX: Ask LC to enter Sx without wake
157  * @ICL_LC_GO2SX_NO_WAKE: Ask LC to enter Sx with wake
158  * @ICL_LC_PREPARE_FOR_RESET: Prepare LC for reset
159  */
160 enum icl_lc_mailbox_cmd {
161         ICL_LC_GO2SX = 0x02,
162         ICL_LC_GO2SX_NO_WAKE = 0x03,
163         ICL_LC_PREPARE_FOR_RESET = 0x21,
164 };
165
166 #endif