GNU Linux-libre 6.8.7-gnu
[releases.git] / drivers / thermal / loongson2_thermal.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Author: zhanghongchen <zhanghongchen@loongson.cn>
4  *         Yinbo Zhu <zhuyinbo@loongson.cn>
5  * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
6  */
7
8 #include <linux/interrupt.h>
9 #include <linux/io.h>
10 #include <linux/minmax.h>
11 #include <linux/mod_devicetable.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/property.h>
15 #include <linux/thermal.h>
16 #include <linux/units.h>
17 #include "thermal_hwmon.h"
18
19 #define LOONGSON2_MAX_SENSOR_SEL_NUM                    3
20
21 #define LOONGSON2_THSENS_CTRL_HI_REG                    0x0
22 #define LOONGSON2_THSENS_CTRL_LOW_REG                   0x8
23 #define LOONGSON2_THSENS_STATUS_REG                     0x10
24 #define LOONGSON2_THSENS_OUT_REG                        0x14
25
26 #define LOONGSON2_THSENS_INT_LO                         BIT(0)
27 #define LOONGSON2_THSENS_INT_HIGH                       BIT(1)
28 #define LOONGSON2_THSENS_OUT_MASK                       0xFF
29
30 struct loongson2_thermal_chip_data {
31         unsigned int    thermal_sensor_sel;
32 };
33
34 struct loongson2_thermal_data {
35         void __iomem    *regs;
36         const struct loongson2_thermal_chip_data *chip_data;
37 };
38
39 static int loongson2_thermal_set(struct loongson2_thermal_data *data,
40                                         int low, int high, bool enable)
41 {
42         u64 reg_ctrl = 0;
43         int reg_off = data->chip_data->thermal_sensor_sel * 2;
44
45         low = clamp(-40, low, high);
46         high = clamp(125, low, high);
47
48         low += HECTO;
49         high += HECTO;
50
51         reg_ctrl = low;
52         reg_ctrl |= enable ? 0x100 : 0;
53         writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_LOW_REG + reg_off);
54
55         reg_ctrl = high;
56         reg_ctrl |= enable ? 0x100 : 0;
57         writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_HI_REG + reg_off);
58
59         return 0;
60 }
61
62 static int loongson2_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
63 {
64         u32 reg_val;
65         struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
66
67         reg_val = readl(data->regs + LOONGSON2_THSENS_OUT_REG);
68         *temp = ((reg_val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO;
69
70         return 0;
71 }
72
73 static irqreturn_t loongson2_thermal_irq_thread(int irq, void *dev)
74 {
75         struct thermal_zone_device *tzd = dev;
76         struct loongson2_thermal_data *data = thermal_zone_device_priv(tzd);
77
78         writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs +
79                 LOONGSON2_THSENS_STATUS_REG);
80
81         thermal_zone_device_update(tzd, THERMAL_EVENT_UNSPECIFIED);
82
83         return IRQ_HANDLED;
84 }
85
86 static int loongson2_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
87 {
88         struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
89
90         return loongson2_thermal_set(data, low/MILLI, high/MILLI, true);
91 }
92
93 static const struct thermal_zone_device_ops loongson2_of_thermal_ops = {
94         .get_temp = loongson2_thermal_get_temp,
95         .set_trips = loongson2_thermal_set_trips,
96 };
97
98 static int loongson2_thermal_probe(struct platform_device *pdev)
99 {
100         struct device *dev = &pdev->dev;
101         struct loongson2_thermal_data *data;
102         struct thermal_zone_device *tzd;
103         int ret, irq, i;
104
105         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
106         if (!data)
107                 return -ENOMEM;
108
109         data->chip_data = device_get_match_data(dev);
110
111         data->regs = devm_platform_ioremap_resource(pdev, 0);
112         if (IS_ERR(data->regs))
113                 return PTR_ERR(data->regs);
114
115         irq = platform_get_irq(pdev, 0);
116         if (irq < 0)
117                 return irq;
118
119         writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs +
120                 LOONGSON2_THSENS_STATUS_REG);
121
122         loongson2_thermal_set(data, 0, 0, false);
123
124         for (i = 0; i <= LOONGSON2_MAX_SENSOR_SEL_NUM; i++) {
125                 tzd = devm_thermal_of_zone_register(dev, i, data,
126                         &loongson2_of_thermal_ops);
127
128                 if (!IS_ERR(tzd))
129                         break;
130
131                 if (PTR_ERR(tzd) != -ENODEV)
132                         continue;
133
134                 return dev_err_probe(dev, PTR_ERR(tzd), "failed to register");
135         }
136
137         ret = devm_request_threaded_irq(dev, irq, NULL, loongson2_thermal_irq_thread,
138                         IRQF_ONESHOT, "loongson2_thermal", tzd);
139         if (ret < 0)
140                 return dev_err_probe(dev, ret, "failed to request alarm irq\n");
141
142         devm_thermal_add_hwmon_sysfs(dev, tzd);
143
144         return 0;
145 }
146
147 static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k1000_data = {
148         .thermal_sensor_sel = 0,
149 };
150
151 static const struct of_device_id of_loongson2_thermal_match[] = {
152         {
153                 .compatible = "loongson,ls2k1000-thermal",
154                 .data = &loongson2_thermal_ls2k1000_data,
155         },
156         { /* end */ }
157 };
158 MODULE_DEVICE_TABLE(of, of_loongson2_thermal_match);
159
160 static struct platform_driver loongson2_thermal_driver = {
161         .driver = {
162                 .name           = "loongson2_thermal",
163                 .of_match_table = of_loongson2_thermal_match,
164         },
165         .probe  = loongson2_thermal_probe,
166 };
167 module_platform_driver(loongson2_thermal_driver);
168
169 MODULE_DESCRIPTION("Loongson2 thermal driver");
170 MODULE_LICENSE("GPL");