1 /* Driver for Realtek PCI-Express card reader
3 * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2, or (at your option) any
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
15 * You should have received a copy of the GNU General Public License along
16 * with this program; if not, see <http://www.gnu.org/licenses/>.
19 * Wei WANG (wei_wang@realsil.com.cn)
20 * Micky Ching (micky_ching@realsil.com.cn)
23 #include <linux/blkdev.h>
24 #include <linux/kthread.h>
25 #include <linux/sched.h>
26 #include <linux/workqueue.h>
33 MODULE_DESCRIPTION("Realtek PCI-Express card reader rts5208/rts5288 driver");
34 MODULE_LICENSE("GPL");
36 static unsigned int delay_use = 1;
37 module_param(delay_use, uint, 0644);
38 MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
41 module_param(ss_en, int, 0644);
42 MODULE_PARM_DESC(ss_en, "enable selective suspend");
44 static int ss_interval = 50;
45 module_param(ss_interval, int, 0644);
46 MODULE_PARM_DESC(ss_interval, "Interval to enter ss state in seconds");
48 static int auto_delink_en;
49 module_param(auto_delink_en, int, 0644);
50 MODULE_PARM_DESC(auto_delink_en, "enable auto delink");
52 static unsigned char aspm_l0s_l1_en;
53 module_param(aspm_l0s_l1_en, byte, 0644);
54 MODULE_PARM_DESC(aspm_l0s_l1_en, "enable device aspm");
57 module_param(msi_en, int, 0644);
58 MODULE_PARM_DESC(msi_en, "enable msi");
60 static irqreturn_t rtsx_interrupt(int irq, void *dev_id);
62 /***********************************************************************
64 ***********************************************************************/
66 static const char *host_info(struct Scsi_Host *host)
68 return "SCSI emulation for PCI-Express Mass Storage devices";
71 static int slave_alloc(struct scsi_device *sdev)
74 * Set the INQUIRY transfer length to 36. We don't use any of
75 * the extra data and many devices choke if asked for more or
78 sdev->inquiry_len = 36;
82 static int slave_configure(struct scsi_device *sdev)
85 * Scatter-gather buffers (all but the last) must have a length
86 * divisible by the bulk maxpacket size. Otherwise a data packet
87 * would end up being short, causing a premature end to the data
88 * transfer. Since high-speed bulk pipes have a maxpacket size
89 * of 512, we'll use that as the scsi device queue's DMA alignment
90 * mask. Guaranteeing proper alignment of the first buffer will
91 * have the desired effect because, except at the beginning and
92 * the end, scatter-gather buffers follow page boundaries.
94 blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
96 /* Set the SCSI level to at least 2. We'll leave it at 3 if that's
97 * what is originally reported. We need this to avoid confusing
98 * the SCSI layer with devices that report 0 or 1, but need 10-byte
99 * commands (ala ATAPI devices behind certain bridges, or devices
100 * which simply have broken INQUIRY data).
102 * NOTE: This means /dev/sg programs (ala cdrecord) will get the
103 * actual information. This seems to be the preference for
104 * programs like that.
106 * NOTE: This also means that /proc/scsi/scsi and sysfs may report
107 * the actual value or the modified one, depending on where the
110 if (sdev->scsi_level < SCSI_2) {
111 sdev->scsi_level = SCSI_2;
112 sdev->sdev_target->scsi_level = SCSI_2;
118 /***********************************************************************
119 * /proc/scsi/ functions
120 ***********************************************************************/
122 /* we use this macro to help us write into the buffer */
124 #define SPRINTF(args...) \
126 if (pos < buffer + length) \
127 pos += sprintf(pos, ## args); \
130 /* queue a command */
131 /* This is always called with scsi_lock(host) held */
132 static int queuecommand_lck(struct scsi_cmnd *srb,
133 void (*done)(struct scsi_cmnd *))
135 struct rtsx_dev *dev = host_to_rtsx(srb->device->host);
136 struct rtsx_chip *chip = dev->chip;
138 /* check for state-transition errors */
140 dev_err(&dev->pci->dev, "Error: chip->srb = %p\n",
142 return SCSI_MLQUEUE_HOST_BUSY;
145 /* fail the command if we are disconnecting */
146 if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
147 dev_info(&dev->pci->dev, "Fail command during disconnect\n");
148 srb->result = DID_NO_CONNECT << 16;
153 /* enqueue the command and wake up the control thread */
154 srb->scsi_done = done;
156 complete(&dev->cmnd_ready);
161 static DEF_SCSI_QCMD(queuecommand)
163 /***********************************************************************
164 * Error handling functions
165 ***********************************************************************/
167 /* Command timeout and abort */
168 static int command_abort(struct scsi_cmnd *srb)
170 struct Scsi_Host *host = srb->device->host;
171 struct rtsx_dev *dev = host_to_rtsx(host);
172 struct rtsx_chip *chip = dev->chip;
174 dev_info(&dev->pci->dev, "%s called\n", __func__);
178 /* Is this command still active? */
179 if (chip->srb != srb) {
181 dev_info(&dev->pci->dev, "-- nothing to abort\n");
185 rtsx_set_stat(chip, RTSX_STAT_ABORT);
189 /* Wait for the aborted command to finish */
190 wait_for_completion(&dev->notify);
196 * This invokes the transport reset mechanism to reset the state of the
199 static int device_reset(struct scsi_cmnd *srb)
201 struct rtsx_dev *dev = host_to_rtsx(srb->device->host);
203 dev_info(&dev->pci->dev, "%s called\n", __func__);
209 * this defines our host template, with which we'll allocate hosts
212 static struct scsi_host_template rtsx_host_template = {
213 /* basic userland interface stuff */
214 .name = CR_DRIVER_NAME,
215 .proc_name = CR_DRIVER_NAME,
218 /* command interface -- queued only */
219 .queuecommand = queuecommand,
221 /* error and abort handlers */
222 .eh_abort_handler = command_abort,
223 .eh_device_reset_handler = device_reset,
225 /* queue commands only, only one command per LUN */
228 /* unknown initiator id */
231 .slave_alloc = slave_alloc,
232 .slave_configure = slave_configure,
234 /* lots of sg segments can be handled */
235 .sg_tablesize = SG_ALL,
237 /* limit the total size of a transfer to 120 KB */
240 /* merge commands... this seems to help performance, but
241 * periodically someone should test to see which setting is more
249 /* we do our own delay after a device or bus reset */
250 .skip_settle_delay = 1,
252 /* module management */
253 .module = THIS_MODULE
256 static int rtsx_acquire_irq(struct rtsx_dev *dev)
258 struct rtsx_chip *chip = dev->chip;
260 dev_info(&dev->pci->dev, "%s: chip->msi_en = %d, pci->irq = %d\n",
261 __func__, chip->msi_en, dev->pci->irq);
263 if (request_irq(dev->pci->irq, rtsx_interrupt,
264 chip->msi_en ? 0 : IRQF_SHARED,
265 CR_DRIVER_NAME, dev)) {
266 dev_err(&dev->pci->dev,
267 "rtsx: unable to grab IRQ %d, disabling device\n",
272 dev->irq = dev->pci->irq;
273 pci_intx(dev->pci, !chip->msi_en);
278 int rtsx_read_pci_cfg_byte(u8 bus, u8 dev, u8 func, u8 offset, u8 *val)
280 struct pci_dev *pdev;
282 u8 devfn = (dev << 3) | func;
284 pdev = pci_get_bus_and_slot(bus, devfn);
288 pci_read_config_byte(pdev, offset, &data);
299 static int rtsx_suspend(struct pci_dev *pci, pm_message_t state)
301 struct rtsx_dev *dev = pci_get_drvdata(pci);
302 struct rtsx_chip *chip;
307 /* lock the device pointers */
308 mutex_lock(&dev->dev_mutex);
312 rtsx_do_before_power_down(chip, PM_S3);
315 free_irq(dev->irq, (void *)dev);
320 pci_disable_msi(pci);
323 pci_enable_wake(pci, pci_choose_state(pci, state), 1);
324 pci_disable_device(pci);
325 pci_set_power_state(pci, pci_choose_state(pci, state));
327 /* unlock the device pointers */
328 mutex_unlock(&dev->dev_mutex);
333 static int rtsx_resume(struct pci_dev *pci)
335 struct rtsx_dev *dev = pci_get_drvdata(pci);
336 struct rtsx_chip *chip;
343 /* lock the device pointers */
344 mutex_lock(&dev->dev_mutex);
346 pci_set_power_state(pci, PCI_D0);
347 pci_restore_state(pci);
348 if (pci_enable_device(pci) < 0) {
349 dev_err(&dev->pci->dev,
350 "%s: pci_enable_device failed, disabling device\n",
352 /* unlock the device pointers */
353 mutex_unlock(&dev->dev_mutex);
359 if (pci_enable_msi(pci) < 0)
363 if (rtsx_acquire_irq(dev) < 0) {
364 /* unlock the device pointers */
365 mutex_unlock(&dev->dev_mutex);
369 rtsx_write_register(chip, HOST_SLEEP_STATE, 0x03, 0x00);
370 rtsx_init_chip(chip);
372 /* unlock the device pointers */
373 mutex_unlock(&dev->dev_mutex);
377 #endif /* CONFIG_PM */
379 static void rtsx_shutdown(struct pci_dev *pci)
381 struct rtsx_dev *dev = pci_get_drvdata(pci);
382 struct rtsx_chip *chip;
389 rtsx_do_before_power_down(chip, PM_S1);
392 free_irq(dev->irq, (void *)dev);
397 pci_disable_msi(pci);
399 pci_disable_device(pci);
402 static int rtsx_control_thread(void *__dev)
404 struct rtsx_dev *dev = __dev;
405 struct rtsx_chip *chip = dev->chip;
406 struct Scsi_Host *host = rtsx_to_host(dev);
409 if (wait_for_completion_interruptible(&dev->cmnd_ready))
412 /* lock the device pointers */
413 mutex_lock(&dev->dev_mutex);
415 /* if the device has disconnected, we are free to exit */
416 if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
417 dev_info(&dev->pci->dev, "-- rtsx-control exiting\n");
418 mutex_unlock(&dev->dev_mutex);
422 /* lock access to the state */
425 /* has the command aborted ? */
426 if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
427 chip->srb->result = DID_ABORT << 16;
433 /* reject the command if the direction indicator
436 if (chip->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
437 dev_err(&dev->pci->dev, "UNKNOWN data direction\n");
438 chip->srb->result = DID_ERROR << 16;
441 /* reject if target != 0 or if LUN is higher than
442 * the maximum known LUN
444 else if (chip->srb->device->id) {
445 dev_err(&dev->pci->dev, "Bad target number (%d:%d)\n",
446 chip->srb->device->id,
447 (u8)chip->srb->device->lun);
448 chip->srb->result = DID_BAD_TARGET << 16;
451 else if (chip->srb->device->lun > chip->max_lun) {
452 dev_err(&dev->pci->dev, "Bad LUN (%d:%d)\n",
453 chip->srb->device->id,
454 (u8)chip->srb->device->lun);
455 chip->srb->result = DID_BAD_TARGET << 16;
458 /* we've got a command, let's do it! */
460 scsi_show_command(chip);
461 rtsx_invoke_transport(chip->srb, chip);
464 /* lock access to the state */
467 /* did the command already complete because of a disconnect? */
469 ; /* nothing to do */
471 /* indicate that the command is done */
472 else if (chip->srb->result != DID_ABORT << 16) {
473 chip->srb->scsi_done(chip->srb);
476 dev_err(&dev->pci->dev, "scsi command aborted\n");
479 if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
480 complete(&dev->notify);
482 rtsx_set_stat(chip, RTSX_STAT_IDLE);
485 /* finished working on this command */
489 /* unlock the device pointers */
490 mutex_unlock(&dev->dev_mutex);
493 /* notify the exit routine that we're actually exiting now
495 * complete()/wait_for_completion() is similar to up()/down(),
496 * except that complete() is safe in the case where the structure
497 * is getting deleted in a parallel mode of execution (i.e. just
498 * after the down() -- that's necessary for the thread-shutdown
501 * complete_and_exit() goes even further than this -- it is safe in
502 * the case that the thread of the caller is going away (not just
503 * the structure) -- this is necessary for the module-remove case.
504 * This is important in preemption kernels, which transfer the flow
505 * of execution immediately upon a complete().
507 complete_and_exit(&dev->control_exit, 0);
510 static int rtsx_polling_thread(void *__dev)
512 struct rtsx_dev *dev = __dev;
513 struct rtsx_chip *chip = dev->chip;
514 struct sd_info *sd_card = &chip->sd_card;
515 struct xd_info *xd_card = &chip->xd_card;
516 struct ms_info *ms_card = &chip->ms_card;
518 sd_card->cleanup_counter = 0;
519 xd_card->cleanup_counter = 0;
520 ms_card->cleanup_counter = 0;
522 /* Wait until SCSI scan finished */
523 wait_timeout((delay_use + 5) * 1000);
526 set_current_state(TASK_INTERRUPTIBLE);
527 schedule_timeout(msecs_to_jiffies(POLLING_INTERVAL));
529 /* lock the device pointers */
530 mutex_lock(&dev->dev_mutex);
532 /* if the device has disconnected, we are free to exit */
533 if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
534 dev_info(&dev->pci->dev, "-- rtsx-polling exiting\n");
535 mutex_unlock(&dev->dev_mutex);
539 mutex_unlock(&dev->dev_mutex);
541 mspro_polling_format_status(chip);
543 /* lock the device pointers */
544 mutex_lock(&dev->dev_mutex);
546 rtsx_polling_func(chip);
548 /* unlock the device pointers */
549 mutex_unlock(&dev->dev_mutex);
552 complete_and_exit(&dev->polling_exit, 0);
558 static irqreturn_t rtsx_interrupt(int irq, void *dev_id)
560 struct rtsx_dev *dev = dev_id;
561 struct rtsx_chip *chip;
573 spin_lock(&dev->reg_lock);
575 retval = rtsx_pre_handle_interrupt(chip);
576 if (retval == STATUS_FAIL) {
577 spin_unlock(&dev->reg_lock);
578 if (chip->int_reg == 0xFFFFFFFF)
583 status = chip->int_reg;
585 if (dev->check_card_cd) {
586 if (!(dev->check_card_cd & status)) {
587 /* card not exist, return TRANS_RESULT_FAIL */
588 dev->trans_result = TRANS_RESULT_FAIL;
595 if (status & (NEED_COMPLETE_INT | DELINK_INT)) {
596 if (status & (TRANS_FAIL_INT | DELINK_INT)) {
597 if (status & DELINK_INT)
598 RTSX_SET_DELINK(chip);
599 dev->trans_result = TRANS_RESULT_FAIL;
602 } else if (status & TRANS_OK_INT) {
603 dev->trans_result = TRANS_RESULT_OK;
606 } else if (status & DATA_DONE_INT) {
607 dev->trans_result = TRANS_NOT_READY;
608 if (dev->done && (dev->trans_state == STATE_TRANS_SG))
614 spin_unlock(&dev->reg_lock);
618 /* Release all our dynamic resources */
619 static void rtsx_release_resources(struct rtsx_dev *dev)
621 dev_info(&dev->pci->dev, "-- %s\n", __func__);
623 /* Tell the control thread to exit. The SCSI host must
624 * already have been removed so it won't try to queue
627 dev_info(&dev->pci->dev, "-- sending exit command to thread\n");
628 complete(&dev->cmnd_ready);
630 wait_for_completion(&dev->control_exit);
631 if (dev->polling_thread)
632 wait_for_completion(&dev->polling_exit);
636 if (dev->rtsx_resv_buf) {
637 dev->chip->host_cmds_ptr = NULL;
638 dev->chip->host_sg_tbl_ptr = NULL;
642 free_irq(dev->irq, (void *)dev);
643 if (dev->chip->msi_en)
644 pci_disable_msi(dev->pci);
646 iounmap(dev->remap_addr);
648 rtsx_release_chip(dev->chip);
653 * First stage of disconnect processing: stop all commands and remove
656 static void quiesce_and_remove_host(struct rtsx_dev *dev)
658 struct Scsi_Host *host = rtsx_to_host(dev);
659 struct rtsx_chip *chip = dev->chip;
662 * Prevent new transfers, stop the current command, and
663 * interrupt a SCSI-scan or device-reset delay
665 mutex_lock(&dev->dev_mutex);
667 rtsx_set_stat(chip, RTSX_STAT_DISCONNECT);
669 mutex_unlock(&dev->dev_mutex);
670 wake_up(&dev->delay_wait);
671 wait_for_completion(&dev->scanning_done);
673 /* Wait some time to let other threads exist */
677 * queuecommand won't accept any new commands and the control
678 * thread won't execute a previously-queued command. If there
679 * is such a command pending, complete it with an error.
681 mutex_lock(&dev->dev_mutex);
683 chip->srb->result = DID_NO_CONNECT << 16;
685 chip->srb->scsi_done(dev->chip->srb);
689 mutex_unlock(&dev->dev_mutex);
691 /* Now we own no commands so it's safe to remove the SCSI host */
692 scsi_remove_host(host);
695 /* Second stage of disconnect processing: deallocate all resources */
696 static void release_everything(struct rtsx_dev *dev)
698 rtsx_release_resources(dev);
701 * Drop our reference to the host; the SCSI core will free it
702 * when the refcount becomes 0.
704 scsi_host_put(rtsx_to_host(dev));
707 /* Thread to carry out delayed SCSI-device scanning */
708 static int rtsx_scan_thread(void *__dev)
710 struct rtsx_dev *dev = __dev;
711 struct rtsx_chip *chip = dev->chip;
713 /* Wait for the timeout to expire or for a disconnect */
715 dev_info(&dev->pci->dev,
716 "%s: waiting for device to settle before scanning\n",
718 wait_event_interruptible_timeout
720 rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT),
724 /* If the device is still connected, perform the scanning */
725 if (!rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
726 scsi_scan_host(rtsx_to_host(dev));
727 dev_info(&dev->pci->dev, "%s: device scan complete\n",
730 /* Should we unbind if no devices were detected? */
733 complete_and_exit(&dev->scanning_done, 0);
736 static void rtsx_init_options(struct rtsx_chip *chip)
738 chip->vendor_id = chip->rtsx->pci->vendor;
739 chip->product_id = chip->rtsx->pci->device;
742 chip->driver_first_load = 1;
743 #ifdef HW_AUTO_SWITCH_SD_BUS
744 chip->sdio_in_charge = 0;
747 chip->mspro_formatter_enable = 1;
749 chip->use_hw_setting = 0;
750 chip->lun_mode = DEFAULT_SINGLE;
751 chip->auto_delink_en = auto_delink_en;
753 chip->ss_idle_period = ss_interval * 1000;
754 chip->remote_wakeup_en = 0;
755 chip->aspm_l0s_l1_en = aspm_l0s_l1_en;
756 chip->dynamic_aspm = 1;
757 chip->fpga_sd_sdr104_clk = CLK_200;
758 chip->fpga_sd_ddr50_clk = CLK_100;
759 chip->fpga_sd_sdr50_clk = CLK_100;
760 chip->fpga_sd_hs_clk = CLK_100;
761 chip->fpga_mmc_52m_clk = CLK_80;
762 chip->fpga_ms_hg_clk = CLK_80;
763 chip->fpga_ms_4bit_clk = CLK_80;
764 chip->fpga_ms_1bit_clk = CLK_40;
765 chip->asic_sd_sdr104_clk = 203;
766 chip->asic_sd_sdr50_clk = 98;
767 chip->asic_sd_ddr50_clk = 98;
768 chip->asic_sd_hs_clk = 98;
769 chip->asic_mmc_52m_clk = 98;
770 chip->asic_ms_hg_clk = 117;
771 chip->asic_ms_4bit_clk = 78;
772 chip->asic_ms_1bit_clk = 39;
773 chip->ssc_depth_sd_sdr104 = SSC_DEPTH_2M;
774 chip->ssc_depth_sd_sdr50 = SSC_DEPTH_2M;
775 chip->ssc_depth_sd_ddr50 = SSC_DEPTH_1M;
776 chip->ssc_depth_sd_hs = SSC_DEPTH_1M;
777 chip->ssc_depth_mmc_52m = SSC_DEPTH_1M;
778 chip->ssc_depth_ms_hg = SSC_DEPTH_1M;
779 chip->ssc_depth_ms_4bit = SSC_DEPTH_512K;
780 chip->ssc_depth_low_speed = SSC_DEPTH_512K;
782 chip->sd_speed_prior = 0x01040203;
783 chip->sd_current_prior = 0x00010203;
784 chip->sd_ctl = SD_PUSH_POINT_AUTO |
785 SD_SAMPLE_POINT_AUTO |
786 SUPPORT_MMC_DDR_MODE;
787 chip->sd_ddr_tx_phase = 0;
788 chip->mmc_ddr_tx_phase = 1;
789 chip->sd_default_tx_phase = 15;
790 chip->sd_default_rx_phase = 15;
791 chip->pmos_pwr_on_interval = 200;
792 chip->sd_voltage_switch_delay = 1000;
793 chip->ms_power_class_en = 3;
795 chip->sd_400mA_ocp_thd = 1;
796 chip->sd_800mA_ocp_thd = 5;
797 chip->ms_ocp_thd = 2;
799 chip->card_drive_sel = 0x55;
800 chip->sd30_drive_sel_1v8 = 0x03;
801 chip->sd30_drive_sel_3v3 = 0x01;
803 chip->do_delink_before_power_down = 1;
804 chip->auto_power_down = 1;
805 chip->polling_config = 0;
807 chip->force_clkreq_0 = 1;
808 chip->ft2_fast_mode = 0;
810 chip->sdio_retry_cnt = 1;
812 chip->xd_timeout = 2000;
813 chip->sd_timeout = 10000;
814 chip->ms_timeout = 2000;
815 chip->mspro_timeout = 15000;
817 chip->power_down_in_ss = 1;
823 chip->delink_stage1_step = 100;
824 chip->delink_stage2_step = 40;
825 chip->delink_stage3_step = 20;
827 chip->auto_delink_in_L1 = 1;
829 chip->msi_en = msi_en;
830 chip->hp_watch_bios_hotplug = 0;
831 chip->max_payload = 0;
832 chip->phy_voltage = 0;
834 chip->support_ms_8bit = 1;
835 chip->s3_pwr_off_delay = 1000;
838 static int rtsx_probe(struct pci_dev *pci,
839 const struct pci_device_id *pci_id)
841 struct Scsi_Host *host;
842 struct rtsx_dev *dev;
844 struct task_struct *th;
846 dev_dbg(&pci->dev, "Realtek PCI-E card reader detected\n");
848 err = pcim_enable_device(pci);
850 dev_err(&pci->dev, "PCI enable device failed!\n");
854 err = pci_request_regions(pci, CR_DRIVER_NAME);
856 dev_err(&pci->dev, "PCI request regions for %s failed!\n",
862 * Ask the SCSI layer to allocate a host structure, with extra
863 * space at the end for our private rtsx_dev structure.
865 host = scsi_host_alloc(&rtsx_host_template, sizeof(*dev));
867 dev_err(&pci->dev, "Unable to allocate the scsi host\n");
871 dev = host_to_rtsx(host);
872 memset(dev, 0, sizeof(struct rtsx_dev));
874 dev->chip = kzalloc(sizeof(*dev->chip), GFP_KERNEL);
880 spin_lock_init(&dev->reg_lock);
881 mutex_init(&dev->dev_mutex);
882 init_completion(&dev->cmnd_ready);
883 init_completion(&dev->control_exit);
884 init_completion(&dev->polling_exit);
885 init_completion(&dev->notify);
886 init_completion(&dev->scanning_done);
887 init_waitqueue_head(&dev->delay_wait);
892 dev_info(&pci->dev, "Resource length: 0x%x\n",
893 (unsigned int)pci_resource_len(pci, 0));
894 dev->addr = pci_resource_start(pci, 0);
895 dev->remap_addr = ioremap_nocache(dev->addr, pci_resource_len(pci, 0));
896 if (!dev->remap_addr) {
897 dev_err(&pci->dev, "ioremap error\n");
903 * Using "unsigned long" cast here to eliminate gcc warning in
906 dev_info(&pci->dev, "Original address: 0x%lx, remapped address: 0x%lx\n",
907 (unsigned long)(dev->addr), (unsigned long)(dev->remap_addr));
909 dev->rtsx_resv_buf = dmam_alloc_coherent(&pci->dev, RTSX_RESV_BUF_LEN,
910 &dev->rtsx_resv_buf_addr, GFP_KERNEL);
911 if (!dev->rtsx_resv_buf) {
912 dev_err(&pci->dev, "alloc dma buffer fail\n");
916 dev->chip->host_cmds_ptr = dev->rtsx_resv_buf;
917 dev->chip->host_cmds_addr = dev->rtsx_resv_buf_addr;
918 dev->chip->host_sg_tbl_ptr = dev->rtsx_resv_buf + HOST_CMDS_BUF_LEN;
919 dev->chip->host_sg_tbl_addr = dev->rtsx_resv_buf_addr +
922 dev->chip->rtsx = dev;
924 rtsx_init_options(dev->chip);
926 dev_info(&pci->dev, "pci->irq = %d\n", pci->irq);
928 if (dev->chip->msi_en) {
929 if (pci_enable_msi(pci) < 0)
930 dev->chip->msi_en = 0;
933 if (rtsx_acquire_irq(dev) < 0) {
939 synchronize_irq(dev->irq);
941 rtsx_init_chip(dev->chip);
944 * set the supported max_lun and max_id for the scsi host
945 * NOTE: the minimal value of max_id is 1
948 host->max_lun = dev->chip->max_lun;
950 /* Start up our control thread */
951 th = kthread_run(rtsx_control_thread, dev, CR_DRIVER_NAME);
953 dev_err(&pci->dev, "Unable to start control thread\n");
957 dev->ctl_thread = th;
959 err = scsi_add_host(host, &pci->dev);
961 dev_err(&pci->dev, "Unable to add the scsi host\n");
965 /* Start up the thread for delayed SCSI-device scanning */
966 th = kthread_run(rtsx_scan_thread, dev, "rtsx-scan");
968 dev_err(&pci->dev, "Unable to start the device-scanning thread\n");
969 complete(&dev->scanning_done);
970 quiesce_and_remove_host(dev);
975 /* Start up the thread for polling thread */
976 th = kthread_run(rtsx_polling_thread, dev, "rtsx-polling");
978 dev_err(&pci->dev, "Unable to start the device-polling thread\n");
979 quiesce_and_remove_host(dev);
983 dev->polling_thread = th;
985 pci_set_drvdata(pci, dev);
989 /* We come here if there are any problems */
991 dev_err(&pci->dev, "%s failed\n", __func__);
992 release_everything(dev);
997 static void rtsx_remove(struct pci_dev *pci)
999 struct rtsx_dev *dev = pci_get_drvdata(pci);
1001 dev_info(&pci->dev, "%s called\n", __func__);
1003 quiesce_and_remove_host(dev);
1004 release_everything(dev);
1008 static const struct pci_device_id rtsx_ids[] = {
1009 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x5208),
1010 PCI_CLASS_OTHERS << 16, 0xFF0000 },
1011 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x5288),
1012 PCI_CLASS_OTHERS << 16, 0xFF0000 },
1016 MODULE_DEVICE_TABLE(pci, rtsx_ids);
1018 /* pci_driver definition */
1019 static struct pci_driver rtsx_driver = {
1020 .name = CR_DRIVER_NAME,
1021 .id_table = rtsx_ids,
1022 .probe = rtsx_probe,
1023 .remove = rtsx_remove,
1025 .suspend = rtsx_suspend,
1026 .resume = rtsx_resume,
1028 .shutdown = rtsx_shutdown,
1031 module_pci_driver(rtsx_driver);