drivers/staging/rtl8723bs/include/hal_pg.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /******************************************************************************
   3  *
   4  * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
   5  *
   6  ******************************************************************************/
   7
   8 #ifndef __HAL_PG_H__
   9 #define __HAL_PG_H__
  10
  11 #define MAX_RF_PATH                             4
  12 /* MAX_TX_COUNT must always be set to 4, otherwise the read efuse table
  13  * sequence will be wrong.
  14  */
  15 #define MAX_TX_COUNT                            4
  16
  17 /*  TX power by rate table. */
  18 /*  RF: = AB = 0/1 */
  19 /*  CCK = 0 OFDM = 1 HT-MCS 0-7 = 2 */
  20 #define TX_PWR_BY_RATE_NUM_RATE                 84
  21 #define MAX_RF_PATH_NUM                         2
  22 #define MAX_CHNL_GROUP_24G                      6
  23 #define EEPROM_DEFAULT_BOARD_OPTION             0x00
  24
  25 /* EEPROM/Efuse PG Offset for 8723BE/8723BU/8723BS */
  26 /*  0x10 ~ 0x63 = TX power area. */
  27 #define EEPROM_TX_PWR_INX_8723B                 0x10
  28 /* New EFUSE default value */
  29 #define EEPROM_DEFAULT_24G_INDEX                0x2D
  30 #define EEPROM_DEFAULT_24G_HT20_DIFF            0X02
  31 #define EEPROM_DEFAULT_24G_OFDM_DIFF            0X04
  32 #define EEPROM_Default_ThermalMeter_8723B       0x18
  33 #define EEPROM_Default_CrystalCap_8723B         0x20
  34
  35 #define EEPROM_ChannelPlan_8723B                0xB8
  36 #define EEPROM_XTAL_8723B                       0xB9
  37 #define EEPROM_THERMAL_METER_8723B              0xBA
  38
  39 #define EEPROM_RF_BOARD_OPTION_8723B            0xC1
  40 #define EEPROM_RF_BT_SETTING_8723B              0xC3
  41 #define EEPROM_VERSION_8723B                    0xC4
  42 #define EEPROM_CustomID_8723B                   0xC5
  43 #define EEPROM_DEFAULT_DIFF                     0XFE
  44
  45 /* RTL8723BS */
  46 #define EEPROM_MAC_ADDR_8723BS                  0x11A
  47 #define EEPROM_Voltage_ADDR_8723B               0x8
  48 #define RTL_EEPROM_ID                           0x8129
  49
  50 struct TxPowerInfo24G {
  51         u8 IndexCCK_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G];
  52         u8 IndexBW40_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G];
  53         /* If only one tx, only BW20 and OFDM are used. */
  54         s8 CCK_Diff[MAX_RF_PATH][MAX_TX_COUNT];
  55         s8 OFDM_Diff[MAX_RF_PATH][MAX_TX_COUNT];
  56         s8 BW20_Diff[MAX_RF_PATH][MAX_TX_COUNT];
  57         s8 BW40_Diff[MAX_RF_PATH][MAX_TX_COUNT];
  58 };
  59
  60 enum {
  61         Ant_x2  = 0,
  62         Ant_x1  = 1
  63 };
  64
  65 enum {
  66         BT_RTL8723B = 8,
  67 };
  68
  69 #endif