GNU Linux-libre 4.14.259-gnu1
[releases.git] / drivers / staging / fbtft / fb_hx8347d.c
1 /*
2  * FB driver for the HX8347D LCD Controller
3  *
4  * Copyright (C) 2013 Christian Vogelgsang
5  *
6  * Based on driver code found here: https://github.com/watterott/r61505u-Adapter
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  */
18
19 #include <linux/module.h>
20 #include <linux/kernel.h>
21 #include <linux/init.h>
22 #include <linux/delay.h>
23
24 #include "fbtft.h"
25
26 #define DRVNAME         "fb_hx8347d"
27 #define WIDTH           320
28 #define HEIGHT          240
29 #define DEFAULT_GAMMA   "0 0 0 0 0 0 0 0 0 0 0 0 0 0\n" \
30                         "0 0 0 0 0 0 0 0 0 0 0 0 0 0"
31
32 static int init_display(struct fbtft_par *par)
33 {
34         par->fbtftops.reset(par);
35
36         /* driving ability */
37         write_reg(par, 0xEA, 0x00);
38         write_reg(par, 0xEB, 0x20);
39         write_reg(par, 0xEC, 0x0C);
40         write_reg(par, 0xED, 0xC4);
41         write_reg(par, 0xE8, 0x40);
42         write_reg(par, 0xE9, 0x38);
43         write_reg(par, 0xF1, 0x01);
44         write_reg(par, 0xF2, 0x10);
45         write_reg(par, 0x27, 0xA3);
46
47         /* power voltage */
48         write_reg(par, 0x1B, 0x1B);
49         write_reg(par, 0x1A, 0x01);
50         write_reg(par, 0x24, 0x2F);
51         write_reg(par, 0x25, 0x57);
52
53         /* VCOM offset */
54         write_reg(par, 0x23, 0x8D); /* for flicker adjust */
55
56         /* power on */
57         write_reg(par, 0x18, 0x36);
58         write_reg(par, 0x19, 0x01); /* start osc */
59         write_reg(par, 0x01, 0x00); /* wakeup */
60         write_reg(par, 0x1F, 0x88);
61         mdelay(5);
62         write_reg(par, 0x1F, 0x80);
63         mdelay(5);
64         write_reg(par, 0x1F, 0x90);
65         mdelay(5);
66         write_reg(par, 0x1F, 0xD0);
67         mdelay(5);
68
69         /* color selection */
70         write_reg(par, 0x17, 0x05); /* 65k */
71
72         /*panel characteristic */
73         write_reg(par, 0x36, 0x00);
74
75         /*display on */
76         write_reg(par, 0x28, 0x38);
77         mdelay(40);
78         write_reg(par, 0x28, 0x3C);
79
80         /* orientation */
81         write_reg(par, 0x16, 0x60 | (par->bgr << 3));
82
83         return 0;
84 }
85
86 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
87 {
88         write_reg(par, 0x02, (xs >> 8) & 0xFF);
89         write_reg(par, 0x03, xs & 0xFF);
90         write_reg(par, 0x04, (xe >> 8) & 0xFF);
91         write_reg(par, 0x05, xe & 0xFF);
92         write_reg(par, 0x06, (ys >> 8) & 0xFF);
93         write_reg(par, 0x07, ys & 0xFF);
94         write_reg(par, 0x08, (ye >> 8) & 0xFF);
95         write_reg(par, 0x09, ye & 0xFF);
96         write_reg(par, 0x22);
97 }
98
99 /*
100  * Gamma string format:
101  *   VRP0 VRP1 VRP2 VRP3 VRP4 VRP5 PRP0 PRP1 PKP0 PKP1 PKP2 PKP3 PKP4 CGM
102  *   VRN0 VRN1 VRN2 VRN3 VRN4 VRN5 PRN0 PRN1 PKN0 PKN1 PKN2 PKN3 PKN4 CGM
103  */
104 #define CURVE(num, idx)  curves[num * par->gamma.num_values + idx]
105 static int set_gamma(struct fbtft_par *par, u32 *curves)
106 {
107         unsigned long mask[] = {
108                 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x7f, 0x7f, 0x1f, 0x1f,
109                 0x1f, 0x1f, 0x1f, 0x0f,
110         };
111         int i, j;
112         int acc = 0;
113
114         /* apply mask */
115         for (i = 0; i < par->gamma.num_curves; i++)
116                 for (j = 0; j < par->gamma.num_values; j++) {
117                         acc += CURVE(i, j);
118                         CURVE(i, j) &= mask[j];
119                 }
120
121         if (acc == 0) /* skip if all values are zero */
122                 return 0;
123
124         for (i = 0; i < par->gamma.num_curves; i++) {
125                 write_reg(par, 0x40 + (i * 0x10), CURVE(i, 0));
126                 write_reg(par, 0x41 + (i * 0x10), CURVE(i, 1));
127                 write_reg(par, 0x42 + (i * 0x10), CURVE(i, 2));
128                 write_reg(par, 0x43 + (i * 0x10), CURVE(i, 3));
129                 write_reg(par, 0x44 + (i * 0x10), CURVE(i, 4));
130                 write_reg(par, 0x45 + (i * 0x10), CURVE(i, 5));
131                 write_reg(par, 0x46 + (i * 0x10), CURVE(i, 6));
132                 write_reg(par, 0x47 + (i * 0x10), CURVE(i, 7));
133                 write_reg(par, 0x48 + (i * 0x10), CURVE(i, 8));
134                 write_reg(par, 0x49 + (i * 0x10), CURVE(i, 9));
135                 write_reg(par, 0x4A + (i * 0x10), CURVE(i, 10));
136                 write_reg(par, 0x4B + (i * 0x10), CURVE(i, 11));
137                 write_reg(par, 0x4C + (i * 0x10), CURVE(i, 12));
138         }
139         write_reg(par, 0x5D, (CURVE(1, 0) << 4) | CURVE(0, 0));
140
141         return 0;
142 }
143
144 #undef CURVE
145
146 static struct fbtft_display display = {
147         .regwidth = 8,
148         .width = WIDTH,
149         .height = HEIGHT,
150         .gamma_num = 2,
151         .gamma_len = 14,
152         .gamma = DEFAULT_GAMMA,
153         .fbtftops = {
154                 .init_display = init_display,
155                 .set_addr_win = set_addr_win,
156                 .set_gamma = set_gamma,
157         },
158 };
159
160 FBTFT_REGISTER_DRIVER(DRVNAME, "himax,hx8347d", &display);
161
162 MODULE_ALIAS("spi:" DRVNAME);
163 MODULE_ALIAS("platform:" DRVNAME);
164 MODULE_ALIAS("spi:hx8347d");
165 MODULE_ALIAS("platform:hx8347d");
166
167 MODULE_DESCRIPTION("FB driver for the HX8347D LCD Controller");
168 MODULE_AUTHOR("Christian Vogelgsang");
169 MODULE_LICENSE("GPL");