GNU Linux-libre 4.14.332-gnu1
[releases.git] / drivers / scsi / ufs / ufshci.h
1 /*
2  * Universal Flash Storage Host controller driver
3  *
4  * This code is based on drivers/scsi/ufs/ufshci.h
5  * Copyright (C) 2011-2013 Samsung India Software Operations
6  *
7  * Authors:
8  *      Santosh Yaraganavi <santosh.sy@samsung.com>
9  *      Vinayak Holikatti <h.vinayak@samsung.com>
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License
13  * as published by the Free Software Foundation; either version 2
14  * of the License, or (at your option) any later version.
15  * See the COPYING file in the top-level directory or visit
16  * <http://www.gnu.org/licenses/gpl-2.0.html>
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  *
23  * This program is provided "AS IS" and "WITH ALL FAULTS" and
24  * without warranty of any kind. You are solely responsible for
25  * determining the appropriateness of using and distributing
26  * the program and assume all risks associated with your exercise
27  * of rights with respect to the program, including but not limited
28  * to infringement of third party rights, the risks and costs of
29  * program errors, damage to or loss of data, programs or equipment,
30  * and unavailability or interruption of operations. Under no
31  * circumstances will the contributor of this Program be liable for
32  * any damages of any kind arising from your use or distribution of
33  * this program.
34  */
35
36 #ifndef _UFSHCI_H
37 #define _UFSHCI_H
38
39 enum {
40         TASK_REQ_UPIU_SIZE_DWORDS       = 8,
41         TASK_RSP_UPIU_SIZE_DWORDS       = 8,
42         ALIGNED_UPIU_SIZE               = 512,
43 };
44
45 /* UFSHCI Registers */
46 enum {
47         REG_CONTROLLER_CAPABILITIES             = 0x00,
48         REG_UFS_VERSION                         = 0x08,
49         REG_CONTROLLER_DEV_ID                   = 0x10,
50         REG_CONTROLLER_PROD_ID                  = 0x14,
51         REG_AUTO_HIBERNATE_IDLE_TIMER           = 0x18,
52         REG_INTERRUPT_STATUS                    = 0x20,
53         REG_INTERRUPT_ENABLE                    = 0x24,
54         REG_CONTROLLER_STATUS                   = 0x30,
55         REG_CONTROLLER_ENABLE                   = 0x34,
56         REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER    = 0x38,
57         REG_UIC_ERROR_CODE_DATA_LINK_LAYER      = 0x3C,
58         REG_UIC_ERROR_CODE_NETWORK_LAYER        = 0x40,
59         REG_UIC_ERROR_CODE_TRANSPORT_LAYER      = 0x44,
60         REG_UIC_ERROR_CODE_DME                  = 0x48,
61         REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL    = 0x4C,
62         REG_UTP_TRANSFER_REQ_LIST_BASE_L        = 0x50,
63         REG_UTP_TRANSFER_REQ_LIST_BASE_H        = 0x54,
64         REG_UTP_TRANSFER_REQ_DOOR_BELL          = 0x58,
65         REG_UTP_TRANSFER_REQ_LIST_CLEAR         = 0x5C,
66         REG_UTP_TRANSFER_REQ_LIST_RUN_STOP      = 0x60,
67         REG_UTP_TASK_REQ_LIST_BASE_L            = 0x70,
68         REG_UTP_TASK_REQ_LIST_BASE_H            = 0x74,
69         REG_UTP_TASK_REQ_DOOR_BELL              = 0x78,
70         REG_UTP_TASK_REQ_LIST_CLEAR             = 0x7C,
71         REG_UTP_TASK_REQ_LIST_RUN_STOP          = 0x80,
72         REG_UIC_COMMAND                         = 0x90,
73         REG_UIC_COMMAND_ARG_1                   = 0x94,
74         REG_UIC_COMMAND_ARG_2                   = 0x98,
75         REG_UIC_COMMAND_ARG_3                   = 0x9C,
76
77         UFSHCI_REG_SPACE_SIZE                   = 0xA0,
78
79         REG_UFS_CCAP                            = 0x100,
80         REG_UFS_CRYPTOCAP                       = 0x104,
81
82         UFSHCI_CRYPTO_REG_SPACE_SIZE            = 0x400,
83 };
84
85 /* Controller capability masks */
86 enum {
87         MASK_TRANSFER_REQUESTS_SLOTS            = 0x0000001F,
88         MASK_TASK_MANAGEMENT_REQUEST_SLOTS      = 0x00070000,
89         MASK_64_ADDRESSING_SUPPORT              = 0x01000000,
90         MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
91         MASK_UIC_DME_TEST_MODE_SUPPORT          = 0x04000000,
92 };
93
94 #define UFS_MASK(mask, offset)          ((mask) << (offset))
95
96 /* UFS Version 08h */
97 #define MINOR_VERSION_NUM_MASK          UFS_MASK(0xFFFF, 0)
98 #define MAJOR_VERSION_NUM_MASK          UFS_MASK(0xFFFF, 16)
99
100 /* Controller UFSHCI version */
101 enum {
102         UFSHCI_VERSION_10 = 0x00010000, /* 1.0 */
103         UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */
104         UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */
105         UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */
106 };
107
108 /*
109  * HCDDID - Host Controller Identification Descriptor
110  *        - Device ID and Device Class 10h
111  */
112 #define DEVICE_CLASS    UFS_MASK(0xFFFF, 0)
113 #define DEVICE_ID       UFS_MASK(0xFF, 24)
114
115 /*
116  * HCPMID - Host Controller Identification Descriptor
117  *        - Product/Manufacturer ID  14h
118  */
119 #define MANUFACTURE_ID_MASK     UFS_MASK(0xFFFF, 0)
120 #define PRODUCT_ID_MASK         UFS_MASK(0xFFFF, 16)
121
122 #define UFS_BIT(x)      (1L << (x))
123
124 #define UTP_TRANSFER_REQ_COMPL                  UFS_BIT(0)
125 #define UIC_DME_END_PT_RESET                    UFS_BIT(1)
126 #define UIC_ERROR                               UFS_BIT(2)
127 #define UIC_TEST_MODE                           UFS_BIT(3)
128 #define UIC_POWER_MODE                          UFS_BIT(4)
129 #define UIC_HIBERNATE_EXIT                      UFS_BIT(5)
130 #define UIC_HIBERNATE_ENTER                     UFS_BIT(6)
131 #define UIC_LINK_LOST                           UFS_BIT(7)
132 #define UIC_LINK_STARTUP                        UFS_BIT(8)
133 #define UTP_TASK_REQ_COMPL                      UFS_BIT(9)
134 #define UIC_COMMAND_COMPL                       UFS_BIT(10)
135 #define DEVICE_FATAL_ERROR                      UFS_BIT(11)
136 #define CONTROLLER_FATAL_ERROR                  UFS_BIT(16)
137 #define SYSTEM_BUS_FATAL_ERROR                  UFS_BIT(17)
138
139 #define UFSHCD_UIC_PWR_MASK     (UIC_HIBERNATE_ENTER |\
140                                 UIC_HIBERNATE_EXIT |\
141                                 UIC_POWER_MODE)
142
143 #define UFSHCD_UIC_MASK         (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)
144
145 #define UFSHCD_ERROR_MASK       (UIC_ERROR |\
146                                 DEVICE_FATAL_ERROR |\
147                                 CONTROLLER_FATAL_ERROR |\
148                                 SYSTEM_BUS_FATAL_ERROR)
149
150 #define INT_FATAL_ERRORS        (DEVICE_FATAL_ERROR |\
151                                 CONTROLLER_FATAL_ERROR |\
152                                 SYSTEM_BUS_FATAL_ERROR)
153
154 /* HCS - Host Controller Status 30h */
155 #define DEVICE_PRESENT                          UFS_BIT(0)
156 #define UTP_TRANSFER_REQ_LIST_READY             UFS_BIT(1)
157 #define UTP_TASK_REQ_LIST_READY                 UFS_BIT(2)
158 #define UIC_COMMAND_READY                       UFS_BIT(3)
159 #define HOST_ERROR_INDICATOR                    UFS_BIT(4)
160 #define DEVICE_ERROR_INDICATOR                  UFS_BIT(5)
161 #define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK   UFS_MASK(0x7, 8)
162
163 #define UFSHCD_STATUS_READY     (UTP_TRANSFER_REQ_LIST_READY |\
164                                 UTP_TASK_REQ_LIST_READY |\
165                                 UIC_COMMAND_READY)
166
167 enum {
168         PWR_OK          = 0x0,
169         PWR_LOCAL       = 0x01,
170         PWR_REMOTE      = 0x02,
171         PWR_BUSY        = 0x03,
172         PWR_ERROR_CAP   = 0x04,
173         PWR_FATAL_ERROR = 0x05,
174 };
175
176 /* HCE - Host Controller Enable 34h */
177 #define CONTROLLER_ENABLE       UFS_BIT(0)
178 #define CONTROLLER_DISABLE      0x0
179 #define CRYPTO_GENERAL_ENABLE   UFS_BIT(1)
180
181 /* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
182 #define UIC_PHY_ADAPTER_LAYER_ERROR                     UFS_BIT(31)
183 #define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK           0x1F
184 #define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK             0xF
185
186 /* UECDL - Host UIC Error Code Data Link Layer 3Ch */
187 #define UIC_DATA_LINK_LAYER_ERROR               UFS_BIT(31)
188 #define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK     0x7FFF
189 #define UIC_DATA_LINK_LAYER_ERROR_PA_INIT       0x2000
190 #define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED  0x0001
191 #define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
192
193 /* UECN - Host UIC Error Code Network Layer 40h */
194 #define UIC_NETWORK_LAYER_ERROR                 UFS_BIT(31)
195 #define UIC_NETWORK_LAYER_ERROR_CODE_MASK       0x7
196
197 /* UECT - Host UIC Error Code Transport Layer 44h */
198 #define UIC_TRANSPORT_LAYER_ERROR               UFS_BIT(31)
199 #define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK     0x7F
200
201 /* UECDME - Host UIC Error Code DME 48h */
202 #define UIC_DME_ERROR                   UFS_BIT(31)
203 #define UIC_DME_ERROR_CODE_MASK         0x1
204
205 #define INT_AGGR_TIMEOUT_VAL_MASK               0xFF
206 #define INT_AGGR_COUNTER_THRESHOLD_MASK         UFS_MASK(0x1F, 8)
207 #define INT_AGGR_COUNTER_AND_TIMER_RESET        UFS_BIT(16)
208 #define INT_AGGR_STATUS_BIT                     UFS_BIT(20)
209 #define INT_AGGR_PARAM_WRITE                    UFS_BIT(24)
210 #define INT_AGGR_ENABLE                         UFS_BIT(31)
211
212 /* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
213 #define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT      UFS_BIT(0)
214
215 /* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
216 #define UTP_TASK_REQ_LIST_RUN_STOP_BIT          UFS_BIT(0)
217
218 /* UICCMD - UIC Command */
219 #define COMMAND_OPCODE_MASK             0xFF
220 #define GEN_SELECTOR_INDEX_MASK         0xFFFF
221
222 #define MIB_ATTRIBUTE_MASK              UFS_MASK(0xFFFF, 16)
223 #define RESET_LEVEL                     0xFF
224
225 #define ATTR_SET_TYPE_MASK              UFS_MASK(0xFF, 16)
226 #define CONFIG_RESULT_CODE_MASK         0xFF
227 #define GENERIC_ERROR_CODE_MASK         0xFF
228
229 /* GenSelectorIndex calculation macros for M-PHY attributes */
230 #define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
231 #define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))
232
233 #define UIC_ARG_MIB_SEL(attr, sel)      ((((attr) & 0xFFFF) << 16) |\
234                                          ((sel) & 0xFFFF))
235 #define UIC_ARG_MIB(attr)               UIC_ARG_MIB_SEL(attr, 0)
236 #define UIC_ARG_ATTR_TYPE(t)            (((t) & 0xFF) << 16)
237 #define UIC_GET_ATTR_ID(v)              (((v) >> 16) & 0xFFFF)
238
239 /* Link Status*/
240 enum link_status {
241         UFSHCD_LINK_IS_DOWN     = 1,
242         UFSHCD_LINK_IS_UP       = 2,
243 };
244
245 /* UIC Commands */
246 enum uic_cmd_dme {
247         UIC_CMD_DME_GET                 = 0x01,
248         UIC_CMD_DME_SET                 = 0x02,
249         UIC_CMD_DME_PEER_GET            = 0x03,
250         UIC_CMD_DME_PEER_SET            = 0x04,
251         UIC_CMD_DME_POWERON             = 0x10,
252         UIC_CMD_DME_POWEROFF            = 0x11,
253         UIC_CMD_DME_ENABLE              = 0x12,
254         UIC_CMD_DME_RESET               = 0x14,
255         UIC_CMD_DME_END_PT_RST          = 0x15,
256         UIC_CMD_DME_LINK_STARTUP        = 0x16,
257         UIC_CMD_DME_HIBER_ENTER         = 0x17,
258         UIC_CMD_DME_HIBER_EXIT          = 0x18,
259         UIC_CMD_DME_TEST_MODE           = 0x1A,
260 };
261
262 /* UIC Config result code / Generic error code */
263 enum {
264         UIC_CMD_RESULT_SUCCESS                  = 0x00,
265         UIC_CMD_RESULT_INVALID_ATTR             = 0x01,
266         UIC_CMD_RESULT_FAILURE                  = 0x01,
267         UIC_CMD_RESULT_INVALID_ATTR_VALUE       = 0x02,
268         UIC_CMD_RESULT_READ_ONLY_ATTR           = 0x03,
269         UIC_CMD_RESULT_WRITE_ONLY_ATTR          = 0x04,
270         UIC_CMD_RESULT_BAD_INDEX                = 0x05,
271         UIC_CMD_RESULT_LOCKED_ATTR              = 0x06,
272         UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX   = 0x07,
273         UIC_CMD_RESULT_PEER_COMM_FAILURE        = 0x08,
274         UIC_CMD_RESULT_BUSY                     = 0x09,
275         UIC_CMD_RESULT_DME_FAILURE              = 0x0A,
276 };
277
278 #define MASK_UIC_COMMAND_RESULT                 0xFF
279
280 #define INT_AGGR_COUNTER_THLD_VAL(c)    (((c) & 0x1F) << 8)
281 #define INT_AGGR_TIMEOUT_VAL(t)         (((t) & 0xFF) << 0)
282
283 /* Interrupt disable masks */
284 enum {
285         /* Interrupt disable mask for UFSHCI v1.0 */
286         INTERRUPT_MASK_ALL_VER_10       = 0x30FFF,
287         INTERRUPT_MASK_RW_VER_10        = 0x30000,
288
289         /* Interrupt disable mask for UFSHCI v1.1 */
290         INTERRUPT_MASK_ALL_VER_11       = 0x31FFF,
291
292         /* Interrupt disable mask for UFSHCI v2.1 */
293         INTERRUPT_MASK_ALL_VER_21       = 0x71FFF,
294 };
295
296 /*
297  * Request Descriptor Definitions
298  */
299
300 /* Transfer request command type */
301 enum {
302         UTP_CMD_TYPE_SCSI               = 0x0,
303         UTP_CMD_TYPE_UFS                = 0x1,
304         UTP_CMD_TYPE_DEV_MANAGE         = 0x2,
305 };
306
307 /* To accommodate UFS2.0 required Command type */
308 enum {
309         UTP_CMD_TYPE_UFS_STORAGE        = 0x1,
310 };
311
312 enum {
313         UTP_SCSI_COMMAND                = 0x00000000,
314         UTP_NATIVE_UFS_COMMAND          = 0x10000000,
315         UTP_DEVICE_MANAGEMENT_FUNCTION  = 0x20000000,
316         UTP_REQ_DESC_INT_CMD            = 0x01000000,
317 };
318
319 /* UTP Transfer Request Data Direction (DD) */
320 enum {
321         UTP_NO_DATA_TRANSFER    = 0x00000000,
322         UTP_HOST_TO_DEVICE      = 0x02000000,
323         UTP_DEVICE_TO_HOST      = 0x04000000,
324 };
325
326 /* Overall command status values */
327 enum {
328         OCS_SUCCESS                     = 0x0,
329         OCS_INVALID_CMD_TABLE_ATTR      = 0x1,
330         OCS_INVALID_PRDT_ATTR           = 0x2,
331         OCS_MISMATCH_DATA_BUF_SIZE      = 0x3,
332         OCS_MISMATCH_RESP_UPIU_SIZE     = 0x4,
333         OCS_PEER_COMM_FAILURE           = 0x5,
334         OCS_ABORTED                     = 0x6,
335         OCS_FATAL_ERROR                 = 0x7,
336         OCS_INVALID_COMMAND_STATUS      = 0x0F,
337         MASK_OCS                        = 0x0F,
338 };
339
340 /* The maximum length of the data byte count field in the PRDT is 256KB */
341 #define PRDT_DATA_BYTE_COUNT_MAX        (256 * 1024)
342 /* The granularity of the data byte count field in the PRDT is 32-bit */
343 #define PRDT_DATA_BYTE_COUNT_PAD        4
344
345 /**
346  * struct ufshcd_sg_entry - UFSHCI PRD Entry
347  * @base_addr: Lower 32bit physical address DW-0
348  * @upper_addr: Upper 32bit physical address DW-1
349  * @reserved: Reserved for future use DW-2
350  * @size: size of physical segment DW-3
351  */
352 struct ufshcd_sg_entry {
353         __le32    base_addr;
354         __le32    upper_addr;
355         __le32    reserved;
356         __le32    size;
357 };
358
359 /**
360  * struct utp_transfer_cmd_desc - UFS Command Descriptor structure
361  * @command_upiu: Command UPIU Frame address
362  * @response_upiu: Response UPIU Frame address
363  * @prd_table: Physical Region Descriptor
364  */
365 struct utp_transfer_cmd_desc {
366         u8 command_upiu[ALIGNED_UPIU_SIZE];
367         u8 response_upiu[ALIGNED_UPIU_SIZE];
368         struct ufshcd_sg_entry    prd_table[SG_ALL];
369 };
370
371 /**
372  * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
373  * @dword0: Descriptor Header DW0
374  * @dword1: Descriptor Header DW1
375  * @dword2: Descriptor Header DW2
376  * @dword3: Descriptor Header DW3
377  */
378 struct request_desc_header {
379         __le32 dword_0;
380         __le32 dword_1;
381         __le32 dword_2;
382         __le32 dword_3;
383 };
384
385 /**
386  * struct utp_transfer_req_desc - UTRD structure
387  * @header: UTRD header DW-0 to DW-3
388  * @command_desc_base_addr_lo: UCD base address low DW-4
389  * @command_desc_base_addr_hi: UCD base address high DW-5
390  * @response_upiu_length: response UPIU length DW-6
391  * @response_upiu_offset: response UPIU offset DW-6
392  * @prd_table_length: Physical region descriptor length DW-7
393  * @prd_table_offset: Physical region descriptor offset DW-7
394  */
395 struct utp_transfer_req_desc {
396
397         /* DW 0-3 */
398         struct request_desc_header header;
399
400         /* DW 4-5*/
401         __le32  command_desc_base_addr_lo;
402         __le32  command_desc_base_addr_hi;
403
404         /* DW 6 */
405         __le16  response_upiu_length;
406         __le16  response_upiu_offset;
407
408         /* DW 7 */
409         __le16  prd_table_length;
410         __le16  prd_table_offset;
411 };
412
413 /**
414  * struct utp_task_req_desc - UTMRD structure
415  * @header: UTMRD header DW-0 to DW-3
416  * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11
417  * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19
418  */
419 struct utp_task_req_desc {
420
421         /* DW 0-3 */
422         struct request_desc_header header;
423
424         /* DW 4-11 */
425         __le32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS];
426
427         /* DW 12-19 */
428         __le32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS];
429 };
430
431 #endif /* End of Header */