1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * Copyright (C) 2004 - 2010 Vladislav Bolkhovitin <vst@vlnb.net>
4 * Copyright (C) 2004 - 2005 Leonid Stoljar
5 * Copyright (C) 2006 Nathaniel Clark <nate@misrule.us>
6 * Copyright (C) 2007 - 2010 ID7 Ltd.
8 * Forward port and refactoring to modern qla2xxx and target/configfs
10 * Copyright (C) 2010-2011 Nicholas A. Bellinger <nab@kernel.org>
12 * Additional file for the target driver support.
15 * This is the global def file that is useful for including from the
19 #ifndef __QLA_TARGET_H
20 #define __QLA_TARGET_H
26 * Must be changed on any change in any initiator visible interfaces or
27 * data in the target add-on
29 #define QLA2XXX_TARGET_MAGIC 269
32 * Must be changed on any change in any target visible interfaces or
33 * data in the initiator
35 #define QLA2XXX_INITIATOR_MAGIC 57222
37 #define QLA2XXX_INI_MODE_STR_EXCLUSIVE "exclusive"
38 #define QLA2XXX_INI_MODE_STR_DISABLED "disabled"
39 #define QLA2XXX_INI_MODE_STR_ENABLED "enabled"
40 #define QLA2XXX_INI_MODE_STR_DUAL "dual"
42 #define QLA2XXX_INI_MODE_EXCLUSIVE 0
43 #define QLA2XXX_INI_MODE_DISABLED 1
44 #define QLA2XXX_INI_MODE_ENABLED 2
45 #define QLA2XXX_INI_MODE_DUAL 3
47 #define QLA2XXX_COMMAND_COUNT_INIT 250
48 #define QLA2XXX_IMMED_NOTIFY_COUNT_INIT 250
51 * Used to mark which completion handles (for RIO Status's) are for CTIO's
52 * vs. regular (non-target) info. This is checked for in
53 * qla2x00_process_response_queue() to see if a handle coming back in a
54 * multi-complete should come to the tgt driver or be handled there by qla2xxx
56 #define CTIO_COMPLETION_HANDLE_MARK BIT_29
57 #if (CTIO_COMPLETION_HANDLE_MARK <= DEFAULT_OUTSTANDING_COMMANDS)
58 #error "CTIO_COMPLETION_HANDLE_MARK not larger than "
59 "DEFAULT_OUTSTANDING_COMMANDS"
61 #define HANDLE_IS_CTIO_COMP(h) (h & CTIO_COMPLETION_HANDLE_MARK)
63 /* Used to mark CTIO as intermediate */
64 #define CTIO_INTERMEDIATE_HANDLE_MARK BIT_30
65 #define QLA_TGT_NULL_HANDLE 0
67 #define QLA_TGT_HANDLE_MASK 0xF0000000
68 #define QLA_QPID_HANDLE_MASK 0x00FF0000 /* qpair id mask */
69 #define QLA_CMD_HANDLE_MASK 0x0000FFFF
70 #define QLA_TGT_SKIP_HANDLE (0xFFFFFFFF & ~QLA_TGT_HANDLE_MASK)
72 #define QLA_QPID_HANDLE_SHIFT 16
73 #define GET_QID(_h) ((_h & QLA_QPID_HANDLE_MASK) >> QLA_QPID_HANDLE_SHIFT)
78 * ISP target entries - Flags bit definitions.
80 #define OF_SS_MODE_0 0
81 #define OF_SS_MODE_1 1
82 #define OF_SS_MODE_2 2
83 #define OF_SS_MODE_3 3
85 #define OF_EXPL_CONF BIT_5 /* Explicit Confirmation Requested */
86 #define OF_DATA_IN BIT_6 /* Data in to initiator */
87 /* (data from target to initiator) */
88 #define OF_DATA_OUT BIT_7 /* Data out from initiator */
89 /* (data from initiator to target) */
90 #define OF_NO_DATA (BIT_7 | BIT_6)
91 #define OF_INC_RC BIT_8 /* Increment command resource count */
92 #define OF_FAST_POST BIT_9 /* Enable mailbox fast posting. */
93 #define OF_CONF_REQ BIT_13 /* Confirmation Requested */
94 #define OF_TERM_EXCH BIT_14 /* Terminate exchange */
95 #define OF_SSTS BIT_15 /* Send SCSI status */
98 #ifndef QLA_TGT_DATASEGS_PER_CMD32
99 #define QLA_TGT_DATASEGS_PER_CMD32 3
100 #define QLA_TGT_DATASEGS_PER_CONT32 7
101 #define QLA_TGT_MAX_SG32(ql) \
102 (((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD32 + \
103 QLA_TGT_DATASEGS_PER_CONT32*((ql) - 1)) : 0)
105 #define QLA_TGT_DATASEGS_PER_CMD64 2
106 #define QLA_TGT_DATASEGS_PER_CONT64 5
107 #define QLA_TGT_MAX_SG64(ql) \
108 (((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD64 + \
109 QLA_TGT_DATASEGS_PER_CONT64*((ql) - 1)) : 0)
112 #ifndef QLA_TGT_DATASEGS_PER_CMD_24XX
113 #define QLA_TGT_DATASEGS_PER_CMD_24XX 1
114 #define QLA_TGT_DATASEGS_PER_CONT_24XX 5
115 #define QLA_TGT_MAX_SG_24XX(ql) \
116 (min(1270, ((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD_24XX + \
117 QLA_TGT_DATASEGS_PER_CONT_24XX*((ql) - 1)) : 0))
120 #define GET_TARGET_ID(ha, iocb) ((HAS_EXTENDED_IDS(ha)) \
121 ? le16_to_cpu((iocb)->u.isp2x.target.extended) \
122 : (uint16_t)(iocb)->u.isp2x.target.id.standard)
124 #ifndef NOTIFY_ACK_TYPE
125 #define NOTIFY_ACK_TYPE 0x0E /* Notify acknowledge entry. */
127 * ISP queue - notify acknowledge entry structure definition.
128 * This is sent to the ISP from the target driver.
131 uint8_t entry_type; /* Entry type. */
132 uint8_t entry_count; /* Entry count. */
133 uint8_t sys_define; /* System defined. */
134 uint8_t entry_status; /* Entry Status. */
137 __le32 sys_define_2; /* System defined. */
150 __le16 srr_reject_code;
151 uint8_t srr_reject_vendor_uniq;
152 uint8_t srr_reject_code_expl;
153 uint8_t reserved_2[24];
162 uint8_t status_subcode;
164 __le32 exchange_address;
168 uint8_t reserved_4[19];
170 uint8_t srr_reject_vendor_uniq;
171 uint8_t srr_reject_code_expl;
172 uint8_t srr_reject_code;
173 uint8_t reserved_5[5];
179 #define NOTIFY_ACK_FLAGS_TERMINATE BIT_3
180 #define NOTIFY_ACK_SRR_FLAGS_ACCEPT 0
181 #define NOTIFY_ACK_SRR_FLAGS_REJECT 1
183 #define NOTIFY_ACK_SRR_REJECT_REASON_UNABLE_TO_PERFORM 0x9
185 #define NOTIFY_ACK_SRR_FLAGS_REJECT_EXPL_NO_EXPL 0
186 #define NOTIFY_ACK_SRR_FLAGS_REJECT_EXPL_UNABLE_TO_SUPPLY_DATA 0x2a
188 #define NOTIFY_ACK_SUCCESS 0x01
191 #ifndef ACCEPT_TGT_IO_TYPE
192 #define ACCEPT_TGT_IO_TYPE 0x16 /* Accept target I/O entry. */
195 #ifndef CONTINUE_TGT_IO_TYPE
196 #define CONTINUE_TGT_IO_TYPE 0x17
198 * ISP queue - Continue Target I/O (CTIO) entry for status mode 0 structure.
199 * This structure is sent to the ISP 2xxx from target driver.
201 struct ctio_to_2xxx {
202 uint8_t entry_type; /* Entry type. */
203 uint8_t entry_count; /* Entry count. */
204 uint8_t sys_define; /* System defined. */
205 uint8_t entry_status; /* Entry Status. */
206 uint32_t handle; /* System defined handle */
211 __le16 timeout; /* 0 = 30 seconds, 0xFFFF = disable */
212 __le16 dseg_count; /* Data segment count. */
213 __le32 relative_offset;
215 __le16 reserved_1[3];
217 __le32 transfer_length;
220 #define ATIO_PATH_INVALID 0x07
221 #define ATIO_CANT_PROV_CAP 0x16
222 #define ATIO_CDB_VALID 0x3D
224 #define ATIO_EXEC_READ BIT_1
225 #define ATIO_EXEC_WRITE BIT_0
228 #ifndef CTIO_A64_TYPE
229 #define CTIO_A64_TYPE 0x1F
230 #define CTIO_SUCCESS 0x01
231 #define CTIO_ABORTED 0x02
232 #define CTIO_INVALID_RX_ID 0x08
233 #define CTIO_TIMEOUT 0x0B
234 #define CTIO_DIF_ERROR 0x0C /* DIF error detected */
235 #define CTIO_LIP_RESET 0x0E
236 #define CTIO_TARGET_RESET 0x17
237 #define CTIO_PORT_UNAVAILABLE 0x28
238 #define CTIO_PORT_LOGGED_OUT 0x29
239 #define CTIO_PORT_CONF_CHANGED 0x2A
240 #define CTIO_SRR_RECEIVED 0x45
243 #ifndef CTIO_RET_TYPE
244 #define CTIO_RET_TYPE 0x17 /* CTIO return entry */
245 #define ATIO_TYPE7 0x06 /* Accept target I/O entry for 24xx */
278 #define F_CTL_EXCH_CONTEXT_RESP BIT_23
279 #define F_CTL_SEQ_CONTEXT_RESIP BIT_22
280 #define F_CTL_LAST_SEQ BIT_20
281 #define F_CTL_END_SEQ BIT_19
282 #define F_CTL_SEQ_INITIATIVE BIT_16
284 #define R_CTL_BASIC_LINK_SERV 0x80
285 #define R_CTL_B_ACC 0x4
286 #define R_CTL_B_RJT 0x5
288 struct atio7_fcp_cmnd {
293 uint8_t task_mgmt_flags;
294 #define FCP_CMND_TASK_MGMT_CLEAR_ACA 6
295 #define FCP_CMND_TASK_MGMT_TARGET_RESET 5
296 #define FCP_CMND_TASK_MGMT_LU_RESET 4
297 #define FCP_CMND_TASK_MGMT_CLEAR_TASK_SET 2
298 #define FCP_CMND_TASK_MGMT_ABORT_TASK_SET 1
301 uint8_t add_cdb_len:6;
304 * add_cdb is optional and can absent from struct atio7_fcp_cmnd. Size 4
305 * only to make sizeof(struct atio7_fcp_cmnd) be as expected by
306 * BUILD_BUG_ON in qlt_init().
309 /* __le32 data_length; */
313 * ISP queue - Accept Target I/O (ATIO) type entry IOCB structure.
314 * This is sent from the ISP to the target driver.
316 struct atio_from_isp {
320 uint8_t sys_define; /* System defined. */
321 uint8_t entry_status; /* Entry Status. */
322 __le32 sys_define_2; /* System defined. */
330 uint8_t execution_codes;
331 uint8_t cdb[MAX_CMDSZ];
334 uint8_t initiator_port_name[WWN_SIZE]; /* on qla23xx */
335 __le16 reserved_32[6];
340 uint8_t fcp_cmnd_len_low;
341 uint8_t fcp_cmnd_len_high:4;
343 __le32 exchange_addr;
344 #define ATIO_EXCHANGE_ADDRESS_UNKNOWN 0xFFFFFFFF
345 struct fcp_hdr fcp_hdr;
346 struct atio7_fcp_cmnd fcp_cmnd;
349 uint8_t entry_type; /* Entry type. */
350 uint8_t entry_count; /* Entry count. */
351 __le16 attr_n_length;
352 #define FCP_CMD_LENGTH_MASK 0x0fff
353 #define FCP_CMD_LENGTH_MIN 0x38
356 #define ATIO_PROCESSED 0xDEADDEAD /* Signature */
361 static inline int fcpcmd_is_corrupted(struct atio *atio)
363 if (atio->entry_type == ATIO_TYPE7 &&
364 ((le16_to_cpu(atio->attr_n_length) & FCP_CMD_LENGTH_MASK) <
371 /* adjust corrupted atio so we won't trip over the same entry again. */
372 static inline void adjust_corrupted_atio(struct atio_from_isp *atio)
374 atio->u.raw.attr_n_length = cpu_to_le16(FCP_CMD_LENGTH_MIN);
375 atio->u.isp24.fcp_cmnd.add_cdb_len = 0;
378 static inline int get_datalen_for_atio(struct atio_from_isp *atio)
380 int len = atio->u.isp24.fcp_cmnd.add_cdb_len;
382 return get_unaligned_be32(&atio->u.isp24.fcp_cmnd.add_cdb[len * 4]);
385 #define CTIO_TYPE7 0x12 /* Continue target I/O entry (for 24xx) */
388 * ISP queue - Continue Target I/O (ATIO) type 7 entry (for 24xx) structure.
389 * This structure is sent to the ISP 24xx from the target driver.
392 struct ctio7_to_24xx {
393 uint8_t entry_type; /* Entry type. */
394 uint8_t entry_count; /* Entry count. */
395 uint8_t sys_define; /* System defined. */
396 uint8_t entry_status; /* Entry Status. */
397 uint32_t handle; /* System defined handle */
399 #define CTIO7_NHANDLE_UNRECOGNIZED 0xFFFF
401 __le16 dseg_count; /* Data segment count. */
404 le_id_t initiator_id;
406 __le32 exchange_addr;
414 __le32 relative_offset;
416 __le32 transfer_length;
428 uint8_t sense_data[24];
434 * ISP queue - CTIO type 7 from ISP 24xx to target driver
435 * returned entry structure.
437 struct ctio7_from_24xx {
438 uint8_t entry_type; /* Entry type. */
439 uint8_t entry_count; /* Entry count. */
440 uint8_t sys_define; /* System defined. */
441 uint8_t entry_status; /* Entry Status. */
442 uint32_t handle; /* System defined handle */
445 __le16 dseg_count; /* Data segment count. */
447 uint8_t reserved1[5];
448 __le32 exchange_address;
454 __le32 relative_offset;
455 uint8_t reserved4[24];
458 /* CTIO7 flags values */
459 #define CTIO7_FLAGS_SEND_STATUS BIT_15
460 #define CTIO7_FLAGS_TERMINATE BIT_14
461 #define CTIO7_FLAGS_CONFORM_REQ BIT_13
462 #define CTIO7_FLAGS_DONT_RET_CTIO BIT_8
463 #define CTIO7_FLAGS_STATUS_MODE_0 0
464 #define CTIO7_FLAGS_STATUS_MODE_1 BIT_6
465 #define CTIO7_FLAGS_STATUS_MODE_2 BIT_7
466 #define CTIO7_FLAGS_EXPLICIT_CONFORM BIT_5
467 #define CTIO7_FLAGS_CONFIRM_SATISF BIT_4
468 #define CTIO7_FLAGS_DSD_PTR BIT_2
469 #define CTIO7_FLAGS_DATA_IN BIT_1 /* data to initiator */
470 #define CTIO7_FLAGS_DATA_OUT BIT_0 /* data from initiator */
472 #define ELS_PLOGI 0x3
473 #define ELS_FLOGI 0x4
475 #define ELS_PRLI 0x20
476 #define ELS_PRLO 0x21
477 #define ELS_TPRLO 0x24
478 #define ELS_PDISC 0x50
479 #define ELS_ADISC 0x52
482 *CTIO Type CRC_2 IOCB
484 struct ctio_crc2_to_fw {
485 uint8_t entry_type; /* Entry type. */
486 #define CTIO_CRC2 0x7A
487 uint8_t entry_count; /* Entry count. */
488 uint8_t sys_define; /* System defined. */
489 uint8_t entry_status; /* Entry Status. */
491 uint32_t handle; /* System handle. */
492 __le16 nport_handle; /* N_PORT handle. */
493 __le16 timeout; /* Command timeout. */
495 __le16 dseg_count; /* Data segment count. */
497 uint8_t add_flags; /* additional flags */
498 #define CTIO_CRC2_AF_DIF_DSD_ENA BIT_3
500 le_id_t initiator_id; /* initiator ID */
502 __le32 exchange_addr; /* rcv exchange address */
504 __le16 flags; /* refer to CTIO7 flags values */
508 __le32 relative_offset;
510 __le32 transfer_length; /* total fc transfer length */
512 __le64 crc_context_address __packed; /* Data segment address. */
513 __le16 crc_context_len; /* Data segment length. */
514 __le16 reserved_1; /* MUST be set to 0. */
517 /* CTIO Type CRC_x Status IOCB */
518 struct ctio_crc_from_fw {
519 uint8_t entry_type; /* Entry type. */
520 uint8_t entry_count; /* Entry count. */
521 uint8_t sys_define; /* System defined. */
522 uint8_t entry_status; /* Entry Status. */
524 uint32_t handle; /* System handle. */
526 __le16 timeout; /* Command timeout. */
527 __le16 dseg_count; /* Data segment count. */
530 #define CTIO_CRC_SF_DIF_CHOPPED BIT_4
532 __le32 exchange_address; /* rcv exchange address */
535 __le32 resid_xfer_length;
537 uint8_t reserved3[12];
538 __le16 runt_guard; /* reported runt blk guard */
539 uint8_t actual_dif[8];
540 uint8_t expected_dif[8];
544 * ISP queue - ABTS received/response entries structure definition for 24xx.
546 #define ABTS_RECV_24XX 0x54 /* ABTS received (for 24xx) */
547 #define ABTS_RESP_24XX 0x55 /* ABTS responce (for 24xx) */
550 * ISP queue - ABTS received IOCB entry structure definition for 24xx.
551 * The ABTS BLS received from the wire is sent to the
552 * target driver by the ISP 24xx.
553 * The IOCB is placed on the response queue.
555 struct abts_recv_from_24xx {
556 uint8_t entry_type; /* Entry type. */
557 uint8_t entry_count; /* Entry count. */
558 uint8_t sys_define; /* System defined. */
559 uint8_t entry_status; /* Entry Status. */
560 uint8_t reserved_1[6];
562 uint8_t reserved_2[2];
564 uint8_t reserved_3:4;
566 __le32 exchange_address;
567 struct fcp_hdr_le fcp_hdr_le;
568 uint8_t reserved_4[16];
569 __le32 exchange_addr_to_abort;
572 #define ABTS_PARAM_ABORT_SEQ BIT_0
577 uint8_t seq_id_valid;
578 #define SEQ_ID_VALID 0x80
579 #define SEQ_ID_INVALID 0x00
590 #define BA_RJT_REASON_CODE_INVALID_COMMAND 0x1
591 #define BA_RJT_REASON_CODE_UNABLE_TO_PERFORM 0x9
596 * ISP queue - ABTS Response IOCB entry structure definition for 24xx.
597 * The ABTS response to the ABTS received is sent by the
598 * target driver to the ISP 24xx.
599 * The IOCB is placed on the request queue.
601 struct abts_resp_to_24xx {
602 uint8_t entry_type; /* Entry type. */
603 uint8_t entry_count; /* Entry count. */
604 uint8_t sys_define; /* System defined. */
605 uint8_t entry_status; /* Entry Status. */
609 __le16 control_flags;
610 #define ABTS_CONTR_FLG_TERM_EXCHG BIT_0
612 uint8_t reserved_3:4;
614 __le32 exchange_address;
615 struct fcp_hdr_le fcp_hdr_le;
617 struct ba_acc_le ba_acct;
618 struct ba_rjt_le ba_rjt;
621 __le32 exchange_addr_to_abort;
625 * ISP queue - ABTS Response IOCB from ISP24xx Firmware entry structure.
626 * The ABTS response with completion status to the ABTS response
627 * (sent by the target driver to the ISP 24xx) is sent by the
628 * ISP24xx firmware to the target driver.
629 * The IOCB is placed on the response queue.
631 struct abts_resp_from_24xx_fw {
632 uint8_t entry_type; /* Entry type. */
633 uint8_t entry_count; /* Entry count. */
634 uint8_t sys_define; /* System defined. */
635 uint8_t entry_status; /* Entry Status. */
638 #define ABTS_RESP_COMPL_SUCCESS 0
639 #define ABTS_RESP_COMPL_SUBCODE_ERROR 0x31
643 uint8_t reserved_3:4;
645 __le32 exchange_address;
646 struct fcp_hdr_le fcp_hdr_le;
647 uint8_t reserved_4[8];
648 __le32 error_subcode1;
649 #define ABTS_RESP_SUBCODE_ERR_ABORTED_EXCH_NOT_TERM 0x1E
650 __le32 error_subcode2;
651 __le32 exchange_addr_to_abort;
654 /********************************************************************\
655 * Type Definitions used by initiator & target halves
656 \********************************************************************/
658 struct qla_tgt_mgmt_cmd;
663 * This structure provides a template of function calls that the
664 * target driver (from within qla_target.c) can issue to the
665 * target module (tcm_qla2xxx).
667 struct qla_tgt_func_tmpl {
668 struct qla_tgt_cmd *(*find_cmd_by_tag)(struct fc_port *, uint64_t);
669 int (*handle_cmd)(struct scsi_qla_host *, struct qla_tgt_cmd *,
670 unsigned char *, uint32_t, int, int, int);
671 void (*handle_data)(struct qla_tgt_cmd *);
672 int (*handle_tmr)(struct qla_tgt_mgmt_cmd *, u64, uint16_t,
674 struct qla_tgt_cmd *(*get_cmd)(struct fc_port *);
675 void (*rel_cmd)(struct qla_tgt_cmd *);
676 void (*free_cmd)(struct qla_tgt_cmd *);
677 void (*free_mcmd)(struct qla_tgt_mgmt_cmd *);
678 void (*free_session)(struct fc_port *);
680 int (*check_initiator_node_acl)(struct scsi_qla_host *, unsigned char *,
682 void (*update_sess)(struct fc_port *, port_id_t, uint16_t, bool);
683 struct fc_port *(*find_sess_by_loop_id)(struct scsi_qla_host *,
685 struct fc_port *(*find_sess_by_s_id)(struct scsi_qla_host *,
687 void (*clear_nacl_from_fcport_map)(struct fc_port *);
688 void (*put_sess)(struct fc_port *);
689 void (*shutdown_sess)(struct fc_port *);
690 int (*get_dif_tags)(struct qla_tgt_cmd *cmd, uint16_t *pfw_prot_opts);
691 int (*chk_dif_tags)(uint32_t tag);
692 void (*add_target)(struct scsi_qla_host *);
693 void (*remove_target)(struct scsi_qla_host *);
696 int qla2x00_wait_for_hba_online(struct scsi_qla_host *);
698 #include <target/target_core_base.h>
700 #define QLA_TGT_TIMEOUT 10 /* in seconds */
702 #define QLA_TGT_MAX_HW_PENDING_TIME 60 /* in seconds */
704 /* Immediate notify status constants */
705 #define IMM_NTFY_LIP_RESET 0x000E
706 #define IMM_NTFY_LIP_LINK_REINIT 0x000F
707 #define IMM_NTFY_IOCB_OVERFLOW 0x0016
708 #define IMM_NTFY_ABORT_TASK 0x0020
709 #define IMM_NTFY_PORT_LOGOUT 0x0029
710 #define IMM_NTFY_PORT_CONFIG 0x002A
711 #define IMM_NTFY_GLBL_TPRLO 0x002D
712 #define IMM_NTFY_GLBL_LOGO 0x002E
713 #define IMM_NTFY_RESOURCE 0x0034
714 #define IMM_NTFY_MSG_RX 0x0036
715 #define IMM_NTFY_SRR 0x0045
716 #define IMM_NTFY_ELS 0x0046
718 /* Immediate notify task flags */
719 #define IMM_NTFY_TASK_MGMT_SHIFT 8
721 #define QLA_TGT_CLEAR_ACA 0x40
722 #define QLA_TGT_TARGET_RESET 0x20
723 #define QLA_TGT_LUN_RESET 0x10
724 #define QLA_TGT_CLEAR_TS 0x04
725 #define QLA_TGT_ABORT_TS 0x02
726 #define QLA_TGT_ABORT_ALL_SESS 0xFFFF
727 #define QLA_TGT_ABORT_ALL 0xFFFE
728 #define QLA_TGT_NEXUS_LOSS_SESS 0xFFFD
729 #define QLA_TGT_NEXUS_LOSS 0xFFFC
730 #define QLA_TGT_ABTS 0xFFFB
731 #define QLA_TGT_2G_ABORT_TASK 0xFFFA
733 /* Notify Acknowledge flags */
734 #define NOTIFY_ACK_RES_COUNT BIT_8
735 #define NOTIFY_ACK_CLEAR_LIP_RESET BIT_5
736 #define NOTIFY_ACK_TM_RESP_CODE_VALID BIT_4
738 /* Command's states */
739 #define QLA_TGT_STATE_NEW 0 /* New command + target processing */
740 #define QLA_TGT_STATE_NEED_DATA 1 /* target needs data to continue */
741 #define QLA_TGT_STATE_DATA_IN 2 /* Data arrived + target processing */
742 #define QLA_TGT_STATE_PROCESSED 3 /* target done processing */
744 /* ATIO task_codes field */
745 #define ATIO_SIMPLE_QUEUE 0
746 #define ATIO_HEAD_OF_QUEUE 1
747 #define ATIO_ORDERED_QUEUE 2
748 #define ATIO_ACA_QUEUE 4
749 #define ATIO_UNTAGGED 5
751 /* TM failed response codes, see FCP (9.4.11 FCP_RSP_INFO) */
752 #define FC_TM_SUCCESS 0
753 #define FC_TM_BAD_FCP_DATA 1
754 #define FC_TM_BAD_CMD 2
755 #define FC_TM_FCP_DATA_MISMATCH 3
756 #define FC_TM_REJECT 4
757 #define FC_TM_FAILED 5
759 #define QLA_TGT_SENSE_VALID(sense) ((sense != NULL) && \
760 (((const uint8_t *)(sense))[0] & 0x70) == 0x70)
762 struct qla_port_24xx_data {
763 uint8_t port_name[WWN_SIZE];
768 struct qla_qpair_hint {
769 struct list_head hint_elem;
770 struct qla_qpair *qpair;
776 struct scsi_qla_host *vha;
777 struct qla_hw_data *ha;
778 struct btree_head64 lun_qpair_map;
779 struct qla_qpair_hint *qphints;
781 * To sync between IRQ handlers and qlt_target_release(). Needed,
782 * because req_pkt() can drop/reaquire HW lock inside. Protected by
785 int atio_irq_cmd_count;
789 /* Target's flags, serialized by pha->hardware_lock */
790 unsigned int link_reinit_iocb_pending:1;
793 * Protected by tgt_mutex AND hardware_lock for writing and tgt_mutex
794 * OR hardware_lock for reading.
796 int tgt_stop; /* the target mode driver is being stopped */
797 int tgt_stopped; /* the target mode driver has been stopped */
799 /* Count of sessions refering qla_tgt. Protected by hardware_lock. */
802 /* Protected by hardware_lock */
803 struct list_head del_sess_list;
805 spinlock_t sess_work_lock;
806 struct list_head sess_works_list;
807 struct work_struct sess_work;
809 struct imm_ntfy_from_isp link_reinit_iocb;
810 wait_queue_head_t waitQ;
811 int notify_ack_expected;
812 int abts_resp_expected;
813 int modify_lun_expected;
814 atomic_t tgt_global_resets_count;
815 struct list_head tgt_list_entry;
818 struct qla_tgt_sess_op {
819 struct scsi_qla_host *vha;
821 struct atio_from_isp atio;
822 struct work_struct work;
823 struct list_head cmd_list;
831 TRC_DO_WORK_ERR = BIT_2,
833 TRC_XMIT_DATA = BIT_4,
834 TRC_XMIT_STATUS = BIT_5,
836 TRC_SRR_XRDY = BIT_7,
837 TRC_SRR_TERM = BIT_8,
838 TRC_SRR_CTIO = BIT_9,
840 TRC_CTIO_ERR = BIT_11,
841 TRC_CTIO_DONE = BIT_12,
842 TRC_CTIO_ABORTED = BIT_13,
843 TRC_CTIO_STRANGE = BIT_14,
844 TRC_CMD_DONE = BIT_15,
845 TRC_CMD_CHK_STOP = BIT_16,
846 TRC_CMD_FREE = BIT_17,
847 TRC_DATA_IN = BIT_18,
849 TRC_DIF_ERR = BIT_20,
854 * Do not move cmd_type field. it needs to line up with srb->cmd_type
858 struct se_cmd se_cmd;
859 struct fc_port *sess;
860 struct qla_qpair *qpair;
861 uint32_t reset_count;
863 struct work_struct work;
864 /* Sense buffer that will be mapped into outgoing status */
865 unsigned char sense_buffer[TRANSPORT_SENSE_BUFFER];
868 /* to save extra sess dereferences */
869 unsigned int conf_compl_supported:1;
870 unsigned int sg_mapped:1;
871 unsigned int free_sg:1;
872 unsigned int write_data_transferred:1;
873 unsigned int q_full:1;
874 unsigned int term_exchg:1;
875 unsigned int cmd_sent_to_fw:1;
876 unsigned int cmd_in_wq:1;
879 * This variable may be set from outside the LIO and I/O completion
880 * callback functions. Do not declare this member variable as a
881 * bitfield to avoid a read-modify-write operation when this variable
884 unsigned int aborted;
886 struct scatterlist *sg; /* cmd data buffer SG vector */
887 int sg_cnt; /* SG segments count */
888 int bufflen; /* cmd buffer length */
891 enum dma_data_direction dma_data_direction;
895 uint16_t loop_id; /* to save extra sess dereferences */
896 struct qla_tgt *tgt; /* to save extra sess dereferences */
897 struct scsi_qla_host *vha;
898 struct list_head cmd_list;
900 struct atio_from_isp atio;
902 uint8_t ctx_dsd_alloced;
905 #define DIF_ERR_NONE 0
906 #define DIF_ERR_GRD 1
907 #define DIF_ERR_REF 2
908 #define DIF_ERR_APP 3
910 struct scatterlist *prot_sg;
911 uint32_t prot_sg_cnt;
912 uint32_t blk_sz, num_blks;
913 uint8_t scsi_status, sense_key, asc, ascq;
915 struct crc_context *ctx;
918 uint16_t a_guard, e_guard, a_app_tag, e_app_tag;
919 uint32_t a_ref_tag, e_ref_tag;
920 #define DIF_BUNDL_DMA_VALID 1
923 uint64_t jiffies_at_alloc;
924 uint64_t jiffies_at_free;
926 enum trace_flags trc_flags;
929 struct qla_tgt_sess_work_param {
930 struct list_head sess_works_list_entry;
932 #define QLA_TGT_SESS_WORK_ABORT 1
933 #define QLA_TGT_SESS_WORK_TM 2
937 struct abts_recv_from_24xx abts;
938 struct imm_ntfy_from_isp tm_iocb;
939 struct atio_from_isp tm_iocb2;
943 struct qla_tgt_mgmt_cmd {
948 uint8_t abort_io_attr;
949 struct fc_port *sess;
950 struct qla_qpair *qpair;
951 struct scsi_qla_host *vha;
952 struct se_cmd se_cmd;
953 struct work_struct free_work;
955 #define QLA24XX_MGMT_SEND_NACK BIT_0
956 #define QLA24XX_MGMT_ABORT_IO_ATTR_VALID BIT_1
957 uint32_t reset_count;
958 struct work_struct work;
959 uint64_t unpacked_lun;
961 struct atio_from_isp atio;
962 struct imm_ntfy_from_isp imm_ntfy;
963 struct abts_recv_from_24xx abts;
964 } __packed orig_iocb;
968 struct qla_tgt_cmd *cmd;
971 struct scatterlist *sg; /* cmd data buffer SG vector */
972 unsigned char *sense_buffer;
976 int sense_buffer_len;
980 struct scatterlist *prot_sg;
981 uint16_t prot_seg_cnt;
985 /* Check for Switch reserved address */
986 #define IS_SW_RESV_ADDR(_s_id) \
987 ((_s_id.b.domain == 0xff) && ((_s_id.b.area & 0xf0) == 0xf0))
989 #define QLA_TGT_XMIT_DATA 1
990 #define QLA_TGT_XMIT_STATUS 2
991 #define QLA_TGT_XMIT_ALL (QLA_TGT_XMIT_STATUS|QLA_TGT_XMIT_DATA)
994 extern struct qla_tgt_data qla_target;
997 * Function prototypes for qla_target.c logic used by qla2xxx LLD code.
999 extern int qlt_add_target(struct qla_hw_data *, struct scsi_qla_host *);
1000 extern int qlt_remove_target(struct qla_hw_data *, struct scsi_qla_host *);
1001 extern int qlt_lport_register(void *, u64, u64, u64,
1002 int (*callback)(struct scsi_qla_host *, void *, u64, u64));
1003 extern void qlt_lport_deregister(struct scsi_qla_host *);
1004 extern void qlt_unreg_sess(struct fc_port *);
1005 extern void qlt_fc_port_added(struct scsi_qla_host *, fc_port_t *);
1006 extern void qlt_fc_port_deleted(struct scsi_qla_host *, fc_port_t *, int);
1007 extern int __init qlt_init(void);
1008 extern void qlt_exit(void);
1009 extern void qlt_update_vp_map(struct scsi_qla_host *, int);
1010 extern void qlt_free_session_done(struct work_struct *);
1012 * This macro is used during early initializations when host->active_mode
1013 * is not set. Right now, ha value is ignored.
1015 #define QLA_TGT_MODE_ENABLED() (ql2x_ini_mode != QLA2XXX_INI_MODE_ENABLED)
1017 extern int ql2x_ini_mode;
1019 static inline bool qla_tgt_mode_enabled(struct scsi_qla_host *ha)
1021 return ha->host->active_mode == MODE_TARGET;
1024 static inline bool qla_ini_mode_enabled(struct scsi_qla_host *ha)
1026 return ha->host->active_mode == MODE_INITIATOR;
1029 static inline bool qla_dual_mode_enabled(struct scsi_qla_host *ha)
1031 return (ha->host->active_mode == MODE_DUAL);
1034 static inline uint32_t sid_to_key(const be_id_t s_id)
1036 return s_id.domain << 16 |
1042 * Exported symbols from qla_target.c LLD logic used by qla2xxx code..
1044 extern void qlt_response_pkt_all_vps(struct scsi_qla_host *, struct rsp_que *,
1046 extern int qlt_rdy_to_xfer(struct qla_tgt_cmd *);
1047 extern int qlt_xmit_response(struct qla_tgt_cmd *, int, uint8_t);
1048 extern int qlt_abort_cmd(struct qla_tgt_cmd *);
1049 extern void qlt_xmit_tm_rsp(struct qla_tgt_mgmt_cmd *);
1050 extern void qlt_free_mcmd(struct qla_tgt_mgmt_cmd *);
1051 extern void qlt_free_cmd(struct qla_tgt_cmd *cmd);
1052 extern void qlt_async_event(uint16_t, struct scsi_qla_host *, uint16_t *);
1053 extern void qlt_enable_vha(struct scsi_qla_host *);
1054 extern void qlt_vport_create(struct scsi_qla_host *, struct qla_hw_data *);
1055 extern u8 qlt_rff_id(struct scsi_qla_host *);
1056 extern void qlt_init_atio_q_entries(struct scsi_qla_host *);
1057 extern void qlt_24xx_process_atio_queue(struct scsi_qla_host *, uint8_t);
1058 extern void qlt_24xx_config_rings(struct scsi_qla_host *);
1059 extern void qlt_24xx_config_nvram_stage1(struct scsi_qla_host *,
1060 struct nvram_24xx *);
1061 extern void qlt_24xx_config_nvram_stage2(struct scsi_qla_host *,
1062 struct init_cb_24xx *);
1063 extern void qlt_81xx_config_nvram_stage2(struct scsi_qla_host *,
1064 struct init_cb_81xx *);
1065 extern void qlt_81xx_config_nvram_stage1(struct scsi_qla_host *,
1066 struct nvram_81xx *);
1067 extern int qlt_24xx_process_response_error(struct scsi_qla_host *,
1068 struct sts_entry_24xx *);
1069 extern void qlt_modify_vp_config(struct scsi_qla_host *,
1070 struct vp_config_entry_24xx *);
1071 extern void qlt_probe_one_stage1(struct scsi_qla_host *, struct qla_hw_data *);
1072 extern int qlt_mem_alloc(struct qla_hw_data *);
1073 extern void qlt_mem_free(struct qla_hw_data *);
1074 extern int qlt_stop_phase1(struct qla_tgt *);
1075 extern void qlt_stop_phase2(struct qla_tgt *);
1076 extern irqreturn_t qla83xx_msix_atio_q(int, void *);
1077 extern void qlt_83xx_iospace_config(struct qla_hw_data *);
1078 extern int qlt_free_qfull_cmds(struct qla_qpair *);
1079 extern void qlt_logo_completion_handler(fc_port_t *, int);
1080 extern void qlt_do_generation_tick(struct scsi_qla_host *, int *);
1082 void qlt_send_resp_ctio(struct qla_qpair *, struct qla_tgt_cmd *, uint8_t,
1083 uint8_t, uint8_t, uint8_t);
1085 #endif /* __QLA_TARGET_H */