2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
4 * Copyright (c) 2008-2009 USI Co., Ltd.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
41 #include <linux/slab.h>
42 #include "pm8001_sas.h"
43 #include "pm8001_chips.h"
44 #include "pm80xx_hwi.h"
46 static ulong logging_level = PM8001_FAIL_LOGGING | PM8001_IOERR_LOGGING;
47 module_param(logging_level, ulong, 0644);
48 MODULE_PARM_DESC(logging_level, " bits for enabling logging info.");
50 static ulong link_rate = LINKRATE_15 | LINKRATE_30 | LINKRATE_60 | LINKRATE_120;
51 module_param(link_rate, ulong, 0644);
52 MODULE_PARM_DESC(link_rate, "Enable link rate.\n"
53 " 1: Link rate 1.5G\n"
54 " 2: Link rate 3.0G\n"
55 " 4: Link rate 6.0G\n"
56 " 8: Link rate 12.0G\n");
58 static struct scsi_transport_template *pm8001_stt;
59 static int pm8001_init_ccb_tag(struct pm8001_hba_info *, struct Scsi_Host *, struct pci_dev *);
62 * chip info structure to identify chip key functionality as
63 * encryption available/not, no of ports, hw specific function ref
65 static const struct pm8001_chip_info pm8001_chips[] = {
66 [chip_8001] = {0, 8, &pm8001_8001_dispatch,},
67 [chip_8008] = {0, 8, &pm8001_80xx_dispatch,},
68 [chip_8009] = {1, 8, &pm8001_80xx_dispatch,},
69 [chip_8018] = {0, 16, &pm8001_80xx_dispatch,},
70 [chip_8019] = {1, 16, &pm8001_80xx_dispatch,},
71 [chip_8074] = {0, 8, &pm8001_80xx_dispatch,},
72 [chip_8076] = {0, 16, &pm8001_80xx_dispatch,},
73 [chip_8077] = {0, 16, &pm8001_80xx_dispatch,},
74 [chip_8006] = {0, 16, &pm8001_80xx_dispatch,},
75 [chip_8070] = {0, 8, &pm8001_80xx_dispatch,},
76 [chip_8072] = {0, 16, &pm8001_80xx_dispatch,},
82 struct workqueue_struct *pm8001_wq;
85 * The main structure which LLDD must register for scsi core.
87 static struct scsi_host_template pm8001_sht = {
88 .module = THIS_MODULE,
90 .queuecommand = sas_queuecommand,
91 .dma_need_drain = ata_scsi_dma_need_drain,
92 .target_alloc = sas_target_alloc,
93 .slave_configure = sas_slave_configure,
94 .scan_finished = pm8001_scan_finished,
95 .scan_start = pm8001_scan_start,
96 .change_queue_depth = sas_change_queue_depth,
97 .bios_param = sas_bios_param,
100 .sg_tablesize = PM8001_MAX_DMA_SG,
101 .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
102 .eh_device_reset_handler = sas_eh_device_reset_handler,
103 .eh_target_reset_handler = sas_eh_target_reset_handler,
104 .slave_alloc = sas_slave_alloc,
105 .target_destroy = sas_target_destroy,
108 .compat_ioctl = sas_ioctl,
110 .shost_attrs = pm8001_host_attrs,
111 .track_queue_depth = 1,
115 * Sas layer call this function to execute specific task.
117 static struct sas_domain_function_template pm8001_transport_ops = {
118 .lldd_dev_found = pm8001_dev_found,
119 .lldd_dev_gone = pm8001_dev_gone,
121 .lldd_execute_task = pm8001_queue_command,
122 .lldd_control_phy = pm8001_phy_control,
124 .lldd_abort_task = pm8001_abort_task,
125 .lldd_abort_task_set = pm8001_abort_task_set,
126 .lldd_clear_aca = pm8001_clear_aca,
127 .lldd_clear_task_set = pm8001_clear_task_set,
128 .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset,
129 .lldd_lu_reset = pm8001_lu_reset,
130 .lldd_query_task = pm8001_query_task,
134 * pm8001_phy_init - initiate our adapter phys
135 * @pm8001_ha: our hba structure.
138 static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
140 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
141 struct asd_sas_phy *sas_phy = &phy->sas_phy;
142 phy->phy_state = PHY_LINK_DISABLE;
143 phy->pm8001_ha = pm8001_ha;
144 sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
145 sas_phy->class = SAS;
146 sas_phy->iproto = SAS_PROTOCOL_ALL;
148 sas_phy->type = PHY_TYPE_PHYSICAL;
149 sas_phy->role = PHY_ROLE_INITIATOR;
150 sas_phy->oob_mode = OOB_NOT_CONNECTED;
151 sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
152 sas_phy->id = phy_id;
153 sas_phy->sas_addr = (u8 *)&phy->dev_sas_addr;
154 sas_phy->frame_rcvd = &phy->frame_rcvd[0];
155 sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
156 sas_phy->lldd_phy = phy;
160 * pm8001_free - free hba
161 * @pm8001_ha: our hba structure.
163 static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
170 for (i = 0; i < USI_MAX_MEMCNT; i++) {
171 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
172 dma_free_coherent(&pm8001_ha->pdev->dev,
173 (pm8001_ha->memoryMap.region[i].total_len +
174 pm8001_ha->memoryMap.region[i].alignment),
175 pm8001_ha->memoryMap.region[i].virt_ptr,
176 pm8001_ha->memoryMap.region[i].phys_addr);
179 PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
180 flush_workqueue(pm8001_wq);
181 kfree(pm8001_ha->tags);
185 #ifdef PM8001_USE_TASKLET
188 * tasklet for 64 msi-x interrupt handler
189 * @opaque: the passed general host adapter struct
190 * Note: pm8001_tasklet is common for pm8001 & pm80xx
192 static void pm8001_tasklet(unsigned long opaque)
194 struct pm8001_hba_info *pm8001_ha;
195 struct isr_param *irq_vector;
197 irq_vector = (struct isr_param *)opaque;
198 pm8001_ha = irq_vector->drv_inst;
199 if (unlikely(!pm8001_ha))
201 PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
206 * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
207 * It obtains the vector number and calls the equivalent bottom
208 * half or services directly.
209 * @irq: interrupt number
210 * @opaque: the passed outbound queue/vector. Host structure is
211 * retrieved from the same.
213 static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
215 struct isr_param *irq_vector;
216 struct pm8001_hba_info *pm8001_ha;
217 irqreturn_t ret = IRQ_HANDLED;
218 irq_vector = (struct isr_param *)opaque;
219 pm8001_ha = irq_vector->drv_inst;
221 if (unlikely(!pm8001_ha))
223 if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
225 #ifdef PM8001_USE_TASKLET
226 tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
228 ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
234 * pm8001_interrupt_handler_intx - main INTx interrupt handler.
235 * @irq: interrupt number
236 * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure.
239 static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
241 struct pm8001_hba_info *pm8001_ha;
242 irqreturn_t ret = IRQ_HANDLED;
243 struct sas_ha_struct *sha = dev_id;
244 pm8001_ha = sha->lldd_ha;
245 if (unlikely(!pm8001_ha))
247 if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
250 #ifdef PM8001_USE_TASKLET
251 tasklet_schedule(&pm8001_ha->tasklet[0]);
253 ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
258 static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha);
259 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
262 * pm8001_alloc - initiate our hba structure and 6 DMAs area.
263 * @pm8001_ha: our hba structure.
264 * @ent: PCI device ID structure to match on
266 static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
267 const struct pci_device_id *ent)
269 int i, count = 0, rc = 0;
270 u32 ci_offset, ib_offset, ob_offset, pi_offset;
271 struct inbound_queue_table *circularQ;
273 spin_lock_init(&pm8001_ha->lock);
274 spin_lock_init(&pm8001_ha->bitmap_lock);
275 pm8001_dbg(pm8001_ha, INIT, "pm8001_alloc: PHY:%x\n",
276 pm8001_ha->chip->n_phy);
278 /* Setup Interrupt */
279 rc = pm8001_setup_irq(pm8001_ha);
281 pm8001_dbg(pm8001_ha, FAIL,
282 "pm8001_setup_irq failed [ret: %d]\n", rc);
285 /* Request Interrupt */
286 rc = pm8001_request_irq(pm8001_ha);
290 count = pm8001_ha->max_q_num;
291 /* Queues are chosen based on the number of cores/msix availability */
292 ib_offset = pm8001_ha->ib_offset = USI_MAX_MEMCNT_BASE;
293 ci_offset = pm8001_ha->ci_offset = ib_offset + count;
294 ob_offset = pm8001_ha->ob_offset = ci_offset + count;
295 pi_offset = pm8001_ha->pi_offset = ob_offset + count;
296 pm8001_ha->max_memcnt = pi_offset + count;
298 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
299 pm8001_phy_init(pm8001_ha, i);
300 pm8001_ha->port[i].wide_port_phymap = 0;
301 pm8001_ha->port[i].port_attached = 0;
302 pm8001_ha->port[i].port_state = 0;
303 INIT_LIST_HEAD(&pm8001_ha->port[i].list);
306 /* MPI Memory region 1 for AAP Event Log for fw */
307 pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
308 pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
309 pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
310 pm8001_ha->memoryMap.region[AAP1].alignment = 32;
312 /* MPI Memory region 2 for IOP Event Log for fw */
313 pm8001_ha->memoryMap.region[IOP].num_elements = 1;
314 pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
315 pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
316 pm8001_ha->memoryMap.region[IOP].alignment = 32;
318 for (i = 0; i < count; i++) {
319 circularQ = &pm8001_ha->inbnd_q_tbl[i];
320 spin_lock_init(&circularQ->iq_lock);
321 /* MPI Memory region 3 for consumer Index of inbound queues */
322 pm8001_ha->memoryMap.region[ci_offset+i].num_elements = 1;
323 pm8001_ha->memoryMap.region[ci_offset+i].element_size = 4;
324 pm8001_ha->memoryMap.region[ci_offset+i].total_len = 4;
325 pm8001_ha->memoryMap.region[ci_offset+i].alignment = 4;
327 if ((ent->driver_data) != chip_8001) {
328 /* MPI Memory region 5 inbound queues */
329 pm8001_ha->memoryMap.region[ib_offset+i].num_elements =
331 pm8001_ha->memoryMap.region[ib_offset+i].element_size
333 pm8001_ha->memoryMap.region[ib_offset+i].total_len =
334 PM8001_MPI_QUEUE * 128;
335 pm8001_ha->memoryMap.region[ib_offset+i].alignment
338 pm8001_ha->memoryMap.region[ib_offset+i].num_elements =
340 pm8001_ha->memoryMap.region[ib_offset+i].element_size
342 pm8001_ha->memoryMap.region[ib_offset+i].total_len =
343 PM8001_MPI_QUEUE * 64;
344 pm8001_ha->memoryMap.region[ib_offset+i].alignment = 64;
348 for (i = 0; i < count; i++) {
349 /* MPI Memory region 4 for producer Index of outbound queues */
350 pm8001_ha->memoryMap.region[pi_offset+i].num_elements = 1;
351 pm8001_ha->memoryMap.region[pi_offset+i].element_size = 4;
352 pm8001_ha->memoryMap.region[pi_offset+i].total_len = 4;
353 pm8001_ha->memoryMap.region[pi_offset+i].alignment = 4;
355 if (ent->driver_data != chip_8001) {
356 /* MPI Memory region 6 Outbound queues */
357 pm8001_ha->memoryMap.region[ob_offset+i].num_elements =
359 pm8001_ha->memoryMap.region[ob_offset+i].element_size
361 pm8001_ha->memoryMap.region[ob_offset+i].total_len =
362 PM8001_MPI_QUEUE * 128;
363 pm8001_ha->memoryMap.region[ob_offset+i].alignment
366 /* MPI Memory region 6 Outbound queues */
367 pm8001_ha->memoryMap.region[ob_offset+i].num_elements =
369 pm8001_ha->memoryMap.region[ob_offset+i].element_size
371 pm8001_ha->memoryMap.region[ob_offset+i].total_len =
372 PM8001_MPI_QUEUE * 64;
373 pm8001_ha->memoryMap.region[ob_offset+i].alignment = 64;
377 /* Memory region write DMA*/
378 pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
379 pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
380 pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
382 /* Memory region for fw flash */
383 pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
385 pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1;
386 pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
387 pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
388 pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
389 for (i = 0; i < pm8001_ha->max_memcnt; i++) {
390 if (pm8001_mem_alloc(pm8001_ha->pdev,
391 &pm8001_ha->memoryMap.region[i].virt_ptr,
392 &pm8001_ha->memoryMap.region[i].phys_addr,
393 &pm8001_ha->memoryMap.region[i].phys_addr_hi,
394 &pm8001_ha->memoryMap.region[i].phys_addr_lo,
395 pm8001_ha->memoryMap.region[i].total_len,
396 pm8001_ha->memoryMap.region[i].alignment) != 0) {
397 pm8001_dbg(pm8001_ha, FAIL,
398 "Mem%d alloc failed\n",
404 /* Memory region for devices*/
405 pm8001_ha->devices = kzalloc(PM8001_MAX_DEVICES
406 * sizeof(struct pm8001_device), GFP_KERNEL);
407 if (!pm8001_ha->devices) {
411 for (i = 0; i < PM8001_MAX_DEVICES; i++) {
412 pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
413 pm8001_ha->devices[i].id = i;
414 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
415 atomic_set(&pm8001_ha->devices[i].running_req, 0);
417 pm8001_ha->flags = PM8001F_INIT_TIME;
418 /* Initialize tags */
419 pm8001_tag_init(pm8001_ha);
423 for (i = 0; i < pm8001_ha->max_memcnt; i++) {
424 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
425 pci_free_consistent(pm8001_ha->pdev,
426 (pm8001_ha->memoryMap.region[i].total_len +
427 pm8001_ha->memoryMap.region[i].alignment),
428 pm8001_ha->memoryMap.region[i].virt_ptr,
429 pm8001_ha->memoryMap.region[i].phys_addr);
437 * pm8001_ioremap - remap the pci high physical address to kernal virtual
438 * address so that we can access them.
439 * @pm8001_ha:our hba structure.
441 static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
445 struct pci_dev *pdev;
447 pdev = pm8001_ha->pdev;
448 /* map pci mem (PMC pci base 0-3)*/
449 for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
451 ** logical BARs for SPC:
452 ** bar 0 and 1 - logical BAR0
453 ** bar 2 and 3 - logical BAR1
454 ** bar4 - logical BAR2
455 ** bar5 - logical BAR3
456 ** Skip the appropriate assignments:
458 if ((bar == 1) || (bar == 3))
460 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
461 pm8001_ha->io_mem[logicalBar].membase =
462 pci_resource_start(pdev, bar);
463 pm8001_ha->io_mem[logicalBar].memsize =
464 pci_resource_len(pdev, bar);
465 pm8001_ha->io_mem[logicalBar].memvirtaddr =
466 ioremap(pm8001_ha->io_mem[logicalBar].membase,
467 pm8001_ha->io_mem[logicalBar].memsize);
468 pm8001_dbg(pm8001_ha, INIT,
469 "PCI: bar %d, logicalBar %d\n",
471 pm8001_dbg(pm8001_ha, INIT,
472 "base addr %llx virt_addr=%llx len=%d\n",
473 (u64)pm8001_ha->io_mem[logicalBar].membase,
475 pm8001_ha->io_mem[logicalBar].memvirtaddr,
476 pm8001_ha->io_mem[logicalBar].memsize);
478 pm8001_ha->io_mem[logicalBar].membase = 0;
479 pm8001_ha->io_mem[logicalBar].memsize = 0;
480 pm8001_ha->io_mem[logicalBar].memvirtaddr = NULL;
488 * pm8001_pci_alloc - initialize our ha card structure
491 * @shost: scsi host struct which has been initialized before.
493 static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
494 const struct pci_device_id *ent,
495 struct Scsi_Host *shost)
498 struct pm8001_hba_info *pm8001_ha;
499 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
502 pm8001_ha = sha->lldd_ha;
506 pm8001_ha->pdev = pdev;
507 pm8001_ha->dev = &pdev->dev;
508 pm8001_ha->chip_id = ent->driver_data;
509 pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
510 pm8001_ha->irq = pdev->irq;
511 pm8001_ha->sas = sha;
512 pm8001_ha->shost = shost;
513 pm8001_ha->id = pm8001_id++;
514 pm8001_ha->logging_level = logging_level;
515 pm8001_ha->non_fatal_count = 0;
516 if (link_rate >= 1 && link_rate <= 15)
517 pm8001_ha->link_rate = (link_rate << 8);
519 pm8001_ha->link_rate = LINKRATE_15 | LINKRATE_30 |
520 LINKRATE_60 | LINKRATE_120;
521 pm8001_dbg(pm8001_ha, FAIL,
522 "Setting link rate to default value\n");
524 sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
525 /* IOMB size is 128 for 8088/89 controllers */
526 if (pm8001_ha->chip_id != chip_8001)
527 pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
529 pm8001_ha->iomb_size = IOMB_SIZE_SPC;
531 #ifdef PM8001_USE_TASKLET
532 /* Tasklet for non msi-x interrupt handler */
533 if ((!pdev->msix_cap || !pci_msi_enabled())
534 || (pm8001_ha->chip_id == chip_8001))
535 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
536 (unsigned long)&(pm8001_ha->irq_vector[0]));
538 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
539 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
540 (unsigned long)&(pm8001_ha->irq_vector[j]));
542 pm8001_ioremap(pm8001_ha);
543 if (!pm8001_alloc(pm8001_ha, ent))
545 pm8001_free(pm8001_ha);
550 * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
553 static int pci_go_44(struct pci_dev *pdev)
557 rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(44));
559 rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
561 dev_printk(KERN_ERR, &pdev->dev,
562 "32-bit DMA enable failed\n");
568 * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
569 * @shost: scsi host which has been allocated outside.
570 * @chip_info: our ha struct.
572 static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
573 const struct pm8001_chip_info *chip_info)
576 struct asd_sas_phy **arr_phy;
577 struct asd_sas_port **arr_port;
578 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
580 phy_nr = chip_info->n_phy;
582 memset(sha, 0x00, sizeof(*sha));
583 arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
586 arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
590 sha->sas_phy = arr_phy;
591 sha->sas_port = arr_port;
592 sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
596 shost->transportt = pm8001_stt;
597 shost->max_id = PM8001_MAX_DEVICES;
599 shost->max_channel = 0;
600 shost->unique_id = pm8001_id;
601 shost->max_cmd_len = 16;
602 shost->can_queue = PM8001_CAN_QUEUE;
603 shost->cmd_per_lun = 32;
614 * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
615 * @shost: scsi host which has been allocated outside
616 * @chip_info: our ha struct.
618 static void pm8001_post_sas_ha_init(struct Scsi_Host *shost,
619 const struct pm8001_chip_info *chip_info)
622 struct pm8001_hba_info *pm8001_ha;
623 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
625 pm8001_ha = sha->lldd_ha;
626 for (i = 0; i < chip_info->n_phy; i++) {
627 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
628 sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
629 sha->sas_phy[i]->sas_addr =
630 (u8 *)&pm8001_ha->phy[i].dev_sas_addr;
632 sha->sas_ha_name = DRV_NAME;
633 sha->dev = pm8001_ha->dev;
634 sha->strict_wide_ports = 1;
635 sha->lldd_module = THIS_MODULE;
636 sha->sas_addr = &pm8001_ha->sas_addr[0];
637 sha->num_phys = chip_info->n_phy;
638 sha->core.shost = shost;
642 * pm8001_init_sas_add - initialize sas address
643 * @pm8001_ha: our ha struct.
645 * Currently we just set the fixed SAS address to our HBA,for manufacture,
646 * it should read from the EEPROM
648 static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
652 #ifdef PM8001_READ_VPD
653 /* For new SPC controllers WWN is stored in flash vpd
654 * For SPC/SPCve controllers WWN is stored in EEPROM
655 * For Older SPC WWN is stored in NVMD
657 DECLARE_COMPLETION_ONSTACK(completion);
658 struct pm8001_ioctl_payload payload;
662 pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
663 pm8001_ha->nvmd_completion = &completion;
665 if (pm8001_ha->chip_id == chip_8001) {
666 if (deviceid == 0x8081 || deviceid == 0x0042) {
667 payload.minor_function = 4;
668 payload.rd_length = 4096;
670 payload.minor_function = 0;
671 payload.rd_length = 128;
673 } else if ((pm8001_ha->chip_id == chip_8070 ||
674 pm8001_ha->chip_id == chip_8072) &&
675 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
676 payload.minor_function = 4;
677 payload.rd_length = 4096;
679 payload.minor_function = 1;
680 payload.rd_length = 4096;
683 payload.func_specific = kzalloc(payload.rd_length, GFP_KERNEL);
684 if (!payload.func_specific) {
685 pm8001_dbg(pm8001_ha, INIT, "mem alloc fail\n");
688 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
690 kfree(payload.func_specific);
691 pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
694 wait_for_completion(&completion);
696 for (i = 0, j = 0; i <= 7; i++, j++) {
697 if (pm8001_ha->chip_id == chip_8001) {
698 if (deviceid == 0x8081)
699 pm8001_ha->sas_addr[j] =
700 payload.func_specific[0x704 + i];
701 else if (deviceid == 0x0042)
702 pm8001_ha->sas_addr[j] =
703 payload.func_specific[0x010 + i];
704 } else if ((pm8001_ha->chip_id == chip_8070 ||
705 pm8001_ha->chip_id == chip_8072) &&
706 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
707 pm8001_ha->sas_addr[j] =
708 payload.func_specific[0x010 + i];
710 pm8001_ha->sas_addr[j] =
711 payload.func_specific[0x804 + i];
713 memcpy(sas_add, pm8001_ha->sas_addr, SAS_ADDR_SIZE);
714 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
715 if (i && ((i % 4) == 0))
716 sas_add[7] = sas_add[7] + 4;
717 memcpy(&pm8001_ha->phy[i].dev_sas_addr,
718 sas_add, SAS_ADDR_SIZE);
719 pm8001_dbg(pm8001_ha, INIT, "phy %d sas_addr = %016llx\n", i,
720 pm8001_ha->phy[i].dev_sas_addr);
722 kfree(payload.func_specific);
724 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
725 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
726 pm8001_ha->phy[i].dev_sas_addr =
728 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
730 memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
736 * pm8001_get_phy_settings_info : Read phy setting values.
737 * @pm8001_ha : our hba.
739 static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
742 #ifdef PM8001_READ_VPD
743 /*OPTION ROM FLASH read for the SPC cards */
744 DECLARE_COMPLETION_ONSTACK(completion);
745 struct pm8001_ioctl_payload payload;
748 pm8001_ha->nvmd_completion = &completion;
749 /* SAS ADDRESS read from flash / EEPROM */
750 payload.minor_function = 6;
752 payload.rd_length = 4096;
753 payload.func_specific = kzalloc(4096, GFP_KERNEL);
754 if (!payload.func_specific)
756 /* Read phy setting values from flash */
757 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
759 kfree(payload.func_specific);
760 pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
763 wait_for_completion(&completion);
764 pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
765 kfree(payload.func_specific);
770 struct pm8001_mpi3_phy_pg_trx_config {
783 * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings
784 * @pm8001_ha : our adapter
785 * @phycfg : PHY config page to populate
788 void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
789 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
791 phycfg->LaneLosCfg = 0x00000132;
792 phycfg->LanePgaCfg1 = 0x00203949;
793 phycfg->LanePisoCfg1 = 0x000000FF;
794 phycfg->LanePisoCfg2 = 0xFF000001;
795 phycfg->LanePisoCfg3 = 0xE7011300;
796 phycfg->LanePisoCfg4 = 0x631C40C0;
797 phycfg->LanePisoCfg5 = 0xF8102036;
798 phycfg->LanePisoCfg6 = 0xF74A1000;
799 phycfg->LaneBctCtrl = 0x00FB33F8;
803 * pm8001_get_external_phy_settings : Retrieves the external PHY settings
804 * @pm8001_ha : our adapter
805 * @phycfg : PHY config page to populate
808 void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
809 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
811 phycfg->LaneLosCfg = 0x00000132;
812 phycfg->LanePgaCfg1 = 0x00203949;
813 phycfg->LanePisoCfg1 = 0x000000FF;
814 phycfg->LanePisoCfg2 = 0xFF000001;
815 phycfg->LanePisoCfg3 = 0xE7011300;
816 phycfg->LanePisoCfg4 = 0x63349140;
817 phycfg->LanePisoCfg5 = 0xF8102036;
818 phycfg->LanePisoCfg6 = 0xF80D9300;
819 phycfg->LaneBctCtrl = 0x00FB33F8;
823 * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext
824 * @pm8001_ha : our adapter
825 * @phymask : The PHY mask
828 void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
830 switch (pm8001_ha->pdev->subsystem_device) {
831 case 0x0070: /* H1280 - 8 external 0 internal */
832 case 0x0072: /* H12F0 - 16 external 0 internal */
836 case 0x0071: /* H1208 - 0 external 8 internal */
837 case 0x0073: /* H120F - 0 external 16 internal */
841 case 0x0080: /* H1244 - 4 external 4 internal */
845 case 0x0081: /* H1248 - 4 external 8 internal */
849 case 0x0082: /* H1288 - 8 external 8 internal */
854 pm8001_dbg(pm8001_ha, INIT,
855 "Unknown subsystem device=0x%.04x\n",
856 pm8001_ha->pdev->subsystem_device);
861 * pm8001_set_phy_settings_ven_117c_12Gb : Configure ATTO 12Gb PHY settings
862 * @pm8001_ha : our adapter
865 int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
867 struct pm8001_mpi3_phy_pg_trx_config phycfg_int;
868 struct pm8001_mpi3_phy_pg_trx_config phycfg_ext;
872 memset(&phycfg_int, 0, sizeof(phycfg_int));
873 memset(&phycfg_ext, 0, sizeof(phycfg_ext));
875 pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int);
876 pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext);
877 pm8001_get_phy_mask(pm8001_ha, &phymask);
879 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
880 if (phymask & (1 << i)) {/* Internal PHY */
881 pm8001_set_phy_profile_single(pm8001_ha, i,
882 sizeof(phycfg_int) / sizeof(u32),
885 } else { /* External PHY */
886 pm8001_set_phy_profile_single(pm8001_ha, i,
887 sizeof(phycfg_ext) / sizeof(u32),
896 * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID.
897 * @pm8001_ha : our hba.
899 static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
901 switch (pm8001_ha->pdev->subsystem_vendor) {
902 case PCI_VENDOR_ID_ATTO:
903 if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */
906 return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha);
908 case PCI_VENDOR_ID_ADAPTEC2:
913 return pm8001_get_phy_settings_info(pm8001_ha);
917 #ifdef PM8001_USE_MSIX
919 * pm8001_setup_msix - enable MSI-X interrupt
920 * @pm8001_ha: our ha struct.
922 static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
925 int rc, cpu_online_count;
926 unsigned int allocated_irq_vectors;
928 /* SPCv controllers supports 64 msi-x */
929 if (pm8001_ha->chip_id == chip_8001) {
932 number_of_intr = PM8001_MAX_MSIX_VEC;
935 cpu_online_count = num_online_cpus();
936 number_of_intr = min_t(int, cpu_online_count, number_of_intr);
937 rc = pci_alloc_irq_vectors(pm8001_ha->pdev, number_of_intr,
938 number_of_intr, PCI_IRQ_MSIX);
939 allocated_irq_vectors = rc;
943 /* Assigns the number of interrupts */
944 number_of_intr = min_t(int, allocated_irq_vectors, number_of_intr);
945 pm8001_ha->number_of_intr = number_of_intr;
947 /* Maximum queue number updating in HBA structure */
948 pm8001_ha->max_q_num = number_of_intr;
950 pm8001_dbg(pm8001_ha, INIT,
951 "pci_alloc_irq_vectors request ret:%d no of intr %d\n",
952 rc, pm8001_ha->number_of_intr);
956 static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
959 int flag = 0, rc = 0;
961 if (pm8001_ha->chip_id != chip_8001)
962 flag &= ~IRQF_SHARED;
964 pm8001_dbg(pm8001_ha, INIT,
965 "pci_enable_msix request number of intr %d\n",
966 pm8001_ha->number_of_intr);
968 for (i = 0; i < pm8001_ha->number_of_intr; i++) {
969 snprintf(pm8001_ha->intr_drvname[i],
970 sizeof(pm8001_ha->intr_drvname[0]),
971 "%s-%d", pm8001_ha->name, i);
972 pm8001_ha->irq_vector[i].irq_id = i;
973 pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
975 rc = request_irq(pci_irq_vector(pm8001_ha->pdev, i),
976 pm8001_interrupt_handler_msix, flag,
977 pm8001_ha->intr_drvname[i],
978 &(pm8001_ha->irq_vector[i]));
980 for (j = 0; j < i; j++) {
981 free_irq(pci_irq_vector(pm8001_ha->pdev, i),
982 &(pm8001_ha->irq_vector[i]));
984 pci_free_irq_vectors(pm8001_ha->pdev);
993 static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha)
995 struct pci_dev *pdev;
997 pdev = pm8001_ha->pdev;
999 #ifdef PM8001_USE_MSIX
1000 if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
1001 return pm8001_setup_msix(pm8001_ha);
1002 pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
1008 * pm8001_request_irq - register interrupt
1009 * @pm8001_ha: our ha struct.
1011 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
1013 struct pci_dev *pdev;
1016 pdev = pm8001_ha->pdev;
1018 #ifdef PM8001_USE_MSIX
1019 if (pdev->msix_cap && pci_msi_enabled())
1020 return pm8001_request_msix(pm8001_ha);
1022 pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
1028 /* initialize the INT-X interrupt */
1029 pm8001_ha->irq_vector[0].irq_id = 0;
1030 pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
1031 rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
1032 pm8001_ha->name, SHOST_TO_SAS_HA(pm8001_ha->shost));
1037 * pm8001_pci_probe - probe supported device
1038 * @pdev: pci device which kernel has been prepared for.
1039 * @ent: pci device id
1041 * This function is the main initialization function, when register a new
1042 * pci driver it is invoked, all struct an hardware initilization should be done
1043 * here, also, register interrupt
1045 static int pm8001_pci_probe(struct pci_dev *pdev,
1046 const struct pci_device_id *ent)
1051 struct pm8001_hba_info *pm8001_ha;
1052 struct Scsi_Host *shost = NULL;
1053 const struct pm8001_chip_info *chip;
1054 struct sas_ha_struct *sha;
1056 dev_printk(KERN_INFO, &pdev->dev,
1057 "pm80xx: driver version %s\n", DRV_VERSION);
1058 rc = pci_enable_device(pdev);
1060 goto err_out_enable;
1061 pci_set_master(pdev);
1063 * Enable pci slot busmaster by setting pci command register.
1064 * This is required by FW for Cyclone card.
1067 pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
1069 pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
1070 rc = pci_request_regions(pdev, DRV_NAME);
1072 goto err_out_disable;
1073 rc = pci_go_44(pdev);
1075 goto err_out_regions;
1077 shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
1080 goto err_out_regions;
1082 chip = &pm8001_chips[ent->driver_data];
1083 sha = kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
1086 goto err_out_free_host;
1088 SHOST_TO_SAS_HA(shost) = sha;
1090 rc = pm8001_prep_sas_ha_init(shost, chip);
1095 pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
1096 /* ent->driver variable is used to differentiate between controllers */
1097 pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
1103 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1104 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1106 pm8001_dbg(pm8001_ha, FAIL,
1107 "chip_init failed [ret: %d]\n", rc);
1108 goto err_out_ha_free;
1111 rc = pm8001_init_ccb_tag(pm8001_ha, shost, pdev);
1113 goto err_out_enable;
1115 rc = scsi_add_host(shost, &pdev->dev);
1117 goto err_out_ha_free;
1119 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1120 if (pm8001_ha->chip_id != chip_8001) {
1121 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1122 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1123 /* setup thermal configuration. */
1124 pm80xx_set_thermal_config(pm8001_ha);
1127 pm8001_init_sas_add(pm8001_ha);
1128 /* phy setting support for motherboard controller */
1129 rc = pm8001_configure_phy_settings(pm8001_ha);
1133 pm8001_post_sas_ha_init(shost, chip);
1134 rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
1136 pm8001_dbg(pm8001_ha, FAIL,
1137 "sas_register_ha failed [ret: %d]\n", rc);
1140 list_add_tail(&pm8001_ha->list, &hba_list);
1141 pm8001_ha->flags = PM8001F_RUN_TIME;
1142 scsi_scan_host(pm8001_ha->shost);
1146 scsi_remove_host(pm8001_ha->shost);
1148 pm8001_free(pm8001_ha);
1152 scsi_host_put(shost);
1154 pci_release_regions(pdev);
1156 pci_disable_device(pdev);
1162 * pm8001_init_ccb_tag - allocate memory to CCB and tag.
1163 * @pm8001_ha: our hba card information.
1164 * @shost: scsi host which has been allocated outside.
1167 pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha, struct Scsi_Host *shost,
1168 struct pci_dev *pdev)
1171 u32 max_out_io, ccb_count;
1174 max_out_io = pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io;
1175 ccb_count = min_t(int, PM8001_MAX_CCB, max_out_io);
1177 /* Update to the scsi host*/
1178 can_queue = ccb_count - PM8001_RESERVE_SLOT;
1179 shost->can_queue = can_queue;
1181 pm8001_ha->tags = kzalloc(ccb_count, GFP_KERNEL);
1182 if (!pm8001_ha->tags)
1185 /* Memory region for ccb_info*/
1186 pm8001_ha->ccb_info = (struct pm8001_ccb_info *)
1187 kcalloc(ccb_count, sizeof(struct pm8001_ccb_info), GFP_KERNEL);
1188 if (!pm8001_ha->ccb_info) {
1189 pm8001_dbg(pm8001_ha, FAIL,
1190 "Unable to allocate memory for ccb\n");
1193 for (i = 0; i < ccb_count; i++) {
1194 pm8001_ha->ccb_info[i].buf_prd = pci_alloc_consistent(pdev,
1195 sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG,
1196 &pm8001_ha->ccb_info[i].ccb_dma_handle);
1197 if (!pm8001_ha->ccb_info[i].buf_prd) {
1198 pm8001_dbg(pm8001_ha, FAIL,
1199 "pm80xx: ccb prd memory allocation error\n");
1202 pm8001_ha->ccb_info[i].task = NULL;
1203 pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
1204 pm8001_ha->ccb_info[i].device = NULL;
1205 ++pm8001_ha->tags_num;
1210 kfree(pm8001_ha->devices);
1215 static void pm8001_pci_remove(struct pci_dev *pdev)
1217 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1218 struct pm8001_hba_info *pm8001_ha;
1220 pm8001_ha = sha->lldd_ha;
1221 sas_unregister_ha(sha);
1222 sas_remove_host(pm8001_ha->shost);
1223 list_del(&pm8001_ha->list);
1224 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1225 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1227 #ifdef PM8001_USE_MSIX
1228 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1229 synchronize_irq(pci_irq_vector(pdev, i));
1230 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1231 free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
1232 pci_free_irq_vectors(pdev);
1234 free_irq(pm8001_ha->irq, sha);
1236 #ifdef PM8001_USE_TASKLET
1237 /* For non-msix and msix interrupts */
1238 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1239 (pm8001_ha->chip_id == chip_8001))
1240 tasklet_kill(&pm8001_ha->tasklet[0]);
1242 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1243 tasklet_kill(&pm8001_ha->tasklet[j]);
1245 scsi_host_put(pm8001_ha->shost);
1246 pm8001_free(pm8001_ha);
1247 kfree(sha->sas_phy);
1248 kfree(sha->sas_port);
1250 pci_release_regions(pdev);
1251 pci_disable_device(pdev);
1255 * pm8001_pci_suspend - power management suspend main entry point
1256 * @pdev: PCI device struct
1257 * @state: PM state change to (usually PCI_D3)
1259 * Returns 0 success, anything else error.
1261 static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
1263 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1264 struct pm8001_hba_info *pm8001_ha;
1267 pm8001_ha = sha->lldd_ha;
1268 sas_suspend_ha(sha);
1269 flush_workqueue(pm8001_wq);
1270 scsi_block_requests(pm8001_ha->shost);
1271 if (!pdev->pm_cap) {
1272 dev_err(&pdev->dev, " PCI PM not supported\n");
1275 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1276 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1277 #ifdef PM8001_USE_MSIX
1278 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1279 synchronize_irq(pci_irq_vector(pdev, i));
1280 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1281 free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
1282 pci_free_irq_vectors(pdev);
1284 free_irq(pm8001_ha->irq, sha);
1286 #ifdef PM8001_USE_TASKLET
1287 /* For non-msix and msix interrupts */
1288 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1289 (pm8001_ha->chip_id == chip_8001))
1290 tasklet_kill(&pm8001_ha->tasklet[0]);
1292 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1293 tasklet_kill(&pm8001_ha->tasklet[j]);
1295 device_state = pci_choose_state(pdev, state);
1296 pm8001_printk("pdev=0x%p, slot=%s, entering "
1297 "operating state [D%d]\n", pdev,
1298 pm8001_ha->name, device_state);
1299 pci_save_state(pdev);
1300 pci_disable_device(pdev);
1301 pci_set_power_state(pdev, device_state);
1306 * pm8001_pci_resume - power management resume main entry point
1307 * @pdev: PCI device struct
1309 * Returns 0 success, anything else error.
1311 static int pm8001_pci_resume(struct pci_dev *pdev)
1313 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1314 struct pm8001_hba_info *pm8001_ha;
1318 DECLARE_COMPLETION_ONSTACK(completion);
1319 pm8001_ha = sha->lldd_ha;
1320 device_state = pdev->current_state;
1322 pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
1323 "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
1325 pci_set_power_state(pdev, PCI_D0);
1326 pci_enable_wake(pdev, PCI_D0, 0);
1327 pci_restore_state(pdev);
1328 rc = pci_enable_device(pdev);
1330 pm8001_printk("slot=%s Enable device failed during resume\n",
1332 goto err_out_enable;
1335 pci_set_master(pdev);
1336 rc = pci_go_44(pdev);
1338 goto err_out_disable;
1339 sas_prep_resume_ha(sha);
1340 /* chip soft rst only for spc */
1341 if (pm8001_ha->chip_id == chip_8001) {
1342 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1343 pm8001_dbg(pm8001_ha, INIT, "chip soft reset successful\n");
1345 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1347 goto err_out_disable;
1349 /* disable all the interrupt bits */
1350 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1352 rc = pm8001_request_irq(pm8001_ha);
1354 goto err_out_disable;
1355 #ifdef PM8001_USE_TASKLET
1356 /* Tasklet for non msi-x interrupt handler */
1357 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1358 (pm8001_ha->chip_id == chip_8001))
1359 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
1360 (unsigned long)&(pm8001_ha->irq_vector[0]));
1362 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1363 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
1364 (unsigned long)&(pm8001_ha->irq_vector[j]));
1366 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1367 if (pm8001_ha->chip_id != chip_8001) {
1368 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1369 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1372 /* Chip documentation for the 8070 and 8072 SPCv */
1373 /* states that a 500ms minimum delay is required */
1374 /* before issuing commands. Otherwise, the firmware */
1375 /* will enter an unrecoverable state. */
1377 if (pm8001_ha->chip_id == chip_8070 ||
1378 pm8001_ha->chip_id == chip_8072) {
1382 /* Spin up the PHYs */
1384 pm8001_ha->flags = PM8001F_RUN_TIME;
1385 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
1386 pm8001_ha->phy[i].enable_completion = &completion;
1387 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
1388 wait_for_completion(&completion);
1394 scsi_remove_host(pm8001_ha->shost);
1395 pci_disable_device(pdev);
1400 /* update of pci device, vendor id and driver data with
1401 * unique value for each of the controller
1403 static struct pci_device_id pm8001_pci_table[] = {
1404 { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
1405 { PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 },
1406 { PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 },
1407 { PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
1408 /* Support for SPC/SPCv/SPCve controllers */
1409 { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
1410 { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
1411 { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
1412 { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
1413 { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
1414 { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
1415 { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
1416 { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
1417 { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
1418 { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
1419 { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
1420 { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
1421 { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
1422 { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
1423 { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
1424 { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1425 PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
1426 { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1427 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
1428 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1429 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
1430 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1431 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
1432 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1433 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
1434 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1435 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
1436 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1437 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
1438 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1439 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
1440 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1441 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
1442 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1443 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
1444 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1445 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
1446 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1447 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
1448 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1449 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
1450 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1451 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
1452 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1453 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
1454 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1455 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
1456 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1457 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
1458 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1459 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
1460 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1461 PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
1462 { PCI_VENDOR_ID_ATTO, 0x8070,
1463 PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 },
1464 { PCI_VENDOR_ID_ATTO, 0x8070,
1465 PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 },
1466 { PCI_VENDOR_ID_ATTO, 0x8072,
1467 PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 },
1468 { PCI_VENDOR_ID_ATTO, 0x8072,
1469 PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 },
1470 { PCI_VENDOR_ID_ATTO, 0x8070,
1471 PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 },
1472 { PCI_VENDOR_ID_ATTO, 0x8072,
1473 PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 },
1474 { PCI_VENDOR_ID_ATTO, 0x8072,
1475 PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 },
1476 {} /* terminate list */
1479 static struct pci_driver pm8001_pci_driver = {
1481 .id_table = pm8001_pci_table,
1482 .probe = pm8001_pci_probe,
1483 .remove = pm8001_pci_remove,
1484 .suspend = pm8001_pci_suspend,
1485 .resume = pm8001_pci_resume,
1489 * pm8001_init - initialize scsi transport template
1491 static int __init pm8001_init(void)
1495 pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
1500 pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
1503 rc = pci_register_driver(&pm8001_pci_driver);
1509 sas_release_transport(pm8001_stt);
1511 destroy_workqueue(pm8001_wq);
1516 static void __exit pm8001_exit(void)
1518 pci_unregister_driver(&pm8001_pci_driver);
1519 sas_release_transport(pm8001_stt);
1520 destroy_workqueue(pm8001_wq);
1523 module_init(pm8001_init);
1524 module_exit(pm8001_exit);
1526 MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
1527 MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
1528 MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
1529 MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
1531 "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 "
1532 "SAS/SATA controller driver");
1533 MODULE_VERSION(DRV_VERSION);
1534 MODULE_LICENSE("GPL");
1535 MODULE_DEVICE_TABLE(pci, pm8001_pci_table);