2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
4 * Copyright (c) 2008-2009 USI Co., Ltd.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
41 #include <linux/slab.h>
42 #include "pm8001_sas.h"
43 #include "pm8001_chips.h"
45 static struct scsi_transport_template *pm8001_stt;
48 * chip info structure to identify chip key functionality as
49 * encryption available/not, no of ports, hw specific function ref
51 static const struct pm8001_chip_info pm8001_chips[] = {
52 [chip_8001] = {0, 8, &pm8001_8001_dispatch,},
53 [chip_8008] = {0, 8, &pm8001_80xx_dispatch,},
54 [chip_8009] = {1, 8, &pm8001_80xx_dispatch,},
55 [chip_8018] = {0, 16, &pm8001_80xx_dispatch,},
56 [chip_8019] = {1, 16, &pm8001_80xx_dispatch,},
57 [chip_8074] = {0, 8, &pm8001_80xx_dispatch,},
58 [chip_8076] = {0, 16, &pm8001_80xx_dispatch,},
59 [chip_8077] = {0, 16, &pm8001_80xx_dispatch,},
60 [chip_8006] = {0, 16, &pm8001_80xx_dispatch,},
61 [chip_8070] = {0, 8, &pm8001_80xx_dispatch,},
62 [chip_8072] = {0, 16, &pm8001_80xx_dispatch,},
68 struct workqueue_struct *pm8001_wq;
71 * The main structure which LLDD must register for scsi core.
73 static struct scsi_host_template pm8001_sht = {
74 .module = THIS_MODULE,
76 .queuecommand = sas_queuecommand,
77 .target_alloc = sas_target_alloc,
78 .slave_configure = sas_slave_configure,
79 .scan_finished = pm8001_scan_finished,
80 .scan_start = pm8001_scan_start,
81 .change_queue_depth = sas_change_queue_depth,
82 .bios_param = sas_bios_param,
85 .sg_tablesize = SG_ALL,
86 .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
87 .use_clustering = ENABLE_CLUSTERING,
88 .eh_device_reset_handler = sas_eh_device_reset_handler,
89 .eh_target_reset_handler = sas_eh_target_reset_handler,
90 .target_destroy = sas_target_destroy,
92 .shost_attrs = pm8001_host_attrs,
93 .track_queue_depth = 1,
97 * Sas layer call this function to execute specific task.
99 static struct sas_domain_function_template pm8001_transport_ops = {
100 .lldd_dev_found = pm8001_dev_found,
101 .lldd_dev_gone = pm8001_dev_gone,
103 .lldd_execute_task = pm8001_queue_command,
104 .lldd_control_phy = pm8001_phy_control,
106 .lldd_abort_task = pm8001_abort_task,
107 .lldd_abort_task_set = pm8001_abort_task_set,
108 .lldd_clear_aca = pm8001_clear_aca,
109 .lldd_clear_task_set = pm8001_clear_task_set,
110 .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset,
111 .lldd_lu_reset = pm8001_lu_reset,
112 .lldd_query_task = pm8001_query_task,
116 *pm8001_phy_init - initiate our adapter phys
117 *@pm8001_ha: our hba structure.
120 static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
122 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
123 struct asd_sas_phy *sas_phy = &phy->sas_phy;
125 phy->pm8001_ha = pm8001_ha;
126 sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
127 sas_phy->class = SAS;
128 sas_phy->iproto = SAS_PROTOCOL_ALL;
130 sas_phy->type = PHY_TYPE_PHYSICAL;
131 sas_phy->role = PHY_ROLE_INITIATOR;
132 sas_phy->oob_mode = OOB_NOT_CONNECTED;
133 sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
134 sas_phy->id = phy_id;
135 sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
136 sas_phy->frame_rcvd = &phy->frame_rcvd[0];
137 sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
138 sas_phy->lldd_phy = phy;
142 *pm8001_free - free hba
143 *@pm8001_ha: our hba structure.
146 static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
153 for (i = 0; i < USI_MAX_MEMCNT; i++) {
154 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
155 pci_free_consistent(pm8001_ha->pdev,
156 (pm8001_ha->memoryMap.region[i].total_len +
157 pm8001_ha->memoryMap.region[i].alignment),
158 pm8001_ha->memoryMap.region[i].virt_ptr,
159 pm8001_ha->memoryMap.region[i].phys_addr);
162 PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
163 flush_workqueue(pm8001_wq);
164 kfree(pm8001_ha->tags);
168 #ifdef PM8001_USE_TASKLET
171 * tasklet for 64 msi-x interrupt handler
172 * @opaque: the passed general host adapter struct
173 * Note: pm8001_tasklet is common for pm8001 & pm80xx
175 static void pm8001_tasklet(unsigned long opaque)
177 struct pm8001_hba_info *pm8001_ha;
178 struct isr_param *irq_vector;
180 irq_vector = (struct isr_param *)opaque;
181 pm8001_ha = irq_vector->drv_inst;
182 if (unlikely(!pm8001_ha))
184 PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
189 * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
190 * It obtains the vector number and calls the equivalent bottom
191 * half or services directly.
192 * @opaque: the passed outbound queue/vector. Host structure is
193 * retrieved from the same.
195 static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
197 struct isr_param *irq_vector;
198 struct pm8001_hba_info *pm8001_ha;
199 irqreturn_t ret = IRQ_HANDLED;
200 irq_vector = (struct isr_param *)opaque;
201 pm8001_ha = irq_vector->drv_inst;
203 if (unlikely(!pm8001_ha))
205 if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
207 #ifdef PM8001_USE_TASKLET
208 tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
210 ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
216 * pm8001_interrupt_handler_intx - main INTx interrupt handler.
217 * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure.
220 static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
222 struct pm8001_hba_info *pm8001_ha;
223 irqreturn_t ret = IRQ_HANDLED;
224 struct sas_ha_struct *sha = dev_id;
225 pm8001_ha = sha->lldd_ha;
226 if (unlikely(!pm8001_ha))
228 if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
231 #ifdef PM8001_USE_TASKLET
232 tasklet_schedule(&pm8001_ha->tasklet[0]);
234 ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
240 * pm8001_alloc - initiate our hba structure and 6 DMAs area.
241 * @pm8001_ha:our hba structure.
244 static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
245 const struct pci_device_id *ent)
248 spin_lock_init(&pm8001_ha->lock);
249 spin_lock_init(&pm8001_ha->bitmap_lock);
250 PM8001_INIT_DBG(pm8001_ha,
251 pm8001_printk("pm8001_alloc: PHY:%x\n",
252 pm8001_ha->chip->n_phy));
253 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
254 pm8001_phy_init(pm8001_ha, i);
255 pm8001_ha->port[i].wide_port_phymap = 0;
256 pm8001_ha->port[i].port_attached = 0;
257 pm8001_ha->port[i].port_state = 0;
258 INIT_LIST_HEAD(&pm8001_ha->port[i].list);
261 pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
262 if (!pm8001_ha->tags)
264 /* MPI Memory region 1 for AAP Event Log for fw */
265 pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
266 pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
267 pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
268 pm8001_ha->memoryMap.region[AAP1].alignment = 32;
270 /* MPI Memory region 2 for IOP Event Log for fw */
271 pm8001_ha->memoryMap.region[IOP].num_elements = 1;
272 pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
273 pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
274 pm8001_ha->memoryMap.region[IOP].alignment = 32;
276 for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
277 /* MPI Memory region 3 for consumer Index of inbound queues */
278 pm8001_ha->memoryMap.region[CI+i].num_elements = 1;
279 pm8001_ha->memoryMap.region[CI+i].element_size = 4;
280 pm8001_ha->memoryMap.region[CI+i].total_len = 4;
281 pm8001_ha->memoryMap.region[CI+i].alignment = 4;
283 if ((ent->driver_data) != chip_8001) {
284 /* MPI Memory region 5 inbound queues */
285 pm8001_ha->memoryMap.region[IB+i].num_elements =
287 pm8001_ha->memoryMap.region[IB+i].element_size = 128;
288 pm8001_ha->memoryMap.region[IB+i].total_len =
289 PM8001_MPI_QUEUE * 128;
290 pm8001_ha->memoryMap.region[IB+i].alignment = 128;
292 pm8001_ha->memoryMap.region[IB+i].num_elements =
294 pm8001_ha->memoryMap.region[IB+i].element_size = 64;
295 pm8001_ha->memoryMap.region[IB+i].total_len =
296 PM8001_MPI_QUEUE * 64;
297 pm8001_ha->memoryMap.region[IB+i].alignment = 64;
301 for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
302 /* MPI Memory region 4 for producer Index of outbound queues */
303 pm8001_ha->memoryMap.region[PI+i].num_elements = 1;
304 pm8001_ha->memoryMap.region[PI+i].element_size = 4;
305 pm8001_ha->memoryMap.region[PI+i].total_len = 4;
306 pm8001_ha->memoryMap.region[PI+i].alignment = 4;
308 if (ent->driver_data != chip_8001) {
309 /* MPI Memory region 6 Outbound queues */
310 pm8001_ha->memoryMap.region[OB+i].num_elements =
312 pm8001_ha->memoryMap.region[OB+i].element_size = 128;
313 pm8001_ha->memoryMap.region[OB+i].total_len =
314 PM8001_MPI_QUEUE * 128;
315 pm8001_ha->memoryMap.region[OB+i].alignment = 128;
317 /* MPI Memory region 6 Outbound queues */
318 pm8001_ha->memoryMap.region[OB+i].num_elements =
320 pm8001_ha->memoryMap.region[OB+i].element_size = 64;
321 pm8001_ha->memoryMap.region[OB+i].total_len =
322 PM8001_MPI_QUEUE * 64;
323 pm8001_ha->memoryMap.region[OB+i].alignment = 64;
327 /* Memory region write DMA*/
328 pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
329 pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
330 pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
331 /* Memory region for devices*/
332 pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
333 pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
334 sizeof(struct pm8001_device);
335 pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
336 sizeof(struct pm8001_device);
338 /* Memory region for ccb_info*/
339 pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
340 pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
341 sizeof(struct pm8001_ccb_info);
342 pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
343 sizeof(struct pm8001_ccb_info);
345 /* Memory region for fw flash */
346 pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
348 pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1;
349 pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
350 pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
351 pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
352 for (i = 0; i < USI_MAX_MEMCNT; i++) {
353 if (pm8001_mem_alloc(pm8001_ha->pdev,
354 &pm8001_ha->memoryMap.region[i].virt_ptr,
355 &pm8001_ha->memoryMap.region[i].phys_addr,
356 &pm8001_ha->memoryMap.region[i].phys_addr_hi,
357 &pm8001_ha->memoryMap.region[i].phys_addr_lo,
358 pm8001_ha->memoryMap.region[i].total_len,
359 pm8001_ha->memoryMap.region[i].alignment) != 0) {
360 PM8001_FAIL_DBG(pm8001_ha,
361 pm8001_printk("Mem%d alloc failed\n",
367 pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
368 for (i = 0; i < PM8001_MAX_DEVICES; i++) {
369 pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
370 pm8001_ha->devices[i].id = i;
371 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
372 pm8001_ha->devices[i].running_req = 0;
374 pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
375 for (i = 0; i < PM8001_MAX_CCB; i++) {
376 pm8001_ha->ccb_info[i].ccb_dma_handle =
377 pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
378 i * sizeof(struct pm8001_ccb_info);
379 pm8001_ha->ccb_info[i].task = NULL;
380 pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
381 pm8001_ha->ccb_info[i].device = NULL;
382 ++pm8001_ha->tags_num;
384 pm8001_ha->flags = PM8001F_INIT_TIME;
385 /* Initialize tags */
386 pm8001_tag_init(pm8001_ha);
393 * pm8001_ioremap - remap the pci high physical address to kernal virtual
394 * address so that we can access them.
395 * @pm8001_ha:our hba structure.
397 static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
401 struct pci_dev *pdev;
403 pdev = pm8001_ha->pdev;
404 /* map pci mem (PMC pci base 0-3)*/
405 for (bar = 0; bar < 6; bar++) {
407 ** logical BARs for SPC:
408 ** bar 0 and 1 - logical BAR0
409 ** bar 2 and 3 - logical BAR1
410 ** bar4 - logical BAR2
411 ** bar5 - logical BAR3
412 ** Skip the appropriate assignments:
414 if ((bar == 1) || (bar == 3))
416 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
417 pm8001_ha->io_mem[logicalBar].membase =
418 pci_resource_start(pdev, bar);
419 pm8001_ha->io_mem[logicalBar].memsize =
420 pci_resource_len(pdev, bar);
421 pm8001_ha->io_mem[logicalBar].memvirtaddr =
422 ioremap(pm8001_ha->io_mem[logicalBar].membase,
423 pm8001_ha->io_mem[logicalBar].memsize);
424 PM8001_INIT_DBG(pm8001_ha,
425 pm8001_printk("PCI: bar %d, logicalBar %d ",
427 PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
428 "base addr %llx virt_addr=%llx len=%d\n",
429 (u64)pm8001_ha->io_mem[logicalBar].membase,
431 pm8001_ha->io_mem[logicalBar].memvirtaddr,
432 pm8001_ha->io_mem[logicalBar].memsize));
434 pm8001_ha->io_mem[logicalBar].membase = 0;
435 pm8001_ha->io_mem[logicalBar].memsize = 0;
436 pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
444 * pm8001_pci_alloc - initialize our ha card structure
447 * @shost: scsi host struct which has been initialized before.
449 static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
450 const struct pci_device_id *ent,
451 struct Scsi_Host *shost)
454 struct pm8001_hba_info *pm8001_ha;
455 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
458 pm8001_ha = sha->lldd_ha;
462 pm8001_ha->pdev = pdev;
463 pm8001_ha->dev = &pdev->dev;
464 pm8001_ha->chip_id = ent->driver_data;
465 pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
466 pm8001_ha->irq = pdev->irq;
467 pm8001_ha->sas = sha;
468 pm8001_ha->shost = shost;
469 pm8001_ha->id = pm8001_id++;
470 pm8001_ha->logging_level = 0x01;
471 sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
472 /* IOMB size is 128 for 8088/89 controllers */
473 if (pm8001_ha->chip_id != chip_8001)
474 pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
476 pm8001_ha->iomb_size = IOMB_SIZE_SPC;
478 #ifdef PM8001_USE_TASKLET
479 /* Tasklet for non msi-x interrupt handler */
480 if ((!pdev->msix_cap || !pci_msi_enabled())
481 || (pm8001_ha->chip_id == chip_8001))
482 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
483 (unsigned long)&(pm8001_ha->irq_vector[0]));
485 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
486 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
487 (unsigned long)&(pm8001_ha->irq_vector[j]));
489 pm8001_ioremap(pm8001_ha);
490 if (!pm8001_alloc(pm8001_ha, ent))
492 pm8001_free(pm8001_ha);
497 * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
500 static int pci_go_44(struct pci_dev *pdev)
504 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
505 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
507 rc = pci_set_consistent_dma_mask(pdev,
510 dev_printk(KERN_ERR, &pdev->dev,
511 "44-bit DMA enable failed\n");
516 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
518 dev_printk(KERN_ERR, &pdev->dev,
519 "32-bit DMA enable failed\n");
522 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
524 dev_printk(KERN_ERR, &pdev->dev,
525 "32-bit consistent DMA enable failed\n");
533 * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
534 * @shost: scsi host which has been allocated outside.
535 * @chip_info: our ha struct.
537 static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
538 const struct pm8001_chip_info *chip_info)
541 struct asd_sas_phy **arr_phy;
542 struct asd_sas_port **arr_port;
543 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
545 phy_nr = chip_info->n_phy;
547 memset(sha, 0x00, sizeof(*sha));
548 arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
551 arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
555 sha->sas_phy = arr_phy;
556 sha->sas_port = arr_port;
557 sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
561 shost->transportt = pm8001_stt;
562 shost->max_id = PM8001_MAX_DEVICES;
564 shost->max_channel = 0;
565 shost->unique_id = pm8001_id;
566 shost->max_cmd_len = 16;
567 shost->can_queue = PM8001_CAN_QUEUE;
568 shost->cmd_per_lun = 32;
579 * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
580 * @shost: scsi host which has been allocated outside
581 * @chip_info: our ha struct.
583 static void pm8001_post_sas_ha_init(struct Scsi_Host *shost,
584 const struct pm8001_chip_info *chip_info)
587 struct pm8001_hba_info *pm8001_ha;
588 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
590 pm8001_ha = sha->lldd_ha;
591 for (i = 0; i < chip_info->n_phy; i++) {
592 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
593 sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
595 sha->sas_ha_name = DRV_NAME;
596 sha->dev = pm8001_ha->dev;
598 sha->lldd_module = THIS_MODULE;
599 sha->sas_addr = &pm8001_ha->sas_addr[0];
600 sha->num_phys = chip_info->n_phy;
601 sha->core.shost = shost;
605 * pm8001_init_sas_add - initialize sas address
606 * @chip_info: our ha struct.
608 * Currently we just set the fixed SAS address to our HBA,for manufacture,
609 * it should read from the EEPROM
611 static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
614 #ifdef PM8001_READ_VPD
615 /* For new SPC controllers WWN is stored in flash vpd
616 * For SPC/SPCve controllers WWN is stored in EEPROM
617 * For Older SPC WWN is stored in NVMD
619 DECLARE_COMPLETION_ONSTACK(completion);
620 struct pm8001_ioctl_payload payload;
624 pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
625 pm8001_ha->nvmd_completion = &completion;
627 if (pm8001_ha->chip_id == chip_8001) {
628 if (deviceid == 0x8081 || deviceid == 0x0042) {
629 payload.minor_function = 4;
630 payload.length = 4096;
632 payload.minor_function = 0;
633 payload.length = 128;
635 } else if ((pm8001_ha->chip_id == chip_8070 ||
636 pm8001_ha->chip_id == chip_8072) &&
637 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
638 payload.minor_function = 4;
639 payload.length = 4096;
641 payload.minor_function = 1;
642 payload.length = 4096;
645 payload.func_specific = kzalloc(payload.length, GFP_KERNEL);
646 if (!payload.func_specific) {
647 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("mem alloc fail\n"));
650 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
652 kfree(payload.func_specific);
653 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
656 wait_for_completion(&completion);
658 for (i = 0, j = 0; i <= 7; i++, j++) {
659 if (pm8001_ha->chip_id == chip_8001) {
660 if (deviceid == 0x8081)
661 pm8001_ha->sas_addr[j] =
662 payload.func_specific[0x704 + i];
663 else if (deviceid == 0x0042)
664 pm8001_ha->sas_addr[j] =
665 payload.func_specific[0x010 + i];
666 } else if ((pm8001_ha->chip_id == chip_8070 ||
667 pm8001_ha->chip_id == chip_8072) &&
668 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
669 pm8001_ha->sas_addr[j] =
670 payload.func_specific[0x010 + i];
672 pm8001_ha->sas_addr[j] =
673 payload.func_specific[0x804 + i];
676 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
677 memcpy(&pm8001_ha->phy[i].dev_sas_addr,
678 pm8001_ha->sas_addr, SAS_ADDR_SIZE);
679 PM8001_INIT_DBG(pm8001_ha,
680 pm8001_printk("phy %d sas_addr = %016llx\n", i,
681 pm8001_ha->phy[i].dev_sas_addr));
683 kfree(payload.func_specific);
685 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
686 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
687 pm8001_ha->phy[i].dev_sas_addr =
689 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
691 memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
697 * pm8001_get_phy_settings_info : Read phy setting values.
698 * @pm8001_ha : our hba.
700 static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
703 #ifdef PM8001_READ_VPD
704 /*OPTION ROM FLASH read for the SPC cards */
705 DECLARE_COMPLETION_ONSTACK(completion);
706 struct pm8001_ioctl_payload payload;
709 pm8001_ha->nvmd_completion = &completion;
710 /* SAS ADDRESS read from flash / EEPROM */
711 payload.minor_function = 6;
713 payload.length = 4096;
714 payload.func_specific = kzalloc(4096, GFP_KERNEL);
715 if (!payload.func_specific)
717 /* Read phy setting values from flash */
718 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
720 kfree(payload.func_specific);
721 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
724 wait_for_completion(&completion);
725 pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
726 kfree(payload.func_specific);
731 struct pm8001_mpi3_phy_pg_trx_config {
744 * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings
745 * @pm8001_ha : our adapter
746 * @phycfg : PHY config page to populate
749 void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
750 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
752 phycfg->LaneLosCfg = 0x00000132;
753 phycfg->LanePgaCfg1 = 0x00203949;
754 phycfg->LanePisoCfg1 = 0x000000FF;
755 phycfg->LanePisoCfg2 = 0xFF000001;
756 phycfg->LanePisoCfg3 = 0xE7011300;
757 phycfg->LanePisoCfg4 = 0x631C40C0;
758 phycfg->LanePisoCfg5 = 0xF8102036;
759 phycfg->LanePisoCfg6 = 0xF74A1000;
760 phycfg->LaneBctCtrl = 0x00FB33F8;
764 * pm8001_get_external_phy_settings : Retrieves the external PHY settings
765 * @pm8001_ha : our adapter
766 * @phycfg : PHY config page to populate
769 void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
770 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
772 phycfg->LaneLosCfg = 0x00000132;
773 phycfg->LanePgaCfg1 = 0x00203949;
774 phycfg->LanePisoCfg1 = 0x000000FF;
775 phycfg->LanePisoCfg2 = 0xFF000001;
776 phycfg->LanePisoCfg3 = 0xE7011300;
777 phycfg->LanePisoCfg4 = 0x63349140;
778 phycfg->LanePisoCfg5 = 0xF8102036;
779 phycfg->LanePisoCfg6 = 0xF80D9300;
780 phycfg->LaneBctCtrl = 0x00FB33F8;
784 * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext
785 * @pm8001_ha : our adapter
786 * @phymask : The PHY mask
789 void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
791 switch (pm8001_ha->pdev->subsystem_device) {
792 case 0x0070: /* H1280 - 8 external 0 internal */
793 case 0x0072: /* H12F0 - 16 external 0 internal */
797 case 0x0071: /* H1208 - 0 external 8 internal */
798 case 0x0073: /* H120F - 0 external 16 internal */
802 case 0x0080: /* H1244 - 4 external 4 internal */
806 case 0x0081: /* H1248 - 4 external 8 internal */
810 case 0x0082: /* H1288 - 8 external 8 internal */
815 PM8001_INIT_DBG(pm8001_ha,
816 pm8001_printk("Unknown subsystem device=0x%.04x",
817 pm8001_ha->pdev->subsystem_device));
822 * pm8001_set_phy_settings_ven_117c_12Gb : Configure ATTO 12Gb PHY settings
823 * @pm8001_ha : our adapter
826 int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
828 struct pm8001_mpi3_phy_pg_trx_config phycfg_int;
829 struct pm8001_mpi3_phy_pg_trx_config phycfg_ext;
833 memset(&phycfg_int, 0, sizeof(phycfg_int));
834 memset(&phycfg_ext, 0, sizeof(phycfg_ext));
836 pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int);
837 pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext);
838 pm8001_get_phy_mask(pm8001_ha, &phymask);
840 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
841 if (phymask & (1 << i)) {/* Internal PHY */
842 pm8001_set_phy_profile_single(pm8001_ha, i,
843 sizeof(phycfg_int) / sizeof(u32),
846 } else { /* External PHY */
847 pm8001_set_phy_profile_single(pm8001_ha, i,
848 sizeof(phycfg_ext) / sizeof(u32),
857 * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID.
858 * @pm8001_ha : our hba.
860 static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
862 switch (pm8001_ha->pdev->subsystem_vendor) {
863 case PCI_VENDOR_ID_ATTO:
864 if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */
867 return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha);
869 case PCI_VENDOR_ID_ADAPTEC2:
874 return pm8001_get_phy_settings_info(pm8001_ha);
878 #ifdef PM8001_USE_MSIX
880 * pm8001_setup_msix - enable MSI-X interrupt
881 * @chip_info: our ha struct.
882 * @irq_handler: irq_handler
884 static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
890 static char intr_drvname[PM8001_MAX_MSIX_VEC][sizeof(DRV_NAME)+3];
892 /* SPCv controllers supports 64 msi-x */
893 if (pm8001_ha->chip_id == chip_8001) {
896 number_of_intr = PM8001_MAX_MSIX_VEC;
897 flag &= ~IRQF_SHARED;
900 rc = pci_alloc_irq_vectors(pm8001_ha->pdev, number_of_intr,
901 number_of_intr, PCI_IRQ_MSIX);
904 pm8001_ha->number_of_intr = number_of_intr;
906 PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
907 "pci_alloc_irq_vectors request ret:%d no of intr %d\n",
908 rc, pm8001_ha->number_of_intr));
910 for (i = 0; i < number_of_intr; i++) {
911 snprintf(intr_drvname[i], sizeof(intr_drvname[0]),
913 pm8001_ha->irq_vector[i].irq_id = i;
914 pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
916 rc = request_irq(pci_irq_vector(pm8001_ha->pdev, i),
917 pm8001_interrupt_handler_msix, flag,
918 intr_drvname[i], &(pm8001_ha->irq_vector[i]));
920 for (j = 0; j < i; j++) {
921 free_irq(pci_irq_vector(pm8001_ha->pdev, i),
922 &(pm8001_ha->irq_vector[i]));
924 pci_free_irq_vectors(pm8001_ha->pdev);
934 * pm8001_request_irq - register interrupt
935 * @chip_info: our ha struct.
937 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
939 struct pci_dev *pdev;
942 pdev = pm8001_ha->pdev;
944 #ifdef PM8001_USE_MSIX
945 if (pdev->msix_cap && pci_msi_enabled())
946 return pm8001_setup_msix(pm8001_ha);
948 PM8001_INIT_DBG(pm8001_ha,
949 pm8001_printk("MSIX not supported!!!\n"));
955 /* initialize the INT-X interrupt */
956 pm8001_ha->irq_vector[0].irq_id = 0;
957 pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
958 rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
959 DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost));
964 * pm8001_pci_probe - probe supported device
965 * @pdev: pci device which kernel has been prepared for.
966 * @ent: pci device id
968 * This function is the main initialization function, when register a new
969 * pci driver it is invoked, all struct an hardware initilization should be done
970 * here, also, register interrupt
972 static int pm8001_pci_probe(struct pci_dev *pdev,
973 const struct pci_device_id *ent)
978 struct pm8001_hba_info *pm8001_ha;
979 struct Scsi_Host *shost = NULL;
980 const struct pm8001_chip_info *chip;
982 dev_printk(KERN_INFO, &pdev->dev,
983 "pm80xx: driver version %s\n", DRV_VERSION);
984 rc = pci_enable_device(pdev);
987 pci_set_master(pdev);
989 * Enable pci slot busmaster by setting pci command register.
990 * This is required by FW for Cyclone card.
993 pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
995 pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
996 rc = pci_request_regions(pdev, DRV_NAME);
998 goto err_out_disable;
999 rc = pci_go_44(pdev);
1001 goto err_out_regions;
1003 shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
1006 goto err_out_regions;
1008 chip = &pm8001_chips[ent->driver_data];
1009 SHOST_TO_SAS_HA(shost) =
1010 kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
1011 if (!SHOST_TO_SAS_HA(shost)) {
1013 goto err_out_free_host;
1016 rc = pm8001_prep_sas_ha_init(shost, chip);
1021 pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
1022 /* ent->driver variable is used to differentiate between controllers */
1023 pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
1028 list_add_tail(&pm8001_ha->list, &hba_list);
1029 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1030 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1032 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
1033 "chip_init failed [ret: %d]\n", rc));
1034 goto err_out_ha_free;
1037 rc = scsi_add_host(shost, &pdev->dev);
1039 goto err_out_ha_free;
1040 rc = pm8001_request_irq(pm8001_ha);
1042 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
1043 "pm8001_request_irq failed [ret: %d]\n", rc));
1047 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1048 if (pm8001_ha->chip_id != chip_8001) {
1049 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1050 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1051 /* setup thermal configuration. */
1052 pm80xx_set_thermal_config(pm8001_ha);
1055 pm8001_init_sas_add(pm8001_ha);
1056 /* phy setting support for motherboard controller */
1057 rc = pm8001_configure_phy_settings(pm8001_ha);
1061 pm8001_post_sas_ha_init(shost, chip);
1062 rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
1065 scsi_scan_host(pm8001_ha->shost);
1069 scsi_remove_host(pm8001_ha->shost);
1071 pm8001_free(pm8001_ha);
1073 kfree(SHOST_TO_SAS_HA(shost));
1075 scsi_host_put(shost);
1077 pci_release_regions(pdev);
1079 pci_disable_device(pdev);
1084 static void pm8001_pci_remove(struct pci_dev *pdev)
1086 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1087 struct pm8001_hba_info *pm8001_ha;
1089 pm8001_ha = sha->lldd_ha;
1090 sas_unregister_ha(sha);
1091 sas_remove_host(pm8001_ha->shost);
1092 list_del(&pm8001_ha->list);
1093 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1094 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1096 #ifdef PM8001_USE_MSIX
1097 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1098 synchronize_irq(pci_irq_vector(pdev, i));
1099 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1100 free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
1101 pci_free_irq_vectors(pdev);
1103 free_irq(pm8001_ha->irq, sha);
1105 #ifdef PM8001_USE_TASKLET
1106 /* For non-msix and msix interrupts */
1107 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1108 (pm8001_ha->chip_id == chip_8001))
1109 tasklet_kill(&pm8001_ha->tasklet[0]);
1111 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1112 tasklet_kill(&pm8001_ha->tasklet[j]);
1114 scsi_host_put(pm8001_ha->shost);
1115 pm8001_free(pm8001_ha);
1116 kfree(sha->sas_phy);
1117 kfree(sha->sas_port);
1119 pci_release_regions(pdev);
1120 pci_disable_device(pdev);
1124 * pm8001_pci_suspend - power management suspend main entry point
1125 * @pdev: PCI device struct
1126 * @state: PM state change to (usually PCI_D3)
1128 * Returns 0 success, anything else error.
1130 static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
1132 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1133 struct pm8001_hba_info *pm8001_ha;
1136 pm8001_ha = sha->lldd_ha;
1137 sas_suspend_ha(sha);
1138 flush_workqueue(pm8001_wq);
1139 scsi_block_requests(pm8001_ha->shost);
1140 if (!pdev->pm_cap) {
1141 dev_err(&pdev->dev, " PCI PM not supported\n");
1144 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1145 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1146 #ifdef PM8001_USE_MSIX
1147 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1148 synchronize_irq(pci_irq_vector(pdev, i));
1149 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1150 free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
1151 pci_free_irq_vectors(pdev);
1153 free_irq(pm8001_ha->irq, sha);
1155 #ifdef PM8001_USE_TASKLET
1156 /* For non-msix and msix interrupts */
1157 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1158 (pm8001_ha->chip_id == chip_8001))
1159 tasklet_kill(&pm8001_ha->tasklet[0]);
1161 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1162 tasklet_kill(&pm8001_ha->tasklet[j]);
1164 device_state = pci_choose_state(pdev, state);
1165 pm8001_printk("pdev=0x%p, slot=%s, entering "
1166 "operating state [D%d]\n", pdev,
1167 pm8001_ha->name, device_state);
1168 pci_save_state(pdev);
1169 pci_disable_device(pdev);
1170 pci_set_power_state(pdev, device_state);
1175 * pm8001_pci_resume - power management resume main entry point
1176 * @pdev: PCI device struct
1178 * Returns 0 success, anything else error.
1180 static int pm8001_pci_resume(struct pci_dev *pdev)
1182 struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1183 struct pm8001_hba_info *pm8001_ha;
1187 DECLARE_COMPLETION_ONSTACK(completion);
1188 pm8001_ha = sha->lldd_ha;
1189 device_state = pdev->current_state;
1191 pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
1192 "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
1194 pci_set_power_state(pdev, PCI_D0);
1195 pci_enable_wake(pdev, PCI_D0, 0);
1196 pci_restore_state(pdev);
1197 rc = pci_enable_device(pdev);
1199 pm8001_printk("slot=%s Enable device failed during resume\n",
1201 goto err_out_enable;
1204 pci_set_master(pdev);
1205 rc = pci_go_44(pdev);
1207 goto err_out_disable;
1208 sas_prep_resume_ha(sha);
1209 /* chip soft rst only for spc */
1210 if (pm8001_ha->chip_id == chip_8001) {
1211 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1212 PM8001_INIT_DBG(pm8001_ha,
1213 pm8001_printk("chip soft reset successful\n"));
1215 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1217 goto err_out_disable;
1219 /* disable all the interrupt bits */
1220 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1222 rc = pm8001_request_irq(pm8001_ha);
1224 goto err_out_disable;
1225 #ifdef PM8001_USE_TASKLET
1226 /* Tasklet for non msi-x interrupt handler */
1227 if ((!pdev->msix_cap || !pci_msi_enabled()) ||
1228 (pm8001_ha->chip_id == chip_8001))
1229 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
1230 (unsigned long)&(pm8001_ha->irq_vector[0]));
1232 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1233 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
1234 (unsigned long)&(pm8001_ha->irq_vector[j]));
1236 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1237 if (pm8001_ha->chip_id != chip_8001) {
1238 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1239 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1242 /* Chip documentation for the 8070 and 8072 SPCv */
1243 /* states that a 500ms minimum delay is required */
1244 /* before issuing commands. Otherwise, the firmware */
1245 /* will enter an unrecoverable state. */
1247 if (pm8001_ha->chip_id == chip_8070 ||
1248 pm8001_ha->chip_id == chip_8072) {
1252 /* Spin up the PHYs */
1254 pm8001_ha->flags = PM8001F_RUN_TIME;
1255 for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
1256 pm8001_ha->phy[i].enable_completion = &completion;
1257 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
1258 wait_for_completion(&completion);
1264 scsi_remove_host(pm8001_ha->shost);
1265 pci_disable_device(pdev);
1270 /* update of pci device, vendor id and driver data with
1271 * unique value for each of the controller
1273 static struct pci_device_id pm8001_pci_table[] = {
1274 { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
1275 { PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 },
1276 { PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 },
1277 { PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
1278 /* Support for SPC/SPCv/SPCve controllers */
1279 { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
1280 { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
1281 { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
1282 { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
1283 { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
1284 { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
1285 { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
1286 { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
1287 { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
1288 { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
1289 { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
1290 { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
1291 { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
1292 { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
1293 { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
1294 { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1295 PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
1296 { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1297 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
1298 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1299 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
1300 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1301 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
1302 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1303 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
1304 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1305 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
1306 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1307 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
1308 { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1309 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
1310 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1311 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
1312 { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1313 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
1314 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1315 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
1316 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1317 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
1318 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1319 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
1320 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1321 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
1322 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1323 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
1324 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1325 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
1326 { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1327 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
1328 { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1329 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
1330 { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1331 PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
1332 { PCI_VENDOR_ID_ATTO, 0x8070,
1333 PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 },
1334 { PCI_VENDOR_ID_ATTO, 0x8070,
1335 PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 },
1336 { PCI_VENDOR_ID_ATTO, 0x8072,
1337 PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 },
1338 { PCI_VENDOR_ID_ATTO, 0x8072,
1339 PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 },
1340 { PCI_VENDOR_ID_ATTO, 0x8070,
1341 PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 },
1342 { PCI_VENDOR_ID_ATTO, 0x8072,
1343 PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 },
1344 { PCI_VENDOR_ID_ATTO, 0x8072,
1345 PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 },
1346 {} /* terminate list */
1349 static struct pci_driver pm8001_pci_driver = {
1351 .id_table = pm8001_pci_table,
1352 .probe = pm8001_pci_probe,
1353 .remove = pm8001_pci_remove,
1354 .suspend = pm8001_pci_suspend,
1355 .resume = pm8001_pci_resume,
1359 * pm8001_init - initialize scsi transport template
1361 static int __init pm8001_init(void)
1365 pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
1370 pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
1373 rc = pci_register_driver(&pm8001_pci_driver);
1379 sas_release_transport(pm8001_stt);
1381 destroy_workqueue(pm8001_wq);
1386 static void __exit pm8001_exit(void)
1388 pci_unregister_driver(&pm8001_pci_driver);
1389 sas_release_transport(pm8001_stt);
1390 destroy_workqueue(pm8001_wq);
1393 module_init(pm8001_init);
1394 module_exit(pm8001_exit);
1396 MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
1397 MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
1398 MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
1399 MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
1401 "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 "
1402 "SAS/SATA controller driver");
1403 MODULE_VERSION(DRV_VERSION);
1404 MODULE_LICENSE("GPL");
1405 MODULE_DEVICE_TABLE(pci, pm8001_pci_table);