GNU Linux-libre 6.8.7-gnu
[releases.git] / drivers / scsi / libfc / fc_fcp.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright(c) 2007 Intel Corporation. All rights reserved.
4  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
5  * Copyright(c) 2008 Mike Christie
6  *
7  * Maintained at www.Open-FCoE.org
8  */
9
10 #include <linux/module.h>
11 #include <linux/delay.h>
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/spinlock.h>
15 #include <linux/scatterlist.h>
16 #include <linux/err.h>
17 #include <linux/crc32.h>
18 #include <linux/slab.h>
19
20 #include <scsi/scsi_tcq.h>
21 #include <scsi/scsi.h>
22 #include <scsi/scsi_host.h>
23 #include <scsi/scsi_device.h>
24 #include <scsi/scsi_cmnd.h>
25
26 #include <scsi/fc/fc_fc2.h>
27
28 #include <scsi/libfc.h>
29
30 #include "fc_encode.h"
31 #include "fc_libfc.h"
32
33 static struct kmem_cache *scsi_pkt_cachep;
34
35 /* SRB state definitions */
36 #define FC_SRB_FREE             0               /* cmd is free */
37 #define FC_SRB_CMD_SENT         (1 << 0)        /* cmd has been sent */
38 #define FC_SRB_RCV_STATUS       (1 << 1)        /* response has arrived */
39 #define FC_SRB_ABORT_PENDING    (1 << 2)        /* cmd abort sent to device */
40 #define FC_SRB_ABORTED          (1 << 3)        /* abort acknowledged */
41 #define FC_SRB_DISCONTIG        (1 << 4)        /* non-sequential data recvd */
42 #define FC_SRB_COMPL            (1 << 5)        /* fc_io_compl has been run */
43 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)      /* timer function processing */
44
45 #define FC_SRB_READ             (1 << 1)
46 #define FC_SRB_WRITE            (1 << 0)
47
48 static struct libfc_cmd_priv *libfc_priv(struct scsi_cmnd *cmd)
49 {
50         return scsi_cmd_priv(cmd);
51 }
52
53 /**
54  * struct fc_fcp_internal - FCP layer internal data
55  * @scsi_pkt_pool: Memory pool to draw FCP packets from
56  * @scsi_queue_lock: Protects the scsi_pkt_queue
57  * @scsi_pkt_queue: Current FCP packets
58  * @last_can_queue_ramp_down_time: ramp down time
59  * @last_can_queue_ramp_up_time: ramp up time
60  * @max_can_queue: max can_queue size
61  */
62 struct fc_fcp_internal {
63         mempool_t               *scsi_pkt_pool;
64         spinlock_t              scsi_queue_lock;
65         struct list_head        scsi_pkt_queue;
66         unsigned long           last_can_queue_ramp_down_time;
67         unsigned long           last_can_queue_ramp_up_time;
68         int                     max_can_queue;
69 };
70
71 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
72
73 /*
74  * function prototypes
75  * FC scsi I/O related functions
76  */
77 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
78 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
79 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
80 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
81 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
82 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
83 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
84 static void fc_fcp_timeout(struct timer_list *);
85 static void fc_fcp_rec(struct fc_fcp_pkt *);
86 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
87 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
88 static void fc_io_compl(struct fc_fcp_pkt *);
89
90 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
91 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
92 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
93
94 /*
95  * command status codes
96  */
97 #define FC_COMPLETE             0
98 #define FC_CMD_ABORTED          1
99 #define FC_CMD_RESET            2
100 #define FC_CMD_PLOGO            3
101 #define FC_SNS_RCV              4
102 #define FC_TRANS_ERR            5
103 #define FC_DATA_OVRRUN          6
104 #define FC_DATA_UNDRUN          7
105 #define FC_ERROR                8
106 #define FC_HRD_ERROR            9
107 #define FC_CRC_ERROR            10
108 #define FC_TIMED_OUT            11
109 #define FC_TRANS_RESET          12
110
111 /*
112  * Error recovery timeout values.
113  */
114 #define FC_SCSI_TM_TOV          (10 * HZ)
115 #define FC_HOST_RESET_TIMEOUT   (30 * HZ)
116 #define FC_CAN_QUEUE_PERIOD     (60 * HZ)
117
118 #define FC_MAX_ERROR_CNT        5
119 #define FC_MAX_RECOV_RETRY      3
120
121 #define FC_FCP_DFLT_QUEUE_DEPTH 32
122
123 /**
124  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
125  * @lport: The local port that the FCP packet is for
126  * @gfp:   GFP flags for allocation
127  *
128  * Return value: fcp_pkt structure or null on allocation failure.
129  * Context:      Can be called from process context, no lock is required.
130  */
131 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
132 {
133         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
134         struct fc_fcp_pkt *fsp;
135
136         fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
137         if (fsp) {
138                 memset(fsp, 0, sizeof(*fsp));
139                 fsp->lp = lport;
140                 fsp->xfer_ddp = FC_XID_UNKNOWN;
141                 refcount_set(&fsp->ref_cnt, 1);
142                 timer_setup(&fsp->timer, NULL, 0);
143                 INIT_LIST_HEAD(&fsp->list);
144                 spin_lock_init(&fsp->scsi_pkt_lock);
145         } else {
146                 this_cpu_inc(lport->stats->FcpPktAllocFails);
147         }
148         return fsp;
149 }
150
151 /**
152  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
153  * @fsp: The FCP packet to be released
154  *
155  * Context: Can be called from process or interrupt context,
156  *          no lock is required.
157  */
158 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
159 {
160         if (refcount_dec_and_test(&fsp->ref_cnt)) {
161                 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
162
163                 mempool_free(fsp, si->scsi_pkt_pool);
164         }
165 }
166
167 /**
168  * fc_fcp_pkt_hold() - Hold a fcp_pkt
169  * @fsp: The FCP packet to be held
170  */
171 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
172 {
173         refcount_inc(&fsp->ref_cnt);
174 }
175
176 /**
177  * fc_fcp_pkt_destroy() - Release hold on a fcp_pkt
178  * @seq: The sequence that the FCP packet is on (required by destructor API)
179  * @fsp: The FCP packet to be released
180  *
181  * This routine is called by a destructor callback in the fc_exch_seq_send()
182  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
183  * argument even though it is not used by this routine.
184  *
185  * Context: No locking required.
186  */
187 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
188 {
189         fc_fcp_pkt_release(fsp);
190 }
191
192 /**
193  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
194  * @fsp: The FCP packet to be locked and incremented
195  *
196  * We should only return error if we return a command to SCSI-ml before
197  * getting a response. This can happen in cases where we send a abort, but
198  * do not wait for the response and the abort and command can be passing
199  * each other on the wire/network-layer.
200  *
201  * Note: this function locks the packet and gets a reference to allow
202  * callers to call the completion function while the lock is held and
203  * not have to worry about the packets refcount.
204  *
205  * TODO: Maybe we should just have callers grab/release the lock and
206  * have a function that they call to verify the fsp and grab a ref if
207  * needed.
208  */
209 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
210 {
211         spin_lock_bh(&fsp->scsi_pkt_lock);
212         if (fsp->state & FC_SRB_COMPL) {
213                 spin_unlock_bh(&fsp->scsi_pkt_lock);
214                 return -EPERM;
215         }
216
217         fc_fcp_pkt_hold(fsp);
218         return 0;
219 }
220
221 /**
222  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
223  *                       reference count
224  * @fsp: The FCP packet to be unlocked and decremented
225  */
226 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
227 {
228         spin_unlock_bh(&fsp->scsi_pkt_lock);
229         fc_fcp_pkt_release(fsp);
230 }
231
232 /**
233  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
234  * @fsp:   The FCP packet to start a timer for
235  * @delay: The timeout period in jiffies
236  */
237 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
238 {
239         if (!(fsp->state & FC_SRB_COMPL)) {
240                 mod_timer(&fsp->timer, jiffies + delay);
241                 fsp->timer_delay = delay;
242         }
243 }
244
245 static void fc_fcp_abort_done(struct fc_fcp_pkt *fsp)
246 {
247         fsp->state |= FC_SRB_ABORTED;
248         fsp->state &= ~FC_SRB_ABORT_PENDING;
249
250         if (fsp->wait_for_comp)
251                 complete(&fsp->tm_done);
252         else
253                 fc_fcp_complete_locked(fsp);
254 }
255
256 /**
257  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
258  *                       fcp_pkt
259  * @fsp: The FCP packet to abort exchanges on
260  */
261 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
262 {
263         int rc;
264
265         if (!fsp->seq_ptr)
266                 return -EINVAL;
267
268         if (fsp->state & FC_SRB_ABORT_PENDING) {
269                 FC_FCP_DBG(fsp, "abort already pending\n");
270                 return -EBUSY;
271         }
272
273         this_cpu_inc(fsp->lp->stats->FcpPktAborts);
274
275         fsp->state |= FC_SRB_ABORT_PENDING;
276         rc = fc_seq_exch_abort(fsp->seq_ptr, 0);
277         /*
278          * fc_seq_exch_abort() might return -ENXIO if
279          * the sequence is already completed
280          */
281         if (rc == -ENXIO) {
282                 fc_fcp_abort_done(fsp);
283                 rc = 0;
284         }
285         return rc;
286 }
287
288 /**
289  * fc_fcp_retry_cmd() - Retry a fcp_pkt
290  * @fsp: The FCP packet to be retried
291  * @status_code: The FCP status code to set
292  *
293  * Sets the status code to be FC_ERROR and then calls
294  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
295  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
296  * The SCSI-ml will retry the command.
297  */
298 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp, int status_code)
299 {
300         if (fsp->seq_ptr) {
301                 fc_exch_done(fsp->seq_ptr);
302                 fsp->seq_ptr = NULL;
303         }
304
305         fsp->state &= ~FC_SRB_ABORT_PENDING;
306         fsp->io_status = 0;
307         fsp->status_code = status_code;
308         fc_fcp_complete_locked(fsp);
309 }
310
311 /**
312  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
313  * @fsp: The FCP packet that will manage the DDP frames
314  * @xid: The XID that will be used for the DDP exchange
315  */
316 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
317 {
318         struct fc_lport *lport;
319
320         lport = fsp->lp;
321         if ((fsp->req_flags & FC_SRB_READ) &&
322             (lport->lro_enabled) && (lport->tt.ddp_setup)) {
323                 if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
324                                         scsi_sg_count(fsp->cmd)))
325                         fsp->xfer_ddp = xid;
326         }
327 }
328
329 /**
330  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
331  *                     DDP related resources for a fcp_pkt
332  * @fsp: The FCP packet that DDP had been used on
333  */
334 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
335 {
336         struct fc_lport *lport;
337
338         if (!fsp)
339                 return;
340
341         if (fsp->xfer_ddp == FC_XID_UNKNOWN)
342                 return;
343
344         lport = fsp->lp;
345         if (lport->tt.ddp_done) {
346                 fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
347                 fsp->xfer_ddp = FC_XID_UNKNOWN;
348         }
349 }
350
351 /**
352  * fc_fcp_can_queue_ramp_up() - increases can_queue
353  * @lport: lport to ramp up can_queue
354  */
355 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
356 {
357         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
358         unsigned long flags;
359         int can_queue;
360
361         spin_lock_irqsave(lport->host->host_lock, flags);
362
363         if (si->last_can_queue_ramp_up_time &&
364             (time_before(jiffies, si->last_can_queue_ramp_up_time +
365                          FC_CAN_QUEUE_PERIOD)))
366                 goto unlock;
367
368         if (time_before(jiffies, si->last_can_queue_ramp_down_time +
369                         FC_CAN_QUEUE_PERIOD))
370                 goto unlock;
371
372         si->last_can_queue_ramp_up_time = jiffies;
373
374         can_queue = lport->host->can_queue << 1;
375         if (can_queue >= si->max_can_queue) {
376                 can_queue = si->max_can_queue;
377                 si->last_can_queue_ramp_down_time = 0;
378         }
379         lport->host->can_queue = can_queue;
380         shost_printk(KERN_ERR, lport->host, "libfc: increased "
381                      "can_queue to %d.\n", can_queue);
382
383 unlock:
384         spin_unlock_irqrestore(lport->host->host_lock, flags);
385 }
386
387 /**
388  * fc_fcp_can_queue_ramp_down() - reduces can_queue
389  * @lport: lport to reduce can_queue
390  *
391  * If we are getting memory allocation failures, then we may
392  * be trying to execute too many commands. We let the running
393  * commands complete or timeout, then try again with a reduced
394  * can_queue. Eventually we will hit the point where we run
395  * on all reserved structs.
396  */
397 static bool fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
398 {
399         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
400         unsigned long flags;
401         int can_queue;
402         bool changed = false;
403
404         spin_lock_irqsave(lport->host->host_lock, flags);
405
406         if (si->last_can_queue_ramp_down_time &&
407             (time_before(jiffies, si->last_can_queue_ramp_down_time +
408                          FC_CAN_QUEUE_PERIOD)))
409                 goto unlock;
410
411         si->last_can_queue_ramp_down_time = jiffies;
412
413         can_queue = lport->host->can_queue;
414         can_queue >>= 1;
415         if (!can_queue)
416                 can_queue = 1;
417         lport->host->can_queue = can_queue;
418         changed = true;
419
420 unlock:
421         spin_unlock_irqrestore(lport->host->host_lock, flags);
422         return changed;
423 }
424
425 /*
426  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
427  * @lport:      fc lport struct
428  * @len:        payload length
429  *
430  * Allocates fc_frame structure and buffer but if fails to allocate
431  * then reduce can_queue.
432  */
433 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
434                                                   size_t len)
435 {
436         struct fc_frame *fp;
437
438         fp = fc_frame_alloc(lport, len);
439         if (likely(fp))
440                 return fp;
441
442         this_cpu_inc(lport->stats->FcpFrameAllocFails);
443         /* error case */
444         fc_fcp_can_queue_ramp_down(lport);
445         shost_printk(KERN_ERR, lport->host,
446                      "libfc: Could not allocate frame, "
447                      "reducing can_queue to %d.\n", lport->host->can_queue);
448         return NULL;
449 }
450
451 /**
452  * get_fsp_rec_tov() - Helper function to get REC_TOV
453  * @fsp: the FCP packet
454  *
455  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
456  */
457 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
458 {
459         struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
460         unsigned int e_d_tov = FC_DEF_E_D_TOV;
461
462         if (rpriv && rpriv->e_d_tov > e_d_tov)
463                 e_d_tov = rpriv->e_d_tov;
464         return msecs_to_jiffies(e_d_tov) + HZ;
465 }
466
467 /**
468  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
469  * @fsp: The FCP packet the data is on
470  * @fp:  The data frame
471  */
472 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
473 {
474         struct scsi_cmnd *sc = fsp->cmd;
475         struct fc_lport *lport = fsp->lp;
476         struct fc_frame_header *fh;
477         size_t start_offset;
478         size_t offset;
479         u32 crc;
480         u32 copy_len = 0;
481         size_t len;
482         void *buf;
483         struct scatterlist *sg;
484         u32 nents;
485         u8 host_bcode = FC_COMPLETE;
486
487         fh = fc_frame_header_get(fp);
488         offset = ntohl(fh->fh_parm_offset);
489         start_offset = offset;
490         len = fr_len(fp) - sizeof(*fh);
491         buf = fc_frame_payload_get(fp, 0);
492
493         /*
494          * if this I/O is ddped then clear it and initiate recovery since data
495          * frames are expected to be placed directly in that case.
496          *
497          * Indicate error to scsi-ml because something went wrong with the
498          * ddp handling to get us here.
499          */
500         if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
501                 fc_fcp_ddp_done(fsp);
502                 FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
503                 host_bcode = FC_ERROR;
504                 goto err;
505         }
506         if (offset + len > fsp->data_len) {
507                 /* this should never happen */
508                 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
509                     fc_frame_crc_check(fp))
510                         goto crc_err;
511                 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
512                            "data_len %x\n", len, offset, fsp->data_len);
513
514                 /* Data is corrupted indicate scsi-ml should retry */
515                 host_bcode = FC_DATA_OVRRUN;
516                 goto err;
517         }
518         if (offset != fsp->xfer_len)
519                 fsp->state |= FC_SRB_DISCONTIG;
520
521         sg = scsi_sglist(sc);
522         nents = scsi_sg_count(sc);
523
524         if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
525                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
526                                                     &offset, NULL);
527         } else {
528                 crc = crc32(~0, (u8 *) fh, sizeof(*fh));
529                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
530                                                     &offset, &crc);
531                 buf = fc_frame_payload_get(fp, 0);
532                 if (len % 4)
533                         crc = crc32(crc, buf + len, 4 - (len % 4));
534
535                 if (~crc != le32_to_cpu(fr_crc(fp))) {
536 crc_err:
537                         this_cpu_inc(lport->stats->ErrorFrames);
538                         /* per cpu count, not total count, but OK for limit */
539                         if (this_cpu_inc_return(lport->stats->InvalidCRCCount) < FC_MAX_ERROR_CNT)
540                                 printk(KERN_WARNING "libfc: CRC error on data "
541                                        "frame for port (%6.6x)\n",
542                                        lport->port_id);
543                         /*
544                          * Assume the frame is total garbage.
545                          * We may have copied it over the good part
546                          * of the buffer.
547                          * If so, we need to retry the entire operation.
548                          * Otherwise, ignore it.
549                          */
550                         if (fsp->state & FC_SRB_DISCONTIG) {
551                                 host_bcode = FC_CRC_ERROR;
552                                 goto err;
553                         }
554                         return;
555                 }
556         }
557
558         if (fsp->xfer_contig_end == start_offset)
559                 fsp->xfer_contig_end += copy_len;
560         fsp->xfer_len += copy_len;
561
562         /*
563          * In the very rare event that this data arrived after the response
564          * and completes the transfer, call the completion handler.
565          */
566         if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
567             fsp->xfer_len == fsp->data_len - fsp->scsi_resid) {
568                 FC_FCP_DBG( fsp, "complete out-of-order sequence\n" );
569                 fc_fcp_complete_locked(fsp);
570         }
571         return;
572 err:
573         fc_fcp_recovery(fsp, host_bcode);
574 }
575
576 /**
577  * fc_fcp_send_data() - Send SCSI data to a target
578  * @fsp:      The FCP packet the data is on
579  * @seq:      The sequence the data is to be sent on
580  * @offset:   The starting offset for this data request
581  * @seq_blen: The burst length for this data request
582  *
583  * Called after receiving a Transfer Ready data descriptor.
584  * If the LLD is capable of sequence offload then send down the
585  * seq_blen amount of data in single frame, otherwise send
586  * multiple frames of the maximum frame payload supported by
587  * the target port.
588  */
589 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
590                             size_t offset, size_t seq_blen)
591 {
592         struct fc_exch *ep;
593         struct scsi_cmnd *sc;
594         struct scatterlist *sg;
595         struct fc_frame *fp = NULL;
596         struct fc_lport *lport = fsp->lp;
597         struct page *page;
598         size_t remaining;
599         size_t t_blen;
600         size_t tlen;
601         size_t sg_bytes;
602         size_t frame_offset, fh_parm_offset;
603         size_t off;
604         int error;
605         void *data = NULL;
606         void *page_addr;
607         int using_sg = lport->sg_supp;
608         u32 f_ctl;
609
610         WARN_ON(seq_blen <= 0);
611         if (unlikely(offset + seq_blen > fsp->data_len)) {
612                 /* this should never happen */
613                 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
614                            "offset %zx\n", seq_blen, offset);
615                 fc_fcp_send_abort(fsp);
616                 return 0;
617         } else if (offset != fsp->xfer_len) {
618                 /* Out of Order Data Request - no problem, but unexpected. */
619                 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
620                            "seq_blen %zx offset %zx\n", seq_blen, offset);
621         }
622
623         /*
624          * if LLD is capable of seq_offload then set transport
625          * burst length (t_blen) to seq_blen, otherwise set t_blen
626          * to max FC frame payload previously set in fsp->max_payload.
627          */
628         t_blen = fsp->max_payload;
629         if (lport->seq_offload) {
630                 t_blen = min(seq_blen, (size_t)lport->lso_max);
631                 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
632                            fsp, seq_blen, lport->lso_max, t_blen);
633         }
634
635         if (t_blen > 512)
636                 t_blen &= ~(512 - 1);   /* round down to block size */
637         sc = fsp->cmd;
638
639         remaining = seq_blen;
640         fh_parm_offset = frame_offset = offset;
641         tlen = 0;
642         seq = fc_seq_start_next(seq);
643         f_ctl = FC_FC_REL_OFF;
644         WARN_ON(!seq);
645
646         sg = scsi_sglist(sc);
647
648         while (remaining > 0 && sg) {
649                 if (offset >= sg->length) {
650                         offset -= sg->length;
651                         sg = sg_next(sg);
652                         continue;
653                 }
654                 if (!fp) {
655                         tlen = min(t_blen, remaining);
656
657                         /*
658                          * TODO.  Temporary workaround.  fc_seq_send() can't
659                          * handle odd lengths in non-linear skbs.
660                          * This will be the final fragment only.
661                          */
662                         if (tlen % 4)
663                                 using_sg = 0;
664                         fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
665                         if (!fp)
666                                 return -ENOMEM;
667
668                         data = fc_frame_header_get(fp) + 1;
669                         fh_parm_offset = frame_offset;
670                         fr_max_payload(fp) = fsp->max_payload;
671                 }
672
673                 off = offset + sg->offset;
674                 sg_bytes = min(tlen, sg->length - offset);
675                 sg_bytes = min(sg_bytes,
676                                (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
677                 page = sg_page(sg) + (off >> PAGE_SHIFT);
678                 if (using_sg) {
679                         get_page(page);
680                         skb_fill_page_desc(fp_skb(fp),
681                                            skb_shinfo(fp_skb(fp))->nr_frags,
682                                            page, off & ~PAGE_MASK, sg_bytes);
683                         fp_skb(fp)->data_len += sg_bytes;
684                         fr_len(fp) += sg_bytes;
685                         fp_skb(fp)->truesize += PAGE_SIZE;
686                 } else {
687                         /*
688                          * The scatterlist item may be bigger than PAGE_SIZE,
689                          * but we must not cross pages inside the kmap.
690                          */
691                         page_addr = kmap_atomic(page);
692                         memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
693                                sg_bytes);
694                         kunmap_atomic(page_addr);
695                         data += sg_bytes;
696                 }
697                 offset += sg_bytes;
698                 frame_offset += sg_bytes;
699                 tlen -= sg_bytes;
700                 remaining -= sg_bytes;
701
702                 if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
703                     (tlen))
704                         continue;
705
706                 /*
707                  * Send sequence with transfer sequence initiative in case
708                  * this is last FCP frame of the sequence.
709                  */
710                 if (remaining == 0)
711                         f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
712
713                 ep = fc_seq_exch(seq);
714                 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
715                                FC_TYPE_FCP, f_ctl, fh_parm_offset);
716
717                 /*
718                  * send fragment using for a sequence.
719                  */
720                 error = fc_seq_send(lport, seq, fp);
721                 if (error) {
722                         WARN_ON(1);             /* send error should be rare */
723                         return error;
724                 }
725                 fp = NULL;
726         }
727         fsp->xfer_len += seq_blen;      /* premature count? */
728         return 0;
729 }
730
731 /**
732  * fc_fcp_abts_resp() - Receive an ABTS response
733  * @fsp: The FCP packet that is being aborted
734  * @fp:  The response frame
735  */
736 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
737 {
738         int ba_done = 1;
739         struct fc_ba_rjt *brp;
740         struct fc_frame_header *fh;
741
742         fh = fc_frame_header_get(fp);
743         switch (fh->fh_r_ctl) {
744         case FC_RCTL_BA_ACC:
745                 break;
746         case FC_RCTL_BA_RJT:
747                 brp = fc_frame_payload_get(fp, sizeof(*brp));
748                 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
749                         break;
750                 fallthrough;
751         default:
752                 /*
753                  * we will let the command timeout
754                  * and scsi-ml recover in this case,
755                  * therefore cleared the ba_done flag.
756                  */
757                 ba_done = 0;
758         }
759
760         if (ba_done)
761                 fc_fcp_abort_done(fsp);
762 }
763
764 /**
765  * fc_fcp_recv() - Receive an FCP frame
766  * @seq: The sequence the frame is on
767  * @fp:  The received frame
768  * @arg: The related FCP packet
769  *
770  * Context: Called from Soft IRQ context. Can not be called
771  *          holding the FCP packet list lock.
772  */
773 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
774 {
775         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
776         struct fc_lport *lport = fsp->lp;
777         struct fc_frame_header *fh;
778         struct fcp_txrdy *dd;
779         u8 r_ctl;
780         int rc = 0;
781
782         if (IS_ERR(fp)) {
783                 fc_fcp_error(fsp, fp);
784                 return;
785         }
786
787         fh = fc_frame_header_get(fp);
788         r_ctl = fh->fh_r_ctl;
789
790         if (lport->state != LPORT_ST_READY) {
791                 FC_FCP_DBG(fsp, "lport state %d, ignoring r_ctl %x\n",
792                            lport->state, r_ctl);
793                 goto out;
794         }
795         if (fc_fcp_lock_pkt(fsp))
796                 goto out;
797
798         if (fh->fh_type == FC_TYPE_BLS) {
799                 fc_fcp_abts_resp(fsp, fp);
800                 goto unlock;
801         }
802
803         if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) {
804                 FC_FCP_DBG(fsp, "command aborted, ignoring r_ctl %x\n", r_ctl);
805                 goto unlock;
806         }
807
808         if (r_ctl == FC_RCTL_DD_DATA_DESC) {
809                 /*
810                  * received XFER RDY from the target
811                  * need to send data to the target
812                  */
813                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
814                 dd = fc_frame_payload_get(fp, sizeof(*dd));
815                 WARN_ON(!dd);
816
817                 rc = fc_fcp_send_data(fsp, seq,
818                                       (size_t) ntohl(dd->ft_data_ro),
819                                       (size_t) ntohl(dd->ft_burst_len));
820                 if (!rc)
821                         seq->rec_data = fsp->xfer_len;
822         } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
823                 /*
824                  * received a DATA frame
825                  * next we will copy the data to the system buffer
826                  */
827                 WARN_ON(fr_len(fp) < sizeof(*fh));      /* len may be 0 */
828                 fc_fcp_recv_data(fsp, fp);
829                 seq->rec_data = fsp->xfer_contig_end;
830         } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
831                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
832
833                 fc_fcp_resp(fsp, fp);
834         } else {
835                 FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
836         }
837 unlock:
838         fc_fcp_unlock_pkt(fsp);
839 out:
840         fc_frame_free(fp);
841 }
842
843 /**
844  * fc_fcp_resp() - Handler for FCP responses
845  * @fsp: The FCP packet the response is for
846  * @fp:  The response frame
847  */
848 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
849 {
850         struct fc_frame_header *fh;
851         struct fcp_resp *fc_rp;
852         struct fcp_resp_ext *rp_ex;
853         struct fcp_resp_rsp_info *fc_rp_info;
854         u32 plen;
855         u32 expected_len;
856         u32 respl = 0;
857         u32 snsl = 0;
858         u8 flags = 0;
859
860         plen = fr_len(fp);
861         fh = (struct fc_frame_header *)fr_hdr(fp);
862         if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
863                 goto len_err;
864         plen -= sizeof(*fh);
865         fc_rp = (struct fcp_resp *)(fh + 1);
866         fsp->cdb_status = fc_rp->fr_status;
867         flags = fc_rp->fr_flags;
868         fsp->scsi_comp_flags = flags;
869         expected_len = fsp->data_len;
870
871         /* if ddp, update xfer len */
872         fc_fcp_ddp_done(fsp);
873
874         if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
875                 rp_ex = (void *)(fc_rp + 1);
876                 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
877                         if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
878                                 goto len_err;
879                         fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
880                         if (flags & FCP_RSP_LEN_VAL) {
881                                 respl = ntohl(rp_ex->fr_rsp_len);
882                                 if ((respl != FCP_RESP_RSP_INFO_LEN4) &&
883                                     (respl != FCP_RESP_RSP_INFO_LEN8))
884                                         goto len_err;
885                                 if (fsp->wait_for_comp) {
886                                         /* Abuse cdb_status for rsp code */
887                                         fsp->cdb_status = fc_rp_info->rsp_code;
888                                         complete(&fsp->tm_done);
889                                         /*
890                                          * tmfs will not have any scsi cmd so
891                                          * exit here
892                                          */
893                                         return;
894                                 }
895                         }
896                         if (flags & FCP_SNS_LEN_VAL) {
897                                 snsl = ntohl(rp_ex->fr_sns_len);
898                                 if (snsl > SCSI_SENSE_BUFFERSIZE)
899                                         snsl = SCSI_SENSE_BUFFERSIZE;
900                                 memcpy(fsp->cmd->sense_buffer,
901                                        (char *)fc_rp_info + respl, snsl);
902                         }
903                 }
904                 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
905                         if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
906                                 goto len_err;
907                         if (flags & FCP_RESID_UNDER) {
908                                 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
909                                 /*
910                                  * The cmnd->underflow is the minimum number of
911                                  * bytes that must be transferred for this
912                                  * command.  Provided a sense condition is not
913                                  * present, make sure the actual amount
914                                  * transferred is at least the underflow value
915                                  * or fail.
916                                  */
917                                 if (!(flags & FCP_SNS_LEN_VAL) &&
918                                     (fc_rp->fr_status == 0) &&
919                                     (scsi_bufflen(fsp->cmd) -
920                                      fsp->scsi_resid) < fsp->cmd->underflow)
921                                         goto err;
922                                 expected_len -= fsp->scsi_resid;
923                         } else {
924                                 fsp->status_code = FC_ERROR;
925                         }
926                 }
927         }
928         fsp->state |= FC_SRB_RCV_STATUS;
929
930         /*
931          * Check for missing or extra data frames.
932          */
933         if (unlikely(fsp->cdb_status == SAM_STAT_GOOD &&
934                      fsp->xfer_len != expected_len)) {
935                 if (fsp->xfer_len < expected_len) {
936                         /*
937                          * Some data may be queued locally,
938                          * Wait a at least one jiffy to see if it is delivered.
939                          * If this expires without data, we may do SRR.
940                          */
941                         if (fsp->lp->qfull) {
942                                 FC_FCP_DBG(fsp, "tgt %6.6x queue busy retry\n",
943                                            fsp->rport->port_id);
944                                 return;
945                         }
946                         FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx data underrun "
947                                    "len %x, data len %x\n",
948                                    fsp->rport->port_id,
949                                    fsp->xfer_len, expected_len, fsp->data_len);
950                         fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
951                         return;
952                 }
953                 fsp->status_code = FC_DATA_OVRRUN;
954                 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
955                            "len %x, data len %x\n",
956                            fsp->rport->port_id,
957                            fsp->xfer_len, expected_len, fsp->data_len);
958         }
959         fc_fcp_complete_locked(fsp);
960         return;
961
962 len_err:
963         FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
964                    "snsl %u\n", flags, fr_len(fp), respl, snsl);
965 err:
966         fsp->status_code = FC_ERROR;
967         fc_fcp_complete_locked(fsp);
968 }
969
970 /**
971  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
972  *                            fcp_pkt lock held
973  * @fsp: The FCP packet to be completed
974  *
975  * This function may sleep if a timer is pending. The packet lock must be
976  * held, and the host lock must not be held.
977  */
978 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
979 {
980         struct fc_lport *lport = fsp->lp;
981         struct fc_seq *seq;
982         struct fc_exch *ep;
983         u32 f_ctl;
984
985         if (fsp->state & FC_SRB_ABORT_PENDING)
986                 return;
987
988         if (fsp->state & FC_SRB_ABORTED) {
989                 if (!fsp->status_code)
990                         fsp->status_code = FC_CMD_ABORTED;
991         } else {
992                 /*
993                  * Test for transport underrun, independent of response
994                  * underrun status.
995                  */
996                 if (fsp->cdb_status == SAM_STAT_GOOD &&
997                     fsp->xfer_len < fsp->data_len && !fsp->io_status &&
998                     (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
999                      fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
1000                         FC_FCP_DBG(fsp, "data underrun, xfer %zx data %x\n",
1001                                     fsp->xfer_len, fsp->data_len);
1002                         fsp->status_code = FC_DATA_UNDRUN;
1003                 }
1004         }
1005
1006         seq = fsp->seq_ptr;
1007         if (seq) {
1008                 fsp->seq_ptr = NULL;
1009                 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
1010                         struct fc_frame *conf_frame;
1011                         struct fc_seq *csp;
1012
1013                         csp = fc_seq_start_next(seq);
1014                         conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
1015                         if (conf_frame) {
1016                                 f_ctl = FC_FC_SEQ_INIT;
1017                                 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
1018                                 ep = fc_seq_exch(seq);
1019                                 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
1020                                                ep->did, ep->sid,
1021                                                FC_TYPE_FCP, f_ctl, 0);
1022                                 fc_seq_send(lport, csp, conf_frame);
1023                         }
1024                 }
1025                 fc_exch_done(seq);
1026         }
1027         /*
1028          * Some resets driven by SCSI are not I/Os and do not have
1029          * SCSI commands associated with the requests. We should not
1030          * call I/O completion if we do not have a SCSI command.
1031          */
1032         if (fsp->cmd)
1033                 fc_io_compl(fsp);
1034 }
1035
1036 /**
1037  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
1038  * @fsp:   The FCP packet whose exchanges should be canceled
1039  * @error: The reason for the cancellation
1040  */
1041 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
1042 {
1043         if (fsp->seq_ptr) {
1044                 fc_exch_done(fsp->seq_ptr);
1045                 fsp->seq_ptr = NULL;
1046         }
1047         fsp->status_code = error;
1048 }
1049
1050 /**
1051  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1052  * @lport: The local port whose exchanges should be canceled
1053  * @id:    The target's ID
1054  * @lun:   The LUN
1055  * @error: The reason for cancellation
1056  *
1057  * If lun or id is -1, they are ignored.
1058  */
1059 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1060                                     unsigned int lun, int error)
1061 {
1062         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1063         struct fc_fcp_pkt *fsp;
1064         struct scsi_cmnd *sc_cmd;
1065         unsigned long flags;
1066
1067         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1068 restart:
1069         list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1070                 sc_cmd = fsp->cmd;
1071                 if (id != -1 && scmd_id(sc_cmd) != id)
1072                         continue;
1073
1074                 if (lun != -1 && sc_cmd->device->lun != lun)
1075                         continue;
1076
1077                 fc_fcp_pkt_hold(fsp);
1078                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1079
1080                 spin_lock_bh(&fsp->scsi_pkt_lock);
1081                 if (!(fsp->state & FC_SRB_COMPL)) {
1082                         fsp->state |= FC_SRB_COMPL;
1083                         /*
1084                          * TODO: dropping scsi_pkt_lock and then reacquiring
1085                          * again around fc_fcp_cleanup_cmd() is required,
1086                          * since fc_fcp_cleanup_cmd() calls into
1087                          * fc_seq_set_resp() and that func preempts cpu using
1088                          * schedule. May be schedule and related code should be
1089                          * removed instead of unlocking here to avoid scheduling
1090                          * while atomic bug.
1091                          */
1092                         spin_unlock_bh(&fsp->scsi_pkt_lock);
1093
1094                         fc_fcp_cleanup_cmd(fsp, error);
1095
1096                         spin_lock_bh(&fsp->scsi_pkt_lock);
1097                         fc_io_compl(fsp);
1098                 }
1099                 spin_unlock_bh(&fsp->scsi_pkt_lock);
1100
1101                 fc_fcp_pkt_release(fsp);
1102                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1103                 /*
1104                  * while we dropped the lock multiple pkts could
1105                  * have been released, so we have to start over.
1106                  */
1107                 goto restart;
1108         }
1109         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1110 }
1111
1112 /**
1113  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1114  * @lport: The local port whose exchanges are to be aborted
1115  */
1116 static void fc_fcp_abort_io(struct fc_lport *lport)
1117 {
1118         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1119 }
1120
1121 /**
1122  * fc_fcp_pkt_send() - Send a fcp_pkt
1123  * @lport: The local port to send the FCP packet on
1124  * @fsp:   The FCP packet to send
1125  *
1126  * Return:  Zero for success and -1 for failure
1127  * Locks:   Called without locks held
1128  */
1129 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1130 {
1131         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1132         unsigned long flags;
1133         int rc;
1134
1135         libfc_priv(fsp->cmd)->fsp = fsp;
1136         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1137         fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1138
1139         int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1140         memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1141
1142         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1143         list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1144         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1145         rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1146         if (unlikely(rc)) {
1147                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1148                 libfc_priv(fsp->cmd)->fsp = NULL;
1149                 list_del(&fsp->list);
1150                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1151         }
1152
1153         return rc;
1154 }
1155
1156 /**
1157  * fc_fcp_cmd_send() - Send a FCP command
1158  * @lport: The local port to send the command on
1159  * @fsp:   The FCP packet the command is on
1160  * @resp:  The handler for the response
1161  */
1162 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1163                            void (*resp)(struct fc_seq *,
1164                                         struct fc_frame *fp,
1165                                         void *arg))
1166 {
1167         struct fc_frame *fp;
1168         struct fc_seq *seq;
1169         struct fc_rport *rport;
1170         struct fc_rport_libfc_priv *rpriv;
1171         const size_t len = sizeof(fsp->cdb_cmd);
1172         int rc = 0;
1173
1174         if (fc_fcp_lock_pkt(fsp))
1175                 return 0;
1176
1177         fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1178         if (!fp) {
1179                 rc = -1;
1180                 goto unlock;
1181         }
1182
1183         memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1184         fr_fsp(fp) = fsp;
1185         rport = fsp->rport;
1186         fsp->max_payload = rport->maxframe_size;
1187         rpriv = rport->dd_data;
1188
1189         fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1190                        rpriv->local_port->port_id, FC_TYPE_FCP,
1191                        FC_FCTL_REQ, 0);
1192
1193         seq = fc_exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy, fsp, 0);
1194         if (!seq) {
1195                 rc = -1;
1196                 goto unlock;
1197         }
1198         fsp->seq_ptr = seq;
1199         fc_fcp_pkt_hold(fsp);   /* hold for fc_fcp_pkt_destroy */
1200
1201         fsp->timer.function = fc_fcp_timeout;
1202         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1203                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1204
1205 unlock:
1206         fc_fcp_unlock_pkt(fsp);
1207         return rc;
1208 }
1209
1210 /**
1211  * fc_fcp_error() - Handler for FCP layer errors
1212  * @fsp: The FCP packet the error is on
1213  * @fp:  The frame that has errored
1214  */
1215 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1216 {
1217         int error = PTR_ERR(fp);
1218
1219         if (fc_fcp_lock_pkt(fsp))
1220                 return;
1221
1222         if (error == -FC_EX_CLOSED) {
1223                 fc_fcp_retry_cmd(fsp, FC_ERROR);
1224                 goto unlock;
1225         }
1226
1227         /*
1228          * clear abort pending, because the lower layer
1229          * decided to force completion.
1230          */
1231         fsp->state &= ~FC_SRB_ABORT_PENDING;
1232         fsp->status_code = FC_CMD_PLOGO;
1233         fc_fcp_complete_locked(fsp);
1234 unlock:
1235         fc_fcp_unlock_pkt(fsp);
1236 }
1237
1238 /**
1239  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1240  * @fsp:   The FCP packet to abort on
1241  *
1242  * Called to send an abort and then wait for abort completion
1243  */
1244 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1245 {
1246         int rc = FAILED;
1247         unsigned long ticks_left;
1248
1249         FC_FCP_DBG(fsp, "pkt abort state %x\n", fsp->state);
1250         if (fc_fcp_send_abort(fsp)) {
1251                 FC_FCP_DBG(fsp, "failed to send abort\n");
1252                 return FAILED;
1253         }
1254
1255         if (fsp->state & FC_SRB_ABORTED) {
1256                 FC_FCP_DBG(fsp, "target abort cmd  completed\n");
1257                 return SUCCESS;
1258         }
1259
1260         init_completion(&fsp->tm_done);
1261         fsp->wait_for_comp = 1;
1262
1263         spin_unlock_bh(&fsp->scsi_pkt_lock);
1264         ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1265                                                         FC_SCSI_TM_TOV);
1266         spin_lock_bh(&fsp->scsi_pkt_lock);
1267         fsp->wait_for_comp = 0;
1268
1269         if (!ticks_left) {
1270                 FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1271         } else if (fsp->state & FC_SRB_ABORTED) {
1272                 FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1273                 rc = SUCCESS;
1274                 fc_fcp_complete_locked(fsp);
1275         }
1276
1277         return rc;
1278 }
1279
1280 /**
1281  * fc_lun_reset_send() - Send LUN reset command
1282  * @t: Timer context used to fetch the FSP packet
1283  */
1284 static void fc_lun_reset_send(struct timer_list *t)
1285 {
1286         struct fc_fcp_pkt *fsp = from_timer(fsp, t, timer);
1287         struct fc_lport *lport = fsp->lp;
1288
1289         if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1290                 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1291                         return;
1292                 if (fc_fcp_lock_pkt(fsp))
1293                         return;
1294                 fsp->timer.function = fc_lun_reset_send;
1295                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1296                 fc_fcp_unlock_pkt(fsp);
1297         }
1298 }
1299
1300 /**
1301  * fc_lun_reset() - Send a LUN RESET command to a device
1302  *                  and wait for the reply
1303  * @lport: The local port to sent the command on
1304  * @fsp:   The FCP packet that identifies the LUN to be reset
1305  * @id:    The SCSI command ID
1306  * @lun:   The LUN ID to be reset
1307  */
1308 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1309                         unsigned int id, unsigned int lun)
1310 {
1311         int rc;
1312
1313         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1314         fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1315         int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1316
1317         fsp->wait_for_comp = 1;
1318         init_completion(&fsp->tm_done);
1319
1320         fc_lun_reset_send(&fsp->timer);
1321
1322         /*
1323          * wait for completion of reset
1324          * after that make sure all commands are terminated
1325          */
1326         rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1327
1328         spin_lock_bh(&fsp->scsi_pkt_lock);
1329         fsp->state |= FC_SRB_COMPL;
1330         spin_unlock_bh(&fsp->scsi_pkt_lock);
1331
1332         del_timer_sync(&fsp->timer);
1333
1334         spin_lock_bh(&fsp->scsi_pkt_lock);
1335         if (fsp->seq_ptr) {
1336                 fc_exch_done(fsp->seq_ptr);
1337                 fsp->seq_ptr = NULL;
1338         }
1339         fsp->wait_for_comp = 0;
1340         spin_unlock_bh(&fsp->scsi_pkt_lock);
1341
1342         if (!rc) {
1343                 FC_SCSI_DBG(lport, "lun reset failed\n");
1344                 return FAILED;
1345         }
1346
1347         /* cdb_status holds the tmf's rsp code */
1348         if (fsp->cdb_status != FCP_TMF_CMPL)
1349                 return FAILED;
1350
1351         FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1352         fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1353         return SUCCESS;
1354 }
1355
1356 /**
1357  * fc_tm_done() - Task Management response handler
1358  * @seq: The sequence that the response is on
1359  * @fp:  The response frame
1360  * @arg: The FCP packet the response is for
1361  */
1362 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1363 {
1364         struct fc_fcp_pkt *fsp = arg;
1365         struct fc_frame_header *fh;
1366
1367         if (IS_ERR(fp)) {
1368                 /*
1369                  * If there is an error just let it timeout or wait
1370                  * for TMF to be aborted if it timedout.
1371                  *
1372                  * scsi-eh will escalate for when either happens.
1373                  */
1374                 return;
1375         }
1376
1377         if (fc_fcp_lock_pkt(fsp))
1378                 goto out;
1379
1380         /*
1381          * raced with eh timeout handler.
1382          */
1383         if (!fsp->seq_ptr || !fsp->wait_for_comp)
1384                 goto out_unlock;
1385
1386         fh = fc_frame_header_get(fp);
1387         if (fh->fh_type != FC_TYPE_BLS)
1388                 fc_fcp_resp(fsp, fp);
1389         fsp->seq_ptr = NULL;
1390         fc_exch_done(seq);
1391 out_unlock:
1392         fc_fcp_unlock_pkt(fsp);
1393 out:
1394         fc_frame_free(fp);
1395 }
1396
1397 /**
1398  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1399  * @lport: The local port to be cleaned up
1400  */
1401 static void fc_fcp_cleanup(struct fc_lport *lport)
1402 {
1403         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1404 }
1405
1406 /**
1407  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1408  * @t: Timer context used to fetch the FSP packet
1409  *
1410  * If REC is supported then just issue it and return. The REC exchange will
1411  * complete or time out and recovery can continue at that point. Otherwise,
1412  * if the response has been received without all the data it has been
1413  * ER_TIMEOUT since the response was received. If the response has not been
1414  * received we see if data was received recently. If it has been then we
1415  * continue waiting, otherwise, we abort the command.
1416  */
1417 static void fc_fcp_timeout(struct timer_list *t)
1418 {
1419         struct fc_fcp_pkt *fsp = from_timer(fsp, t, timer);
1420         struct fc_rport *rport = fsp->rport;
1421         struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1422
1423         if (fc_fcp_lock_pkt(fsp))
1424                 return;
1425
1426         if (fsp->cdb_cmd.fc_tm_flags)
1427                 goto unlock;
1428
1429         if (fsp->lp->qfull) {
1430                 FC_FCP_DBG(fsp, "fcp timeout, resetting timer delay %d\n",
1431                            fsp->timer_delay);
1432                 fsp->timer.function = fc_fcp_timeout;
1433                 fc_fcp_timer_set(fsp, fsp->timer_delay);
1434                 goto unlock;
1435         }
1436         FC_FCP_DBG(fsp, "fcp timeout, delay %d flags %x state %x\n",
1437                    fsp->timer_delay, rpriv->flags, fsp->state);
1438         fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1439
1440         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1441                 fc_fcp_rec(fsp);
1442         else if (fsp->state & FC_SRB_RCV_STATUS)
1443                 fc_fcp_complete_locked(fsp);
1444         else
1445                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1446         fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1447 unlock:
1448         fc_fcp_unlock_pkt(fsp);
1449 }
1450
1451 /**
1452  * fc_fcp_rec() - Send a REC ELS request
1453  * @fsp: The FCP packet to send the REC request on
1454  */
1455 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1456 {
1457         struct fc_lport *lport;
1458         struct fc_frame *fp;
1459         struct fc_rport *rport;
1460         struct fc_rport_libfc_priv *rpriv;
1461
1462         lport = fsp->lp;
1463         rport = fsp->rport;
1464         rpriv = rport->dd_data;
1465         if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1466                 fsp->status_code = FC_HRD_ERROR;
1467                 fsp->io_status = 0;
1468                 fc_fcp_complete_locked(fsp);
1469                 return;
1470         }
1471
1472         fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1473         if (!fp)
1474                 goto retry;
1475
1476         fr_seq(fp) = fsp->seq_ptr;
1477         fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1478                        rpriv->local_port->port_id, FC_TYPE_ELS,
1479                        FC_FCTL_REQ, 0);
1480         if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1481                                  fc_fcp_rec_resp, fsp,
1482                                  2 * lport->r_a_tov)) {
1483                 fc_fcp_pkt_hold(fsp);           /* hold while REC outstanding */
1484                 return;
1485         }
1486 retry:
1487         if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1488                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1489         else
1490                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1491 }
1492
1493 /**
1494  * fc_fcp_rec_resp() - Handler for REC ELS responses
1495  * @seq: The sequence the response is on
1496  * @fp:  The response frame
1497  * @arg: The FCP packet the response is on
1498  *
1499  * If the response is a reject then the scsi layer will handle
1500  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1501  * set the timeout and return. If the I/O was completed then complete the
1502  * exchange and tell the SCSI layer.
1503  */
1504 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1505 {
1506         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1507         struct fc_els_rec_acc *recp;
1508         struct fc_els_ls_rjt *rjt;
1509         u32 e_stat;
1510         u8 opcode;
1511         u32 offset;
1512         enum dma_data_direction data_dir;
1513         enum fc_rctl r_ctl;
1514         struct fc_rport_libfc_priv *rpriv;
1515
1516         if (IS_ERR(fp)) {
1517                 fc_fcp_rec_error(fsp, fp);
1518                 return;
1519         }
1520
1521         if (fc_fcp_lock_pkt(fsp))
1522                 goto out;
1523
1524         fsp->recov_retry = 0;
1525         opcode = fc_frame_payload_op(fp);
1526         if (opcode == ELS_LS_RJT) {
1527                 rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1528                 switch (rjt->er_reason) {
1529                 default:
1530                         FC_FCP_DBG(fsp,
1531                                    "device %x invalid REC reject %d/%d\n",
1532                                    fsp->rport->port_id, rjt->er_reason,
1533                                    rjt->er_explan);
1534                         fallthrough;
1535                 case ELS_RJT_UNSUP:
1536                         FC_FCP_DBG(fsp, "device does not support REC\n");
1537                         rpriv = fsp->rport->dd_data;
1538                         /*
1539                          * if we do not spport RECs or got some bogus
1540                          * reason then resetup timer so we check for
1541                          * making progress.
1542                          */
1543                         rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1544                         break;
1545                 case ELS_RJT_LOGIC:
1546                 case ELS_RJT_UNAB:
1547                         FC_FCP_DBG(fsp, "device %x REC reject %d/%d\n",
1548                                    fsp->rport->port_id, rjt->er_reason,
1549                                    rjt->er_explan);
1550                         /*
1551                          * If response got lost or is stuck in the
1552                          * queue somewhere we have no idea if and when
1553                          * the response will be received. So quarantine
1554                          * the xid and retry the command.
1555                          */
1556                         if (rjt->er_explan == ELS_EXPL_OXID_RXID) {
1557                                 struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1558                                 ep->state |= FC_EX_QUARANTINE;
1559                                 fsp->state |= FC_SRB_ABORTED;
1560                                 fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1561                                 break;
1562                         }
1563                         fc_fcp_recovery(fsp, FC_TRANS_RESET);
1564                         break;
1565                 }
1566         } else if (opcode == ELS_LS_ACC) {
1567                 if (fsp->state & FC_SRB_ABORTED)
1568                         goto unlock_out;
1569
1570                 data_dir = fsp->cmd->sc_data_direction;
1571                 recp = fc_frame_payload_get(fp, sizeof(*recp));
1572                 offset = ntohl(recp->reca_fc4value);
1573                 e_stat = ntohl(recp->reca_e_stat);
1574
1575                 if (e_stat & ESB_ST_COMPLETE) {
1576
1577                         /*
1578                          * The exchange is complete.
1579                          *
1580                          * For output, we must've lost the response.
1581                          * For input, all data must've been sent.
1582                          * We lost may have lost the response
1583                          * (and a confirmation was requested) and maybe
1584                          * some data.
1585                          *
1586                          * If all data received, send SRR
1587                          * asking for response.  If partial data received,
1588                          * or gaps, SRR requests data at start of gap.
1589                          * Recovery via SRR relies on in-order-delivery.
1590                          */
1591                         if (data_dir == DMA_TO_DEVICE) {
1592                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1593                         } else if (fsp->xfer_contig_end == offset) {
1594                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1595                         } else {
1596                                 offset = fsp->xfer_contig_end;
1597                                 r_ctl = FC_RCTL_DD_SOL_DATA;
1598                         }
1599                         fc_fcp_srr(fsp, r_ctl, offset);
1600                 } else if (e_stat & ESB_ST_SEQ_INIT) {
1601                         /*
1602                          * The remote port has the initiative, so just
1603                          * keep waiting for it to complete.
1604                          */
1605                         fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1606                 } else {
1607
1608                         /*
1609                          * The exchange is incomplete, we have seq. initiative.
1610                          * Lost response with requested confirmation,
1611                          * lost confirmation, lost transfer ready or
1612                          * lost write data.
1613                          *
1614                          * For output, if not all data was received, ask
1615                          * for transfer ready to be repeated.
1616                          *
1617                          * If we received or sent all the data, send SRR to
1618                          * request response.
1619                          *
1620                          * If we lost a response, we may have lost some read
1621                          * data as well.
1622                          */
1623                         r_ctl = FC_RCTL_DD_SOL_DATA;
1624                         if (data_dir == DMA_TO_DEVICE) {
1625                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1626                                 if (offset < fsp->data_len)
1627                                         r_ctl = FC_RCTL_DD_DATA_DESC;
1628                         } else if (offset == fsp->xfer_contig_end) {
1629                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1630                         } else if (fsp->xfer_contig_end < offset) {
1631                                 offset = fsp->xfer_contig_end;
1632                         }
1633                         fc_fcp_srr(fsp, r_ctl, offset);
1634                 }
1635         }
1636 unlock_out:
1637         fc_fcp_unlock_pkt(fsp);
1638 out:
1639         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1640         fc_frame_free(fp);
1641 }
1642
1643 /**
1644  * fc_fcp_rec_error() - Handler for REC errors
1645  * @fsp: The FCP packet the error is on
1646  * @fp:  The REC frame
1647  */
1648 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1649 {
1650         int error = PTR_ERR(fp);
1651
1652         if (fc_fcp_lock_pkt(fsp))
1653                 goto out;
1654
1655         switch (error) {
1656         case -FC_EX_CLOSED:
1657                 FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange closed\n",
1658                            fsp, fsp->rport->port_id);
1659                 fc_fcp_retry_cmd(fsp, FC_ERROR);
1660                 break;
1661
1662         default:
1663                 FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1664                            fsp, fsp->rport->port_id, error);
1665                 fsp->status_code = FC_CMD_PLOGO;
1666                 fallthrough;
1667
1668         case -FC_EX_TIMEOUT:
1669                 /*
1670                  * Assume REC or LS_ACC was lost.
1671                  * The exchange manager will have aborted REC, so retry.
1672                  */
1673                 FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange timeout retry %d/%d\n",
1674                            fsp, fsp->rport->port_id, fsp->recov_retry,
1675                            FC_MAX_RECOV_RETRY);
1676                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1677                         fc_fcp_rec(fsp);
1678                 else
1679                         fc_fcp_recovery(fsp, FC_TIMED_OUT);
1680                 break;
1681         }
1682         fc_fcp_unlock_pkt(fsp);
1683 out:
1684         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1685 }
1686
1687 /**
1688  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1689  * @fsp: The FCP pkt that needs to be aborted
1690  * @code: The FCP status code to set
1691  */
1692 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1693 {
1694         FC_FCP_DBG(fsp, "start recovery code %x\n", code);
1695         fsp->status_code = code;
1696         fsp->cdb_status = 0;
1697         fsp->io_status = 0;
1698         if (!fsp->cmd)
1699                 /*
1700                  * Only abort non-scsi commands; otherwise let the
1701                  * scsi command timer fire and scsi-ml escalate.
1702                  */
1703                 fc_fcp_send_abort(fsp);
1704 }
1705
1706 /**
1707  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1708  * @fsp:   The FCP packet the SRR is to be sent on
1709  * @r_ctl: The R_CTL field for the SRR request
1710  * @offset: The SRR relative offset
1711  * This is called after receiving status but insufficient data, or
1712  * when expecting status but the request has timed out.
1713  */
1714 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1715 {
1716         struct fc_lport *lport = fsp->lp;
1717         struct fc_rport *rport;
1718         struct fc_rport_libfc_priv *rpriv;
1719         struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1720         struct fc_seq *seq;
1721         struct fcp_srr *srr;
1722         struct fc_frame *fp;
1723
1724         rport = fsp->rport;
1725         rpriv = rport->dd_data;
1726
1727         if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1728             rpriv->rp_state != RPORT_ST_READY)
1729                 goto retry;                     /* shouldn't happen */
1730         fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1731         if (!fp)
1732                 goto retry;
1733
1734         srr = fc_frame_payload_get(fp, sizeof(*srr));
1735         memset(srr, 0, sizeof(*srr));
1736         srr->srr_op = ELS_SRR;
1737         srr->srr_ox_id = htons(ep->oxid);
1738         srr->srr_rx_id = htons(ep->rxid);
1739         srr->srr_r_ctl = r_ctl;
1740         srr->srr_rel_off = htonl(offset);
1741
1742         fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1743                        rpriv->local_port->port_id, FC_TYPE_FCP,
1744                        FC_FCTL_REQ, 0);
1745
1746         seq = fc_exch_seq_send(lport, fp, fc_fcp_srr_resp,
1747                                fc_fcp_pkt_destroy,
1748                                fsp, get_fsp_rec_tov(fsp));
1749         if (!seq)
1750                 goto retry;
1751
1752         fsp->recov_seq = seq;
1753         fsp->xfer_len = offset;
1754         fsp->xfer_contig_end = offset;
1755         fsp->state &= ~FC_SRB_RCV_STATUS;
1756         fc_fcp_pkt_hold(fsp);           /* hold for outstanding SRR */
1757         return;
1758 retry:
1759         fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1760 }
1761
1762 /**
1763  * fc_fcp_srr_resp() - Handler for SRR response
1764  * @seq: The sequence the SRR is on
1765  * @fp:  The SRR frame
1766  * @arg: The FCP packet the SRR is on
1767  */
1768 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1769 {
1770         struct fc_fcp_pkt *fsp = arg;
1771         struct fc_frame_header *fh;
1772
1773         if (IS_ERR(fp)) {
1774                 fc_fcp_srr_error(fsp, fp);
1775                 return;
1776         }
1777
1778         if (fc_fcp_lock_pkt(fsp))
1779                 goto out;
1780
1781         fh = fc_frame_header_get(fp);
1782         /*
1783          * BUG? fc_fcp_srr_error calls fc_exch_done which would release
1784          * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1785          * then fc_exch_timeout would be sending an abort. The fc_exch_done
1786          * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1787          * an abort response though.
1788          */
1789         if (fh->fh_type == FC_TYPE_BLS) {
1790                 fc_fcp_unlock_pkt(fsp);
1791                 return;
1792         }
1793
1794         switch (fc_frame_payload_op(fp)) {
1795         case ELS_LS_ACC:
1796                 fsp->recov_retry = 0;
1797                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1798                 break;
1799         case ELS_LS_RJT:
1800         default:
1801                 fc_fcp_recovery(fsp, FC_ERROR);
1802                 break;
1803         }
1804         fc_fcp_unlock_pkt(fsp);
1805 out:
1806         fc_exch_done(seq);
1807         fc_frame_free(fp);
1808 }
1809
1810 /**
1811  * fc_fcp_srr_error() - Handler for SRR errors
1812  * @fsp: The FCP packet that the SRR error is on
1813  * @fp:  The SRR frame
1814  */
1815 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1816 {
1817         if (fc_fcp_lock_pkt(fsp))
1818                 goto out;
1819         switch (PTR_ERR(fp)) {
1820         case -FC_EX_TIMEOUT:
1821                 FC_FCP_DBG(fsp, "SRR timeout, retries %d\n", fsp->recov_retry);
1822                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1823                         fc_fcp_rec(fsp);
1824                 else
1825                         fc_fcp_recovery(fsp, FC_TIMED_OUT);
1826                 break;
1827         case -FC_EX_CLOSED:                     /* e.g., link failure */
1828                 FC_FCP_DBG(fsp, "SRR error, exchange closed\n");
1829                 fallthrough;
1830         default:
1831                 fc_fcp_retry_cmd(fsp, FC_ERROR);
1832                 break;
1833         }
1834         fc_fcp_unlock_pkt(fsp);
1835 out:
1836         fc_exch_done(fsp->recov_seq);
1837 }
1838
1839 /**
1840  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1841  * @lport: The local port to be checked
1842  */
1843 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1844 {
1845         /* lock ? */
1846         return (lport->state == LPORT_ST_READY) &&
1847                 lport->link_up && !lport->qfull;
1848 }
1849
1850 /**
1851  * fc_queuecommand() - The queuecommand function of the SCSI template
1852  * @shost: The Scsi_Host that the command was issued to
1853  * @sc_cmd:   The scsi_cmnd to be executed
1854  *
1855  * This is the i/o strategy routine, called by the SCSI layer.
1856  */
1857 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1858 {
1859         struct fc_lport *lport = shost_priv(shost);
1860         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1861         struct fc_fcp_pkt *fsp;
1862         int rval;
1863         int rc = 0;
1864
1865         rval = fc_remote_port_chkready(rport);
1866         if (rval) {
1867                 sc_cmd->result = rval;
1868                 scsi_done(sc_cmd);
1869                 return 0;
1870         }
1871
1872         if (!*(struct fc_remote_port **)rport->dd_data) {
1873                 /*
1874                  * rport is transitioning from blocked/deleted to
1875                  * online
1876                  */
1877                 sc_cmd->result = DID_IMM_RETRY << 16;
1878                 scsi_done(sc_cmd);
1879                 goto out;
1880         }
1881
1882         if (!fc_fcp_lport_queue_ready(lport)) {
1883                 if (lport->qfull) {
1884                         if (fc_fcp_can_queue_ramp_down(lport))
1885                                 shost_printk(KERN_ERR, lport->host,
1886                                              "libfc: queue full, "
1887                                              "reducing can_queue to %d.\n",
1888                                              lport->host->can_queue);
1889                 }
1890                 rc = SCSI_MLQUEUE_HOST_BUSY;
1891                 goto out;
1892         }
1893
1894         fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1895         if (fsp == NULL) {
1896                 rc = SCSI_MLQUEUE_HOST_BUSY;
1897                 goto out;
1898         }
1899
1900         /*
1901          * build the libfc request pkt
1902          */
1903         fsp->cmd = sc_cmd;      /* save the cmd */
1904         fsp->rport = rport;     /* set the remote port ptr */
1905
1906         /*
1907          * set up the transfer length
1908          */
1909         fsp->data_len = scsi_bufflen(sc_cmd);
1910         fsp->xfer_len = 0;
1911
1912         /*
1913          * setup the data direction
1914          */
1915         if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1916                 fsp->req_flags = FC_SRB_READ;
1917                 this_cpu_inc(lport->stats->InputRequests);
1918                 this_cpu_add(lport->stats->InputBytes, fsp->data_len);
1919         } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1920                 fsp->req_flags = FC_SRB_WRITE;
1921                 this_cpu_inc(lport->stats->OutputRequests);
1922                 this_cpu_add(lport->stats->OutputBytes, fsp->data_len);
1923         } else {
1924                 fsp->req_flags = 0;
1925                 this_cpu_inc(lport->stats->ControlRequests);
1926         }
1927
1928         /*
1929          * send it to the lower layer
1930          * if we get -1 return then put the request in the pending
1931          * queue.
1932          */
1933         rval = fc_fcp_pkt_send(lport, fsp);
1934         if (rval != 0) {
1935                 fsp->state = FC_SRB_FREE;
1936                 fc_fcp_pkt_release(fsp);
1937                 rc = SCSI_MLQUEUE_HOST_BUSY;
1938         }
1939 out:
1940         return rc;
1941 }
1942 EXPORT_SYMBOL(fc_queuecommand);
1943
1944 /**
1945  * fc_io_compl() - Handle responses for completed commands
1946  * @fsp: The FCP packet that is complete
1947  *
1948  * Translates fcp_pkt errors to a Linux SCSI errors.
1949  * The fcp packet lock must be held when calling.
1950  */
1951 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1952 {
1953         struct fc_fcp_internal *si;
1954         struct scsi_cmnd *sc_cmd;
1955         struct fc_lport *lport;
1956         unsigned long flags;
1957
1958         /* release outstanding ddp context */
1959         fc_fcp_ddp_done(fsp);
1960
1961         fsp->state |= FC_SRB_COMPL;
1962         if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1963                 spin_unlock_bh(&fsp->scsi_pkt_lock);
1964                 del_timer_sync(&fsp->timer);
1965                 spin_lock_bh(&fsp->scsi_pkt_lock);
1966         }
1967
1968         lport = fsp->lp;
1969         si = fc_get_scsi_internal(lport);
1970
1971         /*
1972          * if can_queue ramp down is done then try can_queue ramp up
1973          * since commands are completing now.
1974          */
1975         if (si->last_can_queue_ramp_down_time)
1976                 fc_fcp_can_queue_ramp_up(lport);
1977
1978         sc_cmd = fsp->cmd;
1979         libfc_priv(sc_cmd)->status = fsp->cdb_status;
1980         switch (fsp->status_code) {
1981         case FC_COMPLETE:
1982                 if (fsp->cdb_status == 0) {
1983                         /*
1984                          * good I/O status
1985                          */
1986                         sc_cmd->result = DID_OK << 16;
1987                         if (fsp->scsi_resid)
1988                                 libfc_priv(sc_cmd)->resid_len = fsp->scsi_resid;
1989                 } else {
1990                         /*
1991                          * transport level I/O was ok but scsi
1992                          * has non zero status
1993                          */
1994                         sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1995                 }
1996                 break;
1997         case FC_ERROR:
1998                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1999                            "due to FC_ERROR\n");
2000                 sc_cmd->result = DID_ERROR << 16;
2001                 break;
2002         case FC_DATA_UNDRUN:
2003                 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
2004                         /*
2005                          * scsi status is good but transport level
2006                          * underrun.
2007                          */
2008                         if (fsp->state & FC_SRB_RCV_STATUS) {
2009                                 sc_cmd->result = DID_OK << 16;
2010                         } else {
2011                                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
2012                                            " due to FC_DATA_UNDRUN (trans)\n");
2013                                 sc_cmd->result = DID_ERROR << 16;
2014                         }
2015                 } else {
2016                         /*
2017                          * scsi got underrun, this is an error
2018                          */
2019                         FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2020                                    "due to FC_DATA_UNDRUN (scsi)\n");
2021                         libfc_priv(sc_cmd)->resid_len = fsp->scsi_resid;
2022                         sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2023                 }
2024                 break;
2025         case FC_DATA_OVRRUN:
2026                 /*
2027                  * overrun is an error
2028                  */
2029                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2030                            "due to FC_DATA_OVRRUN\n");
2031                 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2032                 break;
2033         case FC_CMD_ABORTED:
2034                 if (host_byte(sc_cmd->result) == DID_TIME_OUT)
2035                         FC_FCP_DBG(fsp, "Returning DID_TIME_OUT to scsi-ml "
2036                                    "due to FC_CMD_ABORTED\n");
2037                 else {
2038                         FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2039                                    "due to FC_CMD_ABORTED\n");
2040                         set_host_byte(sc_cmd, DID_ERROR);
2041                 }
2042                 sc_cmd->result |= fsp->io_status;
2043                 break;
2044         case FC_CMD_RESET:
2045                 FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
2046                            "due to FC_CMD_RESET\n");
2047                 sc_cmd->result = (DID_RESET << 16);
2048                 break;
2049         case FC_TRANS_RESET:
2050                 FC_FCP_DBG(fsp, "Returning DID_SOFT_ERROR to scsi-ml "
2051                            "due to FC_TRANS_RESET\n");
2052                 sc_cmd->result = (DID_SOFT_ERROR << 16);
2053                 break;
2054         case FC_HRD_ERROR:
2055                 FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
2056                            "due to FC_HRD_ERROR\n");
2057                 sc_cmd->result = (DID_NO_CONNECT << 16);
2058                 break;
2059         case FC_CRC_ERROR:
2060                 FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
2061                            "due to FC_CRC_ERROR\n");
2062                 sc_cmd->result = (DID_PARITY << 16);
2063                 break;
2064         case FC_TIMED_OUT:
2065                 FC_FCP_DBG(fsp, "Returning DID_TIME_OUT to scsi-ml "
2066                            "due to FC_TIMED_OUT\n");
2067                 sc_cmd->result = (DID_TIME_OUT << 16);
2068                 break;
2069         default:
2070                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2071                            "due to unknown error\n");
2072                 sc_cmd->result = (DID_ERROR << 16);
2073                 break;
2074         }
2075
2076         if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2077                 sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2078
2079         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2080         list_del(&fsp->list);
2081         libfc_priv(sc_cmd)->fsp = NULL;
2082         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2083         scsi_done(sc_cmd);
2084
2085         /* release ref from initial allocation in queue command */
2086         fc_fcp_pkt_release(fsp);
2087 }
2088
2089 /**
2090  * fc_eh_abort() - Abort a command
2091  * @sc_cmd: The SCSI command to abort
2092  *
2093  * From SCSI host template.
2094  * Send an ABTS to the target device and wait for the response.
2095  */
2096 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2097 {
2098         struct fc_fcp_pkt *fsp;
2099         struct fc_lport *lport;
2100         struct fc_fcp_internal *si;
2101         int rc = FAILED;
2102         unsigned long flags;
2103         int rval;
2104
2105         rval = fc_block_scsi_eh(sc_cmd);
2106         if (rval)
2107                 return rval;
2108
2109         lport = shost_priv(sc_cmd->device->host);
2110         if (lport->state != LPORT_ST_READY)
2111                 return rc;
2112         else if (!lport->link_up)
2113                 return rc;
2114
2115         si = fc_get_scsi_internal(lport);
2116         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2117         fsp = libfc_priv(sc_cmd)->fsp;
2118         if (!fsp) {
2119                 /* command completed while scsi eh was setting up */
2120                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2121                 return SUCCESS;
2122         }
2123         /* grab a ref so the fsp and sc_cmd cannot be released from under us */
2124         fc_fcp_pkt_hold(fsp);
2125         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2126
2127         if (fc_fcp_lock_pkt(fsp)) {
2128                 /* completed while we were waiting for timer to be deleted */
2129                 rc = SUCCESS;
2130                 goto release_pkt;
2131         }
2132
2133         rc = fc_fcp_pkt_abort(fsp);
2134         fc_fcp_unlock_pkt(fsp);
2135
2136 release_pkt:
2137         fc_fcp_pkt_release(fsp);
2138         return rc;
2139 }
2140 EXPORT_SYMBOL(fc_eh_abort);
2141
2142 /**
2143  * fc_eh_device_reset() - Reset a single LUN
2144  * @sc_cmd: The SCSI command which identifies the device whose
2145  *          LUN is to be reset
2146  *
2147  * Set from SCSI host template.
2148  */
2149 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2150 {
2151         struct fc_lport *lport;
2152         struct fc_fcp_pkt *fsp;
2153         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2154         int rc = FAILED;
2155         int rval;
2156
2157         rval = fc_block_scsi_eh(sc_cmd);
2158         if (rval)
2159                 return rval;
2160
2161         lport = shost_priv(sc_cmd->device->host);
2162
2163         if (lport->state != LPORT_ST_READY)
2164                 return rc;
2165
2166         FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2167
2168         fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2169         if (fsp == NULL) {
2170                 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2171                 goto out;
2172         }
2173
2174         /*
2175          * Build the libfc request pkt. Do not set the scsi cmnd, because
2176          * the sc passed in is not setup for execution like when sent
2177          * through the queuecommand callout.
2178          */
2179         fsp->rport = rport;     /* set the remote port ptr */
2180
2181         /*
2182          * flush outstanding commands
2183          */
2184         rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2185         fsp->state = FC_SRB_FREE;
2186         fc_fcp_pkt_release(fsp);
2187
2188 out:
2189         return rc;
2190 }
2191 EXPORT_SYMBOL(fc_eh_device_reset);
2192
2193 /**
2194  * fc_eh_host_reset() - Reset a Scsi_Host.
2195  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2196  */
2197 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2198 {
2199         struct Scsi_Host *shost = sc_cmd->device->host;
2200         struct fc_lport *lport = shost_priv(shost);
2201         unsigned long wait_tmo;
2202
2203         FC_SCSI_DBG(lport, "Resetting host\n");
2204
2205         fc_lport_reset(lport);
2206         wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2207         while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2208                                                                wait_tmo))
2209                 msleep(1000);
2210
2211         if (fc_fcp_lport_queue_ready(lport)) {
2212                 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2213                              "on port (%6.6x)\n", lport->port_id);
2214                 return SUCCESS;
2215         } else {
2216                 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2217                              "port (%6.6x) is not ready.\n",
2218                              lport->port_id);
2219                 return FAILED;
2220         }
2221 }
2222 EXPORT_SYMBOL(fc_eh_host_reset);
2223
2224 /**
2225  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2226  * @sdev: The SCSI device that identifies the SCSI host
2227  *
2228  * Configures queue depth based on host's cmd_per_len. If not set
2229  * then we use the libfc default.
2230  */
2231 int fc_slave_alloc(struct scsi_device *sdev)
2232 {
2233         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2234
2235         if (!rport || fc_remote_port_chkready(rport))
2236                 return -ENXIO;
2237
2238         scsi_change_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2239         return 0;
2240 }
2241 EXPORT_SYMBOL(fc_slave_alloc);
2242
2243 /**
2244  * fc_fcp_destroy() - Tear down the FCP layer for a given local port
2245  * @lport: The local port that no longer needs the FCP layer
2246  */
2247 void fc_fcp_destroy(struct fc_lport *lport)
2248 {
2249         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2250
2251         if (!list_empty(&si->scsi_pkt_queue))
2252                 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2253                        "port (%6.6x)\n", lport->port_id);
2254
2255         mempool_destroy(si->scsi_pkt_pool);
2256         kfree(si);
2257         lport->scsi_priv = NULL;
2258 }
2259 EXPORT_SYMBOL(fc_fcp_destroy);
2260
2261 int fc_setup_fcp(void)
2262 {
2263         int rc = 0;
2264
2265         scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2266                                             sizeof(struct fc_fcp_pkt),
2267                                             0, SLAB_HWCACHE_ALIGN, NULL);
2268         if (!scsi_pkt_cachep) {
2269                 printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2270                        "module load failed!");
2271                 rc = -ENOMEM;
2272         }
2273
2274         return rc;
2275 }
2276
2277 void fc_destroy_fcp(void)
2278 {
2279         kmem_cache_destroy(scsi_pkt_cachep);
2280 }
2281
2282 /**
2283  * fc_fcp_init() - Initialize the FCP layer for a local port
2284  * @lport: The local port to initialize the exchange layer for
2285  */
2286 int fc_fcp_init(struct fc_lport *lport)
2287 {
2288         int rc;
2289         struct fc_fcp_internal *si;
2290
2291         if (!lport->tt.fcp_cmd_send)
2292                 lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2293
2294         if (!lport->tt.fcp_cleanup)
2295                 lport->tt.fcp_cleanup = fc_fcp_cleanup;
2296
2297         if (!lport->tt.fcp_abort_io)
2298                 lport->tt.fcp_abort_io = fc_fcp_abort_io;
2299
2300         si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2301         if (!si)
2302                 return -ENOMEM;
2303         lport->scsi_priv = si;
2304         si->max_can_queue = lport->host->can_queue;
2305         INIT_LIST_HEAD(&si->scsi_pkt_queue);
2306         spin_lock_init(&si->scsi_queue_lock);
2307
2308         si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2309         if (!si->scsi_pkt_pool) {
2310                 rc = -ENOMEM;
2311                 goto free_internal;
2312         }
2313         return 0;
2314
2315 free_internal:
2316         kfree(si);
2317         return rc;
2318 }
2319 EXPORT_SYMBOL(fc_fcp_init);