2 * Adaptec AIC79xx device driver for Linux.
4 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $
6 * --------------------------------------------------------------------------
7 * Copyright (c) 1994-2000 Justin T. Gibbs.
8 * Copyright (c) 1997-1999 Doug Ledford
9 * Copyright (c) 2000-2003 Adaptec Inc.
10 * All rights reserved.
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
45 #include "aic79xx_osm.h"
46 #include "aic79xx_inline.h"
47 #include <scsi/scsicam.h>
49 static struct scsi_transport_template *ahd_linux_transport_template = NULL;
51 #include <linux/init.h> /* __setup */
52 #include <linux/mm.h> /* For fetching system memory size */
53 #include <linux/blkdev.h> /* For block_size() */
54 #include <linux/delay.h> /* For ssleep/msleep */
55 #include <linux/device.h>
56 #include <linux/slab.h>
59 * Bucket size for counting good commands in between bad ones.
61 #define AHD_LINUX_ERR_THRESH 1000
64 * Set this to the delay in seconds after SCSI bus reset.
65 * Note, we honor this only for the initial bus reset.
66 * The scsi error recovery code performs its own bus settle
67 * delay handling for error recovery actions.
69 #ifdef CONFIG_AIC79XX_RESET_DELAY_MS
70 #define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS
72 #define AIC79XX_RESET_DELAY 5000
76 * To change the default number of tagged transactions allowed per-device,
77 * add a line to the lilo.conf file like:
78 * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
79 * which will result in the first four devices on the first two
80 * controllers being set to a tagged queue depth of 32.
82 * The tag_commands is an array of 16 to allow for wide and twin adapters.
83 * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
87 uint16_t tag_commands[16]; /* Allow for wide/twin adapters. */
91 * Modify this as you see fit for your system.
93 * 0 tagged queuing disabled
94 * 1 <= n <= 253 n == max tags ever dispatched.
96 * The driver will throttle the number of commands dispatched to a
97 * device if it returns queue full. For devices with a fixed maximum
98 * queue depth, the driver will eventually determine this depth and
99 * lock it in (a console message is printed to indicate that a lock
100 * has occurred). On some devices, queue full is returned for a temporary
101 * resource shortage. These devices will return queue full at varying
102 * depths. The driver will throttle back when the queue fulls occur and
103 * attempt to slowly increase the depth over time as the device recovers
104 * from the resource shortage.
106 * In this example, the first line will disable tagged queueing for all
107 * the devices on the first probed aic79xx adapter.
109 * The second line enables tagged queueing with 4 commands/LUN for IDs
110 * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
111 * driver to attempt to use up to 64 tags for ID 1.
113 * The third line is the same as the first line.
115 * The fourth line disables tagged queueing for devices 0 and 3. It
116 * enables tagged queueing for the other IDs, with 16 commands/LUN
117 * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
118 * IDs 2, 5-7, and 9-15.
122 * NOTE: The below structure is for reference only, the actual structure
123 * to modify in order to change things is just below this comment block.
124 adapter_tag_info_t aic79xx_tag_info[] =
126 {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
127 {{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
128 {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
129 {{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
133 #ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE
134 #define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE
136 #define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE
139 #define AIC79XX_CONFIGED_TAG_COMMANDS { \
140 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
141 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
142 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
143 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
144 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
145 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
146 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
147 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE \
151 * By default, use the number of commands specified by
152 * the users kernel configuration.
154 static adapter_tag_info_t aic79xx_tag_info[] =
156 {AIC79XX_CONFIGED_TAG_COMMANDS},
157 {AIC79XX_CONFIGED_TAG_COMMANDS},
158 {AIC79XX_CONFIGED_TAG_COMMANDS},
159 {AIC79XX_CONFIGED_TAG_COMMANDS},
160 {AIC79XX_CONFIGED_TAG_COMMANDS},
161 {AIC79XX_CONFIGED_TAG_COMMANDS},
162 {AIC79XX_CONFIGED_TAG_COMMANDS},
163 {AIC79XX_CONFIGED_TAG_COMMANDS},
164 {AIC79XX_CONFIGED_TAG_COMMANDS},
165 {AIC79XX_CONFIGED_TAG_COMMANDS},
166 {AIC79XX_CONFIGED_TAG_COMMANDS},
167 {AIC79XX_CONFIGED_TAG_COMMANDS},
168 {AIC79XX_CONFIGED_TAG_COMMANDS},
169 {AIC79XX_CONFIGED_TAG_COMMANDS},
170 {AIC79XX_CONFIGED_TAG_COMMANDS},
171 {AIC79XX_CONFIGED_TAG_COMMANDS}
175 * The I/O cell on the chip is very configurable in respect to its analog
176 * characteristics. Set the defaults here; they can be overriden with
177 * the proper insmod parameters.
179 struct ahd_linux_iocell_opts
185 #define AIC79XX_DEFAULT_PRECOMP 0xFF
186 #define AIC79XX_DEFAULT_SLEWRATE 0xFF
187 #define AIC79XX_DEFAULT_AMPLITUDE 0xFF
188 #define AIC79XX_DEFAULT_IOOPTS \
190 AIC79XX_DEFAULT_PRECOMP, \
191 AIC79XX_DEFAULT_SLEWRATE, \
192 AIC79XX_DEFAULT_AMPLITUDE \
194 #define AIC79XX_PRECOMP_INDEX 0
195 #define AIC79XX_SLEWRATE_INDEX 1
196 #define AIC79XX_AMPLITUDE_INDEX 2
197 static struct ahd_linux_iocell_opts aic79xx_iocell_info[] __ro_after_init =
199 AIC79XX_DEFAULT_IOOPTS,
200 AIC79XX_DEFAULT_IOOPTS,
201 AIC79XX_DEFAULT_IOOPTS,
202 AIC79XX_DEFAULT_IOOPTS,
203 AIC79XX_DEFAULT_IOOPTS,
204 AIC79XX_DEFAULT_IOOPTS,
205 AIC79XX_DEFAULT_IOOPTS,
206 AIC79XX_DEFAULT_IOOPTS,
207 AIC79XX_DEFAULT_IOOPTS,
208 AIC79XX_DEFAULT_IOOPTS,
209 AIC79XX_DEFAULT_IOOPTS,
210 AIC79XX_DEFAULT_IOOPTS,
211 AIC79XX_DEFAULT_IOOPTS,
212 AIC79XX_DEFAULT_IOOPTS,
213 AIC79XX_DEFAULT_IOOPTS,
214 AIC79XX_DEFAULT_IOOPTS
218 * There should be a specific return value for this in scsi.h, but
219 * it seems that most drivers ignore it.
221 #define DID_UNDERFLOW DID_ERROR
224 ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
226 printk("(scsi%d:%c:%d:%d): ",
227 ahd->platform_data->host->host_no,
228 scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X',
229 scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1,
230 scb != NULL ? SCB_GET_LUN(scb) : -1);
234 * XXX - these options apply unilaterally to _all_ adapters
235 * cards in the system. This should be fixed. Exceptions to this
236 * rule are noted in the comments.
240 * Skip the scsi bus reset. Non 0 make us skip the reset at startup. This
241 * has no effect on any later resets that might occur due to things like
244 static uint32_t aic79xx_no_reset;
247 * Should we force EXTENDED translation on a controller.
248 * 0 == Use whatever is in the SEEPROM or default to off
249 * 1 == Use whatever is in the SEEPROM or default to on
251 static uint32_t aic79xx_extended;
254 * PCI bus parity checking of the Adaptec controllers. This is somewhat
255 * dubious at best. To my knowledge, this option has never actually
256 * solved a PCI parity problem, but on certain machines with broken PCI
257 * chipset configurations, it can generate tons of false error messages.
258 * It's included in the driver for completeness.
259 * 0 = Shut off PCI parity check
260 * non-0 = Enable PCI parity check
262 * NOTE: you can't actually pass -1 on the lilo prompt. So, to set this
263 * variable to -1 you would actually want to simply pass the variable
264 * name without a number. That will invert the 0 which will result in
267 static uint32_t aic79xx_pci_parity = ~0;
270 * There are lots of broken chipsets in the world. Some of them will
271 * violate the PCI spec when we issue byte sized memory writes to our
272 * controller. I/O mapped register access, if allowed by the given
273 * platform, will work in almost all cases.
275 uint32_t aic79xx_allow_memio = ~0;
278 * So that we can set how long each device is given as a selection timeout.
279 * The table of values goes like this:
284 * We default to 256ms because some older devices need a longer time
285 * to respond to initial selection.
287 static uint32_t aic79xx_seltime;
290 * Certain devices do not perform any aging on commands. Should the
291 * device be saturated by commands in one portion of the disk, it is
292 * possible for transactions on far away sectors to never be serviced.
293 * To handle these devices, we can periodically send an ordered tag to
294 * force all outstanding transactions to be serviced prior to a new
297 static uint32_t aic79xx_periodic_otag;
299 /* Some storage boxes are using an LSI chip which has a bug making it
300 * impossible to use aic79xx Rev B chip in 320 speeds. The following
301 * storage boxes have been reported to be buggy:
302 * EonStor 3U 16-Bay: U16U-G3A3
303 * EonStor 2U 12-Bay: U12U-G3A3
304 * SentinelRAID: 2500F R5 / R6
305 * SentinelRAID: 2500F R1
306 * SentinelRAID: 2500F/1500F
309 * To get around this LSI bug, you can set your board to 160 mode
310 * or you can enable the SLOWCRC bit.
312 uint32_t aic79xx_slowcrc;
315 * Module information and settable options.
317 static char *aic79xx = NULL;
319 MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>");
320 MODULE_DESCRIPTION("Adaptec AIC790X U320 SCSI Host Bus Adapter driver");
321 MODULE_LICENSE("Dual BSD/GPL");
322 MODULE_VERSION(AIC79XX_DRIVER_VERSION);
323 module_param(aic79xx, charp, 0444);
324 MODULE_PARM_DESC(aic79xx,
325 "period-delimited options string:\n"
326 " verbose Enable verbose/diagnostic logging\n"
327 " allow_memio Allow device registers to be memory mapped\n"
328 " debug Bitmask of debug values to enable\n"
329 " no_reset Suppress initial bus resets\n"
330 " extended Enable extended geometry on all controllers\n"
331 " periodic_otag Send an ordered tagged transaction\n"
332 " periodically to prevent tag starvation.\n"
333 " This may be required by some older disk\n"
334 " or drives/RAID arrays.\n"
335 " tag_info:<tag_str> Set per-target tag depth\n"
336 " global_tag_depth:<int> Global tag depth for all targets on all buses\n"
337 " slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
338 " precomp:<pcomp_list> Set the signal precompensation (0-7).\n"
339 " amplitude:<int> Set the signal amplitude (0-7).\n"
340 " seltime:<int> Selection Timeout:\n"
341 " (0/256ms,1/128ms,2/64ms,3/32ms)\n"
342 " slowcrc Turn on the SLOWCRC bit (Rev B only)\n"
344 " Sample modprobe configuration file:\n"
345 " # Enable verbose logging\n"
346 " # Set tag depth on Controller 2/Target 2 to 10 tags\n"
347 " # Shorten the selection timeout to 128ms\n"
349 " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
352 static void ahd_linux_handle_scsi_status(struct ahd_softc *,
353 struct scsi_device *,
355 static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd,
356 struct scsi_cmnd *cmd);
357 static int ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd);
358 static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd);
359 static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd,
360 struct ahd_devinfo *devinfo);
361 static void ahd_linux_device_queue_depth(struct scsi_device *);
362 static int ahd_linux_run_command(struct ahd_softc*,
363 struct ahd_linux_device *,
365 static void ahd_linux_setup_tag_info_global(char *p);
366 static int aic79xx_setup(char *c);
367 static void ahd_freeze_simq(struct ahd_softc *ahd);
368 static void ahd_release_simq(struct ahd_softc *ahd);
370 static int ahd_linux_unit;
373 /************************** OS Utility Wrappers *******************************/
374 void ahd_delay(long);
379 * udelay on Linux can have problems for
380 * multi-millisecond waits. Wait at most
390 /***************************** Low Level I/O **********************************/
391 uint8_t ahd_inb(struct ahd_softc * ahd, long port);
392 void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
393 void ahd_outw_atomic(struct ahd_softc * ahd,
394 long port, uint16_t val);
395 void ahd_outsb(struct ahd_softc * ahd, long port,
396 uint8_t *, int count);
397 void ahd_insb(struct ahd_softc * ahd, long port,
398 uint8_t *, int count);
401 ahd_inb(struct ahd_softc * ahd, long port)
405 if (ahd->tags[0] == BUS_SPACE_MEMIO) {
406 x = readb(ahd->bshs[0].maddr + port);
408 x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
416 ahd_inw_atomic(struct ahd_softc * ahd, long port)
420 if (ahd->tags[0] == BUS_SPACE_MEMIO) {
421 x = readw(ahd->bshs[0].maddr + port);
423 x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
431 ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
433 if (ahd->tags[0] == BUS_SPACE_MEMIO) {
434 writeb(val, ahd->bshs[0].maddr + port);
436 outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
442 ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
444 if (ahd->tags[0] == BUS_SPACE_MEMIO) {
445 writew(val, ahd->bshs[0].maddr + port);
447 outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
453 ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
458 * There is probably a more efficient way to do this on Linux
459 * but we don't use this for anything speed critical and this
462 for (i = 0; i < count; i++)
463 ahd_outb(ahd, port, *array++);
467 ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
472 * There is probably a more efficient way to do this on Linux
473 * but we don't use this for anything speed critical and this
476 for (i = 0; i < count; i++)
477 *array++ = ahd_inb(ahd, port);
480 /******************************* PCI Routines *********************************/
482 ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width)
489 pci_read_config_byte(pci, reg, &retval);
495 pci_read_config_word(pci, reg, &retval);
501 pci_read_config_dword(pci, reg, &retval);
505 panic("ahd_pci_read_config: Read size too big");
512 ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width)
516 pci_write_config_byte(pci, reg, value);
519 pci_write_config_word(pci, reg, value);
522 pci_write_config_dword(pci, reg, value);
525 panic("ahd_pci_write_config: Write size too big");
530 /****************************** Inlines ***************************************/
531 static void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
534 ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
536 struct scsi_cmnd *cmd;
540 ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE);
545 /******************************** Macros **************************************/
546 static inline unsigned int ahd_build_scsiid(struct ahd_softc *ahd,
547 struct scsi_device *sdev)
549 return ((sdev_id(sdev) << TID_SHIFT) & TID) | (ahd)->our_id;
553 * Return a string describing the driver.
556 ahd_linux_info(struct Scsi_Host *host)
558 static char buffer[512];
561 struct ahd_softc *ahd;
564 ahd = *(struct ahd_softc **)host->hostdata;
565 memset(bp, 0, sizeof(buffer));
566 strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev " AIC79XX_DRIVER_VERSION "\n"
568 strcat(bp, ahd->description);
571 ahd_controller_info(ahd, ahd_info);
572 strcat(bp, ahd_info);
578 * Queue an SCB to the controller.
580 static int ahd_linux_queue_lck(struct scsi_cmnd *cmd)
582 struct ahd_softc *ahd;
583 struct ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
584 int rtn = SCSI_MLQUEUE_HOST_BUSY;
586 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
588 cmd->result = CAM_REQ_INPROG << 16;
589 rtn = ahd_linux_run_command(ahd, dev, cmd);
594 static DEF_SCSI_QCMD(ahd_linux_queue)
596 static struct scsi_target **
597 ahd_linux_target_in_softc(struct scsi_target *starget)
599 struct ahd_softc *ahd =
600 *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
601 unsigned int target_offset;
603 target_offset = starget->id;
604 if (starget->channel != 0)
607 return &ahd->platform_data->starget[target_offset];
611 ahd_linux_target_alloc(struct scsi_target *starget)
613 struct ahd_softc *ahd =
614 *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
615 struct seeprom_config *sc = ahd->seep_config;
617 struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
618 struct ahd_devinfo devinfo;
619 struct ahd_initiator_tinfo *tinfo;
620 struct ahd_tmode_tstate *tstate;
621 char channel = starget->channel + 'A';
623 ahd_lock(ahd, &flags);
625 BUG_ON(*ahd_targp != NULL);
627 *ahd_targp = starget;
630 int flags = sc->device_flags[starget->id];
632 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
633 starget->id, &tstate);
635 if ((flags & CFPACKETIZED) == 0) {
636 /* don't negotiate packetized (IU) transfers */
637 spi_max_iu(starget) = 0;
639 if ((ahd->features & AHD_RTI) == 0)
640 spi_rti(starget) = 0;
643 if ((flags & CFQAS) == 0)
644 spi_max_qas(starget) = 0;
646 /* Transinfo values have been set to BIOS settings */
647 spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
648 spi_min_period(starget) = tinfo->user.period;
649 spi_max_offset(starget) = tinfo->user.offset;
652 tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
653 starget->id, &tstate);
654 ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
655 CAM_LUN_WILDCARD, channel,
657 ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,
658 AHD_TRANS_GOAL, /*paused*/FALSE);
659 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
660 AHD_TRANS_GOAL, /*paused*/FALSE);
661 ahd_unlock(ahd, &flags);
667 ahd_linux_target_destroy(struct scsi_target *starget)
669 struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
675 ahd_linux_slave_alloc(struct scsi_device *sdev)
677 struct ahd_softc *ahd =
678 *((struct ahd_softc **)sdev->host->hostdata);
679 struct ahd_linux_device *dev;
682 printk("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
684 dev = scsi_transport_device_data(sdev);
685 memset(dev, 0, sizeof(*dev));
688 * We start out life using untagged
689 * transactions of which we allow one.
694 * Set maxtags to 0. This will be changed if we
695 * later determine that we are dealing with
696 * a tagged queuing capable device.
704 ahd_linux_slave_configure(struct scsi_device *sdev)
707 sdev_printk(KERN_INFO, sdev, "Slave Configure\n");
709 ahd_linux_device_queue_depth(sdev);
711 /* Initial Domain Validation */
712 if (!spi_initial_dv(sdev->sdev_target))
718 #if defined(__i386__)
720 * Return the disk geometry for the given SCSI device.
723 ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
724 sector_t capacity, int geom[])
730 struct ahd_softc *ahd;
732 ahd = *((struct ahd_softc **)sdev->host->hostdata);
734 if (scsi_partsize(bdev, capacity, geom))
739 cylinders = aic_sector_div(capacity, heads, sectors);
741 if (aic79xx_extended != 0)
744 extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0;
745 if (extended && cylinders >= 1024) {
748 cylinders = aic_sector_div(capacity, heads, sectors);
758 * Abort the current SCSI command(s).
761 ahd_linux_abort(struct scsi_cmnd *cmd)
763 return ahd_linux_queue_abort_cmd(cmd);
767 * Attempt to send a target reset message to the device that timed out.
770 ahd_linux_dev_reset(struct scsi_cmnd *cmd)
772 struct ahd_softc *ahd;
773 struct ahd_linux_device *dev;
774 struct scb *reset_scb;
776 int retval = SUCCESS;
777 struct ahd_initiator_tinfo *tinfo;
778 struct ahd_tmode_tstate *tstate;
780 DECLARE_COMPLETION_ONSTACK(done);
784 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
786 scmd_printk(KERN_INFO, cmd,
787 "Attempting to queue a TARGET RESET message:");
790 for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
791 printk(" 0x%x", cmd->cmnd[cdb_byte]);
795 * Determine if we currently own this command.
797 dev = scsi_transport_device_data(cmd->device);
801 * No target device for this command exists,
802 * so we must not still own the command.
804 scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
809 * Generate us a new SCB
811 reset_scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX);
813 scmd_printk(KERN_INFO, cmd, "No SCB available\n");
817 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
818 cmd->device->id, &tstate);
819 reset_scb->io_ctx = NULL;
820 reset_scb->platform_data->dev = dev;
821 reset_scb->sg_count = 0;
822 ahd_set_residual(reset_scb, 0);
823 ahd_set_sense_residual(reset_scb, 0);
824 reset_scb->platform_data->xfer_len = 0;
825 reset_scb->hscb->control = 0;
826 reset_scb->hscb->scsiid = ahd_build_scsiid(ahd, cmd->device);
827 reset_scb->hscb->lun = cmd->device->lun;
828 reset_scb->hscb->cdb_len = 0;
829 reset_scb->hscb->task_management = SIU_TASKMGMT_LUN_RESET;
830 reset_scb->flags |= SCB_DEVICE_RESET|SCB_RECOVERY_SCB|SCB_ACTIVE;
831 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
832 reset_scb->flags |= SCB_PACKETIZED;
834 reset_scb->hscb->control |= MK_MESSAGE;
838 dev->commands_issued++;
840 ahd_lock(ahd, &flags);
842 LIST_INSERT_HEAD(&ahd->pending_scbs, reset_scb, pending_links);
843 ahd_queue_scb(ahd, reset_scb);
845 ahd->platform_data->eh_done = &done;
846 ahd_unlock(ahd, &flags);
848 printk("%s: Device reset code sleeping\n", ahd_name(ahd));
849 if (!wait_for_completion_timeout(&done, 5 * HZ)) {
850 ahd_lock(ahd, &flags);
851 ahd->platform_data->eh_done = NULL;
852 ahd_unlock(ahd, &flags);
853 printk("%s: Device reset timer expired (active %d)\n",
854 ahd_name(ahd), dev->active);
857 printk("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval);
863 * Reset the SCSI bus.
866 ahd_linux_bus_reset(struct scsi_cmnd *cmd)
868 struct ahd_softc *ahd;
872 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
874 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
875 printk("%s: Bus reset called for cmd %p\n",
878 ahd_lock(ahd, &flags);
880 found = ahd_reset_channel(ahd, scmd_channel(cmd) + 'A',
881 /*initiate reset*/TRUE);
882 ahd_unlock(ahd, &flags);
885 printk("%s: SCSI bus reset delivered. "
886 "%d SCBs aborted.\n", ahd_name(ahd), found);
891 struct scsi_host_template aic79xx_driver_template = {
892 .module = THIS_MODULE,
894 .proc_name = "aic79xx",
895 .show_info = ahd_linux_show_info,
896 .write_info = ahd_proc_write_seeprom,
897 .info = ahd_linux_info,
898 .queuecommand = ahd_linux_queue,
899 .eh_abort_handler = ahd_linux_abort,
900 .eh_device_reset_handler = ahd_linux_dev_reset,
901 .eh_bus_reset_handler = ahd_linux_bus_reset,
902 #if defined(__i386__)
903 .bios_param = ahd_linux_biosparam,
905 .can_queue = AHD_MAX_QUEUE,
909 .slave_alloc = ahd_linux_slave_alloc,
910 .slave_configure = ahd_linux_slave_configure,
911 .target_alloc = ahd_linux_target_alloc,
912 .target_destroy = ahd_linux_target_destroy,
915 /******************************** Bus DMA *************************************/
917 ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent,
918 bus_size_t alignment, bus_size_t boundary,
919 dma_addr_t lowaddr, dma_addr_t highaddr,
920 bus_dma_filter_t *filter, void *filterarg,
921 bus_size_t maxsize, int nsegments,
922 bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag)
926 dmat = kmalloc(sizeof(*dmat), GFP_ATOMIC);
931 * Linux is very simplistic about DMA memory. For now don't
932 * maintain all specification information. Once Linux supplies
933 * better facilities for doing these operations, or the
934 * needs of this particular driver change, we might need to do
937 dmat->alignment = alignment;
938 dmat->boundary = boundary;
939 dmat->maxsize = maxsize;
945 ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat)
951 ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr,
952 int flags, bus_dmamap_t *mapp)
954 *vaddr = dma_alloc_coherent(&ahd->dev_softc->dev, dmat->maxsize, mapp,
962 ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat,
963 void* vaddr, bus_dmamap_t map)
965 dma_free_coherent(&ahd->dev_softc->dev, dmat->maxsize, vaddr, map);
969 ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map,
970 void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb,
971 void *cb_arg, int flags)
974 * Assume for now that this will only be used during
975 * initialization and not for per-transaction buffer mapping.
977 bus_dma_segment_t stack_sg;
979 stack_sg.ds_addr = map;
980 stack_sg.ds_len = dmat->maxsize;
981 cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
986 ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
991 ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
997 /********************* Platform Dependent Functions ***************************/
999 ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value)
1003 && (instance < ARRAY_SIZE(aic79xx_iocell_info))) {
1004 uint8_t *iocell_info;
1006 iocell_info = (uint8_t*)&aic79xx_iocell_info[instance];
1007 iocell_info[index] = value & 0xFFFF;
1009 printk("iocell[%d:%ld] = %d\n", instance, index, value);
1014 ahd_linux_setup_tag_info_global(char *p)
1018 tags = simple_strtoul(p + 1, NULL, 0) & 0xff;
1019 printk("Setting Global Tags= %d\n", tags);
1021 for (i = 0; i < ARRAY_SIZE(aic79xx_tag_info); i++) {
1022 for (j = 0; j < AHD_NUM_TARGETS; j++) {
1023 aic79xx_tag_info[i].tag_commands[j] = tags;
1029 ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value)
1032 if ((instance >= 0) && (targ >= 0)
1033 && (instance < ARRAY_SIZE(aic79xx_tag_info))
1034 && (targ < AHD_NUM_TARGETS)) {
1035 aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF;
1037 printk("tag_info[%d:%d] = %d\n", instance, targ, value);
1042 ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
1043 void (*callback)(u_long, int, int, int32_t),
1044 u_long callback_arg)
1052 char tok_list[] = {'.', ',', '{', '}', '\0'};
1054 /* All options use a ':' name/arg separator */
1055 if (*opt_arg != ':')
1062 * Restore separator that may be in
1063 * the middle of our option argument.
1065 tok_end = strchr(opt_arg, '\0');
1071 if (instance == -1) {
1078 printk("Malformed Option %s\n",
1088 else if (instance != -1)
1098 else if (instance >= 0)
1107 for (i = 0; tok_list[i]; i++) {
1108 tok_end2 = strchr(opt_arg, tok_list[i]);
1109 if ((tok_end2) && (tok_end2 < tok_end))
1112 callback(callback_arg, instance, targ,
1113 simple_strtol(opt_arg, NULL, 0));
1122 * Handle Linux boot parameters. This routine allows for assigning a value
1123 * to a parameter with a ':' between the parameter and the value.
1124 * ie. aic79xx=stpwlev:1,extended
1127 aic79xx_setup(char *s)
1133 static const struct {
1137 { "extended", &aic79xx_extended },
1138 { "no_reset", &aic79xx_no_reset },
1139 { "verbose", &aic79xx_verbose },
1140 { "allow_memio", &aic79xx_allow_memio},
1142 { "debug", &ahd_debug },
1144 { "periodic_otag", &aic79xx_periodic_otag },
1145 { "pci_parity", &aic79xx_pci_parity },
1146 { "seltime", &aic79xx_seltime },
1147 { "tag_info", NULL },
1148 { "global_tag_depth", NULL},
1149 { "slewrate", NULL },
1150 { "precomp", NULL },
1151 { "amplitude", NULL },
1152 { "slowcrc", &aic79xx_slowcrc },
1155 end = strchr(s, '\0');
1158 * XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE
1159 * will never be 0 in this case.
1163 while ((p = strsep(&s, ",.")) != NULL) {
1166 for (i = 0; i < ARRAY_SIZE(options); i++) {
1168 n = strlen(options[i].name);
1169 if (strncmp(options[i].name, p, n) == 0)
1172 if (i == ARRAY_SIZE(options))
1175 if (strncmp(p, "global_tag_depth", n) == 0) {
1176 ahd_linux_setup_tag_info_global(p + n);
1177 } else if (strncmp(p, "tag_info", n) == 0) {
1178 s = ahd_parse_brace_option("tag_info", p + n, end,
1179 2, ahd_linux_setup_tag_info, 0);
1180 } else if (strncmp(p, "slewrate", n) == 0) {
1181 s = ahd_parse_brace_option("slewrate",
1182 p + n, end, 1, ahd_linux_setup_iocell_info,
1183 AIC79XX_SLEWRATE_INDEX);
1184 } else if (strncmp(p, "precomp", n) == 0) {
1185 s = ahd_parse_brace_option("precomp",
1186 p + n, end, 1, ahd_linux_setup_iocell_info,
1187 AIC79XX_PRECOMP_INDEX);
1188 } else if (strncmp(p, "amplitude", n) == 0) {
1189 s = ahd_parse_brace_option("amplitude",
1190 p + n, end, 1, ahd_linux_setup_iocell_info,
1191 AIC79XX_AMPLITUDE_INDEX);
1192 } else if (p[n] == ':') {
1193 *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
1194 } else if (!strncmp(p, "verbose", n)) {
1195 *(options[i].flag) = 1;
1197 *(options[i].flag) ^= 0xFFFFFFFF;
1203 __setup("aic79xx=", aic79xx_setup);
1205 uint32_t aic79xx_verbose;
1208 ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template)
1211 struct Scsi_Host *host;
1216 template->name = ahd->description;
1217 host = scsi_host_alloc(template, sizeof(struct ahd_softc *));
1221 *((struct ahd_softc **)host->hostdata) = ahd;
1222 ahd->platform_data->host = host;
1223 host->can_queue = AHD_MAX_QUEUE;
1224 host->cmd_per_lun = 2;
1225 host->sg_tablesize = AHD_NSEG;
1226 host->this_id = ahd->our_id;
1227 host->irq = ahd->platform_data->irq;
1228 host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
1229 host->max_lun = AHD_NUM_LUNS;
1230 host->max_channel = 0;
1231 host->sg_tablesize = AHD_NSEG;
1233 ahd_set_unit(ahd, ahd_linux_unit++);
1234 ahd_unlock(ahd, &s);
1235 sprintf(buf, "scsi%d", host->host_no);
1236 new_name = kmalloc(strlen(buf) + 1, GFP_ATOMIC);
1237 if (new_name != NULL) {
1238 strcpy(new_name, buf);
1239 ahd_set_name(ahd, new_name);
1241 host->unique_id = ahd->unit;
1242 ahd_linux_initialize_scsi_bus(ahd);
1243 ahd_intr_enable(ahd, TRUE);
1245 host->transportt = ahd_linux_transport_template;
1247 retval = scsi_add_host(host, &ahd->dev_softc->dev);
1249 printk(KERN_WARNING "aic79xx: scsi_add_host failed\n");
1250 scsi_host_put(host);
1254 scsi_scan_host(host);
1259 * Place the SCSI bus into a known state by either resetting it,
1260 * or forcing transfer negotiations on the next command to any
1264 ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd)
1273 if (aic79xx_no_reset != 0)
1274 ahd->flags &= ~AHD_RESET_BUS_A;
1276 if ((ahd->flags & AHD_RESET_BUS_A) != 0)
1277 ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE);
1279 numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
1284 * Force negotiation to async for all targets that
1285 * will not see an initial bus reset.
1287 for (; target_id < numtarg; target_id++) {
1288 struct ahd_devinfo devinfo;
1289 struct ahd_initiator_tinfo *tinfo;
1290 struct ahd_tmode_tstate *tstate;
1292 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1293 target_id, &tstate);
1294 ahd_compile_devinfo(&devinfo, ahd->our_id, target_id,
1295 CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR);
1296 ahd_update_neg_request(ahd, &devinfo, tstate,
1297 tinfo, AHD_NEG_ALWAYS);
1299 ahd_unlock(ahd, &s);
1300 /* Give the bus some time to recover */
1301 if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
1302 ahd_freeze_simq(ahd);
1303 msleep(AIC79XX_RESET_DELAY);
1304 ahd_release_simq(ahd);
1309 ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
1311 ahd->platform_data =
1312 kzalloc(sizeof(struct ahd_platform_data), GFP_ATOMIC);
1313 if (ahd->platform_data == NULL)
1315 ahd->platform_data->irq = AHD_LINUX_NOIRQ;
1317 ahd->seltime = (aic79xx_seltime & 0x3) << 4;
1322 ahd_platform_free(struct ahd_softc *ahd)
1324 struct scsi_target *starget;
1327 if (ahd->platform_data != NULL) {
1328 /* destroy all of the device and target objects */
1329 for (i = 0; i < AHD_NUM_TARGETS; i++) {
1330 starget = ahd->platform_data->starget[i];
1331 if (starget != NULL) {
1332 ahd->platform_data->starget[i] = NULL;
1336 if (ahd->platform_data->irq != AHD_LINUX_NOIRQ)
1337 free_irq(ahd->platform_data->irq, ahd);
1338 if (ahd->tags[0] == BUS_SPACE_PIO
1339 && ahd->bshs[0].ioport != 0)
1340 release_region(ahd->bshs[0].ioport, 256);
1341 if (ahd->tags[1] == BUS_SPACE_PIO
1342 && ahd->bshs[1].ioport != 0)
1343 release_region(ahd->bshs[1].ioport, 256);
1344 if (ahd->tags[0] == BUS_SPACE_MEMIO
1345 && ahd->bshs[0].maddr != NULL) {
1346 iounmap(ahd->bshs[0].maddr);
1347 release_mem_region(ahd->platform_data->mem_busaddr,
1350 if (ahd->platform_data->host)
1351 scsi_host_put(ahd->platform_data->host);
1353 kfree(ahd->platform_data);
1358 ahd_platform_init(struct ahd_softc *ahd)
1361 * Lookup and commit any modified IO Cell options.
1363 if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
1364 const struct ahd_linux_iocell_opts *iocell_opts;
1366 iocell_opts = &aic79xx_iocell_info[ahd->unit];
1367 if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
1368 AHD_SET_PRECOMP(ahd, iocell_opts->precomp);
1369 if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE)
1370 AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate);
1371 if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE)
1372 AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude);
1378 ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
1380 ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1381 SCB_GET_CHANNEL(ahd, scb),
1382 SCB_GET_LUN(scb), SCB_LIST_NULL,
1383 ROLE_UNKNOWN, CAM_REQUEUE_REQ);
1387 ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
1388 struct ahd_devinfo *devinfo, ahd_queue_alg alg)
1390 struct ahd_linux_device *dev;
1397 dev = scsi_transport_device_data(sdev);
1401 was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED);
1404 case AHD_QUEUE_NONE:
1407 case AHD_QUEUE_BASIC:
1408 now_queuing = AHD_DEV_Q_BASIC;
1410 case AHD_QUEUE_TAGGED:
1411 now_queuing = AHD_DEV_Q_TAGGED;
1414 if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0
1415 && (was_queuing != now_queuing)
1416 && (dev->active != 0)) {
1417 dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY;
1421 dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG);
1425 usertags = ahd_linux_user_tagdepth(ahd, devinfo);
1428 * Start out aggressively and allow our
1429 * dynamic queue depth algorithm to take
1432 dev->maxtags = usertags;
1433 dev->openings = dev->maxtags - dev->active;
1435 if (dev->maxtags == 0) {
1437 * Queueing is disabled by the user.
1440 } else if (alg == AHD_QUEUE_TAGGED) {
1441 dev->flags |= AHD_DEV_Q_TAGGED;
1442 if (aic79xx_periodic_otag != 0)
1443 dev->flags |= AHD_DEV_PERIODIC_OTAG;
1445 dev->flags |= AHD_DEV_Q_BASIC;
1447 /* We can only have one opening. */
1449 dev->openings = 1 - dev->active;
1452 switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
1453 case AHD_DEV_Q_BASIC:
1454 case AHD_DEV_Q_TAGGED:
1455 scsi_change_queue_depth(sdev,
1456 dev->openings + dev->active);
1460 * We allow the OS to queue 2 untagged transactions to
1461 * us at any time even though we can only execute them
1462 * serially on the controller/device. This should
1463 * remove some latency.
1465 scsi_change_queue_depth(sdev, 1);
1471 ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel,
1472 int lun, u_int tag, role_t role, uint32_t status)
1478 ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
1480 static int warned_user;
1484 if ((ahd->user_discenable & devinfo->target_mask) != 0) {
1485 if (ahd->unit >= ARRAY_SIZE(aic79xx_tag_info)) {
1487 if (warned_user == 0) {
1489 "aic79xx: WARNING: Insufficient tag_info instances\n"
1490 "aic79xx: for installed controllers. Using defaults\n"
1491 "aic79xx: Please update the aic79xx_tag_info array in\n"
1492 "aic79xx: the aic79xx_osm.c source file.\n");
1495 tags = AHD_MAX_QUEUE;
1497 adapter_tag_info_t *tag_info;
1499 tag_info = &aic79xx_tag_info[ahd->unit];
1500 tags = tag_info->tag_commands[devinfo->target_offset];
1501 if (tags > AHD_MAX_QUEUE)
1502 tags = AHD_MAX_QUEUE;
1509 * Determines the queue depth for a given device.
1512 ahd_linux_device_queue_depth(struct scsi_device *sdev)
1514 struct ahd_devinfo devinfo;
1516 struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata);
1518 ahd_compile_devinfo(&devinfo,
1520 sdev->sdev_target->id, sdev->lun,
1521 sdev->sdev_target->channel == 0 ? 'A' : 'B',
1523 tags = ahd_linux_user_tagdepth(ahd, &devinfo);
1524 if (tags != 0 && sdev->tagged_supported != 0) {
1526 ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED);
1527 ahd_send_async(ahd, devinfo.channel, devinfo.target,
1528 devinfo.lun, AC_TRANSFER_NEG);
1529 ahd_print_devinfo(ahd, &devinfo);
1530 printk("Tagged Queuing enabled. Depth %d\n", tags);
1532 ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE);
1533 ahd_send_async(ahd, devinfo.channel, devinfo.target,
1534 devinfo.lun, AC_TRANSFER_NEG);
1539 ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev,
1540 struct scsi_cmnd *cmd)
1543 struct hardware_scb *hscb;
1544 struct ahd_initiator_tinfo *tinfo;
1545 struct ahd_tmode_tstate *tstate;
1548 unsigned long flags;
1551 nseg = scsi_dma_map(cmd);
1553 return SCSI_MLQUEUE_HOST_BUSY;
1555 ahd_lock(ahd, &flags);
1558 * Get an scb to use.
1560 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1561 cmd->device->id, &tstate);
1562 if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0
1563 || (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
1564 col_idx = AHD_NEVER_COL_IDX;
1566 col_idx = AHD_BUILD_COL_IDX(cmd->device->id,
1569 if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
1570 ahd->flags |= AHD_RESOURCE_SHORTAGE;
1571 ahd_unlock(ahd, &flags);
1572 scsi_dma_unmap(cmd);
1573 return SCSI_MLQUEUE_HOST_BUSY;
1577 scb->platform_data->dev = dev;
1579 cmd->host_scribble = (char *)scb;
1582 * Fill out basics of the HSCB.
1585 hscb->scsiid = ahd_build_scsiid(ahd, cmd->device);
1586 hscb->lun = cmd->device->lun;
1587 scb->hscb->task_management = 0;
1588 mask = SCB_GET_TARGET_MASK(ahd, scb);
1590 if ((ahd->user_discenable & mask) != 0)
1591 hscb->control |= DISCENB;
1593 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0)
1594 scb->flags |= SCB_PACKETIZED;
1596 if ((tstate->auto_negotiate & mask) != 0) {
1597 scb->flags |= SCB_AUTO_NEGOTIATE;
1598 scb->hscb->control |= MK_MESSAGE;
1601 if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
1602 if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
1603 && (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
1604 hscb->control |= ORDERED_QUEUE_TAG;
1605 dev->commands_since_idle_or_otag = 0;
1607 hscb->control |= SIMPLE_QUEUE_TAG;
1611 hscb->cdb_len = cmd->cmd_len;
1612 memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len);
1614 scb->platform_data->xfer_len = 0;
1615 ahd_set_residual(scb, 0);
1616 ahd_set_sense_residual(scb, 0);
1620 void *sg = scb->sg_list;
1621 struct scatterlist *cur_seg;
1624 scb->platform_data->xfer_len = 0;
1626 scsi_for_each_sg(cmd, cur_seg, nseg, i) {
1630 addr = sg_dma_address(cur_seg);
1631 len = sg_dma_len(cur_seg);
1632 scb->platform_data->xfer_len += len;
1633 sg = ahd_sg_setup(ahd, scb, sg, addr, len,
1638 LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
1641 dev->commands_issued++;
1643 if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0)
1644 dev->commands_since_idle_or_otag++;
1645 scb->flags |= SCB_ACTIVE;
1646 ahd_queue_scb(ahd, scb);
1648 ahd_unlock(ahd, &flags);
1654 * SCSI controller interrupt handler.
1657 ahd_linux_isr(int irq, void *dev_id)
1659 struct ahd_softc *ahd;
1663 ahd = (struct ahd_softc *) dev_id;
1664 ahd_lock(ahd, &flags);
1665 ours = ahd_intr(ahd);
1666 ahd_unlock(ahd, &flags);
1667 return IRQ_RETVAL(ours);
1671 ahd_send_async(struct ahd_softc *ahd, char channel,
1672 u_int target, u_int lun, ac_code code)
1675 case AC_TRANSFER_NEG:
1677 struct scsi_target *starget;
1678 struct ahd_initiator_tinfo *tinfo;
1679 struct ahd_tmode_tstate *tstate;
1680 unsigned int target_ppr_options;
1682 BUG_ON(target == CAM_TARGET_WILDCARD);
1684 tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
1688 * Don't bother reporting results while
1689 * negotiations are still pending.
1691 if (tinfo->curr.period != tinfo->goal.period
1692 || tinfo->curr.width != tinfo->goal.width
1693 || tinfo->curr.offset != tinfo->goal.offset
1694 || tinfo->curr.ppr_options != tinfo->goal.ppr_options)
1695 if (bootverbose == 0)
1699 * Don't bother reporting results that
1700 * are identical to those last reported.
1702 starget = ahd->platform_data->starget[target];
1703 if (starget == NULL)
1706 target_ppr_options =
1707 (spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0)
1708 + (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0)
1709 + (spi_iu(starget) ? MSG_EXT_PPR_IU_REQ : 0)
1710 + (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0)
1711 + (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0)
1712 + (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0)
1713 + (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0)
1714 + (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0);
1716 if (tinfo->curr.period == spi_period(starget)
1717 && tinfo->curr.width == spi_width(starget)
1718 && tinfo->curr.offset == spi_offset(starget)
1719 && tinfo->curr.ppr_options == target_ppr_options)
1720 if (bootverbose == 0)
1723 spi_period(starget) = tinfo->curr.period;
1724 spi_width(starget) = tinfo->curr.width;
1725 spi_offset(starget) = tinfo->curr.offset;
1726 spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
1727 spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
1728 spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
1729 spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0;
1730 spi_pcomp_en(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0;
1731 spi_rti(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RTI ? 1 : 0;
1732 spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0;
1733 spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0;
1734 spi_display_xfer_agreement(starget);
1739 WARN_ON(lun != CAM_LUN_WILDCARD);
1740 scsi_report_device_reset(ahd->platform_data->host,
1741 channel - 'A', target);
1745 if (ahd->platform_data->host != NULL) {
1746 scsi_report_bus_reset(ahd->platform_data->host,
1751 panic("ahd_send_async: Unexpected async event");
1756 * Calls the higher level scsi done function and frees the scb.
1759 ahd_done(struct ahd_softc *ahd, struct scb *scb)
1761 struct scsi_cmnd *cmd;
1762 struct ahd_linux_device *dev;
1764 if ((scb->flags & SCB_ACTIVE) == 0) {
1765 printk("SCB %d done'd twice\n", SCB_GET_TAG(scb));
1766 ahd_dump_card_state(ahd);
1767 panic("Stopping for safety");
1769 LIST_REMOVE(scb, pending_links);
1771 dev = scb->platform_data->dev;
1775 if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) {
1776 cmd->result &= ~(CAM_DEV_QFRZN << 16);
1779 } else if (scb->flags & SCB_DEVICE_RESET) {
1780 if (ahd->platform_data->eh_done)
1781 complete(ahd->platform_data->eh_done);
1782 ahd_free_scb(ahd, scb);
1785 ahd_linux_unmap_scb(ahd, scb);
1788 * Guard against stale sense data.
1789 * The Linux mid-layer assumes that sense
1790 * was retrieved anytime the first byte of
1791 * the sense buffer looks "sane".
1793 cmd->sense_buffer[0] = 0;
1794 if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) {
1795 #ifdef AHD_REPORT_UNDERFLOWS
1796 uint32_t amount_xferred;
1799 ahd_get_transfer_length(scb) - ahd_get_residual(scb);
1801 if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) {
1803 if ((ahd_debug & AHD_SHOW_MISC) != 0) {
1804 ahd_print_path(ahd, scb);
1805 printk("Set CAM_UNCOR_PARITY\n");
1808 ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
1809 #ifdef AHD_REPORT_UNDERFLOWS
1811 * This code is disabled by default as some
1812 * clients of the SCSI system do not properly
1813 * initialize the underflow parameter. This
1814 * results in spurious termination of commands
1815 * that complete as expected (e.g. underflow is
1816 * allowed as command can return variable amounts
1819 } else if (amount_xferred < scb->io_ctx->underflow) {
1822 ahd_print_path(ahd, scb);
1824 for (i = 0; i < scb->io_ctx->cmd_len; i++)
1825 printk(" 0x%x", scb->io_ctx->cmnd[i]);
1827 ahd_print_path(ahd, scb);
1828 printk("Saw underflow (%ld of %ld bytes). "
1829 "Treated as error\n",
1830 ahd_get_residual(scb),
1831 ahd_get_transfer_length(scb));
1832 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1835 ahd_set_transaction_status(scb, CAM_REQ_CMP);
1838 ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) {
1839 ahd_linux_handle_scsi_status(ahd, cmd->device, scb);
1842 if (dev->openings == 1
1843 && ahd_get_transaction_status(scb) == CAM_REQ_CMP
1844 && ahd_get_scsi_status(scb) != SAM_STAT_TASK_SET_FULL)
1845 dev->tag_success_count++;
1847 * Some devices deal with temporary internal resource
1848 * shortages by returning queue full. When the queue
1849 * full occurrs, we throttle back. Slowly try to get
1850 * back to our previous queue depth.
1852 if ((dev->openings + dev->active) < dev->maxtags
1853 && dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) {
1854 dev->tag_success_count = 0;
1858 if (dev->active == 0)
1859 dev->commands_since_idle_or_otag = 0;
1861 if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
1862 printk("Recovery SCB completes\n");
1863 if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
1864 || ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
1865 ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
1867 if (ahd->platform_data->eh_done)
1868 complete(ahd->platform_data->eh_done);
1871 ahd_free_scb(ahd, scb);
1873 ahd_linux_queue_cmd_complete(ahd, cmd);
1877 ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
1878 struct scsi_device *sdev, struct scb *scb)
1880 struct ahd_devinfo devinfo;
1881 struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
1883 ahd_compile_devinfo(&devinfo,
1885 sdev->sdev_target->id, sdev->lun,
1886 sdev->sdev_target->channel == 0 ? 'A' : 'B',
1890 * We don't currently trust the mid-layer to
1891 * properly deal with queue full or busy. So,
1892 * when one occurs, we tell the mid-layer to
1893 * unconditionally requeue the command to us
1894 * so that we can retry it ourselves. We also
1895 * implement our own throttling mechanism so
1896 * we don't clobber the device with too many
1899 switch (ahd_get_scsi_status(scb)) {
1902 case SAM_STAT_CHECK_CONDITION:
1903 case SAM_STAT_COMMAND_TERMINATED:
1905 struct scsi_cmnd *cmd;
1908 * Copy sense information to the OS's cmd
1909 * structure if it is available.
1912 if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) {
1913 struct scsi_status_iu_header *siu;
1917 if (scb->flags & SCB_SENSE) {
1918 sense_size = min(sizeof(struct scsi_sense_data)
1919 - ahd_get_sense_residual(scb),
1920 (u_long)SCSI_SENSE_BUFFERSIZE);
1924 * Copy only the sense data into the provided
1927 siu = (struct scsi_status_iu_header *)
1929 sense_size = min_t(size_t,
1930 scsi_4btoul(siu->sense_length),
1931 SCSI_SENSE_BUFFERSIZE);
1932 sense_offset = SIU_SENSE_OFFSET(siu);
1935 memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1936 memcpy(cmd->sense_buffer,
1937 ahd_get_sense_buf(ahd, scb)
1938 + sense_offset, sense_size);
1939 set_status_byte(cmd, SAM_STAT_CHECK_CONDITION);
1942 if (ahd_debug & AHD_SHOW_SENSE) {
1945 printk("Copied %d bytes of sense data at %d:",
1946 sense_size, sense_offset);
1947 for (i = 0; i < sense_size; i++) {
1950 printk("0x%x ", cmd->sense_buffer[i]);
1958 case SAM_STAT_TASK_SET_FULL:
1960 * By the time the core driver has returned this
1961 * command, all other commands that were queued
1962 * to us but not the device have been returned.
1963 * This ensures that dev->active is equal to
1964 * the number of commands actually queued to
1967 dev->tag_success_count = 0;
1968 if (dev->active != 0) {
1970 * Drop our opening count to the number
1971 * of commands currently outstanding.
1975 if ((ahd_debug & AHD_SHOW_QFULL) != 0) {
1976 ahd_print_path(ahd, scb);
1977 printk("Dropping tag count to %d\n",
1981 if (dev->active == dev->tags_on_last_queuefull) {
1983 dev->last_queuefull_same_count++;
1985 * If we repeatedly see a queue full
1986 * at the same queue depth, this
1987 * device has a fixed number of tag
1988 * slots. Lock in this tag depth
1989 * so we stop seeing queue fulls from
1992 if (dev->last_queuefull_same_count
1993 == AHD_LOCK_TAGS_COUNT) {
1994 dev->maxtags = dev->active;
1995 ahd_print_path(ahd, scb);
1996 printk("Locking max tag count at %d\n",
2000 dev->tags_on_last_queuefull = dev->active;
2001 dev->last_queuefull_same_count = 0;
2003 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
2004 ahd_set_scsi_status(scb, SAM_STAT_GOOD);
2005 ahd_platform_set_tags(ahd, sdev, &devinfo,
2006 (dev->flags & AHD_DEV_Q_BASIC)
2007 ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
2011 * Drop down to a single opening, and treat this
2012 * as if the target returned BUSY SCSI status.
2015 ahd_platform_set_tags(ahd, sdev, &devinfo,
2016 (dev->flags & AHD_DEV_Q_BASIC)
2017 ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
2018 ahd_set_scsi_status(scb, SAM_STAT_BUSY);
2023 ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
2026 int new_status = DID_OK;
2027 int do_fallback = 0;
2029 struct scsi_sense_data *sense;
2032 * Map CAM error codes into Linux Error codes. We
2033 * avoid the conversion so that the DV code has the
2034 * full error information available when making
2035 * state change decisions.
2038 status = ahd_cmd_get_transaction_status(cmd);
2040 case CAM_REQ_INPROG:
2042 new_status = DID_OK;
2044 case CAM_AUTOSENSE_FAIL:
2045 new_status = DID_ERROR;
2047 case CAM_SCSI_STATUS_ERROR:
2048 scsi_status = ahd_cmd_get_scsi_status(cmd);
2050 switch(scsi_status) {
2051 case SAM_STAT_COMMAND_TERMINATED:
2052 case SAM_STAT_CHECK_CONDITION:
2053 sense = (struct scsi_sense_data *)
2055 if (sense->extra_len >= 5 &&
2056 (sense->add_sense_code == 0x47
2057 || sense->add_sense_code == 0x48))
2064 case CAM_REQ_ABORTED:
2065 new_status = DID_ABORT;
2068 new_status = DID_BUS_BUSY;
2070 case CAM_REQ_INVALID:
2071 case CAM_PATH_INVALID:
2072 new_status = DID_BAD_TARGET;
2074 case CAM_SEL_TIMEOUT:
2075 new_status = DID_NO_CONNECT;
2077 case CAM_SCSI_BUS_RESET:
2079 new_status = DID_RESET;
2081 case CAM_UNCOR_PARITY:
2082 new_status = DID_PARITY;
2085 case CAM_CMD_TIMEOUT:
2086 new_status = DID_TIME_OUT;
2089 case CAM_REQ_CMP_ERR:
2090 case CAM_UNEXP_BUSFREE:
2091 case CAM_DATA_RUN_ERR:
2092 new_status = DID_ERROR;
2097 case CAM_SEQUENCE_FAIL:
2098 case CAM_CCB_LEN_ERR:
2099 case CAM_PROVIDE_FAIL:
2100 case CAM_REQ_TERMIO:
2101 case CAM_UNREC_HBA_ERROR:
2102 case CAM_REQ_TOO_BIG:
2103 new_status = DID_ERROR;
2105 case CAM_REQUEUE_REQ:
2106 new_status = DID_REQUEUE;
2109 /* We should never get here */
2110 new_status = DID_ERROR;
2115 printk("%s: device overrun (status %x) on %d:%d:%d\n",
2116 ahd_name(ahd), status, cmd->device->channel,
2117 cmd->device->id, (u8)cmd->device->lun);
2120 ahd_cmd_set_transaction_status(cmd, new_status);
2126 ahd_freeze_simq(struct ahd_softc *ahd)
2128 scsi_block_requests(ahd->platform_data->host);
2132 ahd_release_simq(struct ahd_softc *ahd)
2134 scsi_unblock_requests(ahd->platform_data->host);
2138 ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
2140 struct ahd_softc *ahd;
2141 struct ahd_linux_device *dev;
2142 struct scb *pending_scb;
2144 u_int active_scbptr;
2147 int retval = SUCCESS;
2152 ahd_mode_state saved_modes;
2153 unsigned long flags;
2158 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
2160 scmd_printk(KERN_INFO, cmd,
2161 "Attempting to queue an ABORT message:");
2164 for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
2165 printk(" 0x%x", cmd->cmnd[cdb_byte]);
2168 ahd_lock(ahd, &flags);
2171 * First determine if we currently own this command.
2172 * Start by searching the device queue. If not found
2173 * there, check the pending_scb list. If not found
2174 * at all, and the system wanted us to just abort the
2175 * command, return success.
2177 dev = scsi_transport_device_data(cmd->device);
2181 * No target device for this command exists,
2182 * so we must not still own the command.
2184 scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
2189 * See if we can find a matching cmd in the pending list.
2191 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
2192 if (pending_scb->io_ctx == cmd)
2196 if (pending_scb == NULL) {
2197 scmd_printk(KERN_INFO, cmd, "Command not found\n");
2201 if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) {
2203 * We can't queue two recovery actions using the same SCB
2210 * Ensure that the card doesn't do anything
2211 * behind our back. Also make sure that we
2212 * didn't "just" miss an interrupt that would
2215 was_paused = ahd_is_paused(ahd);
2216 ahd_pause_and_flushwork(ahd);
2219 if ((pending_scb->flags & SCB_ACTIVE) == 0) {
2220 scmd_printk(KERN_INFO, cmd, "Command already completed\n");
2224 printk("%s: At time of recovery, card was %spaused\n",
2225 ahd_name(ahd), was_paused ? "" : "not ");
2226 ahd_dump_card_state(ahd);
2228 disconnected = TRUE;
2229 if (ahd_search_qinfifo(ahd, cmd->device->id,
2230 cmd->device->channel + 'A',
2232 pending_scb->hscb->tag,
2233 ROLE_INITIATOR, CAM_REQ_ABORTED,
2234 SEARCH_COMPLETE) > 0) {
2235 printk("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
2236 ahd_name(ahd), cmd->device->channel,
2237 cmd->device->id, (u8)cmd->device->lun);
2241 saved_modes = ahd_save_modes(ahd);
2242 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2243 last_phase = ahd_inb(ahd, LASTPHASE);
2244 saved_scbptr = ahd_get_scbptr(ahd);
2245 active_scbptr = saved_scbptr;
2246 if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) {
2247 struct scb *bus_scb;
2249 bus_scb = ahd_lookup_scb(ahd, active_scbptr);
2250 if (bus_scb == pending_scb)
2251 disconnected = FALSE;
2255 * At this point, pending_scb is the scb associated with the
2256 * passed in command. That command is currently active on the
2257 * bus or is in the disconnected state.
2259 ahd_inb(ahd, SAVED_SCSIID);
2260 if (last_phase != P_BUSFREE
2261 && SCB_GET_TAG(pending_scb) == active_scbptr) {
2264 * We're active on the bus, so assert ATN
2265 * and hope that the target responds.
2267 pending_scb = ahd_lookup_scb(ahd, active_scbptr);
2268 pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2269 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2270 ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
2271 scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n");
2273 } else if (disconnected) {
2276 * Actually re-queue this SCB in an attempt
2277 * to select the device before it reconnects.
2279 pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2280 ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb));
2281 pending_scb->hscb->cdb_len = 0;
2282 pending_scb->hscb->task_attribute = 0;
2283 pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK;
2285 if ((pending_scb->flags & SCB_PACKETIZED) != 0) {
2287 * Mark the SCB has having an outstanding
2288 * task management function. Should the command
2289 * complete normally before the task management
2290 * function can be sent, the host will be notified
2291 * to abort our requeued SCB.
2293 ahd_outb(ahd, SCB_TASK_MANAGEMENT,
2294 pending_scb->hscb->task_management);
2297 * If non-packetized, set the MK_MESSAGE control
2298 * bit indicating that we desire to send a message.
2299 * We also set the disconnected flag since there is
2300 * no guarantee that our SCB control byte matches
2301 * the version on the card. We don't want the
2302 * sequencer to abort the command thinking an
2303 * unsolicited reselection occurred.
2305 pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
2308 * The sequencer will never re-reference the
2309 * in-core SCB. To make sure we are notified
2310 * during reselection, set the MK_MESSAGE flag in
2311 * the card's copy of the SCB.
2313 ahd_outb(ahd, SCB_CONTROL,
2314 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE);
2318 * Clear out any entries in the QINFIFO first
2319 * so we are the next SCB for this target
2322 ahd_search_qinfifo(ahd, cmd->device->id,
2323 cmd->device->channel + 'A', cmd->device->lun,
2324 SCB_LIST_NULL, ROLE_INITIATOR,
2325 CAM_REQUEUE_REQ, SEARCH_COMPLETE);
2326 ahd_qinfifo_requeue_tail(ahd, pending_scb);
2327 ahd_set_scbptr(ahd, saved_scbptr);
2328 ahd_print_path(ahd, pending_scb);
2329 printk("Device is disconnected, re-queuing SCB\n");
2332 scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n");
2337 ahd_restore_modes(ahd, saved_modes);
2342 DECLARE_COMPLETION_ONSTACK(done);
2344 ahd->platform_data->eh_done = &done;
2345 ahd_unlock(ahd, &flags);
2347 printk("%s: Recovery code sleeping\n", ahd_name(ahd));
2348 if (!wait_for_completion_timeout(&done, 5 * HZ)) {
2349 ahd_lock(ahd, &flags);
2350 ahd->platform_data->eh_done = NULL;
2351 ahd_unlock(ahd, &flags);
2352 printk("%s: Timer Expired (active %d)\n",
2353 ahd_name(ahd), dev->active);
2356 printk("Recovery code awake\n");
2358 ahd_unlock(ahd, &flags);
2360 if (retval != SUCCESS)
2361 printk("%s: Command abort returning 0x%x\n",
2362 ahd_name(ahd), retval);
2367 static void ahd_linux_set_width(struct scsi_target *starget, int width)
2369 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2370 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2371 struct ahd_devinfo devinfo;
2372 unsigned long flags;
2374 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2375 starget->channel + 'A', ROLE_INITIATOR);
2376 ahd_lock(ahd, &flags);
2377 ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE);
2378 ahd_unlock(ahd, &flags);
2381 static void ahd_linux_set_period(struct scsi_target *starget, int period)
2383 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2384 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2385 struct ahd_tmode_tstate *tstate;
2386 struct ahd_initiator_tinfo *tinfo
2387 = ahd_fetch_transinfo(ahd,
2388 starget->channel + 'A',
2389 shost->this_id, starget->id, &tstate);
2390 struct ahd_devinfo devinfo;
2391 unsigned int ppr_options = tinfo->goal.ppr_options;
2393 unsigned long flags;
2394 unsigned long offset = tinfo->goal.offset;
2397 if ((ahd_debug & AHD_SHOW_DV) != 0)
2398 printk("%s: set period to %d\n", ahd_name(ahd), period);
2401 offset = MAX_OFFSET;
2406 if (spi_max_width(starget)) {
2407 ppr_options |= MSG_EXT_PPR_DT_REQ;
2409 ppr_options |= MSG_EXT_PPR_IU_REQ;
2414 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2416 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2417 starget->channel + 'A', ROLE_INITIATOR);
2419 /* all PPR requests apart from QAS require wide transfers */
2420 if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) {
2421 if (spi_width(starget) == 0)
2422 ppr_options &= MSG_EXT_PPR_QAS_REQ;
2425 ahd_find_syncrate(ahd, &period, &ppr_options,
2426 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2428 ahd_lock(ahd, &flags);
2429 ahd_set_syncrate(ahd, &devinfo, period, offset,
2430 ppr_options, AHD_TRANS_GOAL, FALSE);
2431 ahd_unlock(ahd, &flags);
2434 static void ahd_linux_set_offset(struct scsi_target *starget, int offset)
2436 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2437 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2438 struct ahd_tmode_tstate *tstate;
2439 struct ahd_initiator_tinfo *tinfo
2440 = ahd_fetch_transinfo(ahd,
2441 starget->channel + 'A',
2442 shost->this_id, starget->id, &tstate);
2443 struct ahd_devinfo devinfo;
2444 unsigned int ppr_options = 0;
2445 unsigned int period = 0;
2446 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2447 unsigned long flags;
2450 if ((ahd_debug & AHD_SHOW_DV) != 0)
2451 printk("%s: set offset to %d\n", ahd_name(ahd), offset);
2454 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2455 starget->channel + 'A', ROLE_INITIATOR);
2457 period = tinfo->goal.period;
2458 ppr_options = tinfo->goal.ppr_options;
2459 ahd_find_syncrate(ahd, &period, &ppr_options,
2460 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2463 ahd_lock(ahd, &flags);
2464 ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options,
2465 AHD_TRANS_GOAL, FALSE);
2466 ahd_unlock(ahd, &flags);
2469 static void ahd_linux_set_dt(struct scsi_target *starget, int dt)
2471 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2472 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2473 struct ahd_tmode_tstate *tstate;
2474 struct ahd_initiator_tinfo *tinfo
2475 = ahd_fetch_transinfo(ahd,
2476 starget->channel + 'A',
2477 shost->this_id, starget->id, &tstate);
2478 struct ahd_devinfo devinfo;
2479 unsigned int ppr_options = tinfo->goal.ppr_options
2480 & ~MSG_EXT_PPR_DT_REQ;
2481 unsigned int period = tinfo->goal.period;
2482 unsigned int width = tinfo->goal.width;
2483 unsigned long flags;
2486 if ((ahd_debug & AHD_SHOW_DV) != 0)
2487 printk("%s: %s DT\n", ahd_name(ahd),
2488 dt ? "enabling" : "disabling");
2490 if (dt && spi_max_width(starget)) {
2491 ppr_options |= MSG_EXT_PPR_DT_REQ;
2493 ahd_linux_set_width(starget, 1);
2496 period = 10; /* If resetting DT, period must be >= 25ns */
2497 /* IU is invalid without DT set */
2498 ppr_options &= ~MSG_EXT_PPR_IU_REQ;
2500 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2501 starget->channel + 'A', ROLE_INITIATOR);
2502 ahd_find_syncrate(ahd, &period, &ppr_options,
2503 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2505 ahd_lock(ahd, &flags);
2506 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2507 ppr_options, AHD_TRANS_GOAL, FALSE);
2508 ahd_unlock(ahd, &flags);
2511 static void ahd_linux_set_qas(struct scsi_target *starget, int qas)
2513 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2514 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2515 struct ahd_tmode_tstate *tstate;
2516 struct ahd_initiator_tinfo *tinfo
2517 = ahd_fetch_transinfo(ahd,
2518 starget->channel + 'A',
2519 shost->this_id, starget->id, &tstate);
2520 struct ahd_devinfo devinfo;
2521 unsigned int ppr_options = tinfo->goal.ppr_options
2522 & ~MSG_EXT_PPR_QAS_REQ;
2523 unsigned int period = tinfo->goal.period;
2525 unsigned long flags;
2528 if ((ahd_debug & AHD_SHOW_DV) != 0)
2529 printk("%s: %s QAS\n", ahd_name(ahd),
2530 qas ? "enabling" : "disabling");
2534 ppr_options |= MSG_EXT_PPR_QAS_REQ;
2537 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2539 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2540 starget->channel + 'A', ROLE_INITIATOR);
2541 ahd_find_syncrate(ahd, &period, &ppr_options,
2542 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2544 ahd_lock(ahd, &flags);
2545 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2546 ppr_options, AHD_TRANS_GOAL, FALSE);
2547 ahd_unlock(ahd, &flags);
2550 static void ahd_linux_set_iu(struct scsi_target *starget, int iu)
2552 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2553 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2554 struct ahd_tmode_tstate *tstate;
2555 struct ahd_initiator_tinfo *tinfo
2556 = ahd_fetch_transinfo(ahd,
2557 starget->channel + 'A',
2558 shost->this_id, starget->id, &tstate);
2559 struct ahd_devinfo devinfo;
2560 unsigned int ppr_options = tinfo->goal.ppr_options
2561 & ~MSG_EXT_PPR_IU_REQ;
2562 unsigned int period = tinfo->goal.period;
2564 unsigned long flags;
2567 if ((ahd_debug & AHD_SHOW_DV) != 0)
2568 printk("%s: %s IU\n", ahd_name(ahd),
2569 iu ? "enabling" : "disabling");
2572 if (iu && spi_max_width(starget)) {
2573 ppr_options |= MSG_EXT_PPR_IU_REQ;
2574 ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */
2577 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2579 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2580 starget->channel + 'A', ROLE_INITIATOR);
2581 ahd_find_syncrate(ahd, &period, &ppr_options,
2582 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2584 ahd_lock(ahd, &flags);
2585 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2586 ppr_options, AHD_TRANS_GOAL, FALSE);
2587 ahd_unlock(ahd, &flags);
2590 static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm)
2592 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2593 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2594 struct ahd_tmode_tstate *tstate;
2595 struct ahd_initiator_tinfo *tinfo
2596 = ahd_fetch_transinfo(ahd,
2597 starget->channel + 'A',
2598 shost->this_id, starget->id, &tstate);
2599 struct ahd_devinfo devinfo;
2600 unsigned int ppr_options = tinfo->goal.ppr_options
2601 & ~MSG_EXT_PPR_RD_STRM;
2602 unsigned int period = tinfo->goal.period;
2603 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2604 unsigned long flags;
2607 if ((ahd_debug & AHD_SHOW_DV) != 0)
2608 printk("%s: %s Read Streaming\n", ahd_name(ahd),
2609 rdstrm ? "enabling" : "disabling");
2612 if (rdstrm && spi_max_width(starget))
2613 ppr_options |= MSG_EXT_PPR_RD_STRM;
2615 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2616 starget->channel + 'A', ROLE_INITIATOR);
2617 ahd_find_syncrate(ahd, &period, &ppr_options,
2618 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2620 ahd_lock(ahd, &flags);
2621 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2622 ppr_options, AHD_TRANS_GOAL, FALSE);
2623 ahd_unlock(ahd, &flags);
2626 static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow)
2628 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2629 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2630 struct ahd_tmode_tstate *tstate;
2631 struct ahd_initiator_tinfo *tinfo
2632 = ahd_fetch_transinfo(ahd,
2633 starget->channel + 'A',
2634 shost->this_id, starget->id, &tstate);
2635 struct ahd_devinfo devinfo;
2636 unsigned int ppr_options = tinfo->goal.ppr_options
2637 & ~MSG_EXT_PPR_WR_FLOW;
2638 unsigned int period = tinfo->goal.period;
2639 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2640 unsigned long flags;
2643 if ((ahd_debug & AHD_SHOW_DV) != 0)
2644 printk("%s: %s Write Flow Control\n", ahd_name(ahd),
2645 wrflow ? "enabling" : "disabling");
2648 if (wrflow && spi_max_width(starget))
2649 ppr_options |= MSG_EXT_PPR_WR_FLOW;
2651 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2652 starget->channel + 'A', ROLE_INITIATOR);
2653 ahd_find_syncrate(ahd, &period, &ppr_options,
2654 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2656 ahd_lock(ahd, &flags);
2657 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2658 ppr_options, AHD_TRANS_GOAL, FALSE);
2659 ahd_unlock(ahd, &flags);
2662 static void ahd_linux_set_rti(struct scsi_target *starget, int rti)
2664 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2665 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2666 struct ahd_tmode_tstate *tstate;
2667 struct ahd_initiator_tinfo *tinfo
2668 = ahd_fetch_transinfo(ahd,
2669 starget->channel + 'A',
2670 shost->this_id, starget->id, &tstate);
2671 struct ahd_devinfo devinfo;
2672 unsigned int ppr_options = tinfo->goal.ppr_options
2674 unsigned int period = tinfo->goal.period;
2675 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2676 unsigned long flags;
2678 if ((ahd->features & AHD_RTI) == 0) {
2680 if ((ahd_debug & AHD_SHOW_DV) != 0)
2681 printk("%s: RTI not available\n", ahd_name(ahd));
2687 if ((ahd_debug & AHD_SHOW_DV) != 0)
2688 printk("%s: %s RTI\n", ahd_name(ahd),
2689 rti ? "enabling" : "disabling");
2692 if (rti && spi_max_width(starget))
2693 ppr_options |= MSG_EXT_PPR_RTI;
2695 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2696 starget->channel + 'A', ROLE_INITIATOR);
2697 ahd_find_syncrate(ahd, &period, &ppr_options,
2698 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2700 ahd_lock(ahd, &flags);
2701 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2702 ppr_options, AHD_TRANS_GOAL, FALSE);
2703 ahd_unlock(ahd, &flags);
2706 static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
2708 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2709 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2710 struct ahd_tmode_tstate *tstate;
2711 struct ahd_initiator_tinfo *tinfo
2712 = ahd_fetch_transinfo(ahd,
2713 starget->channel + 'A',
2714 shost->this_id, starget->id, &tstate);
2715 struct ahd_devinfo devinfo;
2716 unsigned int ppr_options = tinfo->goal.ppr_options
2717 & ~MSG_EXT_PPR_PCOMP_EN;
2718 unsigned int period = tinfo->goal.period;
2719 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2720 unsigned long flags;
2723 if ((ahd_debug & AHD_SHOW_DV) != 0)
2724 printk("%s: %s Precompensation\n", ahd_name(ahd),
2725 pcomp ? "Enable" : "Disable");
2728 if (pcomp && spi_max_width(starget)) {
2731 if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
2732 const struct ahd_linux_iocell_opts *iocell_opts;
2734 iocell_opts = &aic79xx_iocell_info[ahd->unit];
2735 precomp = iocell_opts->precomp;
2737 precomp = AIC79XX_DEFAULT_PRECOMP;
2739 ppr_options |= MSG_EXT_PPR_PCOMP_EN;
2740 AHD_SET_PRECOMP(ahd, precomp);
2742 AHD_SET_PRECOMP(ahd, 0);
2745 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2746 starget->channel + 'A', ROLE_INITIATOR);
2747 ahd_find_syncrate(ahd, &period, &ppr_options,
2748 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2750 ahd_lock(ahd, &flags);
2751 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2752 ppr_options, AHD_TRANS_GOAL, FALSE);
2753 ahd_unlock(ahd, &flags);
2756 static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold)
2758 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2759 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2760 struct ahd_tmode_tstate *tstate;
2761 struct ahd_initiator_tinfo *tinfo
2762 = ahd_fetch_transinfo(ahd,
2763 starget->channel + 'A',
2764 shost->this_id, starget->id, &tstate);
2765 struct ahd_devinfo devinfo;
2766 unsigned int ppr_options = tinfo->goal.ppr_options
2767 & ~MSG_EXT_PPR_HOLD_MCS;
2768 unsigned int period = tinfo->goal.period;
2769 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2770 unsigned long flags;
2772 if (hold && spi_max_width(starget))
2773 ppr_options |= MSG_EXT_PPR_HOLD_MCS;
2775 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2776 starget->channel + 'A', ROLE_INITIATOR);
2777 ahd_find_syncrate(ahd, &period, &ppr_options,
2778 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2780 ahd_lock(ahd, &flags);
2781 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2782 ppr_options, AHD_TRANS_GOAL, FALSE);
2783 ahd_unlock(ahd, &flags);
2786 static void ahd_linux_get_signalling(struct Scsi_Host *shost)
2788 struct ahd_softc *ahd = *(struct ahd_softc **)shost->hostdata;
2789 unsigned long flags;
2792 ahd_lock(ahd, &flags);
2794 mode = ahd_inb(ahd, SBLKCTL);
2796 ahd_unlock(ahd, &flags);
2799 spi_signalling(shost) = SPI_SIGNAL_LVD;
2800 else if (mode & ENAB20)
2801 spi_signalling(shost) = SPI_SIGNAL_SE;
2803 spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
2806 static struct spi_function_template ahd_linux_transport_functions = {
2807 .set_offset = ahd_linux_set_offset,
2809 .set_period = ahd_linux_set_period,
2811 .set_width = ahd_linux_set_width,
2813 .set_dt = ahd_linux_set_dt,
2815 .set_iu = ahd_linux_set_iu,
2817 .set_qas = ahd_linux_set_qas,
2819 .set_rd_strm = ahd_linux_set_rd_strm,
2821 .set_wr_flow = ahd_linux_set_wr_flow,
2823 .set_rti = ahd_linux_set_rti,
2825 .set_pcomp_en = ahd_linux_set_pcomp_en,
2827 .set_hold_mcs = ahd_linux_set_hold_mcs,
2829 .get_signalling = ahd_linux_get_signalling,
2833 ahd_linux_init(void)
2838 * If we've been passed any parameters, process them now.
2841 aic79xx_setup(aic79xx);
2843 ahd_linux_transport_template =
2844 spi_attach_transport(&ahd_linux_transport_functions);
2845 if (!ahd_linux_transport_template)
2848 scsi_transport_reserve_device(ahd_linux_transport_template,
2849 sizeof(struct ahd_linux_device));
2851 error = ahd_linux_pci_init();
2853 spi_release_transport(ahd_linux_transport_template);
2858 ahd_linux_exit(void)
2860 ahd_linux_pci_exit();
2861 spi_release_transport(ahd_linux_transport_template);
2864 module_init(ahd_linux_init);
2865 module_exit(ahd_linux_exit);