1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Adaptec AAC series RAID controller driver
4 * (c) Copyright 2001 Red Hat Inc.
6 * based on the old aacraid driver that is..
7 * Adaptec aacraid device driver for Linux.
9 * Copyright (c) 2000-2010 Adaptec, Inc.
10 * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
11 * 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
16 * Abstract: Linux Driver entry module for Adaptec RAID Array Controller
20 #include <linux/compat.h>
21 #include <linux/blkdev.h>
22 #include <linux/completion.h>
23 #include <linux/init.h>
24 #include <linux/interrupt.h>
25 #include <linux/kernel.h>
26 #include <linux/module.h>
27 #include <linux/moduleparam.h>
28 #include <linux/pci.h>
29 #include <linux/aer.h>
30 #include <linux/slab.h>
31 #include <linux/mutex.h>
32 #include <linux/spinlock.h>
33 #include <linux/syscalls.h>
34 #include <linux/delay.h>
35 #include <linux/kthread.h>
37 #include <scsi/scsi.h>
38 #include <scsi/scsi_cmnd.h>
39 #include <scsi/scsi_device.h>
40 #include <scsi/scsi_host.h>
41 #include <scsi/scsi_tcq.h>
42 #include <scsi/scsicam.h>
43 #include <scsi/scsi_eh.h>
47 #define AAC_DRIVER_VERSION "1.2.1"
48 #ifndef AAC_DRIVER_BRANCH
49 #define AAC_DRIVER_BRANCH ""
51 #define AAC_DRIVERNAME "aacraid"
53 #ifdef AAC_DRIVER_BUILD
55 #define str(x) _str(x)
56 #define AAC_DRIVER_FULL_VERSION AAC_DRIVER_VERSION "[" str(AAC_DRIVER_BUILD) "]" AAC_DRIVER_BRANCH
58 #define AAC_DRIVER_FULL_VERSION AAC_DRIVER_VERSION AAC_DRIVER_BRANCH
61 MODULE_AUTHOR("Red Hat Inc and Adaptec");
62 MODULE_DESCRIPTION("Dell PERC2, 2/Si, 3/Si, 3/Di, "
63 "Adaptec Advanced Raid Products, "
64 "HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver");
65 MODULE_LICENSE("GPL");
66 MODULE_VERSION(AAC_DRIVER_FULL_VERSION);
68 static DEFINE_MUTEX(aac_mutex);
69 static LIST_HEAD(aac_devices);
70 static int aac_cfg_major = AAC_CHARDEV_UNREGISTERED;
71 char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;
74 * Because of the way Linux names scsi devices, the order in this table has
75 * become important. Check for on-board Raid first, add-in cards second.
77 * Note: The last field is used to index into aac_drivers below.
79 static const struct pci_device_id aac_pci_tbl[] = {
80 { 0x1028, 0x0001, 0x1028, 0x0001, 0, 0, 0 }, /* PERC 2/Si (Iguana/PERC2Si) */
81 { 0x1028, 0x0002, 0x1028, 0x0002, 0, 0, 1 }, /* PERC 3/Di (Opal/PERC3Di) */
82 { 0x1028, 0x0003, 0x1028, 0x0003, 0, 0, 2 }, /* PERC 3/Si (SlimFast/PERC3Si */
83 { 0x1028, 0x0004, 0x1028, 0x00d0, 0, 0, 3 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */
84 { 0x1028, 0x0002, 0x1028, 0x00d1, 0, 0, 4 }, /* PERC 3/Di (Viper/PERC3DiV) */
85 { 0x1028, 0x0002, 0x1028, 0x00d9, 0, 0, 5 }, /* PERC 3/Di (Lexus/PERC3DiL) */
86 { 0x1028, 0x000a, 0x1028, 0x0106, 0, 0, 6 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */
87 { 0x1028, 0x000a, 0x1028, 0x011b, 0, 0, 7 }, /* PERC 3/Di (Dagger/PERC3DiD) */
88 { 0x1028, 0x000a, 0x1028, 0x0121, 0, 0, 8 }, /* PERC 3/Di (Boxster/PERC3DiB) */
89 { 0x9005, 0x0283, 0x9005, 0x0283, 0, 0, 9 }, /* catapult */
90 { 0x9005, 0x0284, 0x9005, 0x0284, 0, 0, 10 }, /* tomcat */
91 { 0x9005, 0x0285, 0x9005, 0x0286, 0, 0, 11 }, /* Adaptec 2120S (Crusader) */
92 { 0x9005, 0x0285, 0x9005, 0x0285, 0, 0, 12 }, /* Adaptec 2200S (Vulcan) */
93 { 0x9005, 0x0285, 0x9005, 0x0287, 0, 0, 13 }, /* Adaptec 2200S (Vulcan-2m) */
94 { 0x9005, 0x0285, 0x17aa, 0x0286, 0, 0, 14 }, /* Legend S220 (Legend Crusader) */
95 { 0x9005, 0x0285, 0x17aa, 0x0287, 0, 0, 15 }, /* Legend S230 (Legend Vulcan) */
97 { 0x9005, 0x0285, 0x9005, 0x0288, 0, 0, 16 }, /* Adaptec 3230S (Harrier) */
98 { 0x9005, 0x0285, 0x9005, 0x0289, 0, 0, 17 }, /* Adaptec 3240S (Tornado) */
99 { 0x9005, 0x0285, 0x9005, 0x028a, 0, 0, 18 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */
100 { 0x9005, 0x0285, 0x9005, 0x028b, 0, 0, 19 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */
101 { 0x9005, 0x0286, 0x9005, 0x028c, 0, 0, 20 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */
102 { 0x9005, 0x0286, 0x9005, 0x028d, 0, 0, 21 }, /* ASR-2130S (Lancer) */
103 { 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */
104 { 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */
105 { 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */
106 { 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024RO (Lancer) */
107 { 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014RO (Lancer) */
108 { 0x9005, 0x0286, 0x9005, 0x02a0, 0, 0, 27 }, /* ICP9047MA (Lancer) */
109 { 0x9005, 0x0286, 0x9005, 0x02a1, 0, 0, 28 }, /* ICP9087MA (Lancer) */
110 { 0x9005, 0x0286, 0x9005, 0x02a3, 0, 0, 29 }, /* ICP5445AU (Hurricane44) */
111 { 0x9005, 0x0285, 0x9005, 0x02a4, 0, 0, 30 }, /* ICP9085LI (Marauder-X) */
112 { 0x9005, 0x0285, 0x9005, 0x02a5, 0, 0, 31 }, /* ICP5085BR (Marauder-E) */
113 { 0x9005, 0x0286, 0x9005, 0x02a6, 0, 0, 32 }, /* ICP9067MA (Intruder-6) */
114 { 0x9005, 0x0287, 0x9005, 0x0800, 0, 0, 33 }, /* Themisto Jupiter Platform */
115 { 0x9005, 0x0200, 0x9005, 0x0200, 0, 0, 33 }, /* Themisto Jupiter Platform */
116 { 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 34 }, /* Callisto Jupiter Platform */
117 { 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 35 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
118 { 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 36 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
119 { 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 37 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
120 { 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 38 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
121 { 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 39 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
122 { 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 40 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
123 { 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 41 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
124 { 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 42 }, /* AAR-2610SA PCI SATA 6ch */
125 { 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 43 }, /* ASR-2240S (SabreExpress) */
126 { 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 44 }, /* ASR-4005 */
127 { 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 45 }, /* IBM 8i (AvonPark) */
128 { 0x9005, 0x0285, 0x1014, 0x0312, 0, 0, 45 }, /* IBM 8i (AvonPark Lite) */
129 { 0x9005, 0x0286, 0x1014, 0x9580, 0, 0, 46 }, /* IBM 8k/8k-l8 (Aurora) */
130 { 0x9005, 0x0286, 0x1014, 0x9540, 0, 0, 47 }, /* IBM 8k/8k-l4 (Aurora Lite) */
131 { 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 48 }, /* ASR-4000 (BlackBird) */
132 { 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 49 }, /* ASR-4800SAS (Marauder-X) */
133 { 0x9005, 0x0285, 0x9005, 0x029a, 0, 0, 50 }, /* ASR-4805SAS (Marauder-E) */
134 { 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 51 }, /* ASR-3800 (Hurricane44) */
136 { 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 52 }, /* Perc 320/DC*/
137 { 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 53 }, /* Adaptec 5400S (Mustang)*/
138 { 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 54 }, /* Adaptec 5400S (Mustang)*/
139 { 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 55 }, /* Dell PERC2/QC */
140 { 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 56 }, /* HP NetRAID-4M */
142 { 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 57 }, /* Dell Catchall */
143 { 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 58 }, /* Legend Catchall */
144 { 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 59 }, /* Adaptec Catch All */
145 { 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 60 }, /* Adaptec Rocket Catch All */
146 { 0x9005, 0x0288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 61 }, /* Adaptec NEMER/ARK Catch All */
147 { 0x9005, 0x028b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 62 }, /* Adaptec PMC Series 6 (Tupelo) */
148 { 0x9005, 0x028c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 63 }, /* Adaptec PMC Series 7 (Denali) */
149 { 0x9005, 0x028d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 64 }, /* Adaptec PMC Series 8 */
152 MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
155 * dmb - For now we add the number of channels to this structure.
156 * In the future we should add a fib that reports the number of channels
157 * for the card. At that time we can remove the channels from here
159 static struct aac_driver_ident aac_drivers[] = {
160 { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 2/Si (Iguana/PERC2Si) */
161 { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Opal/PERC3Di) */
162 { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Si (SlimFast/PERC3Si */
163 { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */
164 { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Viper/PERC3DiV) */
165 { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Lexus/PERC3DiL) */
166 { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */
167 { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Dagger/PERC3DiD) */
168 { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
169 { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
170 { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
171 { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */
172 { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */
173 { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
174 { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
175 { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */
177 { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3230S ", 2 }, /* Adaptec 3230S (Harrier) */
178 { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3240S ", 2 }, /* Adaptec 3240S (Tornado) */
179 { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020ZCR ", 2 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */
180 { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025ZCR ", 2 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */
181 { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-2230S PCI-X ", 2 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */
182 { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-2130S PCI-X ", 1 }, /* ASR-2130S (Lancer) */
183 { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2820SA ", 1 }, /* AAR-2820SA (Intruder) */
184 { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2620SA ", 1 }, /* AAR-2620SA (Intruder) */
185 { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2420SA ", 1 }, /* AAR-2420SA (Intruder) */
186 { aac_rkt_init, "aacraid", "ICP ", "ICP9024RO ", 2 }, /* ICP9024RO (Lancer) */
187 { aac_rkt_init, "aacraid", "ICP ", "ICP9014RO ", 1 }, /* ICP9014RO (Lancer) */
188 { aac_rkt_init, "aacraid", "ICP ", "ICP9047MA ", 1 }, /* ICP9047MA (Lancer) */
189 { aac_rkt_init, "aacraid", "ICP ", "ICP9087MA ", 1 }, /* ICP9087MA (Lancer) */
190 { aac_rkt_init, "aacraid", "ICP ", "ICP5445AU ", 1 }, /* ICP5445AU (Hurricane44) */
191 { aac_rx_init, "aacraid", "ICP ", "ICP9085LI ", 1 }, /* ICP9085LI (Marauder-X) */
192 { aac_rx_init, "aacraid", "ICP ", "ICP5085BR ", 1 }, /* ICP5085BR (Marauder-E) */
193 { aac_rkt_init, "aacraid", "ICP ", "ICP9067MA ", 1 }, /* ICP9067MA (Intruder-6) */
194 { NULL , "aacraid", "ADAPTEC ", "Themisto ", 0, AAC_QUIRK_SLAVE }, /* Jupiter Platform */
195 { aac_rkt_init, "aacraid", "ADAPTEC ", "Callisto ", 2, AAC_QUIRK_MASTER }, /* Jupiter Platform */
196 { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020SA ", 1 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
197 { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025SA ", 1 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
198 { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2410SA SATA ", 1, AAC_QUIRK_17SG }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
199 { aac_rx_init, "aacraid", "DELL ", "CERC SR2 ", 1, AAC_QUIRK_17SG }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
200 { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2810SA SATA ", 1, AAC_QUIRK_17SG }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
201 { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-21610SA SATA", 1, AAC_QUIRK_17SG }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
202 { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2026ZCR ", 1 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
203 { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2610SA ", 1 }, /* SATA 6Ch (Bearcat) */
204 { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2240S ", 1 }, /* ASR-2240S (SabreExpress) */
205 { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4005 ", 1 }, /* ASR-4005 */
206 { aac_rx_init, "ServeRAID","IBM ", "ServeRAID 8i ", 1 }, /* IBM 8i (AvonPark) */
207 { aac_rkt_init, "ServeRAID","IBM ", "ServeRAID 8k-l8 ", 1 }, /* IBM 8k/8k-l8 (Aurora) */
208 { aac_rkt_init, "ServeRAID","IBM ", "ServeRAID 8k-l4 ", 1 }, /* IBM 8k/8k-l4 (Aurora Lite) */
209 { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4000 ", 1 }, /* ASR-4000 (BlackBird & AvonPark) */
210 { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4800SAS ", 1 }, /* ASR-4800SAS (Marauder-X) */
211 { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4805SAS ", 1 }, /* ASR-4805SAS (Marauder-E) */
212 { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-3800 ", 1 }, /* ASR-3800 (Hurricane44) */
214 { aac_rx_init, "percraid", "DELL ", "PERC 320/DC ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
215 { aac_sa_init, "aacraid", "ADAPTEC ", "Adaptec 5400S ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
216 { aac_sa_init, "aacraid", "ADAPTEC ", "AAC-364 ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
217 { aac_sa_init, "percraid", "DELL ", "PERCRAID ", 4, AAC_QUIRK_34SG }, /* Dell PERC2/QC */
218 { aac_sa_init, "hpnraid", "HP ", "NetRAID ", 4, AAC_QUIRK_34SG }, /* HP NetRAID-4M */
220 { aac_rx_init, "aacraid", "DELL ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Dell Catchall */
221 { aac_rx_init, "aacraid", "Legend ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend Catchall */
222 { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */
223 { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */
224 { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec NEMER/ARK Catch All */
225 { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 6 (Tupelo) */
226 { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 7 (Denali) */
227 { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 8 */
231 * aac_queuecommand - queue a SCSI command
232 * @cmd: SCSI command to queue
233 * @done: Function to call on command completion
235 * Queues a command for execution by the associated Host Adapter.
237 * TODO: unify with aac_scsi_cmd().
240 static int aac_queuecommand(struct Scsi_Host *shost,
241 struct scsi_cmnd *cmd)
244 cmd->SCp.phase = AAC_OWNER_LOWLEVEL;
245 r = (aac_scsi_cmd(cmd) ? FAILED : 0);
250 * aac_info - Returns the host adapter name
251 * @shost: Scsi host to report on
253 * Returns a static string describing the device in question
256 static const char *aac_info(struct Scsi_Host *shost)
258 struct aac_dev *dev = (struct aac_dev *)shost->hostdata;
259 return aac_drivers[dev->cardtype].name;
263 * aac_get_driver_ident
264 * @devtype: index into lookup table
266 * Returns a pointer to the entry in the driver lookup table.
269 struct aac_driver_ident* aac_get_driver_ident(int devtype)
271 return &aac_drivers[devtype];
275 * aac_biosparm - return BIOS parameters for disk
276 * @sdev: The scsi device corresponding to the disk
277 * @bdev: the block device corresponding to the disk
278 * @capacity: the sector capacity of the disk
279 * @geom: geometry block to fill in
281 * Return the Heads/Sectors/Cylinders BIOS Disk Parameters for Disk.
282 * The default disk geometry is 64 heads, 32 sectors, and the appropriate
283 * number of cylinders so as not to exceed drive capacity. In order for
284 * disks equal to or larger than 1 GB to be addressable by the BIOS
285 * without exceeding the BIOS limitation of 1024 cylinders, Extended
286 * Translation should be enabled. With Extended Translation enabled,
287 * drives between 1 GB inclusive and 2 GB exclusive are given a disk
288 * geometry of 128 heads and 32 sectors, and drives above 2 GB inclusive
289 * are given a disk geometry of 255 heads and 63 sectors. However, if
290 * the BIOS detects that the Extended Translation setting does not match
291 * the geometry in the partition table, then the translation inferred
292 * from the partition table will be used by the BIOS, and a warning may
296 static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev,
297 sector_t capacity, int *geom)
299 struct diskparm *param = (struct diskparm *)geom;
302 dprintk((KERN_DEBUG "aac_biosparm.\n"));
305 * Assuming extended translation is enabled - #REVISIT#
307 if (capacity >= 2 * 1024 * 1024) { /* 1 GB in 512 byte sectors */
308 if(capacity >= 4 * 1024 * 1024) { /* 2 GB in 512 byte sectors */
320 param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors);
323 * Read the first 1024 bytes from the disk device, if the boot
324 * sector partition table is valid, search for a partition table
325 * entry whose end_head matches one of the standard geometry
326 * translations ( 64/32, 128/32, 255/63 ).
328 buf = scsi_bios_ptable(bdev);
331 if(*(__le16 *)(buf + 0x40) == cpu_to_le16(0xaa55)) {
332 struct partition *first = (struct partition * )buf;
333 struct partition *entry = first;
334 int saved_cylinders = param->cylinders;
336 unsigned char end_head, end_sec;
338 for(num = 0; num < 4; num++) {
339 end_head = entry->end_head;
340 end_sec = entry->end_sector & 0x3f;
346 } else if(end_head == 127) {
350 } else if(end_head == 254) {
359 end_head = first->end_head;
360 end_sec = first->end_sector & 0x3f;
363 param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors);
364 if (num < 4 && end_sec == param->sectors) {
365 if (param->cylinders != saved_cylinders)
366 dprintk((KERN_DEBUG "Adopting geometry: heads=%d, sectors=%d from partition table %d.\n",
367 param->heads, param->sectors, num));
368 } else if (end_head > 0 || end_sec > 0) {
369 dprintk((KERN_DEBUG "Strange geometry: heads=%d, sectors=%d in partition table %d.\n",
370 end_head + 1, end_sec, num));
371 dprintk((KERN_DEBUG "Using geometry: heads=%d, sectors=%d.\n",
372 param->heads, param->sectors));
380 * aac_slave_configure - compute queue depths
381 * @sdev: SCSI device we are considering
383 * Selects queue depths for each target device based on the host adapter's
384 * total capacity and the queue depth supported by the target device.
385 * A queue depth of one automatically disables tagged queueing.
388 static int aac_slave_configure(struct scsi_device *sdev)
390 struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
392 unsigned int depth = 0;
393 unsigned int set_timeout = 0;
394 bool set_qd_dev_type = false;
397 chn = aac_logical_to_phys(sdev_channel(sdev));
399 if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS && aac->sa_firmware) {
400 devtype = aac->hba_map[chn][tid].devtype;
402 if (devtype == AAC_DEVTYPE_NATIVE_RAW) {
403 depth = aac->hba_map[chn][tid].qd_limit;
407 if (devtype == AAC_DEVTYPE_ARC_RAW) {
408 set_qd_dev_type = true;
414 if (aac->jbod && (sdev->type == TYPE_DISK))
417 if (sdev->type == TYPE_DISK
418 && sdev_channel(sdev) != CONTAINER_CHANNEL
419 && (!aac->jbod || sdev->inq_periph_qual)
420 && (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))) {
422 if (expose_physicals == 0)
425 if (expose_physicals < 0)
426 sdev->no_uld_attach = 1;
429 if (sdev->tagged_supported
430 && sdev->type == TYPE_DISK
431 && (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))
432 && !sdev->no_uld_attach) {
434 struct scsi_device * dev;
435 struct Scsi_Host *host = sdev->host;
436 unsigned num_lsu = 0;
437 unsigned num_one = 0;
442 for (cid = 0; cid < aac->maximum_num_containers; ++cid)
443 if (aac->fsa_dev[cid].valid)
446 __shost_for_each_device(dev, host) {
447 if (dev->tagged_supported
448 && dev->type == TYPE_DISK
449 && (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))
450 && !dev->no_uld_attach) {
451 if ((sdev_channel(dev) != CONTAINER_CHANNEL)
452 || !aac->fsa_dev[sdev_id(dev)].valid) {
463 depth = (host->can_queue - num_one) / num_lsu;
465 if (sdev_channel(sdev) != NATIVE_CHANNEL)
468 set_qd_dev_type = true;
475 * Check if SATA drive
477 if (set_qd_dev_type) {
478 if (strncmp(sdev->vendor, "ATA", 3) == 0)
485 * Firmware has an individual device recovery time typically
486 * of 35 seconds, give us a margin.
488 if (set_timeout && sdev->request_queue->rq_timeout < (45 * HZ))
489 blk_queue_rq_timeout(sdev->request_queue, 45*HZ);
496 scsi_change_queue_depth(sdev, depth);
498 sdev->tagged_supported = 1;
504 * aac_change_queue_depth - alter queue depths
505 * @sdev: SCSI device we are considering
506 * @depth: desired queue depth
508 * Alters queue depths for target device based on the host adapter's
509 * total capacity and the queue depth supported by the target device.
512 static int aac_change_queue_depth(struct scsi_device *sdev, int depth)
514 struct aac_dev *aac = (struct aac_dev *)(sdev->host->hostdata);
515 int chn, tid, is_native_device = 0;
517 chn = aac_logical_to_phys(sdev_channel(sdev));
519 if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS &&
520 aac->hba_map[chn][tid].devtype == AAC_DEVTYPE_NATIVE_RAW)
521 is_native_device = 1;
523 if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
524 (sdev_channel(sdev) == CONTAINER_CHANNEL)) {
525 struct scsi_device * dev;
526 struct Scsi_Host *host = sdev->host;
529 __shost_for_each_device(dev, host) {
530 if (dev->tagged_supported && (dev->type == TYPE_DISK) &&
531 (sdev_channel(dev) == CONTAINER_CHANNEL))
535 if (num >= host->can_queue)
536 num = host->can_queue - 1;
537 if (depth > (host->can_queue - num))
538 depth = host->can_queue - num;
543 return scsi_change_queue_depth(sdev, depth);
544 } else if (is_native_device) {
545 scsi_change_queue_depth(sdev, aac->hba_map[chn][tid].qd_limit);
547 scsi_change_queue_depth(sdev, 1);
549 return sdev->queue_depth;
552 static ssize_t aac_show_raid_level(struct device *dev, struct device_attribute *attr, char *buf)
554 struct scsi_device *sdev = to_scsi_device(dev);
555 struct aac_dev *aac = (struct aac_dev *)(sdev->host->hostdata);
556 if (sdev_channel(sdev) != CONTAINER_CHANNEL)
557 return snprintf(buf, PAGE_SIZE, sdev->no_uld_attach
559 ((aac->jbod && (sdev->type == TYPE_DISK)) ? "JBOD\n" : ""));
560 return snprintf(buf, PAGE_SIZE, "%s\n",
561 get_container_type(aac->fsa_dev[sdev_id(sdev)].type));
564 static struct device_attribute aac_raid_level_attr = {
569 .show = aac_show_raid_level
572 static ssize_t aac_show_unique_id(struct device *dev,
573 struct device_attribute *attr, char *buf)
575 struct scsi_device *sdev = to_scsi_device(dev);
576 struct aac_dev *aac = (struct aac_dev *)(sdev->host->hostdata);
577 unsigned char sn[16];
579 memset(sn, 0, sizeof(sn));
581 if (sdev_channel(sdev) == CONTAINER_CHANNEL)
582 memcpy(sn, aac->fsa_dev[sdev_id(sdev)].identifier, sizeof(sn));
584 return snprintf(buf, 16 * 2 + 2,
585 "%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X\n",
586 sn[0], sn[1], sn[2], sn[3],
587 sn[4], sn[5], sn[6], sn[7],
588 sn[8], sn[9], sn[10], sn[11],
589 sn[12], sn[13], sn[14], sn[15]);
592 static struct device_attribute aac_unique_id_attr = {
597 .show = aac_show_unique_id
602 static struct device_attribute *aac_dev_attrs[] = {
603 &aac_raid_level_attr,
608 static int aac_ioctl(struct scsi_device *sdev, unsigned int cmd,
611 struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
612 if (!capable(CAP_SYS_RAWIO))
614 return aac_do_ioctl(dev, cmd, arg);
617 static int get_num_of_incomplete_fibs(struct aac_dev *aac)
621 struct scsi_device *sdev = NULL;
622 struct Scsi_Host *shost = aac->scsi_host_ptr;
623 struct scsi_cmnd *scmnd = NULL;
624 struct device *ctrl_dev;
632 __shost_for_each_device(sdev, shost) {
633 spin_lock_irqsave(&sdev->list_lock, flags);
634 list_for_each_entry(scmnd, &sdev->cmd_list, list) {
635 switch (scmnd->SCp.phase) {
636 case AAC_OWNER_FIRMWARE:
639 case AAC_OWNER_ERROR_HANDLER:
642 case AAC_OWNER_LOWLEVEL:
645 case AAC_OWNER_MIDLEVEL:
653 spin_unlock_irqrestore(&sdev->list_lock, flags);
656 ctrl_dev = &aac->pdev->dev;
658 dev_info(ctrl_dev, "outstanding cmd: midlevel-%d\n", mlcnt);
659 dev_info(ctrl_dev, "outstanding cmd: lowlevel-%d\n", llcnt);
660 dev_info(ctrl_dev, "outstanding cmd: error handler-%d\n", ehcnt);
661 dev_info(ctrl_dev, "outstanding cmd: firmware-%d\n", fwcnt);
662 dev_info(ctrl_dev, "outstanding cmd: kernel-%d\n", krlcnt);
664 return mlcnt + llcnt + ehcnt + fwcnt;
667 static int aac_eh_abort(struct scsi_cmnd* cmd)
669 struct scsi_device * dev = cmd->device;
670 struct Scsi_Host * host = dev->host;
671 struct aac_dev * aac = (struct aac_dev *)host->hostdata;
676 if (aac_adapter_check_health(aac))
679 bus = aac_logical_to_phys(scmd_channel(cmd));
681 if (aac->hba_map[bus][cid].devtype == AAC_DEVTYPE_NATIVE_RAW) {
683 struct aac_hba_tm_req *tmf;
687 pr_err("%s: Host adapter abort request (%d,%d,%d,%d)\n",
689 host->host_no, sdev_channel(dev), sdev_id(dev), (int)dev->lun);
692 for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
693 fib = &aac->fibs[count];
694 if (*(u8 *)fib->hw_fib_va != 0 &&
695 (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA) &&
696 (fib->callback_data == cmd)) {
704 /* start a HBA_TMF_ABORT_TASK TMF request */
705 fib = aac_fib_alloc(aac);
709 tmf = (struct aac_hba_tm_req *)fib->hw_fib_va;
710 memset(tmf, 0, sizeof(*tmf));
711 tmf->tmf = HBA_TMF_ABORT_TASK;
712 tmf->it_nexus = aac->hba_map[bus][cid].rmw_nexus;
713 tmf->lun[1] = cmd->device->lun;
715 address = (u64)fib->hw_error_pa;
716 tmf->error_ptr_hi = cpu_to_le32((u32)(address >> 32));
717 tmf->error_ptr_lo = cpu_to_le32((u32)(address & 0xffffffff));
718 tmf->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
720 fib->hbacmd_size = sizeof(*tmf);
721 cmd->SCp.sent_command = 0;
723 status = aac_hba_send(HBA_IU_TYPE_SCSI_TM_REQ, fib,
724 (fib_callback) aac_hba_callback,
726 if (status != -EINPROGRESS) {
727 aac_fib_complete(fib);
731 /* Wait up to 15 secs for completion */
732 for (count = 0; count < 15; ++count) {
733 if (cmd->SCp.sent_command) {
741 pr_err("%s: Host adapter abort request timed out\n",
745 "%s: Host adapter abort request.\n"
746 "%s: Outstanding commands on (%d,%d,%d,%d):\n",
747 AAC_DRIVERNAME, AAC_DRIVERNAME,
748 host->host_no, sdev_channel(dev), sdev_id(dev),
750 switch (cmd->cmnd[0]) {
751 case SERVICE_ACTION_IN_16:
752 if (!(aac->raw_io_interface) ||
754 ((cmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
760 * Mark associated FIB to not complete,
761 * eh handler does this
764 count < (host->can_queue + AAC_NUM_MGT_FIB);
766 struct fib *fib = &aac->fibs[count];
768 if (fib->hw_fib_va->header.XferState &&
769 (fib->flags & FIB_CONTEXT_FLAG) &&
770 (fib->callback_data == cmd)) {
772 FIB_CONTEXT_FLAG_TIMED_OUT;
774 AAC_OWNER_ERROR_HANDLER;
779 case TEST_UNIT_READY:
781 * Mark associated FIB to not complete,
782 * eh handler does this
785 count < (host->can_queue + AAC_NUM_MGT_FIB);
787 struct scsi_cmnd *command;
788 struct fib *fib = &aac->fibs[count];
790 command = fib->callback_data;
792 if ((fib->hw_fib_va->header.XferState &
794 (Async | NoResponseExpected)) &&
795 (fib->flags & FIB_CONTEXT_FLAG) &&
797 (command->device == cmd->device)) {
799 FIB_CONTEXT_FLAG_TIMED_OUT;
801 AAC_OWNER_ERROR_HANDLER;
812 static u8 aac_eh_tmf_lun_reset_fib(struct aac_hba_map_info *info,
813 struct fib *fib, u64 tmf_lun)
815 struct aac_hba_tm_req *tmf;
818 /* start a HBA_TMF_LUN_RESET TMF request */
819 tmf = (struct aac_hba_tm_req *)fib->hw_fib_va;
820 memset(tmf, 0, sizeof(*tmf));
821 tmf->tmf = HBA_TMF_LUN_RESET;
822 tmf->it_nexus = info->rmw_nexus;
823 int_to_scsilun(tmf_lun, (struct scsi_lun *)tmf->lun);
825 address = (u64)fib->hw_error_pa;
826 tmf->error_ptr_hi = cpu_to_le32
827 ((u32)(address >> 32));
828 tmf->error_ptr_lo = cpu_to_le32
829 ((u32)(address & 0xffffffff));
830 tmf->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
831 fib->hbacmd_size = sizeof(*tmf);
833 return HBA_IU_TYPE_SCSI_TM_REQ;
836 static u8 aac_eh_tmf_hard_reset_fib(struct aac_hba_map_info *info,
839 struct aac_hba_reset_req *rst;
842 /* already tried, start a hard reset now */
843 rst = (struct aac_hba_reset_req *)fib->hw_fib_va;
844 memset(rst, 0, sizeof(*rst));
845 rst->it_nexus = info->rmw_nexus;
847 address = (u64)fib->hw_error_pa;
848 rst->error_ptr_hi = cpu_to_le32((u32)(address >> 32));
849 rst->error_ptr_lo = cpu_to_le32((u32)(address & 0xffffffff));
850 rst->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
851 fib->hbacmd_size = sizeof(*rst);
853 return HBA_IU_TYPE_SATA_REQ;
856 void aac_tmf_callback(void *context, struct fib *fibptr)
858 struct aac_hba_resp *err =
859 &((struct aac_native_hba *)fibptr->hw_fib_va)->resp.err;
860 struct aac_hba_map_info *info = context;
863 switch (err->service_response) {
864 case HBA_RESP_SVCRES_TMF_REJECTED:
867 case HBA_RESP_SVCRES_TMF_LUN_INVALID:
870 case HBA_RESP_SVCRES_TMF_COMPLETE:
871 case HBA_RESP_SVCRES_TMF_SUCCEEDED:
878 aac_fib_complete(fibptr);
880 info->reset_state = res;
884 * aac_eh_dev_reset - Device reset command handling
885 * @scsi_cmd: SCSI command block causing the reset
888 static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
890 struct scsi_device * dev = cmd->device;
891 struct Scsi_Host * host = dev->host;
892 struct aac_dev * aac = (struct aac_dev *)host->hostdata;
893 struct aac_hba_map_info *info;
901 bus = aac_logical_to_phys(scmd_channel(cmd));
904 if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS)
907 info = &aac->hba_map[bus][cid];
909 if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
910 !(info->reset_state > 0)))
913 pr_err("%s: Host device reset request. SCSI hang ?\n",
916 fib = aac_fib_alloc(aac);
920 /* start a HBA_TMF_LUN_RESET TMF request */
921 command = aac_eh_tmf_lun_reset_fib(info, fib, dev->lun);
923 info->reset_state = 1;
925 status = aac_hba_send(command, fib,
926 (fib_callback) aac_tmf_callback,
928 if (status != -EINPROGRESS) {
929 info->reset_state = 0;
930 aac_fib_complete(fib);
934 /* Wait up to 15 seconds for completion */
935 for (count = 0; count < 15; ++count) {
936 if (info->reset_state == 0) {
937 ret = info->reset_state == 0 ? SUCCESS : FAILED;
947 * aac_eh_target_reset - Target reset command handling
948 * @scsi_cmd: SCSI command block causing the reset
951 static int aac_eh_target_reset(struct scsi_cmnd *cmd)
953 struct scsi_device * dev = cmd->device;
954 struct Scsi_Host * host = dev->host;
955 struct aac_dev * aac = (struct aac_dev *)host->hostdata;
956 struct aac_hba_map_info *info;
964 bus = aac_logical_to_phys(scmd_channel(cmd));
967 if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS)
970 info = &aac->hba_map[bus][cid];
972 if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
973 !(info->reset_state > 0)))
976 pr_err("%s: Host target reset request. SCSI hang ?\n",
979 fib = aac_fib_alloc(aac);
984 /* already tried, start a hard reset now */
985 command = aac_eh_tmf_hard_reset_fib(info, fib);
987 info->reset_state = 2;
989 status = aac_hba_send(command, fib,
990 (fib_callback) aac_tmf_callback,
993 if (status != -EINPROGRESS) {
994 info->reset_state = 0;
995 aac_fib_complete(fib);
1000 /* Wait up to 15 seconds for completion */
1001 for (count = 0; count < 15; ++count) {
1002 if (info->reset_state <= 0) {
1003 ret = info->reset_state == 0 ? SUCCESS : FAILED;
1013 * aac_eh_bus_reset - Bus reset command handling
1014 * @scsi_cmd: SCSI command block causing the reset
1017 static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
1019 struct scsi_device * dev = cmd->device;
1020 struct Scsi_Host * host = dev->host;
1021 struct aac_dev * aac = (struct aac_dev *)host->hostdata;
1027 cmd_bus = aac_logical_to_phys(scmd_channel(cmd));
1028 /* Mark the assoc. FIB to not complete, eh handler does this */
1029 for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
1030 struct fib *fib = &aac->fibs[count];
1032 if (fib->hw_fib_va->header.XferState &&
1033 (fib->flags & FIB_CONTEXT_FLAG) &&
1034 (fib->flags & FIB_CONTEXT_FLAG_SCSI_CMD)) {
1035 struct aac_hba_map_info *info;
1038 cmd = (struct scsi_cmnd *)fib->callback_data;
1039 bus = aac_logical_to_phys(scmd_channel(cmd));
1043 info = &aac->hba_map[bus][cid];
1044 if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
1045 info->devtype != AAC_DEVTYPE_NATIVE_RAW) {
1046 fib->flags |= FIB_CONTEXT_FLAG_EH_RESET;
1047 cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
1052 pr_err("%s: Host bus reset request. SCSI hang ?\n", AAC_DRIVERNAME);
1055 * Check the health of the controller
1057 status = aac_adapter_check_health(aac);
1059 dev_err(&aac->pdev->dev, "Adapter health - %d\n", status);
1061 count = get_num_of_incomplete_fibs(aac);
1062 return (count == 0) ? SUCCESS : FAILED;
1066 * aac_eh_host_reset - Host reset command handling
1067 * @scsi_cmd: SCSI command block causing the reset
1070 int aac_eh_host_reset(struct scsi_cmnd *cmd)
1072 struct scsi_device * dev = cmd->device;
1073 struct Scsi_Host * host = dev->host;
1074 struct aac_dev * aac = (struct aac_dev *)host->hostdata;
1076 __le32 supported_options2 = 0;
1078 bool is_ignore_reset;
1079 bool is_doorbell_reset;
1082 * Check if reset is supported by the firmware
1084 supported_options2 = aac->supplement_adapter_info.supported_options2;
1085 is_mu_reset = supported_options2 & AAC_OPTION_MU_RESET;
1086 is_doorbell_reset = supported_options2 & AAC_OPTION_DOORBELL_RESET;
1087 is_ignore_reset = supported_options2 & AAC_OPTION_IGNORE_RESET;
1089 * This adapter needs a blind reset, only do so for
1090 * Adapters that support a register, instead of a commanded,
1093 if ((is_mu_reset || is_doorbell_reset)
1095 && (aac_check_reset != -1 || !is_ignore_reset)) {
1096 /* Bypass wait for command quiesce */
1097 if (aac_reset_adapter(aac, 2, IOP_HWSOFT_RESET) == 0)
1103 if (ret == SUCCESS) {
1105 struct aac_hba_map_info *info;
1107 for (bus = 0; bus < AAC_MAX_BUSES; bus++) {
1108 for (cid = 0; cid < AAC_MAX_TARGETS; cid++) {
1109 info = &aac->hba_map[bus][cid];
1110 if (info->devtype == AAC_DEVTYPE_NATIVE_RAW)
1111 info->reset_state = 0;
1119 * aac_cfg_open - open a configuration file
1120 * @inode: inode being opened
1121 * @file: file handle attached
1123 * Called when the configuration device is opened. Does the needed
1124 * set up on the handle and then returns
1126 * Bugs: This needs extending to check a given adapter is present
1127 * so we can support hot plugging, and to ref count adapters.
1130 static int aac_cfg_open(struct inode *inode, struct file *file)
1132 struct aac_dev *aac;
1133 unsigned minor_number = iminor(inode);
1136 mutex_lock(&aac_mutex); /* BKL pushdown: nothing else protects this list */
1137 list_for_each_entry(aac, &aac_devices, entry) {
1138 if (aac->id == minor_number) {
1139 file->private_data = aac;
1144 mutex_unlock(&aac_mutex);
1150 * aac_cfg_ioctl - AAC configuration request
1151 * @inode: inode of device
1152 * @file: file handle
1153 * @cmd: ioctl command code
1156 * Handles a configuration ioctl. Currently this involves wrapping it
1157 * up and feeding it into the nasty windowsalike glue layer.
1159 * Bugs: Needs locking against parallel ioctls lower down
1160 * Bugs: Needs to handle hot plugging
1163 static long aac_cfg_ioctl(struct file *file,
1164 unsigned int cmd, unsigned long arg)
1166 struct aac_dev *aac = (struct aac_dev *)file->private_data;
1168 if (!capable(CAP_SYS_RAWIO))
1171 return aac_do_ioctl(aac, cmd, (void __user *)arg);
1174 #ifdef CONFIG_COMPAT
1175 static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long arg)
1179 case FSACTL_MINIPORT_REV_CHECK:
1180 case FSACTL_SENDFIB:
1181 case FSACTL_OPEN_GET_ADAPTER_FIB:
1182 case FSACTL_CLOSE_GET_ADAPTER_FIB:
1183 case FSACTL_SEND_RAW_SRB:
1184 case FSACTL_GET_PCI_INFO:
1185 case FSACTL_QUERY_DISK:
1186 case FSACTL_DELETE_DISK:
1187 case FSACTL_FORCE_DELETE_DISK:
1188 case FSACTL_GET_CONTAINERS:
1189 case FSACTL_SEND_LARGE_FIB:
1190 ret = aac_do_ioctl(dev, cmd, (void __user *)arg);
1193 case FSACTL_GET_NEXT_ADAPTER_FIB: {
1194 struct fib_ioctl __user *f;
1196 f = compat_alloc_user_space(sizeof(*f));
1198 if (clear_user(f, sizeof(*f)))
1200 if (copy_in_user(f, (void __user *)arg, sizeof(struct fib_ioctl) - sizeof(u32)))
1203 ret = aac_do_ioctl(dev, cmd, f);
1214 static int aac_compat_ioctl(struct scsi_device *sdev, unsigned int cmd,
1217 struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
1218 if (!capable(CAP_SYS_RAWIO))
1220 return aac_compat_do_ioctl(dev, cmd, (unsigned long)arg);
1223 static long aac_compat_cfg_ioctl(struct file *file, unsigned cmd, unsigned long arg)
1225 if (!capable(CAP_SYS_RAWIO))
1227 return aac_compat_do_ioctl(file->private_data, cmd, arg);
1231 static ssize_t aac_show_model(struct device *device,
1232 struct device_attribute *attr, char *buf)
1234 struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
1237 if (dev->supplement_adapter_info.adapter_type_text[0]) {
1238 char *cp = dev->supplement_adapter_info.adapter_type_text;
1239 while (*cp && *cp != ' ')
1243 len = snprintf(buf, PAGE_SIZE, "%s\n", cp);
1245 len = snprintf(buf, PAGE_SIZE, "%s\n",
1246 aac_drivers[dev->cardtype].model);
1250 static ssize_t aac_show_vendor(struct device *device,
1251 struct device_attribute *attr, char *buf)
1253 struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
1254 struct aac_supplement_adapter_info *sup_adap_info;
1257 sup_adap_info = &dev->supplement_adapter_info;
1258 if (sup_adap_info->adapter_type_text[0]) {
1259 char *cp = sup_adap_info->adapter_type_text;
1260 while (*cp && *cp != ' ')
1262 len = snprintf(buf, PAGE_SIZE, "%.*s\n",
1263 (int)(cp - (char *)sup_adap_info->adapter_type_text),
1264 sup_adap_info->adapter_type_text);
1266 len = snprintf(buf, PAGE_SIZE, "%s\n",
1267 aac_drivers[dev->cardtype].vname);
1271 static ssize_t aac_show_flags(struct device *cdev,
1272 struct device_attribute *attr, char *buf)
1275 struct aac_dev *dev = (struct aac_dev*)class_to_shost(cdev)->hostdata;
1277 if (nblank(dprintk(x)))
1278 len = snprintf(buf, PAGE_SIZE, "dprintk\n");
1279 #ifdef AAC_DETAILED_STATUS_INFO
1280 len += snprintf(buf + len, PAGE_SIZE - len,
1281 "AAC_DETAILED_STATUS_INFO\n");
1283 if (dev->raw_io_interface && dev->raw_io_64)
1284 len += snprintf(buf + len, PAGE_SIZE - len,
1285 "SAI_READ_CAPACITY_16\n");
1287 len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n");
1288 if (dev->supplement_adapter_info.supported_options2 &
1289 AAC_OPTION_POWER_MANAGEMENT)
1290 len += snprintf(buf + len, PAGE_SIZE - len,
1291 "SUPPORTED_POWER_MANAGEMENT\n");
1293 len += snprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n");
1297 static ssize_t aac_show_kernel_version(struct device *device,
1298 struct device_attribute *attr,
1301 struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
1304 tmp = le32_to_cpu(dev->adapter_info.kernelrev);
1305 len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n",
1306 tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff,
1307 le32_to_cpu(dev->adapter_info.kernelbuild));
1311 static ssize_t aac_show_monitor_version(struct device *device,
1312 struct device_attribute *attr,
1315 struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
1318 tmp = le32_to_cpu(dev->adapter_info.monitorrev);
1319 len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n",
1320 tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff,
1321 le32_to_cpu(dev->adapter_info.monitorbuild));
1325 static ssize_t aac_show_bios_version(struct device *device,
1326 struct device_attribute *attr,
1329 struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
1332 tmp = le32_to_cpu(dev->adapter_info.biosrev);
1333 len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n",
1334 tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff,
1335 le32_to_cpu(dev->adapter_info.biosbuild));
1339 static ssize_t aac_show_driver_version(struct device *device,
1340 struct device_attribute *attr,
1343 return snprintf(buf, PAGE_SIZE, "%s\n", aac_driver_version);
1346 static ssize_t aac_show_serial_number(struct device *device,
1347 struct device_attribute *attr, char *buf)
1349 struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
1352 if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0)
1353 len = snprintf(buf, 16, "%06X\n",
1354 le32_to_cpu(dev->adapter_info.serial[0]));
1356 !memcmp(&dev->supplement_adapter_info.mfg_pcba_serial_no[
1357 sizeof(dev->supplement_adapter_info.mfg_pcba_serial_no)-len],
1359 len = snprintf(buf, 16, "%.*s\n",
1360 (int)sizeof(dev->supplement_adapter_info.mfg_pcba_serial_no),
1361 dev->supplement_adapter_info.mfg_pcba_serial_no);
1363 return min(len, 16);
1366 static ssize_t aac_show_max_channel(struct device *device,
1367 struct device_attribute *attr, char *buf)
1369 return snprintf(buf, PAGE_SIZE, "%d\n",
1370 class_to_shost(device)->max_channel);
1373 static ssize_t aac_show_max_id(struct device *device,
1374 struct device_attribute *attr, char *buf)
1376 return snprintf(buf, PAGE_SIZE, "%d\n",
1377 class_to_shost(device)->max_id);
1380 static ssize_t aac_store_reset_adapter(struct device *device,
1381 struct device_attribute *attr,
1382 const char *buf, size_t count)
1384 int retval = -EACCES;
1386 if (!capable(CAP_SYS_ADMIN))
1389 retval = aac_reset_adapter(shost_priv(class_to_shost(device)),
1390 buf[0] == '!', IOP_HWSOFT_RESET);
1397 static ssize_t aac_show_reset_adapter(struct device *device,
1398 struct device_attribute *attr,
1401 struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata;
1404 tmp = aac_adapter_check_health(dev);
1405 if ((tmp == 0) && dev->in_reset)
1407 len = snprintf(buf, PAGE_SIZE, "0x%x\n", tmp);
1411 static struct device_attribute aac_model = {
1416 .show = aac_show_model,
1418 static struct device_attribute aac_vendor = {
1423 .show = aac_show_vendor,
1425 static struct device_attribute aac_flags = {
1430 .show = aac_show_flags,
1432 static struct device_attribute aac_kernel_version = {
1434 .name = "hba_kernel_version",
1437 .show = aac_show_kernel_version,
1439 static struct device_attribute aac_monitor_version = {
1441 .name = "hba_monitor_version",
1444 .show = aac_show_monitor_version,
1446 static struct device_attribute aac_bios_version = {
1448 .name = "hba_bios_version",
1451 .show = aac_show_bios_version,
1453 static struct device_attribute aac_lld_version = {
1455 .name = "driver_version",
1458 .show = aac_show_driver_version,
1460 static struct device_attribute aac_serial_number = {
1462 .name = "serial_number",
1465 .show = aac_show_serial_number,
1467 static struct device_attribute aac_max_channel = {
1469 .name = "max_channel",
1472 .show = aac_show_max_channel,
1474 static struct device_attribute aac_max_id = {
1479 .show = aac_show_max_id,
1481 static struct device_attribute aac_reset = {
1483 .name = "reset_host",
1484 .mode = S_IWUSR|S_IRUGO,
1486 .store = aac_store_reset_adapter,
1487 .show = aac_show_reset_adapter,
1490 static struct device_attribute *aac_attrs[] = {
1494 &aac_kernel_version,
1495 &aac_monitor_version,
1505 ssize_t aac_get_serial_number(struct device *device, char *buf)
1507 return aac_show_serial_number(device, &aac_serial_number, buf);
1510 static const struct file_operations aac_cfg_fops = {
1511 .owner = THIS_MODULE,
1512 .unlocked_ioctl = aac_cfg_ioctl,
1513 #ifdef CONFIG_COMPAT
1514 .compat_ioctl = aac_compat_cfg_ioctl,
1516 .open = aac_cfg_open,
1517 .llseek = noop_llseek,
1520 static struct scsi_host_template aac_driver_template = {
1521 .module = THIS_MODULE,
1523 .proc_name = AAC_DRIVERNAME,
1526 #ifdef CONFIG_COMPAT
1527 .compat_ioctl = aac_compat_ioctl,
1529 .queuecommand = aac_queuecommand,
1530 .bios_param = aac_biosparm,
1531 .shost_attrs = aac_attrs,
1532 .slave_configure = aac_slave_configure,
1533 .change_queue_depth = aac_change_queue_depth,
1534 .sdev_attrs = aac_dev_attrs,
1535 .eh_abort_handler = aac_eh_abort,
1536 .eh_device_reset_handler = aac_eh_dev_reset,
1537 .eh_target_reset_handler = aac_eh_target_reset,
1538 .eh_bus_reset_handler = aac_eh_bus_reset,
1539 .eh_host_reset_handler = aac_eh_host_reset,
1540 .can_queue = AAC_NUM_IO_FIB,
1541 .this_id = MAXIMUM_NUM_CONTAINERS,
1544 #if (AAC_NUM_IO_FIB > 256)
1547 .cmd_per_lun = AAC_NUM_IO_FIB,
1553 static void __aac_shutdown(struct aac_dev * aac)
1557 mutex_lock(&aac->ioctl_mutex);
1558 aac->adapter_shutdown = 1;
1559 mutex_unlock(&aac->ioctl_mutex);
1561 if (aac->aif_thread) {
1563 /* Clear out events first */
1564 for (i = 0; i < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); i++) {
1565 struct fib *fib = &aac->fibs[i];
1566 if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
1567 (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected)))
1568 complete(&fib->event_wait);
1570 kthread_stop(aac->thread);
1574 aac_send_shutdown(aac);
1576 aac_adapter_disable_int(aac);
1578 if (aac_is_src(aac)) {
1579 if (aac->max_msix > 1) {
1580 for (i = 0; i < aac->max_msix; i++) {
1581 free_irq(pci_irq_vector(aac->pdev, i),
1582 &(aac->aac_msix[i]));
1585 free_irq(aac->pdev->irq,
1586 &(aac->aac_msix[0]));
1589 free_irq(aac->pdev->irq, aac);
1592 pci_disable_msi(aac->pdev);
1593 else if (aac->max_msix > 1)
1594 pci_disable_msix(aac->pdev);
1596 static void aac_init_char(void)
1598 aac_cfg_major = register_chrdev(0, "aac", &aac_cfg_fops);
1599 if (aac_cfg_major < 0) {
1600 pr_err("aacraid: unable to register \"aac\" device.\n");
1604 static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
1606 unsigned index = id->driver_data;
1607 struct Scsi_Host *shost;
1608 struct aac_dev *aac;
1609 struct list_head *insert = &aac_devices;
1614 extern int aac_sync_mode;
1617 * Only series 7 needs freset.
1619 if (pdev->device == PMC_DEVICE_S7)
1620 pdev->needs_freset = 1;
1622 list_for_each_entry(aac, &aac_devices, entry) {
1623 if (aac->id > unique_id)
1625 insert = &aac->entry;
1629 pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
1630 PCIE_LINK_STATE_CLKPM);
1632 error = pci_enable_device(pdev);
1636 if (!(aac_drivers[index].quirks & AAC_QUIRK_SRC)) {
1637 error = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
1639 dev_err(&pdev->dev, "PCI 32 BIT dma mask set failed");
1640 goto out_disable_pdev;
1645 * If the quirk31 bit is set, the adapter needs adapter
1646 * to driver communication memory to be allocated below 2gig
1648 if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) {
1649 dmamask = DMA_BIT_MASK(31);
1652 dmamask = DMA_BIT_MASK(32);
1656 error = pci_set_consistent_dma_mask(pdev, dmamask);
1658 dev_err(&pdev->dev, "PCI %d B consistent dma mask set failed\n"
1660 goto out_disable_pdev;
1663 pci_set_master(pdev);
1665 shost = scsi_host_alloc(&aac_driver_template, sizeof(struct aac_dev));
1668 goto out_disable_pdev;
1671 shost->irq = pdev->irq;
1672 shost->unique_id = unique_id;
1673 shost->max_cmd_len = 16;
1674 shost->use_cmd_list = 1;
1676 if (aac_cfg_major == AAC_CHARDEV_NEEDS_REINIT)
1679 aac = (struct aac_dev *)shost->hostdata;
1680 aac->base_start = pci_resource_start(pdev, 0);
1681 aac->scsi_host_ptr = shost;
1683 aac->name = aac_driver_template.name;
1684 aac->id = shost->unique_id;
1685 aac->cardtype = index;
1686 INIT_LIST_HEAD(&aac->entry);
1688 if (aac_reset_devices || reset_devices)
1689 aac->init_reset = true;
1691 aac->fibs = kcalloc(shost->can_queue + AAC_NUM_MGT_FIB,
1699 spin_lock_init(&aac->fib_lock);
1701 mutex_init(&aac->ioctl_mutex);
1702 mutex_init(&aac->scan_mutex);
1704 INIT_DELAYED_WORK(&aac->safw_rescan_work, aac_safw_rescan_worker);
1706 * Map in the registers from the adapter.
1708 aac->base_size = AAC_MIN_FOOTPRINT_SIZE;
1709 if ((*aac_drivers[index].init)(aac)) {
1714 if (aac->sync_mode) {
1716 printk(KERN_INFO "%s%d: Sync. mode enforced "
1717 "by driver parameter. This will cause "
1718 "a significant performance decrease!\n",
1722 printk(KERN_INFO "%s%d: Async. mode not supported "
1723 "by current driver, sync. mode enforced."
1724 "\nPlease update driver to get full performance.\n",
1730 * Start any kernel threads needed
1732 aac->thread = kthread_run(aac_command_thread, aac, AAC_DRIVERNAME);
1733 if (IS_ERR(aac->thread)) {
1734 printk(KERN_ERR "aacraid: Unable to create command thread.\n");
1735 error = PTR_ERR(aac->thread);
1740 aac->maximum_num_channels = aac_drivers[index].channels;
1741 error = aac_get_adapter_info(aac);
1746 * Lets override negotiations and drop the maximum SG limit to 34
1748 if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) &&
1749 (shost->sg_tablesize > 34)) {
1750 shost->sg_tablesize = 34;
1751 shost->max_sectors = (shost->sg_tablesize * 8) + 112;
1754 if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
1755 (shost->sg_tablesize > 17)) {
1756 shost->sg_tablesize = 17;
1757 shost->max_sectors = (shost->sg_tablesize * 8) + 112;
1760 if (aac->adapter_info.options & AAC_OPT_NEW_COMM)
1761 shost->max_segment_size = shost->max_sectors << 9;
1763 shost->max_segment_size = 65536;
1766 * Firmware printf works only with older firmware.
1768 if (aac_drivers[index].quirks & AAC_QUIRK_34SG)
1769 aac->printf_enabled = 1;
1771 aac->printf_enabled = 0;
1774 * max channel will be the physical channels plus 1 virtual channel
1775 * all containers are on the virtual channel 0 (CONTAINER_CHANNEL)
1776 * physical channels are address by their actual physical number+1
1778 if (aac->nondasd_support || expose_physicals || aac->jbod)
1779 shost->max_channel = aac->maximum_num_channels;
1781 shost->max_channel = 0;
1783 aac_get_config_status(aac, 0);
1784 aac_get_containers(aac);
1785 list_add(&aac->entry, insert);
1787 shost->max_id = aac->maximum_num_containers;
1788 if (shost->max_id < aac->maximum_num_physicals)
1789 shost->max_id = aac->maximum_num_physicals;
1790 if (shost->max_id < MAXIMUM_NUM_CONTAINERS)
1791 shost->max_id = MAXIMUM_NUM_CONTAINERS;
1793 shost->this_id = shost->max_id;
1795 if (!aac->sa_firmware && aac_drivers[index].quirks & AAC_QUIRK_SRC)
1796 aac_intr_normal(aac, 0, 2, 0, NULL);
1799 * dmb - we may need to move the setting of these parms somewhere else once
1800 * we get a fib that can report the actual numbers
1802 shost->max_lun = AAC_MAX_LUN;
1804 pci_set_drvdata(pdev, shost);
1806 error = scsi_add_host(shost, &pdev->dev);
1812 pci_enable_pcie_error_reporting(pdev);
1813 pci_save_state(pdev);
1818 __aac_shutdown(aac);
1820 aac_fib_map_free(aac);
1822 dma_free_coherent(&aac->pdev->dev, aac->comm_size,
1823 aac->comm_addr, aac->comm_phys);
1825 aac_adapter_ioremap(aac, 0);
1827 kfree(aac->fsa_dev);
1829 scsi_host_put(shost);
1831 pci_disable_device(pdev);
1836 static void aac_release_resources(struct aac_dev *aac)
1838 aac_adapter_disable_int(aac);
1842 static int aac_acquire_resources(struct aac_dev *dev)
1844 unsigned long status;
1846 * First clear out all interrupts. Then enable the one's that we
1849 while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING)
1850 || status == 0xffffffff)
1853 aac_adapter_disable_int(dev);
1854 aac_adapter_enable_int(dev);
1857 if (aac_is_src(dev))
1858 aac_define_int_mode(dev);
1860 if (dev->msi_enabled)
1861 aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
1863 if (aac_acquire_irq(dev))
1866 aac_adapter_enable_int(dev);
1868 /*max msix may change after EEH
1869 * Re-assign vectors to fibs
1871 aac_fib_vector_assign(dev);
1873 if (!dev->sync_mode) {
1874 /* After EEH recovery or suspend resume, max_msix count
1875 * may change, therefore updating in init as well.
1877 dev->init->r7.no_of_msix_vectors = cpu_to_le32(dev->max_msix);
1878 aac_adapter_start(dev);
1887 #if (defined(CONFIG_PM))
1888 static int aac_suspend(struct pci_dev *pdev, pm_message_t state)
1891 struct Scsi_Host *shost = pci_get_drvdata(pdev);
1892 struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
1894 scsi_block_requests(shost);
1895 aac_cancel_safw_rescan_worker(aac);
1896 aac_send_shutdown(aac);
1898 aac_release_resources(aac);
1900 pci_set_drvdata(pdev, shost);
1901 pci_save_state(pdev);
1902 pci_disable_device(pdev);
1903 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1908 static int aac_resume(struct pci_dev *pdev)
1910 struct Scsi_Host *shost = pci_get_drvdata(pdev);
1911 struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
1914 pci_set_power_state(pdev, PCI_D0);
1915 pci_enable_wake(pdev, PCI_D0, 0);
1916 pci_restore_state(pdev);
1917 r = pci_enable_device(pdev);
1922 pci_set_master(pdev);
1923 if (aac_acquire_resources(aac))
1926 * reset this flag to unblock ioctl() as it was set at
1927 * aac_send_shutdown() to block ioctls from upperlayer
1929 aac->adapter_shutdown = 0;
1930 scsi_unblock_requests(shost);
1935 printk(KERN_INFO "%s%d: resume failed.\n", aac->name, aac->id);
1936 scsi_host_put(shost);
1937 pci_disable_device(pdev);
1942 static void aac_shutdown(struct pci_dev *dev)
1944 struct Scsi_Host *shost = pci_get_drvdata(dev);
1945 scsi_block_requests(shost);
1946 __aac_shutdown((struct aac_dev *)shost->hostdata);
1949 static void aac_remove_one(struct pci_dev *pdev)
1951 struct Scsi_Host *shost = pci_get_drvdata(pdev);
1952 struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
1954 aac_cancel_safw_rescan_worker(aac);
1955 scsi_remove_host(shost);
1957 __aac_shutdown(aac);
1958 aac_fib_map_free(aac);
1959 dma_free_coherent(&aac->pdev->dev, aac->comm_size, aac->comm_addr,
1963 aac_adapter_ioremap(aac, 0);
1966 kfree(aac->fsa_dev);
1968 list_del(&aac->entry);
1969 scsi_host_put(shost);
1970 pci_disable_device(pdev);
1971 if (list_empty(&aac_devices)) {
1972 unregister_chrdev(aac_cfg_major, "aac");
1973 aac_cfg_major = AAC_CHARDEV_NEEDS_REINIT;
1977 static void aac_flush_ios(struct aac_dev *aac)
1980 struct scsi_cmnd *cmd;
1982 for (i = 0; i < aac->scsi_host_ptr->can_queue; i++) {
1983 cmd = (struct scsi_cmnd *)aac->fibs[i].callback_data;
1984 if (cmd && (cmd->SCp.phase == AAC_OWNER_FIRMWARE)) {
1985 scsi_dma_unmap(cmd);
1987 if (aac->handle_pci_error)
1988 cmd->result = DID_NO_CONNECT << 16;
1990 cmd->result = DID_RESET << 16;
1992 cmd->scsi_done(cmd);
1997 static pci_ers_result_t aac_pci_error_detected(struct pci_dev *pdev,
1998 enum pci_channel_state error)
2000 struct Scsi_Host *shost = pci_get_drvdata(pdev);
2001 struct aac_dev *aac = shost_priv(shost);
2003 dev_err(&pdev->dev, "aacraid: PCI error detected %x\n", error);
2006 case pci_channel_io_normal:
2007 return PCI_ERS_RESULT_CAN_RECOVER;
2008 case pci_channel_io_frozen:
2009 aac->handle_pci_error = 1;
2011 scsi_block_requests(aac->scsi_host_ptr);
2012 aac_cancel_safw_rescan_worker(aac);
2014 aac_release_resources(aac);
2016 pci_disable_pcie_error_reporting(pdev);
2017 aac_adapter_ioremap(aac, 0);
2019 return PCI_ERS_RESULT_NEED_RESET;
2020 case pci_channel_io_perm_failure:
2021 aac->handle_pci_error = 1;
2024 return PCI_ERS_RESULT_DISCONNECT;
2027 return PCI_ERS_RESULT_NEED_RESET;
2030 static pci_ers_result_t aac_pci_mmio_enabled(struct pci_dev *pdev)
2032 dev_err(&pdev->dev, "aacraid: PCI error - mmio enabled\n");
2033 return PCI_ERS_RESULT_NEED_RESET;
2036 static pci_ers_result_t aac_pci_slot_reset(struct pci_dev *pdev)
2038 dev_err(&pdev->dev, "aacraid: PCI error - slot reset\n");
2039 pci_restore_state(pdev);
2040 if (pci_enable_device(pdev)) {
2041 dev_warn(&pdev->dev,
2042 "aacraid: failed to enable slave\n");
2046 pci_set_master(pdev);
2048 if (pci_enable_device_mem(pdev)) {
2049 dev_err(&pdev->dev, "pci_enable_device_mem failed\n");
2053 return PCI_ERS_RESULT_RECOVERED;
2056 dev_err(&pdev->dev, "aacraid: PCI error - slot reset failed\n");
2057 return PCI_ERS_RESULT_DISCONNECT;
2061 static void aac_pci_resume(struct pci_dev *pdev)
2063 struct Scsi_Host *shost = pci_get_drvdata(pdev);
2064 struct scsi_device *sdev = NULL;
2065 struct aac_dev *aac = (struct aac_dev *)shost_priv(shost);
2067 if (aac_adapter_ioremap(aac, aac->base_size)) {
2069 dev_err(&pdev->dev, "aacraid: ioremap failed\n");
2070 /* remap failed, go back ... */
2071 aac->comm_interface = AAC_COMM_PRODUCER;
2072 if (aac_adapter_ioremap(aac, AAC_MIN_FOOTPRINT_SIZE)) {
2073 dev_warn(&pdev->dev,
2074 "aacraid: unable to map adapter.\n");
2082 aac_acquire_resources(aac);
2085 * reset this flag to unblock ioctl() as it was set
2086 * at aac_send_shutdown() to block ioctls from upperlayer
2088 aac->adapter_shutdown = 0;
2089 aac->handle_pci_error = 0;
2091 shost_for_each_device(sdev, shost)
2092 if (sdev->sdev_state == SDEV_OFFLINE)
2093 sdev->sdev_state = SDEV_RUNNING;
2094 scsi_unblock_requests(aac->scsi_host_ptr);
2096 pci_save_state(pdev);
2098 dev_err(&pdev->dev, "aacraid: PCI error - resume\n");
2101 static struct pci_error_handlers aac_pci_err_handler = {
2102 .error_detected = aac_pci_error_detected,
2103 .mmio_enabled = aac_pci_mmio_enabled,
2104 .slot_reset = aac_pci_slot_reset,
2105 .resume = aac_pci_resume,
2108 static struct pci_driver aac_pci_driver = {
2109 .name = AAC_DRIVERNAME,
2110 .id_table = aac_pci_tbl,
2111 .probe = aac_probe_one,
2112 .remove = aac_remove_one,
2113 #if (defined(CONFIG_PM))
2114 .suspend = aac_suspend,
2115 .resume = aac_resume,
2117 .shutdown = aac_shutdown,
2118 .err_handler = &aac_pci_err_handler,
2121 static int __init aac_init(void)
2125 printk(KERN_INFO "Adaptec %s driver %s\n",
2126 AAC_DRIVERNAME, aac_driver_version);
2128 error = pci_register_driver(&aac_pci_driver);
2138 static void __exit aac_exit(void)
2140 if (aac_cfg_major > -1)
2141 unregister_chrdev(aac_cfg_major, "aac");
2142 pci_unregister_driver(&aac_pci_driver);
2145 module_init(aac_init);
2146 module_exit(aac_exit);