1 # SPDX-License-Identifier: GPL-2.0-only
2 menu "Remoteproc drivers"
5 bool "Support for Remote Processor subsystem"
10 select WANT_DEV_COREDUMP
12 Support for remote processors (such as DSP coprocessors). These
13 are mainly used on embedded systems.
18 tristate "IMX6/7 remoteproc support"
21 Say y here to support iMX's remote processors (Cortex M4
22 on iMX7D) via the remote processor framework.
24 It's safe to say N here.
26 config OMAP_REMOTEPROC
27 tristate "OMAP remoteproc support"
28 depends on ARCH_OMAP4 || SOC_OMAP5
33 Say y here to support OMAP's remote processors (dual M3
34 and DSP on OMAP4) via the remote processor framework.
36 Currently only supported on OMAP4.
38 Usually you want to say Y here, in order to enable multimedia
39 use-cases to run on your platform (multimedia codecs are
40 offloaded to remote DSP processors using this framework).
42 It's safe to say N here if you're not interested in multimedia
43 offloading or just want a bare minimum kernel.
46 tristate "AMx3xx Wakeup M3 remoteproc support"
47 depends on SOC_AM33XX || SOC_AM43XX
49 Say y here to support Wakeup M3 remote processor on TI AM33xx
50 and AM43xx family of SoCs.
52 Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
53 for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
54 firmware onto these remote processors.
57 config DA8XX_REMOTEPROC
58 tristate "DA8xx/OMAP-L13x remoteproc support"
59 depends on ARCH_DAVINCI_DA8XX
62 Say y here to support DA8xx/OMAP-L13x remote processors via the
63 remote processor framework.
65 You want to say y here in order to enable AMP
66 use-cases to run on your platform (multimedia codecs are
67 offloaded to remote DSP processors using this framework).
69 This module controls the name of the firmware file that gets
70 loaded on the DSP. This file must reside in the /lib/firmware
71 directory. It can be specified via the module parameter
72 da8xx_fw_name=<filename>, and if not specified will default to
75 It's safe to say n here if you're not interested in multimedia
78 config KEYSTONE_REMOTEPROC
79 tristate "Keystone Remoteproc support"
80 depends on ARCH_KEYSTONE
82 Say Y here here to support Keystone remote processors (DSP)
83 via the remote processor framework.
85 It's safe to say N here if you're not interested in the Keystone
86 DSPs or just want to use a bare minimum kernel.
88 config QCOM_RPROC_COMMON
91 config QCOM_Q6V5_COMMON
97 tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader"
98 depends on OF && ARCH_QCOM
100 depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
101 depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
102 depends on QCOM_SYSMON || QCOM_SYSMON=n
104 select QCOM_MDT_LOADER
105 select QCOM_Q6V5_COMMON
106 select QCOM_RPROC_COMMON
108 Say y here to support the Peripheral Image Loader
109 for the Qualcomm Technology Inc. ADSP remote processors.
112 tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
113 depends on OF && ARCH_QCOM
115 depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
116 depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
117 depends on QCOM_SYSMON || QCOM_SYSMON=n
119 select QCOM_MDT_LOADER
120 select QCOM_Q6V5_COMMON
121 select QCOM_RPROC_COMMON
124 Say y here to support the Qualcomm self-authenticating modem
125 subsystem based on Hexagon V5.
128 tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
129 depends on OF && ARCH_QCOM
131 depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
132 depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
133 depends on QCOM_SYSMON || QCOM_SYSMON=n
135 select QCOM_MDT_LOADER
136 select QCOM_Q6V5_COMMON
137 select QCOM_RPROC_COMMON
140 Say y here to support the TrustZone based Peripherial Image Loader
141 for the Qualcomm Hexagon v5 based remote processors. This is commonly
142 used to control subsystems such as ADSP, Compute and Sensor.
144 config QCOM_Q6V5_WCSS
145 tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
146 depends on OF && ARCH_QCOM
148 depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
149 depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
150 depends on QCOM_SYSMON || QCOM_SYSMON=n
152 select QCOM_MDT_LOADER
153 select QCOM_Q6V5_COMMON
154 select QCOM_RPROC_COMMON
157 Say y here to support the Qualcomm Peripheral Image Loader for the
158 Hexagon V5 based WCSS remote processors.
161 tristate "Qualcomm sysmon driver"
165 select QCOM_QMI_HELPERS
167 The sysmon driver implements a sysmon QMI client and a handler for
168 the sys_mon SMD and GLINK channel, which are used for graceful
169 shutdown, retrieving failure information and propagating information
170 about other subsystems being shut down.
172 Say y here if your system runs firmware on any other subsystems, e.g.
175 config QCOM_WCNSS_PIL
176 tristate "Qualcomm WCNSS Peripheral Image Loader"
177 depends on OF && ARCH_QCOM
178 depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
179 depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
181 depends on QCOM_SYSMON || QCOM_SYSMON=n
182 select QCOM_MDT_LOADER
183 select QCOM_RPROC_COMMON
186 Say y here to support the Peripheral Image Loader for the Qualcomm
187 Wireless Connectivity Subsystem.
190 tristate "ST remoteproc support"
195 Say y here to support ST's adjunct processors via the remote
197 This can be either built-in or a loadable module.
199 config ST_SLIM_REMOTEPROC
203 tristate "STM32 remoteproc support"
204 depends on ARCH_STM32
205 depends on REMOTEPROC
208 Say y here to support STM32 MCU processors via the
209 remote processor framework.
211 You want to say y here in order to enable AMP
212 use-cases to run on your platform (dedicated firmware could be
213 offloaded to remote MCU processors using this framework).
215 This can be either built-in or a loadable module.