1 // SPDX-License-Identifier: GPL-2.0-or-later
3 // core.c -- Voltage/Current Regulator framework.
5 // Copyright 2007, 2008 Wolfson Microelectronics PLC.
6 // Copyright 2008 SlimLogic Ltd.
8 // Author: Liam Girdwood <lrg@slimlogic.co.uk>
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/debugfs.h>
13 #include <linux/device.h>
14 #include <linux/slab.h>
15 #include <linux/async.h>
16 #include <linux/err.h>
17 #include <linux/mutex.h>
18 #include <linux/suspend.h>
19 #include <linux/delay.h>
20 #include <linux/gpio/consumer.h>
22 #include <linux/regmap.h>
23 #include <linux/regulator/of_regulator.h>
24 #include <linux/regulator/consumer.h>
25 #include <linux/regulator/coupler.h>
26 #include <linux/regulator/driver.h>
27 #include <linux/regulator/machine.h>
28 #include <linux/module.h>
30 #define CREATE_TRACE_POINTS
31 #include <trace/events/regulator.h>
36 static DEFINE_WW_CLASS(regulator_ww_class);
37 static DEFINE_MUTEX(regulator_nesting_mutex);
38 static DEFINE_MUTEX(regulator_list_mutex);
39 static LIST_HEAD(regulator_map_list);
40 static LIST_HEAD(regulator_ena_gpio_list);
41 static LIST_HEAD(regulator_supply_alias_list);
42 static LIST_HEAD(regulator_coupler_list);
43 static bool has_full_constraints;
45 static struct dentry *debugfs_root;
48 * struct regulator_map
50 * Used to provide symbolic supply names to devices.
52 struct regulator_map {
53 struct list_head list;
54 const char *dev_name; /* The dev_name() for the consumer */
56 struct regulator_dev *regulator;
60 * struct regulator_enable_gpio
62 * Management for shared enable GPIO pin
64 struct regulator_enable_gpio {
65 struct list_head list;
66 struct gpio_desc *gpiod;
67 u32 enable_count; /* a number of enabled shared GPIO */
68 u32 request_count; /* a number of requested shared GPIO */
72 * struct regulator_supply_alias
74 * Used to map lookups for a supply onto an alternative device.
76 struct regulator_supply_alias {
77 struct list_head list;
78 struct device *src_dev;
79 const char *src_supply;
80 struct device *alias_dev;
81 const char *alias_supply;
84 static int _regulator_is_enabled(struct regulator_dev *rdev);
85 static int _regulator_disable(struct regulator *regulator);
86 static int _regulator_get_current_limit(struct regulator_dev *rdev);
87 static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
88 static int _notifier_call_chain(struct regulator_dev *rdev,
89 unsigned long event, void *data);
90 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
91 int min_uV, int max_uV);
92 static int regulator_balance_voltage(struct regulator_dev *rdev,
93 suspend_state_t state);
94 static struct regulator *create_regulator(struct regulator_dev *rdev,
96 const char *supply_name);
97 static void destroy_regulator(struct regulator *regulator);
98 static void _regulator_put(struct regulator *regulator);
100 const char *rdev_get_name(struct regulator_dev *rdev)
102 if (rdev->constraints && rdev->constraints->name)
103 return rdev->constraints->name;
104 else if (rdev->desc->name)
105 return rdev->desc->name;
109 EXPORT_SYMBOL_GPL(rdev_get_name);
111 static bool have_full_constraints(void)
113 return has_full_constraints || of_have_populated_dt();
116 static bool regulator_ops_is_valid(struct regulator_dev *rdev, int ops)
118 if (!rdev->constraints) {
119 rdev_err(rdev, "no constraints\n");
123 if (rdev->constraints->valid_ops_mask & ops)
130 * regulator_lock_nested - lock a single regulator
131 * @rdev: regulator source
132 * @ww_ctx: w/w mutex acquire context
134 * This function can be called many times by one task on
135 * a single regulator and its mutex will be locked only
136 * once. If a task, which is calling this function is other
137 * than the one, which initially locked the mutex, it will
140 static inline int regulator_lock_nested(struct regulator_dev *rdev,
141 struct ww_acquire_ctx *ww_ctx)
146 mutex_lock(®ulator_nesting_mutex);
148 if (ww_ctx || !ww_mutex_trylock(&rdev->mutex)) {
149 if (rdev->mutex_owner == current)
155 mutex_unlock(®ulator_nesting_mutex);
156 ret = ww_mutex_lock(&rdev->mutex, ww_ctx);
157 mutex_lock(®ulator_nesting_mutex);
163 if (lock && ret != -EDEADLK) {
165 rdev->mutex_owner = current;
168 mutex_unlock(®ulator_nesting_mutex);
174 * regulator_lock - lock a single regulator
175 * @rdev: regulator source
177 * This function can be called many times by one task on
178 * a single regulator and its mutex will be locked only
179 * once. If a task, which is calling this function is other
180 * than the one, which initially locked the mutex, it will
183 static void regulator_lock(struct regulator_dev *rdev)
185 regulator_lock_nested(rdev, NULL);
189 * regulator_unlock - unlock a single regulator
190 * @rdev: regulator_source
192 * This function unlocks the mutex when the
193 * reference counter reaches 0.
195 static void regulator_unlock(struct regulator_dev *rdev)
197 mutex_lock(®ulator_nesting_mutex);
199 if (--rdev->ref_cnt == 0) {
200 rdev->mutex_owner = NULL;
201 ww_mutex_unlock(&rdev->mutex);
204 WARN_ON_ONCE(rdev->ref_cnt < 0);
206 mutex_unlock(®ulator_nesting_mutex);
209 static bool regulator_supply_is_couple(struct regulator_dev *rdev)
211 struct regulator_dev *c_rdev;
214 for (i = 1; i < rdev->coupling_desc.n_coupled; i++) {
215 c_rdev = rdev->coupling_desc.coupled_rdevs[i];
217 if (rdev->supply->rdev == c_rdev)
224 static void regulator_unlock_recursive(struct regulator_dev *rdev,
225 unsigned int n_coupled)
227 struct regulator_dev *c_rdev, *supply_rdev;
228 int i, supply_n_coupled;
230 for (i = n_coupled; i > 0; i--) {
231 c_rdev = rdev->coupling_desc.coupled_rdevs[i - 1];
236 if (c_rdev->supply && !regulator_supply_is_couple(c_rdev)) {
237 supply_rdev = c_rdev->supply->rdev;
238 supply_n_coupled = supply_rdev->coupling_desc.n_coupled;
240 regulator_unlock_recursive(supply_rdev,
244 regulator_unlock(c_rdev);
248 static int regulator_lock_recursive(struct regulator_dev *rdev,
249 struct regulator_dev **new_contended_rdev,
250 struct regulator_dev **old_contended_rdev,
251 struct ww_acquire_ctx *ww_ctx)
253 struct regulator_dev *c_rdev;
256 for (i = 0; i < rdev->coupling_desc.n_coupled; i++) {
257 c_rdev = rdev->coupling_desc.coupled_rdevs[i];
262 if (c_rdev != *old_contended_rdev) {
263 err = regulator_lock_nested(c_rdev, ww_ctx);
265 if (err == -EDEADLK) {
266 *new_contended_rdev = c_rdev;
270 /* shouldn't happen */
271 WARN_ON_ONCE(err != -EALREADY);
274 *old_contended_rdev = NULL;
277 if (c_rdev->supply && !regulator_supply_is_couple(c_rdev)) {
278 err = regulator_lock_recursive(c_rdev->supply->rdev,
283 regulator_unlock(c_rdev);
292 regulator_unlock_recursive(rdev, i);
298 * regulator_unlock_dependent - unlock regulator's suppliers and coupled
300 * @rdev: regulator source
301 * @ww_ctx: w/w mutex acquire context
303 * Unlock all regulators related with rdev by coupling or supplying.
305 static void regulator_unlock_dependent(struct regulator_dev *rdev,
306 struct ww_acquire_ctx *ww_ctx)
308 regulator_unlock_recursive(rdev, rdev->coupling_desc.n_coupled);
309 ww_acquire_fini(ww_ctx);
313 * regulator_lock_dependent - lock regulator's suppliers and coupled regulators
314 * @rdev: regulator source
315 * @ww_ctx: w/w mutex acquire context
317 * This function as a wrapper on regulator_lock_recursive(), which locks
318 * all regulators related with rdev by coupling or supplying.
320 static void regulator_lock_dependent(struct regulator_dev *rdev,
321 struct ww_acquire_ctx *ww_ctx)
323 struct regulator_dev *new_contended_rdev = NULL;
324 struct regulator_dev *old_contended_rdev = NULL;
327 mutex_lock(®ulator_list_mutex);
329 ww_acquire_init(ww_ctx, ®ulator_ww_class);
332 if (new_contended_rdev) {
333 ww_mutex_lock_slow(&new_contended_rdev->mutex, ww_ctx);
334 old_contended_rdev = new_contended_rdev;
335 old_contended_rdev->ref_cnt++;
338 err = regulator_lock_recursive(rdev,
343 if (old_contended_rdev)
344 regulator_unlock(old_contended_rdev);
346 } while (err == -EDEADLK);
348 ww_acquire_done(ww_ctx);
350 mutex_unlock(®ulator_list_mutex);
354 * of_get_child_regulator - get a child regulator device node
355 * based on supply name
356 * @parent: Parent device node
357 * @prop_name: Combination regulator supply name and "-supply"
359 * Traverse all child nodes.
360 * Extract the child regulator device node corresponding to the supply name.
361 * returns the device node corresponding to the regulator if found, else
364 static struct device_node *of_get_child_regulator(struct device_node *parent,
365 const char *prop_name)
367 struct device_node *regnode = NULL;
368 struct device_node *child = NULL;
370 for_each_child_of_node(parent, child) {
371 regnode = of_parse_phandle(child, prop_name, 0);
374 regnode = of_get_child_regulator(child, prop_name);
389 * of_get_regulator - get a regulator device node based on supply name
390 * @dev: Device pointer for the consumer (of regulator) device
391 * @supply: regulator supply name
393 * Extract the regulator device node corresponding to the supply name.
394 * returns the device node corresponding to the regulator if found, else
397 static struct device_node *of_get_regulator(struct device *dev, const char *supply)
399 struct device_node *regnode = NULL;
400 char prop_name[64]; /* 64 is max size of property name */
402 dev_dbg(dev, "Looking up %s-supply from device tree\n", supply);
404 snprintf(prop_name, 64, "%s-supply", supply);
405 regnode = of_parse_phandle(dev->of_node, prop_name, 0);
408 regnode = of_get_child_regulator(dev->of_node, prop_name);
412 dev_dbg(dev, "Looking up %s property in node %pOF failed\n",
413 prop_name, dev->of_node);
419 /* Platform voltage constraint check */
420 int regulator_check_voltage(struct regulator_dev *rdev,
421 int *min_uV, int *max_uV)
423 BUG_ON(*min_uV > *max_uV);
425 if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
426 rdev_err(rdev, "voltage operation not allowed\n");
430 if (*max_uV > rdev->constraints->max_uV)
431 *max_uV = rdev->constraints->max_uV;
432 if (*min_uV < rdev->constraints->min_uV)
433 *min_uV = rdev->constraints->min_uV;
435 if (*min_uV > *max_uV) {
436 rdev_err(rdev, "unsupportable voltage range: %d-%duV\n",
444 /* return 0 if the state is valid */
445 static int regulator_check_states(suspend_state_t state)
447 return (state > PM_SUSPEND_MAX || state == PM_SUSPEND_TO_IDLE);
450 /* Make sure we select a voltage that suits the needs of all
451 * regulator consumers
453 int regulator_check_consumers(struct regulator_dev *rdev,
454 int *min_uV, int *max_uV,
455 suspend_state_t state)
457 struct regulator *regulator;
458 struct regulator_voltage *voltage;
460 list_for_each_entry(regulator, &rdev->consumer_list, list) {
461 voltage = ®ulator->voltage[state];
463 * Assume consumers that didn't say anything are OK
464 * with anything in the constraint range.
466 if (!voltage->min_uV && !voltage->max_uV)
469 if (*max_uV > voltage->max_uV)
470 *max_uV = voltage->max_uV;
471 if (*min_uV < voltage->min_uV)
472 *min_uV = voltage->min_uV;
475 if (*min_uV > *max_uV) {
476 rdev_err(rdev, "Restricting voltage, %u-%uuV\n",
484 /* current constraint check */
485 static int regulator_check_current_limit(struct regulator_dev *rdev,
486 int *min_uA, int *max_uA)
488 BUG_ON(*min_uA > *max_uA);
490 if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_CURRENT)) {
491 rdev_err(rdev, "current operation not allowed\n");
495 if (*max_uA > rdev->constraints->max_uA)
496 *max_uA = rdev->constraints->max_uA;
497 if (*min_uA < rdev->constraints->min_uA)
498 *min_uA = rdev->constraints->min_uA;
500 if (*min_uA > *max_uA) {
501 rdev_err(rdev, "unsupportable current range: %d-%duA\n",
509 /* operating mode constraint check */
510 static int regulator_mode_constrain(struct regulator_dev *rdev,
514 case REGULATOR_MODE_FAST:
515 case REGULATOR_MODE_NORMAL:
516 case REGULATOR_MODE_IDLE:
517 case REGULATOR_MODE_STANDBY:
520 rdev_err(rdev, "invalid mode %x specified\n", *mode);
524 if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_MODE)) {
525 rdev_err(rdev, "mode operation not allowed\n");
529 /* The modes are bitmasks, the most power hungry modes having
530 * the lowest values. If the requested mode isn't supported
534 if (rdev->constraints->valid_modes_mask & *mode)
542 static inline struct regulator_state *
543 regulator_get_suspend_state(struct regulator_dev *rdev, suspend_state_t state)
545 if (rdev->constraints == NULL)
549 case PM_SUSPEND_STANDBY:
550 return &rdev->constraints->state_standby;
552 return &rdev->constraints->state_mem;
554 return &rdev->constraints->state_disk;
560 static const struct regulator_state *
561 regulator_get_suspend_state_check(struct regulator_dev *rdev, suspend_state_t state)
563 const struct regulator_state *rstate;
565 rstate = regulator_get_suspend_state(rdev, state);
569 /* If we have no suspend mode configuration don't set anything;
570 * only warn if the driver implements set_suspend_voltage or
571 * set_suspend_mode callback.
573 if (rstate->enabled != ENABLE_IN_SUSPEND &&
574 rstate->enabled != DISABLE_IN_SUSPEND) {
575 if (rdev->desc->ops->set_suspend_voltage ||
576 rdev->desc->ops->set_suspend_mode)
577 rdev_warn(rdev, "No configuration\n");
584 static ssize_t microvolts_show(struct device *dev,
585 struct device_attribute *attr, char *buf)
587 struct regulator_dev *rdev = dev_get_drvdata(dev);
590 regulator_lock(rdev);
591 uV = regulator_get_voltage_rdev(rdev);
592 regulator_unlock(rdev);
596 return sprintf(buf, "%d\n", uV);
598 static DEVICE_ATTR_RO(microvolts);
600 static ssize_t microamps_show(struct device *dev,
601 struct device_attribute *attr, char *buf)
603 struct regulator_dev *rdev = dev_get_drvdata(dev);
605 return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
607 static DEVICE_ATTR_RO(microamps);
609 static ssize_t name_show(struct device *dev, struct device_attribute *attr,
612 struct regulator_dev *rdev = dev_get_drvdata(dev);
614 return sprintf(buf, "%s\n", rdev_get_name(rdev));
616 static DEVICE_ATTR_RO(name);
618 static const char *regulator_opmode_to_str(int mode)
621 case REGULATOR_MODE_FAST:
623 case REGULATOR_MODE_NORMAL:
625 case REGULATOR_MODE_IDLE:
627 case REGULATOR_MODE_STANDBY:
633 static ssize_t regulator_print_opmode(char *buf, int mode)
635 return sprintf(buf, "%s\n", regulator_opmode_to_str(mode));
638 static ssize_t opmode_show(struct device *dev,
639 struct device_attribute *attr, char *buf)
641 struct regulator_dev *rdev = dev_get_drvdata(dev);
643 return regulator_print_opmode(buf, _regulator_get_mode(rdev));
645 static DEVICE_ATTR_RO(opmode);
647 static ssize_t regulator_print_state(char *buf, int state)
650 return sprintf(buf, "enabled\n");
652 return sprintf(buf, "disabled\n");
654 return sprintf(buf, "unknown\n");
657 static ssize_t state_show(struct device *dev,
658 struct device_attribute *attr, char *buf)
660 struct regulator_dev *rdev = dev_get_drvdata(dev);
663 regulator_lock(rdev);
664 ret = regulator_print_state(buf, _regulator_is_enabled(rdev));
665 regulator_unlock(rdev);
669 static DEVICE_ATTR_RO(state);
671 static ssize_t status_show(struct device *dev,
672 struct device_attribute *attr, char *buf)
674 struct regulator_dev *rdev = dev_get_drvdata(dev);
678 status = rdev->desc->ops->get_status(rdev);
683 case REGULATOR_STATUS_OFF:
686 case REGULATOR_STATUS_ON:
689 case REGULATOR_STATUS_ERROR:
692 case REGULATOR_STATUS_FAST:
695 case REGULATOR_STATUS_NORMAL:
698 case REGULATOR_STATUS_IDLE:
701 case REGULATOR_STATUS_STANDBY:
704 case REGULATOR_STATUS_BYPASS:
707 case REGULATOR_STATUS_UNDEFINED:
714 return sprintf(buf, "%s\n", label);
716 static DEVICE_ATTR_RO(status);
718 static ssize_t min_microamps_show(struct device *dev,
719 struct device_attribute *attr, char *buf)
721 struct regulator_dev *rdev = dev_get_drvdata(dev);
723 if (!rdev->constraints)
724 return sprintf(buf, "constraint not defined\n");
726 return sprintf(buf, "%d\n", rdev->constraints->min_uA);
728 static DEVICE_ATTR_RO(min_microamps);
730 static ssize_t max_microamps_show(struct device *dev,
731 struct device_attribute *attr, char *buf)
733 struct regulator_dev *rdev = dev_get_drvdata(dev);
735 if (!rdev->constraints)
736 return sprintf(buf, "constraint not defined\n");
738 return sprintf(buf, "%d\n", rdev->constraints->max_uA);
740 static DEVICE_ATTR_RO(max_microamps);
742 static ssize_t min_microvolts_show(struct device *dev,
743 struct device_attribute *attr, char *buf)
745 struct regulator_dev *rdev = dev_get_drvdata(dev);
747 if (!rdev->constraints)
748 return sprintf(buf, "constraint not defined\n");
750 return sprintf(buf, "%d\n", rdev->constraints->min_uV);
752 static DEVICE_ATTR_RO(min_microvolts);
754 static ssize_t max_microvolts_show(struct device *dev,
755 struct device_attribute *attr, char *buf)
757 struct regulator_dev *rdev = dev_get_drvdata(dev);
759 if (!rdev->constraints)
760 return sprintf(buf, "constraint not defined\n");
762 return sprintf(buf, "%d\n", rdev->constraints->max_uV);
764 static DEVICE_ATTR_RO(max_microvolts);
766 static ssize_t requested_microamps_show(struct device *dev,
767 struct device_attribute *attr, char *buf)
769 struct regulator_dev *rdev = dev_get_drvdata(dev);
770 struct regulator *regulator;
773 regulator_lock(rdev);
774 list_for_each_entry(regulator, &rdev->consumer_list, list) {
775 if (regulator->enable_count)
776 uA += regulator->uA_load;
778 regulator_unlock(rdev);
779 return sprintf(buf, "%d\n", uA);
781 static DEVICE_ATTR_RO(requested_microamps);
783 static ssize_t num_users_show(struct device *dev, struct device_attribute *attr,
786 struct regulator_dev *rdev = dev_get_drvdata(dev);
787 return sprintf(buf, "%d\n", rdev->use_count);
789 static DEVICE_ATTR_RO(num_users);
791 static ssize_t type_show(struct device *dev, struct device_attribute *attr,
794 struct regulator_dev *rdev = dev_get_drvdata(dev);
796 switch (rdev->desc->type) {
797 case REGULATOR_VOLTAGE:
798 return sprintf(buf, "voltage\n");
799 case REGULATOR_CURRENT:
800 return sprintf(buf, "current\n");
802 return sprintf(buf, "unknown\n");
804 static DEVICE_ATTR_RO(type);
806 static ssize_t suspend_mem_microvolts_show(struct device *dev,
807 struct device_attribute *attr, char *buf)
809 struct regulator_dev *rdev = dev_get_drvdata(dev);
811 return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
813 static DEVICE_ATTR_RO(suspend_mem_microvolts);
815 static ssize_t suspend_disk_microvolts_show(struct device *dev,
816 struct device_attribute *attr, char *buf)
818 struct regulator_dev *rdev = dev_get_drvdata(dev);
820 return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
822 static DEVICE_ATTR_RO(suspend_disk_microvolts);
824 static ssize_t suspend_standby_microvolts_show(struct device *dev,
825 struct device_attribute *attr, char *buf)
827 struct regulator_dev *rdev = dev_get_drvdata(dev);
829 return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
831 static DEVICE_ATTR_RO(suspend_standby_microvolts);
833 static ssize_t suspend_mem_mode_show(struct device *dev,
834 struct device_attribute *attr, char *buf)
836 struct regulator_dev *rdev = dev_get_drvdata(dev);
838 return regulator_print_opmode(buf,
839 rdev->constraints->state_mem.mode);
841 static DEVICE_ATTR_RO(suspend_mem_mode);
843 static ssize_t suspend_disk_mode_show(struct device *dev,
844 struct device_attribute *attr, char *buf)
846 struct regulator_dev *rdev = dev_get_drvdata(dev);
848 return regulator_print_opmode(buf,
849 rdev->constraints->state_disk.mode);
851 static DEVICE_ATTR_RO(suspend_disk_mode);
853 static ssize_t suspend_standby_mode_show(struct device *dev,
854 struct device_attribute *attr, char *buf)
856 struct regulator_dev *rdev = dev_get_drvdata(dev);
858 return regulator_print_opmode(buf,
859 rdev->constraints->state_standby.mode);
861 static DEVICE_ATTR_RO(suspend_standby_mode);
863 static ssize_t suspend_mem_state_show(struct device *dev,
864 struct device_attribute *attr, char *buf)
866 struct regulator_dev *rdev = dev_get_drvdata(dev);
868 return regulator_print_state(buf,
869 rdev->constraints->state_mem.enabled);
871 static DEVICE_ATTR_RO(suspend_mem_state);
873 static ssize_t suspend_disk_state_show(struct device *dev,
874 struct device_attribute *attr, char *buf)
876 struct regulator_dev *rdev = dev_get_drvdata(dev);
878 return regulator_print_state(buf,
879 rdev->constraints->state_disk.enabled);
881 static DEVICE_ATTR_RO(suspend_disk_state);
883 static ssize_t suspend_standby_state_show(struct device *dev,
884 struct device_attribute *attr, char *buf)
886 struct regulator_dev *rdev = dev_get_drvdata(dev);
888 return regulator_print_state(buf,
889 rdev->constraints->state_standby.enabled);
891 static DEVICE_ATTR_RO(suspend_standby_state);
893 static ssize_t bypass_show(struct device *dev,
894 struct device_attribute *attr, char *buf)
896 struct regulator_dev *rdev = dev_get_drvdata(dev);
901 ret = rdev->desc->ops->get_bypass(rdev, &bypass);
910 return sprintf(buf, "%s\n", report);
912 static DEVICE_ATTR_RO(bypass);
914 /* Calculate the new optimum regulator operating mode based on the new total
915 * consumer load. All locks held by caller
917 static int drms_uA_update(struct regulator_dev *rdev)
919 struct regulator *sibling;
920 int current_uA = 0, output_uV, input_uV, err;
924 * first check to see if we can set modes at all, otherwise just
925 * tell the consumer everything is OK.
927 if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) {
928 rdev_dbg(rdev, "DRMS operation not allowed\n");
932 if (!rdev->desc->ops->get_optimum_mode &&
933 !rdev->desc->ops->set_load)
936 if (!rdev->desc->ops->set_mode &&
937 !rdev->desc->ops->set_load)
940 /* calc total requested load */
941 list_for_each_entry(sibling, &rdev->consumer_list, list) {
942 if (sibling->enable_count)
943 current_uA += sibling->uA_load;
946 current_uA += rdev->constraints->system_load;
948 if (rdev->desc->ops->set_load) {
949 /* set the optimum mode for our new total regulator load */
950 err = rdev->desc->ops->set_load(rdev, current_uA);
952 rdev_err(rdev, "failed to set load %d: %pe\n",
953 current_uA, ERR_PTR(err));
955 /* get output voltage */
956 output_uV = regulator_get_voltage_rdev(rdev);
957 if (output_uV <= 0) {
958 rdev_err(rdev, "invalid output voltage found\n");
962 /* get input voltage */
965 input_uV = regulator_get_voltage(rdev->supply);
967 input_uV = rdev->constraints->input_uV;
969 rdev_err(rdev, "invalid input voltage found\n");
973 /* now get the optimum mode for our new total regulator load */
974 mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
975 output_uV, current_uA);
977 /* check the new mode is allowed */
978 err = regulator_mode_constrain(rdev, &mode);
980 rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV: %pe\n",
981 current_uA, input_uV, output_uV, ERR_PTR(err));
985 err = rdev->desc->ops->set_mode(rdev, mode);
987 rdev_err(rdev, "failed to set optimum mode %x: %pe\n",
994 static int __suspend_set_state(struct regulator_dev *rdev,
995 const struct regulator_state *rstate)
999 if (rstate->enabled == ENABLE_IN_SUSPEND &&
1000 rdev->desc->ops->set_suspend_enable)
1001 ret = rdev->desc->ops->set_suspend_enable(rdev);
1002 else if (rstate->enabled == DISABLE_IN_SUSPEND &&
1003 rdev->desc->ops->set_suspend_disable)
1004 ret = rdev->desc->ops->set_suspend_disable(rdev);
1005 else /* OK if set_suspend_enable or set_suspend_disable is NULL */
1009 rdev_err(rdev, "failed to enabled/disable: %pe\n", ERR_PTR(ret));
1013 if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) {
1014 ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV);
1016 rdev_err(rdev, "failed to set voltage: %pe\n", ERR_PTR(ret));
1021 if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) {
1022 ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode);
1024 rdev_err(rdev, "failed to set mode: %pe\n", ERR_PTR(ret));
1032 static int suspend_set_initial_state(struct regulator_dev *rdev)
1034 const struct regulator_state *rstate;
1036 rstate = regulator_get_suspend_state_check(rdev,
1037 rdev->constraints->initial_state);
1041 return __suspend_set_state(rdev, rstate);
1044 #if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
1045 static void print_constraints_debug(struct regulator_dev *rdev)
1047 struct regulation_constraints *constraints = rdev->constraints;
1049 size_t len = sizeof(buf) - 1;
1053 if (constraints->min_uV && constraints->max_uV) {
1054 if (constraints->min_uV == constraints->max_uV)
1055 count += scnprintf(buf + count, len - count, "%d mV ",
1056 constraints->min_uV / 1000);
1058 count += scnprintf(buf + count, len - count,
1060 constraints->min_uV / 1000,
1061 constraints->max_uV / 1000);
1064 if (!constraints->min_uV ||
1065 constraints->min_uV != constraints->max_uV) {
1066 ret = regulator_get_voltage_rdev(rdev);
1068 count += scnprintf(buf + count, len - count,
1069 "at %d mV ", ret / 1000);
1072 if (constraints->uV_offset)
1073 count += scnprintf(buf + count, len - count, "%dmV offset ",
1074 constraints->uV_offset / 1000);
1076 if (constraints->min_uA && constraints->max_uA) {
1077 if (constraints->min_uA == constraints->max_uA)
1078 count += scnprintf(buf + count, len - count, "%d mA ",
1079 constraints->min_uA / 1000);
1081 count += scnprintf(buf + count, len - count,
1083 constraints->min_uA / 1000,
1084 constraints->max_uA / 1000);
1087 if (!constraints->min_uA ||
1088 constraints->min_uA != constraints->max_uA) {
1089 ret = _regulator_get_current_limit(rdev);
1091 count += scnprintf(buf + count, len - count,
1092 "at %d mA ", ret / 1000);
1095 if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
1096 count += scnprintf(buf + count, len - count, "fast ");
1097 if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
1098 count += scnprintf(buf + count, len - count, "normal ");
1099 if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
1100 count += scnprintf(buf + count, len - count, "idle ");
1101 if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
1102 count += scnprintf(buf + count, len - count, "standby ");
1105 count = scnprintf(buf, len, "no parameters");
1109 count += scnprintf(buf + count, len - count, ", %s",
1110 _regulator_is_enabled(rdev) ? "enabled" : "disabled");
1112 rdev_dbg(rdev, "%s\n", buf);
1114 #else /* !DEBUG && !CONFIG_DYNAMIC_DEBUG */
1115 static inline void print_constraints_debug(struct regulator_dev *rdev) {}
1116 #endif /* !DEBUG && !CONFIG_DYNAMIC_DEBUG */
1118 static void print_constraints(struct regulator_dev *rdev)
1120 struct regulation_constraints *constraints = rdev->constraints;
1122 print_constraints_debug(rdev);
1124 if ((constraints->min_uV != constraints->max_uV) &&
1125 !regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE))
1127 "Voltage range but no REGULATOR_CHANGE_VOLTAGE\n");
1130 static int machine_constraints_voltage(struct regulator_dev *rdev,
1131 struct regulation_constraints *constraints)
1133 const struct regulator_ops *ops = rdev->desc->ops;
1136 /* do we need to apply the constraint voltage */
1137 if (rdev->constraints->apply_uV &&
1138 rdev->constraints->min_uV && rdev->constraints->max_uV) {
1139 int target_min, target_max;
1140 int current_uV = regulator_get_voltage_rdev(rdev);
1142 if (current_uV == -ENOTRECOVERABLE) {
1143 /* This regulator can't be read and must be initialized */
1144 rdev_info(rdev, "Setting %d-%duV\n",
1145 rdev->constraints->min_uV,
1146 rdev->constraints->max_uV);
1147 _regulator_do_set_voltage(rdev,
1148 rdev->constraints->min_uV,
1149 rdev->constraints->max_uV);
1150 current_uV = regulator_get_voltage_rdev(rdev);
1153 if (current_uV < 0) {
1155 "failed to get the current voltage: %pe\n",
1156 ERR_PTR(current_uV));
1161 * If we're below the minimum voltage move up to the
1162 * minimum voltage, if we're above the maximum voltage
1163 * then move down to the maximum.
1165 target_min = current_uV;
1166 target_max = current_uV;
1168 if (current_uV < rdev->constraints->min_uV) {
1169 target_min = rdev->constraints->min_uV;
1170 target_max = rdev->constraints->min_uV;
1173 if (current_uV > rdev->constraints->max_uV) {
1174 target_min = rdev->constraints->max_uV;
1175 target_max = rdev->constraints->max_uV;
1178 if (target_min != current_uV || target_max != current_uV) {
1179 rdev_info(rdev, "Bringing %duV into %d-%duV\n",
1180 current_uV, target_min, target_max);
1181 ret = _regulator_do_set_voltage(
1182 rdev, target_min, target_max);
1185 "failed to apply %d-%duV constraint: %pe\n",
1186 target_min, target_max, ERR_PTR(ret));
1192 /* constrain machine-level voltage specs to fit
1193 * the actual range supported by this regulator.
1195 if (ops->list_voltage && rdev->desc->n_voltages) {
1196 int count = rdev->desc->n_voltages;
1198 int min_uV = INT_MAX;
1199 int max_uV = INT_MIN;
1200 int cmin = constraints->min_uV;
1201 int cmax = constraints->max_uV;
1203 /* it's safe to autoconfigure fixed-voltage supplies
1204 * and the constraints are used by list_voltage.
1206 if (count == 1 && !cmin) {
1209 constraints->min_uV = cmin;
1210 constraints->max_uV = cmax;
1213 /* voltage constraints are optional */
1214 if ((cmin == 0) && (cmax == 0))
1217 /* else require explicit machine-level constraints */
1218 if (cmin <= 0 || cmax <= 0 || cmax < cmin) {
1219 rdev_err(rdev, "invalid voltage constraints\n");
1223 /* no need to loop voltages if range is continuous */
1224 if (rdev->desc->continuous_voltage_range)
1227 /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */
1228 for (i = 0; i < count; i++) {
1231 value = ops->list_voltage(rdev, i);
1235 /* maybe adjust [min_uV..max_uV] */
1236 if (value >= cmin && value < min_uV)
1238 if (value <= cmax && value > max_uV)
1242 /* final: [min_uV..max_uV] valid iff constraints valid */
1243 if (max_uV < min_uV) {
1245 "unsupportable voltage constraints %u-%uuV\n",
1250 /* use regulator's subset of machine constraints */
1251 if (constraints->min_uV < min_uV) {
1252 rdev_dbg(rdev, "override min_uV, %d -> %d\n",
1253 constraints->min_uV, min_uV);
1254 constraints->min_uV = min_uV;
1256 if (constraints->max_uV > max_uV) {
1257 rdev_dbg(rdev, "override max_uV, %d -> %d\n",
1258 constraints->max_uV, max_uV);
1259 constraints->max_uV = max_uV;
1266 static int machine_constraints_current(struct regulator_dev *rdev,
1267 struct regulation_constraints *constraints)
1269 const struct regulator_ops *ops = rdev->desc->ops;
1272 if (!constraints->min_uA && !constraints->max_uA)
1275 if (constraints->min_uA > constraints->max_uA) {
1276 rdev_err(rdev, "Invalid current constraints\n");
1280 if (!ops->set_current_limit || !ops->get_current_limit) {
1281 rdev_warn(rdev, "Operation of current configuration missing\n");
1285 /* Set regulator current in constraints range */
1286 ret = ops->set_current_limit(rdev, constraints->min_uA,
1287 constraints->max_uA);
1289 rdev_err(rdev, "Failed to set current constraint, %d\n", ret);
1296 static int _regulator_do_enable(struct regulator_dev *rdev);
1298 static int notif_set_limit(struct regulator_dev *rdev,
1299 int (*set)(struct regulator_dev *, int, int, bool),
1300 int limit, int severity)
1304 if (limit == REGULATOR_NOTIF_LIMIT_DISABLE) {
1311 if (limit == REGULATOR_NOTIF_LIMIT_ENABLE)
1314 return set(rdev, limit, severity, enable);
1317 static int handle_notify_limits(struct regulator_dev *rdev,
1318 int (*set)(struct regulator_dev *, int, int, bool),
1319 struct notification_limit *limits)
1327 ret = notif_set_limit(rdev, set, limits->prot,
1328 REGULATOR_SEVERITY_PROT);
1333 ret = notif_set_limit(rdev, set, limits->err,
1334 REGULATOR_SEVERITY_ERR);
1339 ret = notif_set_limit(rdev, set, limits->warn,
1340 REGULATOR_SEVERITY_WARN);
1345 * set_machine_constraints - sets regulator constraints
1346 * @rdev: regulator source
1348 * Allows platform initialisation code to define and constrain
1349 * regulator circuits e.g. valid voltage/current ranges, etc. NOTE:
1350 * Constraints *must* be set by platform code in order for some
1351 * regulator operations to proceed i.e. set_voltage, set_current_limit,
1354 static int set_machine_constraints(struct regulator_dev *rdev)
1357 const struct regulator_ops *ops = rdev->desc->ops;
1359 ret = machine_constraints_voltage(rdev, rdev->constraints);
1363 ret = machine_constraints_current(rdev, rdev->constraints);
1367 if (rdev->constraints->ilim_uA && ops->set_input_current_limit) {
1368 ret = ops->set_input_current_limit(rdev,
1369 rdev->constraints->ilim_uA);
1371 rdev_err(rdev, "failed to set input limit: %pe\n", ERR_PTR(ret));
1376 /* do we need to setup our suspend state */
1377 if (rdev->constraints->initial_state) {
1378 ret = suspend_set_initial_state(rdev);
1380 rdev_err(rdev, "failed to set suspend state: %pe\n", ERR_PTR(ret));
1385 if (rdev->constraints->initial_mode) {
1386 if (!ops->set_mode) {
1387 rdev_err(rdev, "no set_mode operation\n");
1391 ret = ops->set_mode(rdev, rdev->constraints->initial_mode);
1393 rdev_err(rdev, "failed to set initial mode: %pe\n", ERR_PTR(ret));
1396 } else if (rdev->constraints->system_load) {
1398 * We'll only apply the initial system load if an
1399 * initial mode wasn't specified.
1401 drms_uA_update(rdev);
1404 if ((rdev->constraints->ramp_delay || rdev->constraints->ramp_disable)
1405 && ops->set_ramp_delay) {
1406 ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
1408 rdev_err(rdev, "failed to set ramp_delay: %pe\n", ERR_PTR(ret));
1413 if (rdev->constraints->pull_down && ops->set_pull_down) {
1414 ret = ops->set_pull_down(rdev);
1416 rdev_err(rdev, "failed to set pull down: %pe\n", ERR_PTR(ret));
1421 if (rdev->constraints->soft_start && ops->set_soft_start) {
1422 ret = ops->set_soft_start(rdev);
1424 rdev_err(rdev, "failed to set soft start: %pe\n", ERR_PTR(ret));
1430 * Existing logic does not warn if over_current_protection is given as
1431 * a constraint but driver does not support that. I think we should
1432 * warn about this type of issues as it is possible someone changes
1433 * PMIC on board to another type - and the another PMIC's driver does
1434 * not support setting protection. Board composer may happily believe
1435 * the DT limits are respected - especially if the new PMIC HW also
1436 * supports protection but the driver does not. I won't change the logic
1437 * without hearing more experienced opinion on this though.
1439 * If warning is seen as a good idea then we can merge handling the
1440 * over-curret protection and detection and get rid of this special
1443 if (rdev->constraints->over_current_protection
1444 && ops->set_over_current_protection) {
1445 int lim = rdev->constraints->over_curr_limits.prot;
1447 ret = ops->set_over_current_protection(rdev, lim,
1448 REGULATOR_SEVERITY_PROT,
1451 rdev_err(rdev, "failed to set over current protection: %pe\n",
1457 if (rdev->constraints->over_current_detection)
1458 ret = handle_notify_limits(rdev,
1459 ops->set_over_current_protection,
1460 &rdev->constraints->over_curr_limits);
1462 if (ret != -EOPNOTSUPP) {
1463 rdev_err(rdev, "failed to set over current limits: %pe\n",
1468 "IC does not support requested over-current limits\n");
1471 if (rdev->constraints->over_voltage_detection)
1472 ret = handle_notify_limits(rdev,
1473 ops->set_over_voltage_protection,
1474 &rdev->constraints->over_voltage_limits);
1476 if (ret != -EOPNOTSUPP) {
1477 rdev_err(rdev, "failed to set over voltage limits %pe\n",
1482 "IC does not support requested over voltage limits\n");
1485 if (rdev->constraints->under_voltage_detection)
1486 ret = handle_notify_limits(rdev,
1487 ops->set_under_voltage_protection,
1488 &rdev->constraints->under_voltage_limits);
1490 if (ret != -EOPNOTSUPP) {
1491 rdev_err(rdev, "failed to set under voltage limits %pe\n",
1496 "IC does not support requested under voltage limits\n");
1499 if (rdev->constraints->over_temp_detection)
1500 ret = handle_notify_limits(rdev,
1501 ops->set_thermal_protection,
1502 &rdev->constraints->temp_limits);
1504 if (ret != -EOPNOTSUPP) {
1505 rdev_err(rdev, "failed to set temperature limits %pe\n",
1510 "IC does not support requested temperature limits\n");
1513 if (rdev->constraints->active_discharge && ops->set_active_discharge) {
1514 bool ad_state = (rdev->constraints->active_discharge ==
1515 REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false;
1517 ret = ops->set_active_discharge(rdev, ad_state);
1519 rdev_err(rdev, "failed to set active discharge: %pe\n", ERR_PTR(ret));
1524 /* If the constraints say the regulator should be on at this point
1525 * and we have control then make sure it is enabled.
1527 if (rdev->constraints->always_on || rdev->constraints->boot_on) {
1528 /* If we want to enable this regulator, make sure that we know
1529 * the supplying regulator.
1531 if (rdev->supply_name && !rdev->supply)
1532 return -EPROBE_DEFER;
1535 ret = regulator_enable(rdev->supply);
1537 _regulator_put(rdev->supply);
1538 rdev->supply = NULL;
1543 ret = _regulator_do_enable(rdev);
1544 if (ret < 0 && ret != -EINVAL) {
1545 rdev_err(rdev, "failed to enable: %pe\n", ERR_PTR(ret));
1549 if (rdev->constraints->always_on)
1551 } else if (rdev->desc->off_on_delay) {
1552 rdev->last_off = ktime_get();
1555 print_constraints(rdev);
1560 * set_supply - set regulator supply regulator
1561 * @rdev: regulator name
1562 * @supply_rdev: supply regulator name
1564 * Called by platform initialisation code to set the supply regulator for this
1565 * regulator. This ensures that a regulators supply will also be enabled by the
1566 * core if it's child is enabled.
1568 static int set_supply(struct regulator_dev *rdev,
1569 struct regulator_dev *supply_rdev)
1573 rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev));
1575 if (!try_module_get(supply_rdev->owner))
1578 rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY");
1579 if (rdev->supply == NULL) {
1583 supply_rdev->open_count++;
1589 * set_consumer_device_supply - Bind a regulator to a symbolic supply
1590 * @rdev: regulator source
1591 * @consumer_dev_name: dev_name() string for device supply applies to
1592 * @supply: symbolic name for supply
1594 * Allows platform initialisation code to map physical regulator
1595 * sources to symbolic names for supplies for use by devices. Devices
1596 * should use these symbolic names to request regulators, avoiding the
1597 * need to provide board-specific regulator names as platform data.
1599 static int set_consumer_device_supply(struct regulator_dev *rdev,
1600 const char *consumer_dev_name,
1603 struct regulator_map *node, *new_node;
1609 if (consumer_dev_name != NULL)
1614 new_node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
1615 if (new_node == NULL)
1618 new_node->regulator = rdev;
1619 new_node->supply = supply;
1622 new_node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
1623 if (new_node->dev_name == NULL) {
1629 mutex_lock(®ulator_list_mutex);
1630 list_for_each_entry(node, ®ulator_map_list, list) {
1631 if (node->dev_name && consumer_dev_name) {
1632 if (strcmp(node->dev_name, consumer_dev_name) != 0)
1634 } else if (node->dev_name || consumer_dev_name) {
1638 if (strcmp(node->supply, supply) != 0)
1641 pr_debug("%s: %s/%s is '%s' supply; fail %s/%s\n",
1643 dev_name(&node->regulator->dev),
1644 node->regulator->desc->name,
1646 dev_name(&rdev->dev), rdev_get_name(rdev));
1650 list_add(&new_node->list, ®ulator_map_list);
1651 mutex_unlock(®ulator_list_mutex);
1656 mutex_unlock(®ulator_list_mutex);
1657 kfree(new_node->dev_name);
1662 static void unset_regulator_supplies(struct regulator_dev *rdev)
1664 struct regulator_map *node, *n;
1666 list_for_each_entry_safe(node, n, ®ulator_map_list, list) {
1667 if (rdev == node->regulator) {
1668 list_del(&node->list);
1669 kfree(node->dev_name);
1675 #ifdef CONFIG_DEBUG_FS
1676 static ssize_t constraint_flags_read_file(struct file *file,
1677 char __user *user_buf,
1678 size_t count, loff_t *ppos)
1680 const struct regulator *regulator = file->private_data;
1681 const struct regulation_constraints *c = regulator->rdev->constraints;
1688 buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
1692 ret = snprintf(buf, PAGE_SIZE,
1696 "ramp_disable: %u\n"
1699 "over_current_protection: %u\n",
1706 c->over_current_protection);
1708 ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
1716 static const struct file_operations constraint_flags_fops = {
1717 #ifdef CONFIG_DEBUG_FS
1718 .open = simple_open,
1719 .read = constraint_flags_read_file,
1720 .llseek = default_llseek,
1724 #define REG_STR_SIZE 64
1726 static struct regulator *create_regulator(struct regulator_dev *rdev,
1728 const char *supply_name)
1730 struct regulator *regulator;
1734 char buf[REG_STR_SIZE];
1737 size = snprintf(buf, REG_STR_SIZE, "%s-%s",
1738 dev->kobj.name, supply_name);
1739 if (size >= REG_STR_SIZE)
1742 supply_name = kstrdup(buf, GFP_KERNEL);
1743 if (supply_name == NULL)
1746 supply_name = kstrdup_const(supply_name, GFP_KERNEL);
1747 if (supply_name == NULL)
1751 regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
1752 if (regulator == NULL) {
1757 regulator->rdev = rdev;
1758 regulator->supply_name = supply_name;
1760 regulator_lock(rdev);
1761 list_add(®ulator->list, &rdev->consumer_list);
1762 regulator_unlock(rdev);
1765 regulator->dev = dev;
1767 /* Add a link to the device sysfs entry */
1768 err = sysfs_create_link_nowarn(&rdev->dev.kobj, &dev->kobj,
1771 rdev_dbg(rdev, "could not add device link %s: %pe\n",
1772 dev->kobj.name, ERR_PTR(err));
1778 regulator->debugfs = debugfs_create_dir(supply_name, rdev->debugfs);
1779 if (!regulator->debugfs) {
1780 rdev_dbg(rdev, "Failed to create debugfs directory\n");
1782 debugfs_create_u32("uA_load", 0444, regulator->debugfs,
1783 ®ulator->uA_load);
1784 debugfs_create_u32("min_uV", 0444, regulator->debugfs,
1785 ®ulator->voltage[PM_SUSPEND_ON].min_uV);
1786 debugfs_create_u32("max_uV", 0444, regulator->debugfs,
1787 ®ulator->voltage[PM_SUSPEND_ON].max_uV);
1788 debugfs_create_file("constraint_flags", 0444,
1789 regulator->debugfs, regulator,
1790 &constraint_flags_fops);
1794 * Check now if the regulator is an always on regulator - if
1795 * it is then we don't need to do nearly so much work for
1796 * enable/disable calls.
1798 if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS) &&
1799 _regulator_is_enabled(rdev))
1800 regulator->always_on = true;
1805 static int _regulator_get_enable_time(struct regulator_dev *rdev)
1807 if (rdev->constraints && rdev->constraints->enable_time)
1808 return rdev->constraints->enable_time;
1809 if (rdev->desc->ops->enable_time)
1810 return rdev->desc->ops->enable_time(rdev);
1811 return rdev->desc->enable_time;
1814 static struct regulator_supply_alias *regulator_find_supply_alias(
1815 struct device *dev, const char *supply)
1817 struct regulator_supply_alias *map;
1819 list_for_each_entry(map, ®ulator_supply_alias_list, list)
1820 if (map->src_dev == dev && strcmp(map->src_supply, supply) == 0)
1826 static void regulator_supply_alias(struct device **dev, const char **supply)
1828 struct regulator_supply_alias *map;
1830 map = regulator_find_supply_alias(*dev, *supply);
1832 dev_dbg(*dev, "Mapping supply %s to %s,%s\n",
1833 *supply, map->alias_supply,
1834 dev_name(map->alias_dev));
1835 *dev = map->alias_dev;
1836 *supply = map->alias_supply;
1840 static int regulator_match(struct device *dev, const void *data)
1842 struct regulator_dev *r = dev_to_rdev(dev);
1844 return strcmp(rdev_get_name(r), data) == 0;
1847 static struct regulator_dev *regulator_lookup_by_name(const char *name)
1851 dev = class_find_device(®ulator_class, NULL, name, regulator_match);
1853 return dev ? dev_to_rdev(dev) : NULL;
1857 * regulator_dev_lookup - lookup a regulator device.
1858 * @dev: device for regulator "consumer".
1859 * @supply: Supply name or regulator ID.
1861 * If successful, returns a struct regulator_dev that corresponds to the name
1862 * @supply and with the embedded struct device refcount incremented by one.
1863 * The refcount must be dropped by calling put_device().
1864 * On failure one of the following ERR-PTR-encoded values is returned:
1865 * -ENODEV if lookup fails permanently, -EPROBE_DEFER if lookup could succeed
1868 static struct regulator_dev *regulator_dev_lookup(struct device *dev,
1871 struct regulator_dev *r = NULL;
1872 struct device_node *node;
1873 struct regulator_map *map;
1874 const char *devname = NULL;
1876 regulator_supply_alias(&dev, &supply);
1878 /* first do a dt based lookup */
1879 if (dev && dev->of_node) {
1880 node = of_get_regulator(dev, supply);
1882 r = of_find_regulator_by_node(node);
1887 * We have a node, but there is no device.
1888 * assume it has not registered yet.
1890 return ERR_PTR(-EPROBE_DEFER);
1894 /* if not found, try doing it non-dt way */
1896 devname = dev_name(dev);
1898 mutex_lock(®ulator_list_mutex);
1899 list_for_each_entry(map, ®ulator_map_list, list) {
1900 /* If the mapping has a device set up it must match */
1901 if (map->dev_name &&
1902 (!devname || strcmp(map->dev_name, devname)))
1905 if (strcmp(map->supply, supply) == 0 &&
1906 get_device(&map->regulator->dev)) {
1911 mutex_unlock(®ulator_list_mutex);
1916 r = regulator_lookup_by_name(supply);
1920 return ERR_PTR(-ENODEV);
1923 static int regulator_resolve_supply(struct regulator_dev *rdev)
1925 struct regulator_dev *r;
1926 struct device *dev = rdev->dev.parent;
1929 /* No supply to resolve? */
1930 if (!rdev->supply_name)
1933 /* Supply already resolved? (fast-path without locking contention) */
1937 r = regulator_dev_lookup(dev, rdev->supply_name);
1941 /* Did the lookup explicitly defer for us? */
1942 if (ret == -EPROBE_DEFER)
1945 if (have_full_constraints()) {
1946 r = dummy_regulator_rdev;
1947 get_device(&r->dev);
1949 dev_err(dev, "Failed to resolve %s-supply for %s\n",
1950 rdev->supply_name, rdev->desc->name);
1951 ret = -EPROBE_DEFER;
1957 dev_err(dev, "Supply for %s (%s) resolved to itself\n",
1958 rdev->desc->name, rdev->supply_name);
1959 if (!have_full_constraints()) {
1963 r = dummy_regulator_rdev;
1964 get_device(&r->dev);
1968 * If the supply's parent device is not the same as the
1969 * regulator's parent device, then ensure the parent device
1970 * is bound before we resolve the supply, in case the parent
1971 * device get probe deferred and unregisters the supply.
1973 if (r->dev.parent && r->dev.parent != rdev->dev.parent) {
1974 if (!device_is_bound(r->dev.parent)) {
1975 put_device(&r->dev);
1976 ret = -EPROBE_DEFER;
1981 /* Recursively resolve the supply of the supply */
1982 ret = regulator_resolve_supply(r);
1984 put_device(&r->dev);
1989 * Recheck rdev->supply with rdev->mutex lock held to avoid a race
1990 * between rdev->supply null check and setting rdev->supply in
1991 * set_supply() from concurrent tasks.
1993 regulator_lock(rdev);
1995 /* Supply just resolved by a concurrent task? */
1997 regulator_unlock(rdev);
1998 put_device(&r->dev);
2002 ret = set_supply(rdev, r);
2004 regulator_unlock(rdev);
2005 put_device(&r->dev);
2009 regulator_unlock(rdev);
2012 * In set_machine_constraints() we may have turned this regulator on
2013 * but we couldn't propagate to the supply if it hadn't been resolved
2016 if (rdev->use_count) {
2017 ret = regulator_enable(rdev->supply);
2019 _regulator_put(rdev->supply);
2020 rdev->supply = NULL;
2029 /* Internal regulator request function */
2030 struct regulator *_regulator_get(struct device *dev, const char *id,
2031 enum regulator_get_type get_type)
2033 struct regulator_dev *rdev;
2034 struct regulator *regulator;
2035 struct device_link *link;
2038 if (get_type >= MAX_GET_TYPE) {
2039 dev_err(dev, "invalid type %d in %s\n", get_type, __func__);
2040 return ERR_PTR(-EINVAL);
2044 pr_err("get() with no identifier\n");
2045 return ERR_PTR(-EINVAL);
2048 rdev = regulator_dev_lookup(dev, id);
2050 ret = PTR_ERR(rdev);
2053 * If regulator_dev_lookup() fails with error other
2054 * than -ENODEV our job here is done, we simply return it.
2057 return ERR_PTR(ret);
2059 if (!have_full_constraints()) {
2061 "incomplete constraints, dummy supplies not allowed\n");
2062 return ERR_PTR(-ENODEV);
2068 * Assume that a regulator is physically present and
2069 * enabled, even if it isn't hooked up, and just
2072 dev_warn(dev, "supply %s not found, using dummy regulator\n", id);
2073 rdev = dummy_regulator_rdev;
2074 get_device(&rdev->dev);
2079 "dummy supplies not allowed for exclusive requests\n");
2083 return ERR_PTR(-ENODEV);
2087 if (rdev->exclusive) {
2088 regulator = ERR_PTR(-EPERM);
2089 put_device(&rdev->dev);
2093 if (get_type == EXCLUSIVE_GET && rdev->open_count) {
2094 regulator = ERR_PTR(-EBUSY);
2095 put_device(&rdev->dev);
2099 mutex_lock(®ulator_list_mutex);
2100 ret = (rdev->coupling_desc.n_resolved != rdev->coupling_desc.n_coupled);
2101 mutex_unlock(®ulator_list_mutex);
2104 regulator = ERR_PTR(-EPROBE_DEFER);
2105 put_device(&rdev->dev);
2109 ret = regulator_resolve_supply(rdev);
2111 regulator = ERR_PTR(ret);
2112 put_device(&rdev->dev);
2116 if (!try_module_get(rdev->owner)) {
2117 regulator = ERR_PTR(-EPROBE_DEFER);
2118 put_device(&rdev->dev);
2122 regulator = create_regulator(rdev, dev, id);
2123 if (regulator == NULL) {
2124 regulator = ERR_PTR(-ENOMEM);
2125 module_put(rdev->owner);
2126 put_device(&rdev->dev);
2131 if (get_type == EXCLUSIVE_GET) {
2132 rdev->exclusive = 1;
2134 ret = _regulator_is_enabled(rdev);
2136 rdev->use_count = 1;
2137 regulator->enable_count = 1;
2139 rdev->use_count = 0;
2140 regulator->enable_count = 0;
2144 link = device_link_add(dev, &rdev->dev, DL_FLAG_STATELESS);
2145 if (!IS_ERR_OR_NULL(link))
2146 regulator->device_link = true;
2152 * regulator_get - lookup and obtain a reference to a regulator.
2153 * @dev: device for regulator "consumer"
2154 * @id: Supply name or regulator ID.
2156 * Returns a struct regulator corresponding to the regulator producer,
2157 * or IS_ERR() condition containing errno.
2159 * Use of supply names configured via set_consumer_device_supply() is
2160 * strongly encouraged. It is recommended that the supply name used
2161 * should match the name used for the supply and/or the relevant
2162 * device pins in the datasheet.
2164 struct regulator *regulator_get(struct device *dev, const char *id)
2166 return _regulator_get(dev, id, NORMAL_GET);
2168 EXPORT_SYMBOL_GPL(regulator_get);
2171 * regulator_get_exclusive - obtain exclusive access to a regulator.
2172 * @dev: device for regulator "consumer"
2173 * @id: Supply name or regulator ID.
2175 * Returns a struct regulator corresponding to the regulator producer,
2176 * or IS_ERR() condition containing errno. Other consumers will be
2177 * unable to obtain this regulator while this reference is held and the
2178 * use count for the regulator will be initialised to reflect the current
2179 * state of the regulator.
2181 * This is intended for use by consumers which cannot tolerate shared
2182 * use of the regulator such as those which need to force the
2183 * regulator off for correct operation of the hardware they are
2186 * Use of supply names configured via set_consumer_device_supply() is
2187 * strongly encouraged. It is recommended that the supply name used
2188 * should match the name used for the supply and/or the relevant
2189 * device pins in the datasheet.
2191 struct regulator *regulator_get_exclusive(struct device *dev, const char *id)
2193 return _regulator_get(dev, id, EXCLUSIVE_GET);
2195 EXPORT_SYMBOL_GPL(regulator_get_exclusive);
2198 * regulator_get_optional - obtain optional access to a regulator.
2199 * @dev: device for regulator "consumer"
2200 * @id: Supply name or regulator ID.
2202 * Returns a struct regulator corresponding to the regulator producer,
2203 * or IS_ERR() condition containing errno.
2205 * This is intended for use by consumers for devices which can have
2206 * some supplies unconnected in normal use, such as some MMC devices.
2207 * It can allow the regulator core to provide stub supplies for other
2208 * supplies requested using normal regulator_get() calls without
2209 * disrupting the operation of drivers that can handle absent
2212 * Use of supply names configured via set_consumer_device_supply() is
2213 * strongly encouraged. It is recommended that the supply name used
2214 * should match the name used for the supply and/or the relevant
2215 * device pins in the datasheet.
2217 struct regulator *regulator_get_optional(struct device *dev, const char *id)
2219 return _regulator_get(dev, id, OPTIONAL_GET);
2221 EXPORT_SYMBOL_GPL(regulator_get_optional);
2223 static void destroy_regulator(struct regulator *regulator)
2225 struct regulator_dev *rdev = regulator->rdev;
2227 debugfs_remove_recursive(regulator->debugfs);
2229 if (regulator->dev) {
2230 if (regulator->device_link)
2231 device_link_remove(regulator->dev, &rdev->dev);
2233 /* remove any sysfs entries */
2234 sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
2237 regulator_lock(rdev);
2238 list_del(®ulator->list);
2241 rdev->exclusive = 0;
2242 regulator_unlock(rdev);
2244 kfree_const(regulator->supply_name);
2248 /* regulator_list_mutex lock held by regulator_put() */
2249 static void _regulator_put(struct regulator *regulator)
2251 struct regulator_dev *rdev;
2253 if (IS_ERR_OR_NULL(regulator))
2256 lockdep_assert_held_once(®ulator_list_mutex);
2258 /* Docs say you must disable before calling regulator_put() */
2259 WARN_ON(regulator->enable_count);
2261 rdev = regulator->rdev;
2263 destroy_regulator(regulator);
2265 module_put(rdev->owner);
2266 put_device(&rdev->dev);
2270 * regulator_put - "free" the regulator source
2271 * @regulator: regulator source
2273 * Note: drivers must ensure that all regulator_enable calls made on this
2274 * regulator source are balanced by regulator_disable calls prior to calling
2277 void regulator_put(struct regulator *regulator)
2279 mutex_lock(®ulator_list_mutex);
2280 _regulator_put(regulator);
2281 mutex_unlock(®ulator_list_mutex);
2283 EXPORT_SYMBOL_GPL(regulator_put);
2286 * regulator_register_supply_alias - Provide device alias for supply lookup
2288 * @dev: device that will be given as the regulator "consumer"
2289 * @id: Supply name or regulator ID
2290 * @alias_dev: device that should be used to lookup the supply
2291 * @alias_id: Supply name or regulator ID that should be used to lookup the
2294 * All lookups for id on dev will instead be conducted for alias_id on
2297 int regulator_register_supply_alias(struct device *dev, const char *id,
2298 struct device *alias_dev,
2299 const char *alias_id)
2301 struct regulator_supply_alias *map;
2303 map = regulator_find_supply_alias(dev, id);
2307 map = kzalloc(sizeof(struct regulator_supply_alias), GFP_KERNEL);
2312 map->src_supply = id;
2313 map->alias_dev = alias_dev;
2314 map->alias_supply = alias_id;
2316 list_add(&map->list, ®ulator_supply_alias_list);
2318 pr_info("Adding alias for supply %s,%s -> %s,%s\n",
2319 id, dev_name(dev), alias_id, dev_name(alias_dev));
2323 EXPORT_SYMBOL_GPL(regulator_register_supply_alias);
2326 * regulator_unregister_supply_alias - Remove device alias
2328 * @dev: device that will be given as the regulator "consumer"
2329 * @id: Supply name or regulator ID
2331 * Remove a lookup alias if one exists for id on dev.
2333 void regulator_unregister_supply_alias(struct device *dev, const char *id)
2335 struct regulator_supply_alias *map;
2337 map = regulator_find_supply_alias(dev, id);
2339 list_del(&map->list);
2343 EXPORT_SYMBOL_GPL(regulator_unregister_supply_alias);
2346 * regulator_bulk_register_supply_alias - register multiple aliases
2348 * @dev: device that will be given as the regulator "consumer"
2349 * @id: List of supply names or regulator IDs
2350 * @alias_dev: device that should be used to lookup the supply
2351 * @alias_id: List of supply names or regulator IDs that should be used to
2353 * @num_id: Number of aliases to register
2355 * @return 0 on success, an errno on failure.
2357 * This helper function allows drivers to register several supply
2358 * aliases in one operation. If any of the aliases cannot be
2359 * registered any aliases that were registered will be removed
2360 * before returning to the caller.
2362 int regulator_bulk_register_supply_alias(struct device *dev,
2363 const char *const *id,
2364 struct device *alias_dev,
2365 const char *const *alias_id,
2371 for (i = 0; i < num_id; ++i) {
2372 ret = regulator_register_supply_alias(dev, id[i], alias_dev,
2382 "Failed to create supply alias %s,%s -> %s,%s\n",
2383 id[i], dev_name(dev), alias_id[i], dev_name(alias_dev));
2386 regulator_unregister_supply_alias(dev, id[i]);
2390 EXPORT_SYMBOL_GPL(regulator_bulk_register_supply_alias);
2393 * regulator_bulk_unregister_supply_alias - unregister multiple aliases
2395 * @dev: device that will be given as the regulator "consumer"
2396 * @id: List of supply names or regulator IDs
2397 * @num_id: Number of aliases to unregister
2399 * This helper function allows drivers to unregister several supply
2400 * aliases in one operation.
2402 void regulator_bulk_unregister_supply_alias(struct device *dev,
2403 const char *const *id,
2408 for (i = 0; i < num_id; ++i)
2409 regulator_unregister_supply_alias(dev, id[i]);
2411 EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias);
2414 /* Manage enable GPIO list. Same GPIO pin can be shared among regulators */
2415 static int regulator_ena_gpio_request(struct regulator_dev *rdev,
2416 const struct regulator_config *config)
2418 struct regulator_enable_gpio *pin, *new_pin;
2419 struct gpio_desc *gpiod;
2421 gpiod = config->ena_gpiod;
2422 new_pin = kzalloc(sizeof(*new_pin), GFP_KERNEL);
2424 mutex_lock(®ulator_list_mutex);
2426 list_for_each_entry(pin, ®ulator_ena_gpio_list, list) {
2427 if (pin->gpiod == gpiod) {
2428 rdev_dbg(rdev, "GPIO is already used\n");
2429 goto update_ena_gpio_to_rdev;
2433 if (new_pin == NULL) {
2434 mutex_unlock(®ulator_list_mutex);
2442 list_add(&pin->list, ®ulator_ena_gpio_list);
2444 update_ena_gpio_to_rdev:
2445 pin->request_count++;
2446 rdev->ena_pin = pin;
2448 mutex_unlock(®ulator_list_mutex);
2454 static void regulator_ena_gpio_free(struct regulator_dev *rdev)
2456 struct regulator_enable_gpio *pin, *n;
2461 /* Free the GPIO only in case of no use */
2462 list_for_each_entry_safe(pin, n, ®ulator_ena_gpio_list, list) {
2463 if (pin != rdev->ena_pin)
2466 if (--pin->request_count)
2469 gpiod_put(pin->gpiod);
2470 list_del(&pin->list);
2475 rdev->ena_pin = NULL;
2479 * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control
2480 * @rdev: regulator_dev structure
2481 * @enable: enable GPIO at initial use?
2483 * GPIO is enabled in case of initial use. (enable_count is 0)
2484 * GPIO is disabled when it is not shared any more. (enable_count <= 1)
2486 static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable)
2488 struct regulator_enable_gpio *pin = rdev->ena_pin;
2494 /* Enable GPIO at initial use */
2495 if (pin->enable_count == 0)
2496 gpiod_set_value_cansleep(pin->gpiod, 1);
2498 pin->enable_count++;
2500 if (pin->enable_count > 1) {
2501 pin->enable_count--;
2505 /* Disable GPIO if not used */
2506 if (pin->enable_count <= 1) {
2507 gpiod_set_value_cansleep(pin->gpiod, 0);
2508 pin->enable_count = 0;
2516 * _regulator_enable_delay - a delay helper function
2517 * @delay: time to delay in microseconds
2519 * Delay for the requested amount of time as per the guidelines in:
2521 * Documentation/timers/timers-howto.rst
2523 * The assumption here is that regulators will never be enabled in
2524 * atomic context and therefore sleeping functions can be used.
2526 static void _regulator_enable_delay(unsigned int delay)
2528 unsigned int ms = delay / 1000;
2529 unsigned int us = delay % 1000;
2533 * For small enough values, handle super-millisecond
2534 * delays in the usleep_range() call below.
2543 * Give the scheduler some room to coalesce with any other
2544 * wakeup sources. For delays shorter than 10 us, don't even
2545 * bother setting up high-resolution timers and just busy-
2549 usleep_range(us, us + 100);
2555 * _regulator_check_status_enabled
2557 * A helper function to check if the regulator status can be interpreted
2558 * as 'regulator is enabled'.
2559 * @rdev: the regulator device to check
2562 * * 1 - if status shows regulator is in enabled state
2563 * * 0 - if not enabled state
2564 * * Error Value - as received from ops->get_status()
2566 static inline int _regulator_check_status_enabled(struct regulator_dev *rdev)
2568 int ret = rdev->desc->ops->get_status(rdev);
2571 rdev_info(rdev, "get_status returned error: %d\n", ret);
2576 case REGULATOR_STATUS_OFF:
2577 case REGULATOR_STATUS_ERROR:
2578 case REGULATOR_STATUS_UNDEFINED:
2585 static int _regulator_do_enable(struct regulator_dev *rdev)
2589 /* Query before enabling in case configuration dependent. */
2590 ret = _regulator_get_enable_time(rdev);
2594 rdev_warn(rdev, "enable_time() failed: %pe\n", ERR_PTR(ret));
2598 trace_regulator_enable(rdev_get_name(rdev));
2600 if (rdev->desc->off_on_delay && rdev->last_off) {
2601 /* if needed, keep a distance of off_on_delay from last time
2602 * this regulator was disabled.
2604 ktime_t end = ktime_add_us(rdev->last_off, rdev->desc->off_on_delay);
2605 s64 remaining = ktime_us_delta(end, ktime_get());
2608 _regulator_enable_delay(remaining);
2611 if (rdev->ena_pin) {
2612 if (!rdev->ena_gpio_state) {
2613 ret = regulator_ena_gpio_ctrl(rdev, true);
2616 rdev->ena_gpio_state = 1;
2618 } else if (rdev->desc->ops->enable) {
2619 ret = rdev->desc->ops->enable(rdev);
2626 /* Allow the regulator to ramp; it would be useful to extend
2627 * this for bulk operations so that the regulators can ramp
2630 trace_regulator_enable_delay(rdev_get_name(rdev));
2632 /* If poll_enabled_time is set, poll upto the delay calculated
2633 * above, delaying poll_enabled_time uS to check if the regulator
2634 * actually got enabled.
2635 * If the regulator isn't enabled after enable_delay has
2636 * expired, return -ETIMEDOUT.
2638 if (rdev->desc->poll_enabled_time) {
2639 unsigned int time_remaining = delay;
2641 while (time_remaining > 0) {
2642 _regulator_enable_delay(rdev->desc->poll_enabled_time);
2644 if (rdev->desc->ops->get_status) {
2645 ret = _regulator_check_status_enabled(rdev);
2650 } else if (rdev->desc->ops->is_enabled(rdev))
2653 time_remaining -= rdev->desc->poll_enabled_time;
2656 if (time_remaining <= 0) {
2657 rdev_err(rdev, "Enabled check timed out\n");
2661 _regulator_enable_delay(delay);
2664 trace_regulator_enable_complete(rdev_get_name(rdev));
2670 * _regulator_handle_consumer_enable - handle that a consumer enabled
2671 * @regulator: regulator source
2673 * Some things on a regulator consumer (like the contribution towards total
2674 * load on the regulator) only have an effect when the consumer wants the
2675 * regulator enabled. Explained in example with two consumers of the same
2677 * consumer A: set_load(100); => total load = 0
2678 * consumer A: regulator_enable(); => total load = 100
2679 * consumer B: set_load(1000); => total load = 100
2680 * consumer B: regulator_enable(); => total load = 1100
2681 * consumer A: regulator_disable(); => total_load = 1000
2683 * This function (together with _regulator_handle_consumer_disable) is
2684 * responsible for keeping track of the refcount for a given regulator consumer
2685 * and applying / unapplying these things.
2687 * Returns 0 upon no error; -error upon error.
2689 static int _regulator_handle_consumer_enable(struct regulator *regulator)
2692 struct regulator_dev *rdev = regulator->rdev;
2694 lockdep_assert_held_once(&rdev->mutex.base);
2696 regulator->enable_count++;
2697 if (regulator->uA_load && regulator->enable_count == 1) {
2698 ret = drms_uA_update(rdev);
2700 regulator->enable_count--;
2708 * _regulator_handle_consumer_disable - handle that a consumer disabled
2709 * @regulator: regulator source
2711 * The opposite of _regulator_handle_consumer_enable().
2713 * Returns 0 upon no error; -error upon error.
2715 static int _regulator_handle_consumer_disable(struct regulator *regulator)
2717 struct regulator_dev *rdev = regulator->rdev;
2719 lockdep_assert_held_once(&rdev->mutex.base);
2721 if (!regulator->enable_count) {
2722 rdev_err(rdev, "Underflow of regulator enable count\n");
2726 regulator->enable_count--;
2727 if (regulator->uA_load && regulator->enable_count == 0)
2728 return drms_uA_update(rdev);
2733 /* locks held by regulator_enable() */
2734 static int _regulator_enable(struct regulator *regulator)
2736 struct regulator_dev *rdev = regulator->rdev;
2739 lockdep_assert_held_once(&rdev->mutex.base);
2741 if (rdev->use_count == 0 && rdev->supply) {
2742 ret = _regulator_enable(rdev->supply);
2747 /* balance only if there are regulators coupled */
2748 if (rdev->coupling_desc.n_coupled > 1) {
2749 ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON);
2751 goto err_disable_supply;
2754 ret = _regulator_handle_consumer_enable(regulator);
2756 goto err_disable_supply;
2758 if (rdev->use_count == 0) {
2760 * The regulator may already be enabled if it's not switchable
2763 ret = _regulator_is_enabled(rdev);
2764 if (ret == -EINVAL || ret == 0) {
2765 if (!regulator_ops_is_valid(rdev,
2766 REGULATOR_CHANGE_STATUS)) {
2768 goto err_consumer_disable;
2771 ret = _regulator_do_enable(rdev);
2773 goto err_consumer_disable;
2775 _notifier_call_chain(rdev, REGULATOR_EVENT_ENABLE,
2777 } else if (ret < 0) {
2778 rdev_err(rdev, "is_enabled() failed: %pe\n", ERR_PTR(ret));
2779 goto err_consumer_disable;
2781 /* Fallthrough on positive return values - already enabled */
2788 err_consumer_disable:
2789 _regulator_handle_consumer_disable(regulator);
2792 if (rdev->use_count == 0 && rdev->supply)
2793 _regulator_disable(rdev->supply);
2799 * regulator_enable - enable regulator output
2800 * @regulator: regulator source
2802 * Request that the regulator be enabled with the regulator output at
2803 * the predefined voltage or current value. Calls to regulator_enable()
2804 * must be balanced with calls to regulator_disable().
2806 * NOTE: the output value can be set by other drivers, boot loader or may be
2807 * hardwired in the regulator.
2809 int regulator_enable(struct regulator *regulator)
2811 struct regulator_dev *rdev = regulator->rdev;
2812 struct ww_acquire_ctx ww_ctx;
2815 regulator_lock_dependent(rdev, &ww_ctx);
2816 ret = _regulator_enable(regulator);
2817 regulator_unlock_dependent(rdev, &ww_ctx);
2821 EXPORT_SYMBOL_GPL(regulator_enable);
2823 static int _regulator_do_disable(struct regulator_dev *rdev)
2827 trace_regulator_disable(rdev_get_name(rdev));
2829 if (rdev->ena_pin) {
2830 if (rdev->ena_gpio_state) {
2831 ret = regulator_ena_gpio_ctrl(rdev, false);
2834 rdev->ena_gpio_state = 0;
2837 } else if (rdev->desc->ops->disable) {
2838 ret = rdev->desc->ops->disable(rdev);
2843 if (rdev->desc->off_on_delay)
2844 rdev->last_off = ktime_get();
2846 trace_regulator_disable_complete(rdev_get_name(rdev));
2851 /* locks held by regulator_disable() */
2852 static int _regulator_disable(struct regulator *regulator)
2854 struct regulator_dev *rdev = regulator->rdev;
2857 lockdep_assert_held_once(&rdev->mutex.base);
2859 if (WARN(rdev->use_count <= 0,
2860 "unbalanced disables for %s\n", rdev_get_name(rdev)))
2863 /* are we the last user and permitted to disable ? */
2864 if (rdev->use_count == 1 &&
2865 (rdev->constraints && !rdev->constraints->always_on)) {
2867 /* we are last user */
2868 if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS)) {
2869 ret = _notifier_call_chain(rdev,
2870 REGULATOR_EVENT_PRE_DISABLE,
2872 if (ret & NOTIFY_STOP_MASK)
2875 ret = _regulator_do_disable(rdev);
2877 rdev_err(rdev, "failed to disable: %pe\n", ERR_PTR(ret));
2878 _notifier_call_chain(rdev,
2879 REGULATOR_EVENT_ABORT_DISABLE,
2883 _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
2887 rdev->use_count = 0;
2888 } else if (rdev->use_count > 1) {
2893 ret = _regulator_handle_consumer_disable(regulator);
2895 if (ret == 0 && rdev->coupling_desc.n_coupled > 1)
2896 ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON);
2898 if (ret == 0 && rdev->use_count == 0 && rdev->supply)
2899 ret = _regulator_disable(rdev->supply);
2905 * regulator_disable - disable regulator output
2906 * @regulator: regulator source
2908 * Disable the regulator output voltage or current. Calls to
2909 * regulator_enable() must be balanced with calls to
2910 * regulator_disable().
2912 * NOTE: this will only disable the regulator output if no other consumer
2913 * devices have it enabled, the regulator device supports disabling and
2914 * machine constraints permit this operation.
2916 int regulator_disable(struct regulator *regulator)
2918 struct regulator_dev *rdev = regulator->rdev;
2919 struct ww_acquire_ctx ww_ctx;
2922 regulator_lock_dependent(rdev, &ww_ctx);
2923 ret = _regulator_disable(regulator);
2924 regulator_unlock_dependent(rdev, &ww_ctx);
2928 EXPORT_SYMBOL_GPL(regulator_disable);
2930 /* locks held by regulator_force_disable() */
2931 static int _regulator_force_disable(struct regulator_dev *rdev)
2935 lockdep_assert_held_once(&rdev->mutex.base);
2937 ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
2938 REGULATOR_EVENT_PRE_DISABLE, NULL);
2939 if (ret & NOTIFY_STOP_MASK)
2942 ret = _regulator_do_disable(rdev);
2944 rdev_err(rdev, "failed to force disable: %pe\n", ERR_PTR(ret));
2945 _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
2946 REGULATOR_EVENT_ABORT_DISABLE, NULL);
2950 _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
2951 REGULATOR_EVENT_DISABLE, NULL);
2957 * regulator_force_disable - force disable regulator output
2958 * @regulator: regulator source
2960 * Forcibly disable the regulator output voltage or current.
2961 * NOTE: this *will* disable the regulator output even if other consumer
2962 * devices have it enabled. This should be used for situations when device
2963 * damage will likely occur if the regulator is not disabled (e.g. over temp).
2965 int regulator_force_disable(struct regulator *regulator)
2967 struct regulator_dev *rdev = regulator->rdev;
2968 struct ww_acquire_ctx ww_ctx;
2971 regulator_lock_dependent(rdev, &ww_ctx);
2973 ret = _regulator_force_disable(regulator->rdev);
2975 if (rdev->coupling_desc.n_coupled > 1)
2976 regulator_balance_voltage(rdev, PM_SUSPEND_ON);
2978 if (regulator->uA_load) {
2979 regulator->uA_load = 0;
2980 ret = drms_uA_update(rdev);
2983 if (rdev->use_count != 0 && rdev->supply)
2984 _regulator_disable(rdev->supply);
2986 regulator_unlock_dependent(rdev, &ww_ctx);
2990 EXPORT_SYMBOL_GPL(regulator_force_disable);
2992 static void regulator_disable_work(struct work_struct *work)
2994 struct regulator_dev *rdev = container_of(work, struct regulator_dev,
2996 struct ww_acquire_ctx ww_ctx;
2998 struct regulator *regulator;
2999 int total_count = 0;
3001 regulator_lock_dependent(rdev, &ww_ctx);
3004 * Workqueue functions queue the new work instance while the previous
3005 * work instance is being processed. Cancel the queued work instance
3006 * as the work instance under processing does the job of the queued
3009 cancel_delayed_work(&rdev->disable_work);
3011 list_for_each_entry(regulator, &rdev->consumer_list, list) {
3012 count = regulator->deferred_disables;
3017 total_count += count;
3018 regulator->deferred_disables = 0;
3020 for (i = 0; i < count; i++) {
3021 ret = _regulator_disable(regulator);
3023 rdev_err(rdev, "Deferred disable failed: %pe\n",
3027 WARN_ON(!total_count);
3029 if (rdev->coupling_desc.n_coupled > 1)
3030 regulator_balance_voltage(rdev, PM_SUSPEND_ON);
3032 regulator_unlock_dependent(rdev, &ww_ctx);
3036 * regulator_disable_deferred - disable regulator output with delay
3037 * @regulator: regulator source
3038 * @ms: milliseconds until the regulator is disabled
3040 * Execute regulator_disable() on the regulator after a delay. This
3041 * is intended for use with devices that require some time to quiesce.
3043 * NOTE: this will only disable the regulator output if no other consumer
3044 * devices have it enabled, the regulator device supports disabling and
3045 * machine constraints permit this operation.
3047 int regulator_disable_deferred(struct regulator *regulator, int ms)
3049 struct regulator_dev *rdev = regulator->rdev;
3052 return regulator_disable(regulator);
3054 regulator_lock(rdev);
3055 regulator->deferred_disables++;
3056 mod_delayed_work(system_power_efficient_wq, &rdev->disable_work,
3057 msecs_to_jiffies(ms));
3058 regulator_unlock(rdev);
3062 EXPORT_SYMBOL_GPL(regulator_disable_deferred);
3064 static int _regulator_is_enabled(struct regulator_dev *rdev)
3066 /* A GPIO control always takes precedence */
3068 return rdev->ena_gpio_state;
3070 /* If we don't know then assume that the regulator is always on */
3071 if (!rdev->desc->ops->is_enabled)
3074 return rdev->desc->ops->is_enabled(rdev);
3077 static int _regulator_list_voltage(struct regulator_dev *rdev,
3078 unsigned selector, int lock)
3080 const struct regulator_ops *ops = rdev->desc->ops;
3083 if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
3084 return rdev->desc->fixed_uV;
3086 if (ops->list_voltage) {
3087 if (selector >= rdev->desc->n_voltages)
3089 if (selector < rdev->desc->linear_min_sel)
3092 regulator_lock(rdev);
3093 ret = ops->list_voltage(rdev, selector);
3095 regulator_unlock(rdev);
3096 } else if (rdev->is_switch && rdev->supply) {
3097 ret = _regulator_list_voltage(rdev->supply->rdev,
3104 if (ret < rdev->constraints->min_uV)
3106 else if (ret > rdev->constraints->max_uV)
3114 * regulator_is_enabled - is the regulator output enabled
3115 * @regulator: regulator source
3117 * Returns positive if the regulator driver backing the source/client
3118 * has requested that the device be enabled, zero if it hasn't, else a
3119 * negative errno code.
3121 * Note that the device backing this regulator handle can have multiple
3122 * users, so it might be enabled even if regulator_enable() was never
3123 * called for this particular source.
3125 int regulator_is_enabled(struct regulator *regulator)
3129 if (regulator->always_on)
3132 regulator_lock(regulator->rdev);
3133 ret = _regulator_is_enabled(regulator->rdev);
3134 regulator_unlock(regulator->rdev);
3138 EXPORT_SYMBOL_GPL(regulator_is_enabled);
3141 * regulator_count_voltages - count regulator_list_voltage() selectors
3142 * @regulator: regulator source
3144 * Returns number of selectors, or negative errno. Selectors are
3145 * numbered starting at zero, and typically correspond to bitfields
3146 * in hardware registers.
3148 int regulator_count_voltages(struct regulator *regulator)
3150 struct regulator_dev *rdev = regulator->rdev;
3152 if (rdev->desc->n_voltages)
3153 return rdev->desc->n_voltages;
3155 if (!rdev->is_switch || !rdev->supply)
3158 return regulator_count_voltages(rdev->supply);
3160 EXPORT_SYMBOL_GPL(regulator_count_voltages);
3163 * regulator_list_voltage - enumerate supported voltages
3164 * @regulator: regulator source
3165 * @selector: identify voltage to list
3166 * Context: can sleep
3168 * Returns a voltage that can be passed to @regulator_set_voltage(),
3169 * zero if this selector code can't be used on this system, or a
3172 int regulator_list_voltage(struct regulator *regulator, unsigned selector)
3174 return _regulator_list_voltage(regulator->rdev, selector, 1);
3176 EXPORT_SYMBOL_GPL(regulator_list_voltage);
3179 * regulator_get_regmap - get the regulator's register map
3180 * @regulator: regulator source
3182 * Returns the register map for the given regulator, or an ERR_PTR value
3183 * if the regulator doesn't use regmap.
3185 struct regmap *regulator_get_regmap(struct regulator *regulator)
3187 struct regmap *map = regulator->rdev->regmap;
3189 return map ? map : ERR_PTR(-EOPNOTSUPP);
3193 * regulator_get_hardware_vsel_register - get the HW voltage selector register
3194 * @regulator: regulator source
3195 * @vsel_reg: voltage selector register, output parameter
3196 * @vsel_mask: mask for voltage selector bitfield, output parameter
3198 * Returns the hardware register offset and bitmask used for setting the
3199 * regulator voltage. This might be useful when configuring voltage-scaling
3200 * hardware or firmware that can make I2C requests behind the kernel's back,
3203 * On success, the output parameters @vsel_reg and @vsel_mask are filled in
3204 * and 0 is returned, otherwise a negative errno is returned.
3206 int regulator_get_hardware_vsel_register(struct regulator *regulator,
3208 unsigned *vsel_mask)
3210 struct regulator_dev *rdev = regulator->rdev;
3211 const struct regulator_ops *ops = rdev->desc->ops;
3213 if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
3216 *vsel_reg = rdev->desc->vsel_reg;
3217 *vsel_mask = rdev->desc->vsel_mask;
3221 EXPORT_SYMBOL_GPL(regulator_get_hardware_vsel_register);
3224 * regulator_list_hardware_vsel - get the HW-specific register value for a selector
3225 * @regulator: regulator source
3226 * @selector: identify voltage to list
3228 * Converts the selector to a hardware-specific voltage selector that can be
3229 * directly written to the regulator registers. The address of the voltage
3230 * register can be determined by calling @regulator_get_hardware_vsel_register.
3232 * On error a negative errno is returned.
3234 int regulator_list_hardware_vsel(struct regulator *regulator,
3237 struct regulator_dev *rdev = regulator->rdev;
3238 const struct regulator_ops *ops = rdev->desc->ops;
3240 if (selector >= rdev->desc->n_voltages)
3242 if (selector < rdev->desc->linear_min_sel)
3244 if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
3249 EXPORT_SYMBOL_GPL(regulator_list_hardware_vsel);
3252 * regulator_get_linear_step - return the voltage step size between VSEL values
3253 * @regulator: regulator source
3255 * Returns the voltage step size between VSEL values for linear
3256 * regulators, or return 0 if the regulator isn't a linear regulator.
3258 unsigned int regulator_get_linear_step(struct regulator *regulator)
3260 struct regulator_dev *rdev = regulator->rdev;
3262 return rdev->desc->uV_step;
3264 EXPORT_SYMBOL_GPL(regulator_get_linear_step);
3267 * regulator_is_supported_voltage - check if a voltage range can be supported
3269 * @regulator: Regulator to check.
3270 * @min_uV: Minimum required voltage in uV.
3271 * @max_uV: Maximum required voltage in uV.
3273 * Returns a boolean.
3275 int regulator_is_supported_voltage(struct regulator *regulator,
3276 int min_uV, int max_uV)
3278 struct regulator_dev *rdev = regulator->rdev;
3279 int i, voltages, ret;
3281 /* If we can't change voltage check the current voltage */
3282 if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
3283 ret = regulator_get_voltage(regulator);
3285 return min_uV <= ret && ret <= max_uV;
3290 /* Any voltage within constrains range is fine? */
3291 if (rdev->desc->continuous_voltage_range)
3292 return min_uV >= rdev->constraints->min_uV &&
3293 max_uV <= rdev->constraints->max_uV;
3295 ret = regulator_count_voltages(regulator);
3300 for (i = 0; i < voltages; i++) {
3301 ret = regulator_list_voltage(regulator, i);
3303 if (ret >= min_uV && ret <= max_uV)
3309 EXPORT_SYMBOL_GPL(regulator_is_supported_voltage);
3311 static int regulator_map_voltage(struct regulator_dev *rdev, int min_uV,
3314 const struct regulator_desc *desc = rdev->desc;
3316 if (desc->ops->map_voltage)
3317 return desc->ops->map_voltage(rdev, min_uV, max_uV);
3319 if (desc->ops->list_voltage == regulator_list_voltage_linear)
3320 return regulator_map_voltage_linear(rdev, min_uV, max_uV);
3322 if (desc->ops->list_voltage == regulator_list_voltage_linear_range)
3323 return regulator_map_voltage_linear_range(rdev, min_uV, max_uV);
3325 if (desc->ops->list_voltage ==
3326 regulator_list_voltage_pickable_linear_range)
3327 return regulator_map_voltage_pickable_linear_range(rdev,
3330 return regulator_map_voltage_iterate(rdev, min_uV, max_uV);
3333 static int _regulator_call_set_voltage(struct regulator_dev *rdev,
3334 int min_uV, int max_uV,
3337 struct pre_voltage_change_data data;
3340 data.old_uV = regulator_get_voltage_rdev(rdev);
3341 data.min_uV = min_uV;
3342 data.max_uV = max_uV;
3343 ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE,
3345 if (ret & NOTIFY_STOP_MASK)
3348 ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV, selector);
3352 _notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE,
3353 (void *)data.old_uV);
3358 static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev,
3359 int uV, unsigned selector)
3361 struct pre_voltage_change_data data;
3364 data.old_uV = regulator_get_voltage_rdev(rdev);
3367 ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE,
3369 if (ret & NOTIFY_STOP_MASK)
3372 ret = rdev->desc->ops->set_voltage_sel(rdev, selector);
3376 _notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE,
3377 (void *)data.old_uV);
3382 static int _regulator_set_voltage_sel_step(struct regulator_dev *rdev,
3383 int uV, int new_selector)
3385 const struct regulator_ops *ops = rdev->desc->ops;
3386 int diff, old_sel, curr_sel, ret;
3388 /* Stepping is only needed if the regulator is enabled. */
3389 if (!_regulator_is_enabled(rdev))
3392 if (!ops->get_voltage_sel)
3395 old_sel = ops->get_voltage_sel(rdev);
3399 diff = new_selector - old_sel;
3401 return 0; /* No change needed. */
3405 for (curr_sel = old_sel + rdev->desc->vsel_step;
3406 curr_sel < new_selector;
3407 curr_sel += rdev->desc->vsel_step) {
3409 * Call the callback directly instead of using
3410 * _regulator_call_set_voltage_sel() as we don't
3411 * want to notify anyone yet. Same in the branch
3414 ret = ops->set_voltage_sel(rdev, curr_sel);
3419 /* Stepping down. */
3420 for (curr_sel = old_sel - rdev->desc->vsel_step;
3421 curr_sel > new_selector;
3422 curr_sel -= rdev->desc->vsel_step) {
3423 ret = ops->set_voltage_sel(rdev, curr_sel);
3430 /* The final selector will trigger the notifiers. */
3431 return _regulator_call_set_voltage_sel(rdev, uV, new_selector);
3435 * At least try to return to the previous voltage if setting a new
3438 (void)ops->set_voltage_sel(rdev, old_sel);
3442 static int _regulator_set_voltage_time(struct regulator_dev *rdev,
3443 int old_uV, int new_uV)
3445 unsigned int ramp_delay = 0;
3447 if (rdev->constraints->ramp_delay)
3448 ramp_delay = rdev->constraints->ramp_delay;
3449 else if (rdev->desc->ramp_delay)
3450 ramp_delay = rdev->desc->ramp_delay;
3451 else if (rdev->constraints->settling_time)
3452 return rdev->constraints->settling_time;
3453 else if (rdev->constraints->settling_time_up &&
3455 return rdev->constraints->settling_time_up;
3456 else if (rdev->constraints->settling_time_down &&
3458 return rdev->constraints->settling_time_down;
3460 if (ramp_delay == 0) {
3461 rdev_dbg(rdev, "ramp_delay not set\n");
3465 return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay);
3468 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
3469 int min_uV, int max_uV)
3474 unsigned int selector;
3475 int old_selector = -1;
3476 const struct regulator_ops *ops = rdev->desc->ops;
3477 int old_uV = regulator_get_voltage_rdev(rdev);
3479 trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV);
3481 min_uV += rdev->constraints->uV_offset;
3482 max_uV += rdev->constraints->uV_offset;
3485 * If we can't obtain the old selector there is not enough
3486 * info to call set_voltage_time_sel().
3488 if (_regulator_is_enabled(rdev) &&
3489 ops->set_voltage_time_sel && ops->get_voltage_sel) {
3490 old_selector = ops->get_voltage_sel(rdev);
3491 if (old_selector < 0)
3492 return old_selector;
3495 if (ops->set_voltage) {
3496 ret = _regulator_call_set_voltage(rdev, min_uV, max_uV,
3500 if (ops->list_voltage)
3501 best_val = ops->list_voltage(rdev,
3504 best_val = regulator_get_voltage_rdev(rdev);
3507 } else if (ops->set_voltage_sel) {
3508 ret = regulator_map_voltage(rdev, min_uV, max_uV);
3510 best_val = ops->list_voltage(rdev, ret);
3511 if (min_uV <= best_val && max_uV >= best_val) {
3513 if (old_selector == selector)
3515 else if (rdev->desc->vsel_step)
3516 ret = _regulator_set_voltage_sel_step(
3517 rdev, best_val, selector);
3519 ret = _regulator_call_set_voltage_sel(
3520 rdev, best_val, selector);
3532 if (ops->set_voltage_time_sel) {
3534 * Call set_voltage_time_sel if successfully obtained
3537 if (old_selector >= 0 && old_selector != selector)
3538 delay = ops->set_voltage_time_sel(rdev, old_selector,
3541 if (old_uV != best_val) {
3542 if (ops->set_voltage_time)
3543 delay = ops->set_voltage_time(rdev, old_uV,
3546 delay = _regulator_set_voltage_time(rdev,
3553 rdev_warn(rdev, "failed to get delay: %pe\n", ERR_PTR(delay));
3557 /* Insert any necessary delays */
3558 if (delay >= 1000) {
3559 mdelay(delay / 1000);
3560 udelay(delay % 1000);
3565 if (best_val >= 0) {
3566 unsigned long data = best_val;
3568 _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
3573 trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val);
3578 static int _regulator_do_set_suspend_voltage(struct regulator_dev *rdev,
3579 int min_uV, int max_uV, suspend_state_t state)
3581 struct regulator_state *rstate;
3584 rstate = regulator_get_suspend_state(rdev, state);
3588 if (min_uV < rstate->min_uV)
3589 min_uV = rstate->min_uV;
3590 if (max_uV > rstate->max_uV)
3591 max_uV = rstate->max_uV;
3593 sel = regulator_map_voltage(rdev, min_uV, max_uV);
3597 uV = rdev->desc->ops->list_voltage(rdev, sel);
3598 if (uV >= min_uV && uV <= max_uV)
3604 static int regulator_set_voltage_unlocked(struct regulator *regulator,
3605 int min_uV, int max_uV,
3606 suspend_state_t state)
3608 struct regulator_dev *rdev = regulator->rdev;
3609 struct regulator_voltage *voltage = ®ulator->voltage[state];
3611 int old_min_uV, old_max_uV;
3614 /* If we're setting the same range as last time the change
3615 * should be a noop (some cpufreq implementations use the same
3616 * voltage for multiple frequencies, for example).
3618 if (voltage->min_uV == min_uV && voltage->max_uV == max_uV)
3621 /* If we're trying to set a range that overlaps the current voltage,
3622 * return successfully even though the regulator does not support
3623 * changing the voltage.
3625 if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
3626 current_uV = regulator_get_voltage_rdev(rdev);
3627 if (min_uV <= current_uV && current_uV <= max_uV) {
3628 voltage->min_uV = min_uV;
3629 voltage->max_uV = max_uV;
3635 if (!rdev->desc->ops->set_voltage &&
3636 !rdev->desc->ops->set_voltage_sel) {
3641 /* constraints check */
3642 ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
3646 /* restore original values in case of error */
3647 old_min_uV = voltage->min_uV;
3648 old_max_uV = voltage->max_uV;
3649 voltage->min_uV = min_uV;
3650 voltage->max_uV = max_uV;
3652 /* for not coupled regulators this will just set the voltage */
3653 ret = regulator_balance_voltage(rdev, state);
3655 voltage->min_uV = old_min_uV;
3656 voltage->max_uV = old_max_uV;
3663 int regulator_set_voltage_rdev(struct regulator_dev *rdev, int min_uV,
3664 int max_uV, suspend_state_t state)
3666 int best_supply_uV = 0;
3667 int supply_change_uV = 0;
3671 regulator_ops_is_valid(rdev->supply->rdev,
3672 REGULATOR_CHANGE_VOLTAGE) &&
3673 (rdev->desc->min_dropout_uV || !(rdev->desc->ops->get_voltage ||
3674 rdev->desc->ops->get_voltage_sel))) {
3675 int current_supply_uV;
3678 selector = regulator_map_voltage(rdev, min_uV, max_uV);
3684 best_supply_uV = _regulator_list_voltage(rdev, selector, 0);
3685 if (best_supply_uV < 0) {
3686 ret = best_supply_uV;
3690 best_supply_uV += rdev->desc->min_dropout_uV;
3692 current_supply_uV = regulator_get_voltage_rdev(rdev->supply->rdev);
3693 if (current_supply_uV < 0) {
3694 ret = current_supply_uV;
3698 supply_change_uV = best_supply_uV - current_supply_uV;
3701 if (supply_change_uV > 0) {
3702 ret = regulator_set_voltage_unlocked(rdev->supply,
3703 best_supply_uV, INT_MAX, state);
3705 dev_err(&rdev->dev, "Failed to increase supply voltage: %pe\n",
3711 if (state == PM_SUSPEND_ON)
3712 ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
3714 ret = _regulator_do_set_suspend_voltage(rdev, min_uV,
3719 if (supply_change_uV < 0) {
3720 ret = regulator_set_voltage_unlocked(rdev->supply,
3721 best_supply_uV, INT_MAX, state);
3723 dev_warn(&rdev->dev, "Failed to decrease supply voltage: %pe\n",
3725 /* No need to fail here */
3732 EXPORT_SYMBOL_GPL(regulator_set_voltage_rdev);
3734 static int regulator_limit_voltage_step(struct regulator_dev *rdev,
3735 int *current_uV, int *min_uV)
3737 struct regulation_constraints *constraints = rdev->constraints;
3739 /* Limit voltage change only if necessary */
3740 if (!constraints->max_uV_step || !_regulator_is_enabled(rdev))
3743 if (*current_uV < 0) {
3744 *current_uV = regulator_get_voltage_rdev(rdev);
3746 if (*current_uV < 0)
3750 if (abs(*current_uV - *min_uV) <= constraints->max_uV_step)
3753 /* Clamp target voltage within the given step */
3754 if (*current_uV < *min_uV)
3755 *min_uV = min(*current_uV + constraints->max_uV_step,
3758 *min_uV = max(*current_uV - constraints->max_uV_step,
3764 static int regulator_get_optimal_voltage(struct regulator_dev *rdev,
3766 int *min_uV, int *max_uV,
3767 suspend_state_t state,
3770 struct coupling_desc *c_desc = &rdev->coupling_desc;
3771 struct regulator_dev **c_rdevs = c_desc->coupled_rdevs;
3772 struct regulation_constraints *constraints = rdev->constraints;
3773 int desired_min_uV = 0, desired_max_uV = INT_MAX;
3774 int max_current_uV = 0, min_current_uV = INT_MAX;
3775 int highest_min_uV = 0, target_uV, possible_uV;
3776 int i, ret, max_spread;
3782 * If there are no coupled regulators, simply set the voltage
3783 * demanded by consumers.
3785 if (n_coupled == 1) {
3787 * If consumers don't provide any demands, set voltage
3790 desired_min_uV = constraints->min_uV;
3791 desired_max_uV = constraints->max_uV;
3793 ret = regulator_check_consumers(rdev,
3795 &desired_max_uV, state);
3799 possible_uV = desired_min_uV;
3805 /* Find highest min desired voltage */
3806 for (i = 0; i < n_coupled; i++) {
3808 int tmp_max = INT_MAX;
3810 lockdep_assert_held_once(&c_rdevs[i]->mutex.base);
3812 ret = regulator_check_consumers(c_rdevs[i],
3818 ret = regulator_check_voltage(c_rdevs[i], &tmp_min, &tmp_max);
3822 highest_min_uV = max(highest_min_uV, tmp_min);
3825 desired_min_uV = tmp_min;
3826 desired_max_uV = tmp_max;
3830 max_spread = constraints->max_spread[0];
3833 * Let target_uV be equal to the desired one if possible.
3834 * If not, set it to minimum voltage, allowed by other coupled
3837 target_uV = max(desired_min_uV, highest_min_uV - max_spread);
3840 * Find min and max voltages, which currently aren't violating
3843 for (i = 1; i < n_coupled; i++) {
3846 if (!_regulator_is_enabled(c_rdevs[i]))
3849 tmp_act = regulator_get_voltage_rdev(c_rdevs[i]);
3853 min_current_uV = min(tmp_act, min_current_uV);
3854 max_current_uV = max(tmp_act, max_current_uV);
3857 /* There aren't any other regulators enabled */
3858 if (max_current_uV == 0) {
3859 possible_uV = target_uV;
3862 * Correct target voltage, so as it currently isn't
3863 * violating max_spread
3865 possible_uV = max(target_uV, max_current_uV - max_spread);
3866 possible_uV = min(possible_uV, min_current_uV + max_spread);
3869 if (possible_uV > desired_max_uV)
3872 done = (possible_uV == target_uV);
3873 desired_min_uV = possible_uV;
3876 /* Apply max_uV_step constraint if necessary */
3877 if (state == PM_SUSPEND_ON) {
3878 ret = regulator_limit_voltage_step(rdev, current_uV,
3887 /* Set current_uV if wasn't done earlier in the code and if necessary */
3888 if (n_coupled > 1 && *current_uV == -1) {
3890 if (_regulator_is_enabled(rdev)) {
3891 ret = regulator_get_voltage_rdev(rdev);
3897 *current_uV = desired_min_uV;
3901 *min_uV = desired_min_uV;
3902 *max_uV = desired_max_uV;
3907 int regulator_do_balance_voltage(struct regulator_dev *rdev,
3908 suspend_state_t state, bool skip_coupled)
3910 struct regulator_dev **c_rdevs;
3911 struct regulator_dev *best_rdev;
3912 struct coupling_desc *c_desc = &rdev->coupling_desc;
3913 int i, ret, n_coupled, best_min_uV, best_max_uV, best_c_rdev;
3914 unsigned int delta, best_delta;
3915 unsigned long c_rdev_done = 0;
3916 bool best_c_rdev_done;
3918 c_rdevs = c_desc->coupled_rdevs;
3919 n_coupled = skip_coupled ? 1 : c_desc->n_coupled;
3922 * Find the best possible voltage change on each loop. Leave the loop
3923 * if there isn't any possible change.
3926 best_c_rdev_done = false;
3934 * Find highest difference between optimal voltage
3935 * and current voltage.
3937 for (i = 0; i < n_coupled; i++) {
3939 * optimal_uV is the best voltage that can be set for
3940 * i-th regulator at the moment without violating
3941 * max_spread constraint in order to balance
3942 * the coupled voltages.
3944 int optimal_uV = 0, optimal_max_uV = 0, current_uV = 0;
3946 if (test_bit(i, &c_rdev_done))
3949 ret = regulator_get_optimal_voltage(c_rdevs[i],
3957 delta = abs(optimal_uV - current_uV);
3959 if (delta && best_delta <= delta) {
3960 best_c_rdev_done = ret;
3962 best_rdev = c_rdevs[i];
3963 best_min_uV = optimal_uV;
3964 best_max_uV = optimal_max_uV;
3969 /* Nothing to change, return successfully */
3975 ret = regulator_set_voltage_rdev(best_rdev, best_min_uV,
3976 best_max_uV, state);
3981 if (best_c_rdev_done)
3982 set_bit(best_c_rdev, &c_rdev_done);
3984 } while (n_coupled > 1);
3990 static int regulator_balance_voltage(struct regulator_dev *rdev,
3991 suspend_state_t state)
3993 struct coupling_desc *c_desc = &rdev->coupling_desc;
3994 struct regulator_coupler *coupler = c_desc->coupler;
3995 bool skip_coupled = false;
3998 * If system is in a state other than PM_SUSPEND_ON, don't check
3999 * other coupled regulators.
4001 if (state != PM_SUSPEND_ON)
4002 skip_coupled = true;
4004 if (c_desc->n_resolved < c_desc->n_coupled) {
4005 rdev_err(rdev, "Not all coupled regulators registered\n");
4009 /* Invoke custom balancer for customized couplers */
4010 if (coupler && coupler->balance_voltage)
4011 return coupler->balance_voltage(coupler, rdev, state);
4013 return regulator_do_balance_voltage(rdev, state, skip_coupled);
4017 * regulator_set_voltage - set regulator output voltage
4018 * @regulator: regulator source
4019 * @min_uV: Minimum required voltage in uV
4020 * @max_uV: Maximum acceptable voltage in uV
4022 * Sets a voltage regulator to the desired output voltage. This can be set
4023 * during any regulator state. IOW, regulator can be disabled or enabled.
4025 * If the regulator is enabled then the voltage will change to the new value
4026 * immediately otherwise if the regulator is disabled the regulator will
4027 * output at the new voltage when enabled.
4029 * NOTE: If the regulator is shared between several devices then the lowest
4030 * request voltage that meets the system constraints will be used.
4031 * Regulator system constraints must be set for this regulator before
4032 * calling this function otherwise this call will fail.
4034 int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
4036 struct ww_acquire_ctx ww_ctx;
4039 regulator_lock_dependent(regulator->rdev, &ww_ctx);
4041 ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV,
4044 regulator_unlock_dependent(regulator->rdev, &ww_ctx);
4048 EXPORT_SYMBOL_GPL(regulator_set_voltage);
4050 static inline int regulator_suspend_toggle(struct regulator_dev *rdev,
4051 suspend_state_t state, bool en)
4053 struct regulator_state *rstate;
4055 rstate = regulator_get_suspend_state(rdev, state);
4059 if (!rstate->changeable)
4062 rstate->enabled = (en) ? ENABLE_IN_SUSPEND : DISABLE_IN_SUSPEND;
4067 int regulator_suspend_enable(struct regulator_dev *rdev,
4068 suspend_state_t state)
4070 return regulator_suspend_toggle(rdev, state, true);
4072 EXPORT_SYMBOL_GPL(regulator_suspend_enable);
4074 int regulator_suspend_disable(struct regulator_dev *rdev,
4075 suspend_state_t state)
4077 struct regulator *regulator;
4078 struct regulator_voltage *voltage;
4081 * if any consumer wants this regulator device keeping on in
4082 * suspend states, don't set it as disabled.
4084 list_for_each_entry(regulator, &rdev->consumer_list, list) {
4085 voltage = ®ulator->voltage[state];
4086 if (voltage->min_uV || voltage->max_uV)
4090 return regulator_suspend_toggle(rdev, state, false);
4092 EXPORT_SYMBOL_GPL(regulator_suspend_disable);
4094 static int _regulator_set_suspend_voltage(struct regulator *regulator,
4095 int min_uV, int max_uV,
4096 suspend_state_t state)
4098 struct regulator_dev *rdev = regulator->rdev;
4099 struct regulator_state *rstate;
4101 rstate = regulator_get_suspend_state(rdev, state);
4105 if (rstate->min_uV == rstate->max_uV) {
4106 rdev_err(rdev, "The suspend voltage can't be changed!\n");
4110 return regulator_set_voltage_unlocked(regulator, min_uV, max_uV, state);
4113 int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV,
4114 int max_uV, suspend_state_t state)
4116 struct ww_acquire_ctx ww_ctx;
4119 /* PM_SUSPEND_ON is handled by regulator_set_voltage() */
4120 if (regulator_check_states(state) || state == PM_SUSPEND_ON)
4123 regulator_lock_dependent(regulator->rdev, &ww_ctx);
4125 ret = _regulator_set_suspend_voltage(regulator, min_uV,
4128 regulator_unlock_dependent(regulator->rdev, &ww_ctx);
4132 EXPORT_SYMBOL_GPL(regulator_set_suspend_voltage);
4135 * regulator_set_voltage_time - get raise/fall time
4136 * @regulator: regulator source
4137 * @old_uV: starting voltage in microvolts
4138 * @new_uV: target voltage in microvolts
4140 * Provided with the starting and ending voltage, this function attempts to
4141 * calculate the time in microseconds required to rise or fall to this new
4144 int regulator_set_voltage_time(struct regulator *regulator,
4145 int old_uV, int new_uV)
4147 struct regulator_dev *rdev = regulator->rdev;
4148 const struct regulator_ops *ops = rdev->desc->ops;
4154 if (ops->set_voltage_time)
4155 return ops->set_voltage_time(rdev, old_uV, new_uV);
4156 else if (!ops->set_voltage_time_sel)
4157 return _regulator_set_voltage_time(rdev, old_uV, new_uV);
4159 /* Currently requires operations to do this */
4160 if (!ops->list_voltage || !rdev->desc->n_voltages)
4163 for (i = 0; i < rdev->desc->n_voltages; i++) {
4164 /* We only look for exact voltage matches here */
4165 if (i < rdev->desc->linear_min_sel)
4168 if (old_sel >= 0 && new_sel >= 0)
4171 voltage = regulator_list_voltage(regulator, i);
4176 if (voltage == old_uV)
4178 if (voltage == new_uV)
4182 if (old_sel < 0 || new_sel < 0)
4185 return ops->set_voltage_time_sel(rdev, old_sel, new_sel);
4187 EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
4190 * regulator_set_voltage_time_sel - get raise/fall time
4191 * @rdev: regulator source device
4192 * @old_selector: selector for starting voltage
4193 * @new_selector: selector for target voltage
4195 * Provided with the starting and target voltage selectors, this function
4196 * returns time in microseconds required to rise or fall to this new voltage
4198 * Drivers providing ramp_delay in regulation_constraints can use this as their
4199 * set_voltage_time_sel() operation.
4201 int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
4202 unsigned int old_selector,
4203 unsigned int new_selector)
4205 int old_volt, new_volt;
4208 if (!rdev->desc->ops->list_voltage)
4211 old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
4212 new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);
4214 if (rdev->desc->ops->set_voltage_time)
4215 return rdev->desc->ops->set_voltage_time(rdev, old_volt,
4218 return _regulator_set_voltage_time(rdev, old_volt, new_volt);
4220 EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
4222 int regulator_sync_voltage_rdev(struct regulator_dev *rdev)
4226 regulator_lock(rdev);
4228 if (!rdev->desc->ops->set_voltage &&
4229 !rdev->desc->ops->set_voltage_sel) {
4234 /* balance only, if regulator is coupled */
4235 if (rdev->coupling_desc.n_coupled > 1)
4236 ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON);
4241 regulator_unlock(rdev);
4246 * regulator_sync_voltage - re-apply last regulator output voltage
4247 * @regulator: regulator source
4249 * Re-apply the last configured voltage. This is intended to be used
4250 * where some external control source the consumer is cooperating with
4251 * has caused the configured voltage to change.
4253 int regulator_sync_voltage(struct regulator *regulator)
4255 struct regulator_dev *rdev = regulator->rdev;
4256 struct regulator_voltage *voltage = ®ulator->voltage[PM_SUSPEND_ON];
4257 int ret, min_uV, max_uV;
4259 regulator_lock(rdev);
4261 if (!rdev->desc->ops->set_voltage &&
4262 !rdev->desc->ops->set_voltage_sel) {
4267 /* This is only going to work if we've had a voltage configured. */
4268 if (!voltage->min_uV && !voltage->max_uV) {
4273 min_uV = voltage->min_uV;
4274 max_uV = voltage->max_uV;
4276 /* This should be a paranoia check... */
4277 ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
4281 ret = regulator_check_consumers(rdev, &min_uV, &max_uV, 0);
4285 /* balance only, if regulator is coupled */
4286 if (rdev->coupling_desc.n_coupled > 1)
4287 ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON);
4289 ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
4292 regulator_unlock(rdev);
4295 EXPORT_SYMBOL_GPL(regulator_sync_voltage);
4297 int regulator_get_voltage_rdev(struct regulator_dev *rdev)
4302 if (rdev->desc->ops->get_bypass) {
4303 ret = rdev->desc->ops->get_bypass(rdev, &bypassed);
4307 /* if bypassed the regulator must have a supply */
4308 if (!rdev->supply) {
4310 "bypassed regulator has no supply!\n");
4311 return -EPROBE_DEFER;
4314 return regulator_get_voltage_rdev(rdev->supply->rdev);
4318 if (rdev->desc->ops->get_voltage_sel) {
4319 sel = rdev->desc->ops->get_voltage_sel(rdev);
4322 ret = rdev->desc->ops->list_voltage(rdev, sel);
4323 } else if (rdev->desc->ops->get_voltage) {
4324 ret = rdev->desc->ops->get_voltage(rdev);
4325 } else if (rdev->desc->ops->list_voltage) {
4326 ret = rdev->desc->ops->list_voltage(rdev, 0);
4327 } else if (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1)) {
4328 ret = rdev->desc->fixed_uV;
4329 } else if (rdev->supply) {
4330 ret = regulator_get_voltage_rdev(rdev->supply->rdev);
4331 } else if (rdev->supply_name) {
4332 return -EPROBE_DEFER;
4339 return ret - rdev->constraints->uV_offset;
4341 EXPORT_SYMBOL_GPL(regulator_get_voltage_rdev);
4344 * regulator_get_voltage - get regulator output voltage
4345 * @regulator: regulator source
4347 * This returns the current regulator voltage in uV.
4349 * NOTE: If the regulator is disabled it will return the voltage value. This
4350 * function should not be used to determine regulator state.
4352 int regulator_get_voltage(struct regulator *regulator)
4354 struct ww_acquire_ctx ww_ctx;
4357 regulator_lock_dependent(regulator->rdev, &ww_ctx);
4358 ret = regulator_get_voltage_rdev(regulator->rdev);
4359 regulator_unlock_dependent(regulator->rdev, &ww_ctx);
4363 EXPORT_SYMBOL_GPL(regulator_get_voltage);
4366 * regulator_set_current_limit - set regulator output current limit
4367 * @regulator: regulator source
4368 * @min_uA: Minimum supported current in uA
4369 * @max_uA: Maximum supported current in uA
4371 * Sets current sink to the desired output current. This can be set during
4372 * any regulator state. IOW, regulator can be disabled or enabled.
4374 * If the regulator is enabled then the current will change to the new value
4375 * immediately otherwise if the regulator is disabled the regulator will
4376 * output at the new current when enabled.
4378 * NOTE: Regulator system constraints must be set for this regulator before
4379 * calling this function otherwise this call will fail.
4381 int regulator_set_current_limit(struct regulator *regulator,
4382 int min_uA, int max_uA)
4384 struct regulator_dev *rdev = regulator->rdev;
4387 regulator_lock(rdev);
4390 if (!rdev->desc->ops->set_current_limit) {
4395 /* constraints check */
4396 ret = regulator_check_current_limit(rdev, &min_uA, &max_uA);
4400 ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA);
4402 regulator_unlock(rdev);
4405 EXPORT_SYMBOL_GPL(regulator_set_current_limit);
4407 static int _regulator_get_current_limit_unlocked(struct regulator_dev *rdev)
4410 if (!rdev->desc->ops->get_current_limit)
4413 return rdev->desc->ops->get_current_limit(rdev);
4416 static int _regulator_get_current_limit(struct regulator_dev *rdev)
4420 regulator_lock(rdev);
4421 ret = _regulator_get_current_limit_unlocked(rdev);
4422 regulator_unlock(rdev);
4428 * regulator_get_current_limit - get regulator output current
4429 * @regulator: regulator source
4431 * This returns the current supplied by the specified current sink in uA.
4433 * NOTE: If the regulator is disabled it will return the current value. This
4434 * function should not be used to determine regulator state.
4436 int regulator_get_current_limit(struct regulator *regulator)
4438 return _regulator_get_current_limit(regulator->rdev);
4440 EXPORT_SYMBOL_GPL(regulator_get_current_limit);
4443 * regulator_set_mode - set regulator operating mode
4444 * @regulator: regulator source
4445 * @mode: operating mode - one of the REGULATOR_MODE constants
4447 * Set regulator operating mode to increase regulator efficiency or improve
4448 * regulation performance.
4450 * NOTE: Regulator system constraints must be set for this regulator before
4451 * calling this function otherwise this call will fail.
4453 int regulator_set_mode(struct regulator *regulator, unsigned int mode)
4455 struct regulator_dev *rdev = regulator->rdev;
4457 int regulator_curr_mode;
4459 regulator_lock(rdev);
4462 if (!rdev->desc->ops->set_mode) {
4467 /* return if the same mode is requested */
4468 if (rdev->desc->ops->get_mode) {
4469 regulator_curr_mode = rdev->desc->ops->get_mode(rdev);
4470 if (regulator_curr_mode == mode) {
4476 /* constraints check */
4477 ret = regulator_mode_constrain(rdev, &mode);
4481 ret = rdev->desc->ops->set_mode(rdev, mode);
4483 regulator_unlock(rdev);
4486 EXPORT_SYMBOL_GPL(regulator_set_mode);
4488 static unsigned int _regulator_get_mode_unlocked(struct regulator_dev *rdev)
4491 if (!rdev->desc->ops->get_mode)
4494 return rdev->desc->ops->get_mode(rdev);
4497 static unsigned int _regulator_get_mode(struct regulator_dev *rdev)
4501 regulator_lock(rdev);
4502 ret = _regulator_get_mode_unlocked(rdev);
4503 regulator_unlock(rdev);
4509 * regulator_get_mode - get regulator operating mode
4510 * @regulator: regulator source
4512 * Get the current regulator operating mode.
4514 unsigned int regulator_get_mode(struct regulator *regulator)
4516 return _regulator_get_mode(regulator->rdev);
4518 EXPORT_SYMBOL_GPL(regulator_get_mode);
4520 static int rdev_get_cached_err_flags(struct regulator_dev *rdev)
4524 if (rdev->use_cached_err) {
4525 spin_lock(&rdev->err_lock);
4526 ret = rdev->cached_err;
4527 spin_unlock(&rdev->err_lock);
4532 static int _regulator_get_error_flags(struct regulator_dev *rdev,
4533 unsigned int *flags)
4535 int cached_flags, ret = 0;
4537 regulator_lock(rdev);
4539 cached_flags = rdev_get_cached_err_flags(rdev);
4541 if (rdev->desc->ops->get_error_flags)
4542 ret = rdev->desc->ops->get_error_flags(rdev, flags);
4543 else if (!rdev->use_cached_err)
4546 *flags |= cached_flags;
4548 regulator_unlock(rdev);
4554 * regulator_get_error_flags - get regulator error information
4555 * @regulator: regulator source
4556 * @flags: pointer to store error flags
4558 * Get the current regulator error information.
4560 int regulator_get_error_flags(struct regulator *regulator,
4561 unsigned int *flags)
4563 return _regulator_get_error_flags(regulator->rdev, flags);
4565 EXPORT_SYMBOL_GPL(regulator_get_error_flags);
4568 * regulator_set_load - set regulator load
4569 * @regulator: regulator source
4570 * @uA_load: load current
4572 * Notifies the regulator core of a new device load. This is then used by
4573 * DRMS (if enabled by constraints) to set the most efficient regulator
4574 * operating mode for the new regulator loading.
4576 * Consumer devices notify their supply regulator of the maximum power
4577 * they will require (can be taken from device datasheet in the power
4578 * consumption tables) when they change operational status and hence power
4579 * state. Examples of operational state changes that can affect power
4580 * consumption are :-
4582 * o Device is opened / closed.
4583 * o Device I/O is about to begin or has just finished.
4584 * o Device is idling in between work.
4586 * This information is also exported via sysfs to userspace.
4588 * DRMS will sum the total requested load on the regulator and change
4589 * to the most efficient operating mode if platform constraints allow.
4591 * NOTE: when a regulator consumer requests to have a regulator
4592 * disabled then any load that consumer requested no longer counts
4593 * toward the total requested load. If the regulator is re-enabled
4594 * then the previously requested load will start counting again.
4596 * If a regulator is an always-on regulator then an individual consumer's
4597 * load will still be removed if that consumer is fully disabled.
4599 * On error a negative errno is returned.
4601 int regulator_set_load(struct regulator *regulator, int uA_load)
4603 struct regulator_dev *rdev = regulator->rdev;
4607 regulator_lock(rdev);
4608 old_uA_load = regulator->uA_load;
4609 regulator->uA_load = uA_load;
4610 if (regulator->enable_count && old_uA_load != uA_load) {
4611 ret = drms_uA_update(rdev);
4613 regulator->uA_load = old_uA_load;
4615 regulator_unlock(rdev);
4619 EXPORT_SYMBOL_GPL(regulator_set_load);
4622 * regulator_allow_bypass - allow the regulator to go into bypass mode
4624 * @regulator: Regulator to configure
4625 * @enable: enable or disable bypass mode
4627 * Allow the regulator to go into bypass mode if all other consumers
4628 * for the regulator also enable bypass mode and the machine
4629 * constraints allow this. Bypass mode means that the regulator is
4630 * simply passing the input directly to the output with no regulation.
4632 int regulator_allow_bypass(struct regulator *regulator, bool enable)
4634 struct regulator_dev *rdev = regulator->rdev;
4635 const char *name = rdev_get_name(rdev);
4638 if (!rdev->desc->ops->set_bypass)
4641 if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_BYPASS))
4644 regulator_lock(rdev);
4646 if (enable && !regulator->bypass) {
4647 rdev->bypass_count++;
4649 if (rdev->bypass_count == rdev->open_count) {
4650 trace_regulator_bypass_enable(name);
4652 ret = rdev->desc->ops->set_bypass(rdev, enable);
4654 rdev->bypass_count--;
4656 trace_regulator_bypass_enable_complete(name);
4659 } else if (!enable && regulator->bypass) {
4660 rdev->bypass_count--;
4662 if (rdev->bypass_count != rdev->open_count) {
4663 trace_regulator_bypass_disable(name);
4665 ret = rdev->desc->ops->set_bypass(rdev, enable);
4667 rdev->bypass_count++;
4669 trace_regulator_bypass_disable_complete(name);
4674 regulator->bypass = enable;
4676 regulator_unlock(rdev);
4680 EXPORT_SYMBOL_GPL(regulator_allow_bypass);
4683 * regulator_register_notifier - register regulator event notifier
4684 * @regulator: regulator source
4685 * @nb: notifier block
4687 * Register notifier block to receive regulator events.
4689 int regulator_register_notifier(struct regulator *regulator,
4690 struct notifier_block *nb)
4692 return blocking_notifier_chain_register(®ulator->rdev->notifier,
4695 EXPORT_SYMBOL_GPL(regulator_register_notifier);
4698 * regulator_unregister_notifier - unregister regulator event notifier
4699 * @regulator: regulator source
4700 * @nb: notifier block
4702 * Unregister regulator event notifier block.
4704 int regulator_unregister_notifier(struct regulator *regulator,
4705 struct notifier_block *nb)
4707 return blocking_notifier_chain_unregister(®ulator->rdev->notifier,
4710 EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
4712 /* notify regulator consumers and downstream regulator consumers.
4713 * Note mutex must be held by caller.
4715 static int _notifier_call_chain(struct regulator_dev *rdev,
4716 unsigned long event, void *data)
4718 /* call rdev chain first */
4719 return blocking_notifier_call_chain(&rdev->notifier, event, data);
4723 * regulator_bulk_get - get multiple regulator consumers
4725 * @dev: Device to supply
4726 * @num_consumers: Number of consumers to register
4727 * @consumers: Configuration of consumers; clients are stored here.
4729 * @return 0 on success, an errno on failure.
4731 * This helper function allows drivers to get several regulator
4732 * consumers in one operation. If any of the regulators cannot be
4733 * acquired then any regulators that were allocated will be freed
4734 * before returning to the caller.
4736 int regulator_bulk_get(struct device *dev, int num_consumers,
4737 struct regulator_bulk_data *consumers)
4742 for (i = 0; i < num_consumers; i++)
4743 consumers[i].consumer = NULL;
4745 for (i = 0; i < num_consumers; i++) {
4746 consumers[i].consumer = regulator_get(dev,
4747 consumers[i].supply);
4748 if (IS_ERR(consumers[i].consumer)) {
4749 ret = PTR_ERR(consumers[i].consumer);
4750 consumers[i].consumer = NULL;
4758 if (ret != -EPROBE_DEFER)
4759 dev_err(dev, "Failed to get supply '%s': %pe\n",
4760 consumers[i].supply, ERR_PTR(ret));
4762 dev_dbg(dev, "Failed to get supply '%s', deferring\n",
4763 consumers[i].supply);
4766 regulator_put(consumers[i].consumer);
4770 EXPORT_SYMBOL_GPL(regulator_bulk_get);
4772 static void regulator_bulk_enable_async(void *data, async_cookie_t cookie)
4774 struct regulator_bulk_data *bulk = data;
4776 bulk->ret = regulator_enable(bulk->consumer);
4780 * regulator_bulk_enable - enable multiple regulator consumers
4782 * @num_consumers: Number of consumers
4783 * @consumers: Consumer data; clients are stored here.
4784 * @return 0 on success, an errno on failure
4786 * This convenience API allows consumers to enable multiple regulator
4787 * clients in a single API call. If any consumers cannot be enabled
4788 * then any others that were enabled will be disabled again prior to
4791 int regulator_bulk_enable(int num_consumers,
4792 struct regulator_bulk_data *consumers)
4794 ASYNC_DOMAIN_EXCLUSIVE(async_domain);
4798 for (i = 0; i < num_consumers; i++) {
4799 async_schedule_domain(regulator_bulk_enable_async,
4800 &consumers[i], &async_domain);
4803 async_synchronize_full_domain(&async_domain);
4805 /* If any consumer failed we need to unwind any that succeeded */
4806 for (i = 0; i < num_consumers; i++) {
4807 if (consumers[i].ret != 0) {
4808 ret = consumers[i].ret;
4816 for (i = 0; i < num_consumers; i++) {
4817 if (consumers[i].ret < 0)
4818 pr_err("Failed to enable %s: %pe\n", consumers[i].supply,
4819 ERR_PTR(consumers[i].ret));
4821 regulator_disable(consumers[i].consumer);
4826 EXPORT_SYMBOL_GPL(regulator_bulk_enable);
4829 * regulator_bulk_disable - disable multiple regulator consumers
4831 * @num_consumers: Number of consumers
4832 * @consumers: Consumer data; clients are stored here.
4833 * @return 0 on success, an errno on failure
4835 * This convenience API allows consumers to disable multiple regulator
4836 * clients in a single API call. If any consumers cannot be disabled
4837 * then any others that were disabled will be enabled again prior to
4840 int regulator_bulk_disable(int num_consumers,
4841 struct regulator_bulk_data *consumers)
4846 for (i = num_consumers - 1; i >= 0; --i) {
4847 ret = regulator_disable(consumers[i].consumer);
4855 pr_err("Failed to disable %s: %pe\n", consumers[i].supply, ERR_PTR(ret));
4856 for (++i; i < num_consumers; ++i) {
4857 r = regulator_enable(consumers[i].consumer);
4859 pr_err("Failed to re-enable %s: %pe\n",
4860 consumers[i].supply, ERR_PTR(r));
4865 EXPORT_SYMBOL_GPL(regulator_bulk_disable);
4868 * regulator_bulk_force_disable - force disable multiple regulator consumers
4870 * @num_consumers: Number of consumers
4871 * @consumers: Consumer data; clients are stored here.
4872 * @return 0 on success, an errno on failure
4874 * This convenience API allows consumers to forcibly disable multiple regulator
4875 * clients in a single API call.
4876 * NOTE: This should be used for situations when device damage will
4877 * likely occur if the regulators are not disabled (e.g. over temp).
4878 * Although regulator_force_disable function call for some consumers can
4879 * return error numbers, the function is called for all consumers.
4881 int regulator_bulk_force_disable(int num_consumers,
4882 struct regulator_bulk_data *consumers)
4887 for (i = 0; i < num_consumers; i++) {
4889 regulator_force_disable(consumers[i].consumer);
4891 /* Store first error for reporting */
4892 if (consumers[i].ret && !ret)
4893 ret = consumers[i].ret;
4898 EXPORT_SYMBOL_GPL(regulator_bulk_force_disable);
4901 * regulator_bulk_free - free multiple regulator consumers
4903 * @num_consumers: Number of consumers
4904 * @consumers: Consumer data; clients are stored here.
4906 * This convenience API allows consumers to free multiple regulator
4907 * clients in a single API call.
4909 void regulator_bulk_free(int num_consumers,
4910 struct regulator_bulk_data *consumers)
4914 for (i = 0; i < num_consumers; i++) {
4915 regulator_put(consumers[i].consumer);
4916 consumers[i].consumer = NULL;
4919 EXPORT_SYMBOL_GPL(regulator_bulk_free);
4922 * regulator_notifier_call_chain - call regulator event notifier
4923 * @rdev: regulator source
4924 * @event: notifier block
4925 * @data: callback-specific data.
4927 * Called by regulator drivers to notify clients a regulator event has
4930 int regulator_notifier_call_chain(struct regulator_dev *rdev,
4931 unsigned long event, void *data)
4933 _notifier_call_chain(rdev, event, data);
4937 EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
4940 * regulator_mode_to_status - convert a regulator mode into a status
4942 * @mode: Mode to convert
4944 * Convert a regulator mode into a status.
4946 int regulator_mode_to_status(unsigned int mode)
4949 case REGULATOR_MODE_FAST:
4950 return REGULATOR_STATUS_FAST;
4951 case REGULATOR_MODE_NORMAL:
4952 return REGULATOR_STATUS_NORMAL;
4953 case REGULATOR_MODE_IDLE:
4954 return REGULATOR_STATUS_IDLE;
4955 case REGULATOR_MODE_STANDBY:
4956 return REGULATOR_STATUS_STANDBY;
4958 return REGULATOR_STATUS_UNDEFINED;
4961 EXPORT_SYMBOL_GPL(regulator_mode_to_status);
4963 static struct attribute *regulator_dev_attrs[] = {
4964 &dev_attr_name.attr,
4965 &dev_attr_num_users.attr,
4966 &dev_attr_type.attr,
4967 &dev_attr_microvolts.attr,
4968 &dev_attr_microamps.attr,
4969 &dev_attr_opmode.attr,
4970 &dev_attr_state.attr,
4971 &dev_attr_status.attr,
4972 &dev_attr_bypass.attr,
4973 &dev_attr_requested_microamps.attr,
4974 &dev_attr_min_microvolts.attr,
4975 &dev_attr_max_microvolts.attr,
4976 &dev_attr_min_microamps.attr,
4977 &dev_attr_max_microamps.attr,
4978 &dev_attr_suspend_standby_state.attr,
4979 &dev_attr_suspend_mem_state.attr,
4980 &dev_attr_suspend_disk_state.attr,
4981 &dev_attr_suspend_standby_microvolts.attr,
4982 &dev_attr_suspend_mem_microvolts.attr,
4983 &dev_attr_suspend_disk_microvolts.attr,
4984 &dev_attr_suspend_standby_mode.attr,
4985 &dev_attr_suspend_mem_mode.attr,
4986 &dev_attr_suspend_disk_mode.attr,
4991 * To avoid cluttering sysfs (and memory) with useless state, only
4992 * create attributes that can be meaningfully displayed.
4994 static umode_t regulator_attr_is_visible(struct kobject *kobj,
4995 struct attribute *attr, int idx)
4997 struct device *dev = kobj_to_dev(kobj);
4998 struct regulator_dev *rdev = dev_to_rdev(dev);
4999 const struct regulator_ops *ops = rdev->desc->ops;
5000 umode_t mode = attr->mode;
5002 /* these three are always present */
5003 if (attr == &dev_attr_name.attr ||
5004 attr == &dev_attr_num_users.attr ||
5005 attr == &dev_attr_type.attr)
5008 /* some attributes need specific methods to be displayed */
5009 if (attr == &dev_attr_microvolts.attr) {
5010 if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) ||
5011 (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) ||
5012 (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) ||
5013 (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1))
5018 if (attr == &dev_attr_microamps.attr)
5019 return ops->get_current_limit ? mode : 0;
5021 if (attr == &dev_attr_opmode.attr)
5022 return ops->get_mode ? mode : 0;
5024 if (attr == &dev_attr_state.attr)
5025 return (rdev->ena_pin || ops->is_enabled) ? mode : 0;
5027 if (attr == &dev_attr_status.attr)
5028 return ops->get_status ? mode : 0;
5030 if (attr == &dev_attr_bypass.attr)
5031 return ops->get_bypass ? mode : 0;
5033 /* constraints need specific supporting methods */
5034 if (attr == &dev_attr_min_microvolts.attr ||
5035 attr == &dev_attr_max_microvolts.attr)
5036 return (ops->set_voltage || ops->set_voltage_sel) ? mode : 0;
5038 if (attr == &dev_attr_min_microamps.attr ||
5039 attr == &dev_attr_max_microamps.attr)
5040 return ops->set_current_limit ? mode : 0;
5042 if (attr == &dev_attr_suspend_standby_state.attr ||
5043 attr == &dev_attr_suspend_mem_state.attr ||
5044 attr == &dev_attr_suspend_disk_state.attr)
5047 if (attr == &dev_attr_suspend_standby_microvolts.attr ||
5048 attr == &dev_attr_suspend_mem_microvolts.attr ||
5049 attr == &dev_attr_suspend_disk_microvolts.attr)
5050 return ops->set_suspend_voltage ? mode : 0;
5052 if (attr == &dev_attr_suspend_standby_mode.attr ||
5053 attr == &dev_attr_suspend_mem_mode.attr ||
5054 attr == &dev_attr_suspend_disk_mode.attr)
5055 return ops->set_suspend_mode ? mode : 0;
5060 static const struct attribute_group regulator_dev_group = {
5061 .attrs = regulator_dev_attrs,
5062 .is_visible = regulator_attr_is_visible,
5065 static const struct attribute_group *regulator_dev_groups[] = {
5066 ®ulator_dev_group,
5070 static void regulator_dev_release(struct device *dev)
5072 struct regulator_dev *rdev = dev_get_drvdata(dev);
5074 kfree(rdev->constraints);
5075 of_node_put(rdev->dev.of_node);
5079 static void rdev_init_debugfs(struct regulator_dev *rdev)
5081 struct device *parent = rdev->dev.parent;
5082 const char *rname = rdev_get_name(rdev);
5083 char name[NAME_MAX];
5085 /* Avoid duplicate debugfs directory names */
5086 if (parent && rname == rdev->desc->name) {
5087 snprintf(name, sizeof(name), "%s-%s", dev_name(parent),
5092 rdev->debugfs = debugfs_create_dir(rname, debugfs_root);
5093 if (!rdev->debugfs) {
5094 rdev_warn(rdev, "Failed to create debugfs directory\n");
5098 debugfs_create_u32("use_count", 0444, rdev->debugfs,
5100 debugfs_create_u32("open_count", 0444, rdev->debugfs,
5102 debugfs_create_u32("bypass_count", 0444, rdev->debugfs,
5103 &rdev->bypass_count);
5106 static int regulator_register_resolve_supply(struct device *dev, void *data)
5108 struct regulator_dev *rdev = dev_to_rdev(dev);
5110 if (regulator_resolve_supply(rdev))
5111 rdev_dbg(rdev, "unable to resolve supply\n");
5116 int regulator_coupler_register(struct regulator_coupler *coupler)
5118 mutex_lock(®ulator_list_mutex);
5119 list_add_tail(&coupler->list, ®ulator_coupler_list);
5120 mutex_unlock(®ulator_list_mutex);
5125 static struct regulator_coupler *
5126 regulator_find_coupler(struct regulator_dev *rdev)
5128 struct regulator_coupler *coupler;
5132 * Note that regulators are appended to the list and the generic
5133 * coupler is registered first, hence it will be attached at last
5136 list_for_each_entry_reverse(coupler, ®ulator_coupler_list, list) {
5137 err = coupler->attach_regulator(coupler, rdev);
5139 if (!coupler->balance_voltage &&
5140 rdev->coupling_desc.n_coupled > 2)
5141 goto err_unsupported;
5147 return ERR_PTR(err);
5155 return ERR_PTR(-EINVAL);
5158 if (coupler->detach_regulator)
5159 coupler->detach_regulator(coupler, rdev);
5162 "Voltage balancing for multiple regulator couples is unimplemented\n");
5164 return ERR_PTR(-EPERM);
5167 static void regulator_resolve_coupling(struct regulator_dev *rdev)
5169 struct regulator_coupler *coupler = rdev->coupling_desc.coupler;
5170 struct coupling_desc *c_desc = &rdev->coupling_desc;
5171 int n_coupled = c_desc->n_coupled;
5172 struct regulator_dev *c_rdev;
5175 for (i = 1; i < n_coupled; i++) {
5176 /* already resolved */
5177 if (c_desc->coupled_rdevs[i])
5180 c_rdev = of_parse_coupled_regulator(rdev, i - 1);
5185 if (c_rdev->coupling_desc.coupler != coupler) {
5186 rdev_err(rdev, "coupler mismatch with %s\n",
5187 rdev_get_name(c_rdev));
5191 c_desc->coupled_rdevs[i] = c_rdev;
5192 c_desc->n_resolved++;
5194 regulator_resolve_coupling(c_rdev);
5198 static void regulator_remove_coupling(struct regulator_dev *rdev)
5200 struct regulator_coupler *coupler = rdev->coupling_desc.coupler;
5201 struct coupling_desc *__c_desc, *c_desc = &rdev->coupling_desc;
5202 struct regulator_dev *__c_rdev, *c_rdev;
5203 unsigned int __n_coupled, n_coupled;
5207 n_coupled = c_desc->n_coupled;
5209 for (i = 1; i < n_coupled; i++) {
5210 c_rdev = c_desc->coupled_rdevs[i];
5215 regulator_lock(c_rdev);
5217 __c_desc = &c_rdev->coupling_desc;
5218 __n_coupled = __c_desc->n_coupled;
5220 for (k = 1; k < __n_coupled; k++) {
5221 __c_rdev = __c_desc->coupled_rdevs[k];
5223 if (__c_rdev == rdev) {
5224 __c_desc->coupled_rdevs[k] = NULL;
5225 __c_desc->n_resolved--;
5230 regulator_unlock(c_rdev);
5232 c_desc->coupled_rdevs[i] = NULL;
5233 c_desc->n_resolved--;
5236 if (coupler && coupler->detach_regulator) {
5237 err = coupler->detach_regulator(coupler, rdev);
5239 rdev_err(rdev, "failed to detach from coupler: %pe\n",
5243 kfree(rdev->coupling_desc.coupled_rdevs);
5244 rdev->coupling_desc.coupled_rdevs = NULL;
5247 static int regulator_init_coupling(struct regulator_dev *rdev)
5249 struct regulator_dev **coupled;
5250 int err, n_phandles;
5252 if (!IS_ENABLED(CONFIG_OF))
5255 n_phandles = of_get_n_coupled(rdev);
5257 coupled = kcalloc(n_phandles + 1, sizeof(*coupled), GFP_KERNEL);
5261 rdev->coupling_desc.coupled_rdevs = coupled;
5264 * Every regulator should always have coupling descriptor filled with
5265 * at least pointer to itself.
5267 rdev->coupling_desc.coupled_rdevs[0] = rdev;
5268 rdev->coupling_desc.n_coupled = n_phandles + 1;
5269 rdev->coupling_desc.n_resolved++;
5271 /* regulator isn't coupled */
5272 if (n_phandles == 0)
5275 if (!of_check_coupling_data(rdev))
5278 mutex_lock(®ulator_list_mutex);
5279 rdev->coupling_desc.coupler = regulator_find_coupler(rdev);
5280 mutex_unlock(®ulator_list_mutex);
5282 if (IS_ERR(rdev->coupling_desc.coupler)) {
5283 err = PTR_ERR(rdev->coupling_desc.coupler);
5284 rdev_err(rdev, "failed to get coupler: %pe\n", ERR_PTR(err));
5291 static int generic_coupler_attach(struct regulator_coupler *coupler,
5292 struct regulator_dev *rdev)
5294 if (rdev->coupling_desc.n_coupled > 2) {
5296 "Voltage balancing for multiple regulator couples is unimplemented\n");
5300 if (!rdev->constraints->always_on) {
5302 "Coupling of a non always-on regulator is unimplemented\n");
5309 static struct regulator_coupler generic_regulator_coupler = {
5310 .attach_regulator = generic_coupler_attach,
5314 * regulator_register - register regulator
5315 * @regulator_desc: regulator to register
5316 * @cfg: runtime configuration for regulator
5318 * Called by regulator drivers to register a regulator.
5319 * Returns a valid pointer to struct regulator_dev on success
5320 * or an ERR_PTR() on error.
5322 struct regulator_dev *
5323 regulator_register(const struct regulator_desc *regulator_desc,
5324 const struct regulator_config *cfg)
5326 const struct regulator_init_data *init_data;
5327 struct regulator_config *config = NULL;
5328 static atomic_t regulator_no = ATOMIC_INIT(-1);
5329 struct regulator_dev *rdev;
5330 bool dangling_cfg_gpiod = false;
5331 bool dangling_of_gpiod = false;
5336 return ERR_PTR(-EINVAL);
5338 dangling_cfg_gpiod = true;
5339 if (regulator_desc == NULL) {
5347 if (regulator_desc->name == NULL || regulator_desc->ops == NULL) {
5352 if (regulator_desc->type != REGULATOR_VOLTAGE &&
5353 regulator_desc->type != REGULATOR_CURRENT) {
5358 /* Only one of each should be implemented */
5359 WARN_ON(regulator_desc->ops->get_voltage &&
5360 regulator_desc->ops->get_voltage_sel);
5361 WARN_ON(regulator_desc->ops->set_voltage &&
5362 regulator_desc->ops->set_voltage_sel);
5364 /* If we're using selectors we must implement list_voltage. */
5365 if (regulator_desc->ops->get_voltage_sel &&
5366 !regulator_desc->ops->list_voltage) {
5370 if (regulator_desc->ops->set_voltage_sel &&
5371 !regulator_desc->ops->list_voltage) {
5376 rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
5381 device_initialize(&rdev->dev);
5382 spin_lock_init(&rdev->err_lock);
5385 * Duplicate the config so the driver could override it after
5386 * parsing init data.
5388 config = kmemdup(cfg, sizeof(*cfg), GFP_KERNEL);
5389 if (config == NULL) {
5394 init_data = regulator_of_get_init_data(dev, regulator_desc, config,
5395 &rdev->dev.of_node);
5398 * Sometimes not all resources are probed already so we need to take
5399 * that into account. This happens most the time if the ena_gpiod comes
5400 * from a gpio extender or something else.
5402 if (PTR_ERR(init_data) == -EPROBE_DEFER) {
5403 ret = -EPROBE_DEFER;
5408 * We need to keep track of any GPIO descriptor coming from the
5409 * device tree until we have handled it over to the core. If the
5410 * config that was passed in to this function DOES NOT contain
5411 * a descriptor, and the config after this call DOES contain
5412 * a descriptor, we definitely got one from parsing the device
5415 if (!cfg->ena_gpiod && config->ena_gpiod)
5416 dangling_of_gpiod = true;
5418 init_data = config->init_data;
5419 rdev->dev.of_node = of_node_get(config->of_node);
5422 ww_mutex_init(&rdev->mutex, ®ulator_ww_class);
5423 rdev->reg_data = config->driver_data;
5424 rdev->owner = regulator_desc->owner;
5425 rdev->desc = regulator_desc;
5427 rdev->regmap = config->regmap;
5428 else if (dev_get_regmap(dev, NULL))
5429 rdev->regmap = dev_get_regmap(dev, NULL);
5430 else if (dev->parent)
5431 rdev->regmap = dev_get_regmap(dev->parent, NULL);
5432 INIT_LIST_HEAD(&rdev->consumer_list);
5433 INIT_LIST_HEAD(&rdev->list);
5434 BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
5435 INIT_DELAYED_WORK(&rdev->disable_work, regulator_disable_work);
5437 /* preform any regulator specific init */
5438 if (init_data && init_data->regulator_init) {
5439 ret = init_data->regulator_init(rdev->reg_data);
5444 if (config->ena_gpiod) {
5445 ret = regulator_ena_gpio_request(rdev, config);
5447 rdev_err(rdev, "Failed to request enable GPIO: %pe\n",
5451 /* The regulator core took over the GPIO descriptor */
5452 dangling_cfg_gpiod = false;
5453 dangling_of_gpiod = false;
5456 /* register with sysfs */
5457 rdev->dev.class = ®ulator_class;
5458 rdev->dev.parent = dev;
5459 dev_set_name(&rdev->dev, "regulator.%lu",
5460 (unsigned long) atomic_inc_return(®ulator_no));
5461 dev_set_drvdata(&rdev->dev, rdev);
5463 /* set regulator constraints */
5465 rdev->constraints = kmemdup(&init_data->constraints,
5466 sizeof(*rdev->constraints),
5469 rdev->constraints = kzalloc(sizeof(*rdev->constraints),
5471 if (!rdev->constraints) {
5476 if (init_data && init_data->supply_regulator)
5477 rdev->supply_name = init_data->supply_regulator;
5478 else if (regulator_desc->supply_name)
5479 rdev->supply_name = regulator_desc->supply_name;
5481 ret = set_machine_constraints(rdev);
5482 if (ret == -EPROBE_DEFER) {
5483 /* Regulator might be in bypass mode and so needs its supply
5484 * to set the constraints
5486 /* FIXME: this currently triggers a chicken-and-egg problem
5487 * when creating -SUPPLY symlink in sysfs to a regulator
5488 * that is just being created
5490 rdev_dbg(rdev, "will resolve supply early: %s\n",
5492 ret = regulator_resolve_supply(rdev);
5494 ret = set_machine_constraints(rdev);
5496 rdev_dbg(rdev, "unable to resolve supply early: %pe\n",
5502 ret = regulator_init_coupling(rdev);
5506 /* add consumers devices */
5508 for (i = 0; i < init_data->num_consumer_supplies; i++) {
5509 ret = set_consumer_device_supply(rdev,
5510 init_data->consumer_supplies[i].dev_name,
5511 init_data->consumer_supplies[i].supply);
5513 dev_err(dev, "Failed to set supply %s\n",
5514 init_data->consumer_supplies[i].supply);
5515 goto unset_supplies;
5520 if (!rdev->desc->ops->get_voltage &&
5521 !rdev->desc->ops->list_voltage &&
5522 !rdev->desc->fixed_uV)
5523 rdev->is_switch = true;
5525 ret = device_add(&rdev->dev);
5527 goto unset_supplies;
5529 rdev_init_debugfs(rdev);
5531 /* try to resolve regulators coupling since a new one was registered */
5532 mutex_lock(®ulator_list_mutex);
5533 regulator_resolve_coupling(rdev);
5534 mutex_unlock(®ulator_list_mutex);
5536 /* try to resolve regulators supply since a new one was registered */
5537 class_for_each_device(®ulator_class, NULL, NULL,
5538 regulator_register_resolve_supply);
5543 mutex_lock(®ulator_list_mutex);
5544 unset_regulator_supplies(rdev);
5545 regulator_remove_coupling(rdev);
5546 mutex_unlock(®ulator_list_mutex);
5548 kfree(rdev->coupling_desc.coupled_rdevs);
5549 mutex_lock(®ulator_list_mutex);
5550 regulator_ena_gpio_free(rdev);
5551 mutex_unlock(®ulator_list_mutex);
5553 if (dangling_of_gpiod)
5554 gpiod_put(config->ena_gpiod);
5556 put_device(&rdev->dev);
5558 if (dangling_cfg_gpiod)
5559 gpiod_put(cfg->ena_gpiod);
5560 return ERR_PTR(ret);
5562 EXPORT_SYMBOL_GPL(regulator_register);
5565 * regulator_unregister - unregister regulator
5566 * @rdev: regulator to unregister
5568 * Called by regulator drivers to unregister a regulator.
5570 void regulator_unregister(struct regulator_dev *rdev)
5576 while (rdev->use_count--)
5577 regulator_disable(rdev->supply);
5578 regulator_put(rdev->supply);
5581 flush_work(&rdev->disable_work.work);
5583 mutex_lock(®ulator_list_mutex);
5585 debugfs_remove_recursive(rdev->debugfs);
5586 WARN_ON(rdev->open_count);
5587 regulator_remove_coupling(rdev);
5588 unset_regulator_supplies(rdev);
5589 list_del(&rdev->list);
5590 regulator_ena_gpio_free(rdev);
5591 device_unregister(&rdev->dev);
5593 mutex_unlock(®ulator_list_mutex);
5595 EXPORT_SYMBOL_GPL(regulator_unregister);
5597 #ifdef CONFIG_SUSPEND
5599 * regulator_suspend - prepare regulators for system wide suspend
5600 * @dev: ``&struct device`` pointer that is passed to _regulator_suspend()
5602 * Configure each regulator with it's suspend operating parameters for state.
5604 static int regulator_suspend(struct device *dev)
5606 struct regulator_dev *rdev = dev_to_rdev(dev);
5607 suspend_state_t state = pm_suspend_target_state;
5609 const struct regulator_state *rstate;
5611 rstate = regulator_get_suspend_state_check(rdev, state);
5615 regulator_lock(rdev);
5616 ret = __suspend_set_state(rdev, rstate);
5617 regulator_unlock(rdev);
5622 static int regulator_resume(struct device *dev)
5624 suspend_state_t state = pm_suspend_target_state;
5625 struct regulator_dev *rdev = dev_to_rdev(dev);
5626 struct regulator_state *rstate;
5629 rstate = regulator_get_suspend_state(rdev, state);
5633 /* Avoid grabbing the lock if we don't need to */
5634 if (!rdev->desc->ops->resume)
5637 regulator_lock(rdev);
5639 if (rstate->enabled == ENABLE_IN_SUSPEND ||
5640 rstate->enabled == DISABLE_IN_SUSPEND)
5641 ret = rdev->desc->ops->resume(rdev);
5643 regulator_unlock(rdev);
5647 #else /* !CONFIG_SUSPEND */
5649 #define regulator_suspend NULL
5650 #define regulator_resume NULL
5652 #endif /* !CONFIG_SUSPEND */
5655 static const struct dev_pm_ops __maybe_unused regulator_pm_ops = {
5656 .suspend = regulator_suspend,
5657 .resume = regulator_resume,
5661 struct class regulator_class = {
5662 .name = "regulator",
5663 .dev_release = regulator_dev_release,
5664 .dev_groups = regulator_dev_groups,
5666 .pm = ®ulator_pm_ops,
5670 * regulator_has_full_constraints - the system has fully specified constraints
5672 * Calling this function will cause the regulator API to disable all
5673 * regulators which have a zero use count and don't have an always_on
5674 * constraint in a late_initcall.
5676 * The intention is that this will become the default behaviour in a
5677 * future kernel release so users are encouraged to use this facility
5680 void regulator_has_full_constraints(void)
5682 has_full_constraints = 1;
5684 EXPORT_SYMBOL_GPL(regulator_has_full_constraints);
5687 * rdev_get_drvdata - get rdev regulator driver data
5690 * Get rdev regulator driver private data. This call can be used in the
5691 * regulator driver context.
5693 void *rdev_get_drvdata(struct regulator_dev *rdev)
5695 return rdev->reg_data;
5697 EXPORT_SYMBOL_GPL(rdev_get_drvdata);
5700 * regulator_get_drvdata - get regulator driver data
5701 * @regulator: regulator
5703 * Get regulator driver private data. This call can be used in the consumer
5704 * driver context when non API regulator specific functions need to be called.
5706 void *regulator_get_drvdata(struct regulator *regulator)
5708 return regulator->rdev->reg_data;
5710 EXPORT_SYMBOL_GPL(regulator_get_drvdata);
5713 * regulator_set_drvdata - set regulator driver data
5714 * @regulator: regulator
5717 void regulator_set_drvdata(struct regulator *regulator, void *data)
5719 regulator->rdev->reg_data = data;
5721 EXPORT_SYMBOL_GPL(regulator_set_drvdata);
5724 * rdev_get_id - get regulator ID
5727 int rdev_get_id(struct regulator_dev *rdev)
5729 return rdev->desc->id;
5731 EXPORT_SYMBOL_GPL(rdev_get_id);
5733 struct device *rdev_get_dev(struct regulator_dev *rdev)
5737 EXPORT_SYMBOL_GPL(rdev_get_dev);
5739 struct regmap *rdev_get_regmap(struct regulator_dev *rdev)
5741 return rdev->regmap;
5743 EXPORT_SYMBOL_GPL(rdev_get_regmap);
5745 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
5747 return reg_init_data->driver_data;
5749 EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
5751 #ifdef CONFIG_DEBUG_FS
5752 static int supply_map_show(struct seq_file *sf, void *data)
5754 struct regulator_map *map;
5756 list_for_each_entry(map, ®ulator_map_list, list) {
5757 seq_printf(sf, "%s -> %s.%s\n",
5758 rdev_get_name(map->regulator), map->dev_name,
5764 DEFINE_SHOW_ATTRIBUTE(supply_map);
5766 struct summary_data {
5768 struct regulator_dev *parent;
5772 static void regulator_summary_show_subtree(struct seq_file *s,
5773 struct regulator_dev *rdev,
5776 static int regulator_summary_show_children(struct device *dev, void *data)
5778 struct regulator_dev *rdev = dev_to_rdev(dev);
5779 struct summary_data *summary_data = data;
5781 if (rdev->supply && rdev->supply->rdev == summary_data->parent)
5782 regulator_summary_show_subtree(summary_data->s, rdev,
5783 summary_data->level + 1);
5788 static void regulator_summary_show_subtree(struct seq_file *s,
5789 struct regulator_dev *rdev,
5792 struct regulation_constraints *c;
5793 struct regulator *consumer;
5794 struct summary_data summary_data;
5795 unsigned int opmode;
5800 opmode = _regulator_get_mode_unlocked(rdev);
5801 seq_printf(s, "%*s%-*s %3d %4d %6d %7s ",
5803 30 - level * 3, rdev_get_name(rdev),
5804 rdev->use_count, rdev->open_count, rdev->bypass_count,
5805 regulator_opmode_to_str(opmode));
5807 seq_printf(s, "%5dmV ", regulator_get_voltage_rdev(rdev) / 1000);
5808 seq_printf(s, "%5dmA ",
5809 _regulator_get_current_limit_unlocked(rdev) / 1000);
5811 c = rdev->constraints;
5813 switch (rdev->desc->type) {
5814 case REGULATOR_VOLTAGE:
5815 seq_printf(s, "%5dmV %5dmV ",
5816 c->min_uV / 1000, c->max_uV / 1000);
5818 case REGULATOR_CURRENT:
5819 seq_printf(s, "%5dmA %5dmA ",
5820 c->min_uA / 1000, c->max_uA / 1000);
5827 list_for_each_entry(consumer, &rdev->consumer_list, list) {
5828 if (consumer->dev && consumer->dev->class == ®ulator_class)
5831 seq_printf(s, "%*s%-*s ",
5832 (level + 1) * 3 + 1, "",
5833 30 - (level + 1) * 3,
5834 consumer->supply_name ? consumer->supply_name :
5835 consumer->dev ? dev_name(consumer->dev) : "deviceless");
5837 switch (rdev->desc->type) {
5838 case REGULATOR_VOLTAGE:
5839 seq_printf(s, "%3d %33dmA%c%5dmV %5dmV",
5840 consumer->enable_count,
5841 consumer->uA_load / 1000,
5842 consumer->uA_load && !consumer->enable_count ?
5844 consumer->voltage[PM_SUSPEND_ON].min_uV / 1000,
5845 consumer->voltage[PM_SUSPEND_ON].max_uV / 1000);
5847 case REGULATOR_CURRENT:
5855 summary_data.level = level;
5856 summary_data.parent = rdev;
5858 class_for_each_device(®ulator_class, NULL, &summary_data,
5859 regulator_summary_show_children);
5862 struct summary_lock_data {
5863 struct ww_acquire_ctx *ww_ctx;
5864 struct regulator_dev **new_contended_rdev;
5865 struct regulator_dev **old_contended_rdev;
5868 static int regulator_summary_lock_one(struct device *dev, void *data)
5870 struct regulator_dev *rdev = dev_to_rdev(dev);
5871 struct summary_lock_data *lock_data = data;
5874 if (rdev != *lock_data->old_contended_rdev) {
5875 ret = regulator_lock_nested(rdev, lock_data->ww_ctx);
5877 if (ret == -EDEADLK)
5878 *lock_data->new_contended_rdev = rdev;
5882 *lock_data->old_contended_rdev = NULL;
5888 static int regulator_summary_unlock_one(struct device *dev, void *data)
5890 struct regulator_dev *rdev = dev_to_rdev(dev);
5891 struct summary_lock_data *lock_data = data;
5894 if (rdev == *lock_data->new_contended_rdev)
5898 regulator_unlock(rdev);
5903 static int regulator_summary_lock_all(struct ww_acquire_ctx *ww_ctx,
5904 struct regulator_dev **new_contended_rdev,
5905 struct regulator_dev **old_contended_rdev)
5907 struct summary_lock_data lock_data;
5910 lock_data.ww_ctx = ww_ctx;
5911 lock_data.new_contended_rdev = new_contended_rdev;
5912 lock_data.old_contended_rdev = old_contended_rdev;
5914 ret = class_for_each_device(®ulator_class, NULL, &lock_data,
5915 regulator_summary_lock_one);
5917 class_for_each_device(®ulator_class, NULL, &lock_data,
5918 regulator_summary_unlock_one);
5923 static void regulator_summary_lock(struct ww_acquire_ctx *ww_ctx)
5925 struct regulator_dev *new_contended_rdev = NULL;
5926 struct regulator_dev *old_contended_rdev = NULL;
5929 mutex_lock(®ulator_list_mutex);
5931 ww_acquire_init(ww_ctx, ®ulator_ww_class);
5934 if (new_contended_rdev) {
5935 ww_mutex_lock_slow(&new_contended_rdev->mutex, ww_ctx);
5936 old_contended_rdev = new_contended_rdev;
5937 old_contended_rdev->ref_cnt++;
5940 err = regulator_summary_lock_all(ww_ctx,
5941 &new_contended_rdev,
5942 &old_contended_rdev);
5944 if (old_contended_rdev)
5945 regulator_unlock(old_contended_rdev);
5947 } while (err == -EDEADLK);
5949 ww_acquire_done(ww_ctx);
5952 static void regulator_summary_unlock(struct ww_acquire_ctx *ww_ctx)
5954 class_for_each_device(®ulator_class, NULL, NULL,
5955 regulator_summary_unlock_one);
5956 ww_acquire_fini(ww_ctx);
5958 mutex_unlock(®ulator_list_mutex);
5961 static int regulator_summary_show_roots(struct device *dev, void *data)
5963 struct regulator_dev *rdev = dev_to_rdev(dev);
5964 struct seq_file *s = data;
5967 regulator_summary_show_subtree(s, rdev, 0);
5972 static int regulator_summary_show(struct seq_file *s, void *data)
5974 struct ww_acquire_ctx ww_ctx;
5976 seq_puts(s, " regulator use open bypass opmode voltage current min max\n");
5977 seq_puts(s, "---------------------------------------------------------------------------------------\n");
5979 regulator_summary_lock(&ww_ctx);
5981 class_for_each_device(®ulator_class, NULL, s,
5982 regulator_summary_show_roots);
5984 regulator_summary_unlock(&ww_ctx);
5988 DEFINE_SHOW_ATTRIBUTE(regulator_summary);
5989 #endif /* CONFIG_DEBUG_FS */
5991 static int __init regulator_init(void)
5995 ret = class_register(®ulator_class);
5997 debugfs_root = debugfs_create_dir("regulator", NULL);
5999 pr_warn("regulator: Failed to create debugfs directory\n");
6001 #ifdef CONFIG_DEBUG_FS
6002 debugfs_create_file("supply_map", 0444, debugfs_root, NULL,
6005 debugfs_create_file("regulator_summary", 0444, debugfs_root,
6006 NULL, ®ulator_summary_fops);
6008 regulator_dummy_init();
6010 regulator_coupler_register(&generic_regulator_coupler);
6015 /* init early to allow our consumers to complete system booting */
6016 core_initcall(regulator_init);
6018 static int regulator_late_cleanup(struct device *dev, void *data)
6020 struct regulator_dev *rdev = dev_to_rdev(dev);
6021 struct regulation_constraints *c = rdev->constraints;
6024 if (c && c->always_on)
6027 if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS))
6030 regulator_lock(rdev);
6032 if (rdev->use_count)
6035 /* If reading the status failed, assume that it's off. */
6036 if (_regulator_is_enabled(rdev) <= 0)
6039 if (have_full_constraints()) {
6040 /* We log since this may kill the system if it goes
6043 rdev_info(rdev, "disabling\n");
6044 ret = _regulator_do_disable(rdev);
6046 rdev_err(rdev, "couldn't disable: %pe\n", ERR_PTR(ret));
6048 /* The intention is that in future we will
6049 * assume that full constraints are provided
6050 * so warn even if we aren't going to do
6053 rdev_warn(rdev, "incomplete constraints, leaving on\n");
6057 regulator_unlock(rdev);
6062 static void regulator_init_complete_work_function(struct work_struct *work)
6065 * Regulators may had failed to resolve their input supplies
6066 * when were registered, either because the input supply was
6067 * not registered yet or because its parent device was not
6068 * bound yet. So attempt to resolve the input supplies for
6069 * pending regulators before trying to disable unused ones.
6071 class_for_each_device(®ulator_class, NULL, NULL,
6072 regulator_register_resolve_supply);
6074 /* If we have a full configuration then disable any regulators
6075 * we have permission to change the status for and which are
6076 * not in use or always_on. This is effectively the default
6077 * for DT and ACPI as they have full constraints.
6079 class_for_each_device(®ulator_class, NULL, NULL,
6080 regulator_late_cleanup);
6083 static DECLARE_DELAYED_WORK(regulator_init_complete_work,
6084 regulator_init_complete_work_function);
6086 static int __init regulator_init_complete(void)
6089 * Since DT doesn't provide an idiomatic mechanism for
6090 * enabling full constraints and since it's much more natural
6091 * with DT to provide them just assume that a DT enabled
6092 * system has full constraints.
6094 if (of_have_populated_dt())
6095 has_full_constraints = true;
6098 * We punt completion for an arbitrary amount of time since
6099 * systems like distros will load many drivers from userspace
6100 * so consumers might not always be ready yet, this is
6101 * particularly an issue with laptops where this might bounce
6102 * the display off then on. Ideally we'd get a notification
6103 * from userspace when this happens but we don't so just wait
6104 * a bit and hope we waited long enough. It'd be better if
6105 * we'd only do this on systems that need it, and a kernel
6106 * command line option might be useful.
6108 schedule_delayed_work(®ulator_init_complete_work,
6109 msecs_to_jiffies(30000));
6113 late_initcall_sync(regulator_init_complete);