drivers/pwm/pwm-sprd.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2019 Spreadtrum Communications Inc.
   4  */
   5
   6 #include <linux/clk.h>
   7 #include <linux/err.h>
   8 #include <linux/io.h>
   9 #include <linux/math64.h>
  10 #include <linux/module.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/pwm.h>
  13
  14 #define SPRD_PWM_PRESCALE       0x0
  15 #define SPRD_PWM_MOD            0x4
  16 #define SPRD_PWM_DUTY           0x8
  17 #define SPRD_PWM_ENABLE         0x18
  18
  19 #define SPRD_PWM_MOD_MAX        GENMASK(7, 0)
  20 #define SPRD_PWM_DUTY_MSK       GENMASK(15, 0)
  21 #define SPRD_PWM_PRESCALE_MSK   GENMASK(7, 0)
  22 #define SPRD_PWM_ENABLE_BIT     BIT(0)
  23
  24 #define SPRD_PWM_CHN_NUM        4
  25 #define SPRD_PWM_REGS_SHIFT     5
  26 #define SPRD_PWM_CHN_CLKS_NUM   2
  27 #define SPRD_PWM_CHN_OUTPUT_CLK 1
  28
  29 struct sprd_pwm_chn {
  30         struct clk_bulk_data clks[SPRD_PWM_CHN_CLKS_NUM];
  31         u32 clk_rate;
  32 };
  33
  34 struct sprd_pwm_chip {
  35         void __iomem *base;
  36         struct device *dev;
  37         struct pwm_chip chip;
  38         int num_pwms;
  39         struct sprd_pwm_chn chn[SPRD_PWM_CHN_NUM];
  40 };
  41
  42 /*
  43  * The list of clocks required by PWM channels, and each channel has 2 clocks:
  44  * enable clock and pwm clock.
  45  */
  46 static const char * const sprd_pwm_clks[] = {
  47         "enable0", "pwm0",
  48         "enable1", "pwm1",
  49         "enable2", "pwm2",
  50         "enable3", "pwm3",
  51 };
  52
  53 static u32 sprd_pwm_read(struct sprd_pwm_chip *spc, u32 hwid, u32 reg)
  54 {
  55         u32 offset = reg + (hwid << SPRD_PWM_REGS_SHIFT);
  56
  57         return readl_relaxed(spc->base + offset);
  58 }
  59
  60 static void sprd_pwm_write(struct sprd_pwm_chip *spc, u32 hwid,
  61                            u32 reg, u32 val)
  62 {
  63         u32 offset = reg + (hwid << SPRD_PWM_REGS_SHIFT);
  64
  65         writel_relaxed(val, spc->base + offset);
  66 }
  67
  68 static void sprd_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
  69                                struct pwm_state *state)
  70 {
  71         struct sprd_pwm_chip *spc =
  72                 container_of(chip, struct sprd_pwm_chip, chip);
  73         struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
  74         u32 val, duty, prescale;
  75         u64 tmp;
  76         int ret;
  77
  78         /*
  79          * The clocks to PWM channel has to be enabled first before
  80          * reading to the registers.
  81          */
  82         ret = clk_bulk_prepare_enable(SPRD_PWM_CHN_CLKS_NUM, chn->clks);
  83         if (ret) {
  84                 dev_err(spc->dev, "failed to enable pwm%u clocks\n",
  85                         pwm->hwpwm);
  86                 return;
  87         }
  88
  89         val = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_ENABLE);
  90         if (val & SPRD_PWM_ENABLE_BIT)
  91                 state->enabled = true;
  92         else
  93                 state->enabled = false;
  94
  95         /*
  96          * The hardware provides a counter that is feed by the source clock.
  97          * The period length is (PRESCALE + 1) * MOD counter steps.
  98          * The duty cycle length is (PRESCALE + 1) * DUTY counter steps.
  99          * Thus the period_ns and duty_ns calculation formula should be:
 100          * period_ns = NSEC_PER_SEC * (prescale + 1) * mod / clk_rate
 101          * duty_ns = NSEC_PER_SEC * (prescale + 1) * duty / clk_rate
 102          */
 103         val = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_PRESCALE);
 104         prescale = val & SPRD_PWM_PRESCALE_MSK;
 105         tmp = (prescale + 1) * NSEC_PER_SEC * SPRD_PWM_MOD_MAX;
 106         state->period = DIV_ROUND_CLOSEST_ULL(tmp, chn->clk_rate);
 107
 108         val = sprd_pwm_read(spc, pwm->hwpwm, SPRD_PWM_DUTY);
 109         duty = val & SPRD_PWM_DUTY_MSK;
 110         tmp = (prescale + 1) * NSEC_PER_SEC * duty;
 111         state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, chn->clk_rate);
 112
 113         /* Disable PWM clocks if the PWM channel is not in enable state. */
 114         if (!state->enabled)
 115                 clk_bulk_disable_unprepare(SPRD_PWM_CHN_CLKS_NUM, chn->clks);
 116 }
 117
 118 static int sprd_pwm_config(struct sprd_pwm_chip *spc, struct pwm_device *pwm,
 119                            int duty_ns, int period_ns)
 120 {
 121         struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
 122         u32 prescale, duty;
 123         u64 tmp;
 124
 125         /*
 126          * The hardware provides a counter that is feed by the source clock.
 127          * The period length is (PRESCALE + 1) * MOD counter steps.
 128          * The duty cycle length is (PRESCALE + 1) * DUTY counter steps.
 129          *
 130          * To keep the maths simple we're always using MOD = SPRD_PWM_MOD_MAX.
 131          * The value for PRESCALE is selected such that the resulting period
 132          * gets the maximal length not bigger than the requested one with the
 133          * given settings (MOD = SPRD_PWM_MOD_MAX and input clock).
 134          */
 135         duty = duty_ns * SPRD_PWM_MOD_MAX / period_ns;
 136
 137         tmp = (u64)chn->clk_rate * period_ns;
 138         do_div(tmp, NSEC_PER_SEC);
 139         prescale = DIV_ROUND_CLOSEST_ULL(tmp, SPRD_PWM_MOD_MAX) - 1;
 140         if (prescale > SPRD_PWM_PRESCALE_MSK)
 141                 prescale = SPRD_PWM_PRESCALE_MSK;
 142
 143         /*
 144          * Note: Writing DUTY triggers the hardware to actually apply the
 145          * values written to MOD and DUTY to the output, so must keep writing
 146          * DUTY last.
 147          *
 148          * The hardware can ensures that current running period is completed
 149          * before changing a new configuration to avoid mixed settings.
 150          */
 151         sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_PRESCALE, prescale);
 152         sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_MOD, SPRD_PWM_MOD_MAX);
 153         sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_DUTY, duty);
 154
 155         return 0;
 156 }
 157
 158 static int sprd_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 159                           const struct pwm_state *state)
 160 {
 161         struct sprd_pwm_chip *spc =
 162                 container_of(chip, struct sprd_pwm_chip, chip);
 163         struct sprd_pwm_chn *chn = &spc->chn[pwm->hwpwm];
 164         struct pwm_state *cstate = &pwm->state;
 165         int ret;
 166
 167         if (state->enabled) {
 168                 if (!cstate->enabled) {
 169                         /*
 170                          * The clocks to PWM channel has to be enabled first
 171                          * before writing to the registers.
 172                          */
 173                         ret = clk_bulk_prepare_enable(SPRD_PWM_CHN_CLKS_NUM,
 174                                                       chn->clks);
 175                         if (ret) {
 176                                 dev_err(spc->dev,
 177                                         "failed to enable pwm%u clocks\n",
 178                                         pwm->hwpwm);
 179                                 return ret;
 180                         }
 181                 }
 182
 183                 ret = sprd_pwm_config(spc, pwm, state->duty_cycle,
 184                                       state->period);
 185                 if (ret)
 186                         return ret;
 187
 188                 sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_ENABLE, 1);
 189         } else if (cstate->enabled) {
 190                 /*
 191                  * Note: After setting SPRD_PWM_ENABLE to zero, the controller
 192                  * will not wait for current period to be completed, instead it
 193                  * will stop the PWM channel immediately.
 194                  */
 195                 sprd_pwm_write(spc, pwm->hwpwm, SPRD_PWM_ENABLE, 0);
 196
 197                 clk_bulk_disable_unprepare(SPRD_PWM_CHN_CLKS_NUM, chn->clks);
 198         }
 199
 200         return 0;
 201 }
 202
 203 static const struct pwm_ops sprd_pwm_ops = {
 204         .apply = sprd_pwm_apply,
 205         .get_state = sprd_pwm_get_state,
 206         .owner = THIS_MODULE,
 207 };
 208
 209 static int sprd_pwm_clk_init(struct sprd_pwm_chip *spc)
 210 {
 211         struct clk *clk_pwm;
 212         int ret, i;
 213
 214         for (i = 0; i < SPRD_PWM_CHN_NUM; i++) {
 215                 struct sprd_pwm_chn *chn = &spc->chn[i];
 216                 int j;
 217
 218                 for (j = 0; j < SPRD_PWM_CHN_CLKS_NUM; ++j)
 219                         chn->clks[j].id =
 220                                 sprd_pwm_clks[i * SPRD_PWM_CHN_CLKS_NUM + j];
 221
 222                 ret = devm_clk_bulk_get(spc->dev, SPRD_PWM_CHN_CLKS_NUM,
 223                                         chn->clks);
 224                 if (ret) {
 225                         if (ret == -ENOENT)
 226                                 break;
 227
 228                         return dev_err_probe(spc->dev, ret,
 229                                              "failed to get channel clocks\n");
 230                 }
 231
 232                 clk_pwm = chn->clks[SPRD_PWM_CHN_OUTPUT_CLK].clk;
 233                 chn->clk_rate = clk_get_rate(clk_pwm);
 234         }
 235
 236         if (!i) {
 237                 dev_err(spc->dev, "no available PWM channels\n");
 238                 return -ENODEV;
 239         }
 240
 241         spc->num_pwms = i;
 242
 243         return 0;
 244 }
 245
 246 static int sprd_pwm_probe(struct platform_device *pdev)
 247 {
 248         struct sprd_pwm_chip *spc;
 249         int ret;
 250
 251         spc = devm_kzalloc(&pdev->dev, sizeof(*spc), GFP_KERNEL);
 252         if (!spc)
 253                 return -ENOMEM;
 254
 255         spc->base = devm_platform_ioremap_resource(pdev, 0);
 256         if (IS_ERR(spc->base))
 257                 return PTR_ERR(spc->base);
 258
 259         spc->dev = &pdev->dev;
 260         platform_set_drvdata(pdev, spc);
 261
 262         ret = sprd_pwm_clk_init(spc);
 263         if (ret)
 264                 return ret;
 265
 266         spc->chip.dev = &pdev->dev;
 267         spc->chip.ops = &sprd_pwm_ops;
 268         spc->chip.base = -1;
 269         spc->chip.npwm = spc->num_pwms;
 270
 271         ret = pwmchip_add(&spc->chip);
 272         if (ret)
 273                 dev_err(&pdev->dev, "failed to add PWM chip\n");
 274
 275         return ret;
 276 }
 277
 278 static int sprd_pwm_remove(struct platform_device *pdev)
 279 {
 280         struct sprd_pwm_chip *spc = platform_get_drvdata(pdev);
 281
 282         return pwmchip_remove(&spc->chip);
 283 }
 284
 285 static const struct of_device_id sprd_pwm_of_match[] = {
 286         { .compatible = "sprd,ums512-pwm", },
 287         { },
 288 };
 289 MODULE_DEVICE_TABLE(of, sprd_pwm_of_match);
 290
 291 static struct platform_driver sprd_pwm_driver = {
 292         .driver = {
 293                 .name = "sprd-pwm",
 294                 .of_match_table = sprd_pwm_of_match,
 295         },
 296         .probe = sprd_pwm_probe,
 297         .remove = sprd_pwm_remove,
 298 };
 299
 300 module_platform_driver(sprd_pwm_driver);
 301
 302 MODULE_DESCRIPTION("Spreadtrum PWM Driver");
 303 MODULE_LICENSE("GPL v2");