GNU Linux-libre 4.14.251-gnu1
[releases.git] / drivers / power / supply / axp20x_battery.c
1 /*
2  * Battery power supply driver for X-Powers AXP20X and AXP22X PMICs
3  *
4  * Copyright 2016 Free Electrons NextThing Co.
5  *      Quentin Schulz <quentin.schulz@free-electrons.com>
6  *
7  * This driver is based on a previous upstreaming attempt by:
8  *      Bruno PrĂ©mont <bonbons@linux-vserver.org>
9  *
10  * This file is subject to the terms and conditions of the GNU General
11  * Public License. See the file "COPYING" in the main directory of this
12  * archive for more details.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17  * GNU General Public License for more details.
18  */
19
20 #include <linux/err.h>
21 #include <linux/interrupt.h>
22 #include <linux/irq.h>
23 #include <linux/module.h>
24 #include <linux/of.h>
25 #include <linux/of_device.h>
26 #include <linux/platform_device.h>
27 #include <linux/power_supply.h>
28 #include <linux/regmap.h>
29 #include <linux/slab.h>
30 #include <linux/time.h>
31 #include <linux/iio/iio.h>
32 #include <linux/iio/consumer.h>
33 #include <linux/mfd/axp20x.h>
34
35 #define AXP20X_PWR_STATUS_BAT_CHARGING  BIT(2)
36
37 #define AXP20X_PWR_OP_BATT_PRESENT      BIT(5)
38 #define AXP20X_PWR_OP_BATT_ACTIVATED    BIT(3)
39
40 #define AXP209_FG_PERCENT               GENMASK(6, 0)
41 #define AXP22X_FG_VALID                 BIT(7)
42
43 #define AXP20X_CHRG_CTRL1_TGT_VOLT      GENMASK(6, 5)
44 #define AXP20X_CHRG_CTRL1_TGT_4_1V      (0 << 5)
45 #define AXP20X_CHRG_CTRL1_TGT_4_15V     (1 << 5)
46 #define AXP20X_CHRG_CTRL1_TGT_4_2V      (2 << 5)
47 #define AXP20X_CHRG_CTRL1_TGT_4_36V     (3 << 5)
48
49 #define AXP22X_CHRG_CTRL1_TGT_4_22V     (1 << 5)
50 #define AXP22X_CHRG_CTRL1_TGT_4_24V     (3 << 5)
51
52 #define AXP20X_CHRG_CTRL1_TGT_CURR      GENMASK(3, 0)
53
54 #define AXP20X_V_OFF_MASK               GENMASK(2, 0)
55
56 struct axp20x_batt_ps {
57         struct regmap *regmap;
58         struct power_supply *batt;
59         struct device *dev;
60         struct iio_channel *batt_chrg_i;
61         struct iio_channel *batt_dischrg_i;
62         struct iio_channel *batt_v;
63         /* Maximum constant charge current */
64         unsigned int max_ccc;
65         u8 axp_id;
66 };
67
68 static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
69                                           int *val)
70 {
71         int ret, reg;
72
73         ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
74         if (ret)
75                 return ret;
76
77         switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
78         case AXP20X_CHRG_CTRL1_TGT_4_1V:
79                 *val = 4100000;
80                 break;
81         case AXP20X_CHRG_CTRL1_TGT_4_15V:
82                 *val = 4150000;
83                 break;
84         case AXP20X_CHRG_CTRL1_TGT_4_2V:
85                 *val = 4200000;
86                 break;
87         case AXP20X_CHRG_CTRL1_TGT_4_36V:
88                 *val = 4360000;
89                 break;
90         default:
91                 return -EINVAL;
92         }
93
94         return 0;
95 }
96
97 static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
98                                           int *val)
99 {
100         int ret, reg;
101
102         ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
103         if (ret)
104                 return ret;
105
106         switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
107         case AXP20X_CHRG_CTRL1_TGT_4_1V:
108                 *val = 4100000;
109                 break;
110         case AXP20X_CHRG_CTRL1_TGT_4_2V:
111                 *val = 4200000;
112                 break;
113         case AXP22X_CHRG_CTRL1_TGT_4_22V:
114                 *val = 4220000;
115                 break;
116         case AXP22X_CHRG_CTRL1_TGT_4_24V:
117                 *val = 4240000;
118                 break;
119         default:
120                 return -EINVAL;
121         }
122
123         return 0;
124 }
125
126 static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val)
127 {
128         if (axp->axp_id == AXP209_ID)
129                 *val = *val * 100000 + 300000;
130         else
131                 *val = *val * 150000 + 300000;
132 }
133
134 static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val)
135 {
136         if (axp->axp_id == AXP209_ID)
137                 *val = (*val - 300000) / 100000;
138         else
139                 *val = (*val - 300000) / 150000;
140 }
141
142 static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
143                                               int *val)
144 {
145         int ret;
146
147         ret = regmap_read(axp->regmap, AXP20X_CHRG_CTRL1, val);
148         if (ret)
149                 return ret;
150
151         *val &= AXP20X_CHRG_CTRL1_TGT_CURR;
152
153         raw_to_constant_charge_current(axp, val);
154
155         return 0;
156 }
157
158 static int axp20x_battery_get_prop(struct power_supply *psy,
159                                    enum power_supply_property psp,
160                                    union power_supply_propval *val)
161 {
162         struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
163         struct iio_channel *chan;
164         int ret = 0, reg, val1;
165
166         switch (psp) {
167         case POWER_SUPPLY_PROP_PRESENT:
168         case POWER_SUPPLY_PROP_ONLINE:
169                 ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
170                                   &reg);
171                 if (ret)
172                         return ret;
173
174                 val->intval = !!(reg & AXP20X_PWR_OP_BATT_PRESENT);
175                 break;
176
177         case POWER_SUPPLY_PROP_STATUS:
178                 ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
179                                   &reg);
180                 if (ret)
181                         return ret;
182
183                 if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) {
184                         val->intval = POWER_SUPPLY_STATUS_CHARGING;
185                         return 0;
186                 }
187
188                 ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i,
189                                                  &val1);
190                 if (ret)
191                         return ret;
192
193                 if (val1) {
194                         val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
195                         return 0;
196                 }
197
198                 ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1);
199                 if (ret)
200                         return ret;
201
202                 /*
203                  * Fuel Gauge data takes 7 bits but the stored value seems to be
204                  * directly the raw percentage without any scaling to 7 bits.
205                  */
206                 if ((val1 & AXP209_FG_PERCENT) == 100)
207                         val->intval = POWER_SUPPLY_STATUS_FULL;
208                 else
209                         val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
210                 break;
211
212         case POWER_SUPPLY_PROP_HEALTH:
213                 ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
214                                   &val1);
215                 if (ret)
216                         return ret;
217
218                 if (val1 & AXP20X_PWR_OP_BATT_ACTIVATED) {
219                         val->intval = POWER_SUPPLY_HEALTH_DEAD;
220                         return 0;
221                 }
222
223                 val->intval = POWER_SUPPLY_HEALTH_GOOD;
224                 break;
225
226         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
227                 ret = axp20x_get_constant_charge_current(axp20x_batt,
228                                                          &val->intval);
229                 if (ret)
230                         return ret;
231                 break;
232
233         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
234                 val->intval = axp20x_batt->max_ccc;
235                 break;
236
237         case POWER_SUPPLY_PROP_CURRENT_NOW:
238                 ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
239                                   &reg);
240                 if (ret)
241                         return ret;
242
243                 if (reg & AXP20X_PWR_STATUS_BAT_CHARGING)
244                         chan = axp20x_batt->batt_chrg_i;
245                 else
246                         chan = axp20x_batt->batt_dischrg_i;
247
248                 ret = iio_read_channel_processed(chan, &val->intval);
249                 if (ret)
250                         return ret;
251
252                 /* IIO framework gives mA but Power Supply framework gives uA */
253                 val->intval *= 1000;
254                 break;
255
256         case POWER_SUPPLY_PROP_CAPACITY:
257                 /* When no battery is present, return capacity is 100% */
258                 ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
259                                   &reg);
260                 if (ret)
261                         return ret;
262
263                 if (!(reg & AXP20X_PWR_OP_BATT_PRESENT)) {
264                         val->intval = 100;
265                         return 0;
266                 }
267
268                 ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &reg);
269                 if (ret)
270                         return ret;
271
272                 if (axp20x_batt->axp_id == AXP221_ID &&
273                     !(reg & AXP22X_FG_VALID))
274                         return -EINVAL;
275
276                 /*
277                  * Fuel Gauge data takes 7 bits but the stored value seems to be
278                  * directly the raw percentage without any scaling to 7 bits.
279                  */
280                 val->intval = reg & AXP209_FG_PERCENT;
281                 break;
282
283         case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
284                 if (axp20x_batt->axp_id == AXP209_ID)
285                         return axp20x_battery_get_max_voltage(axp20x_batt,
286                                                               &val->intval);
287                 return axp22x_battery_get_max_voltage(axp20x_batt,
288                                                       &val->intval);
289
290         case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
291                 ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, &reg);
292                 if (ret)
293                         return ret;
294
295                 val->intval = 2600000 + 100000 * (reg & AXP20X_V_OFF_MASK);
296                 break;
297
298         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
299                 ret = iio_read_channel_processed(axp20x_batt->batt_v,
300                                                  &val->intval);
301                 if (ret)
302                         return ret;
303
304                 /* IIO framework gives mV but Power Supply framework gives uV */
305                 val->intval *= 1000;
306                 break;
307
308         default:
309                 return -EINVAL;
310         }
311
312         return 0;
313 }
314
315 static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
316                                           int val)
317 {
318         switch (val) {
319         case 4100000:
320                 val = AXP20X_CHRG_CTRL1_TGT_4_1V;
321                 break;
322
323         case 4150000:
324                 if (axp20x_batt->axp_id == AXP221_ID)
325                         return -EINVAL;
326
327                 val = AXP20X_CHRG_CTRL1_TGT_4_15V;
328                 break;
329
330         case 4200000:
331                 val = AXP20X_CHRG_CTRL1_TGT_4_2V;
332                 break;
333
334         default:
335                 /*
336                  * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
337                  * can be set to 4.22V and 4.24V, but these voltages are too
338                  * high for Lithium based batteries (AXP PMICs are supposed to
339                  * be used with these kinds of battery).
340                  */
341                 return -EINVAL;
342         }
343
344         return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
345                                   AXP20X_CHRG_CTRL1_TGT_VOLT, val);
346 }
347
348 static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
349                                               int charge_current)
350 {
351         if (charge_current > axp_batt->max_ccc)
352                 return -EINVAL;
353
354         constant_charge_current_to_raw(axp_batt, &charge_current);
355
356         if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
357                 return -EINVAL;
358
359         return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1,
360                                   AXP20X_CHRG_CTRL1_TGT_CURR, charge_current);
361 }
362
363 static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp,
364                                                   int charge_current)
365 {
366         bool lower_max = false;
367
368         constant_charge_current_to_raw(axp, &charge_current);
369
370         if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
371                 return -EINVAL;
372
373         raw_to_constant_charge_current(axp, &charge_current);
374
375         if (charge_current > axp->max_ccc)
376                 dev_warn(axp->dev,
377                          "Setting max constant charge current higher than previously defined. Note that increasing the constant charge current may damage your battery.\n");
378         else
379                 lower_max = true;
380
381         axp->max_ccc = charge_current;
382
383         if (lower_max) {
384                 int current_cc;
385
386                 axp20x_get_constant_charge_current(axp, &current_cc);
387                 if (current_cc > charge_current)
388                         axp20x_set_constant_charge_current(axp, charge_current);
389         }
390
391         return 0;
392 }
393 static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt,
394                                          int min_voltage)
395 {
396         int val1 = (min_voltage - 2600000) / 100000;
397
398         if (val1 < 0 || val1 > AXP20X_V_OFF_MASK)
399                 return -EINVAL;
400
401         return regmap_update_bits(axp_batt->regmap, AXP20X_V_OFF,
402                                   AXP20X_V_OFF_MASK, val1);
403 }
404
405 static int axp20x_battery_set_prop(struct power_supply *psy,
406                                    enum power_supply_property psp,
407                                    const union power_supply_propval *val)
408 {
409         struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
410
411         switch (psp) {
412         case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
413                 return axp20x_set_voltage_min_design(axp20x_batt, val->intval);
414
415         case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
416                 return axp20x_battery_set_max_voltage(axp20x_batt, val->intval);
417
418         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
419                 return axp20x_set_constant_charge_current(axp20x_batt,
420                                                           val->intval);
421         case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
422                 return axp20x_set_max_constant_charge_current(axp20x_batt,
423                                                               val->intval);
424
425         default:
426                 return -EINVAL;
427         }
428 }
429
430 static enum power_supply_property axp20x_battery_props[] = {
431         POWER_SUPPLY_PROP_PRESENT,
432         POWER_SUPPLY_PROP_ONLINE,
433         POWER_SUPPLY_PROP_STATUS,
434         POWER_SUPPLY_PROP_VOLTAGE_NOW,
435         POWER_SUPPLY_PROP_CURRENT_NOW,
436         POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
437         POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
438         POWER_SUPPLY_PROP_HEALTH,
439         POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
440         POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
441         POWER_SUPPLY_PROP_CAPACITY,
442 };
443
444 static int axp20x_battery_prop_writeable(struct power_supply *psy,
445                                          enum power_supply_property psp)
446 {
447         return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN ||
448                psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN ||
449                psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT ||
450                psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
451 }
452
453 static const struct power_supply_desc axp20x_batt_ps_desc = {
454         .name = "axp20x-battery",
455         .type = POWER_SUPPLY_TYPE_BATTERY,
456         .properties = axp20x_battery_props,
457         .num_properties = ARRAY_SIZE(axp20x_battery_props),
458         .property_is_writeable = axp20x_battery_prop_writeable,
459         .get_property = axp20x_battery_get_prop,
460         .set_property = axp20x_battery_set_prop,
461 };
462
463 static const struct of_device_id axp20x_battery_ps_id[] = {
464         {
465                 .compatible = "x-powers,axp209-battery-power-supply",
466                 .data = (void *)AXP209_ID,
467         }, {
468                 .compatible = "x-powers,axp221-battery-power-supply",
469                 .data = (void *)AXP221_ID,
470         }, { /* sentinel */ },
471 };
472 MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
473
474 static int axp20x_power_probe(struct platform_device *pdev)
475 {
476         struct axp20x_batt_ps *axp20x_batt;
477         struct power_supply_config psy_cfg = {};
478         struct power_supply_battery_info info;
479
480         if (!of_device_is_available(pdev->dev.of_node))
481                 return -ENODEV;
482
483         axp20x_batt = devm_kzalloc(&pdev->dev, sizeof(*axp20x_batt),
484                                    GFP_KERNEL);
485         if (!axp20x_batt)
486                 return -ENOMEM;
487
488         axp20x_batt->dev = &pdev->dev;
489
490         axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v");
491         if (IS_ERR(axp20x_batt->batt_v)) {
492                 if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV)
493                         return -EPROBE_DEFER;
494                 return PTR_ERR(axp20x_batt->batt_v);
495         }
496
497         axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev,
498                                                         "batt_chrg_i");
499         if (IS_ERR(axp20x_batt->batt_chrg_i)) {
500                 if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV)
501                         return -EPROBE_DEFER;
502                 return PTR_ERR(axp20x_batt->batt_chrg_i);
503         }
504
505         axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev,
506                                                            "batt_dischrg_i");
507         if (IS_ERR(axp20x_batt->batt_dischrg_i)) {
508                 if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV)
509                         return -EPROBE_DEFER;
510                 return PTR_ERR(axp20x_batt->batt_dischrg_i);
511         }
512
513         axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
514         platform_set_drvdata(pdev, axp20x_batt);
515
516         psy_cfg.drv_data = axp20x_batt;
517         psy_cfg.of_node = pdev->dev.of_node;
518
519         axp20x_batt->axp_id = (uintptr_t)of_device_get_match_data(&pdev->dev);
520
521         axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
522                                                        &axp20x_batt_ps_desc,
523                                                        &psy_cfg);
524         if (IS_ERR(axp20x_batt->batt)) {
525                 dev_err(&pdev->dev, "failed to register power supply: %ld\n",
526                         PTR_ERR(axp20x_batt->batt));
527                 return PTR_ERR(axp20x_batt->batt);
528         }
529
530         if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) {
531                 int vmin = info.voltage_min_design_uv;
532                 int ccc = info.constant_charge_current_max_ua;
533
534                 if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt,
535                                                               vmin))
536                         dev_err(&pdev->dev,
537                                 "couldn't set voltage_min_design\n");
538
539                 /* Set max to unverified value to be able to set CCC */
540                 axp20x_batt->max_ccc = ccc;
541
542                 if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt,
543                                                                    ccc)) {
544                         dev_err(&pdev->dev,
545                                 "couldn't set constant charge current from DT: fallback to minimum value\n");
546                         ccc = 300000;
547                         axp20x_batt->max_ccc = ccc;
548                         axp20x_set_constant_charge_current(axp20x_batt, ccc);
549                 }
550         }
551
552         /*
553          * Update max CCC to a valid value if battery info is present or set it
554          * to current register value by default.
555          */
556         axp20x_get_constant_charge_current(axp20x_batt,
557                                            &axp20x_batt->max_ccc);
558
559         return 0;
560 }
561
562 static struct platform_driver axp20x_batt_driver = {
563         .probe    = axp20x_power_probe,
564         .driver   = {
565                 .name  = "axp20x-battery-power-supply",
566                 .of_match_table = axp20x_battery_ps_id,
567         },
568 };
569
570 module_platform_driver(axp20x_batt_driver);
571
572 MODULE_DESCRIPTION("Battery power supply driver for AXP20X and AXP22X PMICs");
573 MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
574 MODULE_LICENSE("GPL");