drivers/pinctrl/qcom/pinctrl-qdf2xxx.c

   1 /*
   2  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 and
   6  * only version 2 as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  * GNU General Public License for more details.
  12  *
  13  * GPIO and pin control functions on this SOC are handled by the "TLMM"
  14  * device.  The driver which controls this device is pinctrl-msm.c.  Each
  15  * SOC with a TLMM is expected to create a client driver that registers
  16  * with pinctrl-msm.c.  This means that all TLMM drivers are pin control
  17  * drivers.
  18  *
  19  * This pin control driver is intended to be used only an ACPI-enabled
  20  * system.  As such, UEFI will handle all pin control configuration, so
  21  * this driver does not provide pin control functions.  It is effectively
  22  * a GPIO-only driver.  The alternative is to duplicate the GPIO code of
  23  * pinctrl-msm.c into another driver.
  24  */
  25
  26 #include <linux/module.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/pinctrl/pinctrl.h>
  29 #include <linux/acpi.h>
  30
  31 #include "pinctrl-msm.h"
  32
  33 static struct msm_pinctrl_soc_data qdf2xxx_pinctrl;
  34
  35 /* A reasonable limit to the number of GPIOS */
  36 #define MAX_GPIOS       256
  37
  38 static int qdf2xxx_pinctrl_probe(struct platform_device *pdev)
  39 {
  40         struct pinctrl_pin_desc *pins;
  41         struct msm_pingroup *groups;
  42         unsigned int i;
  43         u32 num_gpios;
  44         int ret;
  45
  46         /* Query the number of GPIOs from ACPI */
  47         ret = device_property_read_u32(&pdev->dev, "num-gpios", &num_gpios);
  48         if (ret < 0) {
  49                 dev_warn(&pdev->dev, "missing num-gpios property\n");
  50                 return ret;
  51         }
  52
  53         if (!num_gpios || num_gpios > MAX_GPIOS) {
  54                 dev_warn(&pdev->dev, "invalid num-gpios property\n");
  55                 return -ENODEV;
  56         }
  57
  58         pins = devm_kcalloc(&pdev->dev, num_gpios,
  59                 sizeof(struct pinctrl_pin_desc), GFP_KERNEL);
  60         groups = devm_kcalloc(&pdev->dev, num_gpios,
  61                 sizeof(struct msm_pingroup), GFP_KERNEL);
  62
  63         if (!pins || !groups)
  64                 return -ENOMEM;
  65
  66         for (i = 0; i < num_gpios; i++) {
  67                 pins[i].number = i;
  68
  69                 groups[i].npins = 1,
  70                 groups[i].pins = &pins[i].number;
  71                 groups[i].ctl_reg = 0x10000 * i;
  72                 groups[i].io_reg = 0x04 + 0x10000 * i;
  73                 groups[i].intr_cfg_reg = 0x08 + 0x10000 * i;
  74                 groups[i].intr_status_reg = 0x0c + 0x10000 * i;
  75                 groups[i].intr_target_reg = 0x08 + 0x10000 * i;
  76
  77                 groups[i].mux_bit = 2;
  78                 groups[i].pull_bit = 0;
  79                 groups[i].drv_bit = 6;
  80                 groups[i].oe_bit = 9;
  81                 groups[i].in_bit = 0;
  82                 groups[i].out_bit = 1;
  83                 groups[i].intr_enable_bit = 0;
  84                 groups[i].intr_status_bit = 0;
  85                 groups[i].intr_target_bit = 5;
  86                 groups[i].intr_target_kpss_val = 1;
  87                 groups[i].intr_raw_status_bit = 4;
  88                 groups[i].intr_polarity_bit = 1;
  89                 groups[i].intr_detection_bit = 2;
  90                 groups[i].intr_detection_width = 2;
  91         }
  92
  93         qdf2xxx_pinctrl.pins = pins;
  94         qdf2xxx_pinctrl.groups = groups;
  95         qdf2xxx_pinctrl.npins = num_gpios;
  96         qdf2xxx_pinctrl.ngroups = num_gpios;
  97         qdf2xxx_pinctrl.ngpios = num_gpios;
  98
  99         return msm_pinctrl_probe(pdev, &qdf2xxx_pinctrl);
 100 }
 101
 102 static const struct acpi_device_id qdf2xxx_acpi_ids[] = {
 103         {"QCOM8001"},
 104         {},
 105 };
 106 MODULE_DEVICE_TABLE(acpi, qdf2xxx_acpi_ids);
 107
 108 static struct platform_driver qdf2xxx_pinctrl_driver = {
 109         .driver = {
 110                 .name = "qdf2xxx-pinctrl",
 111                 .acpi_match_table = ACPI_PTR(qdf2xxx_acpi_ids),
 112         },
 113         .probe = qdf2xxx_pinctrl_probe,
 114         .remove = msm_pinctrl_remove,
 115 };
 116
 117 static int __init qdf2xxx_pinctrl_init(void)
 118 {
 119         return platform_driver_register(&qdf2xxx_pinctrl_driver);
 120 }
 121 arch_initcall(qdf2xxx_pinctrl_init);
 122
 123 static void __exit qdf2xxx_pinctrl_exit(void)
 124 {
 125         platform_driver_unregister(&qdf2xxx_pinctrl_driver);
 126 }
 127 module_exit(qdf2xxx_pinctrl_exit);
 128
 129 MODULE_DESCRIPTION("Qualcomm Technologies QDF2xxx pin control driver");
 130 MODULE_LICENSE("GPL v2");