drivers/phy/ralink/phy-ralink-usb.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright (C) 2017 John Crispin <john@phrozen.org>
   4  *
   5  * Based on code from
   6  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   7  */
   8
   9 #include <linux/delay.h>
  10 #include <linux/err.h>
  11 #include <linux/io.h>
  12 #include <linux/kernel.h>
  13 #include <linux/mfd/syscon.h>
  14 #include <linux/module.h>
  15 #include <linux/mutex.h>
  16 #include <linux/of_platform.h>
  17 #include <linux/phy/phy.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/regmap.h>
  20 #include <linux/reset.h>
  21
  22 #define RT_SYSC_REG_SYSCFG1             0x014
  23 #define RT_SYSC_REG_CLKCFG1             0x030
  24 #define RT_SYSC_REG_USB_PHY_CFG         0x05c
  25
  26 #define OFS_U2_PHY_AC0                  0x800
  27 #define OFS_U2_PHY_AC1                  0x804
  28 #define OFS_U2_PHY_AC2                  0x808
  29 #define OFS_U2_PHY_ACR0                 0x810
  30 #define OFS_U2_PHY_ACR1                 0x814
  31 #define OFS_U2_PHY_ACR2                 0x818
  32 #define OFS_U2_PHY_ACR3                 0x81C
  33 #define OFS_U2_PHY_ACR4                 0x820
  34 #define OFS_U2_PHY_AMON0                0x824
  35 #define OFS_U2_PHY_DCR0                 0x860
  36 #define OFS_U2_PHY_DCR1                 0x864
  37 #define OFS_U2_PHY_DTM0                 0x868
  38 #define OFS_U2_PHY_DTM1                 0x86C
  39
  40 #define RT_RSTCTRL_UDEV                 BIT(25)
  41 #define RT_RSTCTRL_UHST                 BIT(22)
  42 #define RT_SYSCFG1_USB0_HOST_MODE       BIT(10)
  43
  44 #define MT7620_CLKCFG1_UPHY0_CLK_EN     BIT(25)
  45 #define MT7620_CLKCFG1_UPHY1_CLK_EN     BIT(22)
  46 #define RT_CLKCFG1_UPHY1_CLK_EN         BIT(20)
  47 #define RT_CLKCFG1_UPHY0_CLK_EN         BIT(18)
  48
  49 #define USB_PHY_UTMI_8B60M              BIT(1)
  50 #define UDEV_WAKEUP                     BIT(0)
  51
  52 struct ralink_usb_phy {
  53         struct reset_control    *rstdev;
  54         struct reset_control    *rsthost;
  55         u32                     clk;
  56         struct phy              *phy;
  57         void __iomem            *base;
  58         struct regmap           *sysctl;
  59 };
  60
  61 static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg)
  62 {
  63         writel(val, phy->base + reg);
  64 }
  65
  66 static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg)
  67 {
  68         return readl(phy->base + reg);
  69 }
  70
  71 static void ralink_usb_phy_init(struct ralink_usb_phy *phy)
  72 {
  73         u2_phy_r32(phy, OFS_U2_PHY_AC2);
  74         u2_phy_r32(phy, OFS_U2_PHY_ACR0);
  75         u2_phy_r32(phy, OFS_U2_PHY_DCR0);
  76
  77         u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
  78         u2_phy_r32(phy, OFS_U2_PHY_DCR0);
  79         u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
  80         u2_phy_r32(phy, OFS_U2_PHY_DCR0);
  81         u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
  82         u2_phy_r32(phy, OFS_U2_PHY_DCR0);
  83         u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
  84         u2_phy_r32(phy, OFS_U2_PHY_DCR0);
  85         u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
  86         u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
  87         u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
  88         u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
  89 }
  90
  91 static int ralink_usb_phy_power_on(struct phy *_phy)
  92 {
  93         struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
  94         u32 t;
  95
  96         /* enable the phy */
  97         regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
  98                            phy->clk, phy->clk);
  99
 100         /* setup host mode */
 101         regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
 102                            RT_SYSCFG1_USB0_HOST_MODE,
 103                            RT_SYSCFG1_USB0_HOST_MODE);
 104
 105         /* deassert the reset lines */
 106         reset_control_deassert(phy->rsthost);
 107         reset_control_deassert(phy->rstdev);
 108
 109         /*
 110          * The SDK kernel had a delay of 100ms. however on device
 111          * testing showed that 10ms is enough
 112          */
 113         mdelay(10);
 114
 115         if (phy->base)
 116                 ralink_usb_phy_init(phy);
 117
 118         /* print some status info */
 119         regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
 120         dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
 121                 (t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
 122         if (t & USB_PHY_UTMI_8B60M)
 123                 dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
 124         else
 125                 dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
 126
 127         return 0;
 128 }
 129
 130 static int ralink_usb_phy_power_off(struct phy *_phy)
 131 {
 132         struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
 133
 134         /* disable the phy */
 135         regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
 136                            phy->clk, 0);
 137
 138         /* assert the reset lines */
 139         reset_control_assert(phy->rstdev);
 140         reset_control_assert(phy->rsthost);
 141
 142         return 0;
 143 }
 144
 145 static const struct phy_ops ralink_usb_phy_ops = {
 146         .power_on       = ralink_usb_phy_power_on,
 147         .power_off      = ralink_usb_phy_power_off,
 148         .owner          = THIS_MODULE,
 149 };
 150
 151 static const struct of_device_id ralink_usb_phy_of_match[] = {
 152         {
 153                 .compatible = "ralink,rt3352-usbphy",
 154                 .data = (void *)(uintptr_t)(RT_CLKCFG1_UPHY1_CLK_EN |
 155                                             RT_CLKCFG1_UPHY0_CLK_EN)
 156         },
 157         {
 158                 .compatible = "mediatek,mt7620-usbphy",
 159                 .data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
 160                                             MT7620_CLKCFG1_UPHY0_CLK_EN)
 161         },
 162         {
 163                 .compatible = "mediatek,mt7628-usbphy",
 164                 .data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
 165                                             MT7620_CLKCFG1_UPHY0_CLK_EN) },
 166         { },
 167 };
 168 MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
 169
 170 static int ralink_usb_phy_probe(struct platform_device *pdev)
 171 {
 172         struct device *dev = &pdev->dev;
 173         struct resource *res;
 174         struct phy_provider *phy_provider;
 175         const struct of_device_id *match;
 176         struct ralink_usb_phy *phy;
 177
 178         match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
 179         if (!match)
 180                 return -ENODEV;
 181
 182         phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 183         if (!phy)
 184                 return -ENOMEM;
 185
 186         phy->clk = (uintptr_t)match->data;
 187         phy->base = NULL;
 188
 189         phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl");
 190         if (IS_ERR(phy->sysctl)) {
 191                 dev_err(dev, "failed to get sysctl registers\n");
 192                 return PTR_ERR(phy->sysctl);
 193         }
 194
 195         /* The MT7628 and MT7688 require extra setup of PHY registers. */
 196         if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) {
 197                 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 198                 phy->base = devm_ioremap_resource(&pdev->dev, res);
 199                 if (IS_ERR(phy->base)) {
 200                         dev_err(dev, "failed to remap register memory\n");
 201                         return PTR_ERR(phy->base);
 202                 }
 203         }
 204
 205         phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
 206         if (IS_ERR(phy->rsthost)) {
 207                 dev_err(dev, "host reset is missing\n");
 208                 return PTR_ERR(phy->rsthost);
 209         }
 210
 211         phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
 212         if (IS_ERR(phy->rstdev)) {
 213                 dev_err(dev, "device reset is missing\n");
 214                 return PTR_ERR(phy->rstdev);
 215         }
 216
 217         phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
 218         if (IS_ERR(phy->phy)) {
 219                 dev_err(dev, "failed to create PHY\n");
 220                 return PTR_ERR(phy->phy);
 221         }
 222         phy_set_drvdata(phy->phy, phy);
 223
 224         phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 225
 226         return PTR_ERR_OR_ZERO(phy_provider);
 227 }
 228
 229 static struct platform_driver ralink_usb_phy_driver = {
 230         .probe  = ralink_usb_phy_probe,
 231         .driver = {
 232                 .of_match_table = ralink_usb_phy_of_match,
 233                 .name  = "ralink-usb-phy",
 234         }
 235 };
 236 module_platform_driver(ralink_usb_phy_driver);
 237
 238 MODULE_DESCRIPTION("Ralink USB phy driver");
 239 MODULE_AUTHOR("John Crispin <john@phrozen.org>");
 240 MODULE_LICENSE("GPL v2");