drivers/perf/qcom_l3_pmu.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Driver for the L3 cache PMUs in Qualcomm Technologies chips.
   4  *
   5  * The driver supports a distributed cache architecture where the overall
   6  * cache for a socket is comprised of multiple slices each with its own PMU.
   7  * Access to each individual PMU is provided even though all CPUs share all
   8  * the slices. User space needs to aggregate to individual counts to provide
   9  * a global picture.
  10  *
  11  * See Documentation/admin-guide/perf/qcom_l3_pmu.rst for more details.
  12  *
  13  * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
  14  */
  15
  16 #include <linux/acpi.h>
  17 #include <linux/bitops.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/io.h>
  20 #include <linux/list.h>
  21 #include <linux/module.h>
  22 #include <linux/perf_event.h>
  23 #include <linux/platform_device.h>
  24
  25 /*
  26  * General constants
  27  */
  28
  29 /* Number of counters on each PMU */
  30 #define L3_NUM_COUNTERS  8
  31 /* Mask for the event type field within perf_event_attr.config and EVTYPE reg */
  32 #define L3_EVTYPE_MASK   0xFF
  33 /*
  34  * Bit position of the 'long counter' flag within perf_event_attr.config.
  35  * Reserve some space between the event type and this flag to allow expansion
  36  * in the event type field.
  37  */
  38 #define L3_EVENT_LC_BIT  32
  39
  40 /*
  41  * Register offsets
  42  */
  43
  44 /* Perfmon registers */
  45 #define L3_HML3_PM_CR       0x000
  46 #define L3_HML3_PM_EVCNTR(__cntr) (0x420 + ((__cntr) & 0x7) * 8)
  47 #define L3_HML3_PM_CNTCTL(__cntr) (0x120 + ((__cntr) & 0x7) * 8)
  48 #define L3_HML3_PM_EVTYPE(__cntr) (0x220 + ((__cntr) & 0x7) * 8)
  49 #define L3_HML3_PM_FILTRA   0x300
  50 #define L3_HML3_PM_FILTRB   0x308
  51 #define L3_HML3_PM_FILTRC   0x310
  52 #define L3_HML3_PM_FILTRAM  0x304
  53 #define L3_HML3_PM_FILTRBM  0x30C
  54 #define L3_HML3_PM_FILTRCM  0x314
  55
  56 /* Basic counter registers */
  57 #define L3_M_BC_CR         0x500
  58 #define L3_M_BC_SATROLL_CR 0x504
  59 #define L3_M_BC_CNTENSET   0x508
  60 #define L3_M_BC_CNTENCLR   0x50C
  61 #define L3_M_BC_INTENSET   0x510
  62 #define L3_M_BC_INTENCLR   0x514
  63 #define L3_M_BC_GANG       0x718
  64 #define L3_M_BC_OVSR       0x740
  65 #define L3_M_BC_IRQCTL     0x96C
  66
  67 /*
  68  * Bit field definitions
  69  */
  70
  71 /* L3_HML3_PM_CR */
  72 #define PM_CR_RESET           (0)
  73
  74 /* L3_HML3_PM_XCNTCTL/L3_HML3_PM_CNTCTLx */
  75 #define PMCNT_RESET           (0)
  76
  77 /* L3_HML3_PM_EVTYPEx */
  78 #define EVSEL(__val)          ((__val) & L3_EVTYPE_MASK)
  79
  80 /* Reset value for all the filter registers */
  81 #define PM_FLTR_RESET         (0)
  82
  83 /* L3_M_BC_CR */
  84 #define BC_RESET              (1UL << 1)
  85 #define BC_ENABLE             (1UL << 0)
  86
  87 /* L3_M_BC_SATROLL_CR */
  88 #define BC_SATROLL_CR_RESET   (0)
  89
  90 /* L3_M_BC_CNTENSET */
  91 #define PMCNTENSET(__cntr)    (1UL << ((__cntr) & 0x7))
  92
  93 /* L3_M_BC_CNTENCLR */
  94 #define PMCNTENCLR(__cntr)    (1UL << ((__cntr) & 0x7))
  95 #define BC_CNTENCLR_RESET     (0xFF)
  96
  97 /* L3_M_BC_INTENSET */
  98 #define PMINTENSET(__cntr)    (1UL << ((__cntr) & 0x7))
  99
 100 /* L3_M_BC_INTENCLR */
 101 #define PMINTENCLR(__cntr)    (1UL << ((__cntr) & 0x7))
 102 #define BC_INTENCLR_RESET     (0xFF)
 103
 104 /* L3_M_BC_GANG */
 105 #define GANG_EN(__cntr)       (1UL << ((__cntr) & 0x7))
 106 #define BC_GANG_RESET         (0)
 107
 108 /* L3_M_BC_OVSR */
 109 #define PMOVSRCLR(__cntr)     (1UL << ((__cntr) & 0x7))
 110 #define PMOVSRCLR_RESET       (0xFF)
 111
 112 /* L3_M_BC_IRQCTL */
 113 #define PMIRQONMSBEN(__cntr)  (1UL << ((__cntr) & 0x7))
 114 #define BC_IRQCTL_RESET       (0x0)
 115
 116 /*
 117  * Events
 118  */
 119
 120 #define L3_EVENT_CYCLES         0x01
 121 #define L3_EVENT_READ_HIT               0x20
 122 #define L3_EVENT_READ_MISS              0x21
 123 #define L3_EVENT_READ_HIT_D             0x22
 124 #define L3_EVENT_READ_MISS_D            0x23
 125 #define L3_EVENT_WRITE_HIT              0x24
 126 #define L3_EVENT_WRITE_MISS             0x25
 127
 128 /*
 129  * Decoding of settings from perf_event_attr
 130  *
 131  * The config format for perf events is:
 132  * - config: bits 0-7: event type
 133  *           bit  32:  HW counter size requested, 0: 32 bits, 1: 64 bits
 134  */
 135
 136 static inline u32 get_event_type(struct perf_event *event)
 137 {
 138         return (event->attr.config) & L3_EVTYPE_MASK;
 139 }
 140
 141 static inline bool event_uses_long_counter(struct perf_event *event)
 142 {
 143         return !!(event->attr.config & BIT_ULL(L3_EVENT_LC_BIT));
 144 }
 145
 146 static inline int event_num_counters(struct perf_event *event)
 147 {
 148         return event_uses_long_counter(event) ? 2 : 1;
 149 }
 150
 151 /*
 152  * Main PMU, inherits from the core perf PMU type
 153  */
 154 struct l3cache_pmu {
 155         struct pmu              pmu;
 156         struct hlist_node       node;
 157         void __iomem            *regs;
 158         struct perf_event       *events[L3_NUM_COUNTERS];
 159         unsigned long           used_mask[BITS_TO_LONGS(L3_NUM_COUNTERS)];
 160         cpumask_t               cpumask;
 161 };
 162
 163 #define to_l3cache_pmu(p) (container_of(p, struct l3cache_pmu, pmu))
 164
 165 /*
 166  * Type used to group hardware counter operations
 167  *
 168  * Used to implement two types of hardware counters, standard (32bits) and
 169  * long (64bits). The hardware supports counter chaining which we use to
 170  * implement long counters. This support is exposed via the 'lc' flag field
 171  * in perf_event_attr.config.
 172  */
 173 struct l3cache_event_ops {
 174         /* Called to start event monitoring */
 175         void (*start)(struct perf_event *event);
 176         /* Called to stop event monitoring */
 177         void (*stop)(struct perf_event *event, int flags);
 178         /* Called to update the perf_event */
 179         void (*update)(struct perf_event *event);
 180 };
 181
 182 /*
 183  * Implementation of long counter operations
 184  *
 185  * 64bit counters are implemented by chaining two of the 32bit physical
 186  * counters. The PMU only supports chaining of adjacent even/odd pairs
 187  * and for simplicity the driver always configures the odd counter to
 188  * count the overflows of the lower-numbered even counter. Note that since
 189  * the resulting hardware counter is 64bits no IRQs are required to maintain
 190  * the software counter which is also 64bits.
 191  */
 192
 193 static void qcom_l3_cache__64bit_counter_start(struct perf_event *event)
 194 {
 195         struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
 196         int idx = event->hw.idx;
 197         u32 evsel = get_event_type(event);
 198         u32 gang;
 199
 200         /* Set the odd counter to count the overflows of the even counter */
 201         gang = readl_relaxed(l3pmu->regs + L3_M_BC_GANG);
 202         gang |= GANG_EN(idx + 1);
 203         writel_relaxed(gang, l3pmu->regs + L3_M_BC_GANG);
 204
 205         /* Initialize the hardware counters and reset prev_count*/
 206         local64_set(&event->hw.prev_count, 0);
 207         writel_relaxed(0, l3pmu->regs + L3_HML3_PM_EVCNTR(idx + 1));
 208         writel_relaxed(0, l3pmu->regs + L3_HML3_PM_EVCNTR(idx));
 209
 210         /*
 211          * Set the event types, the upper half must use zero and the lower
 212          * half the actual event type
 213          */
 214         writel_relaxed(EVSEL(0), l3pmu->regs + L3_HML3_PM_EVTYPE(idx + 1));
 215         writel_relaxed(EVSEL(evsel), l3pmu->regs + L3_HML3_PM_EVTYPE(idx));
 216
 217         /* Finally, enable the counters */
 218         writel_relaxed(PMCNT_RESET, l3pmu->regs + L3_HML3_PM_CNTCTL(idx + 1));
 219         writel_relaxed(PMCNTENSET(idx + 1), l3pmu->regs + L3_M_BC_CNTENSET);
 220         writel_relaxed(PMCNT_RESET, l3pmu->regs + L3_HML3_PM_CNTCTL(idx));
 221         writel_relaxed(PMCNTENSET(idx), l3pmu->regs + L3_M_BC_CNTENSET);
 222 }
 223
 224 static void qcom_l3_cache__64bit_counter_stop(struct perf_event *event,
 225                                               int flags)
 226 {
 227         struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
 228         int idx = event->hw.idx;
 229         u32 gang = readl_relaxed(l3pmu->regs + L3_M_BC_GANG);
 230
 231         /* Disable the counters */
 232         writel_relaxed(PMCNTENCLR(idx), l3pmu->regs + L3_M_BC_CNTENCLR);
 233         writel_relaxed(PMCNTENCLR(idx + 1), l3pmu->regs + L3_M_BC_CNTENCLR);
 234
 235         /* Disable chaining */
 236         writel_relaxed(gang & ~GANG_EN(idx + 1), l3pmu->regs + L3_M_BC_GANG);
 237 }
 238
 239 static void qcom_l3_cache__64bit_counter_update(struct perf_event *event)
 240 {
 241         struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
 242         int idx = event->hw.idx;
 243         u32 hi, lo;
 244         u64 prev, new;
 245
 246         do {
 247                 prev = local64_read(&event->hw.prev_count);
 248                 do {
 249                         hi = readl_relaxed(l3pmu->regs + L3_HML3_PM_EVCNTR(idx + 1));
 250                         lo = readl_relaxed(l3pmu->regs + L3_HML3_PM_EVCNTR(idx));
 251                 } while (hi != readl_relaxed(l3pmu->regs + L3_HML3_PM_EVCNTR(idx + 1)));
 252                 new = ((u64)hi << 32) | lo;
 253         } while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
 254
 255         local64_add(new - prev, &event->count);
 256 }
 257
 258 static const struct l3cache_event_ops event_ops_long = {
 259         .start = qcom_l3_cache__64bit_counter_start,
 260         .stop = qcom_l3_cache__64bit_counter_stop,
 261         .update = qcom_l3_cache__64bit_counter_update,
 262 };
 263
 264 /*
 265  * Implementation of standard counter operations
 266  *
 267  * 32bit counters use a single physical counter and a hardware feature that
 268  * asserts the overflow IRQ on the toggling of the most significant bit in
 269  * the counter. This feature allows the counters to be left free-running
 270  * without needing the usual reprogramming required to properly handle races
 271  * during concurrent calls to update.
 272  */
 273
 274 static void qcom_l3_cache__32bit_counter_start(struct perf_event *event)
 275 {
 276         struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
 277         int idx = event->hw.idx;
 278         u32 evsel = get_event_type(event);
 279         u32 irqctl = readl_relaxed(l3pmu->regs + L3_M_BC_IRQCTL);
 280
 281         /* Set the counter to assert the overflow IRQ on MSB toggling */
 282         writel_relaxed(irqctl | PMIRQONMSBEN(idx), l3pmu->regs + L3_M_BC_IRQCTL);
 283
 284         /* Initialize the hardware counter and reset prev_count*/
 285         local64_set(&event->hw.prev_count, 0);
 286         writel_relaxed(0, l3pmu->regs + L3_HML3_PM_EVCNTR(idx));
 287
 288         /* Set the event type */
 289         writel_relaxed(EVSEL(evsel), l3pmu->regs + L3_HML3_PM_EVTYPE(idx));
 290
 291         /* Enable interrupt generation by this counter */
 292         writel_relaxed(PMINTENSET(idx), l3pmu->regs + L3_M_BC_INTENSET);
 293
 294         /* Finally, enable the counter */
 295         writel_relaxed(PMCNT_RESET, l3pmu->regs + L3_HML3_PM_CNTCTL(idx));
 296         writel_relaxed(PMCNTENSET(idx), l3pmu->regs + L3_M_BC_CNTENSET);
 297 }
 298
 299 static void qcom_l3_cache__32bit_counter_stop(struct perf_event *event,
 300                                               int flags)
 301 {
 302         struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
 303         int idx = event->hw.idx;
 304         u32 irqctl = readl_relaxed(l3pmu->regs + L3_M_BC_IRQCTL);
 305
 306         /* Disable the counter */
 307         writel_relaxed(PMCNTENCLR(idx), l3pmu->regs + L3_M_BC_CNTENCLR);
 308
 309         /* Disable interrupt generation by this counter */
 310         writel_relaxed(PMINTENCLR(idx), l3pmu->regs + L3_M_BC_INTENCLR);
 311
 312         /* Set the counter to not assert the overflow IRQ on MSB toggling */
 313         writel_relaxed(irqctl & ~PMIRQONMSBEN(idx), l3pmu->regs + L3_M_BC_IRQCTL);
 314 }
 315
 316 static void qcom_l3_cache__32bit_counter_update(struct perf_event *event)
 317 {
 318         struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
 319         int idx = event->hw.idx;
 320         u32 prev, new;
 321
 322         do {
 323                 prev = local64_read(&event->hw.prev_count);
 324                 new = readl_relaxed(l3pmu->regs + L3_HML3_PM_EVCNTR(idx));
 325         } while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
 326
 327         local64_add(new - prev, &event->count);
 328 }
 329
 330 static const struct l3cache_event_ops event_ops_std = {
 331         .start = qcom_l3_cache__32bit_counter_start,
 332         .stop = qcom_l3_cache__32bit_counter_stop,
 333         .update = qcom_l3_cache__32bit_counter_update,
 334 };
 335
 336 /* Retrieve the appropriate operations for the given event */
 337 static
 338 const struct l3cache_event_ops *l3cache_event_get_ops(struct perf_event *event)
 339 {
 340         if (event_uses_long_counter(event))
 341                 return &event_ops_long;
 342         else
 343                 return &event_ops_std;
 344 }
 345
 346 /*
 347  * Top level PMU functions.
 348  */
 349
 350 static inline void qcom_l3_cache__init(struct l3cache_pmu *l3pmu)
 351 {
 352         int i;
 353
 354         writel_relaxed(BC_RESET, l3pmu->regs + L3_M_BC_CR);
 355
 356         /*
 357          * Use writel for the first programming command to ensure the basic
 358          * counter unit is stopped before proceeding
 359          */
 360         writel(BC_SATROLL_CR_RESET, l3pmu->regs + L3_M_BC_SATROLL_CR);
 361
 362         writel_relaxed(BC_CNTENCLR_RESET, l3pmu->regs + L3_M_BC_CNTENCLR);
 363         writel_relaxed(BC_INTENCLR_RESET, l3pmu->regs + L3_M_BC_INTENCLR);
 364         writel_relaxed(PMOVSRCLR_RESET, l3pmu->regs + L3_M_BC_OVSR);
 365         writel_relaxed(BC_GANG_RESET, l3pmu->regs + L3_M_BC_GANG);
 366         writel_relaxed(BC_IRQCTL_RESET, l3pmu->regs + L3_M_BC_IRQCTL);
 367         writel_relaxed(PM_CR_RESET, l3pmu->regs + L3_HML3_PM_CR);
 368
 369         for (i = 0; i < L3_NUM_COUNTERS; ++i) {
 370                 writel_relaxed(PMCNT_RESET, l3pmu->regs + L3_HML3_PM_CNTCTL(i));
 371                 writel_relaxed(EVSEL(0), l3pmu->regs + L3_HML3_PM_EVTYPE(i));
 372         }
 373
 374         writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRA);
 375         writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRAM);
 376         writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRB);
 377         writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRBM);
 378         writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRC);
 379         writel_relaxed(PM_FLTR_RESET, l3pmu->regs + L3_HML3_PM_FILTRCM);
 380
 381         /*
 382          * Use writel here to ensure all programming commands are done
 383          *  before proceeding
 384          */
 385         writel(BC_ENABLE, l3pmu->regs + L3_M_BC_CR);
 386 }
 387
 388 static irqreturn_t qcom_l3_cache__handle_irq(int irq_num, void *data)
 389 {
 390         struct l3cache_pmu *l3pmu = data;
 391         /* Read the overflow status register */
 392         long status = readl_relaxed(l3pmu->regs + L3_M_BC_OVSR);
 393         int idx;
 394
 395         if (status == 0)
 396                 return IRQ_NONE;
 397
 398         /* Clear the bits we read on the overflow status register */
 399         writel_relaxed(status, l3pmu->regs + L3_M_BC_OVSR);
 400
 401         for_each_set_bit(idx, &status, L3_NUM_COUNTERS) {
 402                 struct perf_event *event;
 403                 const struct l3cache_event_ops *ops;
 404
 405                 event = l3pmu->events[idx];
 406                 if (!event)
 407                         continue;
 408
 409                 /*
 410                  * Since the IRQ is not enabled for events using long counters
 411                  * we should never see one of those here, however, be consistent
 412                  * and use the ops indirections like in the other operations.
 413                  */
 414
 415                 ops = l3cache_event_get_ops(event);
 416                 ops->update(event);
 417         }
 418
 419         return IRQ_HANDLED;
 420 }
 421
 422 /*
 423  * Implementation of abstract pmu functionality required by
 424  * the core perf events code.
 425  */
 426
 427 static void qcom_l3_cache__pmu_enable(struct pmu *pmu)
 428 {
 429         struct l3cache_pmu *l3pmu = to_l3cache_pmu(pmu);
 430
 431         /* Ensure the other programming commands are observed before enabling */
 432         wmb();
 433
 434         writel_relaxed(BC_ENABLE, l3pmu->regs + L3_M_BC_CR);
 435 }
 436
 437 static void qcom_l3_cache__pmu_disable(struct pmu *pmu)
 438 {
 439         struct l3cache_pmu *l3pmu = to_l3cache_pmu(pmu);
 440
 441         writel_relaxed(0, l3pmu->regs + L3_M_BC_CR);
 442
 443         /* Ensure the basic counter unit is stopped before proceeding */
 444         wmb();
 445 }
 446
 447 /*
 448  * We must NOT create groups containing events from multiple hardware PMUs,
 449  * although mixing different software and hardware PMUs is allowed.
 450  */
 451 static bool qcom_l3_cache__validate_event_group(struct perf_event *event)
 452 {
 453         struct perf_event *leader = event->group_leader;
 454         struct perf_event *sibling;
 455         int counters = 0;
 456
 457         if (leader->pmu != event->pmu && !is_software_event(leader))
 458                 return false;
 459
 460         counters = event_num_counters(event);
 461         counters += event_num_counters(leader);
 462
 463         for_each_sibling_event(sibling, leader) {
 464                 if (is_software_event(sibling))
 465                         continue;
 466                 if (sibling->pmu != event->pmu)
 467                         return false;
 468                 counters += event_num_counters(sibling);
 469         }
 470
 471         /*
 472          * If the group requires more counters than the HW has, it
 473          * cannot ever be scheduled.
 474          */
 475         return counters <= L3_NUM_COUNTERS;
 476 }
 477
 478 static int qcom_l3_cache__event_init(struct perf_event *event)
 479 {
 480         struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
 481         struct hw_perf_event *hwc = &event->hw;
 482
 483         /*
 484          * Is the event for this PMU?
 485          */
 486         if (event->attr.type != event->pmu->type)
 487                 return -ENOENT;
 488
 489         /*
 490          * Sampling not supported since these events are not core-attributable.
 491          */
 492         if (hwc->sample_period)
 493                 return -EINVAL;
 494
 495         /*
 496          * Task mode not available, we run the counters as socket counters,
 497          * not attributable to any CPU and therefore cannot attribute per-task.
 498          */
 499         if (event->cpu < 0)
 500                 return -EINVAL;
 501
 502         /* Validate the group */
 503         if (!qcom_l3_cache__validate_event_group(event))
 504                 return -EINVAL;
 505
 506         hwc->idx = -1;
 507
 508         /*
 509          * Many perf core operations (eg. events rotation) operate on a
 510          * single CPU context. This is obvious for CPU PMUs, where one
 511          * expects the same sets of events being observed on all CPUs,
 512          * but can lead to issues for off-core PMUs, like this one, where
 513          * each event could be theoretically assigned to a different CPU.
 514          * To mitigate this, we enforce CPU assignment to one designated
 515          * processor (the one described in the "cpumask" attribute exported
 516          * by the PMU device). perf user space tools honor this and avoid
 517          * opening more than one copy of the events.
 518          */
 519         event->cpu = cpumask_first(&l3pmu->cpumask);
 520
 521         return 0;
 522 }
 523
 524 static void qcom_l3_cache__event_start(struct perf_event *event, int flags)
 525 {
 526         struct hw_perf_event *hwc = &event->hw;
 527         const struct l3cache_event_ops *ops = l3cache_event_get_ops(event);
 528
 529         hwc->state = 0;
 530         ops->start(event);
 531 }
 532
 533 static void qcom_l3_cache__event_stop(struct perf_event *event, int flags)
 534 {
 535         struct hw_perf_event *hwc = &event->hw;
 536         const struct l3cache_event_ops *ops = l3cache_event_get_ops(event);
 537
 538         if (hwc->state & PERF_HES_STOPPED)
 539                 return;
 540
 541         ops->stop(event, flags);
 542         if (flags & PERF_EF_UPDATE)
 543                 ops->update(event);
 544         hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 545 }
 546
 547 static int qcom_l3_cache__event_add(struct perf_event *event, int flags)
 548 {
 549         struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
 550         struct hw_perf_event *hwc = &event->hw;
 551         int order = event_uses_long_counter(event) ? 1 : 0;
 552         int idx;
 553
 554         /*
 555          * Try to allocate a counter.
 556          */
 557         idx = bitmap_find_free_region(l3pmu->used_mask, L3_NUM_COUNTERS, order);
 558         if (idx < 0)
 559                 /* The counters are all in use. */
 560                 return -EAGAIN;
 561
 562         hwc->idx = idx;
 563         hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
 564         l3pmu->events[idx] = event;
 565
 566         if (flags & PERF_EF_START)
 567                 qcom_l3_cache__event_start(event, 0);
 568
 569         /* Propagate changes to the userspace mapping. */
 570         perf_event_update_userpage(event);
 571
 572         return 0;
 573 }
 574
 575 static void qcom_l3_cache__event_del(struct perf_event *event, int flags)
 576 {
 577         struct l3cache_pmu *l3pmu = to_l3cache_pmu(event->pmu);
 578         struct hw_perf_event *hwc = &event->hw;
 579         int order = event_uses_long_counter(event) ? 1 : 0;
 580
 581         /* Stop and clean up */
 582         qcom_l3_cache__event_stop(event,  flags | PERF_EF_UPDATE);
 583         l3pmu->events[hwc->idx] = NULL;
 584         bitmap_release_region(l3pmu->used_mask, hwc->idx, order);
 585
 586         /* Propagate changes to the userspace mapping. */
 587         perf_event_update_userpage(event);
 588 }
 589
 590 static void qcom_l3_cache__event_read(struct perf_event *event)
 591 {
 592         const struct l3cache_event_ops *ops = l3cache_event_get_ops(event);
 593
 594         ops->update(event);
 595 }
 596
 597 /*
 598  * Add sysfs attributes
 599  *
 600  * We export:
 601  * - formats, used by perf user space and other tools to configure events
 602  * - events, used by perf user space and other tools to create events
 603  *   symbolically, e.g.:
 604  *     perf stat -a -e l3cache_0_0/event=read-miss/ ls
 605  *     perf stat -a -e l3cache_0_0/event=0x21/ ls
 606  * - cpumask, used by perf user space and other tools to know on which CPUs
 607  *   to open the events
 608  */
 609
 610 /* formats */
 611
 612 static ssize_t l3cache_pmu_format_show(struct device *dev,
 613                                        struct device_attribute *attr, char *buf)
 614 {
 615         struct dev_ext_attribute *eattr;
 616
 617         eattr = container_of(attr, struct dev_ext_attribute, attr);
 618         return sysfs_emit(buf, "%s\n", (char *) eattr->var);
 619 }
 620
 621 #define L3CACHE_PMU_FORMAT_ATTR(_name, _config)                               \
 622         (&((struct dev_ext_attribute[]) {                                     \
 623                 { .attr = __ATTR(_name, 0444, l3cache_pmu_format_show, NULL), \
 624                   .var = (void *) _config, }                                  \
 625         })[0].attr.attr)
 626
 627 static struct attribute *qcom_l3_cache_pmu_formats[] = {
 628         L3CACHE_PMU_FORMAT_ATTR(event, "config:0-7"),
 629         L3CACHE_PMU_FORMAT_ATTR(lc, "config:" __stringify(L3_EVENT_LC_BIT)),
 630         NULL,
 631 };
 632
 633 static const struct attribute_group qcom_l3_cache_pmu_format_group = {
 634         .name = "format",
 635         .attrs = qcom_l3_cache_pmu_formats,
 636 };
 637
 638 /* events */
 639
 640 static ssize_t l3cache_pmu_event_show(struct device *dev,
 641                                      struct device_attribute *attr, char *page)
 642 {
 643         struct perf_pmu_events_attr *pmu_attr;
 644
 645         pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
 646         return sysfs_emit(page, "event=0x%02llx\n", pmu_attr->id);
 647 }
 648
 649 #define L3CACHE_EVENT_ATTR(_name, _id)                                       \
 650         PMU_EVENT_ATTR_ID(_name, l3cache_pmu_event_show, _id)
 651
 652 static struct attribute *qcom_l3_cache_pmu_events[] = {
 653         L3CACHE_EVENT_ATTR(cycles, L3_EVENT_CYCLES),
 654         L3CACHE_EVENT_ATTR(read-hit, L3_EVENT_READ_HIT),
 655         L3CACHE_EVENT_ATTR(read-miss, L3_EVENT_READ_MISS),
 656         L3CACHE_EVENT_ATTR(read-hit-d-side, L3_EVENT_READ_HIT_D),
 657         L3CACHE_EVENT_ATTR(read-miss-d-side, L3_EVENT_READ_MISS_D),
 658         L3CACHE_EVENT_ATTR(write-hit, L3_EVENT_WRITE_HIT),
 659         L3CACHE_EVENT_ATTR(write-miss, L3_EVENT_WRITE_MISS),
 660         NULL
 661 };
 662
 663 static const struct attribute_group qcom_l3_cache_pmu_events_group = {
 664         .name = "events",
 665         .attrs = qcom_l3_cache_pmu_events,
 666 };
 667
 668 /* cpumask */
 669
 670 static ssize_t cpumask_show(struct device *dev,
 671                             struct device_attribute *attr, char *buf)
 672 {
 673         struct l3cache_pmu *l3pmu = to_l3cache_pmu(dev_get_drvdata(dev));
 674
 675         return cpumap_print_to_pagebuf(true, buf, &l3pmu->cpumask);
 676 }
 677
 678 static DEVICE_ATTR_RO(cpumask);
 679
 680 static struct attribute *qcom_l3_cache_pmu_cpumask_attrs[] = {
 681         &dev_attr_cpumask.attr,
 682         NULL,
 683 };
 684
 685 static const struct attribute_group qcom_l3_cache_pmu_cpumask_attr_group = {
 686         .attrs = qcom_l3_cache_pmu_cpumask_attrs,
 687 };
 688
 689 /*
 690  * Per PMU device attribute groups
 691  */
 692 static const struct attribute_group *qcom_l3_cache_pmu_attr_grps[] = {
 693         &qcom_l3_cache_pmu_format_group,
 694         &qcom_l3_cache_pmu_events_group,
 695         &qcom_l3_cache_pmu_cpumask_attr_group,
 696         NULL,
 697 };
 698
 699 /*
 700  * Probing functions and data.
 701  */
 702
 703 static int qcom_l3_cache_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
 704 {
 705         struct l3cache_pmu *l3pmu = hlist_entry_safe(node, struct l3cache_pmu, node);
 706
 707         /* If there is not a CPU/PMU association pick this CPU */
 708         if (cpumask_empty(&l3pmu->cpumask))
 709                 cpumask_set_cpu(cpu, &l3pmu->cpumask);
 710
 711         return 0;
 712 }
 713
 714 static int qcom_l3_cache_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
 715 {
 716         struct l3cache_pmu *l3pmu = hlist_entry_safe(node, struct l3cache_pmu, node);
 717         unsigned int target;
 718
 719         if (!cpumask_test_and_clear_cpu(cpu, &l3pmu->cpumask))
 720                 return 0;
 721         target = cpumask_any_but(cpu_online_mask, cpu);
 722         if (target >= nr_cpu_ids)
 723                 return 0;
 724         perf_pmu_migrate_context(&l3pmu->pmu, cpu, target);
 725         cpumask_set_cpu(target, &l3pmu->cpumask);
 726         return 0;
 727 }
 728
 729 static int qcom_l3_cache_pmu_probe(struct platform_device *pdev)
 730 {
 731         struct l3cache_pmu *l3pmu;
 732         struct acpi_device *acpi_dev;
 733         struct resource *memrc;
 734         int ret;
 735         char *name;
 736
 737         /* Initialize the PMU data structures */
 738
 739         acpi_dev = ACPI_COMPANION(&pdev->dev);
 740         if (!acpi_dev)
 741                 return -ENODEV;
 742
 743         l3pmu = devm_kzalloc(&pdev->dev, sizeof(*l3pmu), GFP_KERNEL);
 744         name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "l3cache_%s_%s",
 745                       acpi_dev->parent->pnp.unique_id, acpi_dev->pnp.unique_id);
 746         if (!l3pmu || !name)
 747                 return -ENOMEM;
 748
 749         l3pmu->pmu = (struct pmu) {
 750                 .task_ctx_nr    = perf_invalid_context,
 751
 752                 .pmu_enable     = qcom_l3_cache__pmu_enable,
 753                 .pmu_disable    = qcom_l3_cache__pmu_disable,
 754                 .event_init     = qcom_l3_cache__event_init,
 755                 .add            = qcom_l3_cache__event_add,
 756                 .del            = qcom_l3_cache__event_del,
 757                 .start          = qcom_l3_cache__event_start,
 758                 .stop           = qcom_l3_cache__event_stop,
 759                 .read           = qcom_l3_cache__event_read,
 760
 761                 .attr_groups    = qcom_l3_cache_pmu_attr_grps,
 762                 .capabilities   = PERF_PMU_CAP_NO_EXCLUDE,
 763         };
 764
 765         memrc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 766         l3pmu->regs = devm_ioremap_resource(&pdev->dev, memrc);
 767         if (IS_ERR(l3pmu->regs))
 768                 return PTR_ERR(l3pmu->regs);
 769
 770         qcom_l3_cache__init(l3pmu);
 771
 772         ret = platform_get_irq(pdev, 0);
 773         if (ret <= 0)
 774                 return ret;
 775
 776         ret = devm_request_irq(&pdev->dev, ret, qcom_l3_cache__handle_irq, 0,
 777                                name, l3pmu);
 778         if (ret) {
 779                 dev_err(&pdev->dev, "Request for IRQ failed for slice @%pa\n",
 780                         &memrc->start);
 781                 return ret;
 782         }
 783
 784         /* Add this instance to the list used by the offline callback */
 785         ret = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_QCOM_L3_ONLINE, &l3pmu->node);
 786         if (ret) {
 787                 dev_err(&pdev->dev, "Error %d registering hotplug", ret);
 788                 return ret;
 789         }
 790
 791         ret = perf_pmu_register(&l3pmu->pmu, name, -1);
 792         if (ret < 0) {
 793                 dev_err(&pdev->dev, "Failed to register L3 cache PMU (%d)\n", ret);
 794                 return ret;
 795         }
 796
 797         dev_info(&pdev->dev, "Registered %s, type: %d\n", name, l3pmu->pmu.type);
 798
 799         return 0;
 800 }
 801
 802 static const struct acpi_device_id qcom_l3_cache_pmu_acpi_match[] = {
 803         { "QCOM8081", },
 804         { }
 805 };
 806 MODULE_DEVICE_TABLE(acpi, qcom_l3_cache_pmu_acpi_match);
 807
 808 static struct platform_driver qcom_l3_cache_pmu_driver = {
 809         .driver = {
 810                 .name = "qcom-l3cache-pmu",
 811                 .acpi_match_table = ACPI_PTR(qcom_l3_cache_pmu_acpi_match),
 812                 .suppress_bind_attrs = true,
 813         },
 814         .probe = qcom_l3_cache_pmu_probe,
 815 };
 816
 817 static int __init register_qcom_l3_cache_pmu_driver(void)
 818 {
 819         int ret;
 820
 821         /* Install a hook to update the reader CPU in case it goes offline */
 822         ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_QCOM_L3_ONLINE,
 823                                       "perf/qcom/l3cache:online",
 824                                       qcom_l3_cache_pmu_online_cpu,
 825                                       qcom_l3_cache_pmu_offline_cpu);
 826         if (ret)
 827                 return ret;
 828
 829         return platform_driver_register(&qcom_l3_cache_pmu_driver);
 830 }
 831 device_initcall(register_qcom_l3_cache_pmu_driver);