GNU Linux-libre 5.19-rc6-gnu
[releases.git] / drivers / pcmcia / at91_cf.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * at91_cf.c -- AT91 CompactFlash controller driver
4  *
5  * Copyright (C) 2005 David Brownell
6  */
7
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/platform_device.h>
11 #include <linux/errno.h>
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/slab.h>
15 #include <linux/gpio.h>
16 #include <linux/io.h>
17 #include <linux/sizes.h>
18 #include <linux/mfd/syscon.h>
19 #include <linux/mfd/syscon/atmel-mc.h>
20 #include <linux/of.h>
21 #include <linux/of_device.h>
22 #include <linux/of_gpio.h>
23 #include <linux/pci.h>
24 #include <linux/regmap.h>
25
26 #include <pcmcia/ss.h>
27
28 /*
29  * A0..A10 work in each range; A23 indicates I/O space;  A25 is CFRNW;
30  * some other bit in {A24,A22..A11} is nREG to flag memory access
31  * (vs attributes).  So more than 2KB/region would just be waste.
32  * Note: These are offsets from the physical base address.
33  */
34 #define CF_ATTR_PHYS    (0)
35 #define CF_IO_PHYS      (1 << 23)
36 #define CF_MEM_PHYS     (0x017ff800)
37
38 struct at91_cf_data {
39         int     irq_pin;                /* I/O IRQ */
40         int     det_pin;                /* Card detect */
41         int     vcc_pin;                /* power switching */
42         int     rst_pin;                /* card reset */
43         u8      chipselect;             /* EBI Chip Select number */
44         u8      flags;
45 #define AT91_CF_TRUE_IDE        0x01
46 #define AT91_IDE_SWAP_A0_A2     0x02
47 };
48
49 struct regmap *mc;
50
51 /*--------------------------------------------------------------------------*/
52
53 struct at91_cf_socket {
54         struct pcmcia_socket    socket;
55
56         unsigned                present:1;
57
58         struct platform_device  *pdev;
59         struct at91_cf_data     *board;
60
61         unsigned long           phys_baseaddr;
62 };
63
64 static inline int at91_cf_present(struct at91_cf_socket *cf)
65 {
66         return !gpio_get_value(cf->board->det_pin);
67 }
68
69 /*--------------------------------------------------------------------------*/
70
71 static int at91_cf_ss_init(struct pcmcia_socket *s)
72 {
73         return 0;
74 }
75
76 static irqreturn_t at91_cf_irq(int irq, void *_cf)
77 {
78         struct at91_cf_socket *cf = _cf;
79
80         if (irq == gpio_to_irq(cf->board->det_pin)) {
81                 unsigned present = at91_cf_present(cf);
82
83                 /* kick pccard as needed */
84                 if (present != cf->present) {
85                         cf->present = present;
86                         dev_dbg(&cf->pdev->dev, "card %s\n",
87                                         present ? "present" : "gone");
88                         pcmcia_parse_events(&cf->socket, SS_DETECT);
89                 }
90         }
91
92         return IRQ_HANDLED;
93 }
94
95 static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
96 {
97         struct at91_cf_socket   *cf;
98
99         if (!sp)
100                 return -EINVAL;
101
102         cf = container_of(s, struct at91_cf_socket, socket);
103
104         /* NOTE: CF is always 3VCARD */
105         if (at91_cf_present(cf)) {
106                 int rdy = gpio_is_valid(cf->board->irq_pin);    /* RDY/nIRQ */
107                 int vcc = gpio_is_valid(cf->board->vcc_pin);
108
109                 *sp = SS_DETECT | SS_3VCARD;
110                 if (!rdy || gpio_get_value(cf->board->irq_pin))
111                         *sp |= SS_READY;
112                 if (!vcc || gpio_get_value(cf->board->vcc_pin))
113                         *sp |= SS_POWERON;
114         } else
115                 *sp = 0;
116
117         return 0;
118 }
119
120 static int
121 at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
122 {
123         struct at91_cf_socket   *cf;
124
125         cf = container_of(sock, struct at91_cf_socket, socket);
126
127         /* switch Vcc if needed and possible */
128         if (gpio_is_valid(cf->board->vcc_pin)) {
129                 switch (s->Vcc) {
130                 case 0:
131                         gpio_set_value(cf->board->vcc_pin, 0);
132                         break;
133                 case 33:
134                         gpio_set_value(cf->board->vcc_pin, 1);
135                         break;
136                 default:
137                         return -EINVAL;
138                 }
139         }
140
141         /* toggle reset if needed */
142         gpio_set_value(cf->board->rst_pin, s->flags & SS_RESET);
143
144         dev_dbg(&cf->pdev->dev, "Vcc %d, io_irq %d, flags %04x csc %04x\n",
145                                 s->Vcc, s->io_irq, s->flags, s->csc_mask);
146
147         return 0;
148 }
149
150 static int at91_cf_ss_suspend(struct pcmcia_socket *s)
151 {
152         return at91_cf_set_socket(s, &dead_socket);
153 }
154
155 /* we already mapped the I/O region */
156 static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
157 {
158         struct at91_cf_socket   *cf;
159         u32                     csr;
160
161         cf = container_of(s, struct at91_cf_socket, socket);
162         io->flags &= (MAP_ACTIVE | MAP_16BIT | MAP_AUTOSZ);
163
164         /*
165          * Use 16 bit accesses unless/until we need 8-bit i/o space.
166          *
167          * NOTE: this CF controller ignores IOIS16, so we can't really do
168          * MAP_AUTOSZ.  The 16bit mode allows single byte access on either
169          * D0-D7 (even addr) or D8-D15 (odd), so it's close enough for many
170          * purposes (and handles ide-cs).
171          *
172          * The 8bit mode is needed for odd byte access on D0-D7.  It seems
173          * some cards only like that way to get at the odd byte, despite
174          * CF 3.0 spec table 35 also giving the D8-D15 option.
175          */
176         if (!(io->flags & (MAP_16BIT | MAP_AUTOSZ))) {
177                 csr = AT91_MC_SMC_DBW_8;
178                 dev_dbg(&cf->pdev->dev, "8bit i/o bus\n");
179         } else {
180                 csr = AT91_MC_SMC_DBW_16;
181                 dev_dbg(&cf->pdev->dev, "16bit i/o bus\n");
182         }
183         regmap_update_bits(mc, AT91_MC_SMC_CSR(cf->board->chipselect),
184                            AT91_MC_SMC_DBW, csr);
185
186         io->start = cf->socket.io_offset;
187         io->stop = io->start + SZ_2K - 1;
188
189         return 0;
190 }
191
192 /* pcmcia layer maps/unmaps mem regions */
193 static int
194 at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
195 {
196         struct at91_cf_socket   *cf;
197
198         if (map->card_start)
199                 return -EINVAL;
200
201         cf = container_of(s, struct at91_cf_socket, socket);
202
203         map->flags &= (MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT);
204         if (map->flags & MAP_ATTRIB)
205                 map->static_start = cf->phys_baseaddr + CF_ATTR_PHYS;
206         else
207                 map->static_start = cf->phys_baseaddr + CF_MEM_PHYS;
208
209         return 0;
210 }
211
212 static struct pccard_operations at91_cf_ops = {
213         .init                   = at91_cf_ss_init,
214         .suspend                = at91_cf_ss_suspend,
215         .get_status             = at91_cf_get_status,
216         .set_socket             = at91_cf_set_socket,
217         .set_io_map             = at91_cf_set_io_map,
218         .set_mem_map            = at91_cf_set_mem_map,
219 };
220
221 /*--------------------------------------------------------------------------*/
222
223 static const struct of_device_id at91_cf_dt_ids[] = {
224         { .compatible = "atmel,at91rm9200-cf" },
225         { /* sentinel */ }
226 };
227 MODULE_DEVICE_TABLE(of, at91_cf_dt_ids);
228
229 static int at91_cf_probe(struct platform_device *pdev)
230 {
231         struct at91_cf_socket   *cf;
232         struct at91_cf_data     *board;
233         struct resource         *io;
234         struct resource         realio;
235         int                     status;
236
237         board = devm_kzalloc(&pdev->dev, sizeof(*board), GFP_KERNEL);
238         if (!board)
239                 return -ENOMEM;
240
241         board->irq_pin = of_get_gpio(pdev->dev.of_node, 0);
242         board->det_pin = of_get_gpio(pdev->dev.of_node, 1);
243         board->vcc_pin = of_get_gpio(pdev->dev.of_node, 2);
244         board->rst_pin = of_get_gpio(pdev->dev.of_node, 3);
245
246         mc = syscon_regmap_lookup_by_compatible("atmel,at91rm9200-sdramc");
247         if (IS_ERR(mc))
248                 return PTR_ERR(mc);
249
250         if (!gpio_is_valid(board->det_pin) || !gpio_is_valid(board->rst_pin))
251                 return -ENODEV;
252
253         io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
254         if (!io)
255                 return -ENODEV;
256
257         cf = devm_kzalloc(&pdev->dev, sizeof(*cf), GFP_KERNEL);
258         if (!cf)
259                 return -ENOMEM;
260
261         cf->board = board;
262         cf->pdev = pdev;
263         cf->phys_baseaddr = io->start;
264         platform_set_drvdata(pdev, cf);
265
266         /* must be a GPIO; ergo must trigger on both edges */
267         status = devm_gpio_request(&pdev->dev, board->det_pin, "cf_det");
268         if (status < 0)
269                 return status;
270
271         status = devm_request_irq(&pdev->dev, gpio_to_irq(board->det_pin),
272                                         at91_cf_irq, 0, "at91_cf detect", cf);
273         if (status < 0)
274                 return status;
275
276         device_init_wakeup(&pdev->dev, 1);
277
278         status = devm_gpio_request(&pdev->dev, board->rst_pin, "cf_rst");
279         if (status < 0)
280                 goto fail0a;
281
282         if (gpio_is_valid(board->vcc_pin)) {
283                 status = devm_gpio_request(&pdev->dev, board->vcc_pin, "cf_vcc");
284                 if (status < 0)
285                         goto fail0a;
286         }
287
288         /*
289          * The card driver will request this irq later as needed.
290          * but it causes lots of "irqNN: nobody cared" messages
291          * unless we report that we handle everything (sigh).
292          * (Note:  DK board doesn't wire the IRQ pin...)
293          */
294         if (gpio_is_valid(board->irq_pin)) {
295                 status = devm_gpio_request(&pdev->dev, board->irq_pin, "cf_irq");
296                 if (status < 0)
297                         goto fail0a;
298
299                 status = devm_request_irq(&pdev->dev, gpio_to_irq(board->irq_pin),
300                                         at91_cf_irq, IRQF_SHARED, "at91_cf", cf);
301                 if (status < 0)
302                         goto fail0a;
303                 cf->socket.pci_irq = gpio_to_irq(board->irq_pin);
304         } else
305                 cf->socket.pci_irq = nr_irqs + 1;
306
307         /*
308          * pcmcia layer only remaps "real" memory not iospace
309          * io_offset is set to 0x10000 to avoid the check in static_find_io().
310          * */
311         cf->socket.io_offset = 0x10000;
312         realio.start = cf->socket.io_offset;
313         realio.end = realio.start + SZ_64K - 1;
314         status = pci_remap_iospace(&realio, cf->phys_baseaddr + CF_IO_PHYS);
315         if (status)
316                 goto fail0a;
317
318         /* reserve chip-select regions */
319         if (!devm_request_mem_region(&pdev->dev, io->start, resource_size(io), "at91_cf")) {
320                 status = -ENXIO;
321                 goto fail0a;
322         }
323
324         dev_info(&pdev->dev, "irqs det #%d, io #%d\n",
325                 gpio_to_irq(board->det_pin), gpio_to_irq(board->irq_pin));
326
327         cf->socket.owner = THIS_MODULE;
328         cf->socket.dev.parent = &pdev->dev;
329         cf->socket.ops = &at91_cf_ops;
330         cf->socket.resource_ops = &pccard_static_ops;
331         cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
332                                 | SS_CAP_MEM_ALIGN;
333         cf->socket.map_size = SZ_2K;
334         cf->socket.io[0].res = io;
335
336         status = pcmcia_register_socket(&cf->socket);
337         if (status < 0)
338                 goto fail0a;
339
340         return 0;
341
342 fail0a:
343         device_init_wakeup(&pdev->dev, 0);
344         return status;
345 }
346
347 static int at91_cf_remove(struct platform_device *pdev)
348 {
349         struct at91_cf_socket   *cf = platform_get_drvdata(pdev);
350
351         pcmcia_unregister_socket(&cf->socket);
352         device_init_wakeup(&pdev->dev, 0);
353
354         return 0;
355 }
356
357 #ifdef  CONFIG_PM
358
359 static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
360 {
361         struct at91_cf_socket   *cf = platform_get_drvdata(pdev);
362         struct at91_cf_data     *board = cf->board;
363
364         if (device_may_wakeup(&pdev->dev)) {
365                 enable_irq_wake(gpio_to_irq(board->det_pin));
366                 if (gpio_is_valid(board->irq_pin))
367                         enable_irq_wake(gpio_to_irq(board->irq_pin));
368         }
369         return 0;
370 }
371
372 static int at91_cf_resume(struct platform_device *pdev)
373 {
374         struct at91_cf_socket   *cf = platform_get_drvdata(pdev);
375         struct at91_cf_data     *board = cf->board;
376
377         if (device_may_wakeup(&pdev->dev)) {
378                 disable_irq_wake(gpio_to_irq(board->det_pin));
379                 if (gpio_is_valid(board->irq_pin))
380                         disable_irq_wake(gpio_to_irq(board->irq_pin));
381         }
382
383         return 0;
384 }
385
386 #else
387 #define at91_cf_suspend         NULL
388 #define at91_cf_resume          NULL
389 #endif
390
391 static struct platform_driver at91_cf_driver = {
392         .driver = {
393                 .name           = "at91_cf",
394                 .of_match_table = at91_cf_dt_ids,
395         },
396         .probe          = at91_cf_probe,
397         .remove         = at91_cf_remove,
398         .suspend        = at91_cf_suspend,
399         .resume         = at91_cf_resume,
400 };
401
402 module_platform_driver(at91_cf_driver);
403
404 MODULE_DESCRIPTION("AT91 Compact Flash Driver");
405 MODULE_AUTHOR("David Brownell");
406 MODULE_LICENSE("GPL");
407 MODULE_ALIAS("platform:at91_cf");