drivers/pci/hotplug/cpqphp_pci.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Compaq Hot Plug Controller Driver
   4  *
   5  * Copyright (C) 1995,2001 Compaq Computer Corporation
   6  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
   7  * Copyright (C) 2001 IBM Corp.
   8  *
   9  * All rights reserved.
  10  *
  11  * Send feedback to <greg@kroah.com>
  12  *
  13  */
  14
  15 #include <linux/module.h>
  16 #include <linux/kernel.h>
  17 #include <linux/types.h>
  18 #include <linux/slab.h>
  19 #include <linux/workqueue.h>
  20 #include <linux/proc_fs.h>
  21 #include <linux/pci.h>
  22 #include <linux/pci_hotplug.h>
  23 #include "../pci.h"
  24 #include "cpqphp.h"
  25 #include "cpqphp_nvram.h"
  26
  27
  28 u8 cpqhp_nic_irq;
  29 u8 cpqhp_disk_irq;
  30
  31 static u16 unused_IRQ;
  32
  33 /*
  34  * detect_HRT_floating_pointer
  35  *
  36  * find the Hot Plug Resource Table in the specified region of memory.
  37  *
  38  */
  39 static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iomem *end)
  40 {
  41         void __iomem *fp;
  42         void __iomem *endp;
  43         u8 temp1, temp2, temp3, temp4;
  44         int status = 0;
  45
  46         endp = (end - sizeof(struct hrt) + 1);
  47
  48         for (fp = begin; fp <= endp; fp += 16) {
  49                 temp1 = readb(fp + SIG0);
  50                 temp2 = readb(fp + SIG1);
  51                 temp3 = readb(fp + SIG2);
  52                 temp4 = readb(fp + SIG3);
  53                 if (temp1 == '$' &&
  54                     temp2 == 'H' &&
  55                     temp3 == 'R' &&
  56                     temp4 == 'T') {
  57                         status = 1;
  58                         break;
  59                 }
  60         }
  61
  62         if (!status)
  63                 fp = NULL;
  64
  65         dbg("Discovered Hotplug Resource Table at %p\n", fp);
  66         return fp;
  67 }
  68
  69
  70 int cpqhp_configure_device(struct controller *ctrl, struct pci_func *func)
  71 {
  72         struct pci_bus *child;
  73         int num;
  74
  75         pci_lock_rescan_remove();
  76
  77         if (func->pci_dev == NULL)
  78                 func->pci_dev = pci_get_domain_bus_and_slot(0, func->bus,
  79                                                         PCI_DEVFN(func->device,
  80                                                         func->function));
  81
  82         /* No pci device, we need to create it then */
  83         if (func->pci_dev == NULL) {
  84                 dbg("INFO: pci_dev still null\n");
  85
  86                 num = pci_scan_slot(ctrl->pci_dev->bus, PCI_DEVFN(func->device, func->function));
  87                 if (num)
  88                         pci_bus_add_devices(ctrl->pci_dev->bus);
  89
  90                 func->pci_dev = pci_get_domain_bus_and_slot(0, func->bus,
  91                                                         PCI_DEVFN(func->device,
  92                                                         func->function));
  93                 if (func->pci_dev == NULL) {
  94                         dbg("ERROR: pci_dev still null\n");
  95                         goto out;
  96                 }
  97         }
  98
  99         if (func->pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 100                 pci_hp_add_bridge(func->pci_dev);
 101                 child = func->pci_dev->subordinate;
 102                 if (child)
 103                         pci_bus_add_devices(child);
 104         }
 105
 106         pci_dev_put(func->pci_dev);
 107
 108  out:
 109         pci_unlock_rescan_remove();
 110         return 0;
 111 }
 112
 113
 114 int cpqhp_unconfigure_device(struct pci_func *func)
 115 {
 116         int j;
 117
 118         dbg("%s: bus/dev/func = %x/%x/%x\n", __func__, func->bus, func->device, func->function);
 119
 120         pci_lock_rescan_remove();
 121         for (j = 0; j < 8 ; j++) {
 122                 struct pci_dev *temp = pci_get_domain_bus_and_slot(0,
 123                                                         func->bus,
 124                                                         PCI_DEVFN(func->device,
 125                                                         j));
 126                 if (temp) {
 127                         pci_dev_put(temp);
 128                         pci_stop_and_remove_bus_device(temp);
 129                 }
 130         }
 131         pci_unlock_rescan_remove();
 132         return 0;
 133 }
 134
 135 static int PCI_RefinedAccessConfig(struct pci_bus *bus, unsigned int devfn, u8 offset, u32 *value)
 136 {
 137         u32 vendID = 0;
 138
 139         if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &vendID) == -1)
 140                 return -1;
 141         if (vendID == 0xffffffff)
 142                 return -1;
 143         return pci_bus_read_config_dword(bus, devfn, offset, value);
 144 }
 145
 146
 147 /*
 148  * cpqhp_set_irq
 149  *
 150  * @bus_num: bus number of PCI device
 151  * @dev_num: device number of PCI device
 152  * @slot: pointer to u8 where slot number will be returned
 153  */
 154 int cpqhp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
 155 {
 156         int rc = 0;
 157
 158         if (cpqhp_legacy_mode) {
 159                 struct pci_dev *fakedev;
 160                 struct pci_bus *fakebus;
 161                 u16 temp_word;
 162
 163                 fakedev = kmalloc(sizeof(*fakedev), GFP_KERNEL);
 164                 fakebus = kmalloc(sizeof(*fakebus), GFP_KERNEL);
 165                 if (!fakedev || !fakebus) {
 166                         kfree(fakedev);
 167                         kfree(fakebus);
 168                         return -ENOMEM;
 169                 }
 170
 171                 fakedev->devfn = dev_num << 3;
 172                 fakedev->bus = fakebus;
 173                 fakebus->number = bus_num;
 174                 dbg("%s: dev %d, bus %d, pin %d, num %d\n",
 175                     __func__, dev_num, bus_num, int_pin, irq_num);
 176                 rc = pcibios_set_irq_routing(fakedev, int_pin - 1, irq_num);
 177                 kfree(fakedev);
 178                 kfree(fakebus);
 179                 dbg("%s: rc %d\n", __func__, rc);
 180                 if (!rc)
 181                         return !rc;
 182
 183                 /* set the Edge Level Control Register (ELCR) */
 184                 temp_word = inb(0x4d0);
 185                 temp_word |= inb(0x4d1) << 8;
 186
 187                 temp_word |= 0x01 << irq_num;
 188
 189                 /* This should only be for x86 as it sets the Edge Level
 190                  * Control Register
 191                  */
 192                 outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word &
 193                 0xFF00) >> 8), 0x4d1); rc = 0; }
 194
 195         return rc;
 196 }
 197
 198
 199 static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 *dev_num)
 200 {
 201         u16 tdevice;
 202         u32 work;
 203         u8 tbus;
 204
 205         ctrl->pci_bus->number = bus_num;
 206
 207         for (tdevice = 0; tdevice < 0xFF; tdevice++) {
 208                 /* Scan for access first */
 209                 if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
 210                         continue;
 211                 dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice);
 212                 /* Yep we got one. Not a bridge ? */
 213                 if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) {
 214                         *dev_num = tdevice;
 215                         dbg("found it !\n");
 216                         return 0;
 217                 }
 218         }
 219         for (tdevice = 0; tdevice < 0xFF; tdevice++) {
 220                 /* Scan for access first */
 221                 if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
 222                         continue;
 223                 dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice);
 224                 /* Yep we got one. bridge ? */
 225                 if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
 226                         pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus);
 227                         /* XXX: no recursion, wtf? */
 228                         dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice);
 229                         return 0;
 230                 }
 231         }
 232
 233         return -1;
 234 }
 235
 236
 237 static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot, u8 nobridge)
 238 {
 239         int loop, len;
 240         u32 work;
 241         u8 tbus, tdevice, tslot;
 242
 243         len = cpqhp_routing_table_length();
 244         for (loop = 0; loop < len; ++loop) {
 245                 tbus = cpqhp_routing_table->slots[loop].bus;
 246                 tdevice = cpqhp_routing_table->slots[loop].devfn;
 247                 tslot = cpqhp_routing_table->slots[loop].slot;
 248
 249                 if (tslot == slot) {
 250                         *bus_num = tbus;
 251                         *dev_num = tdevice;
 252                         ctrl->pci_bus->number = tbus;
 253                         pci_bus_read_config_dword(ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work);
 254                         if (!nobridge || (work == 0xffffffff))
 255                                 return 0;
 256
 257                         dbg("bus_num %d devfn %d\n", *bus_num, *dev_num);
 258                         pci_bus_read_config_dword(ctrl->pci_bus, *dev_num, PCI_CLASS_REVISION, &work);
 259                         dbg("work >> 8 (%x) = BRIDGE (%x)\n", work >> 8, PCI_TO_PCI_BRIDGE_CLASS);
 260
 261                         if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
 262                                 pci_bus_read_config_byte(ctrl->pci_bus, *dev_num, PCI_SECONDARY_BUS, &tbus);
 263                                 dbg("Scan bus for Non Bridge: bus %d\n", tbus);
 264                                 if (PCI_ScanBusForNonBridge(ctrl, tbus, dev_num) == 0) {
 265                                         *bus_num = tbus;
 266                                         return 0;
 267                                 }
 268                         } else
 269                                 return 0;
 270                 }
 271         }
 272         return -1;
 273 }
 274
 275
 276 int cpqhp_get_bus_dev(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot)
 277 {
 278         /* plain (bridges allowed) */
 279         return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0);
 280 }
 281
 282
 283 /* More PCI configuration routines; this time centered around hotplug
 284  * controller
 285  */
 286
 287
 288 /*
 289  * cpqhp_save_config
 290  *
 291  * Reads configuration for all slots in a PCI bus and saves info.
 292  *
 293  * Note:  For non-hot plug buses, the slot # saved is the device #
 294  *
 295  * returns 0 if success
 296  */
 297 int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 298 {
 299         long rc;
 300         u8 class_code;
 301         u8 header_type;
 302         u32 ID;
 303         u8 secondary_bus;
 304         struct pci_func *new_slot;
 305         int sub_bus;
 306         int FirstSupported;
 307         int LastSupported;
 308         int max_functions;
 309         int function;
 310         u8 DevError;
 311         int device = 0;
 312         int cloop = 0;
 313         int stop_it;
 314         int index;
 315         u16 devfn;
 316
 317         /* Decide which slots are supported */
 318
 319         if (is_hot_plug) {
 320                 /*
 321                  * is_hot_plug is the slot mask
 322                  */
 323                 FirstSupported = is_hot_plug >> 4;
 324                 LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1;
 325         } else {
 326                 FirstSupported = 0;
 327                 LastSupported = 0x1F;
 328         }
 329
 330         /* Save PCI configuration space for all devices in supported slots */
 331         ctrl->pci_bus->number = busnumber;
 332         for (device = FirstSupported; device <= LastSupported; device++) {
 333                 ID = 0xFFFFFFFF;
 334                 rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
 335
 336                 if (ID == 0xFFFFFFFF) {
 337                         if (is_hot_plug) {
 338                                 /* Setup slot structure with entry for empty
 339                                  * slot
 340                                  */
 341                                 new_slot = cpqhp_slot_create(busnumber);
 342                                 if (new_slot == NULL)
 343                                         return 1;
 344
 345                                 new_slot->bus = (u8) busnumber;
 346                                 new_slot->device = (u8) device;
 347                                 new_slot->function = 0;
 348                                 new_slot->is_a_board = 0;
 349                                 new_slot->presence_save = 0;
 350                                 new_slot->switch_save = 0;
 351                         }
 352                         continue;
 353                 }
 354
 355                 rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
 356                 if (rc)
 357                         return rc;
 358
 359                 rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
 360                 if (rc)
 361                         return rc;
 362
 363                 /* If multi-function device, set max_functions to 8 */
 364                 if (header_type & 0x80)
 365                         max_functions = 8;
 366                 else
 367                         max_functions = 1;
 368
 369                 function = 0;
 370
 371                 do {
 372                         DevError = 0;
 373                         if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 374                                 /* Recurse the subordinate bus
 375                                  * get the subordinate bus number
 376                                  */
 377                                 rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
 378                                 if (rc) {
 379                                         return rc;
 380                                 } else {
 381                                         sub_bus = (int) secondary_bus;
 382
 383                                         /* Save secondary bus cfg spc
 384                                          * with this recursive call.
 385                                          */
 386                                         rc = cpqhp_save_config(ctrl, sub_bus, 0);
 387                                         if (rc)
 388                                                 return rc;
 389                                         ctrl->pci_bus->number = busnumber;
 390                                 }
 391                         }
 392
 393                         index = 0;
 394                         new_slot = cpqhp_slot_find(busnumber, device, index++);
 395                         while (new_slot &&
 396                                (new_slot->function != (u8) function))
 397                                 new_slot = cpqhp_slot_find(busnumber, device, index++);
 398
 399                         if (!new_slot) {
 400                                 /* Setup slot structure. */
 401                                 new_slot = cpqhp_slot_create(busnumber);
 402                                 if (new_slot == NULL)
 403                                         return 1;
 404                         }
 405
 406                         new_slot->bus = (u8) busnumber;
 407                         new_slot->device = (u8) device;
 408                         new_slot->function = (u8) function;
 409                         new_slot->is_a_board = 1;
 410                         new_slot->switch_save = 0x10;
 411                         /* In case of unsupported board */
 412                         new_slot->status = DevError;
 413                         devfn = (new_slot->device << 3) | new_slot->function;
 414                         new_slot->pci_dev = pci_get_domain_bus_and_slot(0,
 415                                                         new_slot->bus, devfn);
 416
 417                         for (cloop = 0; cloop < 0x20; cloop++) {
 418                                 rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) &(new_slot->config_space[cloop]));
 419                                 if (rc)
 420                                         return rc;
 421                         }
 422
 423                         pci_dev_put(new_slot->pci_dev);
 424
 425                         function++;
 426
 427                         stop_it = 0;
 428
 429                         /* this loop skips to the next present function
 430                          * reading in Class Code and Header type.
 431                          */
 432                         while ((function < max_functions) && (!stop_it)) {
 433                                 rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
 434                                 if (ID == 0xFFFFFFFF) {
 435                                         function++;
 436                                         continue;
 437                                 }
 438                                 rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
 439                                 if (rc)
 440                                         return rc;
 441
 442                                 rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
 443                                 if (rc)
 444                                         return rc;
 445
 446                                 stop_it++;
 447                         }
 448
 449                 } while (function < max_functions);
 450         }                       /* End of FOR loop */
 451
 452         return 0;
 453 }
 454
 455
 456 /*
 457  * cpqhp_save_slot_config
 458  *
 459  * Saves configuration info for all PCI devices in a given slot
 460  * including subordinate buses.
 461  *
 462  * returns 0 if success
 463  */
 464 int cpqhp_save_slot_config(struct controller *ctrl, struct pci_func *new_slot)
 465 {
 466         long rc;
 467         u8 class_code;
 468         u8 header_type;
 469         u32 ID;
 470         u8 secondary_bus;
 471         int sub_bus;
 472         int max_functions;
 473         int function = 0;
 474         int cloop = 0;
 475         int stop_it;
 476
 477         ID = 0xFFFFFFFF;
 478
 479         ctrl->pci_bus->number = new_slot->bus;
 480         pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID);
 481
 482         if (ID == 0xFFFFFFFF)
 483                 return 2;
 484
 485         pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
 486         pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
 487
 488         if (header_type & 0x80) /* Multi-function device */
 489                 max_functions = 8;
 490         else
 491                 max_functions = 1;
 492
 493         while (function < max_functions) {
 494                 if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 495                         /*  Recurse the subordinate bus */
 496                         pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
 497
 498                         sub_bus = (int) secondary_bus;
 499
 500                         /* Save the config headers for the secondary
 501                          * bus.
 502                          */
 503                         rc = cpqhp_save_config(ctrl, sub_bus, 0);
 504                         if (rc)
 505                                 return(rc);
 506                         ctrl->pci_bus->number = new_slot->bus;
 507
 508                 }
 509
 510                 new_slot->status = 0;
 511
 512                 for (cloop = 0; cloop < 0x20; cloop++)
 513                         pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) &(new_slot->config_space[cloop]));
 514
 515                 function++;
 516
 517                 stop_it = 0;
 518
 519                 /* this loop skips to the next present function
 520                  * reading in the Class Code and the Header type.
 521                  */
 522                 while ((function < max_functions) && (!stop_it)) {
 523                         pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
 524
 525                         if (ID == 0xFFFFFFFF)
 526                                 function++;
 527                         else {
 528                                 pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
 529                                 pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
 530                                 stop_it++;
 531                         }
 532                 }
 533
 534         }
 535
 536         return 0;
 537 }
 538
 539
 540 /*
 541  * cpqhp_save_base_addr_length
 542  *
 543  * Saves the length of all base address registers for the
 544  * specified slot.  this is for hot plug REPLACE
 545  *
 546  * returns 0 if success
 547  */
 548 int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func *func)
 549 {
 550         u8 cloop;
 551         u8 header_type;
 552         u8 secondary_bus;
 553         u8 type;
 554         int sub_bus;
 555         u32 temp_register;
 556         u32 base;
 557         u32 rc;
 558         struct pci_func *next;
 559         int index = 0;
 560         struct pci_bus *pci_bus = ctrl->pci_bus;
 561         unsigned int devfn;
 562
 563         func = cpqhp_slot_find(func->bus, func->device, index++);
 564
 565         while (func != NULL) {
 566                 pci_bus->number = func->bus;
 567                 devfn = PCI_DEVFN(func->device, func->function);
 568
 569                 /* Check for Bridge */
 570                 pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 571
 572                 if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 573                         pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
 574
 575                         sub_bus = (int) secondary_bus;
 576
 577                         next = cpqhp_slot_list[sub_bus];
 578
 579                         while (next != NULL) {
 580                                 rc = cpqhp_save_base_addr_length(ctrl, next);
 581                                 if (rc)
 582                                         return rc;
 583
 584                                 next = next->next;
 585                         }
 586                         pci_bus->number = func->bus;
 587
 588                         /* FIXME: this loop is duplicated in the non-bridge
 589                          * case.  The two could be rolled together Figure out
 590                          * IO and memory base lengths
 591                          */
 592                         for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
 593                                 temp_register = 0xFFFFFFFF;
 594                                 pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
 595                                 pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
 596                                 /* If this register is implemented */
 597                                 if (base) {
 598                                         if (base & 0x01L) {
 599                                                 /* IO base
 600                                                  * set base = amount of IO space
 601                                                  * requested
 602                                                  */
 603                                                 base = base & 0xFFFFFFFE;
 604                                                 base = (~base) + 1;
 605
 606                                                 type = 1;
 607                                         } else {
 608                                                 /* memory base */
 609                                                 base = base & 0xFFFFFFF0;
 610                                                 base = (~base) + 1;
 611
 612                                                 type = 0;
 613                                         }
 614                                 } else {
 615                                         base = 0x0L;
 616                                         type = 0;
 617                                 }
 618
 619                                 /* Save information in slot structure */
 620                                 func->base_length[(cloop - 0x10) >> 2] =
 621                                 base;
 622                                 func->base_type[(cloop - 0x10) >> 2] = type;
 623
 624                         }       /* End of base register loop */
 625
 626                 } else if ((header_type & 0x7F) == 0x00) {
 627                         /* Figure out IO and memory base lengths */
 628                         for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 629                                 temp_register = 0xFFFFFFFF;
 630                                 pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
 631                                 pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
 632
 633                                 /* If this register is implemented */
 634                                 if (base) {
 635                                         if (base & 0x01L) {
 636                                                 /* IO base
 637                                                  * base = amount of IO space
 638                                                  * requested
 639                                                  */
 640                                                 base = base & 0xFFFFFFFE;
 641                                                 base = (~base) + 1;
 642
 643                                                 type = 1;
 644                                         } else {
 645                                                 /* memory base
 646                                                  * base = amount of memory
 647                                                  * space requested
 648                                                  */
 649                                                 base = base & 0xFFFFFFF0;
 650                                                 base = (~base) + 1;
 651
 652                                                 type = 0;
 653                                         }
 654                                 } else {
 655                                         base = 0x0L;
 656                                         type = 0;
 657                                 }
 658
 659                                 /* Save information in slot structure */
 660                                 func->base_length[(cloop - 0x10) >> 2] = base;
 661                                 func->base_type[(cloop - 0x10) >> 2] = type;
 662
 663                         }       /* End of base register loop */
 664
 665                 } else {          /* Some other unknown header type */
 666                 }
 667
 668                 /* find the next device in this slot */
 669                 func = cpqhp_slot_find(func->bus, func->device, index++);
 670         }
 671
 672         return(0);
 673 }
 674
 675
 676 /*
 677  * cpqhp_save_used_resources
 678  *
 679  * Stores used resource information for existing boards.  this is
 680  * for boards that were in the system when this driver was loaded.
 681  * this function is for hot plug ADD
 682  *
 683  * returns 0 if success
 684  */
 685 int cpqhp_save_used_resources(struct controller *ctrl, struct pci_func *func)
 686 {
 687         u8 cloop;
 688         u8 header_type;
 689         u8 secondary_bus;
 690         u8 temp_byte;
 691         u8 b_base;
 692         u8 b_length;
 693         u16 command;
 694         u16 save_command;
 695         u16 w_base;
 696         u16 w_length;
 697         u32 temp_register;
 698         u32 save_base;
 699         u32 base;
 700         int index = 0;
 701         struct pci_resource *mem_node;
 702         struct pci_resource *p_mem_node;
 703         struct pci_resource *io_node;
 704         struct pci_resource *bus_node;
 705         struct pci_bus *pci_bus = ctrl->pci_bus;
 706         unsigned int devfn;
 707
 708         func = cpqhp_slot_find(func->bus, func->device, index++);
 709
 710         while ((func != NULL) && func->is_a_board) {
 711                 pci_bus->number = func->bus;
 712                 devfn = PCI_DEVFN(func->device, func->function);
 713
 714                 /* Save the command register */
 715                 pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
 716
 717                 /* disable card */
 718                 command = 0x00;
 719                 pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
 720
 721                 /* Check for Bridge */
 722                 pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 723
 724                 if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 725                         /* Clear Bridge Control Register */
 726                         command = 0x00;
 727                         pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
 728                         pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
 729                         pci_bus_read_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, &temp_byte);
 730
 731                         bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
 732                         if (!bus_node)
 733                                 return -ENOMEM;
 734
 735                         bus_node->base = secondary_bus;
 736                         bus_node->length = temp_byte - secondary_bus + 1;
 737
 738                         bus_node->next = func->bus_head;
 739                         func->bus_head = bus_node;
 740
 741                         /* Save IO base and Limit registers */
 742                         pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base);
 743                         pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length);
 744
 745                         if ((b_base <= b_length) && (save_command & 0x01)) {
 746                                 io_node = kmalloc(sizeof(*io_node), GFP_KERNEL);
 747                                 if (!io_node)
 748                                         return -ENOMEM;
 749
 750                                 io_node->base = (b_base & 0xF0) << 8;
 751                                 io_node->length = (b_length - b_base + 0x10) << 8;
 752
 753                                 io_node->next = func->io_head;
 754                                 func->io_head = io_node;
 755                         }
 756
 757                         /* Save memory base and Limit registers */
 758                         pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
 759                         pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
 760
 761                         if ((w_base <= w_length) && (save_command & 0x02)) {
 762                                 mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
 763                                 if (!mem_node)
 764                                         return -ENOMEM;
 765
 766                                 mem_node->base = w_base << 16;
 767                                 mem_node->length = (w_length - w_base + 0x10) << 16;
 768
 769                                 mem_node->next = func->mem_head;
 770                                 func->mem_head = mem_node;
 771                         }
 772
 773                         /* Save prefetchable memory base and Limit registers */
 774                         pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
 775                         pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
 776
 777                         if ((w_base <= w_length) && (save_command & 0x02)) {
 778                                 p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
 779                                 if (!p_mem_node)
 780                                         return -ENOMEM;
 781
 782                                 p_mem_node->base = w_base << 16;
 783                                 p_mem_node->length = (w_length - w_base + 0x10) << 16;
 784
 785                                 p_mem_node->next = func->p_mem_head;
 786                                 func->p_mem_head = p_mem_node;
 787                         }
 788                         /* Figure out IO and memory base lengths */
 789                         for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
 790                                 pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
 791
 792                                 temp_register = 0xFFFFFFFF;
 793                                 pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
 794                                 pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
 795
 796                                 temp_register = base;
 797
 798                                 /* If this register is implemented */
 799                                 if (base) {
 800                                         if (((base & 0x03L) == 0x01)
 801                                             && (save_command & 0x01)) {
 802                                                 /* IO base
 803                                                  * set temp_register = amount
 804                                                  * of IO space requested
 805                                                  */
 806                                                 temp_register = base & 0xFFFFFFFE;
 807                                                 temp_register = (~temp_register) + 1;
 808
 809                                                 io_node = kmalloc(sizeof(*io_node),
 810                                                                 GFP_KERNEL);
 811                                                 if (!io_node)
 812                                                         return -ENOMEM;
 813
 814                                                 io_node->base =
 815                                                 save_base & (~0x03L);
 816                                                 io_node->length = temp_register;
 817
 818                                                 io_node->next = func->io_head;
 819                                                 func->io_head = io_node;
 820                                         } else
 821                                                 if (((base & 0x0BL) == 0x08)
 822                                                     && (save_command & 0x02)) {
 823                                                 /* prefetchable memory base */
 824                                                 temp_register = base & 0xFFFFFFF0;
 825                                                 temp_register = (~temp_register) + 1;
 826
 827                                                 p_mem_node = kmalloc(sizeof(*p_mem_node),
 828                                                                 GFP_KERNEL);
 829                                                 if (!p_mem_node)
 830                                                         return -ENOMEM;
 831
 832                                                 p_mem_node->base = save_base & (~0x0FL);
 833                                                 p_mem_node->length = temp_register;
 834
 835                                                 p_mem_node->next = func->p_mem_head;
 836                                                 func->p_mem_head = p_mem_node;
 837                                         } else
 838                                                 if (((base & 0x0BL) == 0x00)
 839                                                     && (save_command & 0x02)) {
 840                                                 /* prefetchable memory base */
 841                                                 temp_register = base & 0xFFFFFFF0;
 842                                                 temp_register = (~temp_register) + 1;
 843
 844                                                 mem_node = kmalloc(sizeof(*mem_node),
 845                                                                 GFP_KERNEL);
 846                                                 if (!mem_node)
 847                                                         return -ENOMEM;
 848
 849                                                 mem_node->base = save_base & (~0x0FL);
 850                                                 mem_node->length = temp_register;
 851
 852                                                 mem_node->next = func->mem_head;
 853                                                 func->mem_head = mem_node;
 854                                         } else
 855                                                 return(1);
 856                                 }
 857                         }       /* End of base register loop */
 858                 /* Standard header */
 859                 } else if ((header_type & 0x7F) == 0x00) {
 860                         /* Figure out IO and memory base lengths */
 861                         for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
 862                                 pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
 863
 864                                 temp_register = 0xFFFFFFFF;
 865                                 pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
 866                                 pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
 867
 868                                 temp_register = base;
 869
 870                                 /* If this register is implemented */
 871                                 if (base) {
 872                                         if (((base & 0x03L) == 0x01)
 873                                             && (save_command & 0x01)) {
 874                                                 /* IO base
 875                                                  * set temp_register = amount
 876                                                  * of IO space requested
 877                                                  */
 878                                                 temp_register = base & 0xFFFFFFFE;
 879                                                 temp_register = (~temp_register) + 1;
 880
 881                                                 io_node = kmalloc(sizeof(*io_node),
 882                                                                 GFP_KERNEL);
 883                                                 if (!io_node)
 884                                                         return -ENOMEM;
 885
 886                                                 io_node->base = save_base & (~0x01L);
 887                                                 io_node->length = temp_register;
 888
 889                                                 io_node->next = func->io_head;
 890                                                 func->io_head = io_node;
 891                                         } else
 892                                                 if (((base & 0x0BL) == 0x08)
 893                                                     && (save_command & 0x02)) {
 894                                                 /* prefetchable memory base */
 895                                                 temp_register = base & 0xFFFFFFF0;
 896                                                 temp_register = (~temp_register) + 1;
 897
 898                                                 p_mem_node = kmalloc(sizeof(*p_mem_node),
 899                                                                 GFP_KERNEL);
 900                                                 if (!p_mem_node)
 901                                                         return -ENOMEM;
 902
 903                                                 p_mem_node->base = save_base & (~0x0FL);
 904                                                 p_mem_node->length = temp_register;
 905
 906                                                 p_mem_node->next = func->p_mem_head;
 907                                                 func->p_mem_head = p_mem_node;
 908                                         } else
 909                                                 if (((base & 0x0BL) == 0x00)
 910                                                     && (save_command & 0x02)) {
 911                                                 /* prefetchable memory base */
 912                                                 temp_register = base & 0xFFFFFFF0;
 913                                                 temp_register = (~temp_register) + 1;
 914
 915                                                 mem_node = kmalloc(sizeof(*mem_node),
 916                                                                 GFP_KERNEL);
 917                                                 if (!mem_node)
 918                                                         return -ENOMEM;
 919
 920                                                 mem_node->base = save_base & (~0x0FL);
 921                                                 mem_node->length = temp_register;
 922
 923                                                 mem_node->next = func->mem_head;
 924                                                 func->mem_head = mem_node;
 925                                         } else
 926                                                 return(1);
 927                                 }
 928                         }       /* End of base register loop */
 929                 }
 930
 931                 /* find the next device in this slot */
 932                 func = cpqhp_slot_find(func->bus, func->device, index++);
 933         }
 934
 935         return 0;
 936 }
 937
 938
 939 /*
 940  * cpqhp_configure_board
 941  *
 942  * Copies saved configuration information to one slot.
 943  * this is called recursively for bridge devices.
 944  * this is for hot plug REPLACE!
 945  *
 946  * returns 0 if success
 947  */
 948 int cpqhp_configure_board(struct controller *ctrl, struct pci_func *func)
 949 {
 950         int cloop;
 951         u8 header_type;
 952         u8 secondary_bus;
 953         int sub_bus;
 954         struct pci_func *next;
 955         u32 temp;
 956         u32 rc;
 957         int index = 0;
 958         struct pci_bus *pci_bus = ctrl->pci_bus;
 959         unsigned int devfn;
 960
 961         func = cpqhp_slot_find(func->bus, func->device, index++);
 962
 963         while (func != NULL) {
 964                 pci_bus->number = func->bus;
 965                 devfn = PCI_DEVFN(func->device, func->function);
 966
 967                 /* Start at the top of config space so that the control
 968                  * registers are programmed last
 969                  */
 970                 for (cloop = 0x3C; cloop > 0; cloop -= 4)
 971                         pci_bus_write_config_dword(pci_bus, devfn, cloop, func->config_space[cloop >> 2]);
 972
 973                 pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
 974
 975                 /* If this is a bridge device, restore subordinate devices */
 976                 if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
 977                         pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
 978
 979                         sub_bus = (int) secondary_bus;
 980
 981                         next = cpqhp_slot_list[sub_bus];
 982
 983                         while (next != NULL) {
 984                                 rc = cpqhp_configure_board(ctrl, next);
 985                                 if (rc)
 986                                         return rc;
 987
 988                                 next = next->next;
 989                         }
 990                 } else {
 991
 992                         /* Check all the base Address Registers to make sure
 993                          * they are the same.  If not, the board is different.
 994                          */
 995
 996                         for (cloop = 16; cloop < 40; cloop += 4) {
 997                                 pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp);
 998
 999                                 if (temp != func->config_space[cloop >> 2]) {
1000                                         dbg("Config space compare failure!!! offset = %x\n", cloop);
1001                                         dbg("bus = %x, device = %x, function = %x\n", func->bus, func->device, func->function);
1002                                         dbg("temp = %x, config space = %x\n\n", temp, func->config_space[cloop >> 2]);
1003                                         return 1;
1004                                 }
1005                         }
1006                 }
1007
1008                 func->configured = 1;
1009
1010                 func = cpqhp_slot_find(func->bus, func->device, index++);
1011         }
1012
1013         return 0;
1014 }
1015
1016
1017 /*
1018  * cpqhp_valid_replace
1019  *
1020  * this function checks to see if a board is the same as the
1021  * one it is replacing.  this check will detect if the device's
1022  * vendor or device id's are the same
1023  *
1024  * returns 0 if the board is the same nonzero otherwise
1025  */
1026 int cpqhp_valid_replace(struct controller *ctrl, struct pci_func *func)
1027 {
1028         u8 cloop;
1029         u8 header_type;
1030         u8 secondary_bus;
1031         u8 type;
1032         u32 temp_register = 0;
1033         u32 base;
1034         u32 rc;
1035         struct pci_func *next;
1036         int index = 0;
1037         struct pci_bus *pci_bus = ctrl->pci_bus;
1038         unsigned int devfn;
1039
1040         if (!func->is_a_board)
1041                 return(ADD_NOT_SUPPORTED);
1042
1043         func = cpqhp_slot_find(func->bus, func->device, index++);
1044
1045         while (func != NULL) {
1046                 pci_bus->number = func->bus;
1047                 devfn = PCI_DEVFN(func->device, func->function);
1048
1049                 pci_bus_read_config_dword(pci_bus, devfn, PCI_VENDOR_ID, &temp_register);
1050
1051                 /* No adapter present */
1052                 if (temp_register == 0xFFFFFFFF)
1053                         return(NO_ADAPTER_PRESENT);
1054
1055                 if (temp_register != func->config_space[0])
1056                         return(ADAPTER_NOT_SAME);
1057
1058                 /* Check for same revision number and class code */
1059                 pci_bus_read_config_dword(pci_bus, devfn, PCI_CLASS_REVISION, &temp_register);
1060
1061                 /* Adapter not the same */
1062                 if (temp_register != func->config_space[0x08 >> 2])
1063                         return(ADAPTER_NOT_SAME);
1064
1065                 /* Check for Bridge */
1066                 pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
1067
1068                 if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
1069                         /* In order to continue checking, we must program the
1070                          * bus registers in the bridge to respond to accesses
1071                          * for its subordinate bus(es)
1072                          */
1073
1074                         temp_register = func->config_space[0x18 >> 2];
1075                         pci_bus_write_config_dword(pci_bus, devfn, PCI_PRIMARY_BUS, temp_register);
1076
1077                         secondary_bus = (temp_register >> 8) & 0xFF;
1078
1079                         next = cpqhp_slot_list[secondary_bus];
1080
1081                         while (next != NULL) {
1082                                 rc = cpqhp_valid_replace(ctrl, next);
1083                                 if (rc)
1084                                         return rc;
1085
1086                                 next = next->next;
1087                         }
1088
1089                 }
1090                 /* Check to see if it is a standard config header */
1091                 else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
1092                         /* Check subsystem vendor and ID */
1093                         pci_bus_read_config_dword(pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register);
1094
1095                         if (temp_register != func->config_space[0x2C >> 2]) {
1096                                 /* If it's a SMART-2 and the register isn't
1097                                  * filled in, ignore the difference because
1098                                  * they just have an old rev of the firmware
1099                                  */
1100                                 if (!((func->config_space[0] == 0xAE100E11)
1101                                       && (temp_register == 0x00L)))
1102                                         return(ADAPTER_NOT_SAME);
1103                         }
1104                         /* Figure out IO and memory base lengths */
1105                         for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
1106                                 temp_register = 0xFFFFFFFF;
1107                                 pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
1108                                 pci_bus_read_config_dword(pci_bus, devfn, cloop, &base);
1109
1110                                 /* If this register is implemented */
1111                                 if (base) {
1112                                         if (base & 0x01L) {
1113                                                 /* IO base
1114                                                  * set base = amount of IO
1115                                                  * space requested
1116                                                  */
1117                                                 base = base & 0xFFFFFFFE;
1118                                                 base = (~base) + 1;
1119
1120                                                 type = 1;
1121                                         } else {
1122                                                 /* memory base */
1123                                                 base = base & 0xFFFFFFF0;
1124                                                 base = (~base) + 1;
1125
1126                                                 type = 0;
1127                                         }
1128                                 } else {
1129                                         base = 0x0L;
1130                                         type = 0;
1131                                 }
1132
1133                                 /* Check information in slot structure */
1134                                 if (func->base_length[(cloop - 0x10) >> 2] != base)
1135                                         return(ADAPTER_NOT_SAME);
1136
1137                                 if (func->base_type[(cloop - 0x10) >> 2] != type)
1138                                         return(ADAPTER_NOT_SAME);
1139
1140                         }       /* End of base register loop */
1141
1142                 }               /* End of (type 0 config space) else */
1143                 else {
1144                         /* this is not a type 0 or 1 config space header so
1145                          * we don't know how to do it
1146                          */
1147                         return(DEVICE_TYPE_NOT_SUPPORTED);
1148                 }
1149
1150                 /* Get the next function */
1151                 func = cpqhp_slot_find(func->bus, func->device, index++);
1152         }
1153
1154
1155         return 0;
1156 }
1157
1158
1159 /*
1160  * cpqhp_find_available_resources
1161  *
1162  * Finds available memory, IO, and IRQ resources for programming
1163  * devices which may be added to the system
1164  * this function is for hot plug ADD!
1165  *
1166  * returns 0 if success
1167  */
1168 int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start)
1169 {
1170         u8 temp;
1171         u8 populated_slot;
1172         u8 bridged_slot;
1173         void __iomem *one_slot;
1174         void __iomem *rom_resource_table;
1175         struct pci_func *func = NULL;
1176         int i = 10, index;
1177         u32 temp_dword, rc;
1178         struct pci_resource *mem_node;
1179         struct pci_resource *p_mem_node;
1180         struct pci_resource *io_node;
1181         struct pci_resource *bus_node;
1182
1183         rom_resource_table = detect_HRT_floating_pointer(rom_start, rom_start+0xffff);
1184         dbg("rom_resource_table = %p\n", rom_resource_table);
1185
1186         if (rom_resource_table == NULL)
1187                 return -ENODEV;
1188
1189         /* Sum all resources and setup resource maps */
1190         unused_IRQ = readl(rom_resource_table + UNUSED_IRQ);
1191         dbg("unused_IRQ = %x\n", unused_IRQ);
1192
1193         temp = 0;
1194         while (unused_IRQ) {
1195                 if (unused_IRQ & 1) {
1196                         cpqhp_disk_irq = temp;
1197                         break;
1198                 }
1199                 unused_IRQ = unused_IRQ >> 1;
1200                 temp++;
1201         }
1202
1203         dbg("cpqhp_disk_irq= %d\n", cpqhp_disk_irq);
1204         unused_IRQ = unused_IRQ >> 1;
1205         temp++;
1206
1207         while (unused_IRQ) {
1208                 if (unused_IRQ & 1) {
1209                         cpqhp_nic_irq = temp;
1210                         break;
1211                 }
1212                 unused_IRQ = unused_IRQ >> 1;
1213                 temp++;
1214         }
1215
1216         dbg("cpqhp_nic_irq= %d\n", cpqhp_nic_irq);
1217         unused_IRQ = readl(rom_resource_table + PCIIRQ);
1218
1219         temp = 0;
1220
1221         if (!cpqhp_nic_irq)
1222                 cpqhp_nic_irq = ctrl->cfgspc_irq;
1223
1224         if (!cpqhp_disk_irq)
1225                 cpqhp_disk_irq = ctrl->cfgspc_irq;
1226
1227         dbg("cpqhp_disk_irq, cpqhp_nic_irq= %d, %d\n", cpqhp_disk_irq, cpqhp_nic_irq);
1228
1229         rc = compaq_nvram_load(rom_start, ctrl);
1230         if (rc)
1231                 return rc;
1232
1233         one_slot = rom_resource_table + sizeof(struct hrt);
1234
1235         i = readb(rom_resource_table + NUMBER_OF_ENTRIES);
1236         dbg("number_of_entries = %d\n", i);
1237
1238         if (!readb(one_slot + SECONDARY_BUS))
1239                 return 1;
1240
1241         dbg("dev|IO base|length|Mem base|length|Pre base|length|PB SB MB\n");
1242
1243         while (i && readb(one_slot + SECONDARY_BUS)) {
1244                 u8 dev_func = readb(one_slot + DEV_FUNC);
1245                 u8 primary_bus = readb(one_slot + PRIMARY_BUS);
1246                 u8 secondary_bus = readb(one_slot + SECONDARY_BUS);
1247                 u8 max_bus = readb(one_slot + MAX_BUS);
1248                 u16 io_base = readw(one_slot + IO_BASE);
1249                 u16 io_length = readw(one_slot + IO_LENGTH);
1250                 u16 mem_base = readw(one_slot + MEM_BASE);
1251                 u16 mem_length = readw(one_slot + MEM_LENGTH);
1252                 u16 pre_mem_base = readw(one_slot + PRE_MEM_BASE);
1253                 u16 pre_mem_length = readw(one_slot + PRE_MEM_LENGTH);
1254
1255                 dbg("%2.2x | %4.4x  | %4.4x | %4.4x   | %4.4x | %4.4x   | %4.4x |%2.2x %2.2x %2.2x\n",
1256                     dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length,
1257                     primary_bus, secondary_bus, max_bus);
1258
1259                 /* If this entry isn't for our controller's bus, ignore it */
1260                 if (primary_bus != ctrl->bus) {
1261                         i--;
1262                         one_slot += sizeof(struct slot_rt);
1263                         continue;
1264                 }
1265                 /* find out if this entry is for an occupied slot */
1266                 ctrl->pci_bus->number = primary_bus;
1267                 pci_bus_read_config_dword(ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword);
1268                 dbg("temp_D_word = %x\n", temp_dword);
1269
1270                 if (temp_dword != 0xFFFFFFFF) {
1271                         index = 0;
1272                         func = cpqhp_slot_find(primary_bus, dev_func >> 3, 0);
1273
1274                         while (func && (func->function != (dev_func & 0x07))) {
1275                                 dbg("func = %p (bus, dev, fun) = (%d, %d, %d)\n", func, primary_bus, dev_func >> 3, index);
1276                                 func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++);
1277                         }
1278
1279                         /* If we can't find a match, skip this table entry */
1280                         if (!func) {
1281                                 i--;
1282                                 one_slot += sizeof(struct slot_rt);
1283                                 continue;
1284                         }
1285                         /* this may not work and shouldn't be used */
1286                         if (secondary_bus != primary_bus)
1287                                 bridged_slot = 1;
1288                         else
1289                                 bridged_slot = 0;
1290
1291                         populated_slot = 1;
1292                 } else {
1293                         populated_slot = 0;
1294                         bridged_slot = 0;
1295                 }
1296
1297
1298                 /* If we've got a valid IO base, use it */
1299
1300                 temp_dword = io_base + io_length;
1301
1302                 if ((io_base) && (temp_dword < 0x10000)) {
1303                         io_node = kmalloc(sizeof(*io_node), GFP_KERNEL);
1304                         if (!io_node)
1305                                 return -ENOMEM;
1306
1307                         io_node->base = io_base;
1308                         io_node->length = io_length;
1309
1310                         dbg("found io_node(base, length) = %x, %x\n",
1311                                         io_node->base, io_node->length);
1312                         dbg("populated slot =%d \n", populated_slot);
1313                         if (!populated_slot) {
1314                                 io_node->next = ctrl->io_head;
1315                                 ctrl->io_head = io_node;
1316                         } else {
1317                                 io_node->next = func->io_head;
1318                                 func->io_head = io_node;
1319                         }
1320                 }
1321
1322                 /* If we've got a valid memory base, use it */
1323                 temp_dword = mem_base + mem_length;
1324                 if ((mem_base) && (temp_dword < 0x10000)) {
1325                         mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
1326                         if (!mem_node)
1327                                 return -ENOMEM;
1328
1329                         mem_node->base = mem_base << 16;
1330
1331                         mem_node->length = mem_length << 16;
1332
1333                         dbg("found mem_node(base, length) = %x, %x\n",
1334                                         mem_node->base, mem_node->length);
1335                         dbg("populated slot =%d \n", populated_slot);
1336                         if (!populated_slot) {
1337                                 mem_node->next = ctrl->mem_head;
1338                                 ctrl->mem_head = mem_node;
1339                         } else {
1340                                 mem_node->next = func->mem_head;
1341                                 func->mem_head = mem_node;
1342                         }
1343                 }
1344
1345                 /* If we've got a valid prefetchable memory base, and
1346                  * the base + length isn't greater than 0xFFFF
1347                  */
1348                 temp_dword = pre_mem_base + pre_mem_length;
1349                 if ((pre_mem_base) && (temp_dword < 0x10000)) {
1350                         p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
1351                         if (!p_mem_node)
1352                                 return -ENOMEM;
1353
1354                         p_mem_node->base = pre_mem_base << 16;
1355
1356                         p_mem_node->length = pre_mem_length << 16;
1357                         dbg("found p_mem_node(base, length) = %x, %x\n",
1358                                         p_mem_node->base, p_mem_node->length);
1359                         dbg("populated slot =%d \n", populated_slot);
1360
1361                         if (!populated_slot) {
1362                                 p_mem_node->next = ctrl->p_mem_head;
1363                                 ctrl->p_mem_head = p_mem_node;
1364                         } else {
1365                                 p_mem_node->next = func->p_mem_head;
1366                                 func->p_mem_head = p_mem_node;
1367                         }
1368                 }
1369
1370                 /* If we've got a valid bus number, use it
1371                  * The second condition is to ignore bus numbers on
1372                  * populated slots that don't have PCI-PCI bridges
1373                  */
1374                 if (secondary_bus && (secondary_bus != primary_bus)) {
1375                         bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
1376                         if (!bus_node)
1377                                 return -ENOMEM;
1378
1379                         bus_node->base = secondary_bus;
1380                         bus_node->length = max_bus - secondary_bus + 1;
1381                         dbg("found bus_node(base, length) = %x, %x\n",
1382                                         bus_node->base, bus_node->length);
1383                         dbg("populated slot =%d \n", populated_slot);
1384                         if (!populated_slot) {
1385                                 bus_node->next = ctrl->bus_head;
1386                                 ctrl->bus_head = bus_node;
1387                         } else {
1388                                 bus_node->next = func->bus_head;
1389                                 func->bus_head = bus_node;
1390                         }
1391                 }
1392
1393                 i--;
1394                 one_slot += sizeof(struct slot_rt);
1395         }
1396
1397         /* If all of the following fail, we don't have any resources for
1398          * hot plug add
1399          */
1400         rc = 1;
1401         rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
1402         rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
1403         rc &= cpqhp_resource_sort_and_combine(&(ctrl->io_head));
1404         rc &= cpqhp_resource_sort_and_combine(&(ctrl->bus_head));
1405
1406         return rc;
1407 }
1408
1409
1410 /*
1411  * cpqhp_return_board_resources
1412  *
1413  * this routine returns all resources allocated to a board to
1414  * the available pool.
1415  *
1416  * returns 0 if success
1417  */
1418 int cpqhp_return_board_resources(struct pci_func *func, struct resource_lists *resources)
1419 {
1420         int rc = 0;
1421         struct pci_resource *node;
1422         struct pci_resource *t_node;
1423         dbg("%s\n", __func__);
1424
1425         if (!func)
1426                 return 1;
1427
1428         node = func->io_head;
1429         func->io_head = NULL;
1430         while (node) {
1431                 t_node = node->next;
1432                 return_resource(&(resources->io_head), node);
1433                 node = t_node;
1434         }
1435
1436         node = func->mem_head;
1437         func->mem_head = NULL;
1438         while (node) {
1439                 t_node = node->next;
1440                 return_resource(&(resources->mem_head), node);
1441                 node = t_node;
1442         }
1443
1444         node = func->p_mem_head;
1445         func->p_mem_head = NULL;
1446         while (node) {
1447                 t_node = node->next;
1448                 return_resource(&(resources->p_mem_head), node);
1449                 node = t_node;
1450         }
1451
1452         node = func->bus_head;
1453         func->bus_head = NULL;
1454         while (node) {
1455                 t_node = node->next;
1456                 return_resource(&(resources->bus_head), node);
1457                 node = t_node;
1458         }
1459
1460         rc |= cpqhp_resource_sort_and_combine(&(resources->mem_head));
1461         rc |= cpqhp_resource_sort_and_combine(&(resources->p_mem_head));
1462         rc |= cpqhp_resource_sort_and_combine(&(resources->io_head));
1463         rc |= cpqhp_resource_sort_and_combine(&(resources->bus_head));
1464
1465         return rc;
1466 }
1467
1468
1469 /*
1470  * cpqhp_destroy_resource_list
1471  *
1472  * Puts node back in the resource list pointed to by head
1473  */
1474 void cpqhp_destroy_resource_list(struct resource_lists *resources)
1475 {
1476         struct pci_resource *res, *tres;
1477
1478         res = resources->io_head;
1479         resources->io_head = NULL;
1480
1481         while (res) {
1482                 tres = res;
1483                 res = res->next;
1484                 kfree(tres);
1485         }
1486
1487         res = resources->mem_head;
1488         resources->mem_head = NULL;
1489
1490         while (res) {
1491                 tres = res;
1492                 res = res->next;
1493                 kfree(tres);
1494         }
1495
1496         res = resources->p_mem_head;
1497         resources->p_mem_head = NULL;
1498
1499         while (res) {
1500                 tres = res;
1501                 res = res->next;
1502                 kfree(tres);
1503         }
1504
1505         res = resources->bus_head;
1506         resources->bus_head = NULL;
1507
1508         while (res) {
1509                 tres = res;
1510                 res = res->next;
1511                 kfree(tres);
1512         }
1513 }
1514
1515
1516 /*
1517  * cpqhp_destroy_board_resources
1518  *
1519  * Puts node back in the resource list pointed to by head
1520  */
1521 void cpqhp_destroy_board_resources(struct pci_func *func)
1522 {
1523         struct pci_resource *res, *tres;
1524
1525         res = func->io_head;
1526         func->io_head = NULL;
1527
1528         while (res) {
1529                 tres = res;
1530                 res = res->next;
1531                 kfree(tres);
1532         }
1533
1534         res = func->mem_head;
1535         func->mem_head = NULL;
1536
1537         while (res) {
1538                 tres = res;
1539                 res = res->next;
1540                 kfree(tres);
1541         }
1542
1543         res = func->p_mem_head;
1544         func->p_mem_head = NULL;
1545
1546         while (res) {
1547                 tres = res;
1548                 res = res->next;
1549                 kfree(tres);
1550         }
1551
1552         res = func->bus_head;
1553         func->bus_head = NULL;
1554
1555         while (res) {
1556                 tres = res;
1557                 res = res->next;
1558                 kfree(tres);
1559         }
1560 }