1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * JZ4780 EFUSE Memory Support driver
5 * Copyright (c) 2017 PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
6 * Copyright (c) 2020 H. Nikolaus Schaller <hns@goldelico.com>
10 * Currently supports JZ4780 efuse which has 8K programmable bit.
11 * Efuse is separated into seven segments as below:
13 * -----------------------------------------------------------------------
14 * | 64 bit | 128 bit | 128 bit | 3520 bit | 8 bit | 2296 bit | 2048 bit |
15 * -----------------------------------------------------------------------
17 * The rom itself is accessed using a 9 bit address line and an 8 word wide bus
18 * which reads/writes based on strobes. The strobe is configured in the config
19 * register and is based on number of cycles of the bus clock.
21 * Driver supports read only as the writes are done in the Factory.
24 #include <linux/bitops.h>
25 #include <linux/clk.h>
26 #include <linux/module.h>
27 #include <linux/nvmem-provider.h>
29 #include <linux/platform_device.h>
30 #include <linux/regmap.h>
31 #include <linux/timer.h>
33 #define JZ_EFUCTRL (0x0) /* Control Register */
34 #define JZ_EFUCFG (0x4) /* Configure Register*/
35 #define JZ_EFUSTATE (0x8) /* Status Register */
36 #define JZ_EFUDATA(n) (0xC + (n) * 4)
38 /* We read 32 byte chunks to avoid complexity in the driver. */
39 #define JZ_EFU_READ_SIZE 32
41 #define EFUCTRL_ADDR_MASK 0x3FF
42 #define EFUCTRL_ADDR_SHIFT 21
43 #define EFUCTRL_LEN_MASK 0x1F
44 #define EFUCTRL_LEN_SHIFT 16
45 #define EFUCTRL_PG_EN BIT(15)
46 #define EFUCTRL_WR_EN BIT(1)
47 #define EFUCTRL_RD_EN BIT(0)
49 #define EFUCFG_INT_EN BIT(31)
50 #define EFUCFG_RD_ADJ_MASK 0xF
51 #define EFUCFG_RD_ADJ_SHIFT 20
52 #define EFUCFG_RD_STR_MASK 0xF
53 #define EFUCFG_RD_STR_SHIFT 16
54 #define EFUCFG_WR_ADJ_MASK 0xF
55 #define EFUCFG_WR_ADJ_SHIFT 12
56 #define EFUCFG_WR_STR_MASK 0xFFF
57 #define EFUCFG_WR_STR_SHIFT 0
59 #define EFUSTATE_WR_DONE BIT(1)
60 #define EFUSTATE_RD_DONE BIT(0)
68 /* main entry point */
69 static int jz4780_efuse_read(void *context, unsigned int offset,
70 void *val, size_t bytes)
72 struct jz4780_efuse *efuse = context;
75 size_t start = offset & ~(JZ_EFU_READ_SIZE - 1);
76 size_t chunk = min(bytes, (start + JZ_EFU_READ_SIZE)
78 char buf[JZ_EFU_READ_SIZE];
83 ctrl = (start << EFUCTRL_ADDR_SHIFT)
84 | ((JZ_EFU_READ_SIZE - 1) << EFUCTRL_LEN_SHIFT)
87 regmap_update_bits(efuse->map, JZ_EFUCTRL,
88 (EFUCTRL_ADDR_MASK << EFUCTRL_ADDR_SHIFT) |
89 (EFUCTRL_LEN_MASK << EFUCTRL_LEN_SHIFT) |
90 EFUCTRL_PG_EN | EFUCTRL_WR_EN |
94 ret = regmap_read_poll_timeout(efuse->map, JZ_EFUSTATE,
95 tmp, tmp & EFUSTATE_RD_DONE,
99 dev_err(efuse->dev, "Time out while reading efuse data");
103 ret = regmap_bulk_read(efuse->map, JZ_EFUDATA(0),
104 buf, JZ_EFU_READ_SIZE / sizeof(u32));
108 memcpy(val, &buf[offset - start], chunk);
118 static struct nvmem_config jz4780_efuse_nvmem_config = {
119 .name = "jz4780-efuse",
123 .owner = THIS_MODULE,
124 .reg_read = jz4780_efuse_read,
127 static const struct regmap_config jz4780_efuse_regmap_config = {
131 .max_register = JZ_EFUDATA(7),
134 static void clk_disable_unprepare_helper(void *clock)
136 clk_disable_unprepare(clock);
139 static int jz4780_efuse_probe(struct platform_device *pdev)
141 struct nvmem_device *nvmem;
142 struct jz4780_efuse *efuse;
143 struct nvmem_config cfg;
144 unsigned long clk_rate;
145 unsigned long rd_adj;
146 unsigned long rd_strobe;
147 struct device *dev = &pdev->dev;
151 efuse = devm_kzalloc(dev, sizeof(*efuse), GFP_KERNEL);
155 regs = devm_platform_ioremap_resource(pdev, 0);
157 return PTR_ERR(regs);
159 efuse->map = devm_regmap_init_mmio(dev, regs,
160 &jz4780_efuse_regmap_config);
161 if (IS_ERR(efuse->map))
162 return PTR_ERR(efuse->map);
164 efuse->clk = devm_clk_get(&pdev->dev, NULL);
165 if (IS_ERR(efuse->clk))
166 return PTR_ERR(efuse->clk);
168 ret = clk_prepare_enable(efuse->clk);
172 ret = devm_add_action_or_reset(&pdev->dev,
173 clk_disable_unprepare_helper,
178 clk_rate = clk_get_rate(efuse->clk);
183 * rd_adj and rd_strobe are 4 bit values
185 * bus clk_period * (rd_adj + 1) > 6.5ns
186 * bus clk_period * (rd_adj + 5 + rd_strobe) > 35ns
187 * i.e. rd_adj >= 6.5ns / clk_period
188 * i.e. rd_strobe >= 35 ns / clk_period - 5 - rd_adj + 1
190 * 1 / 6.5ns == 153846154 Hz
191 * 1 / 35ns == 28571429 Hz
194 rd_adj = clk_rate / 153846154;
195 rd_strobe = clk_rate / 28571429 - 5 - rd_adj + 1;
197 if (rd_adj > EFUCFG_RD_ADJ_MASK ||
198 rd_strobe > EFUCFG_RD_STR_MASK) {
199 dev_err(&pdev->dev, "Cannot set clock configuration\n");
203 regmap_update_bits(efuse->map, JZ_EFUCFG,
204 (EFUCFG_RD_ADJ_MASK << EFUCFG_RD_ADJ_SHIFT) |
205 (EFUCFG_RD_STR_MASK << EFUCFG_RD_STR_SHIFT),
206 (rd_adj << EFUCFG_RD_ADJ_SHIFT) |
207 (rd_strobe << EFUCFG_RD_STR_SHIFT));
209 cfg = jz4780_efuse_nvmem_config;
210 cfg.dev = &pdev->dev;
213 nvmem = devm_nvmem_register(dev, &cfg);
215 return PTR_ERR_OR_ZERO(nvmem);
218 static const struct of_device_id jz4780_efuse_match[] = {
219 { .compatible = "ingenic,jz4780-efuse" },
222 MODULE_DEVICE_TABLE(of, jz4780_efuse_match);
224 static struct platform_driver jz4780_efuse_driver = {
225 .probe = jz4780_efuse_probe,
227 .name = "jz4780-efuse",
228 .of_match_table = jz4780_efuse_match,
231 module_platform_driver(jz4780_efuse_driver);
233 MODULE_AUTHOR("PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>");
234 MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
235 MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
236 MODULE_DESCRIPTION("Ingenic JZ4780 efuse driver");
237 MODULE_LICENSE("GPL v2");