GNU Linux-libre 4.14.332-gnu1
[releases.git] / drivers / nfc / st-nci / st-nci.h
1 /*
2  * NCI based Driver for STMicroelectronics NFC Chip
3  *
4  * Copyright (C) 2014  STMicroelectronics SAS. All rights reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, see <http://www.gnu.org/licenses/>.
17  */
18
19 #ifndef __LOCAL_ST_NCI_H_
20 #define __LOCAL_ST_NCI_H_
21
22 #include "ndlc.h"
23
24 /* Define private flags: */
25 #define ST_NCI_RUNNING                  1
26
27 #define ST_NCI_CORE_PROP                0x01
28 #define ST_NCI_SET_NFC_MODE             0x02
29
30 /*
31  * ref ISO7816-3 chap 8.1. the initial character TS is followed by a
32  * sequence of at most 32 characters.
33  */
34 #define ST_NCI_ESE_MAX_LENGTH  33
35
36 #define ST_NCI_DEVICE_MGNT_GATE         0x01
37
38 #define ST_NCI_VENDOR_OUI 0x0080E1 /* STMicroelectronics */
39 #define ST_NCI_FACTORY_MODE 2
40
41 struct nci_mode_set_cmd {
42         u8 cmd_type;
43         u8 mode;
44 } __packed;
45
46 struct nci_mode_set_rsp {
47         u8 status;
48 } __packed;
49
50 struct st_nci_se_status {
51         bool is_ese_present;
52         bool is_uicc_present;
53 };
54
55 struct st_nci_se_info {
56         struct st_nci_se_status *se_status;
57         u8 atr[ST_NCI_ESE_MAX_LENGTH];
58         struct completion req_completion;
59
60         struct timer_list bwi_timer;
61         int wt_timeout; /* in msecs */
62         bool bwi_active;
63
64         struct timer_list se_active_timer;
65         bool se_active;
66
67         bool xch_error;
68
69         se_io_cb_t cb;
70         void *cb_context;
71 };
72
73 /**
74  * enum nfc_vendor_cmds - supported nfc vendor commands
75  *
76  * @FACTORY_MODE: Allow to set the driver into a mode where no secure element
77  *      are activated. It does not consider any NFC_ATTR_VENDOR_DATA.
78  * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command.
79  *      It does not consider any NFC_ATTR_VENDOR_DATA.
80  * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example
81  *      RF trimmings or low level drivers configurations (I2C, SPI, SWP).
82  * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing
83  *      table following RF technology, CLF mode or protocol.
84  * @HCI_DM_GET_INFO: Allow to retrieve CLF information.
85  * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low
86  *      level drivers configurations or RF trimmings.
87  * @HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF. A complete
88  *      packet can be more than 8KB.
89  * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF
90  *      configuration changes without CLF power off.
91  * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the
92  *      white list).
93  * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF
94  *      technology. When using this command to anti-collision is done.
95  * @LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity.
96  * @HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied on the
97  *      CLF antenna. A value between 0 and 0x0f is returned. 0 is maximum.
98  * @HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode. It is a
99  *      specific CLF command as there is no GPIO for this.
100  * @HCI_DM_FWUPD_END:  Allow to complete firmware update.
101  * @HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied on the
102  *      CLF antenna to a reference value.
103  * @MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data
104  *      received during a NCI_CORE_INIT_CMD.
105  */
106 enum nfc_vendor_cmds {
107         FACTORY_MODE,
108         HCI_CLEAR_ALL_PIPES,
109         HCI_DM_PUT_DATA,
110         HCI_DM_UPDATE_AID,
111         HCI_DM_GET_INFO,
112         HCI_DM_GET_DATA,
113         HCI_DM_DIRECT_LOAD,
114         HCI_DM_RESET,
115         HCI_GET_PARAM,
116         HCI_DM_FIELD_GENERATOR,
117         LOOPBACK,
118         HCI_DM_FWUPD_START,
119         HCI_DM_FWUPD_END,
120         HCI_DM_VDC_MEASUREMENT_VALUE,
121         HCI_DM_VDC_VALUE_COMPARISON,
122         MANUFACTURER_SPECIFIC,
123 };
124
125 struct st_nci_info {
126         struct llt_ndlc *ndlc;
127         unsigned long flags;
128
129         struct st_nci_se_info se_info;
130 };
131
132 void st_nci_remove(struct nci_dev *ndev);
133 int st_nci_probe(struct llt_ndlc *ndlc, int phy_headroom,
134                  int phy_tailroom, struct st_nci_se_status *se_status);
135
136 int st_nci_se_init(struct nci_dev *ndev, struct st_nci_se_status *se_status);
137 void st_nci_se_deinit(struct nci_dev *ndev);
138
139 int st_nci_discover_se(struct nci_dev *ndev);
140 int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx);
141 int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx);
142 int st_nci_se_io(struct nci_dev *ndev, u32 se_idx,
143                                 u8 *apdu, size_t apdu_length,
144                                 se_io_cb_t cb, void *cb_context);
145 int st_nci_hci_load_session(struct nci_dev *ndev);
146 void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe,
147                                         u8 event, struct sk_buff *skb);
148 void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
149                                                 struct sk_buff *skb);
150
151 int st_nci_vendor_cmds_init(struct nci_dev *ndev);
152
153 #endif /* __LOCAL_ST_NCI_H_ */