drivers/net/wireless/ti/wl18xx/main.c

   1 /*
   2  * This file is part of wl18xx
   3  *
   4  * Copyright (C) 2011 Texas Instruments
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * version 2 as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope that it will be useful, but
  11  * WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  13  * General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  18  * 02110-1301 USA
  19  *
  20  */
  21
  22 #include <linux/module.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/ip.h>
  25 #include <linux/firmware.h>
  26 #include <linux/etherdevice.h>
  27 #include <linux/irq.h>
  28
  29 #include "../wlcore/wlcore.h"
  30 #include "../wlcore/debug.h"
  31 #include "../wlcore/io.h"
  32 #include "../wlcore/acx.h"
  33 #include "../wlcore/tx.h"
  34 #include "../wlcore/rx.h"
  35 #include "../wlcore/boot.h"
  36
  37 #include "reg.h"
  38 #include "conf.h"
  39 #include "cmd.h"
  40 #include "acx.h"
  41 #include "tx.h"
  42 #include "wl18xx.h"
  43 #include "io.h"
  44 #include "scan.h"
  45 #include "event.h"
  46 #include "debugfs.h"
  47
  48 #define WL18XX_RX_CHECKSUM_MASK      0x40
  49
  50 static char *ht_mode_param = NULL;
  51 static char *board_type_param = NULL;
  52 static bool checksum_param = false;
  53 static int num_rx_desc_param = -1;
  54
  55 /* phy paramters */
  56 static int dc2dc_param = -1;
  57 static int n_antennas_2_param = -1;
  58 static int n_antennas_5_param = -1;
  59 static int low_band_component_param = -1;
  60 static int low_band_component_type_param = -1;
  61 static int high_band_component_param = -1;
  62 static int high_band_component_type_param = -1;
  63 static int pwr_limit_reference_11_abg_param = -1;
  64
  65 static const u8 wl18xx_rate_to_idx_2ghz[] = {
  66         /* MCS rates are used only with 11n */
  67         15,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */
  68         14,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS14 */
  69         13,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS13 */
  70         12,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS12 */
  71         11,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS11 */
  72         10,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS10 */
  73         9,                             /* WL18XX_CONF_HW_RXTX_RATE_MCS9 */
  74         8,                             /* WL18XX_CONF_HW_RXTX_RATE_MCS8 */
  75         7,                             /* WL18XX_CONF_HW_RXTX_RATE_MCS7 */
  76         6,                             /* WL18XX_CONF_HW_RXTX_RATE_MCS6 */
  77         5,                             /* WL18XX_CONF_HW_RXTX_RATE_MCS5 */
  78         4,                             /* WL18XX_CONF_HW_RXTX_RATE_MCS4 */
  79         3,                             /* WL18XX_CONF_HW_RXTX_RATE_MCS3 */
  80         2,                             /* WL18XX_CONF_HW_RXTX_RATE_MCS2 */
  81         1,                             /* WL18XX_CONF_HW_RXTX_RATE_MCS1 */
  82         0,                             /* WL18XX_CONF_HW_RXTX_RATE_MCS0 */
  83
  84         11,                            /* WL18XX_CONF_HW_RXTX_RATE_54   */
  85         10,                            /* WL18XX_CONF_HW_RXTX_RATE_48   */
  86         9,                             /* WL18XX_CONF_HW_RXTX_RATE_36   */
  87         8,                             /* WL18XX_CONF_HW_RXTX_RATE_24   */
  88
  89         /* TI-specific rate */
  90         CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_22   */
  91
  92         7,                             /* WL18XX_CONF_HW_RXTX_RATE_18   */
  93         6,                             /* WL18XX_CONF_HW_RXTX_RATE_12   */
  94         3,                             /* WL18XX_CONF_HW_RXTX_RATE_11   */
  95         5,                             /* WL18XX_CONF_HW_RXTX_RATE_9    */
  96         4,                             /* WL18XX_CONF_HW_RXTX_RATE_6    */
  97         2,                             /* WL18XX_CONF_HW_RXTX_RATE_5_5  */
  98         1,                             /* WL18XX_CONF_HW_RXTX_RATE_2    */
  99         0                              /* WL18XX_CONF_HW_RXTX_RATE_1    */
 100 };
 101
 102 static const u8 wl18xx_rate_to_idx_5ghz[] = {
 103         /* MCS rates are used only with 11n */
 104         15,                           /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */
 105         14,                           /* WL18XX_CONF_HW_RXTX_RATE_MCS14 */
 106         13,                           /* WL18XX_CONF_HW_RXTX_RATE_MCS13 */
 107         12,                           /* WL18XX_CONF_HW_RXTX_RATE_MCS12 */
 108         11,                           /* WL18XX_CONF_HW_RXTX_RATE_MCS11 */
 109         10,                           /* WL18XX_CONF_HW_RXTX_RATE_MCS10 */
 110         9,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS9 */
 111         8,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS8 */
 112         7,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS7 */
 113         6,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS6 */
 114         5,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS5 */
 115         4,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS4 */
 116         3,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS3 */
 117         2,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS2 */
 118         1,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS1 */
 119         0,                            /* WL18XX_CONF_HW_RXTX_RATE_MCS0 */
 120
 121         7,                             /* WL18XX_CONF_HW_RXTX_RATE_54   */
 122         6,                             /* WL18XX_CONF_HW_RXTX_RATE_48   */
 123         5,                             /* WL18XX_CONF_HW_RXTX_RATE_36   */
 124         4,                             /* WL18XX_CONF_HW_RXTX_RATE_24   */
 125
 126         /* TI-specific rate */
 127         CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_22   */
 128
 129         3,                             /* WL18XX_CONF_HW_RXTX_RATE_18   */
 130         2,                             /* WL18XX_CONF_HW_RXTX_RATE_12   */
 131         CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_11   */
 132         1,                             /* WL18XX_CONF_HW_RXTX_RATE_9    */
 133         0,                             /* WL18XX_CONF_HW_RXTX_RATE_6    */
 134         CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_5_5  */
 135         CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_2    */
 136         CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_1    */
 137 };
 138
 139 static const u8 *wl18xx_band_rate_to_idx[] = {
 140         [NL80211_BAND_2GHZ] = wl18xx_rate_to_idx_2ghz,
 141         [NL80211_BAND_5GHZ] = wl18xx_rate_to_idx_5ghz
 142 };
 143
 144 enum wl18xx_hw_rates {
 145         WL18XX_CONF_HW_RXTX_RATE_MCS15 = 0,
 146         WL18XX_CONF_HW_RXTX_RATE_MCS14,
 147         WL18XX_CONF_HW_RXTX_RATE_MCS13,
 148         WL18XX_CONF_HW_RXTX_RATE_MCS12,
 149         WL18XX_CONF_HW_RXTX_RATE_MCS11,
 150         WL18XX_CONF_HW_RXTX_RATE_MCS10,
 151         WL18XX_CONF_HW_RXTX_RATE_MCS9,
 152         WL18XX_CONF_HW_RXTX_RATE_MCS8,
 153         WL18XX_CONF_HW_RXTX_RATE_MCS7,
 154         WL18XX_CONF_HW_RXTX_RATE_MCS6,
 155         WL18XX_CONF_HW_RXTX_RATE_MCS5,
 156         WL18XX_CONF_HW_RXTX_RATE_MCS4,
 157         WL18XX_CONF_HW_RXTX_RATE_MCS3,
 158         WL18XX_CONF_HW_RXTX_RATE_MCS2,
 159         WL18XX_CONF_HW_RXTX_RATE_MCS1,
 160         WL18XX_CONF_HW_RXTX_RATE_MCS0,
 161         WL18XX_CONF_HW_RXTX_RATE_54,
 162         WL18XX_CONF_HW_RXTX_RATE_48,
 163         WL18XX_CONF_HW_RXTX_RATE_36,
 164         WL18XX_CONF_HW_RXTX_RATE_24,
 165         WL18XX_CONF_HW_RXTX_RATE_22,
 166         WL18XX_CONF_HW_RXTX_RATE_18,
 167         WL18XX_CONF_HW_RXTX_RATE_12,
 168         WL18XX_CONF_HW_RXTX_RATE_11,
 169         WL18XX_CONF_HW_RXTX_RATE_9,
 170         WL18XX_CONF_HW_RXTX_RATE_6,
 171         WL18XX_CONF_HW_RXTX_RATE_5_5,
 172         WL18XX_CONF_HW_RXTX_RATE_2,
 173         WL18XX_CONF_HW_RXTX_RATE_1,
 174         WL18XX_CONF_HW_RXTX_RATE_MAX,
 175 };
 176
 177 static struct wlcore_conf wl18xx_conf = {
 178         .sg = {
 179                 .params = {
 180                         [WL18XX_CONF_SG_PARAM_0] = 0,
 181                         /* Configuartion Parameters */
 182                         [WL18XX_CONF_SG_ANTENNA_CONFIGURATION] = 0,
 183                         [WL18XX_CONF_SG_ZIGBEE_COEX] = 0,
 184                         [WL18XX_CONF_SG_TIME_SYNC] = 0,
 185                         [WL18XX_CONF_SG_PARAM_4] = 0,
 186                         [WL18XX_CONF_SG_PARAM_5] = 0,
 187                         [WL18XX_CONF_SG_PARAM_6] = 0,
 188                         [WL18XX_CONF_SG_PARAM_7] = 0,
 189                         [WL18XX_CONF_SG_PARAM_8] = 0,
 190                         [WL18XX_CONF_SG_PARAM_9] = 0,
 191                         [WL18XX_CONF_SG_PARAM_10] = 0,
 192                         [WL18XX_CONF_SG_PARAM_11] = 0,
 193                         [WL18XX_CONF_SG_PARAM_12] = 0,
 194                         [WL18XX_CONF_SG_PARAM_13] = 0,
 195                         [WL18XX_CONF_SG_PARAM_14] = 0,
 196                         [WL18XX_CONF_SG_PARAM_15] = 0,
 197                         [WL18XX_CONF_SG_PARAM_16] = 0,
 198                         [WL18XX_CONF_SG_PARAM_17] = 0,
 199                         [WL18XX_CONF_SG_PARAM_18] = 0,
 200                         [WL18XX_CONF_SG_PARAM_19] = 0,
 201                         [WL18XX_CONF_SG_PARAM_20] = 0,
 202                         [WL18XX_CONF_SG_PARAM_21] = 0,
 203                         [WL18XX_CONF_SG_PARAM_22] = 0,
 204                         [WL18XX_CONF_SG_PARAM_23] = 0,
 205                         [WL18XX_CONF_SG_PARAM_24] = 0,
 206                         [WL18XX_CONF_SG_PARAM_25] = 0,
 207                         /* Active Scan Parameters */
 208                         [WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
 209                         [WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
 210                         [WL18XX_CONF_SG_PARAM_28] = 0,
 211                         /* Passive Scan Parameters */
 212                         [WL18XX_CONF_SG_PARAM_29] = 0,
 213                         [WL18XX_CONF_SG_PARAM_30] = 0,
 214                         [WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
 215                         /* Passive Scan in Dual Antenna Parameters */
 216                         [WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
 217                         [WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN] = 0,
 218                         [WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN] = 0,
 219                         /* General Parameters */
 220                         [WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
 221                         [WL18XX_CONF_SG_PARAM_36] = 0,
 222                         [WL18XX_CONF_SG_BEACON_MISS_PERCENT] = 60,
 223                         [WL18XX_CONF_SG_PARAM_38] = 0,
 224                         [WL18XX_CONF_SG_RXT] = 1200,
 225                         [WL18XX_CONF_SG_UNUSED] = 0,
 226                         [WL18XX_CONF_SG_ADAPTIVE_RXT_TXT] = 1,
 227                         [WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
 228                         [WL18XX_CONF_SG_HV3_MAX_SERVED] = 6,
 229                         [WL18XX_CONF_SG_PARAM_44] = 0,
 230                         [WL18XX_CONF_SG_PARAM_45] = 0,
 231                         [WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
 232                         [WL18XX_CONF_SG_GEMINI_PARAM_47] = 0,
 233                         [WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 0,
 234                         /* AP Parameters */
 235                         [WL18XX_CONF_SG_AP_BEACON_MISS_TX] = 3,
 236                         [WL18XX_CONF_SG_PARAM_50] = 0,
 237                         [WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL] = 2,
 238                         [WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME] = 30,
 239                         [WL18XX_CONF_SG_PARAM_53] = 0,
 240                         [WL18XX_CONF_SG_PARAM_54] = 0,
 241                         /* CTS Diluting Parameters */
 242                         [WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
 243                         [WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
 244                         [WL18XX_CONF_SG_TEMP_PARAM_1] = 0,
 245                         [WL18XX_CONF_SG_TEMP_PARAM_2] = 0,
 246                         [WL18XX_CONF_SG_TEMP_PARAM_3] = 0,
 247                         [WL18XX_CONF_SG_TEMP_PARAM_4] = 0,
 248                         [WL18XX_CONF_SG_TEMP_PARAM_5] = 0,
 249                         [WL18XX_CONF_SG_TEMP_PARAM_6] = 0,
 250                         [WL18XX_CONF_SG_TEMP_PARAM_7] = 0,
 251                         [WL18XX_CONF_SG_TEMP_PARAM_8] = 0,
 252                         [WL18XX_CONF_SG_TEMP_PARAM_9] = 0,
 253                         [WL18XX_CONF_SG_TEMP_PARAM_10] = 0,
 254                 },
 255                 .state = CONF_SG_PROTECTIVE,
 256         },
 257         .rx = {
 258                 .rx_msdu_life_time           = 512000,
 259                 .packet_detection_threshold  = 0,
 260                 .ps_poll_timeout             = 15,
 261                 .upsd_timeout                = 15,
 262                 .rts_threshold               = IEEE80211_MAX_RTS_THRESHOLD,
 263                 .rx_cca_threshold            = 0,
 264                 .irq_blk_threshold           = 0xFFFF,
 265                 .irq_pkt_threshold           = 0,
 266                 .irq_timeout                 = 600,
 267                 .queue_type                  = CONF_RX_QUEUE_TYPE_LOW_PRIORITY,
 268         },
 269         .tx = {
 270                 .tx_energy_detection         = 0,
 271                 .sta_rc_conf                 = {
 272                         .enabled_rates       = 0,
 273                         .short_retry_limit   = 10,
 274                         .long_retry_limit    = 10,
 275                         .aflags              = 0,
 276                 },
 277                 .ac_conf_count               = 4,
 278                 .ac_conf                     = {
 279                         [CONF_TX_AC_BE] = {
 280                                 .ac          = CONF_TX_AC_BE,
 281                                 .cw_min      = 15,
 282                                 .cw_max      = 63,
 283                                 .aifsn       = 3,
 284                                 .tx_op_limit = 0,
 285                         },
 286                         [CONF_TX_AC_BK] = {
 287                                 .ac          = CONF_TX_AC_BK,
 288                                 .cw_min      = 15,
 289                                 .cw_max      = 63,
 290                                 .aifsn       = 7,
 291                                 .tx_op_limit = 0,
 292                         },
 293                         [CONF_TX_AC_VI] = {
 294                                 .ac          = CONF_TX_AC_VI,
 295                                 .cw_min      = 15,
 296                                 .cw_max      = 63,
 297                                 .aifsn       = CONF_TX_AIFS_PIFS,
 298                                 .tx_op_limit = 3008,
 299                         },
 300                         [CONF_TX_AC_VO] = {
 301                                 .ac          = CONF_TX_AC_VO,
 302                                 .cw_min      = 15,
 303                                 .cw_max      = 63,
 304                                 .aifsn       = CONF_TX_AIFS_PIFS,
 305                                 .tx_op_limit = 1504,
 306                         },
 307                 },
 308                 .max_tx_retries = 100,
 309                 .ap_aging_period = 300,
 310                 .tid_conf_count = 4,
 311                 .tid_conf = {
 312                         [CONF_TX_AC_BE] = {
 313                                 .queue_id    = CONF_TX_AC_BE,
 314                                 .channel_type = CONF_CHANNEL_TYPE_EDCF,
 315                                 .tsid        = CONF_TX_AC_BE,
 316                                 .ps_scheme   = CONF_PS_SCHEME_LEGACY,
 317                                 .ack_policy  = CONF_ACK_POLICY_LEGACY,
 318                                 .apsd_conf   = {0, 0},
 319                         },
 320                         [CONF_TX_AC_BK] = {
 321                                 .queue_id    = CONF_TX_AC_BK,
 322                                 .channel_type = CONF_CHANNEL_TYPE_EDCF,
 323                                 .tsid        = CONF_TX_AC_BK,
 324                                 .ps_scheme   = CONF_PS_SCHEME_LEGACY,
 325                                 .ack_policy  = CONF_ACK_POLICY_LEGACY,
 326                                 .apsd_conf   = {0, 0},
 327                         },
 328                         [CONF_TX_AC_VI] = {
 329                                 .queue_id    = CONF_TX_AC_VI,
 330                                 .channel_type = CONF_CHANNEL_TYPE_EDCF,
 331                                 .tsid        = CONF_TX_AC_VI,
 332                                 .ps_scheme   = CONF_PS_SCHEME_LEGACY,
 333                                 .ack_policy  = CONF_ACK_POLICY_LEGACY,
 334                                 .apsd_conf   = {0, 0},
 335                         },
 336                         [CONF_TX_AC_VO] = {
 337                                 .queue_id    = CONF_TX_AC_VO,
 338                                 .channel_type = CONF_CHANNEL_TYPE_EDCF,
 339                                 .tsid        = CONF_TX_AC_VO,
 340                                 .ps_scheme   = CONF_PS_SCHEME_LEGACY,
 341                                 .ack_policy  = CONF_ACK_POLICY_LEGACY,
 342                                 .apsd_conf   = {0, 0},
 343                         },
 344                 },
 345                 .frag_threshold              = IEEE80211_MAX_FRAG_THRESHOLD,
 346                 .tx_compl_timeout            = 350,
 347                 .tx_compl_threshold          = 10,
 348                 .basic_rate                  = CONF_HW_BIT_RATE_1MBPS,
 349                 .basic_rate_5                = CONF_HW_BIT_RATE_6MBPS,
 350                 .tmpl_short_retry_limit      = 10,
 351                 .tmpl_long_retry_limit       = 10,
 352                 .tx_watchdog_timeout         = 5000,
 353                 .slow_link_thold             = 3,
 354                 .fast_link_thold             = 30,
 355         },
 356         .conn = {
 357                 .wake_up_event               = CONF_WAKE_UP_EVENT_DTIM,
 358                 .listen_interval             = 1,
 359                 .suspend_wake_up_event       = CONF_WAKE_UP_EVENT_N_DTIM,
 360                 .suspend_listen_interval     = 3,
 361                 .bcn_filt_mode               = CONF_BCN_FILT_MODE_ENABLED,
 362                 .bcn_filt_ie_count           = 3,
 363                 .bcn_filt_ie = {
 364                         [0] = {
 365                                 .ie          = WLAN_EID_CHANNEL_SWITCH,
 366                                 .rule        = CONF_BCN_RULE_PASS_ON_APPEARANCE,
 367                         },
 368                         [1] = {
 369                                 .ie          = WLAN_EID_HT_OPERATION,
 370                                 .rule        = CONF_BCN_RULE_PASS_ON_CHANGE,
 371                         },
 372                         [2] = {
 373                                 .ie          = WLAN_EID_ERP_INFO,
 374                                 .rule        = CONF_BCN_RULE_PASS_ON_CHANGE,
 375                         },
 376                 },
 377                 .synch_fail_thold            = 12,
 378                 .bss_lose_timeout            = 400,
 379                 .beacon_rx_timeout           = 10000,
 380                 .broadcast_timeout           = 20000,
 381                 .rx_broadcast_in_ps          = 1,
 382                 .ps_poll_threshold           = 10,
 383                 .bet_enable                  = CONF_BET_MODE_ENABLE,
 384                 .bet_max_consecutive         = 50,
 385                 .psm_entry_retries           = 8,
 386                 .psm_exit_retries            = 16,
 387                 .psm_entry_nullfunc_retries  = 3,
 388                 .dynamic_ps_timeout          = 1500,
 389                 .forced_ps                   = false,
 390                 .keep_alive_interval         = 55000,
 391                 .max_listen_interval         = 20,
 392                 .sta_sleep_auth              = WL1271_PSM_ILLEGAL,
 393                 .suspend_rx_ba_activity      = 0,
 394         },
 395         .itrim = {
 396                 .enable = false,
 397                 .timeout = 50000,
 398         },
 399         .pm_config = {
 400                 .host_clk_settling_time = 5000,
 401                 .host_fast_wakeup_support = CONF_FAST_WAKEUP_DISABLE,
 402         },
 403         .roam_trigger = {
 404                 .trigger_pacing               = 1,
 405                 .avg_weight_rssi_beacon       = 20,
 406                 .avg_weight_rssi_data         = 10,
 407                 .avg_weight_snr_beacon        = 20,
 408                 .avg_weight_snr_data          = 10,
 409         },
 410         .scan = {
 411                 .min_dwell_time_active        = 7500,
 412                 .max_dwell_time_active        = 30000,
 413                 .min_dwell_time_active_long   = 25000,
 414                 .max_dwell_time_active_long   = 50000,
 415                 .dwell_time_passive           = 100000,
 416                 .dwell_time_dfs               = 150000,
 417                 .num_probe_reqs               = 2,
 418                 .split_scan_timeout           = 50000,
 419         },
 420         .sched_scan = {
 421                 /*
 422                  * Values are in TU/1000 but since sched scan FW command
 423                  * params are in TUs rounding up may occur.
 424                  */
 425                 .base_dwell_time                = 7500,
 426                 .max_dwell_time_delta           = 22500,
 427                 /* based on 250bits per probe @1Mbps */
 428                 .dwell_time_delta_per_probe     = 2000,
 429                 /* based on 250bits per probe @6Mbps (plus a bit more) */
 430                 .dwell_time_delta_per_probe_5   = 350,
 431                 .dwell_time_passive             = 100000,
 432                 .dwell_time_dfs                 = 150000,
 433                 .num_probe_reqs                 = 2,
 434                 .rssi_threshold                 = -90,
 435                 .snr_threshold                  = 0,
 436                 .num_short_intervals            = SCAN_MAX_SHORT_INTERVALS,
 437                 .long_interval                  = 30000,
 438         },
 439         .ht = {
 440                 .rx_ba_win_size = 32,
 441                 .tx_ba_win_size = 64,
 442                 .inactivity_timeout = 10000,
 443                 .tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP,
 444         },
 445         .mem = {
 446                 .num_stations                 = 1,
 447                 .ssid_profiles                = 1,
 448                 .rx_block_num                 = 40,
 449                 .tx_min_block_num             = 40,
 450                 .dynamic_memory               = 1,
 451                 .min_req_tx_blocks            = 45,
 452                 .min_req_rx_blocks            = 22,
 453                 .tx_min                       = 27,
 454         },
 455         .fm_coex = {
 456                 .enable                       = true,
 457                 .swallow_period               = 5,
 458                 .n_divider_fref_set_1         = 0xff,       /* default */
 459                 .n_divider_fref_set_2         = 12,
 460                 .m_divider_fref_set_1         = 0xffff,
 461                 .m_divider_fref_set_2         = 148,        /* default */
 462                 .coex_pll_stabilization_time  = 0xffffffff, /* default */
 463                 .ldo_stabilization_time       = 0xffff,     /* default */
 464                 .fm_disturbed_band_margin     = 0xff,       /* default */
 465                 .swallow_clk_diff             = 0xff,       /* default */
 466         },
 467         .rx_streaming = {
 468                 .duration                      = 150,
 469                 .queues                        = 0x1,
 470                 .interval                      = 20,
 471                 .always                        = 0,
 472         },
 473         .fwlog = {
 474                 .mode                         = WL12XX_FWLOG_CONTINUOUS,
 475                 .mem_blocks                   = 0,
 476                 .severity                     = 0,
 477                 .timestamp                    = WL12XX_FWLOG_TIMESTAMP_DISABLED,
 478                 .output                       = WL12XX_FWLOG_OUTPUT_DBG_PINS,
 479                 .threshold                    = 0,
 480         },
 481         .rate = {
 482                 .rate_retry_score = 32000,
 483                 .per_add = 8192,
 484                 .per_th1 = 2048,
 485                 .per_th2 = 4096,
 486                 .max_per = 8100,
 487                 .inverse_curiosity_factor = 5,
 488                 .tx_fail_low_th = 4,
 489                 .tx_fail_high_th = 10,
 490                 .per_alpha_shift = 4,
 491                 .per_add_shift = 13,
 492                 .per_beta1_shift = 10,
 493                 .per_beta2_shift = 8,
 494                 .rate_check_up = 2,
 495                 .rate_check_down = 12,
 496                 .rate_retry_policy = {
 497                         0x00, 0x00, 0x00, 0x00, 0x00,
 498                         0x00, 0x00, 0x00, 0x00, 0x00,
 499                         0x00, 0x00, 0x00,
 500                 },
 501         },
 502         .hangover = {
 503                 .recover_time               = 0,
 504                 .hangover_period            = 20,
 505                 .dynamic_mode               = 1,
 506                 .early_termination_mode     = 1,
 507                 .max_period                 = 20,
 508                 .min_period                 = 1,
 509                 .increase_delta             = 1,
 510                 .decrease_delta             = 2,
 511                 .quiet_time                 = 4,
 512                 .increase_time              = 1,
 513                 .window_size                = 16,
 514         },
 515         .recovery = {
 516                 .bug_on_recovery            = 0,
 517                 .no_recovery                = 0,
 518         },
 519 };
 520
 521 static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
 522         .ht = {
 523                 .mode                           = HT_MODE_WIDE,
 524         },
 525         .phy = {
 526                 .phy_standalone                 = 0x00,
 527                 .primary_clock_setting_time     = 0x05,
 528                 .clock_valid_on_wake_up         = 0x00,
 529                 .secondary_clock_setting_time   = 0x05,
 530                 .board_type                     = BOARD_TYPE_HDK_18XX,
 531                 .auto_detect                    = 0x00,
 532                 .dedicated_fem                  = FEM_NONE,
 533                 .low_band_component             = COMPONENT_3_WAY_SWITCH,
 534                 .low_band_component_type        = 0x05,
 535                 .high_band_component            = COMPONENT_2_WAY_SWITCH,
 536                 .high_band_component_type       = 0x09,
 537                 .tcxo_ldo_voltage               = 0x00,
 538                 .xtal_itrim_val                 = 0x04,
 539                 .srf_state                      = 0x00,
 540                 .io_configuration               = 0x01,
 541                 .sdio_configuration             = 0x00,
 542                 .settings                       = 0x00,
 543                 .enable_clpc                    = 0x00,
 544                 .enable_tx_low_pwr_on_siso_rdl  = 0x00,
 545                 .rx_profile                     = 0x00,
 546                 .pwr_limit_reference_11_abg     = 0x64,
 547                 .per_chan_pwr_limit_arr_11abg   = {
 548                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 549                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 550                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 551                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 552                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 553                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 554                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 555                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 556                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 557                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 558                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 559                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 560                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 561                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 562                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 563                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 564                         0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
 565                 .pwr_limit_reference_11p        = 0x64,
 566                 .per_chan_bo_mode_11_abg        = { 0x00, 0x00, 0x00, 0x00,
 567                                                     0x00, 0x00, 0x00, 0x00,
 568                                                     0x00, 0x00, 0x00, 0x00,
 569                                                     0x00 },
 570                 .per_chan_bo_mode_11_p          = { 0x00, 0x00, 0x00, 0x00 },
 571                 .per_chan_pwr_limit_arr_11p     = { 0xff, 0xff, 0xff, 0xff,
 572                                                     0xff, 0xff, 0xff },
 573                 .psat                           = 0,
 574                 .external_pa_dc2dc              = 0,
 575                 .number_of_assembled_ant2_4     = 2,
 576                 .number_of_assembled_ant5       = 1,
 577                 .low_power_val                  = 0xff,
 578                 .med_power_val                  = 0xff,
 579                 .high_power_val                 = 0xff,
 580                 .low_power_val_2nd              = 0xff,
 581                 .med_power_val_2nd              = 0xff,
 582                 .high_power_val_2nd             = 0xff,
 583                 .tx_rf_margin                   = 1,
 584         },
 585         .ap_sleep = {               /* disabled by default */
 586                 .idle_duty_cycle        = 0,
 587                 .connected_duty_cycle   = 0,
 588                 .max_stations_thresh    = 0,
 589                 .idle_conn_thresh       = 0,
 590         },
 591 };
 592
 593 static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = {
 594         [PART_TOP_PRCM_ELP_SOC] = {
 595                 .mem  = { .start = 0x00A00000, .size  = 0x00012000 },
 596                 .reg  = { .start = 0x00807000, .size  = 0x00005000 },
 597                 .mem2 = { .start = 0x00800000, .size  = 0x0000B000 },
 598                 .mem3 = { .start = 0x00401594, .size  = 0x00001020 },
 599         },
 600         [PART_DOWN] = {
 601                 .mem  = { .start = 0x00000000, .size  = 0x00014000 },
 602                 .reg  = { .start = 0x00810000, .size  = 0x0000BFFF },
 603                 .mem2 = { .start = 0x00000000, .size  = 0x00000000 },
 604                 .mem3 = { .start = 0x00000000, .size  = 0x00000000 },
 605         },
 606         [PART_BOOT] = {
 607                 .mem  = { .start = 0x00700000, .size = 0x0000030c },
 608                 .reg  = { .start = 0x00802000, .size = 0x00014578 },
 609                 .mem2 = { .start = 0x00B00404, .size = 0x00001000 },
 610                 .mem3 = { .start = 0x00C00000, .size = 0x00000400 },
 611         },
 612         [PART_WORK] = {
 613                 .mem  = { .start = 0x00800000, .size  = 0x000050FC },
 614                 .reg  = { .start = 0x00B00404, .size  = 0x00001000 },
 615                 .mem2 = { .start = 0x00C00000, .size  = 0x00000400 },
 616                 .mem3 = { .start = 0x00401594, .size  = 0x00001020 },
 617         },
 618         [PART_PHY_INIT] = {
 619                 .mem  = { .start = WL18XX_PHY_INIT_MEM_ADDR,
 620                           .size  = WL18XX_PHY_INIT_MEM_SIZE },
 621                 .reg  = { .start = 0x00000000, .size = 0x00000000 },
 622                 .mem2 = { .start = 0x00000000, .size = 0x00000000 },
 623                 .mem3 = { .start = 0x00000000, .size = 0x00000000 },
 624         },
 625 };
 626
 627 static const int wl18xx_rtable[REG_TABLE_LEN] = {
 628         [REG_ECPU_CONTROL]              = WL18XX_REG_ECPU_CONTROL,
 629         [REG_INTERRUPT_NO_CLEAR]        = WL18XX_REG_INTERRUPT_NO_CLEAR,
 630         [REG_INTERRUPT_ACK]             = WL18XX_REG_INTERRUPT_ACK,
 631         [REG_COMMAND_MAILBOX_PTR]       = WL18XX_REG_COMMAND_MAILBOX_PTR,
 632         [REG_EVENT_MAILBOX_PTR]         = WL18XX_REG_EVENT_MAILBOX_PTR,
 633         [REG_INTERRUPT_TRIG]            = WL18XX_REG_INTERRUPT_TRIG_H,
 634         [REG_INTERRUPT_MASK]            = WL18XX_REG_INTERRUPT_MASK,
 635         [REG_PC_ON_RECOVERY]            = WL18XX_SCR_PAD4,
 636         [REG_CHIP_ID_B]                 = WL18XX_REG_CHIP_ID_B,
 637         [REG_CMD_MBOX_ADDRESS]          = WL18XX_CMD_MBOX_ADDRESS,
 638
 639         /* data access memory addresses, used with partition translation */
 640         [REG_SLV_MEM_DATA]              = WL18XX_SLV_MEM_DATA,
 641         [REG_SLV_REG_DATA]              = WL18XX_SLV_REG_DATA,
 642
 643         /* raw data access memory addresses */
 644         [REG_RAW_FW_STATUS_ADDR]        = WL18XX_FW_STATUS_ADDR,
 645 };
 646
 647 static const struct wl18xx_clk_cfg wl18xx_clk_table_coex[NUM_CLOCK_CONFIGS] = {
 648         [CLOCK_CONFIG_16_2_M]   = { 8,  121, 0, 0, false },
 649         [CLOCK_CONFIG_16_368_M] = { 8,  120, 0, 0, false },
 650         [CLOCK_CONFIG_16_8_M]   = { 8,  117, 0, 0, false },
 651         [CLOCK_CONFIG_19_2_M]   = { 10, 128, 0, 0, false },
 652         [CLOCK_CONFIG_26_M]     = { 11, 104, 0, 0, false },
 653         [CLOCK_CONFIG_32_736_M] = { 8,  120, 0, 0, false },
 654         [CLOCK_CONFIG_33_6_M]   = { 8,  117, 0, 0, false },
 655         [CLOCK_CONFIG_38_468_M] = { 10, 128, 0, 0, false },
 656         [CLOCK_CONFIG_52_M]     = { 11, 104, 0, 0, false },
 657 };
 658
 659 static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = {
 660         [CLOCK_CONFIG_16_2_M]   = { 7,  104,  801, 4,  true },
 661         [CLOCK_CONFIG_16_368_M] = { 9,  132, 3751, 4,  true },
 662         [CLOCK_CONFIG_16_8_M]   = { 7,  100,    0, 0, false },
 663         [CLOCK_CONFIG_19_2_M]   = { 8,  100,    0, 0, false },
 664         [CLOCK_CONFIG_26_M]     = { 13, 120,    0, 0, false },
 665         [CLOCK_CONFIG_32_736_M] = { 9,  132, 3751, 4,  true },
 666         [CLOCK_CONFIG_33_6_M]   = { 7,  100,    0, 0, false },
 667         [CLOCK_CONFIG_38_468_M] = { 8,  100,    0, 0, false },
 668         [CLOCK_CONFIG_52_M]     = { 13, 120,    0, 0, false },
 669 };
 670
 671 /* TODO: maybe move to a new header file? */
 672 #define WL18XX_FW_NAME "/*(DEBLOBBED)*/"
 673
 674 static int wl18xx_identify_chip(struct wl1271 *wl)
 675 {
 676         int ret = 0;
 677
 678         switch (wl->chip.id) {
 679         case CHIP_ID_185x_PG20:
 680                 wl1271_debug(DEBUG_BOOT, "chip id 0x%x (185x PG20)",
 681                                  wl->chip.id);
 682                 wl->sr_fw_name = WL18XX_FW_NAME;
 683                 /* wl18xx uses the same firmware for PLT */
 684                 wl->plt_fw_name = WL18XX_FW_NAME;
 685                 wl->quirks |= WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN |
 686                               WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
 687                               WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN |
 688                               WLCORE_QUIRK_TX_PAD_LAST_FRAME |
 689                               WLCORE_QUIRK_REGDOMAIN_CONF |
 690                               WLCORE_QUIRK_DUAL_PROBE_TMPL;
 691
 692                 wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER,
 693                                       WL18XX_IFTYPE_VER,  WL18XX_MAJOR_VER,
 694                                       WL18XX_SUBTYPE_VER, WL18XX_MINOR_VER,
 695                                       /* there's no separate multi-role FW */
 696                                       0, 0, 0, 0);
 697                 break;
 698         case CHIP_ID_185x_PG10:
 699                 wl1271_warning("chip id 0x%x (185x PG10) is deprecated",
 700                                wl->chip.id);
 701                 ret = -ENODEV;
 702                 goto out;
 703
 704         default:
 705                 wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
 706                 ret = -ENODEV;
 707                 goto out;
 708         }
 709
 710         wl->fw_mem_block_size = 272;
 711         wl->fwlog_end = 0x40000000;
 712
 713         wl->scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4;
 714         wl->scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5;
 715         wl->sched_scan_templ_id_2_4 = CMD_TEMPL_PROBE_REQ_2_4_PERIODIC;
 716         wl->sched_scan_templ_id_5 = CMD_TEMPL_PROBE_REQ_5_PERIODIC;
 717         wl->max_channels_5 = WL18XX_MAX_CHANNELS_5GHZ;
 718         wl->ba_rx_session_count_max = WL18XX_RX_BA_MAX_SESSIONS;
 719 out:
 720         return ret;
 721 }
 722
 723 static int wl18xx_set_clk(struct wl1271 *wl)
 724 {
 725         u16 clk_freq;
 726         int ret;
 727
 728         ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
 729         if (ret < 0)
 730                 goto out;
 731
 732         /* TODO: PG2: apparently we need to read the clk type */
 733
 734         ret = wl18xx_top_reg_read(wl, PRIMARY_CLK_DETECT, &clk_freq);
 735         if (ret < 0)
 736                 goto out;
 737
 738         wl1271_debug(DEBUG_BOOT, "clock freq %d (%d, %d, %d, %d, %s)", clk_freq,
 739                      wl18xx_clk_table[clk_freq].n, wl18xx_clk_table[clk_freq].m,
 740                      wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q,
 741                      wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit");
 742
 743         /* coex PLL configuration */
 744         ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_N,
 745                                    wl18xx_clk_table_coex[clk_freq].n);
 746         if (ret < 0)
 747                 goto out;
 748
 749         ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_M,
 750                                    wl18xx_clk_table_coex[clk_freq].m);
 751         if (ret < 0)
 752                 goto out;
 753
 754         /* bypass the swallowing logic */
 755         ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN,
 756                                    PLLSH_COEX_PLL_SWALLOW_EN_VAL1);
 757         if (ret < 0)
 758                 goto out;
 759
 760         ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N,
 761                                    wl18xx_clk_table[clk_freq].n);
 762         if (ret < 0)
 763                 goto out;
 764
 765         ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_M,
 766                                    wl18xx_clk_table[clk_freq].m);
 767         if (ret < 0)
 768                 goto out;
 769
 770         if (wl18xx_clk_table[clk_freq].swallow) {
 771                 /* first the 16 lower bits */
 772                 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_1,
 773                                            wl18xx_clk_table[clk_freq].q &
 774                                            PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK);
 775                 if (ret < 0)
 776                         goto out;
 777
 778                 /* then the 16 higher bits, masked out */
 779                 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_2,
 780                                         (wl18xx_clk_table[clk_freq].q >> 16) &
 781                                         PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK);
 782                 if (ret < 0)
 783                         goto out;
 784
 785                 /* first the 16 lower bits */
 786                 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_1,
 787                                            wl18xx_clk_table[clk_freq].p &
 788                                            PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK);
 789                 if (ret < 0)
 790                         goto out;
 791
 792                 /* then the 16 higher bits, masked out */
 793                 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_2,
 794                                         (wl18xx_clk_table[clk_freq].p >> 16) &
 795                                         PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK);
 796         } else {
 797                 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_SWALLOW_EN,
 798                                            PLLSH_WCS_PLL_SWALLOW_EN_VAL2);
 799         }
 800
 801         /* choose WCS PLL */
 802         ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_SEL,
 803                                    PLLSH_WL_PLL_SEL_WCS_PLL);
 804         if (ret < 0)
 805                 goto out;
 806
 807         /* enable both PLLs */
 808         ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL1);
 809         if (ret < 0)
 810                 goto out;
 811
 812         udelay(1000);
 813
 814         /* disable coex PLL */
 815         ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL2);
 816         if (ret < 0)
 817                 goto out;
 818
 819         /* reset the swallowing logic */
 820         ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN,
 821                                    PLLSH_COEX_PLL_SWALLOW_EN_VAL2);
 822         if (ret < 0)
 823                 goto out;
 824
 825 out:
 826         return ret;
 827 }
 828
 829 static int wl18xx_boot_soft_reset(struct wl1271 *wl)
 830 {
 831         int ret;
 832
 833         /* disable Rx/Tx */
 834         ret = wlcore_write32(wl, WL18XX_ENABLE, 0x0);
 835         if (ret < 0)
 836                 goto out;
 837
 838         /* disable auto calibration on start*/
 839         ret = wlcore_write32(wl, WL18XX_SPARE_A2, 0xffff);
 840
 841 out:
 842         return ret;
 843 }
 844
 845 static int wl18xx_pre_boot(struct wl1271 *wl)
 846 {
 847         int ret;
 848
 849         ret = wl18xx_set_clk(wl);
 850         if (ret < 0)
 851                 goto out;
 852
 853         /* Continue the ELP wake up sequence */
 854         ret = wlcore_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
 855         if (ret < 0)
 856                 goto out;
 857
 858         udelay(500);
 859
 860         ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
 861         if (ret < 0)
 862                 goto out;
 863
 864         /* Disable interrupts */
 865         ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
 866         if (ret < 0)
 867                 goto out;
 868
 869         ret = wl18xx_boot_soft_reset(wl);
 870
 871 out:
 872         return ret;
 873 }
 874
 875 static int wl18xx_pre_upload(struct wl1271 *wl)
 876 {
 877         u32 tmp;
 878         int ret;
 879         u16 irq_invert;
 880
 881         BUILD_BUG_ON(sizeof(struct wl18xx_mac_and_phy_params) >
 882                 WL18XX_PHY_INIT_MEM_SIZE);
 883
 884         ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
 885         if (ret < 0)
 886                 goto out;
 887
 888         /* TODO: check if this is all needed */
 889         ret = wlcore_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND);
 890         if (ret < 0)
 891                 goto out;
 892
 893         ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp);
 894         if (ret < 0)
 895                 goto out;
 896
 897         wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
 898
 899         ret = wlcore_read32(wl, WL18XX_SCR_PAD2, &tmp);
 900         if (ret < 0)
 901                 goto out;
 902
 903         /*
 904          * Workaround for FDSP code RAM corruption (needed for PG2.1
 905          * and newer; for older chips it's a NOP).  Change FDSP clock
 906          * settings so that it's muxed to the ATGP clock instead of
 907          * its own clock.
 908          */
 909
 910         ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
 911         if (ret < 0)
 912                 goto out;
 913
 914         /* disable FDSP clock */
 915         ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1,
 916                              MEM_FDSP_CLK_120_DISABLE);
 917         if (ret < 0)
 918                 goto out;
 919
 920         /* set ATPG clock toward FDSP Code RAM rather than its own clock */
 921         ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1,
 922                              MEM_FDSP_CODERAM_FUNC_CLK_SEL);
 923         if (ret < 0)
 924                 goto out;
 925
 926         /* re-enable FDSP clock */
 927         ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1,
 928                              MEM_FDSP_CLK_120_ENABLE);
 929         if (ret < 0)
 930                 goto out;
 931
 932         ret = irq_get_trigger_type(wl->irq);
 933         if ((ret == IRQ_TYPE_LEVEL_LOW) || (ret == IRQ_TYPE_EDGE_FALLING)) {
 934                 wl1271_info("using inverted interrupt logic: %d", ret);
 935                 ret = wlcore_set_partition(wl,
 936                                            &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
 937                 if (ret < 0)
 938                         goto out;
 939
 940                 ret = wl18xx_top_reg_read(wl, TOP_FN0_CCCR_REG_32, &irq_invert);
 941                 if (ret < 0)
 942                         goto out;
 943
 944                 irq_invert |= BIT(1);
 945                 ret = wl18xx_top_reg_write(wl, TOP_FN0_CCCR_REG_32, irq_invert);
 946                 if (ret < 0)
 947                         goto out;
 948
 949                 ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
 950         }
 951
 952 out:
 953         return ret;
 954 }
 955
 956 static int wl18xx_set_mac_and_phy(struct wl1271 *wl)
 957 {
 958         struct wl18xx_priv *priv = wl->priv;
 959         struct wl18xx_mac_and_phy_params *params;
 960         int ret;
 961
 962         params = kmemdup(&priv->conf.phy, sizeof(*params), GFP_KERNEL);
 963         if (!params) {
 964                 ret = -ENOMEM;
 965                 goto out;
 966         }
 967
 968         ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
 969         if (ret < 0)
 970                 goto out;
 971
 972         ret = wlcore_write(wl, WL18XX_PHY_INIT_MEM_ADDR, params,
 973                            sizeof(*params), false);
 974
 975 out:
 976         kfree(params);
 977         return ret;
 978 }
 979
 980 static int wl18xx_enable_interrupts(struct wl1271 *wl)
 981 {
 982         u32 event_mask, intr_mask;
 983         int ret;
 984
 985         event_mask = WL18XX_ACX_EVENTS_VECTOR;
 986         intr_mask = WL18XX_INTR_MASK;
 987
 988         ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, event_mask);
 989         if (ret < 0)
 990                 goto out;
 991
 992         wlcore_enable_interrupts(wl);
 993
 994         ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
 995                                WL1271_ACX_INTR_ALL & ~intr_mask);
 996         if (ret < 0)
 997                 goto disable_interrupts;
 998
 999         return ret;
1000
1001 disable_interrupts:
1002         wlcore_disable_interrupts(wl);
1003
1004 out:
1005         return ret;
1006 }
1007
1008 static int wl18xx_boot(struct wl1271 *wl)
1009 {
1010         int ret;
1011
1012         ret = wl18xx_pre_boot(wl);
1013         if (ret < 0)
1014                 goto out;
1015
1016         ret = wl18xx_pre_upload(wl);
1017         if (ret < 0)
1018                 goto out;
1019
1020         ret = wlcore_boot_upload_firmware(wl);
1021         if (ret < 0)
1022                 goto out;
1023
1024         ret = wl18xx_set_mac_and_phy(wl);
1025         if (ret < 0)
1026                 goto out;
1027
1028         wl->event_mask = BSS_LOSS_EVENT_ID |
1029                 SCAN_COMPLETE_EVENT_ID |
1030                 RADAR_DETECTED_EVENT_ID |
1031                 RSSI_SNR_TRIGGER_0_EVENT_ID |
1032                 PERIODIC_SCAN_COMPLETE_EVENT_ID |
1033                 PERIODIC_SCAN_REPORT_EVENT_ID |
1034                 DUMMY_PACKET_EVENT_ID |
1035                 PEER_REMOVE_COMPLETE_EVENT_ID |
1036                 BA_SESSION_RX_CONSTRAINT_EVENT_ID |
1037                 REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID |
1038                 INACTIVE_STA_EVENT_ID |
1039                 CHANNEL_SWITCH_COMPLETE_EVENT_ID |
1040                 DFS_CHANNELS_CONFIG_COMPLETE_EVENT |
1041                 SMART_CONFIG_SYNC_EVENT_ID |
1042                 SMART_CONFIG_DECODE_EVENT_ID |
1043                 TIME_SYNC_EVENT_ID |
1044                 FW_LOGGER_INDICATION |
1045                 RX_BA_WIN_SIZE_CHANGE_EVENT_ID;
1046
1047         wl->ap_event_mask = MAX_TX_FAILURE_EVENT_ID;
1048
1049         ret = wlcore_boot_run_firmware(wl);
1050         if (ret < 0)
1051                 goto out;
1052
1053         ret = wl18xx_enable_interrupts(wl);
1054
1055 out:
1056         return ret;
1057 }
1058
1059 static int wl18xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
1060                                void *buf, size_t len)
1061 {
1062         struct wl18xx_priv *priv = wl->priv;
1063
1064         memcpy(priv->cmd_buf, buf, len);
1065         memset(priv->cmd_buf + len, 0, WL18XX_CMD_MAX_SIZE - len);
1066
1067         return wlcore_write(wl, cmd_box_addr, priv->cmd_buf,
1068                             WL18XX_CMD_MAX_SIZE, false);
1069 }
1070
1071 static int wl18xx_ack_event(struct wl1271 *wl)
1072 {
1073         return wlcore_write_reg(wl, REG_INTERRUPT_TRIG,
1074                                 WL18XX_INTR_TRIG_EVENT_ACK);
1075 }
1076
1077 static u32 wl18xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks)
1078 {
1079         u32 blk_size = WL18XX_TX_HW_BLOCK_SIZE;
1080         return (len + blk_size - 1) / blk_size + spare_blks;
1081 }
1082
1083 static void
1084 wl18xx_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc,
1085                           u32 blks, u32 spare_blks)
1086 {
1087         desc->wl18xx_mem.total_mem_blocks = blks;
1088 }
1089
1090 static void
1091 wl18xx_set_tx_desc_data_len(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc,
1092                             struct sk_buff *skb)
1093 {
1094         desc->length = cpu_to_le16(skb->len);
1095
1096         /* if only the last frame is to be padded, we unset this bit on Tx */
1097         if (wl->quirks & WLCORE_QUIRK_TX_PAD_LAST_FRAME)
1098                 desc->wl18xx_mem.ctrl = WL18XX_TX_CTRL_NOT_PADDED;
1099         else
1100                 desc->wl18xx_mem.ctrl = 0;
1101
1102         wl1271_debug(DEBUG_TX, "tx_fill_hdr: hlid: %d "
1103                      "len: %d life: %d mem: %d", desc->hlid,
1104                      le16_to_cpu(desc->length),
1105                      le16_to_cpu(desc->life_time),
1106                      desc->wl18xx_mem.total_mem_blocks);
1107 }
1108
1109 static enum wl_rx_buf_align
1110 wl18xx_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc)
1111 {
1112         if (rx_desc & RX_BUF_PADDED_PAYLOAD)
1113                 return WLCORE_RX_BUF_PADDED;
1114
1115         return WLCORE_RX_BUF_ALIGNED;
1116 }
1117
1118 static u32 wl18xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data,
1119                                     u32 data_len)
1120 {
1121         struct wl1271_rx_descriptor *desc = rx_data;
1122
1123         /* invalid packet */
1124         if (data_len < sizeof(*desc))
1125                 return 0;
1126
1127         return data_len - sizeof(*desc);
1128 }
1129
1130 static void wl18xx_tx_immediate_completion(struct wl1271 *wl)
1131 {
1132         wl18xx_tx_immediate_complete(wl);
1133 }
1134
1135 static int wl18xx_set_host_cfg_bitmap(struct wl1271 *wl, u32 extra_mem_blk)
1136 {
1137         int ret;
1138         u32 sdio_align_size = 0;
1139         u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE |
1140                               HOST_IF_CFG_ADD_RX_ALIGNMENT;
1141
1142         /* Enable Tx SDIO padding */
1143         if (wl->quirks & WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN) {
1144                 host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
1145                 sdio_align_size = WL12XX_BUS_BLOCK_SIZE;
1146         }
1147
1148         /* Enable Rx SDIO padding */
1149         if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN) {
1150                 host_cfg_bitmap |= HOST_IF_CFG_RX_PAD_TO_SDIO_BLK;
1151                 sdio_align_size = WL12XX_BUS_BLOCK_SIZE;
1152         }
1153
1154         ret = wl18xx_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap,
1155                                             sdio_align_size, extra_mem_blk,
1156                                             WL18XX_HOST_IF_LEN_SIZE_FIELD);
1157         if (ret < 0)
1158                 return ret;
1159
1160         return 0;
1161 }
1162
1163 static int wl18xx_hw_init(struct wl1271 *wl)
1164 {
1165         int ret;
1166         struct wl18xx_priv *priv = wl->priv;
1167
1168         /* (re)init private structures. Relevant on recovery as well. */
1169         priv->last_fw_rls_idx = 0;
1170         priv->extra_spare_key_count = 0;
1171
1172         /* set the default amount of spare blocks in the bitmap */
1173         ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_BLOCK_SPARE);
1174         if (ret < 0)
1175                 return ret;
1176
1177         /* set the dynamic fw traces bitmap */
1178         ret = wl18xx_acx_dynamic_fw_traces(wl);
1179         if (ret < 0)
1180                 return ret;
1181
1182         if (checksum_param) {
1183                 ret = wl18xx_acx_set_checksum_state(wl);
1184                 if (ret != 0)
1185                         return ret;
1186         }
1187
1188         return ret;
1189 }
1190
1191 static void wl18xx_convert_fw_status(struct wl1271 *wl, void *raw_fw_status,
1192                                      struct wl_fw_status *fw_status)
1193 {
1194         struct wl18xx_fw_status *int_fw_status = raw_fw_status;
1195
1196         fw_status->intr = le32_to_cpu(int_fw_status->intr);
1197         fw_status->fw_rx_counter = int_fw_status->fw_rx_counter;
1198         fw_status->drv_rx_counter = int_fw_status->drv_rx_counter;
1199         fw_status->tx_results_counter = int_fw_status->tx_results_counter;
1200         fw_status->rx_pkt_descs = int_fw_status->rx_pkt_descs;
1201
1202         fw_status->fw_localtime = le32_to_cpu(int_fw_status->fw_localtime);
1203         fw_status->link_ps_bitmap = le32_to_cpu(int_fw_status->link_ps_bitmap);
1204         fw_status->link_fast_bitmap =
1205                         le32_to_cpu(int_fw_status->link_fast_bitmap);
1206         fw_status->total_released_blks =
1207                         le32_to_cpu(int_fw_status->total_released_blks);
1208         fw_status->tx_total = le32_to_cpu(int_fw_status->tx_total);
1209
1210         fw_status->counters.tx_released_pkts =
1211                         int_fw_status->counters.tx_released_pkts;
1212         fw_status->counters.tx_lnk_free_pkts =
1213                         int_fw_status->counters.tx_lnk_free_pkts;
1214         fw_status->counters.tx_voice_released_blks =
1215                         int_fw_status->counters.tx_voice_released_blks;
1216         fw_status->counters.tx_last_rate =
1217                         int_fw_status->counters.tx_last_rate;
1218         fw_status->counters.tx_last_rate_mbps =
1219                         int_fw_status->counters.tx_last_rate_mbps;
1220         fw_status->counters.hlid =
1221                         int_fw_status->counters.hlid;
1222
1223         fw_status->log_start_addr = le32_to_cpu(int_fw_status->log_start_addr);
1224
1225         fw_status->priv = &int_fw_status->priv;
1226 }
1227
1228 static void wl18xx_set_tx_desc_csum(struct wl1271 *wl,
1229                                     struct wl1271_tx_hw_descr *desc,
1230                                     struct sk_buff *skb)
1231 {
1232         u32 ip_hdr_offset;
1233         struct iphdr *ip_hdr;
1234
1235         if (!checksum_param) {
1236                 desc->wl18xx_checksum_data = 0;
1237                 return;
1238         }
1239
1240         if (skb->ip_summed != CHECKSUM_PARTIAL) {
1241                 desc->wl18xx_checksum_data = 0;
1242                 return;
1243         }
1244
1245         ip_hdr_offset = skb_network_header(skb) - skb_mac_header(skb);
1246         if (WARN_ON(ip_hdr_offset >= (1<<7))) {
1247                 desc->wl18xx_checksum_data = 0;
1248                 return;
1249         }
1250
1251         desc->wl18xx_checksum_data = ip_hdr_offset << 1;
1252
1253         /* FW is interested only in the LSB of the protocol  TCP=0 UDP=1 */
1254         ip_hdr = (void *)skb_network_header(skb);
1255         desc->wl18xx_checksum_data |= (ip_hdr->protocol & 0x01);
1256 }
1257
1258 static void wl18xx_set_rx_csum(struct wl1271 *wl,
1259                                struct wl1271_rx_descriptor *desc,
1260                                struct sk_buff *skb)
1261 {
1262         if (desc->status & WL18XX_RX_CHECKSUM_MASK)
1263                 skb->ip_summed = CHECKSUM_UNNECESSARY;
1264 }
1265
1266 static bool wl18xx_is_mimo_supported(struct wl1271 *wl)
1267 {
1268         struct wl18xx_priv *priv = wl->priv;
1269
1270         /* only support MIMO with multiple antennas, and when SISO
1271          * is not forced through config
1272          */
1273         return (priv->conf.phy.number_of_assembled_ant2_4 >= 2) &&
1274                (priv->conf.ht.mode != HT_MODE_WIDE) &&
1275                (priv->conf.ht.mode != HT_MODE_SISO20);
1276 }
1277
1278 /*
1279  * TODO: instead of having these two functions to get the rate mask,
1280  * we should modify the wlvif->rate_set instead
1281  */
1282 static u32 wl18xx_sta_get_ap_rate_mask(struct wl1271 *wl,
1283                                        struct wl12xx_vif *wlvif)
1284 {
1285         u32 hw_rate_set = wlvif->rate_set;
1286
1287         if (wlvif->channel_type == NL80211_CHAN_HT40MINUS ||
1288             wlvif->channel_type == NL80211_CHAN_HT40PLUS) {
1289                 wl1271_debug(DEBUG_ACX, "using wide channel rate mask");
1290                 hw_rate_set |= CONF_TX_RATE_USE_WIDE_CHAN;
1291
1292                 /* we don't support MIMO in wide-channel mode */
1293                 hw_rate_set &= ~CONF_TX_MIMO_RATES;
1294         } else if (wl18xx_is_mimo_supported(wl)) {
1295                 wl1271_debug(DEBUG_ACX, "using MIMO channel rate mask");
1296                 hw_rate_set |= CONF_TX_MIMO_RATES;
1297         }
1298
1299         return hw_rate_set;
1300 }
1301
1302 static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl,
1303                                              struct wl12xx_vif *wlvif)
1304 {
1305         if (wlvif->channel_type == NL80211_CHAN_HT40MINUS ||
1306             wlvif->channel_type == NL80211_CHAN_HT40PLUS) {
1307                 wl1271_debug(DEBUG_ACX, "using wide channel rate mask");
1308
1309                 /* sanity check - we don't support this */
1310                 if (WARN_ON(wlvif->band != NL80211_BAND_5GHZ))
1311                         return 0;
1312
1313                 return CONF_TX_RATE_USE_WIDE_CHAN;
1314         } else if (wl18xx_is_mimo_supported(wl) &&
1315                    wlvif->band == NL80211_BAND_2GHZ) {
1316                 wl1271_debug(DEBUG_ACX, "using MIMO rate mask");
1317                 /*
1318                  * we don't care about HT channel here - if a peer doesn't
1319                  * support MIMO, we won't enable it in its rates
1320                  */
1321                 return CONF_TX_MIMO_RATES;
1322         } else {
1323                 return 0;
1324         }
1325 }
1326
1327 static const char *wl18xx_rdl_name(enum wl18xx_rdl_num rdl_num)
1328 {
1329         switch (rdl_num) {
1330         case RDL_1_HP:
1331                 return "183xH";
1332         case RDL_2_SP:
1333                 return "183x or 180x";
1334         case RDL_3_HP:
1335                 return "187xH";
1336         case RDL_4_SP:
1337                 return "187x";
1338         case RDL_5_SP:
1339                 return "RDL11 - Not Supported";
1340         case RDL_6_SP:
1341                 return "180xD";
1342         case RDL_7_SP:
1343                 return "RDL13 - Not Supported (1893Q)";
1344         case RDL_8_SP:
1345                 return "18xxQ";
1346         case RDL_NONE:
1347                 return "UNTRIMMED";
1348         default:
1349                 return "UNKNOWN";
1350         }
1351 }
1352
1353 static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
1354 {
1355         u32 fuse;
1356         s8 rom = 0, metal = 0, pg_ver = 0, rdl_ver = 0, package_type = 0;
1357         int ret;
1358
1359         ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
1360         if (ret < 0)
1361                 goto out;
1362
1363         ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_2_3, &fuse);
1364         if (ret < 0)
1365                 goto out;
1366
1367         package_type = (fuse >> WL18XX_PACKAGE_TYPE_OFFSET) & 1;
1368
1369         ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_1_3, &fuse);
1370         if (ret < 0)
1371                 goto out;
1372
1373         pg_ver = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET;
1374         rom = (fuse & WL18XX_ROM_VER_MASK) >> WL18XX_ROM_VER_OFFSET;
1375
1376         if ((rom <= 0xE) && (package_type == WL18XX_PACKAGE_TYPE_WSP))
1377                 metal = (fuse & WL18XX_METAL_VER_MASK) >>
1378                         WL18XX_METAL_VER_OFFSET;
1379         else
1380                 metal = (fuse & WL18XX_NEW_METAL_VER_MASK) >>
1381                         WL18XX_NEW_METAL_VER_OFFSET;
1382
1383         ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_2_3, &fuse);
1384         if (ret < 0)
1385                 goto out;
1386
1387         rdl_ver = (fuse & WL18XX_RDL_VER_MASK) >> WL18XX_RDL_VER_OFFSET;
1388
1389         wl1271_info("wl18xx HW: %s, PG %d.%d (ROM 0x%x)",
1390                     wl18xx_rdl_name(rdl_ver), pg_ver, metal, rom);
1391
1392         if (ver)
1393                 *ver = pg_ver;
1394
1395         ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
1396
1397 out:
1398         return ret;
1399 }
1400
1401 static int wl18xx_load_conf_file(struct device *dev, struct wlcore_conf *conf,
1402                                  struct wl18xx_priv_conf *priv_conf,
1403                                  const char *file)
1404 {
1405         struct wlcore_conf_file *conf_file;
1406         const struct firmware *fw;
1407         int ret;
1408
1409         ret = reject_firmware(&fw, file, dev);
1410         if (ret < 0) {
1411                 wl1271_error("could not get configuration binary %s: %d",
1412                              file, ret);
1413                 return ret;
1414         }
1415
1416         if (fw->size != WL18XX_CONF_SIZE) {
1417                 wl1271_error("%s configuration binary size is wrong, expected %zu got %zu",
1418                              file, WL18XX_CONF_SIZE, fw->size);
1419                 ret = -EINVAL;
1420                 goto out_release;
1421         }
1422
1423         conf_file = (struct wlcore_conf_file *) fw->data;
1424
1425         if (conf_file->header.magic != cpu_to_le32(WL18XX_CONF_MAGIC)) {
1426                 wl1271_error("configuration binary file magic number mismatch, "
1427                              "expected 0x%0x got 0x%0x", WL18XX_CONF_MAGIC,
1428                              conf_file->header.magic);
1429                 ret = -EINVAL;
1430                 goto out_release;
1431         }
1432
1433         if (conf_file->header.version != cpu_to_le32(WL18XX_CONF_VERSION)) {
1434                 wl1271_error("configuration binary file version not supported, "
1435                              "expected 0x%08x got 0x%08x",
1436                              WL18XX_CONF_VERSION, conf_file->header.version);
1437                 ret = -EINVAL;
1438                 goto out_release;
1439         }
1440
1441         memcpy(conf, &conf_file->core, sizeof(*conf));
1442         memcpy(priv_conf, &conf_file->priv, sizeof(*priv_conf));
1443
1444 out_release:
1445         release_firmware(fw);
1446         return ret;
1447 }
1448
1449 static int wl18xx_conf_init(struct wl1271 *wl, struct device *dev)
1450 {
1451         struct platform_device *pdev = wl->pdev;
1452         struct wlcore_platdev_data *pdata = dev_get_platdata(&pdev->dev);
1453         struct wl18xx_priv *priv = wl->priv;
1454
1455         if (wl18xx_load_conf_file(dev, &wl->conf, &priv->conf,
1456                                   pdata->family->cfg_name) < 0) {
1457                 wl1271_warning("falling back to default config");
1458
1459                 /* apply driver default configuration */
1460                 memcpy(&wl->conf, &wl18xx_conf, sizeof(wl->conf));
1461                 /* apply default private configuration */
1462                 memcpy(&priv->conf, &wl18xx_default_priv_conf,
1463                        sizeof(priv->conf));
1464         }
1465
1466         return 0;
1467 }
1468
1469 static int wl18xx_plt_init(struct wl1271 *wl)
1470 {
1471         int ret;
1472
1473         /* calibrator based auto/fem detect not supported for 18xx */
1474         if (wl->plt_mode == PLT_FEM_DETECT) {
1475                 wl1271_error("wl18xx_plt_init: PLT FEM_DETECT not supported");
1476                 return -EINVAL;
1477         }
1478
1479         ret = wlcore_write32(wl, WL18XX_SCR_PAD8, WL18XX_SCR_PAD8_PLT);
1480         if (ret < 0)
1481                 return ret;
1482
1483         return wl->ops->boot(wl);
1484 }
1485
1486 static int wl18xx_get_mac(struct wl1271 *wl)
1487 {
1488         u32 mac1, mac2;
1489         int ret;
1490
1491         ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
1492         if (ret < 0)
1493                 goto out;
1494
1495         ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_1, &mac1);
1496         if (ret < 0)
1497                 goto out;
1498
1499         ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_2, &mac2);
1500         if (ret < 0)
1501                 goto out;
1502
1503         /* these are the two parts of the BD_ADDR */
1504         wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) +
1505                 ((mac1 & 0xff000000) >> 24);
1506         wl->fuse_nic_addr = (mac1 & 0xffffff);
1507
1508         if (!wl->fuse_oui_addr && !wl->fuse_nic_addr) {
1509                 u8 mac[ETH_ALEN];
1510
1511                 eth_random_addr(mac);
1512
1513                 wl->fuse_oui_addr = (mac[0] << 16) + (mac[1] << 8) + mac[2];
1514                 wl->fuse_nic_addr = (mac[3] << 16) + (mac[4] << 8) + mac[5];
1515                 wl1271_warning("MAC address from fuse not available, using random locally administered addresses.");
1516         }
1517
1518         ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
1519
1520 out:
1521         return ret;
1522 }
1523
1524 static int wl18xx_handle_static_data(struct wl1271 *wl,
1525                                      struct wl1271_static_data *static_data)
1526 {
1527         struct wl18xx_static_data_priv *static_data_priv =
1528                 (struct wl18xx_static_data_priv *) static_data->priv;
1529
1530         strncpy(wl->chip.phy_fw_ver_str, static_data_priv->phy_version,
1531                 sizeof(wl->chip.phy_fw_ver_str));
1532
1533         /* make sure the string is NULL-terminated */
1534         wl->chip.phy_fw_ver_str[sizeof(wl->chip.phy_fw_ver_str) - 1] = '\0';
1535
1536         wl1271_info("PHY firmware version: %s", static_data_priv->phy_version);
1537
1538         return 0;
1539 }
1540
1541 static int wl18xx_get_spare_blocks(struct wl1271 *wl, bool is_gem)
1542 {
1543         struct wl18xx_priv *priv = wl->priv;
1544
1545         /* If we have keys requiring extra spare, indulge them */
1546         if (priv->extra_spare_key_count)
1547                 return WL18XX_TX_HW_EXTRA_BLOCK_SPARE;
1548
1549         return WL18XX_TX_HW_BLOCK_SPARE;
1550 }
1551
1552 static int wl18xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
1553                           struct ieee80211_vif *vif,
1554                           struct ieee80211_sta *sta,
1555                           struct ieee80211_key_conf *key_conf)
1556 {
1557         struct wl18xx_priv *priv = wl->priv;
1558         bool change_spare = false, special_enc;
1559         int ret;
1560
1561         wl1271_debug(DEBUG_CRYPT, "extra spare keys before: %d",
1562                      priv->extra_spare_key_count);
1563
1564         special_enc = key_conf->cipher == WL1271_CIPHER_SUITE_GEM ||
1565                       key_conf->cipher == WLAN_CIPHER_SUITE_TKIP;
1566
1567         ret = wlcore_set_key(wl, cmd, vif, sta, key_conf);
1568         if (ret < 0)
1569                 goto out;
1570
1571         /*
1572          * when adding the first or removing the last GEM/TKIP key,
1573          * we have to adjust the number of spare blocks.
1574          */
1575         if (special_enc) {
1576                 if (cmd == SET_KEY) {
1577                         /* first key */
1578                         change_spare = (priv->extra_spare_key_count == 0);
1579                         priv->extra_spare_key_count++;
1580                 } else if (cmd == DISABLE_KEY) {
1581                         /* last key */
1582                         change_spare = (priv->extra_spare_key_count == 1);
1583                         priv->extra_spare_key_count--;
1584                 }
1585         }
1586
1587         wl1271_debug(DEBUG_CRYPT, "extra spare keys after: %d",
1588                      priv->extra_spare_key_count);
1589
1590         if (!change_spare)
1591                 goto out;
1592
1593         /* key is now set, change the spare blocks */
1594         if (priv->extra_spare_key_count)
1595                 ret = wl18xx_set_host_cfg_bitmap(wl,
1596                                         WL18XX_TX_HW_EXTRA_BLOCK_SPARE);
1597         else
1598                 ret = wl18xx_set_host_cfg_bitmap(wl,
1599                                         WL18XX_TX_HW_BLOCK_SPARE);
1600
1601 out:
1602         return ret;
1603 }
1604
1605 static u32 wl18xx_pre_pkt_send(struct wl1271 *wl,
1606                                u32 buf_offset, u32 last_len)
1607 {
1608         if (wl->quirks & WLCORE_QUIRK_TX_PAD_LAST_FRAME) {
1609                 struct wl1271_tx_hw_descr *last_desc;
1610
1611                 /* get the last TX HW descriptor written to the aggr buf */
1612                 last_desc = (struct wl1271_tx_hw_descr *)(wl->aggr_buf +
1613                                                         buf_offset - last_len);
1614
1615                 /* the last frame is padded up to an SDIO block */
1616                 last_desc->wl18xx_mem.ctrl &= ~WL18XX_TX_CTRL_NOT_PADDED;
1617                 return ALIGN(buf_offset, WL12XX_BUS_BLOCK_SIZE);
1618         }
1619
1620         /* no modifications */
1621         return buf_offset;
1622 }
1623
1624 static void wl18xx_sta_rc_update(struct wl1271 *wl,
1625                                  struct wl12xx_vif *wlvif)
1626 {
1627         bool wide = wlvif->rc_update_bw >= IEEE80211_STA_RX_BW_40;
1628
1629         wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide);
1630
1631         /* sanity */
1632         if (WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS))
1633                 return;
1634
1635         /* ignore the change before association */
1636         if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags))
1637                 return;
1638
1639         /*
1640          * If we started out as wide, we can change the operation mode. If we
1641          * thought this was a 20mhz AP, we have to reconnect
1642          */
1643         if (wlvif->sta.role_chan_type == NL80211_CHAN_HT40MINUS ||
1644             wlvif->sta.role_chan_type == NL80211_CHAN_HT40PLUS)
1645                 wl18xx_acx_peer_ht_operation_mode(wl, wlvif->sta.hlid, wide);
1646         else
1647                 ieee80211_connection_loss(wl12xx_wlvif_to_vif(wlvif));
1648 }
1649
1650 static int wl18xx_set_peer_cap(struct wl1271 *wl,
1651                                struct ieee80211_sta_ht_cap *ht_cap,
1652                                bool allow_ht_operation,
1653                                u32 rate_set, u8 hlid)
1654 {
1655         return wl18xx_acx_set_peer_cap(wl, ht_cap, allow_ht_operation,
1656                                        rate_set, hlid);
1657 }
1658
1659 static bool wl18xx_lnk_high_prio(struct wl1271 *wl, u8 hlid,
1660                                  struct wl1271_link *lnk)
1661 {
1662         u8 thold;
1663         struct wl18xx_fw_status_priv *status_priv =
1664                 (struct wl18xx_fw_status_priv *)wl->fw_status->priv;
1665         unsigned long suspend_bitmap;
1666
1667         /* if we don't have the link map yet, assume they all low prio */
1668         if (!status_priv)
1669                 return false;
1670
1671         /* suspended links are never high priority */
1672         suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap);
1673         if (test_bit(hlid, &suspend_bitmap))
1674                 return false;
1675
1676         /* the priority thresholds are taken from FW */
1677         if (test_bit(hlid, &wl->fw_fast_lnk_map) &&
1678             !test_bit(hlid, &wl->ap_fw_ps_map))
1679                 thold = status_priv->tx_fast_link_prio_threshold;
1680         else
1681                 thold = status_priv->tx_slow_link_prio_threshold;
1682
1683         return lnk->allocated_pkts < thold;
1684 }
1685
1686 static bool wl18xx_lnk_low_prio(struct wl1271 *wl, u8 hlid,
1687                                 struct wl1271_link *lnk)
1688 {
1689         u8 thold;
1690         struct wl18xx_fw_status_priv *status_priv =
1691                 (struct wl18xx_fw_status_priv *)wl->fw_status->priv;
1692         unsigned long suspend_bitmap;
1693
1694         /* if we don't have the link map yet, assume they all low prio */
1695         if (!status_priv)
1696                 return true;
1697
1698         suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap);
1699         if (test_bit(hlid, &suspend_bitmap))
1700                 thold = status_priv->tx_suspend_threshold;
1701         else if (test_bit(hlid, &wl->fw_fast_lnk_map) &&
1702                  !test_bit(hlid, &wl->ap_fw_ps_map))
1703                 thold = status_priv->tx_fast_stop_threshold;
1704         else
1705                 thold = status_priv->tx_slow_stop_threshold;
1706
1707         return lnk->allocated_pkts < thold;
1708 }
1709
1710 static u32 wl18xx_convert_hwaddr(struct wl1271 *wl, u32 hwaddr)
1711 {
1712         return hwaddr & ~0x80000000;
1713 }
1714
1715 static int wl18xx_setup(struct wl1271 *wl);
1716
1717 static struct wlcore_ops wl18xx_ops = {
1718         .setup          = wl18xx_setup,
1719         .identify_chip  = wl18xx_identify_chip,
1720         .boot           = wl18xx_boot,
1721         .plt_init       = wl18xx_plt_init,
1722         .trigger_cmd    = wl18xx_trigger_cmd,
1723         .ack_event      = wl18xx_ack_event,
1724         .wait_for_event = wl18xx_wait_for_event,
1725         .process_mailbox_events = wl18xx_process_mailbox_events,
1726         .calc_tx_blocks = wl18xx_calc_tx_blocks,
1727         .set_tx_desc_blocks = wl18xx_set_tx_desc_blocks,
1728         .set_tx_desc_data_len = wl18xx_set_tx_desc_data_len,
1729         .get_rx_buf_align = wl18xx_get_rx_buf_align,
1730         .get_rx_packet_len = wl18xx_get_rx_packet_len,
1731         .tx_immediate_compl = wl18xx_tx_immediate_completion,
1732         .tx_delayed_compl = NULL,
1733         .hw_init        = wl18xx_hw_init,
1734         .convert_fw_status = wl18xx_convert_fw_status,
1735         .set_tx_desc_csum = wl18xx_set_tx_desc_csum,
1736         .get_pg_ver     = wl18xx_get_pg_ver,
1737         .set_rx_csum = wl18xx_set_rx_csum,
1738         .sta_get_ap_rate_mask = wl18xx_sta_get_ap_rate_mask,
1739         .ap_get_mimo_wide_rate_mask = wl18xx_ap_get_mimo_wide_rate_mask,
1740         .get_mac        = wl18xx_get_mac,
1741         .debugfs_init   = wl18xx_debugfs_add_files,
1742         .scan_start     = wl18xx_scan_start,
1743         .scan_stop      = wl18xx_scan_stop,
1744         .sched_scan_start       = wl18xx_sched_scan_start,
1745         .sched_scan_stop        = wl18xx_scan_sched_scan_stop,
1746         .handle_static_data     = wl18xx_handle_static_data,
1747         .get_spare_blocks = wl18xx_get_spare_blocks,
1748         .set_key        = wl18xx_set_key,
1749         .channel_switch = wl18xx_cmd_channel_switch,
1750         .pre_pkt_send   = wl18xx_pre_pkt_send,
1751         .sta_rc_update  = wl18xx_sta_rc_update,
1752         .set_peer_cap   = wl18xx_set_peer_cap,
1753         .convert_hwaddr = wl18xx_convert_hwaddr,
1754         .lnk_high_prio  = wl18xx_lnk_high_prio,
1755         .lnk_low_prio   = wl18xx_lnk_low_prio,
1756         .smart_config_start = wl18xx_cmd_smart_config_start,
1757         .smart_config_stop  = wl18xx_cmd_smart_config_stop,
1758         .smart_config_set_group_key = wl18xx_cmd_smart_config_set_group_key,
1759         .interrupt_notify = wl18xx_acx_interrupt_notify_config,
1760         .rx_ba_filter   = wl18xx_acx_rx_ba_filter,
1761         .ap_sleep       = wl18xx_acx_ap_sleep,
1762         .set_cac        = wl18xx_cmd_set_cac,
1763         .dfs_master_restart     = wl18xx_cmd_dfs_master_restart,
1764 };
1765
1766 /* HT cap appropriate for wide channels in 2Ghz */
1767 static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = {
1768         .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 |
1769                IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40 |
1770                IEEE80211_HT_CAP_GRN_FLD,
1771         .ht_supported = true,
1772         .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
1773         .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
1774         .mcs = {
1775                 .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
1776                 .rx_highest = cpu_to_le16(150),
1777                 .tx_params = IEEE80211_HT_MCS_TX_DEFINED,
1778                 },
1779 };
1780
1781 /* HT cap appropriate for wide channels in 5Ghz */
1782 static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = {
1783         .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 |
1784                IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
1785                IEEE80211_HT_CAP_GRN_FLD,
1786         .ht_supported = true,
1787         .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
1788         .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
1789         .mcs = {
1790                 .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
1791                 .rx_highest = cpu_to_le16(150),
1792                 .tx_params = IEEE80211_HT_MCS_TX_DEFINED,
1793                 },
1794 };
1795
1796 /* HT cap appropriate for SISO 20 */
1797 static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = {
1798         .cap = IEEE80211_HT_CAP_SGI_20 |
1799                IEEE80211_HT_CAP_GRN_FLD,
1800         .ht_supported = true,
1801         .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
1802         .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
1803         .mcs = {
1804                 .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
1805                 .rx_highest = cpu_to_le16(72),
1806                 .tx_params = IEEE80211_HT_MCS_TX_DEFINED,
1807                 },
1808 };
1809
1810 /* HT cap appropriate for MIMO rates in 20mhz channel */
1811 static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_2ghz = {
1812         .cap = IEEE80211_HT_CAP_SGI_20 |
1813                IEEE80211_HT_CAP_GRN_FLD,
1814         .ht_supported = true,
1815         .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
1816         .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
1817         .mcs = {
1818                 .rx_mask = { 0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0, },
1819                 .rx_highest = cpu_to_le16(144),
1820                 .tx_params = IEEE80211_HT_MCS_TX_DEFINED,
1821                 },
1822 };
1823
1824 static const struct ieee80211_iface_limit wl18xx_iface_limits[] = {
1825         {
1826                 .max = 2,
1827                 .types = BIT(NL80211_IFTYPE_STATION),
1828         },
1829         {
1830                 .max = 1,
1831                 .types =   BIT(NL80211_IFTYPE_AP)
1832                          | BIT(NL80211_IFTYPE_P2P_GO)
1833                          | BIT(NL80211_IFTYPE_P2P_CLIENT)
1834 #ifdef CONFIG_MAC80211_MESH
1835                          | BIT(NL80211_IFTYPE_MESH_POINT)
1836 #endif
1837         },
1838         {
1839                 .max = 1,
1840                 .types = BIT(NL80211_IFTYPE_P2P_DEVICE),
1841         },
1842 };
1843
1844 static const struct ieee80211_iface_limit wl18xx_iface_ap_limits[] = {
1845         {
1846                 .max = 2,
1847                 .types = BIT(NL80211_IFTYPE_AP),
1848         },
1849 #ifdef CONFIG_MAC80211_MESH
1850         {
1851                 .max = 1,
1852                 .types = BIT(NL80211_IFTYPE_MESH_POINT),
1853         },
1854 #endif
1855         {
1856                 .max = 1,
1857                 .types = BIT(NL80211_IFTYPE_P2P_DEVICE),
1858         },
1859 };
1860
1861 static const struct ieee80211_iface_limit wl18xx_iface_ap_cl_limits[] = {
1862         {
1863                 .max = 1,
1864                 .types = BIT(NL80211_IFTYPE_STATION),
1865         },
1866         {
1867                 .max = 1,
1868                 .types = BIT(NL80211_IFTYPE_AP),
1869         },
1870         {
1871                 .max = 1,
1872                 .types = BIT(NL80211_IFTYPE_P2P_CLIENT),
1873         },
1874         {
1875                 .max = 1,
1876                 .types = BIT(NL80211_IFTYPE_P2P_DEVICE),
1877         },
1878 };
1879
1880 static const struct ieee80211_iface_limit wl18xx_iface_ap_go_limits[] = {
1881         {
1882                 .max = 1,
1883                 .types = BIT(NL80211_IFTYPE_STATION),
1884         },
1885         {
1886                 .max = 1,
1887                 .types = BIT(NL80211_IFTYPE_AP),
1888         },
1889         {
1890                 .max = 1,
1891                 .types = BIT(NL80211_IFTYPE_P2P_GO),
1892         },
1893         {
1894                 .max = 1,
1895                 .types = BIT(NL80211_IFTYPE_P2P_DEVICE),
1896         },
1897 };
1898
1899 static const struct ieee80211_iface_combination
1900 wl18xx_iface_combinations[] = {
1901         {
1902                 .max_interfaces = 3,
1903                 .limits = wl18xx_iface_limits,
1904                 .n_limits = ARRAY_SIZE(wl18xx_iface_limits),
1905                 .num_different_channels = 2,
1906         },
1907         {
1908                 .max_interfaces = 2,
1909                 .limits = wl18xx_iface_ap_limits,
1910                 .n_limits = ARRAY_SIZE(wl18xx_iface_ap_limits),
1911                 .num_different_channels = 1,
1912                 .radar_detect_widths =  BIT(NL80211_CHAN_NO_HT) |
1913                                         BIT(NL80211_CHAN_HT20) |
1914                                         BIT(NL80211_CHAN_HT40MINUS) |
1915                                         BIT(NL80211_CHAN_HT40PLUS),
1916         }
1917 };
1918
1919 static int wl18xx_setup(struct wl1271 *wl)
1920 {
1921         struct wl18xx_priv *priv = wl->priv;
1922         int ret;
1923
1924         BUILD_BUG_ON(WL18XX_MAX_LINKS > WLCORE_MAX_LINKS);
1925         BUILD_BUG_ON(WL18XX_MAX_AP_STATIONS > WL18XX_MAX_LINKS);
1926         BUILD_BUG_ON(WL18XX_CONF_SG_PARAMS_MAX > WLCORE_CONF_SG_PARAMS_MAX);
1927
1928         wl->rtable = wl18xx_rtable;
1929         wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS;
1930         wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS;
1931         wl->num_links = WL18XX_MAX_LINKS;
1932         wl->max_ap_stations = WL18XX_MAX_AP_STATIONS;
1933         wl->iface_combinations = wl18xx_iface_combinations;
1934         wl->n_iface_combinations = ARRAY_SIZE(wl18xx_iface_combinations);
1935         wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES;
1936         wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
1937         wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX;
1938         wl->hw_min_ht_rate = WL18XX_CONF_HW_RXTX_RATE_MCS0;
1939         wl->fw_status_len = sizeof(struct wl18xx_fw_status);
1940         wl->fw_status_priv_len = sizeof(struct wl18xx_fw_status_priv);
1941         wl->stats.fw_stats_len = sizeof(struct wl18xx_acx_statistics);
1942         wl->static_data_priv_len = sizeof(struct wl18xx_static_data_priv);
1943
1944         if (num_rx_desc_param != -1)
1945                 wl->num_rx_desc = num_rx_desc_param;
1946
1947         ret = wl18xx_conf_init(wl, wl->dev);
1948         if (ret < 0)
1949                 return ret;
1950
1951         /* If the module param is set, update it in conf */
1952         if (board_type_param) {
1953                 if (!strcmp(board_type_param, "fpga")) {
1954                         priv->conf.phy.board_type = BOARD_TYPE_FPGA_18XX;
1955                 } else if (!strcmp(board_type_param, "hdk")) {
1956                         priv->conf.phy.board_type = BOARD_TYPE_HDK_18XX;
1957                 } else if (!strcmp(board_type_param, "dvp")) {
1958                         priv->conf.phy.board_type = BOARD_TYPE_DVP_18XX;
1959                 } else if (!strcmp(board_type_param, "evb")) {
1960                         priv->conf.phy.board_type = BOARD_TYPE_EVB_18XX;
1961                 } else if (!strcmp(board_type_param, "com8")) {
1962                         priv->conf.phy.board_type = BOARD_TYPE_COM8_18XX;
1963                 } else {
1964                         wl1271_error("invalid board type '%s'",
1965                                 board_type_param);
1966                         return -EINVAL;
1967                 }
1968         }
1969
1970         if (priv->conf.phy.board_type >= NUM_BOARD_TYPES) {
1971                 wl1271_error("invalid board type '%d'",
1972                         priv->conf.phy.board_type);
1973                 return -EINVAL;
1974         }
1975
1976         if (low_band_component_param != -1)
1977                 priv->conf.phy.low_band_component = low_band_component_param;
1978         if (low_band_component_type_param != -1)
1979                 priv->conf.phy.low_band_component_type =
1980                         low_band_component_type_param;
1981         if (high_band_component_param != -1)
1982                 priv->conf.phy.high_band_component = high_band_component_param;
1983         if (high_band_component_type_param != -1)
1984                 priv->conf.phy.high_band_component_type =
1985                         high_band_component_type_param;
1986         if (pwr_limit_reference_11_abg_param != -1)
1987                 priv->conf.phy.pwr_limit_reference_11_abg =
1988                         pwr_limit_reference_11_abg_param;
1989         if (n_antennas_2_param != -1)
1990                 priv->conf.phy.number_of_assembled_ant2_4 = n_antennas_2_param;
1991         if (n_antennas_5_param != -1)
1992                 priv->conf.phy.number_of_assembled_ant5 = n_antennas_5_param;
1993         if (dc2dc_param != -1)
1994                 priv->conf.phy.external_pa_dc2dc = dc2dc_param;
1995
1996         if (ht_mode_param) {
1997                 if (!strcmp(ht_mode_param, "default"))
1998                         priv->conf.ht.mode = HT_MODE_DEFAULT;
1999                 else if (!strcmp(ht_mode_param, "wide"))
2000                         priv->conf.ht.mode = HT_MODE_WIDE;
2001                 else if (!strcmp(ht_mode_param, "siso20"))
2002                         priv->conf.ht.mode = HT_MODE_SISO20;
2003                 else {
2004                         wl1271_error("invalid ht_mode '%s'", ht_mode_param);
2005                         return -EINVAL;
2006                 }
2007         }
2008
2009         if (priv->conf.ht.mode == HT_MODE_DEFAULT) {
2010                 /*
2011                  * Only support mimo with multiple antennas. Fall back to
2012                  * siso40.
2013                  */
2014                 if (wl18xx_is_mimo_supported(wl))
2015                         wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ,
2016                                           &wl18xx_mimo_ht_cap_2ghz);
2017                 else
2018                         wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ,
2019                                           &wl18xx_siso40_ht_cap_2ghz);
2020
2021                 /* 5Ghz is always wide */
2022                 wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ,
2023                                   &wl18xx_siso40_ht_cap_5ghz);
2024         } else if (priv->conf.ht.mode == HT_MODE_WIDE) {
2025                 wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ,
2026                                   &wl18xx_siso40_ht_cap_2ghz);
2027                 wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ,
2028                                   &wl18xx_siso40_ht_cap_5ghz);
2029         } else if (priv->conf.ht.mode == HT_MODE_SISO20) {
2030                 wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ,
2031                                   &wl18xx_siso20_ht_cap);
2032                 wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ,
2033                                   &wl18xx_siso20_ht_cap);
2034         }
2035
2036         if (!checksum_param) {
2037                 wl18xx_ops.set_rx_csum = NULL;
2038                 wl18xx_ops.init_vif = NULL;
2039         }
2040
2041         /* Enable 11a Band only if we have 5G antennas */
2042         wl->enable_11a = (priv->conf.phy.number_of_assembled_ant5 != 0);
2043
2044         return 0;
2045 }
2046
2047 static int wl18xx_probe(struct platform_device *pdev)
2048 {
2049         struct wl1271 *wl;
2050         struct ieee80211_hw *hw;
2051         int ret;
2052
2053         hw = wlcore_alloc_hw(sizeof(struct wl18xx_priv),
2054                              WL18XX_AGGR_BUFFER_SIZE,
2055                              sizeof(struct wl18xx_event_mailbox));
2056         if (IS_ERR(hw)) {
2057                 wl1271_error("can't allocate hw");
2058                 ret = PTR_ERR(hw);
2059                 goto out;
2060         }
2061
2062         wl = hw->priv;
2063         wl->ops = &wl18xx_ops;
2064         wl->ptable = wl18xx_ptable;
2065         ret = wlcore_probe(wl, pdev);
2066         if (ret)
2067                 goto out_free;
2068
2069         return ret;
2070
2071 out_free:
2072         wlcore_free_hw(wl);
2073 out:
2074         return ret;
2075 }
2076
2077 static const struct platform_device_id wl18xx_id_table[] = {
2078         { "wl18xx", 0 },
2079         {  } /* Terminating Entry */
2080 };
2081 MODULE_DEVICE_TABLE(platform, wl18xx_id_table);
2082
2083 static struct platform_driver wl18xx_driver = {
2084         .probe          = wl18xx_probe,
2085         .remove         = wlcore_remove,
2086         .id_table       = wl18xx_id_table,
2087         .driver = {
2088                 .name   = "wl18xx_driver",
2089         }
2090 };
2091
2092 module_platform_driver(wl18xx_driver);
2093 module_param_named(ht_mode, ht_mode_param, charp, S_IRUSR);
2094 MODULE_PARM_DESC(ht_mode, "Force HT mode: wide or siso20");
2095
2096 module_param_named(board_type, board_type_param, charp, S_IRUSR);
2097 MODULE_PARM_DESC(board_type, "Board type: fpga, hdk (default), evb, com8 or "
2098                  "dvp");
2099
2100 module_param_named(checksum, checksum_param, bool, S_IRUSR);
2101 MODULE_PARM_DESC(checksum, "Enable TCP checksum: boolean (defaults to false)");
2102
2103 module_param_named(dc2dc, dc2dc_param, int, S_IRUSR);
2104 MODULE_PARM_DESC(dc2dc, "External DC2DC: u8 (defaults to 0)");
2105
2106 module_param_named(n_antennas_2, n_antennas_2_param, int, S_IRUSR);
2107 MODULE_PARM_DESC(n_antennas_2,
2108                  "Number of installed 2.4GHz antennas: 1 (default) or 2");
2109
2110 module_param_named(n_antennas_5, n_antennas_5_param, int, S_IRUSR);
2111 MODULE_PARM_DESC(n_antennas_5,
2112                  "Number of installed 5GHz antennas: 1 (default) or 2");
2113
2114 module_param_named(low_band_component, low_band_component_param, int,
2115                    S_IRUSR);
2116 MODULE_PARM_DESC(low_band_component, "Low band component: u8 "
2117                  "(default is 0x01)");
2118
2119 module_param_named(low_band_component_type, low_band_component_type_param,
2120                    int, S_IRUSR);
2121 MODULE_PARM_DESC(low_band_component_type, "Low band component type: u8 "
2122                  "(default is 0x05 or 0x06 depending on the board_type)");
2123
2124 module_param_named(high_band_component, high_band_component_param, int,
2125                    S_IRUSR);
2126 MODULE_PARM_DESC(high_band_component, "High band component: u8, "
2127                  "(default is 0x01)");
2128
2129 module_param_named(high_band_component_type, high_band_component_type_param,
2130                    int, S_IRUSR);
2131 MODULE_PARM_DESC(high_band_component_type, "High band component type: u8 "
2132                  "(default is 0x09)");
2133
2134 module_param_named(pwr_limit_reference_11_abg,
2135                    pwr_limit_reference_11_abg_param, int, S_IRUSR);
2136 MODULE_PARM_DESC(pwr_limit_reference_11_abg, "Power limit reference: u8 "
2137                  "(default is 0xc8)");
2138
2139 module_param_named(num_rx_desc,
2140                    num_rx_desc_param, int, S_IRUSR);
2141 MODULE_PARM_DESC(num_rx_desc_param,
2142                  "Number of Rx descriptors: u8 (default is 32)");
2143
2144 MODULE_LICENSE("GPL v2");
2145 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
2146 /*(DEBLOBBED)*/