1 /* SPDX-License-Identifier: GPL-2.0 */
3 * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
10 #include <linux/netdevice.h>
13 /********************************************
15 * Wlan Configuration ID
17 ********************************************/
20 WILC_FW_BSS_TYPE_INFRA = 0,
21 WILC_FW_BSS_TYPE_INDEPENDENT,
26 WILC_FW_OPER_MODE_B_ONLY = 0, /* 1, 2 M, otherwise 5, 11 M */
27 WILC_FW_OPER_MODE_G_ONLY, /* 6,12,24 otherwise 9,18,36,48,54 */
28 WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */
29 WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */
33 WILC_FW_PREAMBLE_SHORT = 0, /* Short Preamble */
34 WILC_FW_PREAMBLE_LONG = 1, /* Long Preamble */
35 WILC_FW_PREAMBLE_AUTO = 2, /* Auto Preamble Selection */
39 WILC_FW_PASSIVE_SCAN = 0,
40 WILC_FW_ACTIVE_SCAN = 1,
44 WILC_FW_NO_POWERSAVE = 0,
45 WILC_FW_MIN_FAST_PS = 1,
46 WILC_FW_MAX_FAST_PS = 2,
47 WILC_FW_MIN_PSPOLL_PS = 3,
48 WILC_FW_MAX_PSPOLL_PS = 4
52 WILC_BUS_ACQUIRE_ONLY = 0,
53 WILC_BUS_ACQUIRE_AND_WAKEUP = 1,
57 WILC_BUS_RELEASE_ONLY = 0,
58 WILC_BUS_RELEASE_ALLOW_SLEEP = 1,
62 WILC_FW_NO_ENCRYPT = 0,
63 WILC_FW_ENCRYPT_ENABLED = BIT(0),
65 WILC_FW_WEP_EXTENDED = BIT(2),
67 WILC_FW_WPA2 = BIT(4),
73 WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT,
74 WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED,
75 WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP,
76 WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED,
77 WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA,
78 WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA,
79 WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED,
80 WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2,
81 WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2
85 WILC_FW_AUTH_OPEN_SYSTEM = 1,
86 WILC_FW_AUTH_SHARED_KEY = 2,
88 WILC_FW_AUTH_IEEE8021 = 5
92 WILC_FW_SITE_SURVEY_1CH = 0,
93 WILC_FW_SITE_SURVEY_ALL_CH = 1,
94 WILC_FW_SITE_SURVEY_OFF = 2
98 WILC_FW_ACK_POLICY_NORMAL = 0,
99 WILC_FW_ACK_NO_POLICY,
103 WILC_FW_REKEY_POLICY_DISABLE = 1,
104 WILC_FW_REKEY_POLICY_TIME_BASE,
105 WILC_FW_REKEY_POLICY_PKT_BASE,
106 WILC_FW_REKEY_POLICY_TIME_PKT_BASE
110 WILC_FW_FILTER_NO = 0x00,
111 WILC_FW_FILTER_AP_ONLY = 0x01,
112 WILC_FW_FILTER_STA_ONLY = 0x02
116 WILC_FW_11N_PROT_AUTO = 0, /* Auto */
117 WILC_FW_11N_NO_PROT, /* Do not use any protection */
118 WILC_FW_11N_PROT_ERP, /* Protect all ERP frame exchanges */
119 WILC_FW_11N_PROT_HT, /* Protect all HT frame exchanges */
120 WILC_FW_11N_PROT_GF /* Protect all GF frame exchanges */
124 WILC_FW_ERP_PROT_SELF_CTS,
125 WILC_FW_ERP_PROT_RTS_CTS,
129 WILC_FW_11N_OP_MODE_HT_MIXED = 1,
130 WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ,
131 WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ,
135 WILC_FW_OBBS_NONHT_NO_DETECT = 0,
136 WILC_FW_OBBS_NONHT_DETECT_ONLY = 1,
137 WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2,
138 WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3,
142 WILC_FW_HT_PROT_RTS_CTS_NONHT = 0, /* RTS-CTS at non-HT rate */
143 WILC_FW_HT_PROT_FIRST_FRAME_NONHT, /* First frame at non-HT rate */
144 WILC_FW_HT_PROT_LSIG_TXOP, /* LSIG TXOP Protection */
145 WILC_FW_HT_PROT_FIRST_FRAME_MIXED, /* First frame at Mixed format */
149 WILC_FW_SMPS_MODE_STATIC = 1,
150 WILC_FW_SMPS_MODE_DYNAMIC = 2,
151 WILC_FW_SMPS_MODE_MIMO = 3, /* power save disable */
155 WILC_FW_TX_RATE_AUTO = 0,
156 WILC_FW_TX_RATE_MBPS_1 = 1,
157 WILC_FW_TX_RATE_MBPS_2 = 2,
158 WILC_FW_TX_RATE_MBPS_5_5 = 5,
159 WILC_FW_TX_RATE_MBPS_11 = 11,
160 WILC_FW_TX_RATE_MBPS_6 = 6,
161 WILC_FW_TX_RATE_MBPS_9 = 9,
162 WILC_FW_TX_RATE_MBPS_12 = 12,
163 WILC_FW_TX_RATE_MBPS_18 = 18,
164 WILC_FW_TX_RATE_MBPS_24 = 24,
165 WILC_FW_TX_RATE_MBPS_36 = 36,
166 WILC_FW_TX_RATE_MBPS_48 = 48,
167 WILC_FW_TX_RATE_MBPS_54 = 54
171 WILC_FW_DEFAULT_SCAN = 0,
172 WILC_FW_USER_SCAN = BIT(0),
173 WILC_FW_OBSS_PERIODIC_SCAN = BIT(1),
174 WILC_FW_OBSS_ONETIME_SCAN = BIT(2)
178 WILC_FW_ACTION_FRM_IDX = 0,
179 WILC_FW_PROBE_REQ_IDX = 1
203 * -----------------------------------------------------------
204 * Configuration : Infrastructure Independent Access Point
205 * Values to set : 0 1 2
206 * -----------------------------------------------------------
208 WID_BSS_TYPE = 0x0000,
212 * -----------------------------------------------------------
213 * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54
214 * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54
215 * -----------------------------------------------------------
217 WID_CURRENT_TX_RATE = 0x0001,
221 * -----------------------------------------------------------
222 * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14
223 * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14
224 * -----------------------------------------------------------
226 WID_CURRENT_CHANNEL = 0x0002,
230 * -----------------------------------------------------------
231 * Configuration : short long Auto
232 * Values to set : 0 1 2
233 * -----------------------------------------------------------
235 WID_PREAMBLE = 0x0003,
238 * 11g operating mode (ignored if 11g not present)
239 * -----------------------------------------------------------
240 * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2)
241 * Values to set : 1 2 3
242 * -----------------------------------------------------------
244 WID_11G_OPERATING_MODE = 0x0004,
247 * Mac status (response only)
248 * -----------------------------------------------------------
249 * Configuration : disconnect connect
250 * Values to get : 0 1
251 * -----------------------------------------------------------
257 * -----------------------------------------------------------
258 * Configuration : Passive Scanning Active Scanning
259 * Values to set : 0 1
260 * -----------------------------------------------------------
262 WID_SCAN_TYPE = 0x0007,
265 * Key Id (WEP default key Id)
266 * -----------------------------------------------------------
267 * Configuration : Any value between 0 to 3
268 * Values to set : Same value. Default is 0
269 * -----------------------------------------------------------
275 * -----------------------------------------------------------
276 * Configuration : QoS Disable WMM Enable
277 * Values to set : 0 1
278 * -----------------------------------------------------------
280 WID_QOS_ENABLE = 0x000A,
284 * -----------------------------------------------------------
285 * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
286 * Values to set : 0 1 2
287 * -----------------------------------------------------------
289 WID_POWER_MANAGEMENT = 0x000B,
292 * WEP/802 11I Configuration
293 * -----------------------------------------------------------
294 * Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
295 * Values (0x) : 00 03 07 29 49 31 51
296 * Configuration:WPA-AES+TKIP RSN-AES+TKIP
297 * Values (0x) : 69 71
298 * -----------------------------------------------------------
300 WID_11I_MODE = 0x000C,
303 * WEP Configuration: Used in BSS STA mode only when WEP is enabled
304 * -----------------------------------------------------------
305 * Configuration : Open System Shared Key Any Type | 802.1x Auth
306 * Values (0x) : 01 02 03 | BIT2
307 * -----------------------------------------------------------
309 WID_AUTH_TYPE = 0x000D,
313 * -----------------------------------------------------------
314 * Configuration : Values to set
315 * Survey 1 Channel : 0
316 * survey all Channels : 1
317 * Disable Site Survey : 2
318 * -----------------------------------------------------------
320 WID_SITE_SURVEY = 0x000E,
324 * -----------------------------------------------------------
325 * Configuration : Any value between 1 to 255
326 * Values to set : Same value. Default is 3
327 * -----------------------------------------------------------
329 WID_LISTEN_INTERVAL = 0x000F,
333 * -----------------------------------------------------------
334 * Configuration : Any value between 1 to 255
335 * Values to set : Same value. Default is 3
336 * -----------------------------------------------------------
338 WID_DTIM_PERIOD = 0x0010,
342 * -----------------------------------------------------------
343 * Configuration : Normal Ack No Ack
344 * Values to set : 0 1
345 * -----------------------------------------------------------
347 WID_ACK_POLICY = 0x0011,
350 * Reset MAC (Set only)
351 * -----------------------------------------------------------
352 * Configuration : Don't Reset Reset No Request
353 * Values to set : 0 1 2
354 * -----------------------------------------------------------
359 * Broadcast SSID Option: Setting this will adhere to "" SSID element
360 * -----------------------------------------------------------
361 * Configuration : Enable Disable
362 * Values to set : 1 0
363 * -----------------------------------------------------------
365 WID_BCAST_SSID = 0x0015,
368 * Disconnect (Station)
369 * -----------------------------------------------------------
370 * Configuration : Association ID
371 * Values to set : Association ID
372 * -----------------------------------------------------------
374 WID_DISCONNECT = 0x0016,
378 * -----------------------------------------------------------
379 * Configuration : Sets TX Power (Higher the value greater the power)
380 * Values to set : Any value between 0 and 63 (inclusive Default 48)
381 * -----------------------------------------------------------
383 WID_TX_POWER_LEVEL_11A = 0x0018,
386 * Group Key Update Policy Selection
387 * -----------------------------------------------------------
388 * Configuration : Disabled timeBased packetBased timePacketBased
389 * Values to set : 1 2 3 4
390 * -----------------------------------------------------------
392 WID_REKEY_POLICY = 0x0019,
396 * -----------------------------------------------------------
397 * Configuration : Disallow Short Slot Allow Short Slot
398 * (Enable Only Long Slot) (Enable Short Slot if applicable)
399 * Values to set : 0 1
400 * -----------------------------------------------------------
402 WID_SHORT_SLOT_ALLOWED = 0x001A,
404 WID_PHY_ACTIVE_REG = 0x001B,
408 * -----------------------------------------------------------
409 * Configuration : Sets TX Power (Higher the value greater the power)
410 * Values to set : Any value between 0 and 63 (inclusive Default 48)
411 * -----------------------------------------------------------
413 WID_TX_POWER_LEVEL_11B = 0x001D,
417 * -----------------------------------------------------------
418 * Configuration : Request default scan
420 * -----------------------------------------------------------
422 WID_START_SCAN_REQ = 0x001E,
426 * -----------------------------------------------------------
428 * Values to get : Rssi value
429 * -----------------------------------------------------------
435 * -----------------------------------------------------------
436 * Configuration : Request to join
437 * Values to set : index of scan result
438 * -----------------------------------------------------------
440 WID_JOIN_REQ = 0x0020,
442 WID_LINKSPEED = 0x0026,
445 * Enable User Control of TX Power
446 * -----------------------------------------------------------
447 * Configuration : Disable Enable
448 * Values to set : 0 1
449 * -----------------------------------------------------------
451 WID_USER_CONTROL_ON_TX_POWER = 0x0027,
453 WID_MEMORY_ACCESS_8BIT = 0x0029,
456 * Enable Auto RX Sensitivity feature
457 * -----------------------------------------------------------
458 * Configuration : Disable Enable
459 * Values to set : 0 1
460 * -----------------------------------------------------------
462 WID_AUTO_RX_SENSITIVITY = 0x0032,
465 * Receive Buffer Based Ack
466 * -----------------------------------------------------------
467 * Configuration : Disable Enable
468 * Values to set : 0 1
469 * -----------------------------------------------------------
471 WID_DATAFLOW_CONTROL = 0x0033,
475 * -----------------------------------------------------------
476 * Configuration : Class No filter AP only Station Only
477 * Values to set : 0 1 2
478 * Configuration : Priority High Rssi Low Rssi Detect
479 * Values to set : 0 0x4 0x0
480 * Configuration : Channel filter off filter on
481 * Values to set : 0 0x10
482 * -----------------------------------------------------------
484 WID_SCAN_FILTER = 0x0036,
487 * Link Loss Threshold (measure in the beacon period)
488 * -----------------------------------------------------------
489 * Configuration : Any value between 10 and 254(Set to 255 disable)
490 * Values to set : Same value. Default is 10
491 * -----------------------------------------------------------
493 WID_LINK_LOSS_THRESHOLD = 0x0037,
495 WID_ABORT_RUNNING_SCAN = 0x003E,
497 /* NMAC Character WID list */
498 WID_WPS_START = 0x0043,
501 * Protection mode for MAC
502 * -----------------------------------------------------------
503 * Configuration : Auto No protection ERP HT GF
504 * Values to set : 0 1 2 3 4
505 * -----------------------------------------------------------
507 WID_11N_PROT_MECH = 0x0080,
510 * ERP Protection type for MAC
511 * -----------------------------------------------------------
512 * Configuration : Self-CTS RTS-CTS
513 * Values to set : 0 1
514 * -----------------------------------------------------------
516 WID_11N_ERP_PROT_TYPE = 0x0081,
520 * -----------------------------------------------------------
521 * Configuration : HT Enable HT Disable
522 * Values to set : 1 0
523 * -----------------------------------------------------------
525 WID_11N_ENABLE = 0x0082,
528 * 11n Operating mode (Note that 11g operating mode will also be
529 * used in addition to this, if this is set to HT Mixed mode)
530 * -----------------------------------------------------------
531 * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz
532 * Values to set : 1 2 3
533 * -----------------------------------------------------------
535 WID_11N_OPERATING_MODE = 0x0083,
538 * 11n OBSS non-HT STA Detection flag
539 * -----------------------------------------------------------
540 * Configuration : Do not detect
542 * Configuration : Detect, do not protect or report
544 * Configuration : Detect, protect and do not report
546 * Configuration : Detect, protect and report to other BSS
548 * -----------------------------------------------------------
550 WID_11N_OBSS_NONHT_DETECTION = 0x0084,
553 * 11n HT Protection Type
554 * -----------------------------------------------------------
555 * Configuration : RTS-CTS First Frame Exchange at non-HT-rate
556 * Values to set : 0 1
557 * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt
558 * Values to set : 2 3
559 * -----------------------------------------------------------
561 WID_11N_HT_PROT_TYPE = 0x0085,
564 * 11n RIFS Protection Enable Flag
565 * -----------------------------------------------------------
566 * Configuration : Disable Enable
567 * Values to set : 0 1
568 * -----------------------------------------------------------
570 WID_11N_RIFS_PROT_ENABLE = 0x0086,
574 * -----------------------------------------------------------
575 * Configuration : Static Dynamic MIMO (Power Save Disabled)
576 * Values to set : 1 2 3
577 * -----------------------------------------------------------
579 WID_11N_SMPS_MODE = 0x0087,
582 * Current transmit MCS
583 * -----------------------------------------------------------
584 * Configuration : MCS Index for data rate
585 * Values to set : 0 to 7
586 * -----------------------------------------------------------
588 WID_11N_CURRENT_TX_MCS = 0x0088,
590 WID_11N_PRINT_STATS = 0x0089,
593 * 11n Short GI Enable Flag
594 * -----------------------------------------------------------
595 * Configuration : Disable Enable
596 * Values to set : 0 1
597 * -----------------------------------------------------------
599 WID_11N_SHORT_GI_ENABLE = 0x008D,
602 * 11n RIFS Enable Flag
603 * -----------------------------------------------------------
604 * Configuration : Disable Enable
605 * Values to set : 0 1
606 * -----------------------------------------------------------
608 WID_RIFS_MODE = 0x0094,
612 * -----------------------------------------------------------
613 * Configuration : Disable Self CTS Enable Self CTS
614 * Values to set : 0 1
615 * Configuration : Disable TX Abort Enable TX Abort
616 * Values to set : 2 3
617 * Configuration : Enable HW TX Abort Enable SW TX Abort
618 * Values to set : 4 5
619 * -----------------------------------------------------------
621 WID_TX_ABORT_CONFIG = 0x00A1,
623 WID_REG_TSSI_11B_VALUE = 0x00A6,
624 WID_REG_TSSI_11G_VALUE = 0x00A7,
625 WID_REG_TSSI_11N_VALUE = 0x00A8,
626 WID_TX_CALIBRATION = 0x00A9,
627 WID_DSCR_TSSI_11B_VALUE = 0x00AA,
628 WID_DSCR_TSSI_11G_VALUE = 0x00AB,
629 WID_DSCR_TSSI_11N_VALUE = 0x00AC,
632 * Immediate Block-Ack Support
633 * -----------------------------------------------------------
634 * Configuration : Disable Enable
635 * Values to set : 0 1
636 * -----------------------------------------------------------
638 WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF,
642 * -----------------------------------------------------------
643 * Configuration : Disable Enable
644 * Values to set : 1 0
645 * -----------------------------------------------------------
647 WID_11N_TXOP_PROT_DISABLE = 0x00B0,
649 WID_TX_POWER_LEVEL_11N = 0x00B1,
651 /* Custom Character WID list */
652 /* SCAN Complete notification WID*/
653 WID_SCAN_COMPLETE = 0x00C9,
655 WID_DEL_BEACON = 0x00CA,
657 WID_LOG_TERMINAL_SWITCH = 0x00CD,
658 WID_TX_POWER = 0x00CE,
659 WID_WOWLAN_TRIGGER = 0X00CF,
660 /* EMAC Short WID list */
663 * -----------------------------------------------------------
664 * Configuration : Any value between 256 to 2347
665 * Values to set : Same value. Default is 2347
666 * -----------------------------------------------------------
668 WID_RTS_THRESHOLD = 0x1000,
671 * Fragmentation Threshold
672 * -----------------------------------------------------------
673 * Configuration : Any value between 256 to 2346
674 * Values to set : Same value. Default is 2346
675 * -----------------------------------------------------------
677 WID_FRAG_THRESHOLD = 0x1001,
679 WID_SHORT_RETRY_LIMIT = 0x1002,
680 WID_LONG_RETRY_LIMIT = 0x1003,
681 WID_BEACON_INTERVAL = 0x1006,
682 WID_MEMORY_ACCESS_16BIT = 0x1008,
683 WID_PASSIVE_SCAN_TIME = 0x100D,
684 WID_JOIN_START_TIMEOUT = 0x100F,
685 WID_ASOC_TIMEOUT = 0x1011,
686 WID_11I_PROTOCOL_TIMEOUT = 0x1012,
687 WID_EAPOL_RESPONSE_TIMEOUT = 0x1013,
689 /* NMAC Short WID list */
690 WID_11N_SIG_QUAL_VAL = 0x1085,
691 WID_CCA_THRESHOLD = 0x1087,
693 /* Custom Short WID list */
695 /* EMAC Integer WID list */
696 WID_FAILED_COUNT = 0x2000,
697 WID_RETRY_COUNT = 0x2001,
698 WID_MULTIPLE_RETRY_COUNT = 0x2002,
699 WID_FRAME_DUPLICATE_COUNT = 0x2003,
700 WID_ACK_FAILURE_COUNT = 0x2004,
701 WID_RECEIVED_FRAGMENT_COUNT = 0x2005,
702 WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006,
703 WID_FCS_ERROR_COUNT = 0x2007,
704 WID_SUCCESS_FRAME_COUNT = 0x2008,
705 WID_HUT_TX_COUNT = 0x200A,
706 WID_TX_FRAGMENT_COUNT = 0x200B,
707 WID_TX_MULTICAST_FRAME_COUNT = 0x200C,
708 WID_RTS_SUCCESS_COUNT = 0x200D,
709 WID_RTS_FAILURE_COUNT = 0x200E,
710 WID_WEP_UNDECRYPTABLE_COUNT = 0x200F,
711 WID_REKEY_PERIOD = 0x2010,
712 WID_REKEY_PACKET_COUNT = 0x2011,
713 WID_1X_SERV_ADDR = 0x2012,
714 WID_STACK_IP_ADDR = 0x2013,
715 WID_STACK_NETMASK_ADDR = 0x2014,
716 WID_HW_RX_COUNT = 0x2015,
717 WID_MEMORY_ADDRESS = 0x201E,
718 WID_MEMORY_ACCESS_32BIT = 0x201F,
720 /* NMAC Integer WID list */
721 /* Custom Integer WID list */
722 WID_GET_INACTIVE_TIME = 0x2084,
723 /* EMAC String WID list */
725 WID_FIRMWARE_VERSION = 0x3001,
726 WID_OPERATIONAL_RATE_SET = 0x3002,
728 WID_WEP_KEY_VALUE = 0x3004,
729 WID_11I_PSK = 0x3008,
730 WID_11E_P_ACTION_REQ = 0x3009,
732 WID_HARDWARE_VERSION = 0x300B,
733 WID_MAC_ADDR = 0x300C,
734 WID_HUT_DEST_ADDR = 0x300D,
735 WID_PHY_VERSION = 0x300F,
736 WID_SUPP_USERNAME = 0x3010,
737 WID_SUPP_PASSWORD = 0x3011,
738 WID_SITE_SURVEY_RESULTS = 0x3012,
739 WID_RX_POWER_LEVEL = 0x3013,
740 WID_SET_STA_MAC_INACTIVE_TIME = 0x3017,
741 WID_ADD_WEP_KEY = 0x3019,
742 WID_REMOVE_WEP_KEY = 0x301A,
743 WID_ADD_PTK = 0x301B,
744 WID_ADD_RX_GTK = 0x301C,
745 WID_ADD_TX_GTK = 0x301D,
746 WID_REMOVE_KEY = 0x301E,
747 WID_ASSOC_REQ_INFO = 0x301F,
748 WID_ASSOC_RES_INFO = 0x3020,
749 WID_MANUFACTURER = 0x3026, /* Added for CAPI tool */
750 WID_MODEL_NAME = 0x3027, /* Added for CAPI tool */
751 WID_MODEL_NUM = 0x3028, /* Added for CAPI tool */
752 WID_DEVICE_NAME = 0x3029, /* Added for CAPI tool */
754 /* NMAC String WID list */
755 WID_SET_OPERATION_MODE = 0x3079,
756 WID_11N_P_ACTION_REQ = 0x3080,
757 WID_HUT_TEST_ID = 0x3081,
758 WID_PMKID_INFO = 0x3082,
759 WID_FIRMWARE_INFO = 0x3083,
760 WID_REGISTER_FRAME = 0x3084,
761 WID_DEL_ALL_STA = 0x3085,
762 WID_REMAIN_ON_CHAN = 0x3996,
763 WID_SSID_PROBE_REQ = 0x3997,
764 WID_JOIN_REQ_EXTENDED = 0x3998,
766 WID_IP_ADDRESS = 0x3999,
768 /* Custom String WID list */
770 /* EMAC Binary WID list */
771 WID_UAPSD_CONFIG = 0x4001,
772 WID_UAPSD_STATUS = 0x4002,
773 WID_WMM_AP_AC_PARAMS = 0x4003,
774 WID_WMM_STA_AC_PARAMS = 0x4004,
775 WID_NETWORK_INFO = 0x4005,
776 WID_STA_JOIN_INFO = 0x4006,
777 WID_CONNECTED_STA_LIST = 0x4007,
779 /* NMAC Binary WID list */
780 WID_11N_AUTORATE_TABLE = 0x4080,
782 WID_SCAN_CHANNEL_LIST = 0x4084,
784 WID_INFO_ELEMENT_PROBE = 0x4085,
785 WID_INFO_ELEMENT_ASSOCIATE = 0x4086,
786 WID_ADD_STA = 0X4087,
787 WID_REMOVE_STA = 0X4088,
788 WID_EDIT_STA = 0X4089,
789 WID_ADD_BEACON = 0x408a,
791 WID_SETUP_MULTICAST_FILTER = 0x408b,
793 /* Miscellaneous WIDs */