drivers/net/wireless/microchip/wilc1000/wlan_if.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
   4  * All rights reserved.
   5  */
   6
   7 #ifndef WILC_WLAN_IF_H
   8 #define WILC_WLAN_IF_H
   9
  10 #include <linux/netdevice.h>
  11 #include "fw.h"
  12
  13 #define WILC_MAX_ASSOC_RESP_FRAME_SIZE 512
  14
  15 /********************************************
  16  *
  17  *      Wlan Configuration ID
  18  *
  19  ********************************************/
  20
  21 enum bss_types {
  22         WILC_FW_BSS_TYPE_INFRA = 0,
  23         WILC_FW_BSS_TYPE_INDEPENDENT,
  24         WILC_FW_BSS_TYPE_AP,
  25 };
  26
  27 enum {
  28         WILC_FW_OPER_MODE_B_ONLY = 0,    /* 1, 2 M, otherwise 5, 11 M */
  29         WILC_FW_OPER_MODE_G_ONLY,        /* 6,12,24 otherwise 9,18,36,48,54 */
  30         WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */
  31         WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */
  32 };
  33
  34 enum {
  35         WILC_FW_PREAMBLE_SHORT = 0,     /* Short Preamble */
  36         WILC_FW_PREAMBLE_LONG = 1,      /* Long Preamble */
  37         WILC_FW_PREAMBLE_AUTO = 2,      /* Auto Preamble Selection */
  38 };
  39
  40 enum {
  41         WILC_FW_PASSIVE_SCAN = 0,
  42         WILC_FW_ACTIVE_SCAN = 1,
  43 };
  44
  45 enum {
  46         WILC_FW_NO_POWERSAVE = 0,
  47         WILC_FW_MIN_FAST_PS = 1,
  48         WILC_FW_MAX_FAST_PS = 2,
  49         WILC_FW_MIN_PSPOLL_PS = 3,
  50         WILC_FW_MAX_PSPOLL_PS = 4
  51 };
  52
  53 enum bus_acquire {
  54         WILC_BUS_ACQUIRE_ONLY = 0,
  55         WILC_BUS_ACQUIRE_AND_WAKEUP = 1,
  56 };
  57
  58 enum bus_release {
  59         WILC_BUS_RELEASE_ONLY = 0,
  60         WILC_BUS_RELEASE_ALLOW_SLEEP = 1,
  61 };
  62
  63 enum {
  64         WILC_FW_NO_ENCRYPT = 0,
  65         WILC_FW_ENCRYPT_ENABLED = BIT(0),
  66         WILC_FW_WEP = BIT(1),
  67         WILC_FW_WEP_EXTENDED = BIT(2),
  68         WILC_FW_WPA = BIT(3),
  69         WILC_FW_WPA2 = BIT(4),
  70         WILC_FW_AES = BIT(5),
  71         WILC_FW_TKIP = BIT(6)
  72 };
  73
  74 enum {
  75         WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT,
  76         WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED,
  77         WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP,
  78         WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED,
  79         WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA,
  80         WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA,
  81         WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED,
  82         WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2,
  83         WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2
  84 };
  85
  86 enum authtype {
  87         WILC_FW_AUTH_OPEN_SYSTEM = 1,
  88         WILC_FW_AUTH_SHARED_KEY = 2,
  89         WILC_FW_AUTH_ANY = 3,
  90         WILC_FW_AUTH_IEEE8021 = 5,
  91         WILC_FW_AUTH_SAE = 7,
  92         WILC_FW_AUTH_IEE8021X_SHA256 = 9,
  93         WILC_FW_AUTH_OPEN_SYSTEM_SHA256 = 13
  94 };
  95
  96 enum mfptype {
  97         WILC_FW_MFP_NONE = 0x0,
  98         WILC_FW_MFP_OPTIONAL = 0x1,
  99         WILC_FW_MFP_REQUIRED = 0x2
 100 };
 101
 102 enum site_survey {
 103         WILC_FW_SITE_SURVEY_1CH = 0,
 104         WILC_FW_SITE_SURVEY_ALL_CH = 1,
 105         WILC_FW_SITE_SURVEY_OFF = 2
 106 };
 107
 108 enum {
 109         WILC_FW_ACK_POLICY_NORMAL = 0,
 110         WILC_FW_ACK_NO_POLICY,
 111 };
 112
 113 enum {
 114         WILC_FW_REKEY_POLICY_DISABLE = 1,
 115         WILC_FW_REKEY_POLICY_TIME_BASE,
 116         WILC_FW_REKEY_POLICY_PKT_BASE,
 117         WILC_FW_REKEY_POLICY_TIME_PKT_BASE
 118 };
 119
 120 enum {
 121         WILC_FW_FILTER_NO = 0x00,
 122         WILC_FW_FILTER_AP_ONLY = 0x01,
 123         WILC_FW_FILTER_STA_ONLY = 0x02
 124 };
 125
 126 enum {
 127         WILC_FW_11N_PROT_AUTO = 0,      /* Auto */
 128         WILC_FW_11N_NO_PROT,            /* Do not use any protection */
 129         WILC_FW_11N_PROT_ERP,           /* Protect all ERP frame exchanges */
 130         WILC_FW_11N_PROT_HT,            /* Protect all HT frame exchanges  */
 131         WILC_FW_11N_PROT_GF             /* Protect all GF frame exchanges  */
 132 };
 133
 134 enum {
 135         WILC_FW_ERP_PROT_SELF_CTS,
 136         WILC_FW_ERP_PROT_RTS_CTS,
 137 };
 138
 139 enum {
 140         WILC_FW_11N_OP_MODE_HT_MIXED = 1,
 141         WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ,
 142         WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ,
 143 };
 144
 145 enum {
 146         WILC_FW_OBBS_NONHT_NO_DETECT = 0,
 147         WILC_FW_OBBS_NONHT_DETECT_ONLY = 1,
 148         WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2,
 149         WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3,
 150 };
 151
 152 enum {
 153         WILC_FW_HT_PROT_RTS_CTS_NONHT = 0,  /* RTS-CTS at non-HT rate */
 154         WILC_FW_HT_PROT_FIRST_FRAME_NONHT,  /* First frame at non-HT rate */
 155         WILC_FW_HT_PROT_LSIG_TXOP,          /* LSIG TXOP Protection */
 156         WILC_FW_HT_PROT_FIRST_FRAME_MIXED,  /* First frame at Mixed format */
 157 };
 158
 159 enum {
 160         WILC_FW_SMPS_MODE_STATIC = 1,
 161         WILC_FW_SMPS_MODE_DYNAMIC = 2,
 162         WILC_FW_SMPS_MODE_MIMO = 3,     /* power save disable */
 163 };
 164
 165 enum {
 166         WILC_FW_TX_RATE_AUTO = 0,
 167         WILC_FW_TX_RATE_MBPS_1 = 1,
 168         WILC_FW_TX_RATE_MBPS_2 = 2,
 169         WILC_FW_TX_RATE_MBPS_5_5 = 5,
 170         WILC_FW_TX_RATE_MBPS_11 = 11,
 171         WILC_FW_TX_RATE_MBPS_6 = 6,
 172         WILC_FW_TX_RATE_MBPS_9 = 9,
 173         WILC_FW_TX_RATE_MBPS_12 = 12,
 174         WILC_FW_TX_RATE_MBPS_18 = 18,
 175         WILC_FW_TX_RATE_MBPS_24 = 24,
 176         WILC_FW_TX_RATE_MBPS_36 = 36,
 177         WILC_FW_TX_RATE_MBPS_48 = 48,
 178         WILC_FW_TX_RATE_MBPS_54 = 54
 179 };
 180
 181 enum {
 182         WILC_FW_DEFAULT_SCAN = 0,
 183         WILC_FW_USER_SCAN = BIT(0),
 184         WILC_FW_OBSS_PERIODIC_SCAN = BIT(1),
 185         WILC_FW_OBSS_ONETIME_SCAN = BIT(2)
 186 };
 187
 188 enum {
 189         WILC_FW_ACTION_FRM_IDX = 0,
 190         WILC_FW_PROBE_REQ_IDX = 1,
 191         WILC_FW_AUTH_REQ_IDX = 2
 192 };
 193
 194 enum wid_type {
 195         WID_CHAR                = 0,
 196         WID_SHORT               = 1,
 197         WID_INT                 = 2,
 198         WID_STR                 = 3,
 199         WID_BIN_DATA            = 4,
 200         WID_BIN                 = 5,
 201 };
 202
 203 struct wid {
 204         u16 id;
 205         enum wid_type type;
 206         s32 size;
 207         s8 *val;
 208 };
 209
 210 enum {
 211         WID_NIL                         = 0xffff,
 212
 213         /*
 214          *  BSS Type
 215          *  -----------------------------------------------------------
 216          *  Configuration : Infrastructure   Independent   Access Point
 217          *  Values to set :         0               1            2
 218          *  -----------------------------------------------------------
 219          */
 220         WID_BSS_TYPE                    = 0x0000,
 221
 222         /*
 223          *  Transmit Rate
 224          *  -----------------------------------------------------------
 225          *  Configuration : 1  2  5.5  11  6  9  12  18  24  36  48  54
 226          *  Values to set : 1  2    5  11  6  9  12  18  24  36  48  54
 227          *  -----------------------------------------------------------
 228          */
 229         WID_CURRENT_TX_RATE             = 0x0001,
 230
 231         /*
 232          *  Channel
 233          *  -----------------------------------------------------------
 234          *  Configuration(g) : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
 235          *  Values to set    : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
 236          *  -----------------------------------------------------------
 237          */
 238         WID_CURRENT_CHANNEL             = 0x0002,
 239
 240         /*
 241          *  Preamble
 242          *  -----------------------------------------------------------
 243          *  Configuration :    short    long      Auto
 244          *  Values to set :       0       1         2
 245          *  -----------------------------------------------------------
 246          */
 247         WID_PREAMBLE                    = 0x0003,
 248
 249         /*
 250          * 11g operating mode (ignored if 11g not present)
 251          *  -----------------------------------------------------------
 252          *  Configuration :   HighPerf  Compat(RSet #1) Compat(RSet #2)
 253          *  Values to set :          1               2               3
 254          *  -----------------------------------------------------------
 255          */
 256         WID_11G_OPERATING_MODE          = 0x0004,
 257
 258         /*
 259          *  Mac status (response only)
 260          *  -----------------------------------------------------------
 261          *  Configuration :   disconnect  connect
 262          *  Values to get :          0       1
 263          *  -----------------------------------------------------------
 264          */
 265         WID_STATUS                      = 0x0005,
 266
 267         /*
 268          *  Scan type
 269          *  -----------------------------------------------------------
 270          *  Configuration :   Passive Scanning   Active Scanning
 271          *  Values to set :                  0                 1
 272          *  -----------------------------------------------------------
 273          */
 274         WID_SCAN_TYPE                   = 0x0007,
 275
 276         /*
 277          *  Key Id (WEP default key Id)
 278          *  -----------------------------------------------------------
 279          *  Configuration :   Any value between 0 to 3
 280          *  Values to set :   Same value. Default is 0
 281          *  -----------------------------------------------------------
 282          */
 283         WID_KEY_ID                      = 0x0009,
 284
 285         /*
 286          *  QoS Enable
 287          *  -----------------------------------------------------------
 288          *  Configuration :   QoS Disable   WMM Enable
 289          *  Values to set :   0             1
 290          *  -----------------------------------------------------------
 291          */
 292         WID_QOS_ENABLE                  = 0x000A,
 293
 294         /*
 295          *  Power Management
 296          *  -----------------------------------------------------------
 297          *  Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
 298          *  Values to set : 0            1             2
 299          *  -----------------------------------------------------------
 300          */
 301         WID_POWER_MANAGEMENT            = 0x000B,
 302
 303         /*
 304          *  WEP/802 11I Configuration
 305          *  -----------------------------------------------------------
 306          *  Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
 307          *  Values (0x)  :   00     03   07     29       49       31      51
 308          *  Configuration:WPA-AES+TKIP RSN-AES+TKIP
 309          *  Values (0x)  :      69        71
 310          *  -----------------------------------------------------------
 311          */
 312         WID_11I_MODE                    = 0x000C,
 313
 314         /*
 315          *  WEP Configuration: Used in BSS STA mode only when WEP is enabled
 316          *  -----------------------------------------------------------
 317          *  Configuration : Open System Shared Key Any Type | 802.1x Auth
 318          *  Values (0x)   :    01             02         03 |    BIT2
 319          *  -----------------------------------------------------------
 320          */
 321         WID_AUTH_TYPE                   = 0x000D,
 322
 323         /*
 324          *  Site Survey Type
 325          *  -----------------------------------------------------------
 326          *  Configuration       :  Values to set
 327          *  Survey 1 Channel    :  0
 328          *  survey all Channels :  1
 329          *  Disable Site Survey :  2
 330          *  -----------------------------------------------------------
 331          */
 332         WID_SITE_SURVEY                 = 0x000E,
 333
 334         /*
 335          *  Listen Interval
 336          *  -----------------------------------------------------------
 337          *  Configuration :   Any value between 1 to 255
 338          *  Values to set :   Same value. Default is 3
 339          *  -----------------------------------------------------------
 340          */
 341         WID_LISTEN_INTERVAL             = 0x000F,
 342
 343         /*
 344          *  DTIM Period
 345          *  -----------------------------------------------------------
 346          *  Configuration :   Any value between 1 to 255
 347          *  Values to set :   Same value. Default is 3
 348          *  -----------------------------------------------------------
 349          */
 350         WID_DTIM_PERIOD                 = 0x0010,
 351
 352         /*
 353          *  ACK Policy
 354          *  -----------------------------------------------------------
 355          *  Configuration :   Normal Ack            No Ack
 356          *  Values to set :       0                   1
 357          *  -----------------------------------------------------------
 358          */
 359         WID_ACK_POLICY                  = 0x0011,
 360
 361         /*
 362          *  Reset MAC (Set only)
 363          *  -----------------------------------------------------------
 364          *  Configuration :   Don't Reset       Reset   No Request
 365          *  Values to set :       0               1         2
 366          *  -----------------------------------------------------------
 367          */
 368         WID_RESET                       = 0x0012,
 369
 370         /*
 371          *  Broadcast SSID Option: Setting this will adhere to "" SSID element
 372          *  -----------------------------------------------------------
 373          *  Configuration :   Enable             Disable
 374          *  Values to set :   1                  0
 375          *  -----------------------------------------------------------
 376          */
 377         WID_BCAST_SSID                  = 0x0015,
 378
 379         /*
 380          *  Disconnect (Station)
 381          *  -----------------------------------------------------------
 382          *  Configuration :   Association ID
 383          *  Values to set :   Association ID
 384          *  -----------------------------------------------------------
 385          */
 386         WID_DISCONNECT                  = 0x0016,
 387
 388         /*
 389          *  11a Tx Power Level
 390          *  -----------------------------------------------------------
 391          *  Configuration : Sets TX Power (Higher the value greater the power)
 392          *  Values to set : Any value between 0 and 63 (inclusive Default 48)
 393          *  -----------------------------------------------------------
 394          */
 395         WID_TX_POWER_LEVEL_11A          = 0x0018,
 396
 397         /*
 398          *  Group Key Update Policy Selection
 399          *  -----------------------------------------------------------
 400          *  Configuration : Disabled timeBased packetBased timePacketBased
 401          *  Values to set :   1            2          3              4
 402          *  -----------------------------------------------------------
 403          */
 404         WID_REKEY_POLICY                = 0x0019,
 405
 406         /*
 407          *  Allow Short Slot
 408          *  -----------------------------------------------------------
 409          *  Configuration : Disallow Short Slot      Allow Short Slot
 410          *          (Enable Only Long Slot) (Enable Short Slot if applicable)
 411          *  Values to set :    0         1
 412          *  -----------------------------------------------------------
 413          */
 414         WID_SHORT_SLOT_ALLOWED          = 0x001A,
 415
 416         WID_PHY_ACTIVE_REG              = 0x001B,
 417
 418         /*
 419          *  11b Tx Power Level
 420          *  -----------------------------------------------------------
 421          *  Configuration : Sets TX Power (Higher the value greater the power)
 422          *  Values to set : Any value between 0 and 63 (inclusive Default 48)
 423          *  -----------------------------------------------------------
 424          */
 425         WID_TX_POWER_LEVEL_11B          = 0x001D,
 426
 427         /*
 428          *  Scan Request
 429          *  -----------------------------------------------------------
 430          *  Configuration : Request default scan
 431          *  Values to set : 0
 432          *  -----------------------------------------------------------
 433          */
 434         WID_START_SCAN_REQ              = 0x001E,
 435
 436         /*
 437          *  Rssi (get only)
 438          *  -----------------------------------------------------------
 439          *  Configuration :
 440          *  Values to get : Rssi value
 441          *  -----------------------------------------------------------
 442          */
 443         WID_RSSI                        = 0x001F,
 444
 445         /*
 446          * Join Request
 447          *  -----------------------------------------------------------
 448          *  Configuration : Request to join
 449          *  Values to set : index of scan result
 450          *  -----------------------------------------------------------
 451          */
 452         WID_JOIN_REQ                    = 0x0020,
 453
 454         WID_LINKSPEED                   = 0x0026,
 455
 456         /*
 457          *  Enable User Control of TX Power
 458          *  -----------------------------------------------------------
 459          *  Configuration : Disable                  Enable
 460          *  Values to set :    0                       1
 461          *  -----------------------------------------------------------
 462          */
 463         WID_USER_CONTROL_ON_TX_POWER    = 0x0027,
 464
 465         WID_MEMORY_ACCESS_8BIT          = 0x0029,
 466
 467         /*
 468          *  Enable Auto RX Sensitivity feature
 469          *  -----------------------------------------------------------
 470          *  Configuration : Disable                  Enable
 471          *  Values to set :    0                       1
 472          *  -----------------------------------------------------------
 473          */
 474         WID_AUTO_RX_SENSITIVITY         = 0x0032,
 475
 476         /*
 477          *  Receive Buffer Based Ack
 478          *  -----------------------------------------------------------
 479          *  Configuration : Disable                  Enable
 480          *  Values to set :    0                       1
 481          *  -----------------------------------------------------------
 482          */
 483         WID_DATAFLOW_CONTROL            = 0x0033,
 484
 485         /*
 486          *  Scan Filter
 487          *  -----------------------------------------------------------
 488          *  Configuration : Class       No filter   AP only   Station Only
 489          *  Values to set :                0           1           2
 490          *  Configuration : Priority    High Rssi   Low Rssi     Detect
 491          *  Values to set :                0          0x4         0x0
 492          *  Configuration : Channel     filter off  filter on
 493          *  Values to set :                0          0x10
 494          *  -----------------------------------------------------------
 495          */
 496         WID_SCAN_FILTER                 = 0x0036,
 497
 498         /*
 499          *  Link Loss Threshold (measure in the beacon period)
 500          *  -----------------------------------------------------------
 501          *  Configuration : Any value between 10 and 254(Set to 255 disable)
 502          *  Values to set : Same value. Default is 10
 503          *  -----------------------------------------------------------
 504          */
 505         WID_LINK_LOSS_THRESHOLD         = 0x0037,
 506
 507         WID_ABORT_RUNNING_SCAN          = 0x003E,
 508
 509         /* NMAC Character WID list */
 510         WID_WPS_START                   = 0x0043,
 511
 512         /*
 513          *  Protection mode for MAC
 514          *  -----------------------------------------------------------
 515          *  Configuration :  Auto  No protection  ERP    HT    GF
 516          *  Values to set :  0     1              2      3     4
 517          *  -----------------------------------------------------------
 518          */
 519         WID_11N_PROT_MECH               = 0x0080,
 520
 521         /*
 522          *  ERP Protection type for MAC
 523          *  -----------------------------------------------------------
 524          *  Configuration :  Self-CTS   RTS-CTS
 525          *  Values to set :  0          1
 526          *  -----------------------------------------------------------
 527          */
 528         WID_11N_ERP_PROT_TYPE           = 0x0081,
 529
 530         /*
 531          *  HT Option Enable
 532          *  -----------------------------------------------------------
 533          *  Configuration :   HT Enable          HT Disable
 534          *  Values to set :   1                  0
 535          *  -----------------------------------------------------------
 536          */
 537         WID_11N_ENABLE                  = 0x0082,
 538
 539         /*
 540          *  11n Operating mode (Note that 11g operating mode will also be
 541          *  used in addition to this, if this is set to HT Mixed mode)
 542          *  -----------------------------------------------------------
 543          *   Configuration :  HT Mixed  HT Only-20MHz   HT Only-20/40MHz
 544          *  Values to set :     1         2               3
 545          *  -----------------------------------------------------------
 546          */
 547         WID_11N_OPERATING_MODE          = 0x0083,
 548
 549         /*
 550          *  11n OBSS non-HT STA Detection flag
 551          *  -----------------------------------------------------------
 552          *  Configuration :  Do not detect
 553          *  Values to set :  0
 554          *  Configuration :  Detect, do not protect or report
 555          *  Values to set :  1
 556          *  Configuration :  Detect, protect and do not report
 557          *  Values to set :  2
 558          *  Configuration :  Detect, protect and report to other BSS
 559          *  Values to set :  3
 560          *  -----------------------------------------------------------
 561          */
 562         WID_11N_OBSS_NONHT_DETECTION    = 0x0084,
 563
 564         /*
 565          *  11n HT Protection Type
 566          *  -----------------------------------------------------------
 567          *  Configuration :  RTS-CTS   First Frame Exchange at non-HT-rate
 568          *  Values to set :  0         1
 569          *  Configuration :  LSIG TXOP First Frame Exchange in Mixed Fmt
 570          *  Values to set :  2         3
 571          *  -----------------------------------------------------------
 572          */
 573         WID_11N_HT_PROT_TYPE            = 0x0085,
 574
 575         /*
 576          *  11n RIFS Protection Enable Flag
 577          *  -----------------------------------------------------------
 578          *  Configuration :  Disable    Enable
 579          *  Values to set :  0          1
 580          *  -----------------------------------------------------------
 581          */
 582         WID_11N_RIFS_PROT_ENABLE        = 0x0086,
 583
 584         /*
 585          *  SMPS Mode
 586          *  -----------------------------------------------------------
 587          *  Configuration :  Static   Dynamic   MIMO (Power Save Disabled)
 588          *  Values to set :  1        2         3
 589          *  -----------------------------------------------------------
 590          */
 591         WID_11N_SMPS_MODE               = 0x0087,
 592
 593         /*
 594          *  Current transmit MCS
 595          *  -----------------------------------------------------------
 596          *  Configuration :  MCS Index for data rate
 597          *  Values to set :  0 to 7
 598          *  -----------------------------------------------------------
 599          */
 600         WID_11N_CURRENT_TX_MCS          = 0x0088,
 601
 602         WID_11N_PRINT_STATS             = 0x0089,
 603
 604         /*
 605          *  11n Short GI Enable Flag
 606          *  -----------------------------------------------------------
 607          *  Configuration :  Disable    Enable
 608          *  Values to set :  0          1
 609          *  -----------------------------------------------------------
 610          */
 611         WID_11N_SHORT_GI_ENABLE         = 0x008D,
 612
 613         /*
 614          *  11n RIFS Enable Flag
 615          *  -----------------------------------------------------------
 616          *  Configuration :  Disable    Enable
 617          *  Values to set :  0          1
 618          *  -----------------------------------------------------------
 619          */
 620         WID_RIFS_MODE                   = 0x0094,
 621
 622         /*
 623          *  TX Abort Feature
 624          *  -----------------------------------------------------------
 625          *  Configuration :  Disable Self CTS    Enable Self CTS
 626          *  Values to set :             0                      1
 627          *  Configuration :  Disable TX Abort    Enable TX Abort
 628          *  Values to set :             2                      3
 629          *  Configuration :  Enable HW TX Abort Enable SW TX Abort
 630          *  Values to set :             4                      5
 631          *  -----------------------------------------------------------
 632          */
 633         WID_TX_ABORT_CONFIG             = 0x00A1,
 634
 635         WID_REG_TSSI_11B_VALUE          = 0x00A6,
 636         WID_REG_TSSI_11G_VALUE          = 0x00A7,
 637         WID_REG_TSSI_11N_VALUE          = 0x00A8,
 638         WID_TX_CALIBRATION              = 0x00A9,
 639         WID_DSCR_TSSI_11B_VALUE         = 0x00AA,
 640         WID_DSCR_TSSI_11G_VALUE         = 0x00AB,
 641         WID_DSCR_TSSI_11N_VALUE         = 0x00AC,
 642
 643         /*
 644          *  Immediate Block-Ack Support
 645          *  -----------------------------------------------------------
 646          *  Configuration : Disable                  Enable
 647          *  Values to set :    0                       1
 648          *  -----------------------------------------------------------
 649          */
 650         WID_11N_IMMEDIATE_BA_ENABLED    = 0x00AF,
 651
 652         /*
 653          *  TXOP Disable Flag
 654          *  -----------------------------------------------------------
 655          *  Configuration : Disable                  Enable
 656          *  Values to set :    1                        0
 657          *  -----------------------------------------------------------
 658          */
 659         WID_11N_TXOP_PROT_DISABLE       = 0x00B0,
 660
 661         WID_TX_POWER_LEVEL_11N          = 0x00B1,
 662
 663         /* Custom Character WID list */
 664         /* SCAN Complete notification WID*/
 665         WID_SCAN_COMPLETE               = 0x00C9,
 666
 667         WID_DEL_BEACON                  = 0x00CA,
 668
 669         WID_LOG_TERMINAL_SWITCH         = 0x00CD,
 670         WID_TX_POWER                    = 0x00CE,
 671         WID_WOWLAN_TRIGGER              = 0X00CF,
 672         WID_SET_MFP                     = 0x00D0,
 673
 674         WID_DEFAULT_MGMT_KEY_ID         = 0x00D2,
 675         /*  EMAC Short WID list */
 676         /*  RTS Threshold */
 677         /*
 678          *  -----------------------------------------------------------
 679          *  Configuration :   Any value between 256 to 2347
 680          *  Values to set :   Same value. Default is 2347
 681          *  -----------------------------------------------------------
 682          */
 683         WID_RTS_THRESHOLD               = 0x1000,
 684
 685         /*
 686          *  Fragmentation Threshold
 687          *  -----------------------------------------------------------
 688          *  Configuration :   Any value between 256 to 2346
 689          *  Values to set :   Same value. Default is 2346
 690          *  -----------------------------------------------------------
 691          */
 692         WID_FRAG_THRESHOLD              = 0x1001,
 693
 694         WID_SHORT_RETRY_LIMIT           = 0x1002,
 695         WID_LONG_RETRY_LIMIT            = 0x1003,
 696         WID_BEACON_INTERVAL             = 0x1006,
 697         WID_MEMORY_ACCESS_16BIT         = 0x1008,
 698         WID_PASSIVE_SCAN_TIME           = 0x100D,
 699         WID_JOIN_START_TIMEOUT          = 0x100F,
 700         WID_ASOC_TIMEOUT                = 0x1011,
 701         WID_11I_PROTOCOL_TIMEOUT        = 0x1012,
 702         WID_EAPOL_RESPONSE_TIMEOUT      = 0x1013,
 703
 704         /* NMAC Short WID list */
 705         WID_11N_SIG_QUAL_VAL            = 0x1085,
 706         WID_CCA_THRESHOLD               = 0x1087,
 707
 708         /* Custom Short WID list */
 709
 710         /* EMAC Integer WID list */
 711         WID_FAILED_COUNT                = 0x2000,
 712         WID_RETRY_COUNT                 = 0x2001,
 713         WID_MULTIPLE_RETRY_COUNT        = 0x2002,
 714         WID_FRAME_DUPLICATE_COUNT       = 0x2003,
 715         WID_ACK_FAILURE_COUNT           = 0x2004,
 716         WID_RECEIVED_FRAGMENT_COUNT     = 0x2005,
 717         WID_MCAST_RECEIVED_FRAME_COUNT  = 0x2006,
 718         WID_FCS_ERROR_COUNT             = 0x2007,
 719         WID_SUCCESS_FRAME_COUNT         = 0x2008,
 720         WID_HUT_TX_COUNT                = 0x200A,
 721         WID_TX_FRAGMENT_COUNT           = 0x200B,
 722         WID_TX_MULTICAST_FRAME_COUNT    = 0x200C,
 723         WID_RTS_SUCCESS_COUNT           = 0x200D,
 724         WID_RTS_FAILURE_COUNT           = 0x200E,
 725         WID_WEP_UNDECRYPTABLE_COUNT     = 0x200F,
 726         WID_REKEY_PERIOD                = 0x2010,
 727         WID_REKEY_PACKET_COUNT          = 0x2011,
 728         WID_1X_SERV_ADDR                = 0x2012,
 729         WID_STACK_IP_ADDR               = 0x2013,
 730         WID_STACK_NETMASK_ADDR          = 0x2014,
 731         WID_HW_RX_COUNT                 = 0x2015,
 732         WID_MEMORY_ADDRESS              = 0x201E,
 733         WID_MEMORY_ACCESS_32BIT         = 0x201F,
 734
 735         /* NMAC Integer WID list */
 736         /* Custom Integer WID list */
 737         WID_GET_INACTIVE_TIME           = 0x2084,
 738         /* EMAC String WID list */
 739         WID_SSID                        = 0x3000,
 740         WID_FIRMWARE_VERSION            = 0x3001,
 741         WID_OPERATIONAL_RATE_SET        = 0x3002,
 742         WID_BSSID                       = 0x3003,
 743         WID_WEP_KEY_VALUE               = 0x3004,
 744         WID_11I_PSK                     = 0x3008,
 745         WID_11E_P_ACTION_REQ            = 0x3009,
 746         WID_1X_KEY                      = 0x300A,
 747         WID_HARDWARE_VERSION            = 0x300B,
 748         WID_MAC_ADDR                    = 0x300C,
 749         WID_HUT_DEST_ADDR               = 0x300D,
 750         WID_PHY_VERSION                 = 0x300F,
 751         WID_SUPP_USERNAME               = 0x3010,
 752         WID_SUPP_PASSWORD               = 0x3011,
 753         WID_SITE_SURVEY_RESULTS         = 0x3012,
 754         WID_RX_POWER_LEVEL              = 0x3013,
 755         WID_SET_STA_MAC_INACTIVE_TIME   = 0x3017,
 756         WID_ADD_WEP_KEY                 = 0x3019,
 757         WID_REMOVE_WEP_KEY              = 0x301A,
 758         WID_ADD_PTK                     = 0x301B,
 759         WID_ADD_RX_GTK                  = 0x301C,
 760         WID_ADD_TX_GTK                  = 0x301D,
 761         WID_REMOVE_KEY                  = 0x301E,
 762         WID_ASSOC_REQ_INFO              = 0x301F,
 763         WID_ASSOC_RES_INFO              = 0x3020,
 764         WID_ADD_IGTK                    = 0x3022,
 765         WID_MANUFACTURER                = 0x3026, /* Added for CAPI tool */
 766         WID_MODEL_NAME                  = 0x3027, /* Added for CAPI tool */
 767         WID_MODEL_NUM                   = 0x3028, /* Added for CAPI tool */
 768         WID_DEVICE_NAME                 = 0x3029, /* Added for CAPI tool */
 769
 770         /* NMAC String WID list */
 771         WID_SET_OPERATION_MODE          = 0x3079,
 772         WID_11N_P_ACTION_REQ            = 0x3080,
 773         WID_HUT_TEST_ID                 = 0x3081,
 774         WID_PMKID_INFO                  = 0x3082,
 775         WID_FIRMWARE_INFO               = 0x3083,
 776         WID_REGISTER_FRAME              = 0x3084,
 777         WID_DEL_ALL_STA                 = 0x3085,
 778         WID_REMAIN_ON_CHAN              = 0x3996,
 779         WID_SSID_PROBE_REQ              = 0x3997,
 780         WID_JOIN_REQ_EXTENDED           = 0x3998,
 781
 782         WID_IP_ADDRESS                  = 0x3999,
 783
 784         /* Custom String WID list */
 785
 786         /* EMAC Binary WID list */
 787         WID_UAPSD_CONFIG                = 0x4001,
 788         WID_UAPSD_STATUS                = 0x4002,
 789         WID_WMM_AP_AC_PARAMS            = 0x4003,
 790         WID_WMM_STA_AC_PARAMS           = 0x4004,
 791         WID_NETWORK_INFO                = 0x4005,
 792         WID_STA_JOIN_INFO               = 0x4006,
 793         WID_CONNECTED_STA_LIST          = 0x4007,
 794
 795         /* NMAC Binary WID list */
 796         WID_11N_AUTORATE_TABLE          = 0x4080,
 797
 798         WID_SCAN_CHANNEL_LIST           = 0x4084,
 799
 800         WID_INFO_ELEMENT_PROBE          = 0x4085,
 801         WID_INFO_ELEMENT_ASSOCIATE      = 0x4086,
 802         WID_ADD_STA                     = 0X4087,
 803         WID_REMOVE_STA                  = 0X4088,
 804         WID_EDIT_STA                    = 0X4089,
 805         WID_ADD_BEACON                  = 0x408a,
 806
 807         WID_SETUP_MULTICAST_FILTER      = 0x408b,
 808         WID_EXTERNAL_AUTH_PARAM         = 0x408d,
 809         /* Miscellaneous WIDs */
 810         WID_ALL                         = 0x7FFE,
 811         WID_MAX                         = 0xFFFF
 812 };
 813
 814 #endif