1 #include <linux/slab.h>
2 #include <linux/export.h>
3 #include <linux/etherdevice.h>
5 #include "hostap_80211.h"
6 #include "hostap_common.h"
7 #include "hostap_wlan.h"
11 /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
12 /* Ethernet-II snap header (RFC1042 for most EtherTypes) */
13 static unsigned char rfc1042_header[] =
14 { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
15 /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
16 static unsigned char bridge_tunnel_header[] =
17 { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
18 /* No encapsulation header if EtherType < 0x600 (=length) */
20 void hostap_dump_tx_80211(const char *name, struct sk_buff *skb)
22 struct ieee80211_hdr *hdr;
25 hdr = (struct ieee80211_hdr *) skb->data;
27 printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n",
28 name, skb->len, jiffies);
33 fc = le16_to_cpu(hdr->frame_control);
34 printk(KERN_DEBUG " FC=0x%04x (type=%d:%d)%s%s",
35 fc, (fc & IEEE80211_FCTL_FTYPE) >> 2,
36 (fc & IEEE80211_FCTL_STYPE) >> 4,
37 fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "",
38 fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : "");
40 if (skb->len < IEEE80211_DATA_HDR3_LEN) {
45 printk(" dur=0x%04x seq=0x%04x\n", le16_to_cpu(hdr->duration_id),
46 le16_to_cpu(hdr->seq_ctrl));
48 printk(KERN_DEBUG " A1=%pM", hdr->addr1);
49 printk(" A2=%pM", hdr->addr2);
50 printk(" A3=%pM", hdr->addr3);
52 printk(" A4=%pM", hdr->addr4);
57 /* hard_start_xmit function for data interfaces (wlan#, wlan#wds#, wlan#sta)
58 * Convert Ethernet header into a suitable IEEE 802.11 header depending on
59 * device configuration. */
60 netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb,
61 struct net_device *dev)
63 struct hostap_interface *iface;
65 int need_headroom, need_tailroom = 0;
66 struct ieee80211_hdr hdr;
67 u16 fc, ethertype = 0;
69 WDS_NO = 0, WDS_OWN_FRAME, WDS_COMPLIANT_FRAME
72 int hdr_len, encaps_len, skip_header_bytes;
74 struct hostap_skb_tx_data *meta;
76 iface = netdev_priv(dev);
79 if (skb->len < ETH_HLEN) {
80 printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb "
81 "(len=%d)\n", dev->name, skb->len);
86 if (local->ddev != dev) {
87 use_wds = (local->iw_mode == IW_MODE_MASTER &&
88 !(local->wds_type & HOSTAP_WDS_STANDARD_FRAME)) ?
89 WDS_OWN_FRAME : WDS_COMPLIANT_FRAME;
90 if (dev == local->stadev) {
93 } else if (dev == local->apdev) {
94 printk(KERN_DEBUG "%s: prism2_tx: trying to use "
95 "AP device with Ethernet net dev\n", dev->name);
100 if (local->iw_mode == IW_MODE_REPEAT) {
101 printk(KERN_DEBUG "%s: prism2_tx: trying to use "
102 "non-WDS link in Repeater mode\n", dev->name);
105 } else if (local->iw_mode == IW_MODE_INFRA &&
106 (local->wds_type & HOSTAP_WDS_AP_CLIENT) &&
107 !ether_addr_equal(skb->data + ETH_ALEN, dev->dev_addr)) {
108 /* AP client mode: send frames with foreign src addr
109 * using 4-addr WDS frames */
110 use_wds = WDS_COMPLIANT_FRAME;
114 /* Incoming skb->data: dst_addr[6], src_addr[6], proto[2], payload
116 * Prism2 TX frame with 802.11 header:
117 * txdesc (address order depending on used mode; includes dst_addr and
118 * src_addr), possible encapsulation (RFC1042/Bridge-Tunnel;
119 * proto[2], payload {, possible addr4[6]} */
121 ethertype = (skb->data[12] << 8) | skb->data[13];
123 memset(&hdr, 0, sizeof(hdr));
125 /* Length of data after IEEE 802.11 header */
128 skip_header_bytes = ETH_HLEN;
129 if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) {
130 encaps_data = bridge_tunnel_header;
131 encaps_len = sizeof(bridge_tunnel_header);
132 skip_header_bytes -= 2;
133 } else if (ethertype >= 0x600) {
134 encaps_data = rfc1042_header;
135 encaps_len = sizeof(rfc1042_header);
136 skip_header_bytes -= 2;
139 fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA;
140 hdr_len = IEEE80211_DATA_HDR3_LEN;
142 if (use_wds != WDS_NO) {
143 /* Note! Prism2 station firmware has problems with sending real
144 * 802.11 frames with four addresses; until these problems can
145 * be fixed or worked around, 4-addr frames needed for WDS are
146 * using incompatible format: FromDS flag is not set and the
147 * fourth address is added after the frame payload; it is
148 * assumed, that the receiving station knows how to handle this
151 if (use_wds == WDS_COMPLIANT_FRAME) {
152 fc |= IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS;
153 /* From&To DS: Addr1 = RA, Addr2 = TA, Addr3 = DA,
155 skb_copy_from_linear_data_offset(skb, ETH_ALEN,
156 &hdr.addr4, ETH_ALEN);
159 /* bogus 4-addr format to workaround Prism2 station
161 fc |= IEEE80211_FCTL_TODS;
162 /* From DS: Addr1 = DA (used as RA),
163 * Addr2 = BSSID (used as TA), Addr3 = SA (used as DA),
166 /* SA from skb->data + ETH_ALEN will be added after
167 * frame payload; use hdr.addr4 as a temporary buffer
169 skb_copy_from_linear_data_offset(skb, ETH_ALEN,
170 &hdr.addr4, ETH_ALEN);
171 need_tailroom += ETH_ALEN;
174 /* send broadcast and multicast frames to broadcast RA, if
175 * configured; otherwise, use unicast RA of the WDS link */
176 if ((local->wds_type & HOSTAP_WDS_BROADCAST_RA) &&
177 is_multicast_ether_addr(skb->data))
178 eth_broadcast_addr(hdr.addr1);
179 else if (iface->type == HOSTAP_INTERFACE_WDS)
180 memcpy(&hdr.addr1, iface->u.wds.remote_addr,
183 memcpy(&hdr.addr1, local->bssid, ETH_ALEN);
184 memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN);
185 skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN);
186 } else if (local->iw_mode == IW_MODE_MASTER && !to_assoc_ap) {
187 fc |= IEEE80211_FCTL_FROMDS;
188 /* From DS: Addr1 = DA, Addr2 = BSSID, Addr3 = SA */
189 skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN);
190 memcpy(&hdr.addr2, dev->dev_addr, ETH_ALEN);
191 skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr3,
193 } else if (local->iw_mode == IW_MODE_INFRA || to_assoc_ap) {
194 fc |= IEEE80211_FCTL_TODS;
195 /* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */
196 memcpy(&hdr.addr1, to_assoc_ap ?
197 local->assoc_ap_addr : local->bssid, ETH_ALEN);
198 skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2,
200 skb_copy_from_linear_data(skb, &hdr.addr3, ETH_ALEN);
201 } else if (local->iw_mode == IW_MODE_ADHOC) {
202 /* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */
203 skb_copy_from_linear_data(skb, &hdr.addr1, ETH_ALEN);
204 skb_copy_from_linear_data_offset(skb, ETH_ALEN, &hdr.addr2,
206 memcpy(&hdr.addr3, local->bssid, ETH_ALEN);
209 hdr.frame_control = cpu_to_le16(fc);
211 skb_pull(skb, skip_header_bytes);
212 need_headroom = local->func->need_tx_headroom + hdr_len + encaps_len;
213 if (skb_tailroom(skb) < need_tailroom) {
214 skb = skb_unshare(skb, GFP_ATOMIC);
216 iface->stats.tx_dropped++;
219 if (pskb_expand_head(skb, need_headroom, need_tailroom,
222 iface->stats.tx_dropped++;
225 } else if (skb_headroom(skb) < need_headroom) {
226 struct sk_buff *tmp = skb;
227 skb = skb_realloc_headroom(skb, need_headroom);
230 iface->stats.tx_dropped++;
234 skb = skb_unshare(skb, GFP_ATOMIC);
236 iface->stats.tx_dropped++;
242 memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len);
243 memcpy(skb_push(skb, hdr_len), &hdr, hdr_len);
244 if (use_wds == WDS_OWN_FRAME) {
245 memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN);
248 iface->stats.tx_packets++;
249 iface->stats.tx_bytes += skb->len;
251 skb_reset_mac_header(skb);
252 meta = (struct hostap_skb_tx_data *) skb->cb;
253 memset(meta, 0, sizeof(*meta));
254 meta->magic = HOSTAP_SKB_TX_DATA_MAGIC;
256 meta->flags |= HOSTAP_TX_FLAGS_WDS;
257 meta->ethertype = ethertype;
260 /* Send IEEE 802.11 encapsulated frame using the master radio device */
261 skb->dev = local->dev;
267 /* hard_start_xmit function for hostapd wlan#ap interfaces */
268 netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb,
269 struct net_device *dev)
271 struct hostap_interface *iface;
273 struct hostap_skb_tx_data *meta;
274 struct ieee80211_hdr *hdr;
277 iface = netdev_priv(dev);
278 local = iface->local;
281 printk(KERN_DEBUG "%s: hostap_mgmt_start_xmit: short skb "
282 "(len=%d)\n", dev->name, skb->len);
287 iface->stats.tx_packets++;
288 iface->stats.tx_bytes += skb->len;
290 meta = (struct hostap_skb_tx_data *) skb->cb;
291 memset(meta, 0, sizeof(*meta));
292 meta->magic = HOSTAP_SKB_TX_DATA_MAGIC;
295 if (skb->len >= IEEE80211_DATA_HDR3_LEN + sizeof(rfc1042_header) + 2) {
296 hdr = (struct ieee80211_hdr *) skb->data;
297 fc = le16_to_cpu(hdr->frame_control);
298 if (ieee80211_is_data(hdr->frame_control) &&
299 (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DATA) {
300 u8 *pos = &skb->data[IEEE80211_DATA_HDR3_LEN +
301 sizeof(rfc1042_header)];
302 meta->ethertype = (pos[0] << 8) | pos[1];
306 /* Send IEEE 802.11 encapsulated frame using the master radio device */
307 skb->dev = local->dev;
313 /* Called only from software IRQ */
314 static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb,
315 struct lib80211_crypt_data *crypt)
317 struct hostap_interface *iface;
319 struct ieee80211_hdr *hdr;
320 int prefix_len, postfix_len, hdr_len, res;
322 iface = netdev_priv(skb->dev);
323 local = iface->local;
325 if (skb->len < IEEE80211_DATA_HDR3_LEN) {
330 if (local->tkip_countermeasures &&
331 strcmp(crypt->ops->name, "TKIP") == 0) {
332 hdr = (struct ieee80211_hdr *) skb->data;
333 if (net_ratelimit()) {
334 printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
335 "TX packet to %pM\n",
336 local->dev->name, hdr->addr1);
342 skb = skb_unshare(skb, GFP_ATOMIC);
346 prefix_len = crypt->ops->extra_mpdu_prefix_len +
347 crypt->ops->extra_msdu_prefix_len;
348 postfix_len = crypt->ops->extra_mpdu_postfix_len +
349 crypt->ops->extra_msdu_postfix_len;
350 if ((skb_headroom(skb) < prefix_len ||
351 skb_tailroom(skb) < postfix_len) &&
352 pskb_expand_head(skb, prefix_len, postfix_len, GFP_ATOMIC)) {
357 hdr = (struct ieee80211_hdr *) skb->data;
358 hdr_len = hostap_80211_get_hdrlen(hdr->frame_control);
360 /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
361 * call both MSDU and MPDU encryption functions from here. */
362 atomic_inc(&crypt->refcnt);
364 if (crypt->ops->encrypt_msdu)
365 res = crypt->ops->encrypt_msdu(skb, hdr_len, crypt->priv);
366 if (res == 0 && crypt->ops->encrypt_mpdu)
367 res = crypt->ops->encrypt_mpdu(skb, hdr_len, crypt->priv);
368 atomic_dec(&crypt->refcnt);
378 /* hard_start_xmit function for master radio interface wifi#.
379 * AP processing (TX rate control, power save buffering, etc.).
380 * Use hardware TX function to send the frame. */
381 netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb,
382 struct net_device *dev)
384 struct hostap_interface *iface;
386 netdev_tx_t ret = NETDEV_TX_BUSY;
388 struct hostap_tx_data tx;
390 struct hostap_skb_tx_data *meta;
392 struct ieee80211_hdr *hdr;
394 iface = netdev_priv(dev);
395 local = iface->local;
400 meta = (struct hostap_skb_tx_data *) skb->cb;
401 if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) {
402 printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, "
403 "expected 0x%08x)\n",
404 dev->name, meta->magic, HOSTAP_SKB_TX_DATA_MAGIC);
406 iface->stats.tx_dropped++;
410 if (local->host_encrypt) {
411 /* Set crypt to default algorithm and key; will be replaced in
412 * AP code if STA has own alg/key */
413 tx.crypt = local->crypt_info.crypt[local->crypt_info.tx_keyidx];
421 printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb "
422 "(len=%d)\n", dev->name, skb->len);
424 iface->stats.tx_dropped++;
429 * Wi-Fi 802.11b test plan suggests that AP should ignore power save
430 * bit in authentication and (re)association frames and assume tha
431 * STA remains awake for the response. */
432 tx_ret = hostap_handle_sta_tx(local, &tx);
434 meta = (struct hostap_skb_tx_data *) skb->cb;
435 hdr = (struct ieee80211_hdr *) skb->data;
436 fc = le16_to_cpu(hdr->frame_control);
440 case AP_TX_CONTINUE_NOT_AUTHORIZED:
441 if (local->ieee_802_1x &&
442 ieee80211_is_data(hdr->frame_control) &&
443 meta->ethertype != ETH_P_PAE &&
444 !(meta->flags & HOSTAP_TX_FLAGS_WDS)) {
445 printk(KERN_DEBUG "%s: dropped frame to unauthorized "
446 "port (IEEE 802.1X): ethertype=0x%04x\n",
447 dev->name, meta->ethertype);
448 hostap_dump_tx_80211(dev->name, skb);
450 ret = NETDEV_TX_OK; /* drop packet */
451 iface->stats.tx_dropped++;
456 ret = NETDEV_TX_OK; /* drop packet */
457 iface->stats.tx_dropped++;
462 /* do not free skb here, it will be freed when the
463 * buffered frame is sent/timed out */
468 /* Request TX callback if protocol version is 2 in 802.11 header;
469 * this version 2 is a special case used between hostapd and kernel
471 if (((fc & IEEE80211_FCTL_VERS) == BIT(1)) &&
472 local->ap && local->ap->tx_callback_idx && meta->tx_cb_idx == 0) {
473 meta->tx_cb_idx = local->ap->tx_callback_idx;
475 /* remove special version from the frame header */
476 fc &= ~IEEE80211_FCTL_VERS;
477 hdr->frame_control = cpu_to_le16(fc);
480 if (!ieee80211_is_data(hdr->frame_control)) {
485 if (local->ieee_802_1x && meta->ethertype == ETH_P_PAE && tx.crypt &&
486 !(fc & IEEE80211_FCTL_PROTECTED)) {
488 PDEBUG(DEBUG_EXTRA2, "%s: TX: IEEE 802.1X - passing "
489 "unencrypted EAPOL frame\n", dev->name);
490 tx.crypt = NULL; /* no encryption for IEEE 802.1X frames */
493 if (tx.crypt && (!tx.crypt->ops || !tx.crypt->ops->encrypt_mpdu))
495 else if ((tx.crypt ||
496 local->crypt_info.crypt[local->crypt_info.tx_keyidx]) &&
498 /* Add ISWEP flag both for firmware and host based encryption
500 fc |= IEEE80211_FCTL_PROTECTED;
501 hdr->frame_control = cpu_to_le16(fc);
502 } else if (local->drop_unencrypted &&
503 ieee80211_is_data(hdr->frame_control) &&
504 meta->ethertype != ETH_P_PAE) {
505 if (net_ratelimit()) {
506 printk(KERN_DEBUG "%s: dropped unencrypted TX data "
507 "frame (drop_unencrypted=1)\n", dev->name);
509 iface->stats.tx_dropped++;
515 skb = hostap_tx_encrypt(skb, tx.crypt);
517 printk(KERN_DEBUG "%s: TX - encryption failed\n",
522 meta = (struct hostap_skb_tx_data *) skb->cb;
523 if (meta->magic != HOSTAP_SKB_TX_DATA_MAGIC) {
524 printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, "
525 "expected 0x%08x) after hostap_tx_encrypt\n",
526 dev->name, meta->magic,
527 HOSTAP_SKB_TX_DATA_MAGIC);
529 iface->stats.tx_dropped++;
534 if (local->func->tx == NULL || local->func->tx(skb, dev)) {
536 iface->stats.tx_dropped++;
539 iface->stats.tx_packets++;
540 iface->stats.tx_bytes += skb->len;
544 if (ret == NETDEV_TX_OK && skb)
548 hostap_handle_sta_release(tx.sta_ptr);
553 EXPORT_SYMBOL(hostap_master_start_xmit);