2 * Copyright (c) 2010 Broadcom Corporation
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16 * File contents: support functions for PCI/PCIe
19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21 #include <linux/delay.h>
24 #include <chipcommon.h>
25 #include <brcmu_utils.h>
26 #include <brcm_hw_ids.h>
34 /* slow clock source mask */
35 #define SCC_SS_MASK 0x00000007
36 /* source of slow clock is LPO */
37 #define SCC_SS_LPO 0x00000000
38 /* source of slow clock is crystal */
39 #define SCC_SS_XTAL 0x00000001
40 /* source of slow clock is PCI */
41 #define SCC_SS_PCI 0x00000002
42 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
43 #define SCC_LF 0x00000200
44 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
45 #define SCC_LP 0x00000400
46 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
47 #define SCC_FS 0x00000800
48 /* IgnorePllOffReq, 1/0:
49 * power logic ignores/honors PLL clock disable requests from core
51 #define SCC_IP 0x00001000
52 /* XtalControlEn, 1/0:
53 * power logic does/doesn't disable crystal when appropriate
55 #define SCC_XC 0x00002000
56 /* XtalPU (RO), 1/0: crystal running/disabled */
57 #define SCC_XP 0x00004000
58 /* ClockDivider (SlowClk = 1/(4+divisor)) */
59 #define SCC_CD_MASK 0xffff0000
60 #define SCC_CD_SHIFT 16
63 /* ILPen: Enable Idle Low Power */
64 #define SYCC_IE 0x00000001
65 /* ALPen: Enable Active Low Power */
66 #define SYCC_AE 0x00000002
68 #define SYCC_FP 0x00000004
69 /* Force ALP (or HT if ALPen is not set */
70 #define SYCC_AR 0x00000008
72 #define SYCC_HR 0x00000010
73 /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */
74 #define SYCC_CD_MASK 0xffff0000
75 #define SYCC_CD_SHIFT 16
77 #define CST4329_SPROM_OTP_SEL_MASK 0x00000003
78 /* OTP is powered up, use def. CIS, no SPROM */
79 #define CST4329_DEFCIS_SEL 0
80 /* OTP is powered up, SPROM is present */
81 #define CST4329_SPROM_SEL 1
82 /* OTP is powered up, no SPROM */
83 #define CST4329_OTP_SEL 2
84 /* OTP is powered down, SPROM is present */
85 #define CST4329_OTP_PWRDN 3
87 #define CST4329_SPI_SDIO_MODE_MASK 0x00000004
88 #define CST4329_SPI_SDIO_MODE_SHIFT 2
90 /* 43224 chip-specific ChipControl register bits */
91 #define CCTRL43224_GPIO_TOGGLE 0x8000
92 /* 12 mA drive strength */
93 #define CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0
94 /* 12 mA drive strength for later 43224s */
95 #define CCTRL_43224B0_12MA_LED_DRIVE 0xF0
97 /* 43236 Chip specific ChipStatus register bits */
98 #define CST43236_SFLASH_MASK 0x00000040
99 #define CST43236_OTP_MASK 0x00000080
100 #define CST43236_HSIC_MASK 0x00000100 /* USB/HSIC */
101 #define CST43236_BP_CLK 0x00000200 /* 120/96Mbps */
102 #define CST43236_BOOT_MASK 0x00001800
103 #define CST43236_BOOT_SHIFT 11
104 #define CST43236_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */
105 #define CST43236_BOOT_FROM_ROM 1 /* boot from ROM */
106 #define CST43236_BOOT_FROM_FLASH 2 /* boot from FLASH */
107 #define CST43236_BOOT_FROM_INVALID 3
109 /* 4331 chip-specific ChipControl register bits */
111 #define CCTRL4331_BT_COEXIST (1<<0)
112 /* 0 SECI is disabled (JTAG functional) */
113 #define CCTRL4331_SECI (1<<1)
115 #define CCTRL4331_EXT_LNA (1<<2)
116 /* sprom/gpio13-15 mux */
117 #define CCTRL4331_SPROM_GPIO13_15 (1<<3)
118 /* 0 ext pa disable, 1 ext pa enabled */
119 #define CCTRL4331_EXTPA_EN (1<<4)
120 /* set drive out GPIO_CLK on sprom_cs pin */
121 #define CCTRL4331_GPIOCLK_ON_SPROMCS (1<<5)
122 /* use sprom_cs pin as PCIE mdio interface */
123 #define CCTRL4331_PCIE_MDIO_ON_SPROMCS (1<<6)
124 /* aband extpa will be at gpio2/5 and sprom_dout */
125 #define CCTRL4331_EXTPA_ON_GPIO2_5 (1<<7)
126 /* override core control on pipe_AuxClkEnable */
127 #define CCTRL4331_OVR_PIPEAUXCLKEN (1<<8)
128 /* override core control on pipe_AuxPowerDown */
129 #define CCTRL4331_OVR_PIPEAUXPWRDOWN (1<<9)
130 /* pcie_auxclkenable */
131 #define CCTRL4331_PCIE_AUXCLKEN (1<<10)
132 /* pcie_pipe_pllpowerdown */
133 #define CCTRL4331_PCIE_PIPE_PLLDOWN (1<<11)
134 /* enable bt_shd0 at gpio4 */
135 #define CCTRL4331_BT_SHD0_ON_GPIO4 (1<<16)
136 /* enable bt_shd1 at gpio5 */
137 #define CCTRL4331_BT_SHD1_ON_GPIO5 (1<<17)
139 /* 4331 Chip specific ChipStatus register bits */
140 /* crystal frequency 20/40Mhz */
141 #define CST4331_XTAL_FREQ 0x00000001
142 #define CST4331_SPROM_PRESENT 0x00000002
143 #define CST4331_OTP_PRESENT 0x00000004
144 #define CST4331_LDO_RF 0x00000008
145 #define CST4331_LDO_PAR 0x00000010
147 /* 4319 chip-specific ChipStatus register bits */
148 #define CST4319_SPI_CPULESSUSB 0x00000001
149 #define CST4319_SPI_CLK_POL 0x00000002
150 #define CST4319_SPI_CLK_PH 0x00000008
151 /* gpio [7:6], SDIO CIS selection */
152 #define CST4319_SPROM_OTP_SEL_MASK 0x000000c0
153 #define CST4319_SPROM_OTP_SEL_SHIFT 6
154 /* use default CIS, OTP is powered up */
155 #define CST4319_DEFCIS_SEL 0x00000000
156 /* use SPROM, OTP is powered up */
157 #define CST4319_SPROM_SEL 0x00000040
158 /* use OTP, OTP is powered up */
159 #define CST4319_OTP_SEL 0x00000080
160 /* use SPROM, OTP is powered down */
161 #define CST4319_OTP_PWRDN 0x000000c0
162 /* gpio [8], sdio/usb mode */
163 #define CST4319_SDIO_USB_MODE 0x00000100
164 #define CST4319_REMAP_SEL_MASK 0x00000600
165 #define CST4319_ILPDIV_EN 0x00000800
166 #define CST4319_XTAL_PD_POL 0x00001000
167 #define CST4319_LPO_SEL 0x00002000
168 #define CST4319_RES_INIT_MODE 0x0000c000
169 /* PALDO is configured with external PNP */
170 #define CST4319_PALDO_EXTPNP 0x00010000
171 #define CST4319_CBUCK_MODE_MASK 0x00060000
172 #define CST4319_CBUCK_MODE_BURST 0x00020000
173 #define CST4319_CBUCK_MODE_LPBURST 0x00060000
174 #define CST4319_RCAL_VALID 0x01000000
175 #define CST4319_RCAL_VALUE_MASK 0x3e000000
176 #define CST4319_RCAL_VALUE_SHIFT 25
178 /* 4336 chip-specific ChipStatus register bits */
179 #define CST4336_SPI_MODE_MASK 0x00000001
180 #define CST4336_SPROM_PRESENT 0x00000002
181 #define CST4336_OTP_PRESENT 0x00000004
182 #define CST4336_ARMREMAP_0 0x00000008
183 #define CST4336_ILPDIV_EN_MASK 0x00000010
184 #define CST4336_ILPDIV_EN_SHIFT 4
185 #define CST4336_XTAL_PD_POL_MASK 0x00000020
186 #define CST4336_XTAL_PD_POL_SHIFT 5
187 #define CST4336_LPO_SEL_MASK 0x00000040
188 #define CST4336_LPO_SEL_SHIFT 6
189 #define CST4336_RES_INIT_MODE_MASK 0x00000180
190 #define CST4336_RES_INIT_MODE_SHIFT 7
191 #define CST4336_CBUCK_MODE_MASK 0x00000600
192 #define CST4336_CBUCK_MODE_SHIFT 9
194 /* 4313 chip-specific ChipStatus register bits */
195 #define CST4313_SPROM_PRESENT 1
196 #define CST4313_OTP_PRESENT 2
197 #define CST4313_SPROM_OTP_SEL_MASK 0x00000002
198 #define CST4313_SPROM_OTP_SEL_SHIFT 0
200 /* 4313 Chip specific ChipControl register bits */
201 /* 12 mA drive strengh for later 4313 */
202 #define CCTRL_4313_12MA_LED_DRIVE 0x00000007
204 /* Manufacturer Ids */
205 #define MFGID_ARM 0x43b
206 #define MFGID_BRCM 0x4bf
207 #define MFGID_MIPS 0x4a7
209 /* Enumeration ROM registers */
210 #define ER_EROMENTRY 0x000
211 #define ER_REMAPCONTROL 0xe00
212 #define ER_REMAPSELECT 0xe04
213 #define ER_MASTERSELECT 0xe10
214 #define ER_ITCR 0xf00
215 #define ER_ITIP 0xf04
225 #define ER_BAD 0xffffffff
227 /* EROM CompIdentA */
228 #define CIA_MFG_MASK 0xfff00000
229 #define CIA_MFG_SHIFT 20
230 #define CIA_CID_MASK 0x000fff00
231 #define CIA_CID_SHIFT 8
232 #define CIA_CCL_MASK 0x000000f0
233 #define CIA_CCL_SHIFT 4
235 /* EROM CompIdentB */
236 #define CIB_REV_MASK 0xff000000
237 #define CIB_REV_SHIFT 24
238 #define CIB_NSW_MASK 0x00f80000
239 #define CIB_NSW_SHIFT 19
240 #define CIB_NMW_MASK 0x0007c000
241 #define CIB_NMW_SHIFT 14
242 #define CIB_NSP_MASK 0x00003e00
243 #define CIB_NSP_SHIFT 9
244 #define CIB_NMP_MASK 0x000001f0
245 #define CIB_NMP_SHIFT 4
248 #define AD_ADDR_MASK 0xfffff000
249 #define AD_SP_MASK 0x00000f00
250 #define AD_SP_SHIFT 8
251 #define AD_ST_MASK 0x000000c0
252 #define AD_ST_SHIFT 6
253 #define AD_ST_SLAVE 0x00000000
254 #define AD_ST_BRIDGE 0x00000040
255 #define AD_ST_SWRAP 0x00000080
256 #define AD_ST_MWRAP 0x000000c0
257 #define AD_SZ_MASK 0x00000030
258 #define AD_SZ_SHIFT 4
259 #define AD_SZ_4K 0x00000000
260 #define AD_SZ_8K 0x00000010
261 #define AD_SZ_16K 0x00000020
262 #define AD_SZ_SZD 0x00000030
263 #define AD_AG32 0x00000008
264 #define AD_ADDR_ALIGN 0x00000fff
265 #define AD_SZ_BASE 0x00001000 /* 4KB */
268 #define SD_SZ_MASK 0xfffff000
269 #define SD_SG32 0x00000008
270 #define SD_SZ_ALIGN 0x00000fff
272 /* PCI config space bit 4 for 4306c0 slow clock source */
273 #define PCI_CFG_GPIO_SCS 0x10
274 /* PCI config space GPIO 14 for Xtal power-up */
275 #define PCI_CFG_GPIO_XTAL 0x40
276 /* PCI config space GPIO 15 for PLL power-down */
277 #define PCI_CFG_GPIO_PLL 0x80
279 /* power control defines */
280 #define PLL_DELAY 150 /* us pll on delay */
281 #define FREF_DELAY 200 /* us fref change delay */
282 #define XTAL_ON_DELAY 1000 /* us crystal power-on delay */
287 #define NOREV -1 /* Invalid rev */
289 /* GPIO Based LED powersave defines */
290 #define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */
291 #define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */
293 /* When Srom support present, fields in sromcontrol */
294 #define SRC_START 0x80000000
295 #define SRC_BUSY 0x80000000
296 #define SRC_OPCODE 0x60000000
297 #define SRC_OP_READ 0x00000000
298 #define SRC_OP_WRITE 0x20000000
299 #define SRC_OP_WRDIS 0x40000000
300 #define SRC_OP_WREN 0x60000000
301 #define SRC_OTPSEL 0x00000010
302 #define SRC_LOCK 0x00000008
303 #define SRC_SIZE_MASK 0x00000006
304 #define SRC_SIZE_1K 0x00000000
305 #define SRC_SIZE_4K 0x00000002
306 #define SRC_SIZE_16K 0x00000004
307 #define SRC_SIZE_SHIFT 1
308 #define SRC_PRESENT 0x00000001
310 /* External PA enable mask */
311 #define GPIO_CTRL_EPA_EN_MASK 0x40
313 #define DEFAULT_GPIOTIMERVAL \
314 ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)
316 #define BADIDX (SI_MAXCORES + 1)
318 #define IS_SIM(chippkg) \
319 ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID))
321 #define GOODCOREADDR(x, b) \
322 (((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \
323 IS_ALIGNED((x), SI_CORE_SIZE))
326 u32 oobselina30; /* 0x000 */
327 u32 oobselina74; /* 0x004 */
329 u32 oobselinb30; /* 0x020 */
330 u32 oobselinb74; /* 0x024 */
332 u32 oobselinc30; /* 0x040 */
333 u32 oobselinc74; /* 0x044 */
335 u32 oobselind30; /* 0x060 */
336 u32 oobselind74; /* 0x064 */
338 u32 oobselouta30; /* 0x100 */
339 u32 oobselouta74; /* 0x104 */
341 u32 oobseloutb30; /* 0x120 */
342 u32 oobseloutb74; /* 0x124 */
344 u32 oobseloutc30; /* 0x140 */
345 u32 oobseloutc74; /* 0x144 */
347 u32 oobseloutd30; /* 0x160 */
348 u32 oobseloutd74; /* 0x164 */
350 u32 oobsynca; /* 0x200 */
351 u32 oobseloutaen; /* 0x204 */
353 u32 oobsyncb; /* 0x220 */
354 u32 oobseloutben; /* 0x224 */
356 u32 oobsyncc; /* 0x240 */
357 u32 oobseloutcen; /* 0x244 */
359 u32 oobsyncd; /* 0x260 */
360 u32 oobseloutden; /* 0x264 */
362 u32 oobaextwidth; /* 0x300 */
363 u32 oobainwidth; /* 0x304 */
364 u32 oobaoutwidth; /* 0x308 */
366 u32 oobbextwidth; /* 0x320 */
367 u32 oobbinwidth; /* 0x324 */
368 u32 oobboutwidth; /* 0x328 */
370 u32 oobcextwidth; /* 0x340 */
371 u32 oobcinwidth; /* 0x344 */
372 u32 oobcoutwidth; /* 0x348 */
374 u32 oobdextwidth; /* 0x360 */
375 u32 oobdinwidth; /* 0x364 */
376 u32 oobdoutwidth; /* 0x368 */
378 u32 ioctrlset; /* 0x400 */
379 u32 ioctrlclear; /* 0x404 */
380 u32 ioctrl; /* 0x408 */
382 u32 iostatus; /* 0x500 */
384 u32 ioctrlwidth; /* 0x700 */
385 u32 iostatuswidth; /* 0x704 */
387 u32 resetctrl; /* 0x800 */
388 u32 resetstatus; /* 0x804 */
389 u32 resetreadid; /* 0x808 */
390 u32 resetwriteid; /* 0x80c */
392 u32 errlogctrl; /* 0x900 */
393 u32 errlogdone; /* 0x904 */
394 u32 errlogstatus; /* 0x908 */
395 u32 errlogaddrlo; /* 0x90c */
396 u32 errlogaddrhi; /* 0x910 */
397 u32 errlogid; /* 0x914 */
398 u32 errloguser; /* 0x918 */
399 u32 errlogflags; /* 0x91c */
401 u32 intstatus; /* 0xa00 */
403 u32 config; /* 0xe00 */
405 u32 itcr; /* 0xf00 */
407 u32 itipooba; /* 0xf10 */
408 u32 itipoobb; /* 0xf14 */
409 u32 itipoobc; /* 0xf18 */
410 u32 itipoobd; /* 0xf1c */
412 u32 itipoobaout; /* 0xf30 */
413 u32 itipoobbout; /* 0xf34 */
414 u32 itipoobcout; /* 0xf38 */
415 u32 itipoobdout; /* 0xf3c */
417 u32 itopooba; /* 0xf50 */
418 u32 itopoobb; /* 0xf54 */
419 u32 itopoobc; /* 0xf58 */
420 u32 itopoobd; /* 0xf5c */
422 u32 itopoobain; /* 0xf70 */
423 u32 itopoobbin; /* 0xf74 */
424 u32 itopoobcin; /* 0xf78 */
425 u32 itopoobdin; /* 0xf7c */
427 u32 itopreset; /* 0xf90 */
429 u32 peripherialid4; /* 0xfd0 */
430 u32 peripherialid5; /* 0xfd4 */
431 u32 peripherialid6; /* 0xfd8 */
432 u32 peripherialid7; /* 0xfdc */
433 u32 peripherialid0; /* 0xfe0 */
434 u32 peripherialid1; /* 0xfe4 */
435 u32 peripherialid2; /* 0xfe8 */
436 u32 peripherialid3; /* 0xfec */
437 u32 componentid0; /* 0xff0 */
438 u32 componentid1; /* 0xff4 */
439 u32 componentid2; /* 0xff8 */
440 u32 componentid3; /* 0xffc */
444 ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
446 /* no cores found, bail out */
447 if (cc->bus->nr_cores == 0)
450 /* get chipcommon rev */
451 sii->pub.ccrev = cc->id.rev;
453 /* get chipcommon chipstatus */
454 sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus));
456 /* get chipcommon capabilites */
457 sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities));
459 /* get pmu rev and caps */
460 if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) {
461 sii->pub.pmucaps = bcma_read32(cc,
462 CHIPCREGOFFS(pmucapabilities));
463 sii->pub.pmurev = sii->pub.pmucaps & PCAP_REV_MASK;
469 static struct si_info *ai_doattach(struct si_info *sii,
470 struct bcma_bus *pbus)
472 struct si_pub *sih = &sii->pub;
473 struct bcma_device *cc;
476 sii->pcibus = pbus->host_pci;
478 /* switch to Chipcommon core */
479 cc = pbus->drv_cc.core;
481 sih->chip = pbus->chipinfo.id;
482 sih->chiprev = pbus->chipinfo.rev;
483 sih->chippkg = pbus->chipinfo.pkg;
484 sih->boardvendor = pbus->boardinfo.vendor;
485 sih->boardtype = pbus->boardinfo.type;
487 if (!ai_buscore_setup(sii, cc))
490 /* === NVRAM, clock is ready === */
491 bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0);
492 bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0);
494 /* PMU specific initializations */
495 if (ai_get_cccaps(sih) & CC_CAP_PMU) {
496 (void)si_pmu_measure_alpclk(sih);
507 * Allocate a si handle and do the attach.
510 ai_attach(struct bcma_bus *pbus)
514 /* alloc struct si_info */
515 sii = kzalloc(sizeof(struct si_info), GFP_ATOMIC);
519 if (ai_doattach(sii, pbus) == NULL) {
524 return (struct si_pub *) sii;
527 /* may be called with core in reset */
528 void ai_detach(struct si_pub *sih)
532 sii = container_of(sih, struct si_info, pub);
538 * read/modify chipcommon core register.
540 uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val)
542 struct bcma_device *cc;
546 sii = container_of(sih, struct si_info, pub);
547 cc = sii->icbus->drv_cc.core;
551 bcma_maskset32(cc, regoff, ~mask, val);
554 w = bcma_read32(cc, regoff);
559 /* return the slow clock source - LPO, XTAL, or PCI */
560 static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc)
566 * return the ILP (slowclock) min or max frequency
567 * precondition: we've established the chip has dynamic clk control
569 static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq,
570 struct bcma_device *cc)
574 /* Chipc rev 10 is InstaClock */
575 div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl));
576 div = 4 * ((div >> SYCC_CD_SHIFT) + 1);
577 return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div);
581 ai_clkctl_setdelay(struct si_pub *sih, struct bcma_device *cc)
583 uint slowmaxfreq, pll_delay, slowclk;
584 uint pll_on_delay, fref_sel_delay;
586 pll_delay = PLL_DELAY;
589 * If the slow clock is not sourced by the xtal then
590 * add the xtal_on_delay since the xtal will also be
591 * powered down by dynamic clk control logic.
594 slowclk = ai_slowclk_src(sih, cc);
595 if (slowclk != SCC_SS_XTAL)
596 pll_delay += XTAL_ON_DELAY;
598 /* Starting with 4318 it is ILP that is used for the delays */
600 ai_slowclk_freq(sih, false, cc);
602 pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
603 fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
605 bcma_write32(cc, CHIPCREGOFFS(pll_on_delay), pll_on_delay);
606 bcma_write32(cc, CHIPCREGOFFS(fref_sel_delay), fref_sel_delay);
609 /* initialize power control delay registers */
610 void ai_clkctl_init(struct si_pub *sih)
612 struct si_info *sii = container_of(sih, struct si_info, pub);
613 struct bcma_device *cc;
615 if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL))
618 cc = sii->icbus->drv_cc.core;
622 /* set all Instaclk chip ILP to 1 MHz */
623 bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK,
624 (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
626 ai_clkctl_setdelay(sih, cc);
630 * return the value suitable for writing to the
631 * dot11 core FAST_PWRUP_DELAY register
633 u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih)
636 struct bcma_device *cc;
640 sii = container_of(sih, struct si_info, pub);
641 if (ai_get_cccaps(sih) & CC_CAP_PMU) {
642 fpdelay = si_pmu_fast_pwrup_delay(sih);
646 if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL))
650 cc = sii->icbus->drv_cc.core;
652 slowminfreq = ai_slowclk_freq(sih, false, cc);
653 fpdelay = (((bcma_read32(cc, CHIPCREGOFFS(pll_on_delay)) + 2)
654 * 1000000) + (slowminfreq - 1)) / slowminfreq;
660 * clock control policy function throught chipcommon
662 * set dynamic clk control mode (forceslow, forcefast, dynamic)
663 * returns true if we are forcing fast clock
664 * this is a wrapper over the next internal function
665 * to allow flexible policy settings for outside caller
667 bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode)
670 struct bcma_device *cc;
672 sii = container_of(sih, struct si_info, pub);
674 cc = sii->icbus->drv_cc.core;
675 bcma_core_set_clockmode(cc, mode);
676 return mode == BCMA_CLKMODE_FAST;
679 /* Enable BT-COEX & Ex-PA for 4313 */
680 void ai_epa_4313war(struct si_pub *sih)
682 struct si_info *sii = container_of(sih, struct si_info, pub);
683 struct bcma_device *cc;
685 cc = sii->icbus->drv_cc.core;
688 bcma_set32(cc, CHIPCREGOFFS(gpiocontrol), GPIO_CTRL_EPA_EN_MASK);
691 /* check if the device is removed */
692 bool ai_deviceremoved(struct si_pub *sih)
697 sii = container_of(sih, struct si_info, pub);
699 if (sii->icbus->hosttype != BCMA_HOSTTYPE_PCI)
702 pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w);
703 if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM)