GNU Linux-libre 5.19-rc6-gnu

[releases.git] / drivers / net / wireless / ath / ath11k / rx_desc.h

/* SPDX-License-Identifier: BSD-3-Clause-Clear */
/*
 * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
 */
#ifndef ATH11K_RX_DESC_H
#define ATH11K_RX_DESC_H

enum rx_desc_rxpcu_filter {
        RX_DESC_RXPCU_FILTER_PASS,
        RX_DESC_RXPCU_FILTER_MONITOR_CLIENT,
        RX_DESC_RXPCU_FILTER_MONITOR_OTHER,
};

/* rxpcu_filter_pass
 *              This MPDU passed the normal frame filter programming of rxpcu.
 *
 * rxpcu_filter_monitor_client
 *               This MPDU did not pass the regular frame filter and would
 *               have been dropped, were it not for the frame fitting into the
 *               'monitor_client' category.
 *
 * rxpcu_filter_monitor_other
 *              This MPDU did not pass the regular frame filter and also did
 *              not pass the rxpcu_monitor_client filter. It would have been
 *              dropped accept that it did pass the 'monitor_other' category.
 */

#define RX_DESC_INFO0_RXPCU_MPDU_FITLER GENMASK(1, 0)
#define RX_DESC_INFO0_SW_FRAME_GRP_ID   GENMASK(8, 2)

enum rx_desc_sw_frame_grp_id {
        RX_DESC_SW_FRAME_GRP_ID_NDP_FRAME,
        RX_DESC_SW_FRAME_GRP_ID_MCAST_DATA,
        RX_DESC_SW_FRAME_GRP_ID_UCAST_DATA,
        RX_DESC_SW_FRAME_GRP_ID_NULL_DATA,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_0000,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_0001,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_0010,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_0011,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_0100,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_0101,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_0110,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_0111,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_1000,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_1001,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_1010,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_1011,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_1100,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_1101,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_1110,
        RX_DESC_SW_FRAME_GRP_ID_MGMT_1111,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_0000,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_0001,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_0010,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_0011,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_0100,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_0101,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_0110,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_0111,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_1000,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_1001,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_1010,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_1011,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_1100,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_1101,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_1110,
        RX_DESC_SW_FRAME_GRP_ID_CTRL_1111,
        RX_DESC_SW_FRAME_GRP_ID_UNSUPPORTED,
        RX_DESC_SW_FRAME_GRP_ID_PHY_ERR,
};

enum rx_desc_decap_type {
        RX_DESC_DECAP_TYPE_RAW,
        RX_DESC_DECAP_TYPE_NATIVE_WIFI,
        RX_DESC_DECAP_TYPE_ETHERNET2_DIX,
        RX_DESC_DECAP_TYPE_8023,
};

enum rx_desc_decrypt_status_code {
        RX_DESC_DECRYPT_STATUS_CODE_OK,
        RX_DESC_DECRYPT_STATUS_CODE_UNPROTECTED_FRAME,
        RX_DESC_DECRYPT_STATUS_CODE_DATA_ERR,
        RX_DESC_DECRYPT_STATUS_CODE_KEY_INVALID,
        RX_DESC_DECRYPT_STATUS_CODE_PEER_ENTRY_INVALID,
        RX_DESC_DECRYPT_STATUS_CODE_OTHER,
};

#define RX_ATTENTION_INFO1_FIRST_MPDU           BIT(0)
#define RX_ATTENTION_INFO1_RSVD_1A              BIT(1)
#define RX_ATTENTION_INFO1_MCAST_BCAST          BIT(2)
#define RX_ATTENTION_INFO1_AST_IDX_NOT_FOUND    BIT(3)
#define RX_ATTENTION_INFO1_AST_IDX_TIMEDOUT     BIT(4)
#define RX_ATTENTION_INFO1_POWER_MGMT           BIT(5)
#define RX_ATTENTION_INFO1_NON_QOS              BIT(6)
#define RX_ATTENTION_INFO1_NULL_DATA            BIT(7)
#define RX_ATTENTION_INFO1_MGMT_TYPE            BIT(8)
#define RX_ATTENTION_INFO1_CTRL_TYPE            BIT(9)
#define RX_ATTENTION_INFO1_MORE_DATA            BIT(10)
#define RX_ATTENTION_INFO1_EOSP                 BIT(11)
#define RX_ATTENTION_INFO1_A_MSDU_ERROR         BIT(12)
#define RX_ATTENTION_INFO1_FRAGMENT             BIT(13)
#define RX_ATTENTION_INFO1_ORDER                BIT(14)
#define RX_ATTENTION_INFO1_CCE_MATCH            BIT(15)
#define RX_ATTENTION_INFO1_OVERFLOW_ERR         BIT(16)
#define RX_ATTENTION_INFO1_MSDU_LEN_ERR         BIT(17)
#define RX_ATTENTION_INFO1_TCP_UDP_CKSUM_FAIL   BIT(18)
#define RX_ATTENTION_INFO1_IP_CKSUM_FAIL        BIT(19)
#define RX_ATTENTION_INFO1_SA_IDX_INVALID       BIT(20)
#define RX_ATTENTION_INFO1_DA_IDX_INVALID       BIT(21)
#define RX_ATTENTION_INFO1_RSVD_1B              BIT(22)
#define RX_ATTENTION_INFO1_RX_IN_TX_DECRYPT_BYP BIT(23)
#define RX_ATTENTION_INFO1_ENCRYPT_REQUIRED     BIT(24)
#define RX_ATTENTION_INFO1_DIRECTED             BIT(25)
#define RX_ATTENTION_INFO1_BUFFER_FRAGMENT      BIT(26)
#define RX_ATTENTION_INFO1_MPDU_LEN_ERR         BIT(27)
#define RX_ATTENTION_INFO1_TKIP_MIC_ERR         BIT(28)
#define RX_ATTENTION_INFO1_DECRYPT_ERR          BIT(29)
#define RX_ATTENTION_INFO1_UNDECRYPT_FRAME_ERR  BIT(30)
#define RX_ATTENTION_INFO1_FCS_ERR              BIT(31)

#define RX_ATTENTION_INFO2_FLOW_IDX_TIMEOUT     BIT(0)
#define RX_ATTENTION_INFO2_FLOW_IDX_INVALID     BIT(1)
#define RX_ATTENTION_INFO2_WIFI_PARSER_ERR      BIT(2)
#define RX_ATTENTION_INFO2_AMSDU_PARSER_ERR     BIT(3)
#define RX_ATTENTION_INFO2_SA_IDX_TIMEOUT       BIT(4)
#define RX_ATTENTION_INFO2_DA_IDX_TIMEOUT       BIT(5)
#define RX_ATTENTION_INFO2_MSDU_LIMIT_ERR       BIT(6)
#define RX_ATTENTION_INFO2_DA_IS_VALID          BIT(7)
#define RX_ATTENTION_INFO2_DA_IS_MCBC           BIT(8)
#define RX_ATTENTION_INFO2_SA_IS_VALID          BIT(9)
#define RX_ATTENTION_INFO2_DCRYPT_STATUS_CODE   GENMASK(12, 10)
#define RX_ATTENTION_INFO2_RX_BITMAP_NOT_UPDED  BIT(13)
#define RX_ATTENTION_INFO2_MSDU_DONE            BIT(31)

struct rx_attention {
        __le16 info0;
        __le16 phy_ppdu_id;
        __le32 info1;
        __le32 info2;
} __packed;

/* rx_attention
 *
 * rxpcu_mpdu_filter_in_category
 *              Field indicates what the reason was that this mpdu frame
 *              was allowed to come into the receive path by rxpcu. Values
 *              are defined in enum %RX_DESC_RXPCU_FILTER_*.
 *
 * sw_frame_group_id
 *              SW processes frames based on certain classifications. Values
 *              are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
 *
 * phy_ppdu_id
 *              A ppdu counter value that PHY increments for every PPDU
 *              received. The counter value wraps around.
 *
 * first_mpdu
 *              Indicates the first MSDU of the PPDU.  If both first_mpdu
 *              and last_mpdu are set in the MSDU then this is a not an
 *              A-MPDU frame but a stand alone MPDU.  Interior MPDU in an
 *              A-MPDU shall have both first_mpdu and last_mpdu bits set to
 *              0.  The PPDU start status will only be valid when this bit
 *              is set.
 *
 * mcast_bcast
 *              Multicast / broadcast indicator.  Only set when the MAC
 *              address 1 bit 0 is set indicating mcast/bcast and the BSSID
 *              matches one of the 4 BSSID registers. Only set when
 *              first_msdu is set.
 *
 * ast_index_not_found
 *              Only valid when first_msdu is set. Indicates no AST matching
 *              entries within the max search count.
 *
 * ast_index_timeout
 *              Only valid when first_msdu is set. Indicates an unsuccessful
 *              search in the address search table due to timeout.
 *
 * power_mgmt
 *              Power management bit set in the 802.11 header.  Only set
 *              when first_msdu is set.
 *
 * non_qos
 *              Set if packet is not a non-QoS data frame.  Only set when
 *              first_msdu is set.
 *
 * null_data
 *              Set if frame type indicates either null data or QoS null
 *              data format.  Only set when first_msdu is set.
 *
 * mgmt_type
 *              Set if packet is a management packet.  Only set when
 *              first_msdu is set.
 *
 * ctrl_type
 *              Set if packet is a control packet.  Only set when first_msdu
 *              is set.
 *
 * more_data
 *              Set if more bit in frame control is set.  Only set when
 *              first_msdu is set.
 *
 * eosp
 *              Set if the EOSP (end of service period) bit in the QoS
 *              control field is set.  Only set when first_msdu is set.
 *
 * a_msdu_error
 *              Set if number of MSDUs in A-MSDU is above a threshold or if the
 *              size of the MSDU is invalid. This receive buffer will contain
 *              all of the remainder of MSDUs in this MPDU w/o decapsulation.
 *
 * fragment
 *              Indicates that this is an 802.11 fragment frame.  This is
 *              set when either the more_frag bit is set in the frame
 *              control or the fragment number is not zero.  Only set when
 *              first_msdu is set.
 *
 * order
 *              Set if the order bit in the frame control is set.  Only set
 *              when first_msdu is set.
 *
 * cce_match
 *              Indicates that this status has a corresponding MSDU that
 *              requires FW processing. The OLE will have classification
 *              ring mask registers which will indicate the ring(s) for
 *              packets and descriptors which need FW attention.
 *
 * overflow_err
 *              PCU Receive FIFO does not have enough space to store the
 *              full receive packet.  Enough space is reserved in the
 *              receive FIFO for the status is written.  This MPDU remaining
 *              packets in the PPDU will be filtered and no Ack response
 *              will be transmitted.
 *
 * msdu_length_err
 *              Indicates that the MSDU length from the 802.3 encapsulated
 *              length field extends beyond the MPDU boundary.
 *
 * tcp_udp_chksum_fail
 *              Indicates that the computed checksum (tcp_udp_chksum) did
 *              not match the checksum in the TCP/UDP header.
 *
 * ip_chksum_fail
 *              Indicates that the computed checksum did not match the
 *              checksum in the IP header.
 *
 * sa_idx_invalid
 *              Indicates no matching entry was found in the address search
 *              table for the source MAC address.
 *
 * da_idx_invalid
 *              Indicates no matching entry was found in the address search
 *              table for the destination MAC address.
 *
 * rx_in_tx_decrypt_byp
 *              Indicates that RX packet is not decrypted as Crypto is busy
 *              with TX packet processing.
 *
 * encrypt_required
 *              Indicates that this data type frame is not encrypted even if
 *              the policy for this MPDU requires encryption as indicated in
 *              the peer table key type.
 *
 * directed
 *              MPDU is a directed packet which means that the RA matched
 *              our STA addresses.  In proxySTA it means that the TA matched
 *              an entry in our address search table with the corresponding
 *              'no_ack' bit is the address search entry cleared.
 *
 * buffer_fragment
 *              Indicates that at least one of the rx buffers has been
 *              fragmented.  If set the FW should look at the rx_frag_info
 *              descriptor described below.
 *
 * mpdu_length_err
 *              Indicates that the MPDU was pre-maturely terminated
 *              resulting in a truncated MPDU.  Don't trust the MPDU length
 *              field.
 *
 * tkip_mic_err
 *              Indicates that the MPDU Michael integrity check failed
 *
 * decrypt_err
 *              Indicates that the MPDU decrypt integrity check failed
 *
 * fcs_err
 *              Indicates that the MPDU FCS check failed
 *
 * flow_idx_timeout
 *              Indicates an unsuccessful flow search due to the expiring of
 *              the search timer.
 *
 * flow_idx_invalid
 *              flow id is not valid.
 *
 * amsdu_parser_error
 *              A-MSDU could not be properly de-agregated.
 *
 * sa_idx_timeout
 *              Indicates an unsuccessful search for the source MAC address
 *              due to the expiring of the search timer.
 *
 * da_idx_timeout
 *              Indicates an unsuccessful search for the destination MAC
 *              address due to the expiring of the search timer.
 *
 * msdu_limit_error
 *              Indicates that the MSDU threshold was exceeded and thus
 *              all the rest of the MSDUs will not be scattered and will not
 *              be decasulated but will be DMA'ed in RAW format as a single
 *              MSDU buffer.
 *
 * da_is_valid
 *              Indicates that OLE found a valid DA entry.
 *
 * da_is_mcbc
 *              Field Only valid if da_is_valid is set. Indicates the DA address
 *              was a Multicast or Broadcast address.
 *
 * sa_is_valid
 *              Indicates that OLE found a valid SA entry.
 *
 * decrypt_status_code
 *              Field provides insight into the decryption performed. Values are
 *              defined in enum %RX_DESC_DECRYPT_STATUS_CODE*.
 *
 * rx_bitmap_not_updated
 *              Frame is received, but RXPCU could not update the receive bitmap
 *              due to (temporary) fifo constraints.
 *
 * msdu_done
 *              If set indicates that the RX packet data, RX header data, RX
 *              PPDU start descriptor, RX MPDU start/end descriptor, RX MSDU
 *              start/end descriptors and RX Attention descriptor are all
 *              valid.  This bit must be in the last octet of the
 *              descriptor.
 */

#define RX_MPDU_START_INFO0_NDP_FRAME           BIT(9)
#define RX_MPDU_START_INFO0_PHY_ERR             BIT(10)
#define RX_MPDU_START_INFO0_PHY_ERR_MPDU_HDR    BIT(11)
#define RX_MPDU_START_INFO0_PROTO_VER_ERR       BIT(12)
#define RX_MPDU_START_INFO0_AST_LOOKUP_VALID    BIT(13)

#define RX_MPDU_START_INFO1_MPDU_FCTRL_VALID    BIT(0)
#define RX_MPDU_START_INFO1_MPDU_DUR_VALID      BIT(1)
#define RX_MPDU_START_INFO1_MAC_ADDR1_VALID     BIT(2)
#define RX_MPDU_START_INFO1_MAC_ADDR2_VALID     BIT(3)
#define RX_MPDU_START_INFO1_MAC_ADDR3_VALID     BIT(4)
#define RX_MPDU_START_INFO1_MAC_ADDR4_VALID     BIT(5)
#define RX_MPDU_START_INFO1_MPDU_SEQ_CTRL_VALID BIT(6)
#define RX_MPDU_START_INFO1_MPDU_QOS_CTRL_VALID BIT(7)
#define RX_MPDU_START_INFO1_MPDU_HT_CTRL_VALID  BIT(8)
#define RX_MPDU_START_INFO1_ENCRYPT_INFO_VALID  BIT(9)
#define RX_MPDU_START_INFO1_MPDU_FRAG_NUMBER    GENMASK(13, 10)
#define RX_MPDU_START_INFO1_MORE_FRAG_FLAG      BIT(14)
#define RX_MPDU_START_INFO1_FROM_DS             BIT(16)
#define RX_MPDU_START_INFO1_TO_DS               BIT(17)
#define RX_MPDU_START_INFO1_ENCRYPTED           BIT(18)
#define RX_MPDU_START_INFO1_MPDU_RETRY          BIT(19)
#define RX_MPDU_START_INFO1_MPDU_SEQ_NUM        GENMASK(31, 20)

#define RX_MPDU_START_INFO2_EPD_EN              BIT(0)
#define RX_MPDU_START_INFO2_ALL_FRAME_ENCPD     BIT(1)
#define RX_MPDU_START_INFO2_ENC_TYPE            GENMASK(5, 2)
#define RX_MPDU_START_INFO2_VAR_WEP_KEY_WIDTH   GENMASK(7, 6)
#define RX_MPDU_START_INFO2_MESH_STA            BIT(8)
#define RX_MPDU_START_INFO2_BSSID_HIT           BIT(9)
#define RX_MPDU_START_INFO2_BSSID_NUM           GENMASK(13, 10)
#define RX_MPDU_START_INFO2_TID                 GENMASK(17, 14)
#define RX_MPDU_START_INFO2_TID_WCN6855         GENMASK(18, 15)

#define RX_MPDU_START_INFO3_REO_DEST_IND                GENMASK(4, 0)
#define RX_MPDU_START_INFO3_FLOW_ID_TOEPLITZ            BIT(7)
#define RX_MPDU_START_INFO3_PKT_SEL_FP_UCAST_DATA       BIT(8)
#define RX_MPDU_START_INFO3_PKT_SEL_FP_MCAST_DATA       BIT(9)
#define RX_MPDU_START_INFO3_PKT_SEL_FP_CTRL_BAR         BIT(10)
#define RX_MPDU_START_INFO3_RXDMA0_SRC_RING_SEL         GENMASK(12, 11)
#define RX_MPDU_START_INFO3_RXDMA0_DST_RING_SEL         GENMASK(14, 13)

#define RX_MPDU_START_INFO4_REO_QUEUE_DESC_HI   GENMASK(7, 0)
#define RX_MPDU_START_INFO4_RECV_QUEUE_NUM      GENMASK(23, 8)
#define RX_MPDU_START_INFO4_PRE_DELIM_ERR_WARN  BIT(24)
#define RX_MPDU_START_INFO4_FIRST_DELIM_ERR     BIT(25)

#define RX_MPDU_START_INFO5_KEY_ID              GENMASK(7, 0)
#define RX_MPDU_START_INFO5_NEW_PEER_ENTRY      BIT(8)
#define RX_MPDU_START_INFO5_DECRYPT_NEEDED      BIT(9)
#define RX_MPDU_START_INFO5_DECAP_TYPE          GENMASK(11, 10)
#define RX_MPDU_START_INFO5_VLAN_TAG_C_PADDING  BIT(12)
#define RX_MPDU_START_INFO5_VLAN_TAG_S_PADDING  BIT(13)
#define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_C    BIT(14)
#define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_S    BIT(15)
#define RX_MPDU_START_INFO5_PRE_DELIM_COUNT     GENMASK(27, 16)
#define RX_MPDU_START_INFO5_AMPDU_FLAG          BIT(28)
#define RX_MPDU_START_INFO5_BAR_FRAME           BIT(29)

#define RX_MPDU_START_INFO6_MPDU_LEN            GENMASK(13, 0)
#define RX_MPDU_START_INFO6_FIRST_MPDU          BIT(14)
#define RX_MPDU_START_INFO6_MCAST_BCAST         BIT(15)
#define RX_MPDU_START_INFO6_AST_IDX_NOT_FOUND   BIT(16)
#define RX_MPDU_START_INFO6_AST_IDX_TIMEOUT     BIT(17)
#define RX_MPDU_START_INFO6_POWER_MGMT          BIT(18)
#define RX_MPDU_START_INFO6_NON_QOS             BIT(19)
#define RX_MPDU_START_INFO6_NULL_DATA           BIT(20)
#define RX_MPDU_START_INFO6_MGMT_TYPE           BIT(21)
#define RX_MPDU_START_INFO6_CTRL_TYPE           BIT(22)
#define RX_MPDU_START_INFO6_MORE_DATA           BIT(23)
#define RX_MPDU_START_INFO6_EOSP                BIT(24)
#define RX_MPDU_START_INFO6_FRAGMENT            BIT(25)
#define RX_MPDU_START_INFO6_ORDER               BIT(26)
#define RX_MPDU_START_INFO6_UAPSD_TRIGGER       BIT(27)
#define RX_MPDU_START_INFO6_ENCRYPT_REQUIRED    BIT(28)
#define RX_MPDU_START_INFO6_DIRECTED            BIT(29)

#define RX_MPDU_START_RAW_MPDU                  BIT(0)

struct rx_mpdu_start_ipq8074 {
        __le16 info0;
        __le16 phy_ppdu_id;
        __le16 ast_index;
        __le16 sw_peer_id;
        __le32 info1;
        __le32 info2;
        __le32 pn[4];
        __le32 peer_meta_data;
        __le32 info3;
        __le32 reo_queue_desc_lo;
        __le32 info4;
        __le32 info5;
        __le32 info6;
        __le16 frame_ctrl;
        __le16 duration;
        u8 addr1[ETH_ALEN];
        u8 addr2[ETH_ALEN];
        u8 addr3[ETH_ALEN];
        __le16 seq_ctrl;
        u8 addr4[ETH_ALEN];
        __le16 qos_ctrl;
        __le32 ht_ctrl;
        __le32 raw;
} __packed;

#define RX_MPDU_START_INFO7_REO_DEST_IND                GENMASK(4, 0)
#define RX_MPDU_START_INFO7_LMAC_PEER_ID_MSB            GENMASK(6, 5)
#define RX_MPDU_START_INFO7_FLOW_ID_TOEPLITZ            BIT(7)
#define RX_MPDU_START_INFO7_PKT_SEL_FP_UCAST_DATA       BIT(8)
#define RX_MPDU_START_INFO7_PKT_SEL_FP_MCAST_DATA       BIT(9)
#define RX_MPDU_START_INFO7_PKT_SEL_FP_CTRL_BAR         BIT(10)
#define RX_MPDU_START_INFO7_RXDMA0_SRC_RING_SEL         GENMASK(12, 11)
#define RX_MPDU_START_INFO7_RXDMA0_DST_RING_SEL         GENMASK(14, 13)

#define RX_MPDU_START_INFO8_REO_QUEUE_DESC_HI           GENMASK(7, 0)
#define RX_MPDU_START_INFO8_RECV_QUEUE_NUM              GENMASK(23, 8)
#define RX_MPDU_START_INFO8_PRE_DELIM_ERR_WARN          BIT(24)
#define RX_MPDU_START_INFO8_FIRST_DELIM_ERR             BIT(25)

#define RX_MPDU_START_INFO9_EPD_EN                      BIT(0)
#define RX_MPDU_START_INFO9_ALL_FRAME_ENCPD             BIT(1)
#define RX_MPDU_START_INFO9_ENC_TYPE                    GENMASK(5, 2)
#define RX_MPDU_START_INFO9_VAR_WEP_KEY_WIDTH           GENMASK(7, 6)
#define RX_MPDU_START_INFO9_MESH_STA                    GENMASK(9, 8)
#define RX_MPDU_START_INFO9_BSSID_HIT                   BIT(10)
#define RX_MPDU_START_INFO9_BSSID_NUM                   GENMASK(14, 11)
#define RX_MPDU_START_INFO9_TID                         GENMASK(18, 15)

#define RX_MPDU_START_INFO10_RXPCU_MPDU_FLTR            GENMASK(1, 0)
#define RX_MPDU_START_INFO10_SW_FRAME_GRP_ID            GENMASK(8, 2)
#define RX_MPDU_START_INFO10_NDP_FRAME                  BIT(9)
#define RX_MPDU_START_INFO10_PHY_ERR                    BIT(10)
#define RX_MPDU_START_INFO10_PHY_ERR_MPDU_HDR           BIT(11)
#define RX_MPDU_START_INFO10_PROTO_VER_ERR              BIT(12)
#define RX_MPDU_START_INFO10_AST_LOOKUP_VALID           BIT(13)

#define RX_MPDU_START_INFO11_MPDU_FCTRL_VALID           BIT(0)
#define RX_MPDU_START_INFO11_MPDU_DUR_VALID             BIT(1)
#define RX_MPDU_START_INFO11_MAC_ADDR1_VALID            BIT(2)
#define RX_MPDU_START_INFO11_MAC_ADDR2_VALID            BIT(3)
#define RX_MPDU_START_INFO11_MAC_ADDR3_VALID            BIT(4)
#define RX_MPDU_START_INFO11_MAC_ADDR4_VALID            BIT(5)
#define RX_MPDU_START_INFO11_MPDU_SEQ_CTRL_VALID        BIT(6)
#define RX_MPDU_START_INFO11_MPDU_QOS_CTRL_VALID        BIT(7)
#define RX_MPDU_START_INFO11_MPDU_HT_CTRL_VALID         BIT(8)
#define RX_MPDU_START_INFO11_ENCRYPT_INFO_VALID         BIT(9)
#define RX_MPDU_START_INFO11_MPDU_FRAG_NUMBER           GENMASK(13, 10)
#define RX_MPDU_START_INFO11_MORE_FRAG_FLAG             BIT(14)
#define RX_MPDU_START_INFO11_FROM_DS                    BIT(16)
#define RX_MPDU_START_INFO11_TO_DS                      BIT(17)
#define RX_MPDU_START_INFO11_ENCRYPTED                  BIT(18)
#define RX_MPDU_START_INFO11_MPDU_RETRY                 BIT(19)
#define RX_MPDU_START_INFO11_MPDU_SEQ_NUM               GENMASK(31, 20)

#define RX_MPDU_START_INFO12_KEY_ID                     GENMASK(7, 0)
#define RX_MPDU_START_INFO12_NEW_PEER_ENTRY             BIT(8)
#define RX_MPDU_START_INFO12_DECRYPT_NEEDED             BIT(9)
#define RX_MPDU_START_INFO12_DECAP_TYPE                 GENMASK(11, 10)
#define RX_MPDU_START_INFO12_VLAN_TAG_C_PADDING         BIT(12)
#define RX_MPDU_START_INFO12_VLAN_TAG_S_PADDING         BIT(13)
#define RX_MPDU_START_INFO12_STRIP_VLAN_TAG_C           BIT(14)
#define RX_MPDU_START_INFO12_STRIP_VLAN_TAG_S           BIT(15)
#define RX_MPDU_START_INFO12_PRE_DELIM_COUNT            GENMASK(27, 16)
#define RX_MPDU_START_INFO12_AMPDU_FLAG                 BIT(28)
#define RX_MPDU_START_INFO12_BAR_FRAME                  BIT(29)
#define RX_MPDU_START_INFO12_RAW_MPDU                   BIT(30)

#define RX_MPDU_START_INFO13_MPDU_LEN                   GENMASK(13, 0)
#define RX_MPDU_START_INFO13_FIRST_MPDU                 BIT(14)
#define RX_MPDU_START_INFO13_MCAST_BCAST                BIT(15)
#define RX_MPDU_START_INFO13_AST_IDX_NOT_FOUND          BIT(16)
#define RX_MPDU_START_INFO13_AST_IDX_TIMEOUT            BIT(17)
#define RX_MPDU_START_INFO13_POWER_MGMT                 BIT(18)
#define RX_MPDU_START_INFO13_NON_QOS                    BIT(19)
#define RX_MPDU_START_INFO13_NULL_DATA                  BIT(20)
#define RX_MPDU_START_INFO13_MGMT_TYPE                  BIT(21)
#define RX_MPDU_START_INFO13_CTRL_TYPE                  BIT(22)
#define RX_MPDU_START_INFO13_MORE_DATA                  BIT(23)
#define RX_MPDU_START_INFO13_EOSP                       BIT(24)
#define RX_MPDU_START_INFO13_FRAGMENT                   BIT(25)
#define RX_MPDU_START_INFO13_ORDER                      BIT(26)
#define RX_MPDU_START_INFO13_UAPSD_TRIGGER              BIT(27)
#define RX_MPDU_START_INFO13_ENCRYPT_REQUIRED           BIT(28)
#define RX_MPDU_START_INFO13_DIRECTED                   BIT(29)
#define RX_MPDU_START_INFO13_AMSDU_PRESENT              BIT(30)

struct rx_mpdu_start_qcn9074 {
        __le32 info7;
        __le32 reo_queue_desc_lo;
        __le32 info8;
        __le32 pn[4];
        __le32 info9;
        __le32 peer_meta_data;
        __le16 info10;
        __le16 phy_ppdu_id;
        __le16 ast_index;
        __le16 sw_peer_id;
        __le32 info11;
        __le32 info12;
        __le32 info13;
        __le16 frame_ctrl;
        __le16 duration;
        u8 addr1[ETH_ALEN];
        u8 addr2[ETH_ALEN];
        u8 addr3[ETH_ALEN];
        __le16 seq_ctrl;
        u8 addr4[ETH_ALEN];
        __le16 qos_ctrl;
        __le32 ht_ctrl;
} __packed;

struct rx_mpdu_start_wcn6855 {
        __le32 info3;
        __le32 reo_queue_desc_lo;
        __le32 info4;
        __le32 pn[4];
        __le32 info2;
        __le32 peer_meta_data;
        __le16 info0;
        __le16 phy_ppdu_id;
        __le16 ast_index;
        __le16 sw_peer_id;
        __le32 info1;
        __le32 info5;
        __le32 info6;
        __le16 frame_ctrl;
        __le16 duration;
        u8 addr1[ETH_ALEN];
        u8 addr2[ETH_ALEN];
        u8 addr3[ETH_ALEN];
        __le16 seq_ctrl;
        u8 addr4[ETH_ALEN];
        __le16 qos_ctrl;
        __le32 ht_ctrl;
} __packed;

/* rx_mpdu_start
 *
 * rxpcu_mpdu_filter_in_category
 *              Field indicates what the reason was that this mpdu frame
 *              was allowed to come into the receive path by rxpcu. Values
 *              are defined in enum %RX_DESC_RXPCU_FILTER_*.
 *              Note: for ndp frame, if it was expected because the preceding
 *              NDPA was filter_pass, the setting rxpcu_filter_pass will be
 *              used. This setting will also be used for every ndp frame in
 *              case Promiscuous mode is enabled.
 *
 * sw_frame_group_id
 *              SW processes frames based on certain classifications. Values
 *              are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
 *
 * ndp_frame
 *              Indicates that the received frame was an NDP frame.
 *
 * phy_err
 *              Indicates that PHY error was received before MAC received data.
 *
 * phy_err_during_mpdu_header
 *              PHY error was received before MAC received the complete MPDU
 *              header which was needed for proper decoding.
 *
 * protocol_version_err
 *              RXPCU detected a version error in the frame control field.
 *
 * ast_based_lookup_valid
 *              AST based lookup for this frame has found a valid result.
 *
 * phy_ppdu_id
 *              A ppdu counter value that PHY increments for every PPDU
 *              received. The counter value wraps around.
 *
 * ast_index
 *              This field indicates the index of the AST entry corresponding
 *              to this MPDU. It is provided by the GSE module instantiated in
 *              RXPCU. A value of 0xFFFF indicates an invalid AST index.
 *
 * sw_peer_id
 *              This field indicates a unique peer identifier. It is set equal
 *              to field 'sw_peer_id' from the AST entry.
 *
 * mpdu_frame_control_valid, mpdu_duration_valid, mpdu_qos_control_valid,
 * mpdu_ht_control_valid, frame_encryption_info_valid
 *              Indicates that each fields have valid entries.
 *
 * mac_addr_adx_valid
 *              Corresponding mac_addr_adx_{lo/hi} has valid entries.
 *
 * from_ds, to_ds
 *              Valid only when mpdu_frame_control_valid is set. Indicates that
 *              frame is received from DS and sent to DS.
 *
 * encrypted
 *              Protected bit from the frame control.
 *
 * mpdu_retry
 *              Retry bit from frame control. Only valid when first_msdu is set.
 *
 * mpdu_sequence_number
 *              The sequence number from the 802.11 header.
 *
 * epd_en
 *              If set, use EPD instead of LPD.
 *
 * all_frames_shall_be_encrypted
 *              If set, all frames (data only?) shall be encrypted. If not,
 *              RX CRYPTO shall set an error flag.
 *
 * encrypt_type
 *              Values are defined in enum %HAL_ENCRYPT_TYPE_.
 *
 * mesh_sta
 *              Indicates a Mesh (11s) STA.
 *
 * bssid_hit
 *               BSSID of the incoming frame matched one of the 8 BSSID
 *               register values.
 *
 * bssid_number
 *              This number indicates which one out of the 8 BSSID register
 *              values matched the incoming frame.
 *
 * tid
 *              TID field in the QoS control field
 *
 * pn
 *              The PN number.
 *
 * peer_meta_data
 *              Meta data that SW has programmed in the Peer table entry
 *              of the transmitting STA.
 *
 * rx_reo_queue_desc_addr_lo
 *              Address (lower 32 bits) of the REO queue descriptor.
 *
 * rx_reo_queue_desc_addr_hi
 *              Address (upper 8 bits) of the REO queue descriptor.
 *
 * receive_queue_number
 *              Indicates the MPDU queue ID to which this MPDU link
 *              descriptor belongs.
 *
 * pre_delim_err_warning
 *              Indicates that a delimiter FCS error was found in between the
 *              previous MPDU and this MPDU. Note that this is just a warning,
 *              and does not mean that this MPDU is corrupted in any way. If
 *              it is, there will be other errors indicated such as FCS or
 *              decrypt errors.
 *
 * first_delim_err
 *              Indicates that the first delimiter had a FCS failure.
 *
 * key_id
 *              The key ID octet from the IV.
 *
 * new_peer_entry
 *              Set if new RX_PEER_ENTRY TLV follows. If clear, RX_PEER_ENTRY
 *              doesn't follow so RX DECRYPTION module either uses old peer
 *              entry or not decrypt.
 *
 * decrypt_needed
 *              When RXPCU sets bit 'ast_index_not_found or ast_index_timeout',
 *              RXPCU will also ensure that this bit is NOT set. CRYPTO for that
 *              reason only needs to evaluate this bit and non of the other ones
 *
 * decap_type
 *              Used by the OLE during decapsulation. Values are defined in
 *              enum %MPDU_START_DECAP_TYPE_*.
 *
 * rx_insert_vlan_c_tag_padding
 * rx_insert_vlan_s_tag_padding
 *              Insert 4 byte of all zeros as VLAN tag or double VLAN tag if
 *              the rx payload does not have VLAN.
 *
 * strip_vlan_c_tag_decap
 * strip_vlan_s_tag_decap
 *              Strip VLAN or double VLAN during decapsulation.
 *
 * pre_delim_count
 *              The number of delimiters before this MPDU. Note that this
 *              number is cleared at PPDU start. If this MPDU is the first
 *              received MPDU in the PPDU and this MPDU gets filtered-in,
 *              this field will indicate the number of delimiters located
 *              after the last MPDU in the previous PPDU.
 *
 *              If this MPDU is located after the first received MPDU in
 *              an PPDU, this field will indicate the number of delimiters
 *              located between the previous MPDU and this MPDU.
 *
 * ampdu_flag
 *              Received frame was part of an A-MPDU.
 *
 * bar_frame
 *              Received frame is a BAR frame
 *
 * mpdu_length
 *              MPDU length before decapsulation.
 *
 * first_mpdu..directed
 *              See definition in RX attention descriptor
 *
 */

enum rx_msdu_start_pkt_type {
        RX_MSDU_START_PKT_TYPE_11A,
        RX_MSDU_START_PKT_TYPE_11B,
        RX_MSDU_START_PKT_TYPE_11N,
        RX_MSDU_START_PKT_TYPE_11AC,
        RX_MSDU_START_PKT_TYPE_11AX,
};

enum rx_msdu_start_sgi {
        RX_MSDU_START_SGI_0_8_US,
        RX_MSDU_START_SGI_0_4_US,
        RX_MSDU_START_SGI_1_6_US,
        RX_MSDU_START_SGI_3_2_US,
};

enum rx_msdu_start_recv_bw {
        RX_MSDU_START_RECV_BW_20MHZ,
        RX_MSDU_START_RECV_BW_40MHZ,
        RX_MSDU_START_RECV_BW_80MHZ,
        RX_MSDU_START_RECV_BW_160MHZ,
};

enum rx_msdu_start_reception_type {
        RX_MSDU_START_RECEPTION_TYPE_SU,
        RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO,
        RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA,
        RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO,
        RX_MSDU_START_RECEPTION_TYPE_UL_MU_MIMO,
        RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA,
        RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA_MIMO,
};

#define RX_MSDU_START_INFO1_MSDU_LENGTH         GENMASK(13, 0)
#define RX_MSDU_START_INFO1_RSVD_1A             BIT(14)
#define RX_MSDU_START_INFO1_IPSEC_ESP           BIT(15)
#define RX_MSDU_START_INFO1_L3_OFFSET           GENMASK(22, 16)
#define RX_MSDU_START_INFO1_IPSEC_AH            BIT(23)
#define RX_MSDU_START_INFO1_L4_OFFSET           GENMASK(31, 24)

#define RX_MSDU_START_INFO2_MSDU_NUMBER         GENMASK(7, 0)
#define RX_MSDU_START_INFO2_DECAP_TYPE          GENMASK(9, 8)
#define RX_MSDU_START_INFO2_IPV4                BIT(10)
#define RX_MSDU_START_INFO2_IPV6                BIT(11)
#define RX_MSDU_START_INFO2_TCP                 BIT(12)
#define RX_MSDU_START_INFO2_UDP                 BIT(13)
#define RX_MSDU_START_INFO2_IP_FRAG             BIT(14)
#define RX_MSDU_START_INFO2_TCP_ONLY_ACK        BIT(15)
#define RX_MSDU_START_INFO2_DA_IS_BCAST_MCAST   BIT(16)
#define RX_MSDU_START_INFO2_SELECTED_TOEPLITZ_HASH      GENMASK(18, 17)
#define RX_MSDU_START_INFO2_IP_FIXED_HDR_VALID          BIT(19)
#define RX_MSDU_START_INFO2_IP_EXTN_HDR_VALID           BIT(20)
#define RX_MSDU_START_INFO2_IP_TCP_UDP_HDR_VALID        BIT(21)
#define RX_MSDU_START_INFO2_MESH_CTRL_PRESENT           BIT(22)
#define RX_MSDU_START_INFO2_LDPC                        BIT(23)
#define RX_MSDU_START_INFO2_IP4_IP6_NXT_HDR             GENMASK(31, 24)
#define RX_MSDU_START_INFO2_DECAP_FORMAT                GENMASK(9, 8)

#define RX_MSDU_START_INFO3_USER_RSSI           GENMASK(7, 0)
#define RX_MSDU_START_INFO3_PKT_TYPE            GENMASK(11, 8)
#define RX_MSDU_START_INFO3_STBC                BIT(12)
#define RX_MSDU_START_INFO3_SGI                 GENMASK(14, 13)
#define RX_MSDU_START_INFO3_RATE_MCS            GENMASK(18, 15)
#define RX_MSDU_START_INFO3_RECV_BW             GENMASK(20, 19)
#define RX_MSDU_START_INFO3_RECEPTION_TYPE      GENMASK(23, 21)
#define RX_MSDU_START_INFO3_MIMO_SS_BITMAP      GENMASK(31, 24)

struct rx_msdu_start_ipq8074 {
        __le16 info0;
        __le16 phy_ppdu_id;
        __le32 info1;
        __le32 info2;
        __le32 toeplitz_hash;
        __le32 flow_id_toeplitz;
        __le32 info3;
        __le32 ppdu_start_timestamp;
        __le32 phy_meta_data;
} __packed;

struct rx_msdu_start_qcn9074 {
        __le16 info0;
        __le16 phy_ppdu_id;
        __le32 info1;
        __le32 info2;
        __le32 toeplitz_hash;
        __le32 flow_id_toeplitz;
        __le32 info3;
        __le32 ppdu_start_timestamp;
        __le32 phy_meta_data;
        __le16 vlan_ctag_c1;
        __le16 vlan_stag_c1;
} __packed;

struct rx_msdu_start_wcn6855 {
        __le16 info0;
        __le16 phy_ppdu_id;
        __le32 info1;
        __le32 info2;
        __le32 toeplitz_hash;
        __le32 flow_id_toeplitz;
        __le32 info3;
        __le32 ppdu_start_timestamp;
        __le32 phy_meta_data;
        __le16 vlan_ctag_ci;
        __le16 vlan_stag_ci;
} __packed;

/* rx_msdu_start
 *
 * rxpcu_mpdu_filter_in_category
 *              Field indicates what the reason was that this mpdu frame
 *              was allowed to come into the receive path by rxpcu. Values
 *              are defined in enum %RX_DESC_RXPCU_FILTER_*.
 *
 * sw_frame_group_id
 *              SW processes frames based on certain classifications. Values
 *              are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
 *
 * phy_ppdu_id
 *              A ppdu counter value that PHY increments for every PPDU
 *              received. The counter value wraps around.
 *
 * msdu_length
 *              MSDU length in bytes after decapsulation.
 *
 * ipsec_esp
 *              Set if IPv4/v6 packet is using IPsec ESP.
 *
 * l3_offset
 *              Depending upon mode bit, this field either indicates the
 *              L3 offset in bytes from the start of the RX_HEADER or the IP
 *              offset in bytes from the start of the packet after
 *              decapsulation. The latter is only valid if ipv4_proto or
 *              ipv6_proto is set.
 *
 * ipsec_ah
 *              Set if IPv4/v6 packet is using IPsec AH
 *
 * l4_offset
 *              Depending upon mode bit, this field either indicates the
 *              L4 offset nin bytes from the start of RX_HEADER (only valid
 *              if either ipv4_proto or ipv6_proto is set to 1) or indicates
 *              the offset in bytes to the start of TCP or UDP header from
 *              the start of the IP header after decapsulation (Only valid if
 *              tcp_proto or udp_proto is set). The value 0 indicates that
 *              the offset is longer than 127 bytes.
 *
 * msdu_number
 *              Indicates the MSDU number within a MPDU.  This value is
 *              reset to zero at the start of each MPDU.  If the number of
 *              MSDU exceeds 255 this number will wrap using modulo 256.
 *
 * decap_type
 *              Indicates the format after decapsulation. Values are defined in
 *              enum %MPDU_START_DECAP_TYPE_*.
 *
 * ipv4_proto
 *              Set if L2 layer indicates IPv4 protocol.
 *
 * ipv6_proto
 *              Set if L2 layer indicates IPv6 protocol.
 *
 * tcp_proto
 *              Set if the ipv4_proto or ipv6_proto are set and the IP protocol
 *              indicates TCP.
 *
 * udp_proto
 *              Set if the ipv4_proto or ipv6_proto are set and the IP protocol
 *              indicates UDP.
 *
 * ip_frag
 *              Indicates that either the IP More frag bit is set or IP frag
 *              number is non-zero.  If set indicates that this is a fragmented
 *              IP packet.
 *
 * tcp_only_ack
 *              Set if only the TCP Ack bit is set in the TCP flags and if
 *              the TCP payload is 0.
 *
 * da_is_bcast_mcast
 *              The destination address is broadcast or multicast.
 *
 * toeplitz_hash
 *              Actual chosen Hash.
 *              0 - Toeplitz hash of 2-tuple (IP source address, IP
 *                  destination address)
 *              1 - Toeplitz hash of 4-tuple (IP source address,
 *                  IP destination address, L4 (TCP/UDP) source port,
 *                  L4 (TCP/UDP) destination port)
 *              2 - Toeplitz of flow_id
 *              3 - Zero is used
 *
 * ip_fixed_header_valid
 *              Fixed 20-byte IPv4 header or 40-byte IPv6 header parsed
 *              fully within first 256 bytes of the packet
 *
 * ip_extn_header_valid
 *              IPv6/IPv6 header, including IPv4 options and
 *              recognizable extension headers parsed fully within first 256
 *              bytes of the packet
 *
 * tcp_udp_header_valid
 *              Fixed 20-byte TCP (excluding TCP options) or 8-byte UDP
 *              header parsed fully within first 256 bytes of the packet
 *
 * mesh_control_present
 *              When set, this MSDU includes the 'Mesh Control' field
 *
 * ldpc
 *
 * ip4_protocol_ip6_next_header
 *              For IPv4, this is the 8 bit protocol field set). For IPv6 this
 *              is the 8 bit next_header field.
 *
 * toeplitz_hash_2_or_4
 *              Controlled by RxOLE register - If register bit set to 0,
 *              Toeplitz hash is computed over 2-tuple IPv4 or IPv6 src/dest
 *              addresses; otherwise, toeplitz hash is computed over 4-tuple
 *              IPv4 or IPv6 src/dest addresses and src/dest ports.
 *
 * flow_id_toeplitz
 *              Toeplitz hash of 5-tuple
 *              {IP source address, IP destination address, IP source port, IP
 *              destination port, L4 protocol}  in case of non-IPSec.
 *
 *              In case of IPSec - Toeplitz hash of 4-tuple
 *              {IP source address, IP destination address, SPI, L4 protocol}
 *
 *              The relevant Toeplitz key registers are provided in RxOLE's
 *              instance of common parser module. These registers are separate
 *              from the Toeplitz keys used by ASE/FSE modules inside RxOLE.
 *              The actual value will be passed on from common parser module
 *              to RxOLE in one of the WHO_* TLVs.
 *
 * user_rssi
 *              RSSI for this user
 *
 * pkt_type
 *              Values are defined in enum %RX_MSDU_START_PKT_TYPE_*.
 *
 * stbc
 *              When set, use STBC transmission rates.
 *
 * sgi
 *              Field only valid when pkt type is HT, VHT or HE. Values are
 *              defined in enum %RX_MSDU_START_SGI_*.
 *
 * rate_mcs
 *              MCS Rate used.
 *
 * receive_bandwidth
 *              Full receive Bandwidth. Values are defined in enum
 *              %RX_MSDU_START_RECV_*.
 *
 * reception_type
 *              Indicates what type of reception this is and defined in enum
 *              %RX_MSDU_START_RECEPTION_TYPE_*.
 *
 * mimo_ss_bitmap
 *              Field only valid when
 *              Reception_type is RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO or
 *              RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO.
 *
 *              Bitmap, with each bit indicating if the related spatial
 *              stream is used for this STA
 *
 *              LSB related to SS 0
 *
 *              0 - spatial stream not used for this reception
 *              1 - spatial stream used for this reception
 *
 * ppdu_start_timestamp
 *              Timestamp that indicates when the PPDU that contained this MPDU
 *              started on the medium.
 *
 * phy_meta_data
 *              SW programmed Meta data provided by the PHY. Can be used for SW
 *              to indicate the channel the device is on.
 */

#define RX_MSDU_END_INFO0_RXPCU_MPDU_FITLER     GENMASK(1, 0)
#define RX_MSDU_END_INFO0_SW_FRAME_GRP_ID       GENMASK(8, 2)

#define RX_MSDU_END_INFO1_KEY_ID                GENMASK(7, 0)
#define RX_MSDU_END_INFO1_CCE_SUPER_RULE        GENMASK(13, 8)
#define RX_MSDU_END_INFO1_CCND_TRUNCATE         BIT(14)
#define RX_MSDU_END_INFO1_CCND_CCE_DIS          BIT(15)
#define RX_MSDU_END_INFO1_EXT_WAPI_PN           GENMASK(31, 16)

#define RX_MSDU_END_INFO2_REPORTED_MPDU_LEN     GENMASK(13, 0)
#define RX_MSDU_END_INFO2_FIRST_MSDU            BIT(14)
#define RX_MSDU_END_INFO2_FIRST_MSDU_WCN6855    BIT(28)
#define RX_MSDU_END_INFO2_LAST_MSDU             BIT(15)
#define RX_MSDU_END_INFO2_LAST_MSDU_WCN6855     BIT(29)
#define RX_MSDU_END_INFO2_SA_IDX_TIMEOUT        BIT(16)
#define RX_MSDU_END_INFO2_DA_IDX_TIMEOUT        BIT(17)
#define RX_MSDU_END_INFO2_MSDU_LIMIT_ERR        BIT(18)
#define RX_MSDU_END_INFO2_FLOW_IDX_TIMEOUT      BIT(19)
#define RX_MSDU_END_INFO2_FLOW_IDX_INVALID      BIT(20)
#define RX_MSDU_END_INFO2_WIFI_PARSER_ERR       BIT(21)
#define RX_MSDU_END_INFO2_AMSDU_PARSET_ERR      BIT(22)
#define RX_MSDU_END_INFO2_SA_IS_VALID           BIT(23)
#define RX_MSDU_END_INFO2_DA_IS_VALID           BIT(24)
#define RX_MSDU_END_INFO2_DA_IS_MCBC            BIT(25)
#define RX_MSDU_END_INFO2_L3_HDR_PADDING        GENMASK(27, 26)

#define RX_MSDU_END_INFO3_TCP_FLAG              GENMASK(8, 0)
#define RX_MSDU_END_INFO3_LRO_ELIGIBLE          BIT(9)

#define RX_MSDU_END_INFO4_DA_OFFSET             GENMASK(5, 0)
#define RX_MSDU_END_INFO4_SA_OFFSET             GENMASK(11, 6)
#define RX_MSDU_END_INFO4_DA_OFFSET_VALID       BIT(12)
#define RX_MSDU_END_INFO4_SA_OFFSET_VALID       BIT(13)
#define RX_MSDU_END_INFO4_L3_TYPE               GENMASK(31, 16)

#define RX_MSDU_END_INFO5_MSDU_DROP             BIT(0)
#define RX_MSDU_END_INFO5_REO_DEST_IND          GENMASK(5, 1)
#define RX_MSDU_END_INFO5_FLOW_IDX              GENMASK(25, 6)

struct rx_msdu_end_ipq8074 {
        __le16 info0;
        __le16 phy_ppdu_id;
        __le16 ip_hdr_cksum;
        __le16 tcp_udp_cksum;
        __le32 info1;
        __le32 ext_wapi_pn[2];
        __le32 info2;
        __le32 ipv6_options_crc;
        __le32 tcp_seq_num;
        __le32 tcp_ack_num;
        __le16 info3;
        __le16 window_size;
        __le32 info4;
        __le32 rule_indication[2];
        __le16 sa_idx;
        __le16 da_idx;
        __le32 info5;
        __le32 fse_metadata;
        __le16 cce_metadata;
        __le16 sa_sw_peer_id;
} __packed;

struct rx_msdu_end_wcn6855 {
        __le16 info0;
        __le16 phy_ppdu_id;
        __le16 ip_hdr_cksum;
        __le16 reported_mpdu_len;
        __le32 info1;
        __le32 ext_wapi_pn[2];
        __le32 info4;
        __le32 ipv6_options_crc;
        __le32 tcp_seq_num;
        __le32 tcp_ack_num;
        __le16 info3;
        __le16 window_size;
        __le32 info2;
        __le16 sa_idx;
        __le16 da_idx;
        __le32 info5;
        __le32 fse_metadata;
        __le16 cce_metadata;
        __le16 sa_sw_peer_id;
        __le32 rule_indication[2];
        __le32 info6;
        __le32 info7;
} __packed;

#define RX_MSDU_END_MPDU_LENGTH_INFO            GENMASK(13, 0)

#define RX_MSDU_END_INFO2_DA_OFFSET             GENMASK(5, 0)
#define RX_MSDU_END_INFO2_SA_OFFSET             GENMASK(11, 6)
#define RX_MSDU_END_INFO2_DA_OFFSET_VALID       BIT(12)
#define RX_MSDU_END_INFO2_SA_OFFSET_VALID       BIT(13)
#define RX_MSDU_END_INFO2_L3_TYPE               GENMASK(31, 16)

#define RX_MSDU_END_INFO4_SA_IDX_TIMEOUT        BIT(0)
#define RX_MSDU_END_INFO4_DA_IDX_TIMEOUT        BIT(1)
#define RX_MSDU_END_INFO4_MSDU_LIMIT_ERR        BIT(2)
#define RX_MSDU_END_INFO4_FLOW_IDX_TIMEOUT      BIT(3)
#define RX_MSDU_END_INFO4_FLOW_IDX_INVALID      BIT(4)
#define RX_MSDU_END_INFO4_WIFI_PARSER_ERR       BIT(5)
#define RX_MSDU_END_INFO4_AMSDU_PARSER_ERR      BIT(6)
#define RX_MSDU_END_INFO4_SA_IS_VALID           BIT(7)
#define RX_MSDU_END_INFO4_DA_IS_VALID           BIT(8)
#define RX_MSDU_END_INFO4_DA_IS_MCBC            BIT(9)
#define RX_MSDU_END_INFO4_L3_HDR_PADDING        GENMASK(11, 10)
#define RX_MSDU_END_INFO4_FIRST_MSDU            BIT(12)
#define RX_MSDU_END_INFO4_LAST_MSDU             BIT(13)

#define RX_MSDU_END_INFO6_AGGR_COUNT            GENMASK(7, 0)
#define RX_MSDU_END_INFO6_FLOW_AGGR_CONTN       BIT(8)
#define RX_MSDU_END_INFO6_FISA_TIMEOUT          BIT(9)

struct rx_msdu_end_qcn9074 {
        __le16 info0;
        __le16 phy_ppdu_id;
        __le16 ip_hdr_cksum;
        __le16 mpdu_length_info;
        __le32 info1;
        __le32 rule_indication[2];
        __le32 info2;
        __le32 ipv6_options_crc;
        __le32 tcp_seq_num;
        __le32 tcp_ack_num;
        __le16 info3;
        __le16 window_size;
        __le16 tcp_udp_cksum;
        __le16 info4;
        __le16 sa_idx;
        __le16 da_idx;
        __le32 info5;
        __le32 fse_metadata;
        __le16 cce_metadata;
        __le16 sa_sw_peer_id;
        __le32 info6;
        __le16 cum_l4_cksum;
        __le16 cum_ip_length;
} __packed;

/* rx_msdu_end
 *
 * rxpcu_mpdu_filter_in_category
 *              Field indicates what the reason was that this mpdu frame
 *              was allowed to come into the receive path by rxpcu. Values
 *              are defined in enum %RX_DESC_RXPCU_FILTER_*.
 *
 * sw_frame_group_id
 *              SW processes frames based on certain classifications. Values
 *              are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
 *
 * phy_ppdu_id
 *              A ppdu counter value that PHY increments for every PPDU
 *              received. The counter value wraps around.
 *
 * ip_hdr_cksum
 *              This can include the IP header checksum or the pseudo
 *              header checksum used by TCP/UDP checksum.
 *
 * tcp_udp_chksum
 *              The value of the computed TCP/UDP checksum.  A mode bit
 *              selects whether this checksum is the full checksum or the
 *              partial checksum which does not include the pseudo header.
 *
 * key_id
 *              The key ID octet from the IV. Only valid when first_msdu is set.
 *
 * cce_super_rule
 *              Indicates the super filter rule.
 *
 * cce_classify_not_done_truncate
 *              Classification failed due to truncated frame.
 *
 * cce_classify_not_done_cce_dis
 *              Classification failed due to CCE global disable
 *
 * ext_wapi_pn*
 *              Extension PN (packet number) which is only used by WAPI.
 *
 * reported_mpdu_length
 *              MPDU length before decapsulation. Only valid when first_msdu is
 *              set. This field is taken directly from the length field of the
 *              A-MPDU delimiter or the preamble length field for non-A-MPDU
 *              frames.
 *
 * first_msdu
 *              Indicates the first MSDU of A-MSDU. If both first_msdu and
 *              last_msdu are set in the MSDU then this is a non-aggregated MSDU
 *              frame: normal MPDU. Interior MSDU in an A-MSDU shall have both
 *              first_mpdu and last_mpdu bits set to 0.
 *
 * last_msdu
 *              Indicates the last MSDU of the A-MSDU. MPDU end status is only
 *              valid when last_msdu is set.
 *
 * sa_idx_timeout
 *              Indicates an unsuccessful MAC source address search due to the
 *              expiring of the search timer.
 *
 * da_idx_timeout
 *              Indicates an unsuccessful MAC destination address search due to
 *              the expiring of the search timer.
 *
 * msdu_limit_error
 *              Indicates that the MSDU threshold was exceeded and thus all the
 *              rest of the MSDUs will not be scattered and will not be
 *              decapsulated but will be DMA'ed in RAW format as a single MSDU.
 *
 * flow_idx_timeout
 *              Indicates an unsuccessful flow search due to the expiring of
 *              the search timer.
 *
 * flow_idx_invalid
 *              flow id is not valid.
 *
 * amsdu_parser_error
 *              A-MSDU could not be properly de-agregated.
 *
 * sa_is_valid
 *              Indicates that OLE found a valid SA entry.
 *
 * da_is_valid
 *              Indicates that OLE found a valid DA entry.
 *
 * da_is_mcbc
 *              Field Only valid if da_is_valid is set. Indicates the DA address
 *              was a Multicast of Broadcast address.
 *
 * l3_header_padding
 *              Number of bytes padded  to make sure that the L3 header will
 *              always start of a Dword boundary.
 *
 * ipv6_options_crc
 *              32 bit CRC computed out of  IP v6 extension headers.
 *
 * tcp_seq_number
 *              TCP sequence number.
 *
 * tcp_ack_number
 *              TCP acknowledge number.
 *
 * tcp_flag
 *              TCP flags {NS, CWR, ECE, URG, ACK, PSH, RST, SYN, FIN}.
 *
 * lro_eligible
 *              Computed out of TCP and IP fields to indicate that this
 *              MSDU is eligible for LRO.
 *
 * window_size
 *              TCP receive window size.
 *
 * da_offset
 *              Offset into MSDU buffer for DA.
 *
 * sa_offset
 *              Offset into MSDU buffer for SA.
 *
 * da_offset_valid
 *              da_offset field is valid. This will be set to 0 in case
 *              of a dynamic A-MSDU when DA is compressed.
 *
 * sa_offset_valid
 *              sa_offset field is valid. This will be set to 0 in case
 *              of a dynamic A-MSDU when SA is compressed.
 *
 * l3_type
 *              The 16-bit type value indicating the type of L3 later
 *              extracted from LLC/SNAP, set to zero if SNAP is not
 *              available.
 *
 * rule_indication
 *              Bitmap indicating which of rules have matched.
 *
 * sa_idx
 *              The offset in the address table which matches MAC source address
 *
 * da_idx
 *              The offset in the address table which matches MAC destination
 *              address.
 *
 * msdu_drop
 *              REO shall drop this MSDU and not forward it to any other ring.
 *
 * reo_destination_indication
 *              The id of the reo exit ring where the msdu frame shall push
 *              after (MPDU level) reordering has finished. Values are defined
 *              in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
 *
 * flow_idx
 *              Flow table index.
 *
 * fse_metadata
 *              FSE related meta data.
 *
 * cce_metadata
 *              CCE related meta data.
 *
 * sa_sw_peer_id
 *              sw_peer_id from the address search entry corresponding to the
 *              source address of the MSDU.
 */

enum rx_mpdu_end_rxdma_dest_ring {
        RX_MPDU_END_RXDMA_DEST_RING_RELEASE,
        RX_MPDU_END_RXDMA_DEST_RING_FW,
        RX_MPDU_END_RXDMA_DEST_RING_SW,
        RX_MPDU_END_RXDMA_DEST_RING_REO,
};

#define RX_MPDU_END_INFO1_UNSUP_KTYPE_SHORT_FRAME       BIT(11)
#define RX_MPDU_END_INFO1_RX_IN_TX_DECRYPT_BYT          BIT(12)
#define RX_MPDU_END_INFO1_OVERFLOW_ERR                  BIT(13)
#define RX_MPDU_END_INFO1_MPDU_LEN_ERR                  BIT(14)
#define RX_MPDU_END_INFO1_TKIP_MIC_ERR                  BIT(15)
#define RX_MPDU_END_INFO1_DECRYPT_ERR                   BIT(16)
#define RX_MPDU_END_INFO1_UNENCRYPTED_FRAME_ERR         BIT(17)
#define RX_MPDU_END_INFO1_PN_FIELDS_VALID               BIT(18)
#define RX_MPDU_END_INFO1_FCS_ERR                       BIT(19)
#define RX_MPDU_END_INFO1_MSDU_LEN_ERR                  BIT(20)
#define RX_MPDU_END_INFO1_RXDMA0_DEST_RING              GENMASK(22, 21)
#define RX_MPDU_END_INFO1_RXDMA1_DEST_RING              GENMASK(24, 23)
#define RX_MPDU_END_INFO1_DECRYPT_STATUS_CODE           GENMASK(27, 25)
#define RX_MPDU_END_INFO1_RX_BITMAP_NOT_UPD             BIT(28)

struct rx_mpdu_end {
        __le16 info0;
        __le16 phy_ppdu_id;
        __le32 info1;
} __packed;

/* rx_mpdu_end
 *
 * rxpcu_mpdu_filter_in_category
 *              Field indicates what the reason was that this mpdu frame
 *              was allowed to come into the receive path by rxpcu. Values
 *              are defined in enum %RX_DESC_RXPCU_FILTER_*.
 *
 * sw_frame_group_id
 *              SW processes frames based on certain classifications. Values
 *              are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
 *
 * phy_ppdu_id
 *              A ppdu counter value that PHY increments for every PPDU
 *              received. The counter value wraps around.
 *
 * unsup_ktype_short_frame
 *              This bit will be '1' when WEP or TKIP or WAPI key type is
 *              received for 11ah short frame. Crypto will bypass the received
 *              packet without decryption to RxOLE after setting this bit.
 *
 * rx_in_tx_decrypt_byp
 *              Indicates that RX packet is not decrypted as Crypto is
 *              busy with TX packet processing.
 *
 * overflow_err
 *              RXPCU Receive FIFO ran out of space to receive the full MPDU.
 *              Therefore this MPDU is terminated early and is thus corrupted.
 *
 *              This MPDU will not be ACKed.
 *
 *              RXPCU might still be able to correctly receive the following
 *              MPDUs in the PPDU if enough fifo space became available in time.
 *
 * mpdu_length_err
 *              Set by RXPCU if the expected MPDU length does not correspond
 *              with the actually received number of bytes in the MPDU.
 *
 * tkip_mic_err
 *              Set by Rx crypto when crypto detected a TKIP MIC error for
 *              this MPDU.
 *
 * decrypt_err
 *              Set by RX CRYPTO when CRYPTO detected a decrypt error for this
 *              MPDU or CRYPTO received an encrypted frame, but did not get a
 *              valid corresponding key id in the peer entry.
 *
 * unencrypted_frame_err
 *              Set by RX CRYPTO when CRYPTO detected an unencrypted frame while
 *              in the peer entry field 'All_frames_shall_be_encrypted' is set.
 *
 * pn_fields_contain_valid_info
 *              Set by RX CRYPTO to indicate that there is a valid PN field
 *              present in this MPDU.
 *
 * fcs_err
 *              Set by RXPCU when there is an FCS error detected for this MPDU.
 *
 * msdu_length_err
 *              Set by RXOLE when there is an msdu length error detected
 *              in at least 1 of the MSDUs embedded within the MPDU.
 *
 * rxdma0_destination_ring
 * rxdma1_destination_ring
 *              The ring to which RXDMA0/1 shall push the frame, assuming
 *              no MPDU level errors are detected. In case of MPDU level
 *              errors, RXDMA0/1 might change the RXDMA0/1 destination. Values
 *              are defined in %enum RX_MPDU_END_RXDMA_DEST_RING_*.
 *
 * decrypt_status_code
 *              Field provides insight into the decryption performed. Values
 *              are defined in enum %RX_DESC_DECRYPT_STATUS_CODE_*.
 *
 * rx_bitmap_not_updated
 *              Frame is received, but RXPCU could not update the receive bitmap
 *              due to (temporary) fifo constraints.
 */

/* Padding bytes to avoid TLV's spanning across 128 byte boundary */
#define HAL_RX_DESC_PADDING0_BYTES      4
#define HAL_RX_DESC_PADDING1_BYTES      16

#define HAL_RX_DESC_HDR_STATUS_LEN      120

struct hal_rx_desc_ipq8074 {
        __le32 msdu_end_tag;
        struct rx_msdu_end_ipq8074 msdu_end;
        __le32 rx_attn_tag;
        struct rx_attention attention;
        __le32 msdu_start_tag;
        struct rx_msdu_start_ipq8074 msdu_start;
        u8 rx_padding0[HAL_RX_DESC_PADDING0_BYTES];
        __le32 mpdu_start_tag;
        struct rx_mpdu_start_ipq8074 mpdu_start;
        __le32 mpdu_end_tag;
        struct rx_mpdu_end mpdu_end;
        u8 rx_padding1[HAL_RX_DESC_PADDING1_BYTES];
        __le32 hdr_status_tag;
        __le32 phy_ppdu_id;
        u8 hdr_status[HAL_RX_DESC_HDR_STATUS_LEN];
        u8 msdu_payload[];
} __packed;

struct hal_rx_desc_qcn9074 {
        __le32 msdu_end_tag;
        struct rx_msdu_end_qcn9074 msdu_end;
        __le32 rx_attn_tag;
        struct rx_attention attention;
        __le32 msdu_start_tag;
        struct rx_msdu_start_qcn9074 msdu_start;
        u8 rx_padding0[HAL_RX_DESC_PADDING0_BYTES];
        __le32 mpdu_start_tag;
        struct rx_mpdu_start_qcn9074 mpdu_start;
        __le32 mpdu_end_tag;
        struct rx_mpdu_end mpdu_end;
        u8 rx_padding1[HAL_RX_DESC_PADDING1_BYTES];
        __le32 hdr_status_tag;
        __le32 phy_ppdu_id;
        u8 hdr_status[HAL_RX_DESC_HDR_STATUS_LEN];
        u8 msdu_payload[];
} __packed;

struct hal_rx_desc_wcn6855 {
        __le32 msdu_end_tag;
        struct rx_msdu_end_wcn6855 msdu_end;
        __le32 rx_attn_tag;
        struct rx_attention attention;
        __le32 msdu_start_tag;
        struct rx_msdu_start_wcn6855 msdu_start;
        u8 rx_padding0[HAL_RX_DESC_PADDING0_BYTES];
        __le32 mpdu_start_tag;
        struct rx_mpdu_start_wcn6855 mpdu_start;
        __le32 mpdu_end_tag;
        struct rx_mpdu_end mpdu_end;
        u8 rx_padding1[HAL_RX_DESC_PADDING1_BYTES];
        __le32 hdr_status_tag;
        __le32 phy_ppdu_id;
        u8 hdr_status[HAL_RX_DESC_HDR_STATUS_LEN];
        u8 msdu_payload[];
} __packed;

struct hal_rx_desc {
        union {
                struct hal_rx_desc_ipq8074 ipq8074;
                struct hal_rx_desc_qcn9074 qcn9074;
                struct hal_rx_desc_wcn6855 wcn6855;
        } u;
} __packed;

#define HAL_RX_RU_ALLOC_TYPE_MAX 6
#define RU_26  1
#define RU_52  2
#define RU_106 4
#define RU_242 9
#define RU_484 18
#define RU_996 37

#endif /* ATH11K_RX_DESC_H */