drivers/net/wireless/ath/ath10k/wmi.h

   1 /* SPDX-License-Identifier: ISC */
   2 /*
   3  * Copyright (c) 2005-2011 Atheros Communications Inc.
   4  * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
   5  * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
   6  */
   7
   8 #ifndef _WMI_H_
   9 #define _WMI_H_
  10
  11 #include <linux/types.h>
  12 #include <linux/ieee80211.h>
  13
  14 /*
  15  * This file specifies the WMI interface for the Unified Software
  16  * Architecture.
  17  *
  18  * It includes definitions of all the commands and events. Commands are
  19  * messages from the host to the target. Events and Replies are messages
  20  * from the target to the host.
  21  *
  22  * Ownership of correctness in regards to WMI commands belongs to the host
  23  * driver and the target is not required to validate parameters for value,
  24  * proper range, or any other checking.
  25  *
  26  * Guidelines for extending this interface are below.
  27  *
  28  * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
  29  *
  30  * 2. Use ONLY u32 type for defining member variables within WMI
  31  *    command/event structures. Do not use u8, u16, bool or
  32  *    enum types within these structures.
  33  *
  34  * 3. DO NOT define bit fields within structures. Implement bit fields
  35  *    using masks if necessary. Do not use the programming language's bit
  36  *    field definition.
  37  *
  38  * 4. Define macros for encode/decode of u8, u16 fields within
  39  *    the u32 variables. Use these macros for set/get of these fields.
  40  *    Try to use this to optimize the structure without bloating it with
  41  *    u32 variables for every lower sized field.
  42  *
  43  * 5. Do not use PACK/UNPACK attributes for the structures as each member
  44  *    variable is already 4-byte aligned by virtue of being a u32
  45  *    type.
  46  *
  47  * 6. Comment each parameter part of the WMI command/event structure by
  48  *    using the 2 stars at the beginning of C comment instead of one star to
  49  *    enable HTML document generation using Doxygen.
  50  *
  51  */
  52
  53 /* Control Path */
  54 struct wmi_cmd_hdr {
  55         __le32 cmd_id;
  56 } __packed;
  57
  58 #define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF
  59 #define WMI_CMD_HDR_CMD_ID_LSB    0
  60 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
  61 #define WMI_CMD_HDR_PLT_PRIV_LSB  24
  62
  63 #define HTC_PROTOCOL_VERSION    0x0002
  64 #define WMI_PROTOCOL_VERSION    0x0002
  65
  66 /*
  67  * There is no signed version of __le32, so for a temporary solution come
  68  * up with our own version. The idea is from fs/ntfs/endian.h.
  69  *
  70  * Use a_ prefix so that it doesn't conflict if we get proper support to
  71  * linux/types.h.
  72  */
  73 typedef __s32 __bitwise a_sle32;
  74
  75 static inline a_sle32 a_cpu_to_sle32(s32 val)
  76 {
  77         return (__force a_sle32)cpu_to_le32(val);
  78 }
  79
  80 static inline s32 a_sle32_to_cpu(a_sle32 val)
  81 {
  82         return le32_to_cpu((__force __le32)val);
  83 }
  84
  85 enum wmi_service {
  86         WMI_SERVICE_BEACON_OFFLOAD = 0,
  87         WMI_SERVICE_SCAN_OFFLOAD,
  88         WMI_SERVICE_ROAM_OFFLOAD,
  89         WMI_SERVICE_BCN_MISS_OFFLOAD,
  90         WMI_SERVICE_STA_PWRSAVE,
  91         WMI_SERVICE_STA_ADVANCED_PWRSAVE,
  92         WMI_SERVICE_AP_UAPSD,
  93         WMI_SERVICE_AP_DFS,
  94         WMI_SERVICE_11AC,
  95         WMI_SERVICE_BLOCKACK,
  96         WMI_SERVICE_PHYERR,
  97         WMI_SERVICE_BCN_FILTER,
  98         WMI_SERVICE_RTT,
  99         WMI_SERVICE_RATECTRL,
 100         WMI_SERVICE_WOW,
 101         WMI_SERVICE_RATECTRL_CACHE,
 102         WMI_SERVICE_IRAM_TIDS,
 103         WMI_SERVICE_ARPNS_OFFLOAD,
 104         WMI_SERVICE_NLO,
 105         WMI_SERVICE_GTK_OFFLOAD,
 106         WMI_SERVICE_SCAN_SCH,
 107         WMI_SERVICE_CSA_OFFLOAD,
 108         WMI_SERVICE_CHATTER,
 109         WMI_SERVICE_COEX_FREQAVOID,
 110         WMI_SERVICE_PACKET_POWER_SAVE,
 111         WMI_SERVICE_FORCE_FW_HANG,
 112         WMI_SERVICE_GPIO,
 113         WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 114         WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 115         WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 116         WMI_SERVICE_STA_KEEP_ALIVE,
 117         WMI_SERVICE_TX_ENCAP,
 118         WMI_SERVICE_BURST,
 119         WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 120         WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 121         WMI_SERVICE_ROAM_SCAN_OFFLOAD,
 122         WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 123         WMI_SERVICE_EARLY_RX,
 124         WMI_SERVICE_STA_SMPS,
 125         WMI_SERVICE_FWTEST,
 126         WMI_SERVICE_STA_WMMAC,
 127         WMI_SERVICE_TDLS,
 128         WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
 129         WMI_SERVICE_ADAPTIVE_OCS,
 130         WMI_SERVICE_BA_SSN_SUPPORT,
 131         WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
 132         WMI_SERVICE_WLAN_HB,
 133         WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
 134         WMI_SERVICE_BATCH_SCAN,
 135         WMI_SERVICE_QPOWER,
 136         WMI_SERVICE_PLMREQ,
 137         WMI_SERVICE_THERMAL_MGMT,
 138         WMI_SERVICE_RMC,
 139         WMI_SERVICE_MHF_OFFLOAD,
 140         WMI_SERVICE_COEX_SAR,
 141         WMI_SERVICE_BCN_TXRATE_OVERRIDE,
 142         WMI_SERVICE_NAN,
 143         WMI_SERVICE_L1SS_STAT,
 144         WMI_SERVICE_ESTIMATE_LINKSPEED,
 145         WMI_SERVICE_OBSS_SCAN,
 146         WMI_SERVICE_TDLS_OFFCHAN,
 147         WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
 148         WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
 149         WMI_SERVICE_IBSS_PWRSAVE,
 150         WMI_SERVICE_LPASS,
 151         WMI_SERVICE_EXTSCAN,
 152         WMI_SERVICE_D0WOW,
 153         WMI_SERVICE_HSOFFLOAD,
 154         WMI_SERVICE_ROAM_HO_OFFLOAD,
 155         WMI_SERVICE_RX_FULL_REORDER,
 156         WMI_SERVICE_DHCP_OFFLOAD,
 157         WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
 158         WMI_SERVICE_MDNS_OFFLOAD,
 159         WMI_SERVICE_SAP_AUTH_OFFLOAD,
 160         WMI_SERVICE_ATF,
 161         WMI_SERVICE_COEX_GPIO,
 162         WMI_SERVICE_ENHANCED_PROXY_STA,
 163         WMI_SERVICE_TT,
 164         WMI_SERVICE_PEER_CACHING,
 165         WMI_SERVICE_AUX_SPECTRAL_INTF,
 166         WMI_SERVICE_AUX_CHAN_LOAD_INTF,
 167         WMI_SERVICE_BSS_CHANNEL_INFO_64,
 168         WMI_SERVICE_EXT_RES_CFG_SUPPORT,
 169         WMI_SERVICE_MESH_11S,
 170         WMI_SERVICE_MESH_NON_11S,
 171         WMI_SERVICE_PEER_STATS,
 172         WMI_SERVICE_RESTRT_CHNL_SUPPORT,
 173         WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 174         WMI_SERVICE_TX_MODE_PUSH_ONLY,
 175         WMI_SERVICE_TX_MODE_PUSH_PULL,
 176         WMI_SERVICE_TX_MODE_DYNAMIC,
 177         WMI_SERVICE_VDEV_RX_FILTER,
 178         WMI_SERVICE_BTCOEX,
 179         WMI_SERVICE_CHECK_CAL_VERSION,
 180         WMI_SERVICE_DBGLOG_WARN2,
 181         WMI_SERVICE_BTCOEX_DUTY_CYCLE,
 182         WMI_SERVICE_4_WIRE_COEX_SUPPORT,
 183         WMI_SERVICE_EXTENDED_NSS_SUPPORT,
 184         WMI_SERVICE_PROG_GPIO_BAND_SELECT,
 185         WMI_SERVICE_SMART_LOGGING_SUPPORT,
 186         WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 187         WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 188         WMI_SERVICE_MGMT_TX_WMI,
 189         WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
 190         WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 191         WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
 192         WMI_SERVICE_TPC_STATS_FINAL,
 193         WMI_SERVICE_RESET_CHIP,
 194         WMI_SERVICE_SPOOF_MAC_SUPPORT,
 195         WMI_SERVICE_TX_DATA_ACK_RSSI,
 196         WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 197         WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 198         WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 199         WMI_SERVICE_THERM_THROT,
 200         WMI_SERVICE_RTT_RESPONDER_ROLE,
 201         WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
 202         WMI_SERVICE_REPORT_AIRTIME,
 203         WMI_SERVICE_SYNC_DELETE_CMDS,
 204         WMI_SERVICE_TX_PWR_PER_PEER,
 205         WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
 206         WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 207         WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 208
 209         /* Remember to add the new value to wmi_service_name()! */
 210
 211         /* keep last */
 212         WMI_SERVICE_MAX,
 213 };
 214
 215 enum wmi_10x_service {
 216         WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
 217         WMI_10X_SERVICE_SCAN_OFFLOAD,
 218         WMI_10X_SERVICE_ROAM_OFFLOAD,
 219         WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 220         WMI_10X_SERVICE_STA_PWRSAVE,
 221         WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 222         WMI_10X_SERVICE_AP_UAPSD,
 223         WMI_10X_SERVICE_AP_DFS,
 224         WMI_10X_SERVICE_11AC,
 225         WMI_10X_SERVICE_BLOCKACK,
 226         WMI_10X_SERVICE_PHYERR,
 227         WMI_10X_SERVICE_BCN_FILTER,
 228         WMI_10X_SERVICE_RTT,
 229         WMI_10X_SERVICE_RATECTRL,
 230         WMI_10X_SERVICE_WOW,
 231         WMI_10X_SERVICE_RATECTRL_CACHE,
 232         WMI_10X_SERVICE_IRAM_TIDS,
 233         WMI_10X_SERVICE_BURST,
 234
 235         /* introduced in 10.2 */
 236         WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 237         WMI_10X_SERVICE_FORCE_FW_HANG,
 238         WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 239         WMI_10X_SERVICE_ATF,
 240         WMI_10X_SERVICE_COEX_GPIO,
 241         WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
 242         WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
 243         WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 244         WMI_10X_SERVICE_MESH,
 245         WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 246         WMI_10X_SERVICE_PEER_STATS,
 247         WMI_10X_SERVICE_RESET_CHIP,
 248         WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 249         WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
 250         WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
 251         WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 252 };
 253
 254 enum wmi_main_service {
 255         WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
 256         WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 257         WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 258         WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 259         WMI_MAIN_SERVICE_STA_PWRSAVE,
 260         WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 261         WMI_MAIN_SERVICE_AP_UAPSD,
 262         WMI_MAIN_SERVICE_AP_DFS,
 263         WMI_MAIN_SERVICE_11AC,
 264         WMI_MAIN_SERVICE_BLOCKACK,
 265         WMI_MAIN_SERVICE_PHYERR,
 266         WMI_MAIN_SERVICE_BCN_FILTER,
 267         WMI_MAIN_SERVICE_RTT,
 268         WMI_MAIN_SERVICE_RATECTRL,
 269         WMI_MAIN_SERVICE_WOW,
 270         WMI_MAIN_SERVICE_RATECTRL_CACHE,
 271         WMI_MAIN_SERVICE_IRAM_TIDS,
 272         WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 273         WMI_MAIN_SERVICE_NLO,
 274         WMI_MAIN_SERVICE_GTK_OFFLOAD,
 275         WMI_MAIN_SERVICE_SCAN_SCH,
 276         WMI_MAIN_SERVICE_CSA_OFFLOAD,
 277         WMI_MAIN_SERVICE_CHATTER,
 278         WMI_MAIN_SERVICE_COEX_FREQAVOID,
 279         WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 280         WMI_MAIN_SERVICE_FORCE_FW_HANG,
 281         WMI_MAIN_SERVICE_GPIO,
 282         WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 283         WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 284         WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 285         WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 286         WMI_MAIN_SERVICE_TX_ENCAP,
 287 };
 288
 289 enum wmi_10_4_service {
 290         WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
 291         WMI_10_4_SERVICE_SCAN_OFFLOAD,
 292         WMI_10_4_SERVICE_ROAM_OFFLOAD,
 293         WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 294         WMI_10_4_SERVICE_STA_PWRSAVE,
 295         WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 296         WMI_10_4_SERVICE_AP_UAPSD,
 297         WMI_10_4_SERVICE_AP_DFS,
 298         WMI_10_4_SERVICE_11AC,
 299         WMI_10_4_SERVICE_BLOCKACK,
 300         WMI_10_4_SERVICE_PHYERR,
 301         WMI_10_4_SERVICE_BCN_FILTER,
 302         WMI_10_4_SERVICE_RTT,
 303         WMI_10_4_SERVICE_RATECTRL,
 304         WMI_10_4_SERVICE_WOW,
 305         WMI_10_4_SERVICE_RATECTRL_CACHE,
 306         WMI_10_4_SERVICE_IRAM_TIDS,
 307         WMI_10_4_SERVICE_BURST,
 308         WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 309         WMI_10_4_SERVICE_GTK_OFFLOAD,
 310         WMI_10_4_SERVICE_SCAN_SCH,
 311         WMI_10_4_SERVICE_CSA_OFFLOAD,
 312         WMI_10_4_SERVICE_CHATTER,
 313         WMI_10_4_SERVICE_COEX_FREQAVOID,
 314         WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 315         WMI_10_4_SERVICE_FORCE_FW_HANG,
 316         WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 317         WMI_10_4_SERVICE_GPIO,
 318         WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 319         WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 320         WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 321         WMI_10_4_SERVICE_TX_ENCAP,
 322         WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 323         WMI_10_4_SERVICE_EARLY_RX,
 324         WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 325         WMI_10_4_SERVICE_TT,
 326         WMI_10_4_SERVICE_ATF,
 327         WMI_10_4_SERVICE_PEER_CACHING,
 328         WMI_10_4_SERVICE_COEX_GPIO,
 329         WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 330         WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 331         WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 332         WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 333         WMI_10_4_SERVICE_MESH_NON_11S,
 334         WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
 335         WMI_10_4_SERVICE_PEER_STATS,
 336         WMI_10_4_SERVICE_MESH_11S,
 337         WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 338         WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 339         WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 340         WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 341         WMI_10_4_SERVICE_VDEV_RX_FILTER,
 342         WMI_10_4_SERVICE_BTCOEX,
 343         WMI_10_4_SERVICE_CHECK_CAL_VERSION,
 344         WMI_10_4_SERVICE_DBGLOG_WARN2,
 345         WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
 346         WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
 347         WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
 348         WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
 349         WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
 350         WMI_10_4_SERVICE_TDLS,
 351         WMI_10_4_SERVICE_TDLS_OFFCHAN,
 352         WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
 353         WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
 354         WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 355         WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 356         WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
 357         WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 358         WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
 359         WMI_10_4_SERVICE_TPC_STATS_FINAL,
 360         WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
 361         WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
 362         WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
 363         WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
 364         WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 365         WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
 366         WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 367         WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
 368         WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
 369         WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 370         WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
 371         WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
 372         WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
 373         WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 374         WMI_10_4_SERVICE_REPORT_AIRTIME,
 375         WMI_10_4_SERVICE_TX_PWR_PER_PEER,
 376         WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
 377         WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
 378         WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
 379         WMI_10_4_SERVICE_QINQ_SUPPORT,
 380         WMI_10_4_SERVICE_RESET_CHIP,
 381 };
 382
 383 static inline char *wmi_service_name(enum wmi_service service_id)
 384 {
 385 #define SVCSTR(x) case x: return #x
 386
 387         switch (service_id) {
 388         SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
 389         SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
 390         SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
 391         SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
 392         SVCSTR(WMI_SERVICE_STA_PWRSAVE);
 393         SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
 394         SVCSTR(WMI_SERVICE_AP_UAPSD);
 395         SVCSTR(WMI_SERVICE_AP_DFS);
 396         SVCSTR(WMI_SERVICE_11AC);
 397         SVCSTR(WMI_SERVICE_BLOCKACK);
 398         SVCSTR(WMI_SERVICE_PHYERR);
 399         SVCSTR(WMI_SERVICE_BCN_FILTER);
 400         SVCSTR(WMI_SERVICE_RTT);
 401         SVCSTR(WMI_SERVICE_RATECTRL);
 402         SVCSTR(WMI_SERVICE_WOW);
 403         SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
 404         SVCSTR(WMI_SERVICE_IRAM_TIDS);
 405         SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
 406         SVCSTR(WMI_SERVICE_NLO);
 407         SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
 408         SVCSTR(WMI_SERVICE_SCAN_SCH);
 409         SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
 410         SVCSTR(WMI_SERVICE_CHATTER);
 411         SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
 412         SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
 413         SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
 414         SVCSTR(WMI_SERVICE_GPIO);
 415         SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
 416         SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
 417         SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
 418         SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
 419         SVCSTR(WMI_SERVICE_TX_ENCAP);
 420         SVCSTR(WMI_SERVICE_BURST);
 421         SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
 422         SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
 423         SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
 424         SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
 425         SVCSTR(WMI_SERVICE_EARLY_RX);
 426         SVCSTR(WMI_SERVICE_STA_SMPS);
 427         SVCSTR(WMI_SERVICE_FWTEST);
 428         SVCSTR(WMI_SERVICE_STA_WMMAC);
 429         SVCSTR(WMI_SERVICE_TDLS);
 430         SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
 431         SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
 432         SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
 433         SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
 434         SVCSTR(WMI_SERVICE_WLAN_HB);
 435         SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
 436         SVCSTR(WMI_SERVICE_BATCH_SCAN);
 437         SVCSTR(WMI_SERVICE_QPOWER);
 438         SVCSTR(WMI_SERVICE_PLMREQ);
 439         SVCSTR(WMI_SERVICE_THERMAL_MGMT);
 440         SVCSTR(WMI_SERVICE_RMC);
 441         SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
 442         SVCSTR(WMI_SERVICE_COEX_SAR);
 443         SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
 444         SVCSTR(WMI_SERVICE_NAN);
 445         SVCSTR(WMI_SERVICE_L1SS_STAT);
 446         SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
 447         SVCSTR(WMI_SERVICE_OBSS_SCAN);
 448         SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
 449         SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
 450         SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
 451         SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
 452         SVCSTR(WMI_SERVICE_LPASS);
 453         SVCSTR(WMI_SERVICE_EXTSCAN);
 454         SVCSTR(WMI_SERVICE_D0WOW);
 455         SVCSTR(WMI_SERVICE_HSOFFLOAD);
 456         SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
 457         SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
 458         SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
 459         SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
 460         SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
 461         SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
 462         SVCSTR(WMI_SERVICE_ATF);
 463         SVCSTR(WMI_SERVICE_COEX_GPIO);
 464         SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
 465         SVCSTR(WMI_SERVICE_TT);
 466         SVCSTR(WMI_SERVICE_PEER_CACHING);
 467         SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
 468         SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
 469         SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
 470         SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
 471         SVCSTR(WMI_SERVICE_MESH_11S);
 472         SVCSTR(WMI_SERVICE_MESH_NON_11S);
 473         SVCSTR(WMI_SERVICE_PEER_STATS);
 474         SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
 475         SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
 476         SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
 477         SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
 478         SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
 479         SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
 480         SVCSTR(WMI_SERVICE_BTCOEX);
 481         SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
 482         SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
 483         SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
 484         SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
 485         SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
 486         SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
 487         SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
 488         SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
 489         SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
 490         SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
 491         SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
 492         SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
 493         SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
 494         SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
 495         SVCSTR(WMI_SERVICE_RESET_CHIP);
 496         SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
 497         SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
 498         SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
 499         SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
 500         SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
 501         SVCSTR(WMI_SERVICE_THERM_THROT);
 502         SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
 503         SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
 504         SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
 505         SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
 506         SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
 507         SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
 508         SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
 509         SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
 510
 511         case WMI_SERVICE_MAX:
 512                 return NULL;
 513         }
 514
 515 #undef SVCSTR
 516
 517         return NULL;
 518 }
 519
 520 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
 521         ((svc_id) < (len) && \
 522          __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
 523          BIT((svc_id) % (sizeof(u32))))
 524
 525 /* This extension is required to accommodate new services, current limit
 526  * for wmi_services is 64 as target is using only 4-bits of each 32-bit
 527  * wmi_service word. Extending this to make use of remaining unused bits
 528  * for new services.
 529  */
 530 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
 531         ((svc_id) >= (len) && \
 532         __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
 533         BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
 534
 535 #define SVCMAP(x, y, len) \
 536         do { \
 537                 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
 538                     (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
 539                         __set_bit(y, out); \
 540         } while (0)
 541
 542 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
 543                                    size_t len)
 544 {
 545         SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
 546                WMI_SERVICE_BEACON_OFFLOAD, len);
 547         SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
 548                WMI_SERVICE_SCAN_OFFLOAD, len);
 549         SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
 550                WMI_SERVICE_ROAM_OFFLOAD, len);
 551         SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 552                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 553         SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
 554                WMI_SERVICE_STA_PWRSAVE, len);
 555         SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 556                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 557         SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
 558                WMI_SERVICE_AP_UAPSD, len);
 559         SVCMAP(WMI_10X_SERVICE_AP_DFS,
 560                WMI_SERVICE_AP_DFS, len);
 561         SVCMAP(WMI_10X_SERVICE_11AC,
 562                WMI_SERVICE_11AC, len);
 563         SVCMAP(WMI_10X_SERVICE_BLOCKACK,
 564                WMI_SERVICE_BLOCKACK, len);
 565         SVCMAP(WMI_10X_SERVICE_PHYERR,
 566                WMI_SERVICE_PHYERR, len);
 567         SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
 568                WMI_SERVICE_BCN_FILTER, len);
 569         SVCMAP(WMI_10X_SERVICE_RTT,
 570                WMI_SERVICE_RTT, len);
 571         SVCMAP(WMI_10X_SERVICE_RATECTRL,
 572                WMI_SERVICE_RATECTRL, len);
 573         SVCMAP(WMI_10X_SERVICE_WOW,
 574                WMI_SERVICE_WOW, len);
 575         SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
 576                WMI_SERVICE_RATECTRL_CACHE, len);
 577         SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
 578                WMI_SERVICE_IRAM_TIDS, len);
 579         SVCMAP(WMI_10X_SERVICE_BURST,
 580                WMI_SERVICE_BURST, len);
 581         SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 582                WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 583         SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
 584                WMI_SERVICE_FORCE_FW_HANG, len);
 585         SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 586                WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 587         SVCMAP(WMI_10X_SERVICE_ATF,
 588                WMI_SERVICE_ATF, len);
 589         SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
 590                WMI_SERVICE_COEX_GPIO, len);
 591         SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
 592                WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 593         SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
 594                WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 595         SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 596                WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 597         SVCMAP(WMI_10X_SERVICE_MESH,
 598                WMI_SERVICE_MESH_11S, len);
 599         SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 600                WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 601         SVCMAP(WMI_10X_SERVICE_PEER_STATS,
 602                WMI_SERVICE_PEER_STATS, len);
 603         SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
 604                WMI_SERVICE_RESET_CHIP, len);
 605         SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 606                WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
 607         SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 608                WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
 609         SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
 610                WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
 611 }
 612
 613 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
 614                                     size_t len)
 615 {
 616         SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
 617                WMI_SERVICE_BEACON_OFFLOAD, len);
 618         SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 619                WMI_SERVICE_SCAN_OFFLOAD, len);
 620         SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 621                WMI_SERVICE_ROAM_OFFLOAD, len);
 622         SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 623                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 624         SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
 625                WMI_SERVICE_STA_PWRSAVE, len);
 626         SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 627                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 628         SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
 629                WMI_SERVICE_AP_UAPSD, len);
 630         SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
 631                WMI_SERVICE_AP_DFS, len);
 632         SVCMAP(WMI_MAIN_SERVICE_11AC,
 633                WMI_SERVICE_11AC, len);
 634         SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
 635                WMI_SERVICE_BLOCKACK, len);
 636         SVCMAP(WMI_MAIN_SERVICE_PHYERR,
 637                WMI_SERVICE_PHYERR, len);
 638         SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
 639                WMI_SERVICE_BCN_FILTER, len);
 640         SVCMAP(WMI_MAIN_SERVICE_RTT,
 641                WMI_SERVICE_RTT, len);
 642         SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
 643                WMI_SERVICE_RATECTRL, len);
 644         SVCMAP(WMI_MAIN_SERVICE_WOW,
 645                WMI_SERVICE_WOW, len);
 646         SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
 647                WMI_SERVICE_RATECTRL_CACHE, len);
 648         SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
 649                WMI_SERVICE_IRAM_TIDS, len);
 650         SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 651                WMI_SERVICE_ARPNS_OFFLOAD, len);
 652         SVCMAP(WMI_MAIN_SERVICE_NLO,
 653                WMI_SERVICE_NLO, len);
 654         SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
 655                WMI_SERVICE_GTK_OFFLOAD, len);
 656         SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
 657                WMI_SERVICE_SCAN_SCH, len);
 658         SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
 659                WMI_SERVICE_CSA_OFFLOAD, len);
 660         SVCMAP(WMI_MAIN_SERVICE_CHATTER,
 661                WMI_SERVICE_CHATTER, len);
 662         SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
 663                WMI_SERVICE_COEX_FREQAVOID, len);
 664         SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 665                WMI_SERVICE_PACKET_POWER_SAVE, len);
 666         SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
 667                WMI_SERVICE_FORCE_FW_HANG, len);
 668         SVCMAP(WMI_MAIN_SERVICE_GPIO,
 669                WMI_SERVICE_GPIO, len);
 670         SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 671                WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
 672         SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 673                WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 674         SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 675                WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 676         SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 677                WMI_SERVICE_STA_KEEP_ALIVE, len);
 678         SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
 679                WMI_SERVICE_TX_ENCAP, len);
 680 }
 681
 682 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 683                                     size_t len)
 684 {
 685         SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
 686                WMI_SERVICE_BEACON_OFFLOAD, len);
 687         SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
 688                WMI_SERVICE_SCAN_OFFLOAD, len);
 689         SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
 690                WMI_SERVICE_ROAM_OFFLOAD, len);
 691         SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 692                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 693         SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
 694                WMI_SERVICE_STA_PWRSAVE, len);
 695         SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 696                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 697         SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
 698                WMI_SERVICE_AP_UAPSD, len);
 699         SVCMAP(WMI_10_4_SERVICE_AP_DFS,
 700                WMI_SERVICE_AP_DFS, len);
 701         SVCMAP(WMI_10_4_SERVICE_11AC,
 702                WMI_SERVICE_11AC, len);
 703         SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
 704                WMI_SERVICE_BLOCKACK, len);
 705         SVCMAP(WMI_10_4_SERVICE_PHYERR,
 706                WMI_SERVICE_PHYERR, len);
 707         SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
 708                WMI_SERVICE_BCN_FILTER, len);
 709         SVCMAP(WMI_10_4_SERVICE_RTT,
 710                WMI_SERVICE_RTT, len);
 711         SVCMAP(WMI_10_4_SERVICE_RATECTRL,
 712                WMI_SERVICE_RATECTRL, len);
 713         SVCMAP(WMI_10_4_SERVICE_WOW,
 714                WMI_SERVICE_WOW, len);
 715         SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
 716                WMI_SERVICE_RATECTRL_CACHE, len);
 717         SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
 718                WMI_SERVICE_IRAM_TIDS, len);
 719         SVCMAP(WMI_10_4_SERVICE_BURST,
 720                WMI_SERVICE_BURST, len);
 721         SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 722                WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 723         SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
 724                WMI_SERVICE_GTK_OFFLOAD, len);
 725         SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
 726                WMI_SERVICE_SCAN_SCH, len);
 727         SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
 728                WMI_SERVICE_CSA_OFFLOAD, len);
 729         SVCMAP(WMI_10_4_SERVICE_CHATTER,
 730                WMI_SERVICE_CHATTER, len);
 731         SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
 732                WMI_SERVICE_COEX_FREQAVOID, len);
 733         SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 734                WMI_SERVICE_PACKET_POWER_SAVE, len);
 735         SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
 736                WMI_SERVICE_FORCE_FW_HANG, len);
 737         SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 738                WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 739         SVCMAP(WMI_10_4_SERVICE_GPIO,
 740                WMI_SERVICE_GPIO, len);
 741         SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 742                WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 743         SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 744                WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 745         SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 746                WMI_SERVICE_STA_KEEP_ALIVE, len);
 747         SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
 748                WMI_SERVICE_TX_ENCAP, len);
 749         SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 750                WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
 751         SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
 752                WMI_SERVICE_EARLY_RX, len);
 753         SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 754                WMI_SERVICE_ENHANCED_PROXY_STA, len);
 755         SVCMAP(WMI_10_4_SERVICE_TT,
 756                WMI_SERVICE_TT, len);
 757         SVCMAP(WMI_10_4_SERVICE_ATF,
 758                WMI_SERVICE_ATF, len);
 759         SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
 760                WMI_SERVICE_PEER_CACHING, len);
 761         SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
 762                WMI_SERVICE_COEX_GPIO, len);
 763         SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 764                WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 765         SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 766                WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 767         SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 768                WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 769         SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 770                WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 771         SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
 772                WMI_SERVICE_MESH_NON_11S, len);
 773         SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
 774                WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
 775         SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
 776                WMI_SERVICE_PEER_STATS, len);
 777         SVCMAP(WMI_10_4_SERVICE_MESH_11S,
 778                WMI_SERVICE_MESH_11S, len);
 779         SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 780                WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
 781         SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 782                WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
 783         SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 784                WMI_SERVICE_TX_MODE_PUSH_PULL, len);
 785         SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 786                WMI_SERVICE_TX_MODE_DYNAMIC, len);
 787         SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
 788                WMI_SERVICE_VDEV_RX_FILTER, len);
 789         SVCMAP(WMI_10_4_SERVICE_BTCOEX,
 790                WMI_SERVICE_BTCOEX, len);
 791         SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
 792                WMI_SERVICE_CHECK_CAL_VERSION, len);
 793         SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
 794                WMI_SERVICE_DBGLOG_WARN2, len);
 795         SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
 796                WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
 797         SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
 798                WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
 799         SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
 800                WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
 801         SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
 802                WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
 803         SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
 804                WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
 805         SVCMAP(WMI_10_4_SERVICE_TDLS,
 806                WMI_SERVICE_TDLS, len);
 807         SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
 808                WMI_SERVICE_TDLS_OFFCHAN, len);
 809         SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
 810                WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
 811         SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
 812                WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
 813         SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 814                WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
 815         SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 816                WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
 817         SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
 818                WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
 819         SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 820                WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
 821         SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
 822                WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
 823         SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
 824                WMI_SERVICE_TPC_STATS_FINAL, len);
 825         SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
 826                WMI_SERVICE_TX_DATA_ACK_RSSI, len);
 827         SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 828                WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
 829         SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 830                WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
 831         SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
 832                WMI_SERVICE_RTT_RESPONDER_ROLE, len);
 833         SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
 834                WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
 835         SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
 836                WMI_SERVICE_REPORT_AIRTIME, len);
 837         SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
 838                WMI_SERVICE_TX_PWR_PER_PEER, len);
 839         SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
 840                WMI_SERVICE_RESET_CHIP, len);
 841         SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 842                WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 843         SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 844                WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 845 }
 846
 847 #undef SVCMAP
 848
 849 /* 2 word representation of MAC addr */
 850 struct wmi_mac_addr {
 851         union {
 852                 u8 addr[6];
 853                 struct {
 854                         u32 word0;
 855                         u32 word1;
 856                 } __packed;
 857         } __packed;
 858 } __packed;
 859
 860 struct wmi_cmd_map {
 861         u32 init_cmdid;
 862         u32 start_scan_cmdid;
 863         u32 stop_scan_cmdid;
 864         u32 scan_chan_list_cmdid;
 865         u32 scan_sch_prio_tbl_cmdid;
 866         u32 scan_prob_req_oui_cmdid;
 867         u32 pdev_set_regdomain_cmdid;
 868         u32 pdev_set_channel_cmdid;
 869         u32 pdev_set_param_cmdid;
 870         u32 pdev_pktlog_enable_cmdid;
 871         u32 pdev_pktlog_disable_cmdid;
 872         u32 pdev_set_wmm_params_cmdid;
 873         u32 pdev_set_ht_cap_ie_cmdid;
 874         u32 pdev_set_vht_cap_ie_cmdid;
 875         u32 pdev_set_dscp_tid_map_cmdid;
 876         u32 pdev_set_quiet_mode_cmdid;
 877         u32 pdev_green_ap_ps_enable_cmdid;
 878         u32 pdev_get_tpc_config_cmdid;
 879         u32 pdev_set_base_macaddr_cmdid;
 880         u32 vdev_create_cmdid;
 881         u32 vdev_delete_cmdid;
 882         u32 vdev_start_request_cmdid;
 883         u32 vdev_restart_request_cmdid;
 884         u32 vdev_up_cmdid;
 885         u32 vdev_stop_cmdid;
 886         u32 vdev_down_cmdid;
 887         u32 vdev_set_param_cmdid;
 888         u32 vdev_install_key_cmdid;
 889         u32 peer_create_cmdid;
 890         u32 peer_delete_cmdid;
 891         u32 peer_flush_tids_cmdid;
 892         u32 peer_set_param_cmdid;
 893         u32 peer_assoc_cmdid;
 894         u32 peer_add_wds_entry_cmdid;
 895         u32 peer_remove_wds_entry_cmdid;
 896         u32 peer_mcast_group_cmdid;
 897         u32 bcn_tx_cmdid;
 898         u32 pdev_send_bcn_cmdid;
 899         u32 bcn_tmpl_cmdid;
 900         u32 bcn_filter_rx_cmdid;
 901         u32 prb_req_filter_rx_cmdid;
 902         u32 mgmt_tx_cmdid;
 903         u32 mgmt_tx_send_cmdid;
 904         u32 prb_tmpl_cmdid;
 905         u32 addba_clear_resp_cmdid;
 906         u32 addba_send_cmdid;
 907         u32 addba_status_cmdid;
 908         u32 delba_send_cmdid;
 909         u32 addba_set_resp_cmdid;
 910         u32 send_singleamsdu_cmdid;
 911         u32 sta_powersave_mode_cmdid;
 912         u32 sta_powersave_param_cmdid;
 913         u32 sta_mimo_ps_mode_cmdid;
 914         u32 pdev_dfs_enable_cmdid;
 915         u32 pdev_dfs_disable_cmdid;
 916         u32 roam_scan_mode;
 917         u32 roam_scan_rssi_threshold;
 918         u32 roam_scan_period;
 919         u32 roam_scan_rssi_change_threshold;
 920         u32 roam_ap_profile;
 921         u32 ofl_scan_add_ap_profile;
 922         u32 ofl_scan_remove_ap_profile;
 923         u32 ofl_scan_period;
 924         u32 p2p_dev_set_device_info;
 925         u32 p2p_dev_set_discoverability;
 926         u32 p2p_go_set_beacon_ie;
 927         u32 p2p_go_set_probe_resp_ie;
 928         u32 p2p_set_vendor_ie_data_cmdid;
 929         u32 ap_ps_peer_param_cmdid;
 930         u32 ap_ps_peer_uapsd_coex_cmdid;
 931         u32 peer_rate_retry_sched_cmdid;
 932         u32 wlan_profile_trigger_cmdid;
 933         u32 wlan_profile_set_hist_intvl_cmdid;
 934         u32 wlan_profile_get_profile_data_cmdid;
 935         u32 wlan_profile_enable_profile_id_cmdid;
 936         u32 wlan_profile_list_profile_id_cmdid;
 937         u32 pdev_suspend_cmdid;
 938         u32 pdev_resume_cmdid;
 939         u32 add_bcn_filter_cmdid;
 940         u32 rmv_bcn_filter_cmdid;
 941         u32 wow_add_wake_pattern_cmdid;
 942         u32 wow_del_wake_pattern_cmdid;
 943         u32 wow_enable_disable_wake_event_cmdid;
 944         u32 wow_enable_cmdid;
 945         u32 wow_hostwakeup_from_sleep_cmdid;
 946         u32 rtt_measreq_cmdid;
 947         u32 rtt_tsf_cmdid;
 948         u32 vdev_spectral_scan_configure_cmdid;
 949         u32 vdev_spectral_scan_enable_cmdid;
 950         u32 request_stats_cmdid;
 951         u32 request_peer_stats_info_cmdid;
 952         u32 set_arp_ns_offload_cmdid;
 953         u32 network_list_offload_config_cmdid;
 954         u32 gtk_offload_cmdid;
 955         u32 csa_offload_enable_cmdid;
 956         u32 csa_offload_chanswitch_cmdid;
 957         u32 chatter_set_mode_cmdid;
 958         u32 peer_tid_addba_cmdid;
 959         u32 peer_tid_delba_cmdid;
 960         u32 sta_dtim_ps_method_cmdid;
 961         u32 sta_uapsd_auto_trig_cmdid;
 962         u32 sta_keepalive_cmd;
 963         u32 echo_cmdid;
 964         u32 pdev_utf_cmdid;
 965         u32 dbglog_cfg_cmdid;
 966         u32 pdev_qvit_cmdid;
 967         u32 pdev_ftm_intg_cmdid;
 968         u32 vdev_set_keepalive_cmdid;
 969         u32 vdev_get_keepalive_cmdid;
 970         u32 force_fw_hang_cmdid;
 971         u32 gpio_config_cmdid;
 972         u32 gpio_output_cmdid;
 973         u32 pdev_get_temperature_cmdid;
 974         u32 vdev_set_wmm_params_cmdid;
 975         u32 tdls_set_state_cmdid;
 976         u32 tdls_peer_update_cmdid;
 977         u32 adaptive_qcs_cmdid;
 978         u32 scan_update_request_cmdid;
 979         u32 vdev_standby_response_cmdid;
 980         u32 vdev_resume_response_cmdid;
 981         u32 wlan_peer_caching_add_peer_cmdid;
 982         u32 wlan_peer_caching_evict_peer_cmdid;
 983         u32 wlan_peer_caching_restore_peer_cmdid;
 984         u32 wlan_peer_caching_print_all_peers_info_cmdid;
 985         u32 peer_update_wds_entry_cmdid;
 986         u32 peer_add_proxy_sta_entry_cmdid;
 987         u32 rtt_keepalive_cmdid;
 988         u32 oem_req_cmdid;
 989         u32 nan_cmdid;
 990         u32 vdev_ratemask_cmdid;
 991         u32 qboost_cfg_cmdid;
 992         u32 pdev_smart_ant_enable_cmdid;
 993         u32 pdev_smart_ant_set_rx_antenna_cmdid;
 994         u32 peer_smart_ant_set_tx_antenna_cmdid;
 995         u32 peer_smart_ant_set_train_info_cmdid;
 996         u32 peer_smart_ant_set_node_config_ops_cmdid;
 997         u32 pdev_set_antenna_switch_table_cmdid;
 998         u32 pdev_set_ctl_table_cmdid;
 999         u32 pdev_set_mimogain_table_cmdid;
1000         u32 pdev_ratepwr_table_cmdid;
1001         u32 pdev_ratepwr_chainmsk_table_cmdid;
1002         u32 pdev_fips_cmdid;
1003         u32 tt_set_conf_cmdid;
1004         u32 fwtest_cmdid;
1005         u32 vdev_atf_request_cmdid;
1006         u32 peer_atf_request_cmdid;
1007         u32 pdev_get_ani_cck_config_cmdid;
1008         u32 pdev_get_ani_ofdm_config_cmdid;
1009         u32 pdev_reserve_ast_entry_cmdid;
1010         u32 pdev_get_nfcal_power_cmdid;
1011         u32 pdev_get_tpc_cmdid;
1012         u32 pdev_get_ast_info_cmdid;
1013         u32 vdev_set_dscp_tid_map_cmdid;
1014         u32 pdev_get_info_cmdid;
1015         u32 vdev_get_info_cmdid;
1016         u32 vdev_filter_neighbor_rx_packets_cmdid;
1017         u32 mu_cal_start_cmdid;
1018         u32 set_cca_params_cmdid;
1019         u32 pdev_bss_chan_info_request_cmdid;
1020         u32 pdev_enable_adaptive_cca_cmdid;
1021         u32 ext_resource_cfg_cmdid;
1022         u32 vdev_set_ie_cmdid;
1023         u32 set_lteu_config_cmdid;
1024         u32 atf_ssid_grouping_request_cmdid;
1025         u32 peer_atf_ext_request_cmdid;
1026         u32 set_periodic_channel_stats_cfg_cmdid;
1027         u32 peer_bwf_request_cmdid;
1028         u32 btcoex_cfg_cmdid;
1029         u32 peer_tx_mu_txmit_count_cmdid;
1030         u32 peer_tx_mu_txmit_rstcnt_cmdid;
1031         u32 peer_gid_userpos_list_cmdid;
1032         u32 pdev_check_cal_version_cmdid;
1033         u32 coex_version_cfg_cmid;
1034         u32 pdev_get_rx_filter_cmdid;
1035         u32 pdev_extended_nss_cfg_cmdid;
1036         u32 vdev_set_scan_nac_rssi_cmdid;
1037         u32 prog_gpio_band_select_cmdid;
1038         u32 config_smart_logging_cmdid;
1039         u32 debug_fatal_condition_cmdid;
1040         u32 get_tsf_timer_cmdid;
1041         u32 pdev_get_tpc_table_cmdid;
1042         u32 vdev_sifs_trigger_time_cmdid;
1043         u32 pdev_wds_entry_list_cmdid;
1044         u32 tdls_set_offchan_mode_cmdid;
1045         u32 radar_found_cmdid;
1046         u32 set_bb_timing_cmdid;
1047         u32 per_peer_per_tid_config_cmdid;
1048 };
1049
1050 /*
1051  * wmi command groups.
1052  */
1053 enum wmi_cmd_group {
1054         /* 0 to 2 are reserved */
1055         WMI_GRP_START = 0x3,
1056         WMI_GRP_SCAN = WMI_GRP_START,
1057         WMI_GRP_PDEV,
1058         WMI_GRP_VDEV,
1059         WMI_GRP_PEER,
1060         WMI_GRP_MGMT,
1061         WMI_GRP_BA_NEG,
1062         WMI_GRP_STA_PS,
1063         WMI_GRP_DFS,
1064         WMI_GRP_ROAM,
1065         WMI_GRP_OFL_SCAN,
1066         WMI_GRP_P2P,
1067         WMI_GRP_AP_PS,
1068         WMI_GRP_RATE_CTRL,
1069         WMI_GRP_PROFILE,
1070         WMI_GRP_SUSPEND,
1071         WMI_GRP_BCN_FILTER,
1072         WMI_GRP_WOW,
1073         WMI_GRP_RTT,
1074         WMI_GRP_SPECTRAL,
1075         WMI_GRP_STATS,
1076         WMI_GRP_ARP_NS_OFL,
1077         WMI_GRP_NLO_OFL,
1078         WMI_GRP_GTK_OFL,
1079         WMI_GRP_CSA_OFL,
1080         WMI_GRP_CHATTER,
1081         WMI_GRP_TID_ADDBA,
1082         WMI_GRP_MISC,
1083         WMI_GRP_GPIO,
1084 };
1085
1086 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1087 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1088
1089 #define WMI_CMD_UNSUPPORTED 0
1090
1091 /* Command IDs and command events for MAIN FW. */
1092 enum wmi_cmd_id {
1093         WMI_INIT_CMDID = 0x1,
1094
1095         /* Scan specific commands */
1096         WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1097         WMI_STOP_SCAN_CMDID,
1098         WMI_SCAN_CHAN_LIST_CMDID,
1099         WMI_SCAN_SCH_PRIO_TBL_CMDID,
1100
1101         /* PDEV (physical device) specific commands */
1102         WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1103         WMI_PDEV_SET_CHANNEL_CMDID,
1104         WMI_PDEV_SET_PARAM_CMDID,
1105         WMI_PDEV_PKTLOG_ENABLE_CMDID,
1106         WMI_PDEV_PKTLOG_DISABLE_CMDID,
1107         WMI_PDEV_SET_WMM_PARAMS_CMDID,
1108         WMI_PDEV_SET_HT_CAP_IE_CMDID,
1109         WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1110         WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1111         WMI_PDEV_SET_QUIET_MODE_CMDID,
1112         WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1113         WMI_PDEV_GET_TPC_CONFIG_CMDID,
1114         WMI_PDEV_SET_BASE_MACADDR_CMDID,
1115
1116         /* VDEV (virtual device) specific commands */
1117         WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1118         WMI_VDEV_DELETE_CMDID,
1119         WMI_VDEV_START_REQUEST_CMDID,
1120         WMI_VDEV_RESTART_REQUEST_CMDID,
1121         WMI_VDEV_UP_CMDID,
1122         WMI_VDEV_STOP_CMDID,
1123         WMI_VDEV_DOWN_CMDID,
1124         WMI_VDEV_SET_PARAM_CMDID,
1125         WMI_VDEV_INSTALL_KEY_CMDID,
1126
1127         /* peer specific commands */
1128         WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1129         WMI_PEER_DELETE_CMDID,
1130         WMI_PEER_FLUSH_TIDS_CMDID,
1131         WMI_PEER_SET_PARAM_CMDID,
1132         WMI_PEER_ASSOC_CMDID,
1133         WMI_PEER_ADD_WDS_ENTRY_CMDID,
1134         WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1135         WMI_PEER_MCAST_GROUP_CMDID,
1136
1137         /* beacon/management specific commands */
1138         WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1139         WMI_PDEV_SEND_BCN_CMDID,
1140         WMI_BCN_TMPL_CMDID,
1141         WMI_BCN_FILTER_RX_CMDID,
1142         WMI_PRB_REQ_FILTER_RX_CMDID,
1143         WMI_MGMT_TX_CMDID,
1144         WMI_PRB_TMPL_CMDID,
1145
1146         /* commands to directly control BA negotiation directly from host. */
1147         WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1148         WMI_ADDBA_SEND_CMDID,
1149         WMI_ADDBA_STATUS_CMDID,
1150         WMI_DELBA_SEND_CMDID,
1151         WMI_ADDBA_SET_RESP_CMDID,
1152         WMI_SEND_SINGLEAMSDU_CMDID,
1153
1154         /* Station power save specific config */
1155         WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1156         WMI_STA_POWERSAVE_PARAM_CMDID,
1157         WMI_STA_MIMO_PS_MODE_CMDID,
1158
1159         /** DFS-specific commands */
1160         WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1161         WMI_PDEV_DFS_DISABLE_CMDID,
1162
1163         /* Roaming specific  commands */
1164         WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1165         WMI_ROAM_SCAN_RSSI_THRESHOLD,
1166         WMI_ROAM_SCAN_PERIOD,
1167         WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1168         WMI_ROAM_AP_PROFILE,
1169
1170         /* offload scan specific commands */
1171         WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1172         WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1173         WMI_OFL_SCAN_PERIOD,
1174
1175         /* P2P specific commands */
1176         WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1177         WMI_P2P_DEV_SET_DISCOVERABILITY,
1178         WMI_P2P_GO_SET_BEACON_IE,
1179         WMI_P2P_GO_SET_PROBE_RESP_IE,
1180         WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1181
1182         /* AP power save specific config */
1183         WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1184         WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1185
1186         /* Rate-control specific commands */
1187         WMI_PEER_RATE_RETRY_SCHED_CMDID =
1188         WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1189
1190         /* WLAN Profiling commands. */
1191         WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1192         WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1193         WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1194         WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1195         WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1196
1197         /* Suspend resume command Ids */
1198         WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1199         WMI_PDEV_RESUME_CMDID,
1200
1201         /* Beacon filter commands */
1202         WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1203         WMI_RMV_BCN_FILTER_CMDID,
1204
1205         /* WOW Specific WMI commands*/
1206         WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1207         WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1208         WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1209         WMI_WOW_ENABLE_CMDID,
1210         WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1211
1212         /* RTT measurement related cmd */
1213         WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1214         WMI_RTT_TSF_CMDID,
1215
1216         /* spectral scan commands */
1217         WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1218         WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1219
1220         /* F/W stats */
1221         WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1222
1223         /* ARP OFFLOAD REQUEST*/
1224         WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1225
1226         /* NS offload confid*/
1227         WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1228
1229         /* GTK offload Specific WMI commands*/
1230         WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1231
1232         /* CSA offload Specific WMI commands*/
1233         WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1234         WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1235
1236         /* Chatter commands*/
1237         WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1238
1239         /* addba specific commands */
1240         WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1241         WMI_PEER_TID_DELBA_CMDID,
1242
1243         /* set station mimo powersave method */
1244         WMI_STA_DTIM_PS_METHOD_CMDID,
1245         /* Configure the Station UAPSD AC Auto Trigger Parameters */
1246         WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1247
1248         /* STA Keep alive parameter configuration,
1249          * Requires WMI_SERVICE_STA_KEEP_ALIVE
1250          */
1251         WMI_STA_KEEPALIVE_CMD,
1252
1253         /* misc command group */
1254         WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1255         WMI_PDEV_UTF_CMDID,
1256         WMI_DBGLOG_CFG_CMDID,
1257         WMI_PDEV_QVIT_CMDID,
1258         WMI_PDEV_FTM_INTG_CMDID,
1259         WMI_VDEV_SET_KEEPALIVE_CMDID,
1260         WMI_VDEV_GET_KEEPALIVE_CMDID,
1261         WMI_FORCE_FW_HANG_CMDID,
1262
1263         /* GPIO Configuration */
1264         WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1265         WMI_GPIO_OUTPUT_CMDID,
1266 };
1267
1268 enum wmi_event_id {
1269         WMI_SERVICE_READY_EVENTID = 0x1,
1270         WMI_READY_EVENTID,
1271         WMI_SERVICE_AVAILABLE_EVENTID,
1272
1273         /* Scan specific events */
1274         WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1275
1276         /* PDEV specific events */
1277         WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1278         WMI_CHAN_INFO_EVENTID,
1279         WMI_PHYERR_EVENTID,
1280
1281         /* VDEV specific events */
1282         WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1283         WMI_VDEV_STOPPED_EVENTID,
1284         WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1285
1286         /* peer specific events */
1287         WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1288
1289         /* beacon/mgmt specific events */
1290         WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1291         WMI_HOST_SWBA_EVENTID,
1292         WMI_TBTTOFFSET_UPDATE_EVENTID,
1293
1294         /* ADDBA Related WMI Events*/
1295         WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1296         WMI_TX_ADDBA_COMPLETE_EVENTID,
1297
1298         /* Roam event to trigger roaming on host */
1299         WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1300         WMI_PROFILE_MATCH,
1301
1302         /* WoW */
1303         WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1304
1305         /* RTT */
1306         WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1307         WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1308         WMI_RTT_ERROR_REPORT_EVENTID,
1309
1310         /* GTK offload */
1311         WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1312         WMI_GTK_REKEY_FAIL_EVENTID,
1313
1314         /* CSA IE received event */
1315         WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1316
1317         /* Misc events */
1318         WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1319         WMI_PDEV_UTF_EVENTID,
1320         WMI_DEBUG_MESG_EVENTID,
1321         WMI_UPDATE_STATS_EVENTID,
1322         WMI_DEBUG_PRINT_EVENTID,
1323         WMI_DCS_INTERFERENCE_EVENTID,
1324         WMI_PDEV_QVIT_EVENTID,
1325         WMI_WLAN_PROFILE_DATA_EVENTID,
1326         WMI_PDEV_FTM_INTG_EVENTID,
1327         WMI_WLAN_FREQ_AVOID_EVENTID,
1328         WMI_VDEV_GET_KEEPALIVE_EVENTID,
1329
1330         /* GPIO Event */
1331         WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1332 };
1333
1334 /* Command IDs and command events for 10.X firmware */
1335 enum wmi_10x_cmd_id {
1336         WMI_10X_START_CMDID = 0x9000,
1337         WMI_10X_END_CMDID = 0x9FFF,
1338
1339         /* initialize the wlan sub system */
1340         WMI_10X_INIT_CMDID,
1341
1342         /* Scan specific commands */
1343
1344         WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1345         WMI_10X_STOP_SCAN_CMDID,
1346         WMI_10X_SCAN_CHAN_LIST_CMDID,
1347         WMI_10X_ECHO_CMDID,
1348
1349         /* PDEV(physical device) specific commands */
1350         WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1351         WMI_10X_PDEV_SET_CHANNEL_CMDID,
1352         WMI_10X_PDEV_SET_PARAM_CMDID,
1353         WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1354         WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1355         WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1356         WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1357         WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1358         WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1359         WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1360         WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1361         WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1362         WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1363
1364         /* VDEV(virtual device) specific commands */
1365         WMI_10X_VDEV_CREATE_CMDID,
1366         WMI_10X_VDEV_DELETE_CMDID,
1367         WMI_10X_VDEV_START_REQUEST_CMDID,
1368         WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1369         WMI_10X_VDEV_UP_CMDID,
1370         WMI_10X_VDEV_STOP_CMDID,
1371         WMI_10X_VDEV_DOWN_CMDID,
1372         WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1373         WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1374         WMI_10X_VDEV_SET_PARAM_CMDID,
1375         WMI_10X_VDEV_INSTALL_KEY_CMDID,
1376
1377         /* peer specific commands */
1378         WMI_10X_PEER_CREATE_CMDID,
1379         WMI_10X_PEER_DELETE_CMDID,
1380         WMI_10X_PEER_FLUSH_TIDS_CMDID,
1381         WMI_10X_PEER_SET_PARAM_CMDID,
1382         WMI_10X_PEER_ASSOC_CMDID,
1383         WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1384         WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1385         WMI_10X_PEER_MCAST_GROUP_CMDID,
1386
1387         /* beacon/management specific commands */
1388
1389         WMI_10X_BCN_TX_CMDID,
1390         WMI_10X_BCN_PRB_TMPL_CMDID,
1391         WMI_10X_BCN_FILTER_RX_CMDID,
1392         WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1393         WMI_10X_MGMT_TX_CMDID,
1394
1395         /* commands to directly control ba negotiation directly from host. */
1396         WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1397         WMI_10X_ADDBA_SEND_CMDID,
1398         WMI_10X_ADDBA_STATUS_CMDID,
1399         WMI_10X_DELBA_SEND_CMDID,
1400         WMI_10X_ADDBA_SET_RESP_CMDID,
1401         WMI_10X_SEND_SINGLEAMSDU_CMDID,
1402
1403         /* Station power save specific config */
1404         WMI_10X_STA_POWERSAVE_MODE_CMDID,
1405         WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1406         WMI_10X_STA_MIMO_PS_MODE_CMDID,
1407
1408         /* set debug log config */
1409         WMI_10X_DBGLOG_CFG_CMDID,
1410
1411         /* DFS-specific commands */
1412         WMI_10X_PDEV_DFS_ENABLE_CMDID,
1413         WMI_10X_PDEV_DFS_DISABLE_CMDID,
1414
1415         /* QVIT specific command id */
1416         WMI_10X_PDEV_QVIT_CMDID,
1417
1418         /* Offload Scan and Roaming related  commands */
1419         WMI_10X_ROAM_SCAN_MODE,
1420         WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1421         WMI_10X_ROAM_SCAN_PERIOD,
1422         WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1423         WMI_10X_ROAM_AP_PROFILE,
1424         WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1425         WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1426         WMI_10X_OFL_SCAN_PERIOD,
1427
1428         /* P2P specific commands */
1429         WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1430         WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1431         WMI_10X_P2P_GO_SET_BEACON_IE,
1432         WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1433
1434         /* AP power save specific config */
1435         WMI_10X_AP_PS_PEER_PARAM_CMDID,
1436         WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1437
1438         /* Rate-control specific commands */
1439         WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1440
1441         /* WLAN Profiling commands. */
1442         WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1443         WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1444         WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1445         WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1446         WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1447
1448         /* Suspend resume command Ids */
1449         WMI_10X_PDEV_SUSPEND_CMDID,
1450         WMI_10X_PDEV_RESUME_CMDID,
1451
1452         /* Beacon filter commands */
1453         WMI_10X_ADD_BCN_FILTER_CMDID,
1454         WMI_10X_RMV_BCN_FILTER_CMDID,
1455
1456         /* WOW Specific WMI commands*/
1457         WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1458         WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1459         WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1460         WMI_10X_WOW_ENABLE_CMDID,
1461         WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1462
1463         /* RTT measurement related cmd */
1464         WMI_10X_RTT_MEASREQ_CMDID,
1465         WMI_10X_RTT_TSF_CMDID,
1466
1467         /* transmit beacon by value */
1468         WMI_10X_PDEV_SEND_BCN_CMDID,
1469
1470         /* F/W stats */
1471         WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1472         WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1473         WMI_10X_REQUEST_STATS_CMDID,
1474
1475         /* GPIO Configuration */
1476         WMI_10X_GPIO_CONFIG_CMDID,
1477         WMI_10X_GPIO_OUTPUT_CMDID,
1478
1479         WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1480 };
1481
1482 enum wmi_10x_event_id {
1483         WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1484         WMI_10X_READY_EVENTID,
1485         WMI_10X_START_EVENTID = 0x9000,
1486         WMI_10X_END_EVENTID = 0x9FFF,
1487
1488         /* Scan specific events */
1489         WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1490         WMI_10X_ECHO_EVENTID,
1491         WMI_10X_DEBUG_MESG_EVENTID,
1492         WMI_10X_UPDATE_STATS_EVENTID,
1493
1494         /* Instantaneous RSSI event */
1495         WMI_10X_INST_RSSI_STATS_EVENTID,
1496
1497         /* VDEV specific events */
1498         WMI_10X_VDEV_START_RESP_EVENTID,
1499         WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1500         WMI_10X_VDEV_RESUME_REQ_EVENTID,
1501         WMI_10X_VDEV_STOPPED_EVENTID,
1502
1503         /* peer  specific events */
1504         WMI_10X_PEER_STA_KICKOUT_EVENTID,
1505
1506         /* beacon/mgmt specific events */
1507         WMI_10X_HOST_SWBA_EVENTID,
1508         WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1509         WMI_10X_MGMT_RX_EVENTID,
1510
1511         /* Channel stats event */
1512         WMI_10X_CHAN_INFO_EVENTID,
1513
1514         /* PHY Error specific WMI event */
1515         WMI_10X_PHYERR_EVENTID,
1516
1517         /* Roam event to trigger roaming on host */
1518         WMI_10X_ROAM_EVENTID,
1519
1520         /* matching AP found from list of profiles */
1521         WMI_10X_PROFILE_MATCH,
1522
1523         /* debug print message used for tracing FW code while debugging */
1524         WMI_10X_DEBUG_PRINT_EVENTID,
1525         /* VI spoecific event */
1526         WMI_10X_PDEV_QVIT_EVENTID,
1527         /* FW code profile data in response to profile request */
1528         WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1529
1530         /*RTT related event ID*/
1531         WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1532         WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1533         WMI_10X_RTT_ERROR_REPORT_EVENTID,
1534
1535         WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1536         WMI_10X_DCS_INTERFERENCE_EVENTID,
1537
1538         /* TPC config for the current operating channel */
1539         WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1540
1541         WMI_10X_GPIO_INPUT_EVENTID,
1542         WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1543 };
1544
1545 enum wmi_10_2_cmd_id {
1546         WMI_10_2_START_CMDID = 0x9000,
1547         WMI_10_2_END_CMDID = 0x9FFF,
1548         WMI_10_2_INIT_CMDID,
1549         WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1550         WMI_10_2_STOP_SCAN_CMDID,
1551         WMI_10_2_SCAN_CHAN_LIST_CMDID,
1552         WMI_10_2_ECHO_CMDID,
1553         WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1554         WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1555         WMI_10_2_PDEV_SET_PARAM_CMDID,
1556         WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1557         WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1558         WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1559         WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1560         WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1561         WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1562         WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1563         WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1564         WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1565         WMI_10_2_VDEV_CREATE_CMDID,
1566         WMI_10_2_VDEV_DELETE_CMDID,
1567         WMI_10_2_VDEV_START_REQUEST_CMDID,
1568         WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1569         WMI_10_2_VDEV_UP_CMDID,
1570         WMI_10_2_VDEV_STOP_CMDID,
1571         WMI_10_2_VDEV_DOWN_CMDID,
1572         WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1573         WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1574         WMI_10_2_VDEV_SET_PARAM_CMDID,
1575         WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1576         WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1577         WMI_10_2_PEER_CREATE_CMDID,
1578         WMI_10_2_PEER_DELETE_CMDID,
1579         WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1580         WMI_10_2_PEER_SET_PARAM_CMDID,
1581         WMI_10_2_PEER_ASSOC_CMDID,
1582         WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1583         WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1584         WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1585         WMI_10_2_PEER_MCAST_GROUP_CMDID,
1586         WMI_10_2_BCN_TX_CMDID,
1587         WMI_10_2_BCN_PRB_TMPL_CMDID,
1588         WMI_10_2_BCN_FILTER_RX_CMDID,
1589         WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1590         WMI_10_2_MGMT_TX_CMDID,
1591         WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1592         WMI_10_2_ADDBA_SEND_CMDID,
1593         WMI_10_2_ADDBA_STATUS_CMDID,
1594         WMI_10_2_DELBA_SEND_CMDID,
1595         WMI_10_2_ADDBA_SET_RESP_CMDID,
1596         WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1597         WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1598         WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1599         WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1600         WMI_10_2_DBGLOG_CFG_CMDID,
1601         WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1602         WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1603         WMI_10_2_PDEV_QVIT_CMDID,
1604         WMI_10_2_ROAM_SCAN_MODE,
1605         WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1606         WMI_10_2_ROAM_SCAN_PERIOD,
1607         WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1608         WMI_10_2_ROAM_AP_PROFILE,
1609         WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1610         WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1611         WMI_10_2_OFL_SCAN_PERIOD,
1612         WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1613         WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1614         WMI_10_2_P2P_GO_SET_BEACON_IE,
1615         WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1616         WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1617         WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1618         WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1619         WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1620         WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1621         WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1622         WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1623         WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1624         WMI_10_2_PDEV_SUSPEND_CMDID,
1625         WMI_10_2_PDEV_RESUME_CMDID,
1626         WMI_10_2_ADD_BCN_FILTER_CMDID,
1627         WMI_10_2_RMV_BCN_FILTER_CMDID,
1628         WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1629         WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1630         WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1631         WMI_10_2_WOW_ENABLE_CMDID,
1632         WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1633         WMI_10_2_RTT_MEASREQ_CMDID,
1634         WMI_10_2_RTT_TSF_CMDID,
1635         WMI_10_2_RTT_KEEPALIVE_CMDID,
1636         WMI_10_2_PDEV_SEND_BCN_CMDID,
1637         WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1638         WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1639         WMI_10_2_REQUEST_STATS_CMDID,
1640         WMI_10_2_GPIO_CONFIG_CMDID,
1641         WMI_10_2_GPIO_OUTPUT_CMDID,
1642         WMI_10_2_VDEV_RATEMASK_CMDID,
1643         WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1644         WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1645         WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1646         WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1647         WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1648         WMI_10_2_FORCE_FW_HANG_CMDID,
1649         WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1650         WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1651         WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1652         WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1653         WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1654         WMI_10_2_PDEV_GET_INFO,
1655         WMI_10_2_VDEV_GET_INFO,
1656         WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1657         WMI_10_2_PEER_ATF_REQUEST_CMDID,
1658         WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1659         WMI_10_2_MU_CAL_START_CMDID,
1660         WMI_10_2_SET_LTEU_CONFIG_CMDID,
1661         WMI_10_2_SET_CCA_PARAMS,
1662         WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1663         WMI_10_2_FWTEST_CMDID,
1664         WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1665         WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1666 };
1667
1668 enum wmi_10_2_event_id {
1669         WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1670         WMI_10_2_READY_EVENTID,
1671         WMI_10_2_DEBUG_MESG_EVENTID,
1672         WMI_10_2_START_EVENTID = 0x9000,
1673         WMI_10_2_END_EVENTID = 0x9FFF,
1674         WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1675         WMI_10_2_ECHO_EVENTID,
1676         WMI_10_2_UPDATE_STATS_EVENTID,
1677         WMI_10_2_INST_RSSI_STATS_EVENTID,
1678         WMI_10_2_VDEV_START_RESP_EVENTID,
1679         WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1680         WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1681         WMI_10_2_VDEV_STOPPED_EVENTID,
1682         WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1683         WMI_10_2_HOST_SWBA_EVENTID,
1684         WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1685         WMI_10_2_MGMT_RX_EVENTID,
1686         WMI_10_2_CHAN_INFO_EVENTID,
1687         WMI_10_2_PHYERR_EVENTID,
1688         WMI_10_2_ROAM_EVENTID,
1689         WMI_10_2_PROFILE_MATCH,
1690         WMI_10_2_DEBUG_PRINT_EVENTID,
1691         WMI_10_2_PDEV_QVIT_EVENTID,
1692         WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1693         WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1694         WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1695         WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1696         WMI_10_2_RTT_KEEPALIVE_EVENTID,
1697         WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1698         WMI_10_2_DCS_INTERFERENCE_EVENTID,
1699         WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1700         WMI_10_2_GPIO_INPUT_EVENTID,
1701         WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1702         WMI_10_2_GENERIC_BUFFER_EVENTID,
1703         WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1704         WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1705         WMI_10_2_WDS_PEER_EVENTID,
1706         WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1707         WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1708         WMI_10_2_MU_REPORT_EVENTID,
1709         WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1710         WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1711 };
1712
1713 enum wmi_10_4_cmd_id {
1714         WMI_10_4_START_CMDID = 0x9000,
1715         WMI_10_4_END_CMDID = 0x9FFF,
1716         WMI_10_4_INIT_CMDID,
1717         WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1718         WMI_10_4_STOP_SCAN_CMDID,
1719         WMI_10_4_SCAN_CHAN_LIST_CMDID,
1720         WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1721         WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1722         WMI_10_4_ECHO_CMDID,
1723         WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1724         WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1725         WMI_10_4_PDEV_SET_PARAM_CMDID,
1726         WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1727         WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1728         WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1729         WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1730         WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1731         WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1732         WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1733         WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1734         WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1735         WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1736         WMI_10_4_VDEV_CREATE_CMDID,
1737         WMI_10_4_VDEV_DELETE_CMDID,
1738         WMI_10_4_VDEV_START_REQUEST_CMDID,
1739         WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1740         WMI_10_4_VDEV_UP_CMDID,
1741         WMI_10_4_VDEV_STOP_CMDID,
1742         WMI_10_4_VDEV_DOWN_CMDID,
1743         WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1744         WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1745         WMI_10_4_VDEV_SET_PARAM_CMDID,
1746         WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1747         WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1748         WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1749         WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1750         WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1751         WMI_10_4_PEER_CREATE_CMDID,
1752         WMI_10_4_PEER_DELETE_CMDID,
1753         WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1754         WMI_10_4_PEER_SET_PARAM_CMDID,
1755         WMI_10_4_PEER_ASSOC_CMDID,
1756         WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1757         WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1758         WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1759         WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1760         WMI_10_4_PEER_MCAST_GROUP_CMDID,
1761         WMI_10_4_BCN_TX_CMDID,
1762         WMI_10_4_PDEV_SEND_BCN_CMDID,
1763         WMI_10_4_BCN_PRB_TMPL_CMDID,
1764         WMI_10_4_BCN_FILTER_RX_CMDID,
1765         WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1766         WMI_10_4_MGMT_TX_CMDID,
1767         WMI_10_4_PRB_TMPL_CMDID,
1768         WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1769         WMI_10_4_ADDBA_SEND_CMDID,
1770         WMI_10_4_ADDBA_STATUS_CMDID,
1771         WMI_10_4_DELBA_SEND_CMDID,
1772         WMI_10_4_ADDBA_SET_RESP_CMDID,
1773         WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1774         WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1775         WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1776         WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1777         WMI_10_4_DBGLOG_CFG_CMDID,
1778         WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1779         WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1780         WMI_10_4_PDEV_QVIT_CMDID,
1781         WMI_10_4_ROAM_SCAN_MODE,
1782         WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1783         WMI_10_4_ROAM_SCAN_PERIOD,
1784         WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1785         WMI_10_4_ROAM_AP_PROFILE,
1786         WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1787         WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1788         WMI_10_4_OFL_SCAN_PERIOD,
1789         WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1790         WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1791         WMI_10_4_P2P_GO_SET_BEACON_IE,
1792         WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1793         WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1794         WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1795         WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1796         WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1797         WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1798         WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1799         WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1800         WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1801         WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1802         WMI_10_4_PDEV_SUSPEND_CMDID,
1803         WMI_10_4_PDEV_RESUME_CMDID,
1804         WMI_10_4_ADD_BCN_FILTER_CMDID,
1805         WMI_10_4_RMV_BCN_FILTER_CMDID,
1806         WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1807         WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1808         WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1809         WMI_10_4_WOW_ENABLE_CMDID,
1810         WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1811         WMI_10_4_RTT_MEASREQ_CMDID,
1812         WMI_10_4_RTT_TSF_CMDID,
1813         WMI_10_4_RTT_KEEPALIVE_CMDID,
1814         WMI_10_4_OEM_REQ_CMDID,
1815         WMI_10_4_NAN_CMDID,
1816         WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1817         WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1818         WMI_10_4_REQUEST_STATS_CMDID,
1819         WMI_10_4_GPIO_CONFIG_CMDID,
1820         WMI_10_4_GPIO_OUTPUT_CMDID,
1821         WMI_10_4_VDEV_RATEMASK_CMDID,
1822         WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1823         WMI_10_4_GTK_OFFLOAD_CMDID,
1824         WMI_10_4_QBOOST_CFG_CMDID,
1825         WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1826         WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1827         WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1828         WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1829         WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1830         WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1831         WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1832         WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1833         WMI_10_4_FORCE_FW_HANG_CMDID,
1834         WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1835         WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1836         WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1837         WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1838         WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1839         WMI_10_4_PDEV_FIPS_CMDID,
1840         WMI_10_4_TT_SET_CONF_CMDID,
1841         WMI_10_4_FWTEST_CMDID,
1842         WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1843         WMI_10_4_PEER_ATF_REQUEST_CMDID,
1844         WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1845         WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1846         WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1847         WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1848         WMI_10_4_PDEV_GET_TPC_CMDID,
1849         WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1850         WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1851         WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1852         WMI_10_4_PDEV_GET_INFO_CMDID,
1853         WMI_10_4_VDEV_GET_INFO_CMDID,
1854         WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1855         WMI_10_4_MU_CAL_START_CMDID,
1856         WMI_10_4_SET_CCA_PARAMS_CMDID,
1857         WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1858         WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1859         WMI_10_4_VDEV_SET_IE_CMDID,
1860         WMI_10_4_SET_LTEU_CONFIG_CMDID,
1861         WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1862         WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1863         WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1864         WMI_10_4_PEER_BWF_REQUEST_CMDID,
1865         WMI_10_4_BTCOEX_CFG_CMDID,
1866         WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1867         WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1868         WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1869         WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1870         WMI_10_4_COEX_VERSION_CFG_CMID,
1871         WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1872         WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1873         WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1874         WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1875         WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1876         WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1877         WMI_10_4_GET_TSF_TIMER_CMDID,
1878         WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1879         WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1880         WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1881         WMI_10_4_TDLS_SET_STATE_CMDID,
1882         WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1883         WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1884         WMI_10_4_PDEV_SEND_FD_CMDID,
1885         WMI_10_4_ENABLE_FILS_CMDID,
1886         WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1887         WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1888         WMI_10_4_RADAR_FOUND_CMDID,
1889         WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1890         WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1891         WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1892 };
1893
1894 enum wmi_10_4_event_id {
1895         WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1896         WMI_10_4_READY_EVENTID,
1897         WMI_10_4_DEBUG_MESG_EVENTID,
1898         WMI_10_4_START_EVENTID = 0x9000,
1899         WMI_10_4_END_EVENTID = 0x9FFF,
1900         WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1901         WMI_10_4_ECHO_EVENTID,
1902         WMI_10_4_UPDATE_STATS_EVENTID,
1903         WMI_10_4_INST_RSSI_STATS_EVENTID,
1904         WMI_10_4_VDEV_START_RESP_EVENTID,
1905         WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1906         WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1907         WMI_10_4_VDEV_STOPPED_EVENTID,
1908         WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1909         WMI_10_4_HOST_SWBA_EVENTID,
1910         WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1911         WMI_10_4_MGMT_RX_EVENTID,
1912         WMI_10_4_CHAN_INFO_EVENTID,
1913         WMI_10_4_PHYERR_EVENTID,
1914         WMI_10_4_ROAM_EVENTID,
1915         WMI_10_4_PROFILE_MATCH,
1916         WMI_10_4_DEBUG_PRINT_EVENTID,
1917         WMI_10_4_PDEV_QVIT_EVENTID,
1918         WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1919         WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1920         WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1921         WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1922         WMI_10_4_RTT_KEEPALIVE_EVENTID,
1923         WMI_10_4_OEM_CAPABILITY_EVENTID,
1924         WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1925         WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1926         WMI_10_4_NAN_EVENTID,
1927         WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1928         WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1929         WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1930         WMI_10_4_DCS_INTERFERENCE_EVENTID,
1931         WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1932         WMI_10_4_CSA_HANDLING_EVENTID,
1933         WMI_10_4_GPIO_INPUT_EVENTID,
1934         WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1935         WMI_10_4_GENERIC_BUFFER_EVENTID,
1936         WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1937         WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1938         WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1939         WMI_10_4_WDS_PEER_EVENTID,
1940         WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1941         WMI_10_4_PDEV_FIPS_EVENTID,
1942         WMI_10_4_TT_STATS_EVENTID,
1943         WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1944         WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1945         WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1946         WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1947         WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1948         WMI_10_4_PDEV_TPC_EVENTID,
1949         WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1950         WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1951         WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1952         WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1953         WMI_10_4_MU_REPORT_EVENTID,
1954         WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1955         WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1956         WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1957         WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1958         WMI_10_4_ATF_PEER_STATS_EVENTID,
1959         WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1960         WMI_10_4_NAC_RSSI_EVENTID,
1961         WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1962         WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1963         WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1964         WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1965         WMI_10_4_TDLS_PEER_EVENTID,
1966         WMI_10_4_HOST_SWFDA_EVENTID,
1967         WMI_10_4_ESP_ESTIMATE_EVENTID,
1968         WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1969         WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1970 };
1971
1972 enum wmi_phy_mode {
1973         MODE_11A        = 0,   /* 11a Mode */
1974         MODE_11G        = 1,   /* 11b/g Mode */
1975         MODE_11B        = 2,   /* 11b Mode */
1976         MODE_11GONLY    = 3,   /* 11g only Mode */
1977         MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
1978         MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
1979         MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
1980         MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
1981         MODE_11AC_VHT20 = 8,
1982         MODE_11AC_VHT40 = 9,
1983         MODE_11AC_VHT80 = 10,
1984         /*    MODE_11AC_VHT160 = 11, */
1985         MODE_11AC_VHT20_2G = 11,
1986         MODE_11AC_VHT40_2G = 12,
1987         MODE_11AC_VHT80_2G = 13,
1988         MODE_11AC_VHT80_80 = 14,
1989         MODE_11AC_VHT160 = 15,
1990         MODE_UNKNOWN    = 16,
1991         MODE_MAX        = 16
1992 };
1993
1994 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1995 {
1996         switch (mode) {
1997         case MODE_11A:
1998                 return "11a";
1999         case MODE_11G:
2000                 return "11g";
2001         case MODE_11B:
2002                 return "11b";
2003         case MODE_11GONLY:
2004                 return "11gonly";
2005         case MODE_11NA_HT20:
2006                 return "11na-ht20";
2007         case MODE_11NG_HT20:
2008                 return "11ng-ht20";
2009         case MODE_11NA_HT40:
2010                 return "11na-ht40";
2011         case MODE_11NG_HT40:
2012                 return "11ng-ht40";
2013         case MODE_11AC_VHT20:
2014                 return "11ac-vht20";
2015         case MODE_11AC_VHT40:
2016                 return "11ac-vht40";
2017         case MODE_11AC_VHT80:
2018                 return "11ac-vht80";
2019         case MODE_11AC_VHT160:
2020                 return "11ac-vht160";
2021         case MODE_11AC_VHT80_80:
2022                 return "11ac-vht80+80";
2023         case MODE_11AC_VHT20_2G:
2024                 return "11ac-vht20-2g";
2025         case MODE_11AC_VHT40_2G:
2026                 return "11ac-vht40-2g";
2027         case MODE_11AC_VHT80_2G:
2028                 return "11ac-vht80-2g";
2029         case MODE_UNKNOWN:
2030                 /* skip */
2031                 break;
2032
2033                 /* no default handler to allow compiler to check that the
2034                  * enum is fully handled
2035                  */
2036         }
2037
2038         return "<unknown>";
2039 }
2040
2041 #define WMI_CHAN_LIST_TAG       0x1
2042 #define WMI_SSID_LIST_TAG       0x2
2043 #define WMI_BSSID_LIST_TAG      0x3
2044 #define WMI_IE_TAG              0x4
2045
2046 struct wmi_channel {
2047         __le32 mhz;
2048         __le32 band_center_freq1;
2049         __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2050         union {
2051                 __le32 flags; /* WMI_CHAN_FLAG_ */
2052                 struct {
2053                         u8 mode; /* only 6 LSBs */
2054                 } __packed;
2055         } __packed;
2056         union {
2057                 __le32 reginfo0;
2058                 struct {
2059                         /* note: power unit is 0.5 dBm */
2060                         u8 min_power;
2061                         u8 max_power;
2062                         u8 reg_power;
2063                         u8 reg_classid;
2064                 } __packed;
2065         } __packed;
2066         union {
2067                 __le32 reginfo1;
2068                 struct {
2069                         /* note: power unit is 1 dBm */
2070                         u8 antenna_max;
2071                         /* note: power unit is 0.5 dBm */
2072                         u8 max_tx_power;
2073                 } __packed;
2074         } __packed;
2075 } __packed;
2076
2077 struct wmi_channel_arg {
2078         u32 freq;
2079         u32 band_center_freq1;
2080         u32 band_center_freq2;
2081         bool passive;
2082         bool allow_ibss;
2083         bool allow_ht;
2084         bool allow_vht;
2085         bool ht40plus;
2086         bool chan_radar;
2087         /* note: power unit is 0.5 dBm */
2088         u32 min_power;
2089         u32 max_power;
2090         u32 max_reg_power;
2091         /* note: power unit is 1 dBm */
2092         u32 max_antenna_gain;
2093         u32 reg_class_id;
2094         enum wmi_phy_mode mode;
2095 };
2096
2097 enum wmi_channel_change_cause {
2098         WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2099         WMI_CHANNEL_CHANGE_CAUSE_CSA,
2100 };
2101
2102 #define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)
2103 #define WMI_CHAN_FLAG_PASSIVE        (1 << 7)
2104 #define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)
2105 #define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)
2106 #define WMI_CHAN_FLAG_DFS            (1 << 10)
2107 #define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)
2108 #define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)
2109
2110 /* Indicate reason for channel switch */
2111 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2112 /* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2113 #define WMI_CHAN_FLAG_DFS_CFREQ2  (1 << 15)
2114 #define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */
2115
2116 /* HT Capabilities*/
2117 #define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
2118 #define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */
2119 #define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
2120 #define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
2121 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
2122 #define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
2123 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
2124 #define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
2125 #define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
2126 #define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
2127 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2128 #define WMI_HT_CAP_HT40_SGI               0x0800
2129 #define WMI_HT_CAP_RX_LDPC                0x1000   /* LDPC RX support */
2130 #define WMI_HT_CAP_TX_LDPC                0x2000   /* LDPC TX support */
2131
2132 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
2133                                 WMI_HT_CAP_HT20_SGI      | \
2134                                 WMI_HT_CAP_HT40_SGI      | \
2135                                 WMI_HT_CAP_TX_STBC       | \
2136                                 WMI_HT_CAP_RX_STBC       | \
2137                                 WMI_HT_CAP_LDPC)
2138
2139 /*
2140  * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2141  * field. The fields not defined here are not supported, or reserved.
2142  * Do not change these masks and if you have to add new one follow the
2143  * bitmask as specified by 802.11ac draft.
2144  */
2145
2146 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
2147 #define WMI_VHT_CAP_RX_LDPC                      0x00000010
2148 #define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
2149 #define WMI_VHT_CAP_SGI_160MHZ                   0x00000040
2150 #define WMI_VHT_CAP_TX_STBC                      0x00000080
2151 #define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
2152 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
2153 #define WMI_VHT_CAP_SU_BFER                      0x00000800
2154 #define WMI_VHT_CAP_SU_BFEE                      0x00001000
2155 #define WMI_VHT_CAP_MAX_CS_ANT_MASK              0x0000E000
2156 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT        13
2157 #define WMI_VHT_CAP_MAX_SND_DIM_MASK             0x00070000
2158 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT       16
2159 #define WMI_VHT_CAP_MU_BFER                      0x00080000
2160 #define WMI_VHT_CAP_MU_BFEE                      0x00100000
2161 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
2162 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
2163 #define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
2164 #define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000
2165
2166 /* The following also refer for max HT AMSDU */
2167 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x00000000
2168 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
2169 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002
2170
2171 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
2172                                  WMI_VHT_CAP_RX_LDPC             | \
2173                                  WMI_VHT_CAP_SGI_80MHZ           | \
2174                                  WMI_VHT_CAP_TX_STBC             | \
2175                                  WMI_VHT_CAP_RX_STBC_MASK        | \
2176                                  WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \
2177                                  WMI_VHT_CAP_RX_FIXED_ANT        | \
2178                                  WMI_VHT_CAP_TX_FIXED_ANT)
2179
2180 /*
2181  * Interested readers refer to Rx/Tx MCS Map definition as defined in
2182  * 802.11ac
2183  */
2184 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))
2185 #define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
2186 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16
2187
2188 enum {
2189         REGDMN_MODE_11A              = 0x00001, /* 11a channels */
2190         REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */
2191         REGDMN_MODE_11B              = 0x00004, /* 11b channels */
2192         REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */
2193         REGDMN_MODE_11G              = 0x00008, /* XXX historical */
2194         REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */
2195         REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */
2196         REGDMN_MODE_XR               = 0x00100, /* XR channels */
2197         REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */
2198         REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2199         REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */
2200         REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */
2201         REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */
2202         REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */
2203         REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */
2204         REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */
2205         REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */
2206         REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */
2207         REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */
2208         REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */
2209         REGDMN_MODE_11AC_VHT160      = 0x200000,     /* 5Ghz, VHT160 channels */
2210         REGDMN_MODE_11AC_VHT80_80    = 0x400000,     /* 5Ghz, VHT80+80 channels */
2211         REGDMN_MODE_ALL              = 0xffffffff
2212 };
2213
2214 #define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
2215 #define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
2216 #define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004
2217
2218 /* regulatory capabilities */
2219 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
2220 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
2221 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
2222 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
2223 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
2224 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
2225
2226 struct hal_reg_capabilities {
2227         /* regdomain value specified in EEPROM */
2228         __le32 eeprom_rd;
2229         /*regdomain */
2230         __le32 eeprom_rd_ext;
2231         /* CAP1 capabilities bit map. */
2232         __le32 regcap1;
2233         /* REGDMN EEPROM CAP. */
2234         __le32 regcap2;
2235         /* REGDMN MODE */
2236         __le32 wireless_modes;
2237         __le32 low_2ghz_chan;
2238         __le32 high_2ghz_chan;
2239         __le32 low_5ghz_chan;
2240         __le32 high_5ghz_chan;
2241 } __packed;
2242
2243 enum wlan_mode_capability {
2244         WHAL_WLAN_11A_CAPABILITY   = 0x1,
2245         WHAL_WLAN_11G_CAPABILITY   = 0x2,
2246         WHAL_WLAN_11AG_CAPABILITY  = 0x3,
2247 };
2248
2249 /* structure used by FW for requesting host memory */
2250 struct wlan_host_mem_req {
2251         /* ID of the request */
2252         __le32 req_id;
2253         /* size of the  of each unit */
2254         __le32 unit_size;
2255         /* flags to  indicate that
2256          * the number units is dependent
2257          * on number of resources(num vdevs num peers .. etc)
2258          */
2259         __le32 num_unit_info;
2260         /*
2261          * actual number of units to allocate . if flags in the num_unit_info
2262          * indicate that number of units is tied to number of a particular
2263          * resource to allocate then  num_units filed is set to 0 and host
2264          * will derive the number units from number of the resources it is
2265          * requesting.
2266          */
2267         __le32 num_units;
2268 } __packed;
2269
2270 /*
2271  * The following struct holds optional payload for
2272  * wmi_service_ready_event,e.g., 11ac pass some of the
2273  * device capability to the host.
2274  */
2275 struct wmi_service_ready_event {
2276         __le32 sw_version;
2277         __le32 sw_version_1;
2278         __le32 abi_version;
2279         /* WMI_PHY_CAPABILITY */
2280         __le32 phy_capability;
2281         /* Maximum number of frag table entries that SW will populate less 1 */
2282         __le32 max_frag_entry;
2283         __le32 wmi_service_bitmap[16];
2284         __le32 num_rf_chains;
2285         /*
2286          * The following field is only valid for service type
2287          * WMI_SERVICE_11AC
2288          */
2289         __le32 ht_cap_info; /* WMI HT Capability */
2290         __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2291         __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2292         __le32 hw_min_tx_power;
2293         __le32 hw_max_tx_power;
2294         struct hal_reg_capabilities hal_reg_capabilities;
2295         __le32 sys_cap_info;
2296         __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2297         /*
2298          * Max beacon and Probe Response IE offload size
2299          * (includes optional P2P IEs)
2300          */
2301         __le32 max_bcn_ie_size;
2302         /*
2303          * request to host to allocate a chuck of memory and pss it down to FW
2304          * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2305          * data structures. Only valid for low latency interfaces like PCIE
2306          * where FW can access this memory directly (or) by DMA.
2307          */
2308         __le32 num_mem_reqs;
2309         struct wlan_host_mem_req mem_reqs[];
2310 } __packed;
2311
2312 /* This is the definition from 10.X firmware branch */
2313 struct wmi_10x_service_ready_event {
2314         __le32 sw_version;
2315         __le32 abi_version;
2316
2317         /* WMI_PHY_CAPABILITY */
2318         __le32 phy_capability;
2319
2320         /* Maximum number of frag table entries that SW will populate less 1 */
2321         __le32 max_frag_entry;
2322         __le32 wmi_service_bitmap[16];
2323         __le32 num_rf_chains;
2324
2325         /*
2326          * The following field is only valid for service type
2327          * WMI_SERVICE_11AC
2328          */
2329         __le32 ht_cap_info; /* WMI HT Capability */
2330         __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2331         __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2332         __le32 hw_min_tx_power;
2333         __le32 hw_max_tx_power;
2334
2335         struct hal_reg_capabilities hal_reg_capabilities;
2336
2337         __le32 sys_cap_info;
2338         __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2339
2340         /*
2341          * request to host to allocate a chuck of memory and pss it down to FW
2342          * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2343          * data structures. Only valid for low latency interfaces like PCIE
2344          * where FW can access this memory directly (or) by DMA.
2345          */
2346         __le32 num_mem_reqs;
2347
2348         struct wlan_host_mem_req mem_reqs[];
2349 } __packed;
2350
2351 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2352 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2353
2354 struct wmi_ready_event {
2355         __le32 sw_version;
2356         __le32 abi_version;
2357         struct wmi_mac_addr mac_addr;
2358         __le32 status;
2359 } __packed;
2360
2361 struct wmi_resource_config {
2362         /* number of virtual devices (VAPs) to support */
2363         __le32 num_vdevs;
2364
2365         /* number of peer nodes to support */
2366         __le32 num_peers;
2367
2368         /*
2369          * In offload mode target supports features like WOW, chatter and
2370          * other protocol offloads. In order to support them some
2371          * functionalities like reorder buffering, PN checking need to be
2372          * done in target. This determines maximum number of peers supported
2373          * by target in offload mode
2374          */
2375         __le32 num_offload_peers;
2376
2377         /* For target-based RX reordering */
2378         __le32 num_offload_reorder_bufs;
2379
2380         /* number of keys per peer */
2381         __le32 num_peer_keys;
2382
2383         /* total number of TX/RX data TIDs */
2384         __le32 num_tids;
2385
2386         /*
2387          * max skid for resolving hash collisions
2388          *
2389          *   The address search table is sparse, so that if two MAC addresses
2390          *   result in the same hash value, the second of these conflicting
2391          *   entries can slide to the next index in the address search table,
2392          *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2393          *   specifies the upper bound on how many subsequent indices to search
2394          *   over to find an unoccupied space.
2395          */
2396         __le32 ast_skid_limit;
2397
2398         /*
2399          * the nominal chain mask for transmit
2400          *
2401          *   The chain mask may be modified dynamically, e.g. to operate AP
2402          *   tx with a reduced number of chains if no clients are associated.
2403          *   This configuration parameter specifies the nominal chain-mask that
2404          *   should be used when not operating with a reduced set of tx chains.
2405          */
2406         __le32 tx_chain_mask;
2407
2408         /*
2409          * the nominal chain mask for receive
2410          *
2411          *   The chain mask may be modified dynamically, e.g. for a client
2412          *   to use a reduced number of chains for receive if the traffic to
2413          *   the client is low enough that it doesn't require downlink MIMO
2414          *   or antenna diversity.
2415          *   This configuration parameter specifies the nominal chain-mask that
2416          *   should be used when not operating with a reduced set of rx chains.
2417          */
2418         __le32 rx_chain_mask;
2419
2420         /*
2421          * what rx reorder timeout (ms) to use for the AC
2422          *
2423          *   Each WMM access class (voice, video, best-effort, background) will
2424          *   have its own timeout value to dictate how long to wait for missing
2425          *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2426          *   already been received.
2427          *   This parameter specifies the timeout in milliseconds for each
2428          *   class.
2429          */
2430         __le32 rx_timeout_pri_vi;
2431         __le32 rx_timeout_pri_vo;
2432         __le32 rx_timeout_pri_be;
2433         __le32 rx_timeout_pri_bk;
2434
2435         /*
2436          * what mode the rx should decap packets to
2437          *
2438          *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2439          *   THis setting also determines the default TX behavior, however TX
2440          *   behavior can be modified on a per VAP basis during VAP init
2441          */
2442         __le32 rx_decap_mode;
2443
2444         /* what is the maximum number of scan requests that can be queued */
2445         __le32 scan_max_pending_reqs;
2446
2447         /* maximum VDEV that could use BMISS offload */
2448         __le32 bmiss_offload_max_vdev;
2449
2450         /* maximum VDEV that could use offload roaming */
2451         __le32 roam_offload_max_vdev;
2452
2453         /* maximum AP profiles that would push to offload roaming */
2454         __le32 roam_offload_max_ap_profiles;
2455
2456         /*
2457          * how many groups to use for mcast->ucast conversion
2458          *
2459          *   The target's WAL maintains a table to hold information regarding
2460          *   which peers belong to a given multicast group, so that if
2461          *   multicast->unicast conversion is enabled, the target can convert
2462          *   multicast tx frames to a series of unicast tx frames, to each
2463          *   peer within the multicast group.
2464              This num_mcast_groups configuration parameter tells the target how
2465          *   many multicast groups to provide storage for within its multicast
2466          *   group membership table.
2467          */
2468         __le32 num_mcast_groups;
2469
2470         /*
2471          * size to alloc for the mcast membership table
2472          *
2473          *   This num_mcast_table_elems configuration parameter tells the
2474          *   target how many peer elements it needs to provide storage for in
2475          *   its multicast group membership table.
2476          *   These multicast group membership table elements are shared by the
2477          *   multicast groups stored within the table.
2478          */
2479         __le32 num_mcast_table_elems;
2480
2481         /*
2482          * whether/how to do multicast->unicast conversion
2483          *
2484          *   This configuration parameter specifies whether the target should
2485          *   perform multicast --> unicast conversion on transmit, and if so,
2486          *   what to do if it finds no entries in its multicast group
2487          *   membership table for the multicast IP address in the tx frame.
2488          *   Configuration value:
2489          *   0 -> Do not perform multicast to unicast conversion.
2490          *   1 -> Convert multicast frames to unicast, if the IP multicast
2491          *        address from the tx frame is found in the multicast group
2492          *        membership table.  If the IP multicast address is not found,
2493          *        drop the frame.
2494          *   2 -> Convert multicast frames to unicast, if the IP multicast
2495          *        address from the tx frame is found in the multicast group
2496          *        membership table.  If the IP multicast address is not found,
2497          *        transmit the frame as multicast.
2498          */
2499         __le32 mcast2ucast_mode;
2500
2501         /*
2502          * how much memory to allocate for a tx PPDU dbg log
2503          *
2504          *   This parameter controls how much memory the target will allocate
2505          *   to store a log of tx PPDU meta-information (how large the PPDU
2506          *   was, when it was sent, whether it was successful, etc.)
2507          */
2508         __le32 tx_dbg_log_size;
2509
2510         /* how many AST entries to be allocated for WDS */
2511         __le32 num_wds_entries;
2512
2513         /*
2514          * MAC DMA burst size, e.g., For target PCI limit can be
2515          * 0 -default, 1 256B
2516          */
2517         __le32 dma_burst_size;
2518
2519         /*
2520          * Fixed delimiters to be inserted after every MPDU to
2521          * account for interface latency to avoid underrun.
2522          */
2523         __le32 mac_aggr_delim;
2524
2525         /*
2526          *   determine whether target is responsible for detecting duplicate
2527          *   non-aggregate MPDU and timing out stale fragments.
2528          *
2529          *   A-MPDU reordering is always performed on the target.
2530          *
2531          *   0: target responsible for frag timeout and dup checking
2532          *   1: host responsible for frag timeout and dup checking
2533          */
2534         __le32 rx_skip_defrag_timeout_dup_detection_check;
2535
2536         /*
2537          * Configuration for VoW :
2538          * No of Video Nodes to be supported
2539          * and Max no of descriptors for each Video link (node).
2540          */
2541         __le32 vow_config;
2542
2543         /* maximum VDEV that could use GTK offload */
2544         __le32 gtk_offload_max_vdev;
2545
2546         /* Number of msdu descriptors target should use */
2547         __le32 num_msdu_desc;
2548
2549         /*
2550          * Max. number of Tx fragments per MSDU
2551          *  This parameter controls the max number of Tx fragments per MSDU.
2552          *  This is sent by the target as part of the WMI_SERVICE_READY event
2553          *  and is overridden by the OS shim as required.
2554          */
2555         __le32 max_frag_entries;
2556 } __packed;
2557
2558 struct wmi_resource_config_10x {
2559         /* number of virtual devices (VAPs) to support */
2560         __le32 num_vdevs;
2561
2562         /* number of peer nodes to support */
2563         __le32 num_peers;
2564
2565         /* number of keys per peer */
2566         __le32 num_peer_keys;
2567
2568         /* total number of TX/RX data TIDs */
2569         __le32 num_tids;
2570
2571         /*
2572          * max skid for resolving hash collisions
2573          *
2574          *   The address search table is sparse, so that if two MAC addresses
2575          *   result in the same hash value, the second of these conflicting
2576          *   entries can slide to the next index in the address search table,
2577          *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2578          *   specifies the upper bound on how many subsequent indices to search
2579          *   over to find an unoccupied space.
2580          */
2581         __le32 ast_skid_limit;
2582
2583         /*
2584          * the nominal chain mask for transmit
2585          *
2586          *   The chain mask may be modified dynamically, e.g. to operate AP
2587          *   tx with a reduced number of chains if no clients are associated.
2588          *   This configuration parameter specifies the nominal chain-mask that
2589          *   should be used when not operating with a reduced set of tx chains.
2590          */
2591         __le32 tx_chain_mask;
2592
2593         /*
2594          * the nominal chain mask for receive
2595          *
2596          *   The chain mask may be modified dynamically, e.g. for a client
2597          *   to use a reduced number of chains for receive if the traffic to
2598          *   the client is low enough that it doesn't require downlink MIMO
2599          *   or antenna diversity.
2600          *   This configuration parameter specifies the nominal chain-mask that
2601          *   should be used when not operating with a reduced set of rx chains.
2602          */
2603         __le32 rx_chain_mask;
2604
2605         /*
2606          * what rx reorder timeout (ms) to use for the AC
2607          *
2608          *   Each WMM access class (voice, video, best-effort, background) will
2609          *   have its own timeout value to dictate how long to wait for missing
2610          *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2611          *   already been received.
2612          *   This parameter specifies the timeout in milliseconds for each
2613          *   class.
2614          */
2615         __le32 rx_timeout_pri_vi;
2616         __le32 rx_timeout_pri_vo;
2617         __le32 rx_timeout_pri_be;
2618         __le32 rx_timeout_pri_bk;
2619
2620         /*
2621          * what mode the rx should decap packets to
2622          *
2623          *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2624          *   THis setting also determines the default TX behavior, however TX
2625          *   behavior can be modified on a per VAP basis during VAP init
2626          */
2627         __le32 rx_decap_mode;
2628
2629         /* what is the maximum number of scan requests that can be queued */
2630         __le32 scan_max_pending_reqs;
2631
2632         /* maximum VDEV that could use BMISS offload */
2633         __le32 bmiss_offload_max_vdev;
2634
2635         /* maximum VDEV that could use offload roaming */
2636         __le32 roam_offload_max_vdev;
2637
2638         /* maximum AP profiles that would push to offload roaming */
2639         __le32 roam_offload_max_ap_profiles;
2640
2641         /*
2642          * how many groups to use for mcast->ucast conversion
2643          *
2644          *   The target's WAL maintains a table to hold information regarding
2645          *   which peers belong to a given multicast group, so that if
2646          *   multicast->unicast conversion is enabled, the target can convert
2647          *   multicast tx frames to a series of unicast tx frames, to each
2648          *   peer within the multicast group.
2649              This num_mcast_groups configuration parameter tells the target how
2650          *   many multicast groups to provide storage for within its multicast
2651          *   group membership table.
2652          */
2653         __le32 num_mcast_groups;
2654
2655         /*
2656          * size to alloc for the mcast membership table
2657          *
2658          *   This num_mcast_table_elems configuration parameter tells the
2659          *   target how many peer elements it needs to provide storage for in
2660          *   its multicast group membership table.
2661          *   These multicast group membership table elements are shared by the
2662          *   multicast groups stored within the table.
2663          */
2664         __le32 num_mcast_table_elems;
2665
2666         /*
2667          * whether/how to do multicast->unicast conversion
2668          *
2669          *   This configuration parameter specifies whether the target should
2670          *   perform multicast --> unicast conversion on transmit, and if so,
2671          *   what to do if it finds no entries in its multicast group
2672          *   membership table for the multicast IP address in the tx frame.
2673          *   Configuration value:
2674          *   0 -> Do not perform multicast to unicast conversion.
2675          *   1 -> Convert multicast frames to unicast, if the IP multicast
2676          *        address from the tx frame is found in the multicast group
2677          *        membership table.  If the IP multicast address is not found,
2678          *        drop the frame.
2679          *   2 -> Convert multicast frames to unicast, if the IP multicast
2680          *        address from the tx frame is found in the multicast group
2681          *        membership table.  If the IP multicast address is not found,
2682          *        transmit the frame as multicast.
2683          */
2684         __le32 mcast2ucast_mode;
2685
2686         /*
2687          * how much memory to allocate for a tx PPDU dbg log
2688          *
2689          *   This parameter controls how much memory the target will allocate
2690          *   to store a log of tx PPDU meta-information (how large the PPDU
2691          *   was, when it was sent, whether it was successful, etc.)
2692          */
2693         __le32 tx_dbg_log_size;
2694
2695         /* how many AST entries to be allocated for WDS */
2696         __le32 num_wds_entries;
2697
2698         /*
2699          * MAC DMA burst size, e.g., For target PCI limit can be
2700          * 0 -default, 1 256B
2701          */
2702         __le32 dma_burst_size;
2703
2704         /*
2705          * Fixed delimiters to be inserted after every MPDU to
2706          * account for interface latency to avoid underrun.
2707          */
2708         __le32 mac_aggr_delim;
2709
2710         /*
2711          *   determine whether target is responsible for detecting duplicate
2712          *   non-aggregate MPDU and timing out stale fragments.
2713          *
2714          *   A-MPDU reordering is always performed on the target.
2715          *
2716          *   0: target responsible for frag timeout and dup checking
2717          *   1: host responsible for frag timeout and dup checking
2718          */
2719         __le32 rx_skip_defrag_timeout_dup_detection_check;
2720
2721         /*
2722          * Configuration for VoW :
2723          * No of Video Nodes to be supported
2724          * and Max no of descriptors for each Video link (node).
2725          */
2726         __le32 vow_config;
2727
2728         /* Number of msdu descriptors target should use */
2729         __le32 num_msdu_desc;
2730
2731         /*
2732          * Max. number of Tx fragments per MSDU
2733          *  This parameter controls the max number of Tx fragments per MSDU.
2734          *  This is sent by the target as part of the WMI_SERVICE_READY event
2735          *  and is overridden by the OS shim as required.
2736          */
2737         __le32 max_frag_entries;
2738 } __packed;
2739
2740 enum wmi_10_2_feature_mask {
2741         WMI_10_2_RX_BATCH_MODE = BIT(0),
2742         WMI_10_2_ATF_CONFIG    = BIT(1),
2743         WMI_10_2_COEX_GPIO     = BIT(3),
2744         WMI_10_2_BSS_CHAN_INFO = BIT(6),
2745         WMI_10_2_PEER_STATS    = BIT(7),
2746 };
2747
2748 struct wmi_resource_config_10_2 {
2749         struct wmi_resource_config_10x common;
2750         __le32 max_peer_ext_stats;
2751         __le32 smart_ant_cap; /* 0-disable, 1-enable */
2752         __le32 bk_min_free;
2753         __le32 be_min_free;
2754         __le32 vi_min_free;
2755         __le32 vo_min_free;
2756         __le32 feature_mask;
2757 } __packed;
2758
2759 #define NUM_UNITS_IS_NUM_VDEVS         BIT(0)
2760 #define NUM_UNITS_IS_NUM_PEERS         BIT(1)
2761 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS  BIT(2)
2762
2763 struct wmi_resource_config_10_4 {
2764         /* Number of virtual devices (VAPs) to support */
2765         __le32 num_vdevs;
2766
2767         /* Number of peer nodes to support */
2768         __le32 num_peers;
2769
2770         /* Number of active peer nodes to support */
2771         __le32 num_active_peers;
2772
2773         /* In offload mode, target supports features like WOW, chatter and other
2774          * protocol offloads. In order to support them some functionalities like
2775          * reorder buffering, PN checking need to be done in target.
2776          * This determines maximum number of peers supported by target in
2777          * offload mode.
2778          */
2779         __le32 num_offload_peers;
2780
2781         /* Number of reorder buffers available for doing target based reorder
2782          * Rx reorder buffering
2783          */
2784         __le32 num_offload_reorder_buffs;
2785
2786         /* Number of keys per peer */
2787         __le32 num_peer_keys;
2788
2789         /* Total number of TX/RX data TIDs */
2790         __le32 num_tids;
2791
2792         /* Max skid for resolving hash collisions.
2793          * The address search table is sparse, so that if two MAC addresses
2794          * result in the same hash value, the second of these conflicting
2795          * entries can slide to the next index in the address search table,
2796          * and use it, if it is unoccupied.  This ast_skid_limit parameter
2797          * specifies the upper bound on how many subsequent indices to search
2798          * over to find an unoccupied space.
2799          */
2800         __le32 ast_skid_limit;
2801
2802         /* The nominal chain mask for transmit.
2803          * The chain mask may be modified dynamically, e.g. to operate AP tx
2804          * with a reduced number of chains if no clients are associated.
2805          * This configuration parameter specifies the nominal chain-mask that
2806          * should be used when not operating with a reduced set of tx chains.
2807          */
2808         __le32 tx_chain_mask;
2809
2810         /* The nominal chain mask for receive.
2811          * The chain mask may be modified dynamically, e.g. for a client to use
2812          * a reduced number of chains for receive if the traffic to the client
2813          * is low enough that it doesn't require downlink MIMO or antenna
2814          * diversity. This configuration parameter specifies the nominal
2815          * chain-mask that should be used when not operating with a reduced
2816          * set of rx chains.
2817          */
2818         __le32 rx_chain_mask;
2819
2820         /* What rx reorder timeout (ms) to use for the AC.
2821          * Each WMM access class (voice, video, best-effort, background) will
2822          * have its own timeout value to dictate how long to wait for missing
2823          * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2824          * been received. This parameter specifies the timeout in milliseconds
2825          * for each class.
2826          */
2827         __le32 rx_timeout_pri[4];
2828
2829         /* What mode the rx should decap packets to.
2830          * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2831          * This setting also determines the default TX behavior, however TX
2832          * behavior can be modified on a per VAP basis during VAP init
2833          */
2834         __le32 rx_decap_mode;
2835
2836         __le32 scan_max_pending_req;
2837
2838         __le32 bmiss_offload_max_vdev;
2839
2840         __le32 roam_offload_max_vdev;
2841
2842         __le32 roam_offload_max_ap_profiles;
2843
2844         /* How many groups to use for mcast->ucast conversion.
2845          * The target's WAL maintains a table to hold information regarding
2846          * which peers belong to a given multicast group, so that if
2847          * multicast->unicast conversion is enabled, the target can convert
2848          * multicast tx frames to a series of unicast tx frames, to each peer
2849          * within the multicast group. This num_mcast_groups configuration
2850          * parameter tells the target how many multicast groups to provide
2851          * storage for within its multicast group membership table.
2852          */
2853         __le32 num_mcast_groups;
2854
2855         /* Size to alloc for the mcast membership table.
2856          * This num_mcast_table_elems configuration parameter tells the target
2857          * how many peer elements it needs to provide storage for in its
2858          * multicast group membership table. These multicast group membership
2859          * table elements are shared by the multicast groups stored within
2860          * the table.
2861          */
2862         __le32 num_mcast_table_elems;
2863
2864         /* Whether/how to do multicast->unicast conversion.
2865          * This configuration parameter specifies whether the target should
2866          * perform multicast --> unicast conversion on transmit, and if so,
2867          * what to do if it finds no entries in its multicast group membership
2868          * table for the multicast IP address in the tx frame.
2869          * Configuration value:
2870          * 0 -> Do not perform multicast to unicast conversion.
2871          * 1 -> Convert multicast frames to unicast, if the IP multicast address
2872          *      from the tx frame is found in the multicast group membership
2873          *      table.  If the IP multicast address is not found, drop the frame
2874          * 2 -> Convert multicast frames to unicast, if the IP multicast address
2875          *      from the tx frame is found in the multicast group membership
2876          *      table.  If the IP multicast address is not found, transmit the
2877          *      frame as multicast.
2878          */
2879         __le32 mcast2ucast_mode;
2880
2881         /* How much memory to allocate for a tx PPDU dbg log.
2882          * This parameter controls how much memory the target will allocate to
2883          * store a log of tx PPDU meta-information (how large the PPDU was,
2884          * when it was sent, whether it was successful, etc.)
2885          */
2886         __le32 tx_dbg_log_size;
2887
2888         /* How many AST entries to be allocated for WDS */
2889         __le32 num_wds_entries;
2890
2891         /* MAC DMA burst size. 0 -default, 1 -256B */
2892         __le32 dma_burst_size;
2893
2894         /* Fixed delimiters to be inserted after every MPDU to account for
2895          * interface latency to avoid underrun.
2896          */
2897         __le32 mac_aggr_delim;
2898
2899         /* Determine whether target is responsible for detecting duplicate
2900          * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2901          * is always performed on the target.
2902          *
2903          * 0: target responsible for frag timeout and dup checking
2904          * 1: host responsible for frag timeout and dup checking
2905          */
2906         __le32 rx_skip_defrag_timeout_dup_detection_check;
2907
2908         /* Configuration for VoW : No of Video nodes to be supported and max
2909          * no of descriptors for each video link (node).
2910          */
2911         __le32 vow_config;
2912
2913         /* Maximum vdev that could use gtk offload */
2914         __le32 gtk_offload_max_vdev;
2915
2916         /* Number of msdu descriptors target should use */
2917         __le32 num_msdu_desc;
2918
2919         /* Max number of tx fragments per MSDU.
2920          * This parameter controls the max number of tx fragments per MSDU.
2921          * This will passed by target as part of the WMI_SERVICE_READY event
2922          * and is overridden by the OS shim as required.
2923          */
2924         __le32 max_frag_entries;
2925
2926         /* Max number of extended peer stats.
2927          * This parameter controls the max number of peers for which extended
2928          * statistics are supported by target
2929          */
2930         __le32 max_peer_ext_stats;
2931
2932         /* Smart antenna capabilities information.
2933          * 1 - Smart antenna is enabled
2934          * 0 - Smart antenna is disabled
2935          * In future this can contain smart antenna specific capabilities.
2936          */
2937         __le32 smart_ant_cap;
2938
2939         /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2940          * during init.
2941          */
2942         __le32 bk_minfree;
2943         __le32 be_minfree;
2944         __le32 vi_minfree;
2945         __le32 vo_minfree;
2946
2947         /* Rx batch mode capability.
2948          * 1 - Rx batch mode enabled
2949          * 0 - Rx batch mode disabled
2950          */
2951         __le32 rx_batchmode;
2952
2953         /* Thermal throttling capability.
2954          * 1 - Capable of thermal throttling
2955          * 0 - Not capable of thermal throttling
2956          */
2957         __le32 tt_support;
2958
2959         /* ATF configuration.
2960          * 1  - Enable ATF
2961          * 0  - Disable ATF
2962          */
2963         __le32 atf_config;
2964
2965         /* Configure padding to manage IP header un-alignment
2966          * 1  - Enable padding
2967          * 0  - Disable padding
2968          */
2969         __le32 iphdr_pad_config;
2970
2971         /* qwrap configuration (bits 15-0)
2972          * 1  - This is qwrap configuration
2973          * 0  - This is not qwrap
2974          *
2975          * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2976          * In order to get ack-RSSI reporting and to specify the tx-rate for
2977          * individual frames, this option must be enabled.  This uses an extra
2978          * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2979          */
2980         __le32 qwrap_config;
2981 } __packed;
2982
2983 enum wmi_coex_version {
2984         WMI_NO_COEX_VERSION_SUPPORT     = 0,
2985         /* 3 wire coex support*/
2986         WMI_COEX_VERSION_1              = 1,
2987         /* 2.5 wire coex support*/
2988         WMI_COEX_VERSION_2              = 2,
2989         /* 2.5 wire coex with duty cycle support */
2990         WMI_COEX_VERSION_3              = 3,
2991         /* 4 wire coex support*/
2992         WMI_COEX_VERSION_4              = 4,
2993 };
2994
2995 /**
2996  * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2997  * @WMI_10_4_LTEU_SUPPORT: LTEU config
2998  * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
2999  * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
3000  * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
3001  * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
3002  * @WMI_10_4_PEER_STATS: Per station stats
3003  * @WMI_10_4_VDEV_STATS: Per vdev stats
3004  * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3005  * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3006  * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3007  * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3008  * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3009  *      enable/disable
3010  * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable
3011  * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3012  */
3013 enum wmi_10_4_feature_mask {
3014         WMI_10_4_LTEU_SUPPORT                   = BIT(0),
3015         WMI_10_4_COEX_GPIO_SUPPORT              = BIT(1),
3016         WMI_10_4_AUX_RADIO_SPECTRAL_INTF        = BIT(2),
3017         WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF       = BIT(3),
3018         WMI_10_4_BSS_CHANNEL_INFO_64            = BIT(4),
3019         WMI_10_4_PEER_STATS                     = BIT(5),
3020         WMI_10_4_VDEV_STATS                     = BIT(6),
3021         WMI_10_4_TDLS                           = BIT(7),
3022         WMI_10_4_TDLS_OFFCHAN                   = BIT(8),
3023         WMI_10_4_TDLS_UAPSD_BUFFER_STA          = BIT(9),
3024         WMI_10_4_TDLS_UAPSD_SLEEP_STA           = BIT(10),
3025         WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3026         WMI_10_4_TDLS_EXPLICIT_MODE_ONLY        = BIT(12),
3027         WMI_10_4_TX_DATA_ACK_RSSI               = BIT(16),
3028         WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT   = BIT(17),
3029         WMI_10_4_REPORT_AIRTIME                 = BIT(18),
3030
3031 };
3032
3033 struct wmi_ext_resource_config_10_4_cmd {
3034         /* contains enum wmi_host_platform_type */
3035         __le32 host_platform_config;
3036         /* see enum wmi_10_4_feature_mask */
3037         __le32 fw_feature_bitmap;
3038         /* WLAN priority GPIO number */
3039         __le32 wlan_gpio_priority;
3040         /* see enum wmi_coex_version */
3041         __le32 coex_version;
3042         /* COEX GPIO config */
3043         __le32 coex_gpio_pin1;
3044         __le32 coex_gpio_pin2;
3045         __le32 coex_gpio_pin3;
3046         /* number of vdevs allowed to perform tdls */
3047         __le32 num_tdls_vdevs;
3048         /* number of peers to track per TDLS vdev */
3049         __le32 num_tdls_conn_table_entries;
3050         /* number of tdls sleep sta supported */
3051         __le32 max_tdls_concurrent_sleep_sta;
3052         /* number of tdls buffer sta supported */
3053         __le32 max_tdls_concurrent_buffer_sta;
3054 };
3055
3056 /* structure describing host memory chunk. */
3057 struct host_memory_chunk {
3058         /* id of the request that is passed up in service ready */
3059         __le32 req_id;
3060         /* the physical address the memory chunk */
3061         __le32 ptr;
3062         /* size of the chunk */
3063         __le32 size;
3064 } __packed;
3065
3066 #define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8
3067
3068 struct wmi_host_mem_chunks {
3069         __le32 count;
3070         /* some fw revisions require at least 1 chunk regardless of count */
3071         struct host_memory_chunk items[1];
3072 } __packed;
3073
3074 struct wmi_init_cmd {
3075         struct wmi_resource_config resource_config;
3076         struct wmi_host_mem_chunks mem_chunks;
3077 } __packed;
3078
3079 /* _10x structure is from 10.X FW API */
3080 struct wmi_init_cmd_10x {
3081         struct wmi_resource_config_10x resource_config;
3082         struct wmi_host_mem_chunks mem_chunks;
3083 } __packed;
3084
3085 struct wmi_init_cmd_10_2 {
3086         struct wmi_resource_config_10_2 resource_config;
3087         struct wmi_host_mem_chunks mem_chunks;
3088 } __packed;
3089
3090 struct wmi_init_cmd_10_4 {
3091         struct wmi_resource_config_10_4 resource_config;
3092         struct wmi_host_mem_chunks mem_chunks;
3093 } __packed;
3094
3095 struct wmi_chan_list_entry {
3096         __le16 freq;
3097         u8 phy_mode; /* valid for 10.2 only */
3098         u8 reserved;
3099 } __packed;
3100
3101 /* TLV for channel list */
3102 struct wmi_chan_list {
3103         __le32 tag; /* WMI_CHAN_LIST_TAG */
3104         __le32 num_chan;
3105         struct wmi_chan_list_entry channel_list[];
3106 } __packed;
3107
3108 struct wmi_bssid_list {
3109         __le32 tag; /* WMI_BSSID_LIST_TAG */
3110         __le32 num_bssid;
3111         struct wmi_mac_addr bssid_list[];
3112 } __packed;
3113
3114 struct wmi_ie_data {
3115         __le32 tag; /* WMI_IE_TAG */
3116         __le32 ie_len;
3117         u8 ie_data[];
3118 } __packed;
3119
3120 struct wmi_ssid {
3121         __le32 ssid_len;
3122         u8 ssid[32];
3123 } __packed;
3124
3125 struct wmi_ssid_list {
3126         __le32 tag; /* WMI_SSID_LIST_TAG */
3127         __le32 num_ssids;
3128         struct wmi_ssid ssids[];
3129 } __packed;
3130
3131 /* prefix used by scan requestor ids on the host */
3132 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3133
3134 /* prefix used by scan request ids generated on the host */
3135 /* host cycles through the lower 12 bits to generate ids */
3136 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3137
3138 #define WLAN_SCAN_PARAMS_MAX_SSID    16
3139 #define WLAN_SCAN_PARAMS_MAX_BSSID   4
3140 #define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
3141
3142 /* Values lower than this may be refused by some firmware revisions with a scan
3143  * completion with a timedout reason.
3144  */
3145 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3146
3147 /* Scan priority numbers must be sequential, starting with 0 */
3148 enum wmi_scan_priority {
3149         WMI_SCAN_PRIORITY_VERY_LOW = 0,
3150         WMI_SCAN_PRIORITY_LOW,
3151         WMI_SCAN_PRIORITY_MEDIUM,
3152         WMI_SCAN_PRIORITY_HIGH,
3153         WMI_SCAN_PRIORITY_VERY_HIGH,
3154         WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */
3155 };
3156
3157 struct wmi_start_scan_common {
3158         /* Scan ID */
3159         __le32 scan_id;
3160         /* Scan requestor ID */
3161         __le32 scan_req_id;
3162         /* VDEV id(interface) that is requesting scan */
3163         __le32 vdev_id;
3164         /* Scan Priority, input to scan scheduler */
3165         __le32 scan_priority;
3166         /* Scan events subscription */
3167         __le32 notify_scan_events;
3168         /* dwell time in msec on active channels */
3169         __le32 dwell_time_active;
3170         /* dwell time in msec on passive channels */
3171         __le32 dwell_time_passive;
3172         /*
3173          * min time in msec on the BSS channel,only valid if atleast one
3174          * VDEV is active
3175          */
3176         __le32 min_rest_time;
3177         /*
3178          * max rest time in msec on the BSS channel,only valid if at least
3179          * one VDEV is active
3180          */
3181         /*
3182          * the scanner will rest on the bss channel at least min_rest_time
3183          * after min_rest_time the scanner will start checking for tx/rx
3184          * activity on all VDEVs. if there is no activity the scanner will
3185          * switch to off channel. if there is activity the scanner will let
3186          * the radio on the bss channel until max_rest_time expires.at
3187          * max_rest_time scanner will switch to off channel irrespective of
3188          * activity. activity is determined by the idle_time parameter.
3189          */
3190         __le32 max_rest_time;
3191         /*
3192          * time before sending next set of probe requests.
3193          * The scanner keeps repeating probe requests transmission with
3194          * period specified by repeat_probe_time.
3195          * The number of probe requests specified depends on the ssid_list
3196          * and bssid_list
3197          */
3198         __le32 repeat_probe_time;
3199         /* time in msec between 2 consequetive probe requests with in a set. */
3200         __le32 probe_spacing_time;
3201         /*
3202          * data inactivity time in msec on bss channel that will be used by
3203          * scanner for measuring the inactivity.
3204          */
3205         __le32 idle_time;
3206         /* maximum time in msec allowed for scan  */
3207         __le32 max_scan_time;
3208         /*
3209          * delay in msec before sending first probe request after switching
3210          * to a channel
3211          */
3212         __le32 probe_delay;
3213         /* Scan control flags */
3214         __le32 scan_ctrl_flags;
3215 } __packed;
3216
3217 struct wmi_start_scan_tlvs {
3218         /* TLV parameters. These includes channel list, ssid list, bssid list,
3219          * extra ies.
3220          */
3221         u8 tlvs[0];
3222 } __packed;
3223
3224 struct wmi_start_scan_cmd {
3225         struct wmi_start_scan_common common;
3226         __le32 burst_duration_ms;
3227         struct wmi_start_scan_tlvs tlvs;
3228 } __packed;
3229
3230 /* This is the definition from 10.X firmware branch */
3231 struct wmi_10x_start_scan_cmd {
3232         struct wmi_start_scan_common common;
3233         struct wmi_start_scan_tlvs tlvs;
3234 } __packed;
3235
3236 struct wmi_ssid_arg {
3237         int len;
3238         const u8 *ssid;
3239 };
3240
3241 struct wmi_bssid_arg {
3242         const u8 *bssid;
3243 };
3244
3245 struct wmi_start_scan_arg {
3246         u32 scan_id;
3247         u32 scan_req_id;
3248         u32 vdev_id;
3249         u32 scan_priority;
3250         u32 notify_scan_events;
3251         u32 dwell_time_active;
3252         u32 dwell_time_passive;
3253         u32 min_rest_time;
3254         u32 max_rest_time;
3255         u32 repeat_probe_time;
3256         u32 probe_spacing_time;
3257         u32 idle_time;
3258         u32 max_scan_time;
3259         u32 probe_delay;
3260         u32 scan_ctrl_flags;
3261         u32 burst_duration_ms;
3262
3263         u32 ie_len;
3264         u32 n_channels;
3265         u32 n_ssids;
3266         u32 n_bssids;
3267
3268         u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3269         u16 channels[64];
3270         struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3271         struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3272         struct wmi_mac_addr mac_addr;
3273         struct wmi_mac_addr mac_mask;
3274 };
3275
3276 /* scan control flags */
3277
3278 /* passively scan all channels including active channels */
3279 #define WMI_SCAN_FLAG_PASSIVE        0x1
3280 /* add wild card ssid probe request even though ssid_list is specified. */
3281 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3282 /* add cck rates to rates/xrate ie for the generated probe request */
3283 #define WMI_SCAN_ADD_CCK_RATES 0x4
3284 /* add ofdm rates to rates/xrate ie for the generated probe request */
3285 #define WMI_SCAN_ADD_OFDM_RATES 0x8
3286 /* To enable indication of Chan load and Noise floor to host */
3287 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
3288 /* Filter Probe request frames  */
3289 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
3290 /* When set, DFS channels will not be scanned */
3291 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
3292 /* Different FW scan engine may choose to bail out on errors.
3293  * Allow the driver to have influence over that.
3294  */
3295 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3296
3297 /* Use random MAC address for TA for Probe Request frame and add
3298  * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3299  * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3300  */
3301 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ   0x1000
3302
3303 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3304 #define WMI_SCAN_CLASS_MASK 0xFF000000
3305
3306 enum wmi_stop_scan_type {
3307         WMI_SCAN_STOP_ONE       = 0x00000000, /* stop by scan_id */
3308         WMI_SCAN_STOP_VDEV_ALL  = 0x01000000, /* stop by vdev_id */
3309         WMI_SCAN_STOP_ALL       = 0x04000000, /* stop all scans */
3310 };
3311
3312 struct wmi_stop_scan_cmd {
3313         __le32 scan_req_id;
3314         __le32 scan_id;
3315         __le32 req_type;
3316         __le32 vdev_id;
3317 } __packed;
3318
3319 struct wmi_stop_scan_arg {
3320         u32 req_id;
3321         enum wmi_stop_scan_type req_type;
3322         union {
3323                 u32 scan_id;
3324                 u32 vdev_id;
3325         } u;
3326 };
3327
3328 struct wmi_scan_chan_list_cmd {
3329         __le32 num_scan_chans;
3330         struct wmi_channel chan_info[];
3331 } __packed;
3332
3333 struct wmi_scan_chan_list_arg {
3334         u32 n_channels;
3335         struct wmi_channel_arg *channels;
3336 };
3337
3338 enum wmi_bss_filter {
3339         WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */
3340         WMI_BSS_FILTER_ALL,             /* all beacons forwarded */
3341         WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */
3342         WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3343         WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */
3344         WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */
3345         WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */
3346         WMI_BSS_FILTER_LAST_BSS,        /* marker only */
3347 };
3348
3349 enum wmi_scan_event_type {
3350         WMI_SCAN_EVENT_STARTED              = BIT(0),
3351         WMI_SCAN_EVENT_COMPLETED            = BIT(1),
3352         WMI_SCAN_EVENT_BSS_CHANNEL          = BIT(2),
3353         WMI_SCAN_EVENT_FOREIGN_CHANNEL      = BIT(3),
3354         WMI_SCAN_EVENT_DEQUEUED             = BIT(4),
3355         /* possibly by high-prio scan */
3356         WMI_SCAN_EVENT_PREEMPTED            = BIT(5),
3357         WMI_SCAN_EVENT_START_FAILED         = BIT(6),
3358         WMI_SCAN_EVENT_RESTARTED            = BIT(7),
3359         WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3360         WMI_SCAN_EVENT_MAX                  = BIT(15),
3361 };
3362
3363 enum wmi_scan_completion_reason {
3364         WMI_SCAN_REASON_COMPLETED,
3365         WMI_SCAN_REASON_CANCELLED,
3366         WMI_SCAN_REASON_PREEMPTED,
3367         WMI_SCAN_REASON_TIMEDOUT,
3368         WMI_SCAN_REASON_INTERNAL_FAILURE,
3369         WMI_SCAN_REASON_MAX,
3370 };
3371
3372 struct wmi_scan_event {
3373         __le32 event_type; /* %WMI_SCAN_EVENT_ */
3374         __le32 reason; /* %WMI_SCAN_REASON_ */
3375         __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3376         __le32 scan_req_id;
3377         __le32 scan_id;
3378         __le32 vdev_id;
3379 } __packed;
3380
3381 /*
3382  * This defines how much headroom is kept in the
3383  * receive frame between the descriptor and the
3384  * payload, in order for the WMI PHY error and
3385  * management handler to insert header contents.
3386  *
3387  * This is in bytes.
3388  */
3389 #define WMI_MGMT_RX_HDR_HEADROOM    52
3390
3391 /*
3392  * This event will be used for sending scan results
3393  * as well as rx mgmt frames to the host. The rx buffer
3394  * will be sent as part of this WMI event. It would be a
3395  * good idea to pass all the fields in the RX status
3396  * descriptor up to the host.
3397  */
3398 struct wmi_mgmt_rx_hdr_v1 {
3399         __le32 channel;
3400         __le32 snr;
3401         __le32 rate;
3402         __le32 phy_mode;
3403         __le32 buf_len;
3404         __le32 status; /* %WMI_RX_STATUS_ */
3405 } __packed;
3406
3407 struct wmi_mgmt_rx_hdr_v2 {
3408         struct wmi_mgmt_rx_hdr_v1 v1;
3409         __le32 rssi_ctl[4];
3410 } __packed;
3411
3412 struct wmi_mgmt_rx_event_v1 {
3413         struct wmi_mgmt_rx_hdr_v1 hdr;
3414         u8 buf[];
3415 } __packed;
3416
3417 struct wmi_mgmt_rx_event_v2 {
3418         struct wmi_mgmt_rx_hdr_v2 hdr;
3419         u8 buf[];
3420 } __packed;
3421
3422 struct wmi_10_4_mgmt_rx_hdr {
3423         __le32 channel;
3424         __le32 snr;
3425             u8 rssi_ctl[4];
3426         __le32 rate;
3427         __le32 phy_mode;
3428         __le32 buf_len;
3429         __le32 status;
3430 } __packed;
3431
3432 struct wmi_10_4_mgmt_rx_event {
3433         struct wmi_10_4_mgmt_rx_hdr hdr;
3434         u8 buf[];
3435 } __packed;
3436
3437 struct wmi_mgmt_rx_ext_info {
3438         __le64 rx_mac_timestamp;
3439 } __packed __aligned(4);
3440
3441 #define WMI_RX_STATUS_OK                        0x00
3442 #define WMI_RX_STATUS_ERR_CRC                   0x01
3443 #define WMI_RX_STATUS_ERR_DECRYPT               0x08
3444 #define WMI_RX_STATUS_ERR_MIC                   0x10
3445 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS        0x20
3446 /* Extension data at the end of mgmt frame */
3447 #define WMI_RX_STATUS_EXT_INFO          0x40
3448
3449 #define PHY_ERROR_GEN_SPECTRAL_SCAN             0x26
3450 #define PHY_ERROR_GEN_FALSE_RADAR_EXT           0x24
3451 #define PHY_ERROR_GEN_RADAR                     0x05
3452
3453 #define PHY_ERROR_10_4_RADAR_MASK               0x4
3454 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK       0x4000000
3455
3456 enum phy_err_type {
3457         PHY_ERROR_UNKNOWN,
3458         PHY_ERROR_SPECTRAL_SCAN,
3459         PHY_ERROR_FALSE_RADAR_EXT,
3460         PHY_ERROR_RADAR
3461 };
3462
3463 struct wmi_phyerr {
3464         __le32 tsf_timestamp;
3465         __le16 freq1;
3466         __le16 freq2;
3467         u8 rssi_combined;
3468         u8 chan_width_mhz;
3469         u8 phy_err_code;
3470         u8 rsvd0;
3471         __le32 rssi_chains[4];
3472         __le16 nf_chains[4];
3473         __le32 buf_len;
3474         u8 buf[];
3475 } __packed;
3476
3477 struct wmi_phyerr_event {
3478         __le32 num_phyerrs;
3479         __le32 tsf_l32;
3480         __le32 tsf_u32;
3481
3482         /* array of struct wmi_phyerr */
3483         u8 phyerrs[];
3484 } __packed;
3485
3486 struct wmi_10_4_phyerr_event {
3487         __le32 tsf_l32;
3488         __le32 tsf_u32;
3489         __le16 freq1;
3490         __le16 freq2;
3491         u8 rssi_combined;
3492         u8 chan_width_mhz;
3493         u8 phy_err_code;
3494         u8 rsvd0;
3495         __le32 rssi_chains[4];
3496         __le16 nf_chains[4];
3497         __le32 phy_err_mask[2];
3498         __le32 tsf_timestamp;
3499         __le32 buf_len;
3500         u8 buf[];
3501 } __packed;
3502
3503 struct wmi_radar_found_info {
3504         __le32 pri_min;
3505         __le32 pri_max;
3506         __le32 width_min;
3507         __le32 width_max;
3508         __le32 sidx_min;
3509         __le32 sidx_max;
3510 } __packed;
3511
3512 enum wmi_radar_confirmation_status {
3513         /* Detected radar was due to SW pulses */
3514         WMI_SW_RADAR_DETECTED    = 0,
3515
3516         WMI_RADAR_DETECTION_FAIL = 1,
3517
3518         /* Real radar detected */
3519         WMI_HW_RADAR_DETECTED    = 2,
3520 };
3521
3522 #define PHYERR_TLV_SIG                          0xBB
3523 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT        0xFB
3524 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY      0xF8
3525 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT  0xF9
3526
3527 struct phyerr_radar_report {
3528         __le32 reg0; /* RADAR_REPORT_REG0_* */
3529         __le32 reg1; /* RADAR_REPORT_REG1_* */
3530 } __packed;
3531
3532 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK           0x80000000
3533 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB            31
3534
3535 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK       0x40000000
3536 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB        30
3537
3538 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK           0x3FF00000
3539 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB            20
3540
3541 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK         0x000F0000
3542 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB          16
3543
3544 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK         0x0000FC00
3545 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB          10
3546
3547 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK               0x000003FF
3548 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB                0
3549
3550 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK     0x80000000
3551 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB      31
3552
3553 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK        0x7F000000
3554 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB         24
3555
3556 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK       0x00FF0000
3557 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB        16
3558
3559 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK         0x0000FF00
3560 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB          8
3561
3562 #define RADAR_REPORT_REG1_PULSE_DUR_MASK                0x000000FF
3563 #define RADAR_REPORT_REG1_PULSE_DUR_LSB                 0
3564
3565 struct phyerr_fft_report {
3566         __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3567         __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3568 } __packed;
3569
3570 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK       0xFF800000
3571 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB        23
3572
3573 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK         0x007FC000
3574 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB          14
3575
3576 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK         0x00003000
3577 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB          12
3578
3579 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK           0x00000FFF
3580 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB            0
3581
3582 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK           0xFC000000
3583 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB            26
3584
3585 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK           0x03FC0000
3586 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB            18
3587
3588 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK            0x0003FF00
3589 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB             8
3590
3591 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK     0x000000FF
3592 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB      0
3593
3594 struct phyerr_tlv {
3595         __le16 len;
3596         u8 tag;
3597         u8 sig;
3598 } __packed;
3599
3600 #define DFS_RSSI_POSSIBLY_FALSE                 50
3601 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE       40
3602
3603 struct wmi_mgmt_tx_hdr {
3604         __le32 vdev_id;
3605         struct wmi_mac_addr peer_macaddr;
3606         __le32 tx_rate;
3607         __le32 tx_power;
3608         __le32 buf_len;
3609 } __packed;
3610
3611 struct wmi_mgmt_tx_cmd {
3612         struct wmi_mgmt_tx_hdr hdr;
3613         u8 buf[];
3614 } __packed;
3615
3616 struct wmi_echo_event {
3617         __le32 value;
3618 } __packed;
3619
3620 struct wmi_echo_cmd {
3621         __le32 value;
3622 } __packed;
3623
3624 struct wmi_pdev_set_regdomain_cmd {
3625         __le32 reg_domain;
3626         __le32 reg_domain_2G;
3627         __le32 reg_domain_5G;
3628         __le32 conformance_test_limit_2G;
3629         __le32 conformance_test_limit_5G;
3630 } __packed;
3631
3632 enum wmi_dfs_region {
3633         /* Uninitialized dfs domain */
3634         WMI_UNINIT_DFS_DOMAIN = 0,
3635
3636         /* FCC3 dfs domain */
3637         WMI_FCC_DFS_DOMAIN = 1,
3638
3639         /* ETSI dfs domain */
3640         WMI_ETSI_DFS_DOMAIN = 2,
3641
3642         /*Japan dfs domain */
3643         WMI_MKK4_DFS_DOMAIN = 3,
3644 };
3645
3646 struct wmi_pdev_set_regdomain_cmd_10x {
3647         __le32 reg_domain;
3648         __le32 reg_domain_2G;
3649         __le32 reg_domain_5G;
3650         __le32 conformance_test_limit_2G;
3651         __le32 conformance_test_limit_5G;
3652
3653         /* dfs domain from wmi_dfs_region */
3654         __le32 dfs_domain;
3655 } __packed;
3656
3657 /* Command to set/unset chip in quiet mode */
3658 struct wmi_pdev_set_quiet_cmd {
3659         /* period in TUs */
3660         __le32 period;
3661
3662         /* duration in TUs */
3663         __le32 duration;
3664
3665         /* offset in TUs */
3666         __le32 next_start;
3667
3668         /* enable/disable */
3669         __le32 enabled;
3670 } __packed;
3671
3672 /*
3673  * 802.11g protection mode.
3674  */
3675 enum ath10k_protmode {
3676         ATH10K_PROT_NONE     = 0,    /* no protection */
3677         ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */
3678         ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */
3679 };
3680
3681 enum wmi_rtscts_profile {
3682         WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3683         WMI_RTSCTS_FOR_SECOND_RATESERIES,
3684         WMI_RTSCTS_ACROSS_SW_RETRIES
3685 };
3686
3687 #define WMI_RTSCTS_ENABLED              1
3688 #define WMI_RTSCTS_SET_MASK             0x0f
3689 #define WMI_RTSCTS_SET_LSB              0
3690
3691 #define WMI_RTSCTS_PROFILE_MASK         0xf0
3692 #define WMI_RTSCTS_PROFILE_LSB          4
3693
3694 enum wmi_beacon_gen_mode {
3695         WMI_BEACON_STAGGERED_MODE = 0,
3696         WMI_BEACON_BURST_MODE = 1
3697 };
3698
3699 enum wmi_csa_event_ies_present_flag {
3700         WMI_CSA_IE_PRESENT = 0x00000001,
3701         WMI_XCSA_IE_PRESENT = 0x00000002,
3702         WMI_WBW_IE_PRESENT = 0x00000004,
3703         WMI_CSWARP_IE_PRESENT = 0x00000008,
3704 };
3705
3706 /* wmi CSA receive event from beacon frame */
3707 struct wmi_csa_event {
3708         __le32 i_fc_dur;
3709         /* Bit 0-15: FC */
3710         /* Bit 16-31: DUR */
3711         struct wmi_mac_addr i_addr1;
3712         struct wmi_mac_addr i_addr2;
3713         __le32 csa_ie[2];
3714         __le32 xcsa_ie[2];
3715         __le32 wb_ie[2];
3716         __le32 cswarp_ie;
3717         __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3718 } __packed;
3719
3720 /* the definition of different PDEV parameters */
3721 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3722 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3723 #define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
3724
3725 struct wmi_pdev_param_map {
3726         u32 tx_chain_mask;
3727         u32 rx_chain_mask;
3728         u32 txpower_limit2g;
3729         u32 txpower_limit5g;
3730         u32 txpower_scale;
3731         u32 beacon_gen_mode;
3732         u32 beacon_tx_mode;
3733         u32 resmgr_offchan_mode;
3734         u32 protection_mode;
3735         u32 dynamic_bw;
3736         u32 non_agg_sw_retry_th;
3737         u32 agg_sw_retry_th;
3738         u32 sta_kickout_th;
3739         u32 ac_aggrsize_scaling;
3740         u32 ltr_enable;
3741         u32 ltr_ac_latency_be;
3742         u32 ltr_ac_latency_bk;
3743         u32 ltr_ac_latency_vi;
3744         u32 ltr_ac_latency_vo;
3745         u32 ltr_ac_latency_timeout;
3746         u32 ltr_sleep_override;
3747         u32 ltr_rx_override;
3748         u32 ltr_tx_activity_timeout;
3749         u32 l1ss_enable;
3750         u32 dsleep_enable;
3751         u32 pcielp_txbuf_flush;
3752         u32 pcielp_txbuf_watermark;
3753         u32 pcielp_txbuf_tmo_en;
3754         u32 pcielp_txbuf_tmo_value;
3755         u32 pdev_stats_update_period;
3756         u32 vdev_stats_update_period;
3757         u32 peer_stats_update_period;
3758         u32 bcnflt_stats_update_period;
3759         u32 pmf_qos;
3760         u32 arp_ac_override;
3761         u32 dcs;
3762         u32 ani_enable;
3763         u32 ani_poll_period;
3764         u32 ani_listen_period;
3765         u32 ani_ofdm_level;
3766         u32 ani_cck_level;
3767         u32 dyntxchain;
3768         u32 proxy_sta;
3769         u32 idle_ps_config;
3770         u32 power_gating_sleep;
3771         u32 fast_channel_reset;
3772         u32 burst_dur;
3773         u32 burst_enable;
3774         u32 cal_period;
3775         u32 aggr_burst;
3776         u32 rx_decap_mode;
3777         u32 smart_antenna_default_antenna;
3778         u32 igmpmld_override;
3779         u32 igmpmld_tid;
3780         u32 antenna_gain;
3781         u32 rx_filter;
3782         u32 set_mcast_to_ucast_tid;
3783         u32 proxy_sta_mode;
3784         u32 set_mcast2ucast_mode;
3785         u32 set_mcast2ucast_buffer;
3786         u32 remove_mcast2ucast_buffer;
3787         u32 peer_sta_ps_statechg_enable;
3788         u32 igmpmld_ac_override;
3789         u32 block_interbss;
3790         u32 set_disable_reset_cmdid;
3791         u32 set_msdu_ttl_cmdid;
3792         u32 set_ppdu_duration_cmdid;
3793         u32 txbf_sound_period_cmdid;
3794         u32 set_promisc_mode_cmdid;
3795         u32 set_burst_mode_cmdid;
3796         u32 en_stats;
3797         u32 mu_group_policy;
3798         u32 noise_detection;
3799         u32 noise_threshold;
3800         u32 dpd_enable;
3801         u32 set_mcast_bcast_echo;
3802         u32 atf_strict_sch;
3803         u32 atf_sched_duration;
3804         u32 ant_plzn;
3805         u32 mgmt_retry_limit;
3806         u32 sensitivity_level;
3807         u32 signed_txpower_2g;
3808         u32 signed_txpower_5g;
3809         u32 enable_per_tid_amsdu;
3810         u32 enable_per_tid_ampdu;
3811         u32 cca_threshold;
3812         u32 rts_fixed_rate;
3813         u32 pdev_reset;
3814         u32 wapi_mbssid_offset;
3815         u32 arp_srcaddr;
3816         u32 arp_dstaddr;
3817         u32 enable_btcoex;
3818         u32 rfkill_config;
3819         u32 rfkill_enable;
3820         u32 peer_stats_info_enable;
3821 };
3822
3823 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3824
3825 enum wmi_pdev_param {
3826         /* TX chain mask */
3827         WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3828         /* RX chain mask */
3829         WMI_PDEV_PARAM_RX_CHAIN_MASK,
3830         /* TX power limit for 2G Radio */
3831         WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3832         /* TX power limit for 5G Radio */
3833         WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3834         /* TX power scale */
3835         WMI_PDEV_PARAM_TXPOWER_SCALE,
3836         /* Beacon generation mode . 0: host, 1: target   */
3837         WMI_PDEV_PARAM_BEACON_GEN_MODE,
3838         /* Beacon generation mode . 0: staggered 1: bursted   */
3839         WMI_PDEV_PARAM_BEACON_TX_MODE,
3840         /*
3841          * Resource manager off chan mode .
3842          * 0: turn off offchan mode. 1: turn on offchan mode
3843          */
3844         WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3845         /*
3846          * Protection mode:
3847          * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3848          */
3849         WMI_PDEV_PARAM_PROTECTION_MODE,
3850         /*
3851          * Dynamic bandwidth - 0: disable, 1: enable
3852          *
3853          * When enabled HW rate control tries different bandwidths when
3854          * retransmitting frames.
3855          */
3856         WMI_PDEV_PARAM_DYNAMIC_BW,
3857         /* Non aggregrate/ 11g sw retry threshold.0-disable */
3858         WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3859         /* aggregrate sw retry threshold. 0-disable*/
3860         WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3861         /* Station kickout threshold (non of consecutive failures).0-disable */
3862         WMI_PDEV_PARAM_STA_KICKOUT_TH,
3863         /* Aggerate size scaling configuration per AC */
3864         WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3865         /* LTR enable */
3866         WMI_PDEV_PARAM_LTR_ENABLE,
3867         /* LTR latency for BE, in us */
3868         WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3869         /* LTR latency for BK, in us */
3870         WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3871         /* LTR latency for VI, in us */
3872         WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3873         /* LTR latency for VO, in us  */
3874         WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3875         /* LTR AC latency timeout, in ms */
3876         WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3877         /* LTR platform latency override, in us */
3878         WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3879         /* LTR-RX override, in us */
3880         WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3881         /* Tx activity timeout for LTR, in us */
3882         WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3883         /* L1SS state machine enable */
3884         WMI_PDEV_PARAM_L1SS_ENABLE,
3885         /* Deep sleep state machine enable */
3886         WMI_PDEV_PARAM_DSLEEP_ENABLE,
3887         /* RX buffering flush enable */
3888         WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3889         /* RX buffering matermark */
3890         WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3891         /* RX buffering timeout enable */
3892         WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3893         /* RX buffering timeout value */
3894         WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3895         /* pdev level stats update period in ms */
3896         WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3897         /* vdev level stats update period in ms */
3898         WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3899         /* peer level stats update period in ms */
3900         WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3901         /* beacon filter status update period */
3902         WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3903         /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3904         WMI_PDEV_PARAM_PMF_QOS,
3905         /* Access category on which ARP frames are sent */
3906         WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3907         /* DCS configuration */
3908         WMI_PDEV_PARAM_DCS,
3909         /* Enable/Disable ANI on target */
3910         WMI_PDEV_PARAM_ANI_ENABLE,
3911         /* configure the ANI polling period */
3912         WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3913         /* configure the ANI listening period */
3914         WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3915         /* configure OFDM immunity level */
3916         WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3917         /* configure CCK immunity level */
3918         WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3919         /* Enable/Disable CDD for 1x1 STAs in rate control module */
3920         WMI_PDEV_PARAM_DYNTXCHAIN,
3921         /* Enable/Disable proxy STA */
3922         WMI_PDEV_PARAM_PROXY_STA,
3923         /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3924         WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3925         /* Enable/Disable power gating sleep */
3926         WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3927 };
3928
3929 enum wmi_10x_pdev_param {
3930         /* TX chian mask */
3931         WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3932         /* RX chian mask */
3933         WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3934         /* TX power limit for 2G Radio */
3935         WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3936         /* TX power limit for 5G Radio */
3937         WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3938         /* TX power scale */
3939         WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3940         /* Beacon generation mode . 0: host, 1: target   */
3941         WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3942         /* Beacon generation mode . 0: staggered 1: bursted   */
3943         WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3944         /*
3945          * Resource manager off chan mode .
3946          * 0: turn off offchan mode. 1: turn on offchan mode
3947          */
3948         WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3949         /*
3950          * Protection mode:
3951          * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3952          */
3953         WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3954         /* Dynamic bandwidth 0: disable 1: enable */
3955         WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3956         /* Non aggregrate/ 11g sw retry threshold.0-disable */
3957         WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3958         /* aggregrate sw retry threshold. 0-disable*/
3959         WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3960         /* Station kickout threshold (non of consecutive failures).0-disable */
3961         WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3962         /* Aggerate size scaling configuration per AC */
3963         WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3964         /* LTR enable */
3965         WMI_10X_PDEV_PARAM_LTR_ENABLE,
3966         /* LTR latency for BE, in us */
3967         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3968         /* LTR latency for BK, in us */
3969         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3970         /* LTR latency for VI, in us */
3971         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3972         /* LTR latency for VO, in us  */
3973         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3974         /* LTR AC latency timeout, in ms */
3975         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3976         /* LTR platform latency override, in us */
3977         WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3978         /* LTR-RX override, in us */
3979         WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3980         /* Tx activity timeout for LTR, in us */
3981         WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3982         /* L1SS state machine enable */
3983         WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3984         /* Deep sleep state machine enable */
3985         WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3986         /* pdev level stats update period in ms */
3987         WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3988         /* vdev level stats update period in ms */
3989         WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3990         /* peer level stats update period in ms */
3991         WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3992         /* beacon filter status update period */
3993         WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3994         /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3995         WMI_10X_PDEV_PARAM_PMF_QOS,
3996         /* Access category on which ARP and DHCP frames are sent */
3997         WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3998         /* DCS configuration */
3999         WMI_10X_PDEV_PARAM_DCS,
4000         /* Enable/Disable ANI on target */
4001         WMI_10X_PDEV_PARAM_ANI_ENABLE,
4002         /* configure the ANI polling period */
4003         WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
4004         /* configure the ANI listening period */
4005         WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
4006         /* configure OFDM immunity level */
4007         WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4008         /* configure CCK immunity level */
4009         WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4010         /* Enable/Disable CDD for 1x1 STAs in rate control module */
4011         WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4012         /* Enable/Disable Fast channel reset*/
4013         WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4014         /* Set Bursting DUR */
4015         WMI_10X_PDEV_PARAM_BURST_DUR,
4016         /* Set Bursting Enable*/
4017         WMI_10X_PDEV_PARAM_BURST_ENABLE,
4018
4019         /* following are available as of firmware 10.2 */
4020         WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4021         WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4022         WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4023         WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4024         WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4025         WMI_10X_PDEV_PARAM_RX_FILTER,
4026         WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4027         WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4028         WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4029         WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4030         WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4031         WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4032         WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4033         WMI_10X_PDEV_PARAM_CAL_PERIOD,
4034         WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4035         WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4036         WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4037         WMI_10X_PDEV_PARAM_PDEV_RESET
4038 };
4039
4040 enum wmi_10_4_pdev_param {
4041         WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4042         WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4043         WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4044         WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4045         WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4046         WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4047         WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4048         WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4049         WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4050         WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4051         WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4052         WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4053         WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4054         WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4055         WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4056         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4057         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4058         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4059         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4060         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4061         WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4062         WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4063         WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4064         WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4065         WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4066         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4067         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4068         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4069         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4070         WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4071         WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4072         WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4073         WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4074         WMI_10_4_PDEV_PARAM_PMF_QOS,
4075         WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4076         WMI_10_4_PDEV_PARAM_DCS,
4077         WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4078         WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4079         WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4080         WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4081         WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4082         WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4083         WMI_10_4_PDEV_PARAM_PROXY_STA,
4084         WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4085         WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4086         WMI_10_4_PDEV_PARAM_AGGR_BURST,
4087         WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4088         WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4089         WMI_10_4_PDEV_PARAM_BURST_DUR,
4090         WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4091         WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4092         WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4093         WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4094         WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4095         WMI_10_4_PDEV_PARAM_RX_FILTER,
4096         WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4097         WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4098         WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4099         WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4100         WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4101         WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4102         WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4103         WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4104         WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4105         WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4106         WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4107         WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4108         WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4109         WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4110         WMI_10_4_PDEV_PARAM_EN_STATS,
4111         WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4112         WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4113         WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4114         WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4115         WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4116         WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4117         WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4118         WMI_10_4_PDEV_PARAM_ANT_PLZN,
4119         WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4120         WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4121         WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4122         WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4123         WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4124         WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4125         WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4126         WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4127         WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4128         WMI_10_4_PDEV_PARAM_PDEV_RESET,
4129         WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4130         WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4131         WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4132         WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4133         WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4134         WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4135         WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4136         WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4137         WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4138         WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4139         WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4140         WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4141 };
4142
4143 struct wmi_pdev_set_param_cmd {
4144         __le32 param_id;
4145         __le32 param_value;
4146 } __packed;
4147
4148 struct wmi_pdev_set_base_macaddr_cmd {
4149         struct wmi_mac_addr mac_addr;
4150 } __packed;
4151
4152 /* valid period is 1 ~ 60000ms, unit in millisecond */
4153 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4154
4155 struct wmi_pdev_get_tpc_config_cmd {
4156         /* parameter   */
4157         __le32 param;
4158 } __packed;
4159
4160 #define WMI_TPC_CONFIG_PARAM            1
4161 #define WMI_TPC_FINAL_RATE_MAX          240
4162 #define WMI_TPC_TX_N_CHAIN              4
4163 #define WMI_TPC_RATE_MAX               (WMI_TPC_TX_N_CHAIN * 65)
4164 #define WMI_TPC_PREAM_TABLE_MAX         10
4165 #define WMI_TPC_FLAG                    3
4166 #define WMI_TPC_BUF_SIZE                10
4167 #define WMI_TPC_BEAMFORMING             2
4168
4169 enum wmi_tpc_table_type {
4170         WMI_TPC_TABLE_TYPE_CDD = 0,
4171         WMI_TPC_TABLE_TYPE_STBC = 1,
4172         WMI_TPC_TABLE_TYPE_TXBF = 2,
4173 };
4174
4175 enum wmi_tpc_config_event_flag {
4176         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD     = 0x1,
4177         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC    = 0x2,
4178         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF    = 0x4,
4179 };
4180
4181 struct wmi_pdev_tpc_config_event {
4182         __le32 reg_domain;
4183         __le32 chan_freq;
4184         __le32 phy_mode;
4185         __le32 twice_antenna_reduction;
4186         __le32 twice_max_rd_power;
4187         a_sle32 twice_antenna_gain;
4188         __le32 power_limit;
4189         __le32 rate_max;
4190         __le32 num_tx_chain;
4191         __le32 ctl;
4192         __le32 flags;
4193         s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4194         s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4195         s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4196         s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4197         u8 rates_array[WMI_TPC_RATE_MAX];
4198 } __packed;
4199
4200 /* Transmit power scale factor. */
4201 enum wmi_tp_scale {
4202         WMI_TP_SCALE_MAX    = 0,        /* no scaling (default) */
4203         WMI_TP_SCALE_50     = 1,        /* 50% of max (-3 dBm) */
4204         WMI_TP_SCALE_25     = 2,        /* 25% of max (-6 dBm) */
4205         WMI_TP_SCALE_12     = 3,        /* 12% of max (-9 dBm) */
4206         WMI_TP_SCALE_MIN    = 4,        /* min, but still on   */
4207         WMI_TP_SCALE_SIZE   = 5,        /* max num of enum     */
4208 };
4209
4210 struct wmi_pdev_tpc_final_table_event {
4211         __le32 reg_domain;
4212         __le32 chan_freq;
4213         __le32 phy_mode;
4214         __le32 twice_antenna_reduction;
4215         __le32 twice_max_rd_power;
4216         a_sle32 twice_antenna_gain;
4217         __le32 power_limit;
4218         __le32 rate_max;
4219         __le32 num_tx_chain;
4220         __le32 ctl;
4221         __le32 flags;
4222         s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4223         s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4224         s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4225         s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4226         u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4227         u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4228            [WMI_TPC_TX_N_CHAIN];
4229 } __packed;
4230
4231 struct wmi_pdev_get_tpc_table_cmd {
4232         __le32 param;
4233 } __packed;
4234
4235 enum wmi_tpc_pream_2ghz {
4236         WMI_TPC_PREAM_2GHZ_CCK = 0,
4237         WMI_TPC_PREAM_2GHZ_OFDM,
4238         WMI_TPC_PREAM_2GHZ_HT20,
4239         WMI_TPC_PREAM_2GHZ_HT40,
4240         WMI_TPC_PREAM_2GHZ_VHT20,
4241         WMI_TPC_PREAM_2GHZ_VHT40,
4242         WMI_TPC_PREAM_2GHZ_VHT80,
4243 };
4244
4245 enum wmi_tpc_pream_5ghz {
4246         WMI_TPC_PREAM_5GHZ_OFDM = 1,
4247         WMI_TPC_PREAM_5GHZ_HT20,
4248         WMI_TPC_PREAM_5GHZ_HT40,
4249         WMI_TPC_PREAM_5GHZ_VHT20,
4250         WMI_TPC_PREAM_5GHZ_VHT40,
4251         WMI_TPC_PREAM_5GHZ_VHT80,
4252         WMI_TPC_PREAM_5GHZ_HTCUP,
4253 };
4254
4255 #define WMI_PEER_PS_STATE_DISABLED      2
4256
4257 struct wmi_peer_sta_ps_state_chg_event {
4258         struct wmi_mac_addr peer_macaddr;
4259         __le32 peer_ps_state;
4260 } __packed;
4261
4262 struct wmi_pdev_chanlist_update_event {
4263         /* number of channels */
4264         __le32 num_chan;
4265         /* array of channels */
4266         struct wmi_channel channel_list[1];
4267 } __packed;
4268
4269 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4270
4271 struct wmi_debug_mesg_event {
4272         /* message buffer, NULL terminated */
4273         char bufp[WMI_MAX_DEBUG_MESG];
4274 } __packed;
4275
4276 enum {
4277         /* P2P device */
4278         VDEV_SUBTYPE_P2PDEV = 0,
4279         /* P2P client */
4280         VDEV_SUBTYPE_P2PCLI,
4281         /* P2P GO */
4282         VDEV_SUBTYPE_P2PGO,
4283         /* BT3.0 HS */
4284         VDEV_SUBTYPE_BT,
4285 };
4286
4287 struct wmi_pdev_set_channel_cmd {
4288         /* idnore power , only use flags , mode and freq */
4289         struct wmi_channel chan;
4290 } __packed;
4291
4292 struct wmi_pdev_pktlog_enable_cmd {
4293         __le32 ev_bitmap;
4294 } __packed;
4295
4296 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4297 #define WMI_DSCP_MAP_MAX    (64)
4298 struct wmi_pdev_set_dscp_tid_map_cmd {
4299         /* map indicating DSCP to TID conversion */
4300         __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4301 } __packed;
4302
4303 enum mcast_bcast_rate_id {
4304         WMI_SET_MCAST_RATE,
4305         WMI_SET_BCAST_RATE
4306 };
4307
4308 struct mcast_bcast_rate {
4309         enum mcast_bcast_rate_id rate_id;
4310         __le32 rate;
4311 } __packed;
4312
4313 struct wmi_wmm_params {
4314         __le32 cwmin;
4315         __le32 cwmax;
4316         __le32 aifs;
4317         __le32 txop;
4318         __le32 acm;
4319         __le32 no_ack;
4320 } __packed;
4321
4322 struct wmi_pdev_set_wmm_params {
4323         struct wmi_wmm_params ac_be;
4324         struct wmi_wmm_params ac_bk;
4325         struct wmi_wmm_params ac_vi;
4326         struct wmi_wmm_params ac_vo;
4327 } __packed;
4328
4329 struct wmi_wmm_params_arg {
4330         u32 cwmin;
4331         u32 cwmax;
4332         u32 aifs;
4333         u32 txop;
4334         u32 acm;
4335         u32 no_ack;
4336 };
4337
4338 struct wmi_wmm_params_all_arg {
4339         struct wmi_wmm_params_arg ac_be;
4340         struct wmi_wmm_params_arg ac_bk;
4341         struct wmi_wmm_params_arg ac_vi;
4342         struct wmi_wmm_params_arg ac_vo;
4343 };
4344
4345 struct wmi_pdev_stats_tx {
4346         /* Num HTT cookies queued to dispatch list */
4347         __le32 comp_queued;
4348
4349         /* Num HTT cookies dispatched */
4350         __le32 comp_delivered;
4351
4352         /* Num MSDU queued to WAL */
4353         __le32 msdu_enqued;
4354
4355         /* Num MPDU queue to WAL */
4356         __le32 mpdu_enqued;
4357
4358         /* Num MSDUs dropped by WMM limit */
4359         __le32 wmm_drop;
4360
4361         /* Num Local frames queued */
4362         __le32 local_enqued;
4363
4364         /* Num Local frames done */
4365         __le32 local_freed;
4366
4367         /* Num queued to HW */
4368         __le32 hw_queued;
4369
4370         /* Num PPDU reaped from HW */
4371         __le32 hw_reaped;
4372
4373         /* Num underruns */
4374         __le32 underrun;
4375
4376         /* Num PPDUs cleaned up in TX abort */
4377         __le32 tx_abort;
4378
4379         /* Num MPDUs requeued by SW */
4380         __le32 mpdus_requeued;
4381
4382         /* excessive retries */
4383         __le32 tx_ko;
4384
4385         /* data hw rate code */
4386         __le32 data_rc;
4387
4388         /* Scheduler self triggers */
4389         __le32 self_triggers;
4390
4391         /* frames dropped due to excessive sw retries */
4392         __le32 sw_retry_failure;
4393
4394         /* illegal rate phy errors  */
4395         __le32 illgl_rate_phy_err;
4396
4397         /* wal pdev continuous xretry */
4398         __le32 pdev_cont_xretry;
4399
4400         /* wal pdev continous xretry */
4401         __le32 pdev_tx_timeout;
4402
4403         /* wal pdev resets  */
4404         __le32 pdev_resets;
4405
4406         /* frames dropped due to non-availability of stateless TIDs */
4407         __le32 stateless_tid_alloc_failure;
4408
4409         __le32 phy_underrun;
4410
4411         /* MPDU is more than txop limit */
4412         __le32 txop_ovf;
4413 } __packed;
4414
4415 struct wmi_10_4_pdev_stats_tx {
4416         /* Num HTT cookies queued to dispatch list */
4417         __le32 comp_queued;
4418
4419         /* Num HTT cookies dispatched */
4420         __le32 comp_delivered;
4421
4422         /* Num MSDU queued to WAL */
4423         __le32 msdu_enqued;
4424
4425         /* Num MPDU queue to WAL */
4426         __le32 mpdu_enqued;
4427
4428         /* Num MSDUs dropped by WMM limit */
4429         __le32 wmm_drop;
4430
4431         /* Num Local frames queued */
4432         __le32 local_enqued;
4433
4434         /* Num Local frames done */
4435         __le32 local_freed;
4436
4437         /* Num queued to HW */
4438         __le32 hw_queued;
4439
4440         /* Num PPDU reaped from HW */
4441         __le32 hw_reaped;
4442
4443         /* Num underruns */
4444         __le32 underrun;
4445
4446         /* HW Paused. */
4447         __le32  hw_paused;
4448
4449         /* Num PPDUs cleaned up in TX abort */
4450         __le32 tx_abort;
4451
4452         /* Num MPDUs requeued by SW */
4453         __le32 mpdus_requeued;
4454
4455         /* excessive retries */
4456         __le32 tx_ko;
4457
4458         /* data hw rate code */
4459         __le32 data_rc;
4460
4461         /* Scheduler self triggers */
4462         __le32 self_triggers;
4463
4464         /* frames dropped due to excessive sw retries */
4465         __le32 sw_retry_failure;
4466
4467         /* illegal rate phy errors  */
4468         __le32 illgl_rate_phy_err;
4469
4470         /* wal pdev continuous xretry */
4471         __le32 pdev_cont_xretry;
4472
4473         /* wal pdev tx timeouts */
4474         __le32 pdev_tx_timeout;
4475
4476         /* wal pdev resets  */
4477         __le32 pdev_resets;
4478
4479         /* frames dropped due to non-availability of stateless TIDs */
4480         __le32 stateless_tid_alloc_failure;
4481
4482         __le32 phy_underrun;
4483
4484         /* MPDU is more than txop limit */
4485         __le32 txop_ovf;
4486
4487         /* Number of Sequences posted */
4488         __le32 seq_posted;
4489
4490         /* Number of Sequences failed queueing */
4491         __le32 seq_failed_queueing;
4492
4493         /* Number of Sequences completed */
4494         __le32 seq_completed;
4495
4496         /* Number of Sequences restarted */
4497         __le32 seq_restarted;
4498
4499         /* Number of MU Sequences posted */
4500         __le32 mu_seq_posted;
4501
4502         /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4503         __le32 mpdus_sw_flush;
4504
4505         /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4506         __le32 mpdus_hw_filter;
4507
4508         /* Num MPDUs truncated by PDG
4509          * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4510          */
4511         __le32 mpdus_truncated;
4512
4513         /* Num MPDUs that was tried but didn't receive ACK or BA */
4514         __le32 mpdus_ack_failed;
4515
4516         /* Num MPDUs that was dropped due to expiry. */
4517         __le32 mpdus_expired;
4518 } __packed;
4519
4520 struct wmi_pdev_stats_rx {
4521         /* Cnts any change in ring routing mid-ppdu */
4522         __le32 mid_ppdu_route_change;
4523
4524         /* Total number of statuses processed */
4525         __le32 status_rcvd;
4526
4527         /* Extra frags on rings 0-3 */
4528         __le32 r0_frags;
4529         __le32 r1_frags;
4530         __le32 r2_frags;
4531         __le32 r3_frags;
4532
4533         /* MSDUs / MPDUs delivered to HTT */
4534         __le32 htt_msdus;
4535         __le32 htt_mpdus;
4536
4537         /* MSDUs / MPDUs delivered to local stack */
4538         __le32 loc_msdus;
4539         __le32 loc_mpdus;
4540
4541         /* AMSDUs that have more MSDUs than the status ring size */
4542         __le32 oversize_amsdu;
4543
4544         /* Number of PHY errors */
4545         __le32 phy_errs;
4546
4547         /* Number of PHY errors drops */
4548         __le32 phy_err_drop;
4549
4550         /* Number of mpdu errors - FCS, MIC, ENC etc. */
4551         __le32 mpdu_errs;
4552 } __packed;
4553
4554 struct wmi_pdev_stats_peer {
4555         /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4556         __le32 dummy;
4557 } __packed;
4558
4559 enum wmi_stats_id {
4560         WMI_STAT_PEER = BIT(0),
4561         WMI_STAT_AP = BIT(1),
4562         WMI_STAT_PDEV = BIT(2),
4563         WMI_STAT_VDEV = BIT(3),
4564         WMI_STAT_BCNFLT = BIT(4),
4565         WMI_STAT_VDEV_RATE = BIT(5),
4566 };
4567
4568 enum wmi_10_4_stats_id {
4569         WMI_10_4_STAT_PEER              = BIT(0),
4570         WMI_10_4_STAT_AP                = BIT(1),
4571         WMI_10_4_STAT_INST              = BIT(2),
4572         WMI_10_4_STAT_PEER_EXTD         = BIT(3),
4573         WMI_10_4_STAT_VDEV_EXTD         = BIT(4),
4574 };
4575
4576 enum wmi_tlv_stats_id {
4577         WMI_TLV_STAT_PEER       = BIT(0),
4578         WMI_TLV_STAT_AP         = BIT(1),
4579         WMI_TLV_STAT_PDEV       = BIT(2),
4580         WMI_TLV_STAT_VDEV       = BIT(3),
4581         WMI_TLV_STAT_PEER_EXTD  = BIT(10),
4582 };
4583
4584 struct wlan_inst_rssi_args {
4585         __le16 cfg_retry_count;
4586         __le16 retry_count;
4587 };
4588
4589 struct wmi_request_stats_cmd {
4590         __le32 stats_id;
4591
4592         __le32 vdev_id;
4593
4594         /* peer MAC address */
4595         struct wmi_mac_addr peer_macaddr;
4596
4597         /* Instantaneous RSSI arguments */
4598         struct wlan_inst_rssi_args inst_rssi_args;
4599 } __packed;
4600
4601 enum wmi_peer_stats_info_request_type {
4602         /* request stats of one specified peer */
4603         WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,
4604         /* request stats of all peers belong to specified VDEV */
4605         WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,
4606 };
4607
4608 /* Suspend option */
4609 enum {
4610         /* suspend */
4611         WMI_PDEV_SUSPEND,
4612
4613         /* suspend and disable all interrupts */
4614         WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4615 };
4616
4617 struct wmi_pdev_suspend_cmd {
4618         /* suspend option sent to target */
4619         __le32 suspend_opt;
4620 } __packed;
4621
4622 struct wmi_stats_event {
4623         __le32 stats_id; /* WMI_STAT_ */
4624         /*
4625          * number of pdev stats event structures
4626          * (wmi_pdev_stats) 0 or 1
4627          */
4628         __le32 num_pdev_stats;
4629         /*
4630          * number of vdev stats event structures
4631          * (wmi_vdev_stats) 0 or max vdevs
4632          */
4633         __le32 num_vdev_stats;
4634         /*
4635          * number of peer stats event structures
4636          * (wmi_peer_stats) 0 or max peers
4637          */
4638         __le32 num_peer_stats;
4639         __le32 num_bcnflt_stats;
4640         /*
4641          * followed by
4642          *   num_pdev_stats * size of(struct wmi_pdev_stats)
4643          *   num_vdev_stats * size of(struct wmi_vdev_stats)
4644          *   num_peer_stats * size of(struct wmi_peer_stats)
4645          *
4646          *  By having a zero sized array, the pointer to data area
4647          *  becomes available without increasing the struct size
4648          */
4649         u8 data[];
4650 } __packed;
4651
4652 struct wmi_10_2_stats_event {
4653         __le32 stats_id; /* %WMI_REQUEST_ */
4654         __le32 num_pdev_stats;
4655         __le32 num_pdev_ext_stats;
4656         __le32 num_vdev_stats;
4657         __le32 num_peer_stats;
4658         __le32 num_bcnflt_stats;
4659         u8 data[];
4660 } __packed;
4661
4662 /*
4663  * PDEV statistics
4664  * TODO: add all PDEV stats here
4665  */
4666 struct wmi_pdev_stats_base {
4667         __le32 chan_nf;
4668         __le32 tx_frame_count; /* Cycles spent transmitting frames */
4669         __le32 rx_frame_count; /* Cycles spent receiving frames */
4670         __le32 rx_clear_count; /* Total channel busy time, evidently */
4671         __le32 cycle_count; /* Total on-channel time */
4672         __le32 phy_err_count;
4673         __le32 chan_tx_pwr;
4674 } __packed;
4675
4676 struct wmi_pdev_stats {
4677         struct wmi_pdev_stats_base base;
4678         struct wmi_pdev_stats_tx tx;
4679         struct wmi_pdev_stats_rx rx;
4680         struct wmi_pdev_stats_peer peer;
4681 } __packed;
4682
4683 struct wmi_pdev_stats_extra {
4684         __le32 ack_rx_bad;
4685         __le32 rts_bad;
4686         __le32 rts_good;
4687         __le32 fcs_bad;
4688         __le32 no_beacons;
4689         __le32 mib_int_count;
4690 } __packed;
4691
4692 struct wmi_10x_pdev_stats {
4693         struct wmi_pdev_stats_base base;
4694         struct wmi_pdev_stats_tx tx;
4695         struct wmi_pdev_stats_rx rx;
4696         struct wmi_pdev_stats_peer peer;
4697         struct wmi_pdev_stats_extra extra;
4698 } __packed;
4699
4700 struct wmi_pdev_stats_mem {
4701         __le32 dram_free;
4702         __le32 iram_free;
4703 } __packed;
4704
4705 struct wmi_10_2_pdev_stats {
4706         struct wmi_pdev_stats_base base;
4707         struct wmi_pdev_stats_tx tx;
4708         __le32 mc_drop;
4709         struct wmi_pdev_stats_rx rx;
4710         __le32 pdev_rx_timeout;
4711         struct wmi_pdev_stats_mem mem;
4712         struct wmi_pdev_stats_peer peer;
4713         struct wmi_pdev_stats_extra extra;
4714 } __packed;
4715
4716 struct wmi_10_4_pdev_stats {
4717         struct wmi_pdev_stats_base base;
4718         struct wmi_10_4_pdev_stats_tx tx;
4719         struct wmi_pdev_stats_rx rx;
4720         __le32 rx_ovfl_errs;
4721         struct wmi_pdev_stats_mem mem;
4722         __le32 sram_free_size;
4723         struct wmi_pdev_stats_extra extra;
4724 } __packed;
4725
4726 /*
4727  * VDEV statistics
4728  */
4729
4730 #define WMI_VDEV_STATS_FTM_COUNT_VALID  BIT(31)
4731 #define WMI_VDEV_STATS_FTM_COUNT_LSB    0
4732 #define WMI_VDEV_STATS_FTM_COUNT_MASK   0x7fffffff
4733
4734 struct wmi_vdev_stats {
4735         __le32 vdev_id;
4736 } __packed;
4737
4738 struct wmi_vdev_stats_extd {
4739         __le32 vdev_id;
4740         __le32 ppdu_aggr_cnt;
4741         __le32 ppdu_noack;
4742         __le32 mpdu_queued;
4743         __le32 ppdu_nonaggr_cnt;
4744         __le32 mpdu_sw_requeued;
4745         __le32 mpdu_suc_retry;
4746         __le32 mpdu_suc_multitry;
4747         __le32 mpdu_fail_retry;
4748         __le32 tx_ftm_suc;
4749         __le32 tx_ftm_suc_retry;
4750         __le32 tx_ftm_fail;
4751         __le32 rx_ftmr_cnt;
4752         __le32 rx_ftmr_dup_cnt;
4753         __le32 rx_iftmr_cnt;
4754         __le32 rx_iftmr_dup_cnt;
4755         __le32 reserved[6];
4756 } __packed;
4757
4758 /*
4759  * peer statistics.
4760  * TODO: add more stats
4761  */
4762 struct wmi_peer_stats {
4763         struct wmi_mac_addr peer_macaddr;
4764         __le32 peer_rssi;
4765         __le32 peer_tx_rate;
4766 } __packed;
4767
4768 struct wmi_10x_peer_stats {
4769         struct wmi_peer_stats old;
4770         __le32 peer_rx_rate;
4771 } __packed;
4772
4773 struct wmi_10_2_peer_stats {
4774         struct wmi_peer_stats old;
4775         __le32 peer_rx_rate;
4776         __le32 current_per;
4777         __le32 retries;
4778         __le32 tx_rate_count;
4779         __le32 max_4ms_frame_len;
4780         __le32 total_sub_frames;
4781         __le32 tx_bytes;
4782         __le32 num_pkt_loss_overflow[4];
4783         __le32 num_pkt_loss_excess_retry[4];
4784 } __packed;
4785
4786 struct wmi_10_2_4_peer_stats {
4787         struct wmi_10_2_peer_stats common;
4788         __le32 peer_rssi_changed;
4789 } __packed;
4790
4791 struct wmi_10_2_4_ext_peer_stats {
4792         struct wmi_10_2_peer_stats common;
4793         __le32 peer_rssi_changed;
4794         __le32 rx_duration;
4795 } __packed;
4796
4797 struct wmi_10_4_peer_stats {
4798         struct wmi_mac_addr peer_macaddr;
4799         __le32 peer_rssi;
4800         __le32 peer_rssi_seq_num;
4801         __le32 peer_tx_rate;
4802         __le32 peer_rx_rate;
4803         __le32 current_per;
4804         __le32 retries;
4805         __le32 tx_rate_count;
4806         __le32 max_4ms_frame_len;
4807         __le32 total_sub_frames;
4808         __le32 tx_bytes;
4809         __le32 num_pkt_loss_overflow[4];
4810         __le32 num_pkt_loss_excess_retry[4];
4811         __le32 peer_rssi_changed;
4812 } __packed;
4813
4814 struct wmi_10_4_peer_extd_stats {
4815         struct wmi_mac_addr peer_macaddr;
4816         __le32 inactive_time;
4817         __le32 peer_chain_rssi;
4818         __le32 rx_duration;
4819         __le32 reserved[10];
4820 } __packed;
4821
4822 struct wmi_10_4_bss_bcn_stats {
4823         __le32 vdev_id;
4824         __le32 bss_bcns_dropped;
4825         __le32 bss_bcn_delivered;
4826 } __packed;
4827
4828 struct wmi_10_4_bss_bcn_filter_stats {
4829         __le32 bcns_dropped;
4830         __le32 bcns_delivered;
4831         __le32 active_filters;
4832         struct wmi_10_4_bss_bcn_stats bss_stats;
4833 } __packed;
4834
4835 struct wmi_10_2_pdev_ext_stats {
4836         __le32 rx_rssi_comb;
4837         __le32 rx_rssi[4];
4838         __le32 rx_mcs[10];
4839         __le32 tx_mcs[10];
4840         __le32 ack_rssi;
4841 } __packed;
4842
4843 struct wmi_vdev_create_cmd {
4844         __le32 vdev_id;
4845         __le32 vdev_type;
4846         __le32 vdev_subtype;
4847         struct wmi_mac_addr vdev_macaddr;
4848 } __packed;
4849
4850 enum wmi_vdev_type {
4851         WMI_VDEV_TYPE_AP      = 1,
4852         WMI_VDEV_TYPE_STA     = 2,
4853         WMI_VDEV_TYPE_IBSS    = 3,
4854         WMI_VDEV_TYPE_MONITOR = 4,
4855 };
4856
4857 enum wmi_vdev_subtype {
4858         WMI_VDEV_SUBTYPE_NONE,
4859         WMI_VDEV_SUBTYPE_P2P_DEVICE,
4860         WMI_VDEV_SUBTYPE_P2P_CLIENT,
4861         WMI_VDEV_SUBTYPE_P2P_GO,
4862         WMI_VDEV_SUBTYPE_PROXY_STA,
4863         WMI_VDEV_SUBTYPE_MESH_11S,
4864         WMI_VDEV_SUBTYPE_MESH_NON_11S,
4865 };
4866
4867 enum wmi_vdev_subtype_legacy {
4868         WMI_VDEV_SUBTYPE_LEGACY_NONE      = 0,
4869         WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV   = 1,
4870         WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI   = 2,
4871         WMI_VDEV_SUBTYPE_LEGACY_P2P_GO    = 3,
4872         WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4873 };
4874
4875 enum wmi_vdev_subtype_10_2_4 {
4876         WMI_VDEV_SUBTYPE_10_2_4_NONE      = 0,
4877         WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV   = 1,
4878         WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI   = 2,
4879         WMI_VDEV_SUBTYPE_10_2_4_P2P_GO    = 3,
4880         WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4881         WMI_VDEV_SUBTYPE_10_2_4_MESH_11S  = 5,
4882 };
4883
4884 enum wmi_vdev_subtype_10_4 {
4885         WMI_VDEV_SUBTYPE_10_4_NONE         = 0,
4886         WMI_VDEV_SUBTYPE_10_4_P2P_DEV      = 1,
4887         WMI_VDEV_SUBTYPE_10_4_P2P_CLI      = 2,
4888         WMI_VDEV_SUBTYPE_10_4_P2P_GO       = 3,
4889         WMI_VDEV_SUBTYPE_10_4_PROXY_STA    = 4,
4890         WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4891         WMI_VDEV_SUBTYPE_10_4_MESH_11S     = 6,
4892 };
4893
4894 /* values for vdev_subtype */
4895
4896 /* values for vdev_start_request flags */
4897 /*
4898  * Indicates that AP VDEV uses hidden ssid. only valid for
4899  *  AP/GO
4900  */
4901 #define WMI_VDEV_START_HIDDEN_SSID  (1 << 0)
4902 /*
4903  * Indicates if robust management frame/management frame
4904  *  protection is enabled. For GO/AP vdevs, it indicates that
4905  *  it may support station/client associations with RMF enabled.
4906  *  For STA/client vdevs, it indicates that sta will
4907  *  associate with AP with RMF enabled.
4908  */
4909 #define WMI_VDEV_START_PMF_ENABLED  (1 << 1)
4910
4911 struct wmi_p2p_noa_descriptor {
4912         __le32 type_count; /* 255: continuous schedule, 0: reserved */
4913         __le32 duration;  /* Absent period duration in micro seconds */
4914         __le32 interval;   /* Absent period interval in micro seconds */
4915         __le32 start_time; /* 32 bit tsf time when in starts */
4916 } __packed;
4917
4918 struct wmi_vdev_start_request_cmd {
4919         /* WMI channel */
4920         struct wmi_channel chan;
4921         /* unique id identifying the VDEV, generated by the caller */
4922         __le32 vdev_id;
4923         /* requestor id identifying the caller module */
4924         __le32 requestor_id;
4925         /* beacon interval from received beacon */
4926         __le32 beacon_interval;
4927         /* DTIM Period from the received beacon */
4928         __le32 dtim_period;
4929         /* Flags */
4930         __le32 flags;
4931         /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4932         struct wmi_ssid ssid;
4933         /* beacon/probe response xmit rate. Applicable for SoftAP. */
4934         __le32 bcn_tx_rate;
4935         /* beacon/probe response xmit power. Applicable for SoftAP. */
4936         __le32 bcn_tx_power;
4937         /* number of p2p NOA descriptor(s) from scan entry */
4938         __le32 num_noa_descriptors;
4939         /*
4940          * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4941          * During CAC, Our HW shouldn't ack ditected frames
4942          */
4943         __le32 disable_hw_ack;
4944         /* actual p2p NOA descriptor from scan entry */
4945         struct wmi_p2p_noa_descriptor noa_descriptors[2];
4946 } __packed;
4947
4948 struct wmi_vdev_restart_request_cmd {
4949         struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4950 } __packed;
4951
4952 struct wmi_vdev_start_request_arg {
4953         u32 vdev_id;
4954         struct wmi_channel_arg channel;
4955         u32 bcn_intval;
4956         u32 dtim_period;
4957         u8 *ssid;
4958         u32 ssid_len;
4959         u32 bcn_tx_rate;
4960         u32 bcn_tx_power;
4961         bool disable_hw_ack;
4962         bool hidden_ssid;
4963         bool pmf_enabled;
4964 };
4965
4966 struct wmi_vdev_delete_cmd {
4967         /* unique id identifying the VDEV, generated by the caller */
4968         __le32 vdev_id;
4969 } __packed;
4970
4971 struct wmi_vdev_up_cmd {
4972         __le32 vdev_id;
4973         __le32 vdev_assoc_id;
4974         struct wmi_mac_addr vdev_bssid;
4975 } __packed;
4976
4977 struct wmi_vdev_stop_cmd {
4978         __le32 vdev_id;
4979 } __packed;
4980
4981 struct wmi_vdev_down_cmd {
4982         __le32 vdev_id;
4983 } __packed;
4984
4985 struct wmi_vdev_standby_response_cmd {
4986         /* unique id identifying the VDEV, generated by the caller */
4987         __le32 vdev_id;
4988 } __packed;
4989
4990 struct wmi_vdev_resume_response_cmd {
4991         /* unique id identifying the VDEV, generated by the caller */
4992         __le32 vdev_id;
4993 } __packed;
4994
4995 struct wmi_vdev_set_param_cmd {
4996         __le32 vdev_id;
4997         __le32 param_id;
4998         __le32 param_value;
4999 } __packed;
5000
5001 #define WMI_MAX_KEY_INDEX   3
5002 #define WMI_MAX_KEY_LEN     32
5003
5004 #define WMI_KEY_PAIRWISE 0x00
5005 #define WMI_KEY_GROUP    0x01
5006 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
5007
5008 struct wmi_key_seq_counter {
5009         __le32 key_seq_counter_l;
5010         __le32 key_seq_counter_h;
5011 } __packed;
5012
5013 enum wmi_cipher_suites {
5014         WMI_CIPHER_NONE,
5015         WMI_CIPHER_WEP,
5016         WMI_CIPHER_TKIP,
5017         WMI_CIPHER_AES_OCB,
5018         WMI_CIPHER_AES_CCM,
5019         WMI_CIPHER_WAPI,
5020         WMI_CIPHER_CKIP,
5021         WMI_CIPHER_AES_CMAC,
5022         WMI_CIPHER_AES_GCM,
5023 };
5024
5025 enum wmi_tlv_cipher_suites {
5026         WMI_TLV_CIPHER_NONE,
5027         WMI_TLV_CIPHER_WEP,
5028         WMI_TLV_CIPHER_TKIP,
5029         WMI_TLV_CIPHER_AES_OCB,
5030         WMI_TLV_CIPHER_AES_CCM,
5031         WMI_TLV_CIPHER_WAPI,
5032         WMI_TLV_CIPHER_CKIP,
5033         WMI_TLV_CIPHER_AES_CMAC,
5034         WMI_TLV_CIPHER_ANY,
5035         WMI_TLV_CIPHER_AES_GCM,
5036 };
5037
5038 struct wmi_vdev_install_key_cmd {
5039         __le32 vdev_id;
5040         struct wmi_mac_addr peer_macaddr;
5041         __le32 key_idx;
5042         __le32 key_flags;
5043         __le32 key_cipher; /* %WMI_CIPHER_ */
5044         struct wmi_key_seq_counter key_rsc_counter;
5045         struct wmi_key_seq_counter key_global_rsc_counter;
5046         struct wmi_key_seq_counter key_tsc_counter;
5047         u8 wpi_key_rsc_counter[16];
5048         u8 wpi_key_tsc_counter[16];
5049         __le32 key_len;
5050         __le32 key_txmic_len;
5051         __le32 key_rxmic_len;
5052
5053         /* contains key followed by tx mic followed by rx mic */
5054         u8 key_data[];
5055 } __packed;
5056
5057 struct wmi_vdev_install_key_arg {
5058         u32 vdev_id;
5059         const u8 *macaddr;
5060         u32 key_idx;
5061         u32 key_flags;
5062         u32 key_cipher;
5063         u32 key_len;
5064         u32 key_txmic_len;
5065         u32 key_rxmic_len;
5066         const void *key_data;
5067 };
5068
5069 /*
5070  * vdev fixed rate format:
5071  * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
5072  * - nss      - b5:b4 - ss number (0 mean 1ss)
5073  * - rate_mcs - b3:b0 - as below
5074  *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
5075  *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
5076  *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
5077  *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
5078  *    HT/VHT: MCS index
5079  */
5080
5081 /* Preamble types to be used with VDEV fixed rate configuration */
5082 enum wmi_rate_preamble {
5083         WMI_RATE_PREAMBLE_OFDM,
5084         WMI_RATE_PREAMBLE_CCK,
5085         WMI_RATE_PREAMBLE_HT,
5086         WMI_RATE_PREAMBLE_VHT,
5087 };
5088
5089 #define ATH10K_HW_NSS(rate)             (1 + (((rate) >> 4) & 0x3))
5090 #define ATH10K_HW_PREAMBLE(rate)        (((rate) >> 6) & 0x3)
5091 #define ATH10K_HW_MCS_RATE(rate)        ((rate) & 0xf)
5092 #define ATH10K_HW_LEGACY_RATE(rate)     ((rate) & 0x3f)
5093 #define ATH10K_HW_BW(flags)             (((flags) >> 3) & 0x3)
5094 #define ATH10K_HW_GI(flags)             (((flags) >> 5) & 0x1)
5095 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
5096         (((preamble) << 6) | ((nss) << 4) | (rate))
5097 #define ATH10K_HW_AMPDU(flags)          ((flags) & 0x1)
5098 #define ATH10K_HW_BA_FAIL(flags)        (((flags) >> 1) & 0x3)
5099 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags)      (((flags) >> 6) & 0x1)
5100
5101 #define ATH10K_VHT_MCS_NUM      10
5102 #define ATH10K_BW_NUM           6
5103 #define ATH10K_NSS_NUM          4
5104 #define ATH10K_LEGACY_NUM       12
5105 #define ATH10K_GI_NUM           2
5106 #define ATH10K_HT_MCS_NUM       32
5107 #define ATH10K_RATE_TABLE_NUM   320
5108 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT  2
5109
5110 /* Value to disable fixed rate setting */
5111 #define WMI_FIXED_RATE_NONE    (0xff)
5112
5113 struct wmi_peer_param_map {
5114         u32 smps_state;
5115         u32 ampdu;
5116         u32 authorize;
5117         u32 chan_width;
5118         u32 nss;
5119         u32 use_4addr;
5120         u32 membership;
5121         u32 use_fixed_power;
5122         u32 user_pos;
5123         u32 crit_proto_hint_enabled;
5124         u32 tx_fail_cnt_thr;
5125         u32 set_hw_retry_cts2s;
5126         u32 ibss_atim_win_len;
5127         u32 debug;
5128         u32 phymode;
5129         u32 dummy_var;
5130 };
5131
5132 struct wmi_vdev_param_map {
5133         u32 rts_threshold;
5134         u32 fragmentation_threshold;
5135         u32 beacon_interval;
5136         u32 listen_interval;
5137         u32 multicast_rate;
5138         u32 mgmt_tx_rate;
5139         u32 slot_time;
5140         u32 preamble;
5141         u32 swba_time;
5142         u32 wmi_vdev_stats_update_period;
5143         u32 wmi_vdev_pwrsave_ageout_time;
5144         u32 wmi_vdev_host_swba_interval;
5145         u32 dtim_period;
5146         u32 wmi_vdev_oc_scheduler_air_time_limit;
5147         u32 wds;
5148         u32 atim_window;
5149         u32 bmiss_count_max;
5150         u32 bmiss_first_bcnt;
5151         u32 bmiss_final_bcnt;
5152         u32 feature_wmm;
5153         u32 chwidth;
5154         u32 chextoffset;
5155         u32 disable_htprotection;
5156         u32 sta_quickkickout;
5157         u32 mgmt_rate;
5158         u32 protection_mode;
5159         u32 fixed_rate;
5160         u32 sgi;
5161         u32 ldpc;
5162         u32 tx_stbc;
5163         u32 rx_stbc;
5164         u32 intra_bss_fwd;
5165         u32 def_keyid;
5166         u32 nss;
5167         u32 bcast_data_rate;
5168         u32 mcast_data_rate;
5169         u32 mcast_indicate;
5170         u32 dhcp_indicate;
5171         u32 unknown_dest_indicate;
5172         u32 ap_keepalive_min_idle_inactive_time_secs;
5173         u32 ap_keepalive_max_idle_inactive_time_secs;
5174         u32 ap_keepalive_max_unresponsive_time_secs;
5175         u32 ap_enable_nawds;
5176         u32 mcast2ucast_set;
5177         u32 enable_rtscts;
5178         u32 txbf;
5179         u32 packet_powersave;
5180         u32 drop_unencry;
5181         u32 tx_encap_type;
5182         u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
5183         u32 rc_num_retries;
5184         u32 cabq_maxdur;
5185         u32 mfptest_set;
5186         u32 rts_fixed_rate;
5187         u32 vht_sgimask;
5188         u32 vht80_ratemask;
5189         u32 early_rx_adjust_enable;
5190         u32 early_rx_tgt_bmiss_num;
5191         u32 early_rx_bmiss_sample_cycle;
5192         u32 early_rx_slop_step;
5193         u32 early_rx_init_slop;
5194         u32 early_rx_adjust_pause;
5195         u32 proxy_sta;
5196         u32 meru_vc;
5197         u32 rx_decap_type;
5198         u32 bw_nss_ratemask;
5199         u32 inc_tsf;
5200         u32 dec_tsf;
5201         u32 disable_4addr_src_lrn;
5202         u32 rtt_responder_role;
5203 };
5204
5205 #define WMI_VDEV_PARAM_UNSUPPORTED 0
5206
5207 /* the definition of different VDEV parameters */
5208 enum wmi_vdev_param {
5209         /* RTS Threshold */
5210         WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5211         /* Fragmentation threshold */
5212         WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5213         /* beacon interval in TUs */
5214         WMI_VDEV_PARAM_BEACON_INTERVAL,
5215         /* Listen interval in TUs */
5216         WMI_VDEV_PARAM_LISTEN_INTERVAL,
5217         /* multicast rate in Mbps */
5218         WMI_VDEV_PARAM_MULTICAST_RATE,
5219         /* management frame rate in Mbps */
5220         WMI_VDEV_PARAM_MGMT_TX_RATE,
5221         /* slot time (long vs short) */
5222         WMI_VDEV_PARAM_SLOT_TIME,
5223         /* preamble (long vs short) */
5224         WMI_VDEV_PARAM_PREAMBLE,
5225         /* SWBA time (time before tbtt in msec) */
5226         WMI_VDEV_PARAM_SWBA_TIME,
5227         /* time period for updating VDEV stats */
5228         WMI_VDEV_STATS_UPDATE_PERIOD,
5229         /* age out time in msec for frames queued for station in power save */
5230         WMI_VDEV_PWRSAVE_AGEOUT_TIME,
5231         /*
5232          * Host SWBA interval (time in msec before tbtt for SWBA event
5233          * generation).
5234          */
5235         WMI_VDEV_HOST_SWBA_INTERVAL,
5236         /* DTIM period (specified in units of num beacon intervals) */
5237         WMI_VDEV_PARAM_DTIM_PERIOD,
5238         /*
5239          * scheduler air time limit for this VDEV. used by off chan
5240          * scheduler.
5241          */
5242         WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5243         /* enable/dsiable WDS for this VDEV  */
5244         WMI_VDEV_PARAM_WDS,
5245         /* ATIM Window */
5246         WMI_VDEV_PARAM_ATIM_WINDOW,
5247         /* BMISS max */
5248         WMI_VDEV_PARAM_BMISS_COUNT_MAX,
5249         /* BMISS first time */
5250         WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
5251         /* BMISS final time */
5252         WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
5253         /* WMM enables/disabled */
5254         WMI_VDEV_PARAM_FEATURE_WMM,
5255         /* Channel width */
5256         WMI_VDEV_PARAM_CHWIDTH,
5257         /* Channel Offset */
5258         WMI_VDEV_PARAM_CHEXTOFFSET,
5259         /* Disable HT Protection */
5260         WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
5261         /* Quick STA Kickout */
5262         WMI_VDEV_PARAM_STA_QUICKKICKOUT,
5263         /* Rate to be used with Management frames */
5264         WMI_VDEV_PARAM_MGMT_RATE,
5265         /* Protection Mode */
5266         WMI_VDEV_PARAM_PROTECTION_MODE,
5267         /* Fixed rate setting */
5268         WMI_VDEV_PARAM_FIXED_RATE,
5269         /* Short GI Enable/Disable */
5270         WMI_VDEV_PARAM_SGI,
5271         /* Enable LDPC */
5272         WMI_VDEV_PARAM_LDPC,
5273         /* Enable Tx STBC */
5274         WMI_VDEV_PARAM_TX_STBC,
5275         /* Enable Rx STBC */
5276         WMI_VDEV_PARAM_RX_STBC,
5277         /* Intra BSS forwarding  */
5278         WMI_VDEV_PARAM_INTRA_BSS_FWD,
5279         /* Setting Default xmit key for Vdev */
5280         WMI_VDEV_PARAM_DEF_KEYID,
5281         /* NSS width */
5282         WMI_VDEV_PARAM_NSS,
5283         /* Set the custom rate for the broadcast data frames */
5284         WMI_VDEV_PARAM_BCAST_DATA_RATE,
5285         /* Set the custom rate (rate-code) for multicast data frames */
5286         WMI_VDEV_PARAM_MCAST_DATA_RATE,
5287         /* Tx multicast packet indicate Enable/Disable */
5288         WMI_VDEV_PARAM_MCAST_INDICATE,
5289         /* Tx DHCP packet indicate Enable/Disable */
5290         WMI_VDEV_PARAM_DHCP_INDICATE,
5291         /* Enable host inspection of Tx unicast packet to unknown destination */
5292         WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5293
5294         /* The minimum amount of time AP begins to consider STA inactive */
5295         WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5296
5297         /*
5298          * An associated STA is considered inactive when there is no recent
5299          * TX/RX activity and no downlink frames are buffered for it. Once a
5300          * STA exceeds the maximum idle inactive time, the AP will send an
5301          * 802.11 data-null as a keep alive to verify the STA is still
5302          * associated. If the STA does ACK the data-null, or if the data-null
5303          * is buffered and the STA does not retrieve it, the STA will be
5304          * considered unresponsive
5305          * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5306          */
5307         WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5308
5309         /*
5310          * An associated STA is considered unresponsive if there is no recent
5311          * TX/RX activity and downlink frames are buffered for it. Once a STA
5312          * exceeds the maximum unresponsive time, the AP will send a
5313          * WMI_STA_KICKOUT event to the host so the STA can be deleted.
5314          */
5315         WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5316
5317         /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5318         WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
5319         /* Enable/Disable RTS-CTS */
5320         WMI_VDEV_PARAM_ENABLE_RTSCTS,
5321         /* Enable TXBFee/er */
5322         WMI_VDEV_PARAM_TXBF,
5323
5324         /* Set packet power save */
5325         WMI_VDEV_PARAM_PACKET_POWERSAVE,
5326
5327         /*
5328          * Drops un-encrypted packets if eceived in an encrypted connection
5329          * otherwise forwards to host.
5330          */
5331         WMI_VDEV_PARAM_DROP_UNENCRY,
5332
5333         /*
5334          * Set the encapsulation type for frames.
5335          */
5336         WMI_VDEV_PARAM_TX_ENCAP_TYPE,
5337 };
5338
5339 /* the definition of different VDEV parameters */
5340 enum wmi_10x_vdev_param {
5341         /* RTS Threshold */
5342         WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5343         /* Fragmentation threshold */
5344         WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5345         /* beacon interval in TUs */
5346         WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
5347         /* Listen interval in TUs */
5348         WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
5349         /* multicast rate in Mbps */
5350         WMI_10X_VDEV_PARAM_MULTICAST_RATE,
5351         /* management frame rate in Mbps */
5352         WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
5353         /* slot time (long vs short) */
5354         WMI_10X_VDEV_PARAM_SLOT_TIME,
5355         /* preamble (long vs short) */
5356         WMI_10X_VDEV_PARAM_PREAMBLE,
5357         /* SWBA time (time before tbtt in msec) */
5358         WMI_10X_VDEV_PARAM_SWBA_TIME,
5359         /* time period for updating VDEV stats */
5360         WMI_10X_VDEV_STATS_UPDATE_PERIOD,
5361         /* age out time in msec for frames queued for station in power save */
5362         WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
5363         /*
5364          * Host SWBA interval (time in msec before tbtt for SWBA event
5365          * generation).
5366          */
5367         WMI_10X_VDEV_HOST_SWBA_INTERVAL,
5368         /* DTIM period (specified in units of num beacon intervals) */
5369         WMI_10X_VDEV_PARAM_DTIM_PERIOD,
5370         /*
5371          * scheduler air time limit for this VDEV. used by off chan
5372          * scheduler.
5373          */
5374         WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5375         /* enable/dsiable WDS for this VDEV  */
5376         WMI_10X_VDEV_PARAM_WDS,
5377         /* ATIM Window */
5378         WMI_10X_VDEV_PARAM_ATIM_WINDOW,
5379         /* BMISS max */
5380         WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
5381         /* WMM enables/disabled */
5382         WMI_10X_VDEV_PARAM_FEATURE_WMM,
5383         /* Channel width */
5384         WMI_10X_VDEV_PARAM_CHWIDTH,
5385         /* Channel Offset */
5386         WMI_10X_VDEV_PARAM_CHEXTOFFSET,
5387         /* Disable HT Protection */
5388         WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
5389         /* Quick STA Kickout */
5390         WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
5391         /* Rate to be used with Management frames */
5392         WMI_10X_VDEV_PARAM_MGMT_RATE,
5393         /* Protection Mode */
5394         WMI_10X_VDEV_PARAM_PROTECTION_MODE,
5395         /* Fixed rate setting */
5396         WMI_10X_VDEV_PARAM_FIXED_RATE,
5397         /* Short GI Enable/Disable */
5398         WMI_10X_VDEV_PARAM_SGI,
5399         /* Enable LDPC */
5400         WMI_10X_VDEV_PARAM_LDPC,
5401         /* Enable Tx STBC */
5402         WMI_10X_VDEV_PARAM_TX_STBC,
5403         /* Enable Rx STBC */
5404         WMI_10X_VDEV_PARAM_RX_STBC,
5405         /* Intra BSS forwarding  */
5406         WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
5407         /* Setting Default xmit key for Vdev */
5408         WMI_10X_VDEV_PARAM_DEF_KEYID,
5409         /* NSS width */
5410         WMI_10X_VDEV_PARAM_NSS,
5411         /* Set the custom rate for the broadcast data frames */
5412         WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
5413         /* Set the custom rate (rate-code) for multicast data frames */
5414         WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
5415         /* Tx multicast packet indicate Enable/Disable */
5416         WMI_10X_VDEV_PARAM_MCAST_INDICATE,
5417         /* Tx DHCP packet indicate Enable/Disable */
5418         WMI_10X_VDEV_PARAM_DHCP_INDICATE,
5419         /* Enable host inspection of Tx unicast packet to unknown destination */
5420         WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5421
5422         /* The minimum amount of time AP begins to consider STA inactive */
5423         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5424
5425         /*
5426          * An associated STA is considered inactive when there is no recent
5427          * TX/RX activity and no downlink frames are buffered for it. Once a
5428          * STA exceeds the maximum idle inactive time, the AP will send an
5429          * 802.11 data-null as a keep alive to verify the STA is still
5430          * associated. If the STA does ACK the data-null, or if the data-null
5431          * is buffered and the STA does not retrieve it, the STA will be
5432          * considered unresponsive
5433          * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5434          */
5435         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5436
5437         /*
5438          * An associated STA is considered unresponsive if there is no recent
5439          * TX/RX activity and downlink frames are buffered for it. Once a STA
5440          * exceeds the maximum unresponsive time, the AP will send a
5441          * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
5442          */
5443         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5444
5445         /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5446         WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
5447
5448         WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
5449         /* Enable/Disable RTS-CTS */
5450         WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
5451
5452         WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5453
5454         /* following are available as of firmware 10.2 */
5455         WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
5456         WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
5457         WMI_10X_VDEV_PARAM_MFPTEST_SET,
5458         WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
5459         WMI_10X_VDEV_PARAM_VHT_SGIMASK,
5460         WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
5461         WMI_10X_VDEV_PARAM_TSF_INCREMENT,
5462 };
5463
5464 enum wmi_10_4_vdev_param {
5465         WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5466         WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5467         WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
5468         WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
5469         WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
5470         WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
5471         WMI_10_4_VDEV_PARAM_SLOT_TIME,
5472         WMI_10_4_VDEV_PARAM_PREAMBLE,
5473         WMI_10_4_VDEV_PARAM_SWBA_TIME,
5474         WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
5475         WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
5476         WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
5477         WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
5478         WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5479         WMI_10_4_VDEV_PARAM_WDS,
5480         WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
5481         WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
5482         WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
5483         WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
5484         WMI_10_4_VDEV_PARAM_FEATURE_WMM,
5485         WMI_10_4_VDEV_PARAM_CHWIDTH,
5486         WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
5487         WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
5488         WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
5489         WMI_10_4_VDEV_PARAM_MGMT_RATE,
5490         WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
5491         WMI_10_4_VDEV_PARAM_FIXED_RATE,
5492         WMI_10_4_VDEV_PARAM_SGI,
5493         WMI_10_4_VDEV_PARAM_LDPC,
5494         WMI_10_4_VDEV_PARAM_TX_STBC,
5495         WMI_10_4_VDEV_PARAM_RX_STBC,
5496         WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
5497         WMI_10_4_VDEV_PARAM_DEF_KEYID,
5498         WMI_10_4_VDEV_PARAM_NSS,
5499         WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
5500         WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
5501         WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
5502         WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
5503         WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5504         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5505         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5506         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5507         WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
5508         WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
5509         WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
5510         WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
5511         WMI_10_4_VDEV_PARAM_TXBF,
5512         WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
5513         WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
5514         WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
5515         WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5516         WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
5517         WMI_10_4_VDEV_PARAM_MFPTEST_SET,
5518         WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
5519         WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
5520         WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
5521         WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
5522         WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
5523         WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
5524         WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
5525         WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
5526         WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
5527         WMI_10_4_VDEV_PARAM_PROXY_STA,
5528         WMI_10_4_VDEV_PARAM_MERU_VC,
5529         WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5530         WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5531         WMI_10_4_VDEV_PARAM_SENSOR_AP,
5532         WMI_10_4_VDEV_PARAM_BEACON_RATE,
5533         WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5534         WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5535         WMI_10_4_VDEV_PARAM_CAPABILITIES,
5536         WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5537         WMI_10_4_VDEV_PARAM_RX_FILTER,
5538         WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
5539         WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
5540         WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
5541         WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
5542         WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
5543         WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
5544         WMI_10_4_VDEV_PARAM_NSS_VHT160,
5545         WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
5546         WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
5547         WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
5548         WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
5549         WMI_10_4_VDEV_PARAM_TX_POWER,
5550         WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
5551         WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
5552 };
5553
5554 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
5555
5556 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5557 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5558 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5559 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5560
5561 #define WMI_TXBF_STS_CAP_OFFSET_LSB     4
5562 #define WMI_TXBF_STS_CAP_OFFSET_MASK    0x70
5563 #define WMI_TXBF_CONF_IMPLICIT_BF       BIT(7)
5564 #define WMI_BF_SOUND_DIM_OFFSET_LSB     8
5565 #define WMI_BF_SOUND_DIM_OFFSET_MASK    0xf00
5566
5567 /* slot time long */
5568 #define WMI_VDEV_SLOT_TIME_LONG         0x1
5569 /* slot time short */
5570 #define WMI_VDEV_SLOT_TIME_SHORT        0x2
5571 /* preablbe long */
5572 #define WMI_VDEV_PREAMBLE_LONG          0x1
5573 /* preablbe short */
5574 #define WMI_VDEV_PREAMBLE_SHORT         0x2
5575
5576 enum wmi_start_event_param {
5577         WMI_VDEV_RESP_START_EVENT = 0,
5578         WMI_VDEV_RESP_RESTART_EVENT,
5579 };
5580
5581 struct wmi_vdev_start_response_event {
5582         __le32 vdev_id;
5583         __le32 req_id;
5584         __le32 resp_type; /* %WMI_VDEV_RESP_ */
5585         __le32 status;
5586 } __packed;
5587
5588 struct wmi_vdev_standby_req_event {
5589         /* unique id identifying the VDEV, generated by the caller */
5590         __le32 vdev_id;
5591 } __packed;
5592
5593 struct wmi_vdev_resume_req_event {
5594         /* unique id identifying the VDEV, generated by the caller */
5595         __le32 vdev_id;
5596 } __packed;
5597
5598 struct wmi_vdev_stopped_event {
5599         /* unique id identifying the VDEV, generated by the caller */
5600         __le32 vdev_id;
5601 } __packed;
5602
5603 /*
5604  * common structure used for simple events
5605  * (stopped, resume_req, standby response)
5606  */
5607 struct wmi_vdev_simple_event {
5608         /* unique id identifying the VDEV, generated by the caller */
5609         __le32 vdev_id;
5610 } __packed;
5611
5612 /* VDEV start response status codes */
5613 /* VDEV successfully started */
5614 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS  0x0
5615
5616 /* requested VDEV not found */
5617 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID  0x1
5618
5619 /* unsupported VDEV combination */
5620 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED   0x2
5621
5622 /* TODO: please add more comments if you have in-depth information */
5623 struct wmi_vdev_spectral_conf_cmd {
5624         __le32 vdev_id;
5625
5626         /* number of fft samples to send (0 for infinite) */
5627         __le32 scan_count;
5628         __le32 scan_period;
5629         __le32 scan_priority;
5630
5631         /* number of bins in the FFT: 2^(fft_size - bin_scale) */
5632         __le32 scan_fft_size;
5633         __le32 scan_gc_ena;
5634         __le32 scan_restart_ena;
5635         __le32 scan_noise_floor_ref;
5636         __le32 scan_init_delay;
5637         __le32 scan_nb_tone_thr;
5638         __le32 scan_str_bin_thr;
5639         __le32 scan_wb_rpt_mode;
5640         __le32 scan_rssi_rpt_mode;
5641         __le32 scan_rssi_thr;
5642         __le32 scan_pwr_format;
5643
5644         /* rpt_mode: Format of FFT report to software for spectral scan
5645          * triggered FFTs:
5646          *      0: No FFT report (only spectral scan summary report)
5647          *      1: 2-dword summary of metrics for each completed FFT + spectral
5648          *         scan summary report
5649          *      2: 2-dword summary of metrics for each completed FFT +
5650          *         1x- oversampled bins(in-band) per FFT + spectral scan summary
5651          *         report
5652          *      3: 2-dword summary of metrics for each completed FFT +
5653          *         2x- oversampled bins (all) per FFT + spectral scan summary
5654          */
5655         __le32 scan_rpt_mode;
5656         __le32 scan_bin_scale;
5657         __le32 scan_dbm_adj;
5658         __le32 scan_chn_mask;
5659 } __packed;
5660
5661 struct wmi_vdev_spectral_conf_arg {
5662         u32 vdev_id;
5663         u32 scan_count;
5664         u32 scan_period;
5665         u32 scan_priority;
5666         u32 scan_fft_size;
5667         u32 scan_gc_ena;
5668         u32 scan_restart_ena;
5669         u32 scan_noise_floor_ref;
5670         u32 scan_init_delay;
5671         u32 scan_nb_tone_thr;
5672         u32 scan_str_bin_thr;
5673         u32 scan_wb_rpt_mode;
5674         u32 scan_rssi_rpt_mode;
5675         u32 scan_rssi_thr;
5676         u32 scan_pwr_format;
5677         u32 scan_rpt_mode;
5678         u32 scan_bin_scale;
5679         u32 scan_dbm_adj;
5680         u32 scan_chn_mask;
5681 };
5682
5683 #define WMI_SPECTRAL_ENABLE_DEFAULT              0
5684 #define WMI_SPECTRAL_COUNT_DEFAULT               0
5685 #define WMI_SPECTRAL_PERIOD_DEFAULT             35
5686 #define WMI_SPECTRAL_PRIORITY_DEFAULT            1
5687 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT            7
5688 #define WMI_SPECTRAL_GC_ENA_DEFAULT              1
5689 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT         0
5690 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT   -96
5691 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT         80
5692 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT        12
5693 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT         8
5694 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT         0
5695 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT       0
5696 #define WMI_SPECTRAL_RSSI_THR_DEFAULT         0xf0
5697 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT          0
5698 #define WMI_SPECTRAL_RPT_MODE_DEFAULT            2
5699 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT           1
5700 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT             1
5701 #define WMI_SPECTRAL_CHN_MASK_DEFAULT            1
5702
5703 struct wmi_vdev_spectral_enable_cmd {
5704         __le32 vdev_id;
5705         __le32 trigger_cmd;
5706         __le32 enable_cmd;
5707 } __packed;
5708
5709 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER  1
5710 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR    2
5711 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE    1
5712 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE   2
5713
5714 /* Beacon processing related command and event structures */
5715 struct wmi_bcn_tx_hdr {
5716         __le32 vdev_id;
5717         __le32 tx_rate;
5718         __le32 tx_power;
5719         __le32 bcn_len;
5720 } __packed;
5721
5722 struct wmi_bcn_tx_cmd {
5723         struct wmi_bcn_tx_hdr hdr;
5724         u8 *bcn[];
5725 } __packed;
5726
5727 struct wmi_bcn_tx_arg {
5728         u32 vdev_id;
5729         u32 tx_rate;
5730         u32 tx_power;
5731         u32 bcn_len;
5732         const void *bcn;
5733 };
5734
5735 enum wmi_bcn_tx_ref_flags {
5736         WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5737         WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5738 };
5739
5740 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5741  * chainmask yields no beacons on the air at all.
5742  */
5743 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5744
5745 struct wmi_bcn_tx_ref_cmd {
5746         __le32 vdev_id;
5747         __le32 data_len;
5748         /* physical address of the frame - dma pointer */
5749         __le32 data_ptr;
5750         /* id for host to track */
5751         __le32 msdu_id;
5752         /* frame ctrl to setup PPDU desc */
5753         __le32 frame_control;
5754         /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5755         __le32 flags;
5756         /* introduced in 10.2 */
5757         __le32 antenna_mask;
5758 } __packed;
5759
5760 /* Beacon filter */
5761 #define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
5762 #define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
5763 #define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */
5764 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5765 #define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */
5766
5767 struct wmi_bcn_filter_rx_cmd {
5768         /* Filter ID */
5769         __le32 bcn_filter_id;
5770         /* Filter type - wmi_bcn_filter */
5771         __le32 bcn_filter;
5772         /* Buffer len */
5773         __le32 bcn_filter_len;
5774         /* Filter info (threshold, BSSID, RSSI) */
5775         u8 *bcn_filter_buf;
5776 } __packed;
5777
5778 /* Capabilities and IEs to be passed to firmware */
5779 struct wmi_bcn_prb_info {
5780         /* Capabilities */
5781         __le32 caps;
5782         /* ERP info */
5783         __le32 erp;
5784         /* Advanced capabilities */
5785         /* HT capabilities */
5786         /* HT Info */
5787         /* ibss_dfs */
5788         /* wpa Info */
5789         /* rsn Info */
5790         /* rrm info */
5791         /* ath_ext */
5792         /* app IE */
5793 } __packed;
5794
5795 struct wmi_bcn_tmpl_cmd {
5796         /* unique id identifying the VDEV, generated by the caller */
5797         __le32 vdev_id;
5798         /* TIM IE offset from the beginning of the template. */
5799         __le32 tim_ie_offset;
5800         /* beacon probe capabilities and IEs */
5801         struct wmi_bcn_prb_info bcn_prb_info;
5802         /* beacon buffer length */
5803         __le32 buf_len;
5804         /* variable length data */
5805         u8 data[1];
5806 } __packed;
5807
5808 struct wmi_prb_tmpl_cmd {
5809         /* unique id identifying the VDEV, generated by the caller */
5810         __le32 vdev_id;
5811         /* beacon probe capabilities and IEs */
5812         struct wmi_bcn_prb_info bcn_prb_info;
5813         /* beacon buffer length */
5814         __le32 buf_len;
5815         /* Variable length data */
5816         u8 data[1];
5817 } __packed;
5818
5819 enum wmi_sta_ps_mode {
5820         /* enable power save for the given STA VDEV */
5821         WMI_STA_PS_MODE_DISABLED = 0,
5822         /* disable power save  for a given STA VDEV */
5823         WMI_STA_PS_MODE_ENABLED = 1,
5824 };
5825
5826 struct wmi_sta_powersave_mode_cmd {
5827         /* unique id identifying the VDEV, generated by the caller */
5828         __le32 vdev_id;
5829
5830         /*
5831          * Power save mode
5832          * (see enum wmi_sta_ps_mode)
5833          */
5834         __le32 sta_ps_mode;
5835 } __packed;
5836
5837 enum wmi_csa_offload_en {
5838         WMI_CSA_OFFLOAD_DISABLE = 0,
5839         WMI_CSA_OFFLOAD_ENABLE = 1,
5840 };
5841
5842 struct wmi_csa_offload_enable_cmd {
5843         __le32 vdev_id;
5844         __le32 csa_offload_enable;
5845 } __packed;
5846
5847 struct wmi_csa_offload_chanswitch_cmd {
5848         __le32 vdev_id;
5849         struct wmi_channel chan;
5850 } __packed;
5851
5852 /*
5853  * This parameter controls the policy for retrieving frames from AP while the
5854  * STA is in sleep state.
5855  *
5856  * Only takes affect if the sta_ps_mode is enabled
5857  */
5858 enum wmi_sta_ps_param_rx_wake_policy {
5859         /*
5860          * Wake up when ever there is an  RX activity on the VDEV. In this mode
5861          * the Power save SM(state machine) will come out of sleep by either
5862          * sending null frame (or) a data frame (with PS==0) in response to TIM
5863          * bit set in the received beacon frame from AP.
5864          */
5865         WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5866
5867         /*
5868          * Here the power save state machine will not wakeup in response to TIM
5869          * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5870          * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all
5871          * access categories are delivery-enabled, the station will send a
5872          * UAPSD trigger frame, otherwise it will send a PS-Poll.
5873          */
5874         WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5875 };
5876
5877 /*
5878  * Number of tx frames/beacon  that cause the power save SM to wake up.
5879  *
5880  * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5881  * meaning, It will cause the SM to never wake up. This is useful if you want
5882  * to keep the system to sleep all the time for some kind of test mode . host
5883  * can change this parameter any time.  It will affect at the next tx frame.
5884  */
5885 enum wmi_sta_ps_param_tx_wake_threshold {
5886         WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5887         WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5888
5889         /*
5890          * Values greater than one indicate that many TX attempts per beacon
5891          * interval before the STA will wake up
5892          */
5893 };
5894
5895 /*
5896  * The maximum number of PS-Poll frames the FW will send in response to
5897  * traffic advertised in TIM before waking up (by sending a null frame with PS
5898  * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5899  * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5900  * parameter is used when the RX wake policy is
5901  * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5902  * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5903  */
5904 enum wmi_sta_ps_param_pspoll_count {
5905         WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5906         /*
5907          * Values greater than 0 indicate the maximum numer of PS-Poll frames
5908          * FW will send before waking up.
5909          */
5910
5911         /* When u-APSD is enabled the firmware will be very reluctant to exit
5912          * STA PS. This could result in very poor Rx performance with STA doing
5913          * PS-Poll for each and every buffered frame. This value is a bit
5914          * arbitrary.
5915          */
5916         WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5917 };
5918
5919 /*
5920  * This will include the delivery and trigger enabled state for every AC.
5921  * This is the negotiated state with AP. The host MLME needs to set this based
5922  * on AP capability and the state Set in the association request by the
5923  * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5924  */
5925 #define WMI_UAPSD_AC_TYPE_DELI 0
5926 #define WMI_UAPSD_AC_TYPE_TRIG 1
5927
5928 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5929         (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
5930
5931 enum wmi_sta_ps_param_uapsd {
5932         WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5933         WMI_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
5934         WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5935         WMI_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
5936         WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5937         WMI_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
5938         WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5939         WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
5940 };
5941
5942 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5943
5944 struct wmi_sta_uapsd_auto_trig_param {
5945         __le32 wmm_ac;
5946         __le32 user_priority;
5947         __le32 service_interval;
5948         __le32 suspend_interval;
5949         __le32 delay_interval;
5950 };
5951
5952 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5953         __le32 vdev_id;
5954         struct wmi_mac_addr peer_macaddr;
5955         __le32 num_ac;
5956 };
5957
5958 struct wmi_sta_uapsd_auto_trig_arg {
5959         u32 wmm_ac;
5960         u32 user_priority;
5961         u32 service_interval;
5962         u32 suspend_interval;
5963         u32 delay_interval;
5964 };
5965
5966 enum wmi_sta_powersave_param {
5967         /*
5968          * Controls how frames are retrievd from AP while STA is sleeping
5969          *
5970          * (see enum wmi_sta_ps_param_rx_wake_policy)
5971          */
5972         WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5973
5974         /*
5975          * The STA will go active after this many TX
5976          *
5977          * (see enum wmi_sta_ps_param_tx_wake_threshold)
5978          */
5979         WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5980
5981         /*
5982          * Number of PS-Poll to send before STA wakes up
5983          *
5984          * (see enum wmi_sta_ps_param_pspoll_count)
5985          *
5986          */
5987         WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5988
5989         /*
5990          * TX/RX inactivity time in msec before going to sleep.
5991          *
5992          * The power save SM will monitor tx/rx activity on the VDEV, if no
5993          * activity for the specified msec of the parameter the Power save
5994          * SM will go to sleep.
5995          */
5996         WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5997
5998         /*
5999          * Set uapsd configuration.
6000          *
6001          * (see enum wmi_sta_ps_param_uapsd)
6002          */
6003         WMI_STA_PS_PARAM_UAPSD = 4,
6004 };
6005
6006 struct wmi_sta_powersave_param_cmd {
6007         __le32 vdev_id;
6008         __le32 param_id; /* %WMI_STA_PS_PARAM_ */
6009         __le32 param_value;
6010 } __packed;
6011
6012 /* No MIMO power save */
6013 #define WMI_STA_MIMO_PS_MODE_DISABLE
6014 /* mimo powersave mode static*/
6015 #define WMI_STA_MIMO_PS_MODE_STATIC
6016 /* mimo powersave mode dynamic */
6017 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
6018
6019 struct wmi_sta_mimo_ps_mode_cmd {
6020         /* unique id identifying the VDEV, generated by the caller */
6021         __le32 vdev_id;
6022         /* mimo powersave mode as defined above */
6023         __le32 mimo_pwrsave_mode;
6024 } __packed;
6025
6026 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
6027 enum wmi_ap_ps_param_uapsd {
6028         WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
6029         WMI_AP_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
6030         WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
6031         WMI_AP_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
6032         WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
6033         WMI_AP_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
6034         WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
6035         WMI_AP_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
6036 };
6037
6038 /* U-APSD maximum service period of peer station */
6039 enum wmi_ap_ps_peer_param_max_sp {
6040         WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
6041         WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
6042         WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
6043         WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
6044         MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
6045 };
6046
6047 /*
6048  * AP power save parameter
6049  * Set a power save specific parameter for a peer station
6050  */
6051 enum wmi_ap_ps_peer_param {
6052         /* Set uapsd configuration for a given peer.
6053          *
6054          * Include the delivery and trigger enabled state for every AC.
6055          * The host  MLME needs to set this based on AP capability and stations
6056          * request Set in the association request  received from the station.
6057          *
6058          * Lower 8 bits of the value specify the UAPSD configuration.
6059          *
6060          * (see enum wmi_ap_ps_param_uapsd)
6061          * The default value is 0.
6062          */
6063         WMI_AP_PS_PEER_PARAM_UAPSD = 0,
6064
6065         /*
6066          * Set the service period for a UAPSD capable station
6067          *
6068          * The service period from wme ie in the (re)assoc request frame.
6069          *
6070          * (see enum wmi_ap_ps_peer_param_max_sp)
6071          */
6072         WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
6073
6074         /* Time in seconds for aging out buffered frames for STA in PS */
6075         WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
6076 };
6077
6078 struct wmi_ap_ps_peer_cmd {
6079         /* unique id identifying the VDEV, generated by the caller */
6080         __le32 vdev_id;
6081
6082         /* peer MAC address */
6083         struct wmi_mac_addr peer_macaddr;
6084
6085         /* AP powersave param (see enum wmi_ap_ps_peer_param) */
6086         __le32 param_id;
6087
6088         /* AP powersave param value */
6089         __le32 param_value;
6090 } __packed;
6091
6092 /* 128 clients = 4 words */
6093 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
6094
6095 struct wmi_tim_info {
6096         __le32 tim_len;
6097         __le32 tim_mcast;
6098         __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
6099         __le32 tim_changed;
6100         __le32 tim_num_ps_pending;
6101 } __packed;
6102
6103 struct wmi_tim_info_arg {
6104         __le32 tim_len;
6105         __le32 tim_mcast;
6106         const __le32 *tim_bitmap;
6107         __le32 tim_changed;
6108         __le32 tim_num_ps_pending;
6109 } __packed;
6110
6111 /* Maximum number of NOA Descriptors supported */
6112 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
6113 #define WMI_P2P_OPPPS_ENABLE_BIT        BIT(0)
6114 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET   1
6115 #define WMI_P2P_NOA_CHANGED_BIT BIT(0)
6116
6117 struct wmi_p2p_noa_info {
6118         /* Bit 0 - Flag to indicate an update in NOA schedule
6119          * Bits 7-1 - Reserved
6120          */
6121         u8 changed;
6122         /* NOA index */
6123         u8 index;
6124         /* Bit 0 - Opp PS state of the AP
6125          * Bits 1-7 - Ctwindow in TUs
6126          */
6127         u8 ctwindow_oppps;
6128         /* Number of NOA descriptors */
6129         u8 num_descriptors;
6130
6131         struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
6132 } __packed;
6133
6134 struct wmi_bcn_info {
6135         struct wmi_tim_info tim_info;
6136         struct wmi_p2p_noa_info p2p_noa_info;
6137 } __packed;
6138
6139 struct wmi_host_swba_event {
6140         __le32 vdev_map;
6141         struct wmi_bcn_info bcn_info[];
6142 } __packed;
6143
6144 struct wmi_10_2_4_bcn_info {
6145         struct wmi_tim_info tim_info;
6146         /* The 10.2.4 FW doesn't have p2p NOA info */
6147 } __packed;
6148
6149 struct wmi_10_2_4_host_swba_event {
6150         __le32 vdev_map;
6151         struct wmi_10_2_4_bcn_info bcn_info[];
6152 } __packed;
6153
6154 /* 16 words = 512 client + 1 word = for guard */
6155 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
6156
6157 struct wmi_10_4_tim_info {
6158         __le32 tim_len;
6159         __le32 tim_mcast;
6160         __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
6161         __le32 tim_changed;
6162         __le32 tim_num_ps_pending;
6163 } __packed;
6164
6165 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
6166
6167 struct wmi_10_4_p2p_noa_info {
6168         /* Bit 0 - Flag to indicate an update in NOA schedule
6169          * Bits 7-1 - Reserved
6170          */
6171         u8 changed;
6172         /* NOA index */
6173         u8 index;
6174         /* Bit 0 - Opp PS state of the AP
6175          * Bits 1-7 - Ctwindow in TUs
6176          */
6177         u8 ctwindow_oppps;
6178         /* Number of NOA descriptors */
6179         u8 num_descriptors;
6180
6181         struct wmi_p2p_noa_descriptor
6182                 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
6183 } __packed;
6184
6185 struct wmi_10_4_bcn_info {
6186         struct wmi_10_4_tim_info tim_info;
6187         struct wmi_10_4_p2p_noa_info p2p_noa_info;
6188 } __packed;
6189
6190 struct wmi_10_4_host_swba_event {
6191         __le32 vdev_map;
6192         struct wmi_10_4_bcn_info bcn_info[];
6193 } __packed;
6194
6195 #define WMI_MAX_AP_VDEV 16
6196
6197 struct wmi_tbtt_offset_event {
6198         __le32 vdev_map;
6199         __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
6200 } __packed;
6201
6202 struct wmi_peer_create_cmd {
6203         __le32 vdev_id;
6204         struct wmi_mac_addr peer_macaddr;
6205         __le32 peer_type;
6206 } __packed;
6207
6208 enum wmi_peer_type {
6209         WMI_PEER_TYPE_DEFAULT = 0,
6210         WMI_PEER_TYPE_BSS = 1,
6211         WMI_PEER_TYPE_TDLS = 2,
6212 };
6213
6214 struct wmi_peer_delete_cmd {
6215         __le32 vdev_id;
6216         struct wmi_mac_addr peer_macaddr;
6217 } __packed;
6218
6219 struct wmi_peer_flush_tids_cmd {
6220         __le32 vdev_id;
6221         struct wmi_mac_addr peer_macaddr;
6222         __le32 peer_tid_bitmap;
6223 } __packed;
6224
6225 struct wmi_fixed_rate {
6226         /*
6227          * rate mode . 0: disable fixed rate (auto rate)
6228          *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps
6229          *   2: ht20 11n rate  specified as mcs index
6230          *   3: ht40 11n rate  specified as mcs index
6231          */
6232         __le32  rate_mode;
6233         /*
6234          * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6235          * and series 3 is stored at byte 3 (MSB)
6236          */
6237         __le32  rate_series;
6238         /*
6239          * 4 retry counts for 4 rate series. retry count for rate 0 is stored
6240          * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6241          * (MSB)
6242          */
6243         __le32  rate_retries;
6244 } __packed;
6245
6246 struct wmi_peer_fixed_rate_cmd {
6247         /* unique id identifying the VDEV, generated by the caller */
6248         __le32 vdev_id;
6249         /* peer MAC address */
6250         struct wmi_mac_addr peer_macaddr;
6251         /* fixed rate */
6252         struct wmi_fixed_rate peer_fixed_rate;
6253 } __packed;
6254
6255 #define WMI_MGMT_TID    17
6256
6257 struct wmi_addba_clear_resp_cmd {
6258         /* unique id identifying the VDEV, generated by the caller */
6259         __le32 vdev_id;
6260         /* peer MAC address */
6261         struct wmi_mac_addr peer_macaddr;
6262 } __packed;
6263
6264 struct wmi_addba_send_cmd {
6265         /* unique id identifying the VDEV, generated by the caller */
6266         __le32 vdev_id;
6267         /* peer MAC address */
6268         struct wmi_mac_addr peer_macaddr;
6269         /* Tid number */
6270         __le32 tid;
6271         /* Buffer/Window size*/
6272         __le32 buffersize;
6273 } __packed;
6274
6275 struct wmi_delba_send_cmd {
6276         /* unique id identifying the VDEV, generated by the caller */
6277         __le32 vdev_id;
6278         /* peer MAC address */
6279         struct wmi_mac_addr peer_macaddr;
6280         /* Tid number */
6281         __le32 tid;
6282         /* Is Initiator */
6283         __le32 initiator;
6284         /* Reason code */
6285         __le32 reasoncode;
6286 } __packed;
6287
6288 struct wmi_addba_setresponse_cmd {
6289         /* unique id identifying the vdev, generated by the caller */
6290         __le32 vdev_id;
6291         /* peer mac address */
6292         struct wmi_mac_addr peer_macaddr;
6293         /* Tid number */
6294         __le32 tid;
6295         /* status code */
6296         __le32 statuscode;
6297 } __packed;
6298
6299 struct wmi_send_singleamsdu_cmd {
6300         /* unique id identifying the vdev, generated by the caller */
6301         __le32 vdev_id;
6302         /* peer mac address */
6303         struct wmi_mac_addr peer_macaddr;
6304         /* Tid number */
6305         __le32 tid;
6306 } __packed;
6307
6308 enum wmi_peer_smps_state {
6309         WMI_PEER_SMPS_PS_NONE = 0x0,
6310         WMI_PEER_SMPS_STATIC  = 0x1,
6311         WMI_PEER_SMPS_DYNAMIC = 0x2
6312 };
6313
6314 enum wmi_peer_chwidth {
6315         WMI_PEER_CHWIDTH_20MHZ = 0,
6316         WMI_PEER_CHWIDTH_40MHZ = 1,
6317         WMI_PEER_CHWIDTH_80MHZ = 2,
6318         WMI_PEER_CHWIDTH_160MHZ = 3,
6319 };
6320
6321 enum wmi_peer_param {
6322         WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
6323         WMI_PEER_AMPDU      = 0x2,
6324         WMI_PEER_AUTHORIZE  = 0x3,
6325         WMI_PEER_CHAN_WIDTH = 0x4,
6326         WMI_PEER_NSS        = 0x5,
6327         WMI_PEER_USE_4ADDR  = 0x6,
6328         WMI_PEER_USE_FIXED_PWR = 0x8,
6329         WMI_PEER_PARAM_FIXED_RATE = 0x9,
6330         WMI_PEER_DEBUG      = 0xa,
6331         WMI_PEER_PHYMODE    = 0xd,
6332         WMI_PEER_DUMMY_VAR  = 0xff, /* dummy parameter for STA PS workaround */
6333 };
6334
6335 struct wmi_peer_set_param_cmd {
6336         __le32 vdev_id;
6337         struct wmi_mac_addr peer_macaddr;
6338         __le32 param_id;
6339         __le32 param_value;
6340 } __packed;
6341
6342 #define MAX_SUPPORTED_RATES 128
6343
6344 struct wmi_rate_set {
6345         /* total number of rates */
6346         __le32 num_rates;
6347         /*
6348          * rates (each 8bit value) packed into a 32 bit word.
6349          * the rates are filled from least significant byte to most
6350          * significant byte.
6351          */
6352         __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
6353 } __packed;
6354
6355 struct wmi_rate_set_arg {
6356         unsigned int num_rates;
6357         u8 rates[MAX_SUPPORTED_RATES];
6358 };
6359
6360 /*
6361  * NOTE: It would bea good idea to represent the Tx MCS
6362  * info in one word and Rx in another word. This is split
6363  * into multiple words for convenience
6364  */
6365 struct wmi_vht_rate_set {
6366         __le32 rx_max_rate; /* Max Rx data rate */
6367         __le32 rx_mcs_set;  /* Negotiated RX VHT rates */
6368         __le32 tx_max_rate; /* Max Tx data rate */
6369         __le32 tx_mcs_set;  /* Negotiated TX VHT rates */
6370 } __packed;
6371
6372 struct wmi_vht_rate_set_arg {
6373         u32 rx_max_rate;
6374         u32 rx_mcs_set;
6375         u32 tx_max_rate;
6376         u32 tx_mcs_set;
6377 };
6378
6379 struct wmi_peer_set_rates_cmd {
6380         /* peer MAC address */
6381         struct wmi_mac_addr peer_macaddr;
6382         /* legacy rate set */
6383         struct wmi_rate_set peer_legacy_rates;
6384         /* ht rate set */
6385         struct wmi_rate_set peer_ht_rates;
6386 } __packed;
6387
6388 struct wmi_peer_set_q_empty_callback_cmd {
6389         /* unique id identifying the VDEV, generated by the caller */
6390         __le32 vdev_id;
6391         /* peer MAC address */
6392         struct wmi_mac_addr peer_macaddr;
6393         __le32 callback_enable;
6394 } __packed;
6395
6396 struct wmi_peer_flags_map {
6397         u32 auth;
6398         u32 qos;
6399         u32 need_ptk_4_way;
6400         u32 need_gtk_2_way;
6401         u32 apsd;
6402         u32 ht;
6403         u32 bw40;
6404         u32 stbc;
6405         u32 ldbc;
6406         u32 dyn_mimops;
6407         u32 static_mimops;
6408         u32 spatial_mux;
6409         u32 vht;
6410         u32 bw80;
6411         u32 vht_2g;
6412         u32 pmf;
6413         u32 bw160;
6414 };
6415
6416 enum wmi_peer_flags {
6417         WMI_PEER_AUTH = 0x00000001,
6418         WMI_PEER_QOS = 0x00000002,
6419         WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
6420         WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
6421         WMI_PEER_APSD = 0x00000800,
6422         WMI_PEER_HT = 0x00001000,
6423         WMI_PEER_40MHZ = 0x00002000,
6424         WMI_PEER_STBC = 0x00008000,
6425         WMI_PEER_LDPC = 0x00010000,
6426         WMI_PEER_DYN_MIMOPS = 0x00020000,
6427         WMI_PEER_STATIC_MIMOPS = 0x00040000,
6428         WMI_PEER_SPATIAL_MUX = 0x00200000,
6429         WMI_PEER_VHT = 0x02000000,
6430         WMI_PEER_80MHZ = 0x04000000,
6431         WMI_PEER_VHT_2G = 0x08000000,
6432         WMI_PEER_PMF = 0x10000000,
6433         WMI_PEER_160MHZ = 0x20000000
6434 };
6435
6436 enum wmi_10x_peer_flags {
6437         WMI_10X_PEER_AUTH = 0x00000001,
6438         WMI_10X_PEER_QOS = 0x00000002,
6439         WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
6440         WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
6441         WMI_10X_PEER_APSD = 0x00000800,
6442         WMI_10X_PEER_HT = 0x00001000,
6443         WMI_10X_PEER_40MHZ = 0x00002000,
6444         WMI_10X_PEER_STBC = 0x00008000,
6445         WMI_10X_PEER_LDPC = 0x00010000,
6446         WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
6447         WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
6448         WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
6449         WMI_10X_PEER_VHT = 0x02000000,
6450         WMI_10X_PEER_80MHZ = 0x04000000,
6451         WMI_10X_PEER_160MHZ = 0x20000000
6452 };
6453
6454 enum wmi_10_2_peer_flags {
6455         WMI_10_2_PEER_AUTH = 0x00000001,
6456         WMI_10_2_PEER_QOS = 0x00000002,
6457         WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
6458         WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
6459         WMI_10_2_PEER_APSD = 0x00000800,
6460         WMI_10_2_PEER_HT = 0x00001000,
6461         WMI_10_2_PEER_40MHZ = 0x00002000,
6462         WMI_10_2_PEER_STBC = 0x00008000,
6463         WMI_10_2_PEER_LDPC = 0x00010000,
6464         WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
6465         WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
6466         WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
6467         WMI_10_2_PEER_VHT = 0x02000000,
6468         WMI_10_2_PEER_80MHZ = 0x04000000,
6469         WMI_10_2_PEER_VHT_2G = 0x08000000,
6470         WMI_10_2_PEER_PMF = 0x10000000,
6471         WMI_10_2_PEER_160MHZ = 0x20000000
6472 };
6473
6474 /*
6475  * Peer rate capabilities.
6476  *
6477  * This is of interest to the ratecontrol
6478  * module which resides in the firmware. The bit definitions are
6479  * consistent with that defined in if_athrate.c.
6480  */
6481 #define WMI_RC_DS_FLAG          0x01
6482 #define WMI_RC_CW40_FLAG        0x02
6483 #define WMI_RC_SGI_FLAG         0x04
6484 #define WMI_RC_HT_FLAG          0x08
6485 #define WMI_RC_RTSCTS_FLAG      0x10
6486 #define WMI_RC_TX_STBC_FLAG     0x20
6487 #define WMI_RC_RX_STBC_FLAG     0xC0
6488 #define WMI_RC_RX_STBC_FLAG_S   6
6489 #define WMI_RC_WEP_TKIP_FLAG    0x100
6490 #define WMI_RC_TS_FLAG          0x200
6491 #define WMI_RC_UAPSD_FLAG       0x400
6492
6493 /* Maximum listen interval supported by hw in units of beacon interval */
6494 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
6495
6496 struct wmi_common_peer_assoc_complete_cmd {
6497         struct wmi_mac_addr peer_macaddr;
6498         __le32 vdev_id;
6499         __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
6500         __le32 peer_associd; /* 16 LSBs */
6501         __le32 peer_flags;
6502         __le32 peer_caps; /* 16 LSBs */
6503         __le32 peer_listen_intval;
6504         __le32 peer_ht_caps;
6505         __le32 peer_max_mpdu;
6506         __le32 peer_mpdu_density; /* 0..16 */
6507         __le32 peer_rate_caps;
6508         struct wmi_rate_set peer_legacy_rates;
6509         struct wmi_rate_set peer_ht_rates;
6510         __le32 peer_nss; /* num of spatial streams */
6511         __le32 peer_vht_caps;
6512         __le32 peer_phymode;
6513         struct wmi_vht_rate_set peer_vht_rates;
6514 };
6515
6516 struct wmi_main_peer_assoc_complete_cmd {
6517         struct wmi_common_peer_assoc_complete_cmd cmd;
6518
6519         /* HT Operation Element of the peer. Five bytes packed in 2
6520          *  INT32 array and filled from lsb to msb.
6521          */
6522         __le32 peer_ht_info[2];
6523 } __packed;
6524
6525 struct wmi_10_1_peer_assoc_complete_cmd {
6526         struct wmi_common_peer_assoc_complete_cmd cmd;
6527 } __packed;
6528
6529 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
6530 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
6531 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
6532 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
6533
6534 struct wmi_10_2_peer_assoc_complete_cmd {
6535         struct wmi_common_peer_assoc_complete_cmd cmd;
6536         __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
6537 } __packed;
6538
6539 /* NSS Mapping to FW */
6540 #define WMI_PEER_NSS_MAP_ENABLE BIT(31)
6541 #define WMI_PEER_NSS_160MHZ_MASK        GENMASK(2, 0)
6542 #define WMI_PEER_NSS_80_80MHZ_MASK      GENMASK(5, 3)
6543
6544 struct wmi_10_4_peer_assoc_complete_cmd {
6545         struct wmi_10_2_peer_assoc_complete_cmd cmd;
6546         __le32 peer_bw_rxnss_override;
6547 } __packed;
6548
6549 struct wmi_peer_assoc_complete_arg {
6550         u8 addr[ETH_ALEN];
6551         u32 vdev_id;
6552         bool peer_reassoc;
6553         u16 peer_aid;
6554         u32 peer_flags; /* see %WMI_PEER_ */
6555         u16 peer_caps;
6556         u32 peer_listen_intval;
6557         u32 peer_ht_caps;
6558         u32 peer_max_mpdu;
6559         u32 peer_mpdu_density; /* 0..16 */
6560         u32 peer_rate_caps; /* see %WMI_RC_ */
6561         struct wmi_rate_set_arg peer_legacy_rates;
6562         struct wmi_rate_set_arg peer_ht_rates;
6563         u32 peer_num_spatial_streams;
6564         u32 peer_vht_caps;
6565         enum wmi_phy_mode peer_phymode;
6566         struct wmi_vht_rate_set_arg peer_vht_rates;
6567         u32 peer_bw_rxnss_override;
6568 };
6569
6570 struct wmi_peer_add_wds_entry_cmd {
6571         /* peer MAC address */
6572         struct wmi_mac_addr peer_macaddr;
6573         /* wds MAC addr */
6574         struct wmi_mac_addr wds_macaddr;
6575 } __packed;
6576
6577 struct wmi_peer_remove_wds_entry_cmd {
6578         /* wds MAC addr */
6579         struct wmi_mac_addr wds_macaddr;
6580 } __packed;
6581
6582 struct wmi_peer_q_empty_callback_event {
6583         /* peer MAC address */
6584         struct wmi_mac_addr peer_macaddr;
6585 } __packed;
6586
6587 /*
6588  * Channel info WMI event
6589  */
6590 struct wmi_chan_info_event {
6591         __le32 err_code;
6592         __le32 freq;
6593         __le32 cmd_flags;
6594         __le32 noise_floor;
6595         __le32 rx_clear_count;
6596         __le32 cycle_count;
6597 } __packed;
6598
6599 struct wmi_10_4_chan_info_event {
6600         __le32 err_code;
6601         __le32 freq;
6602         __le32 cmd_flags;
6603         __le32 noise_floor;
6604         __le32 rx_clear_count;
6605         __le32 cycle_count;
6606         __le32 chan_tx_pwr_range;
6607         __le32 chan_tx_pwr_tp;
6608         __le32 rx_frame_count;
6609 } __packed;
6610
6611 struct wmi_peer_sta_kickout_event {
6612         struct wmi_mac_addr peer_macaddr;
6613 } __packed;
6614
6615 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6616 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6617
6618 /* Beacon filter wmi command info */
6619 #define BCN_FLT_MAX_SUPPORTED_IES       256
6620 #define BCN_FLT_MAX_ELEMS_IE_LIST       (BCN_FLT_MAX_SUPPORTED_IES / 32)
6621
6622 struct bss_bcn_stats {
6623         __le32 vdev_id;
6624         __le32 bss_bcnsdropped;
6625         __le32 bss_bcnsdelivered;
6626 } __packed;
6627
6628 struct bcn_filter_stats {
6629         __le32 bcns_dropped;
6630         __le32 bcns_delivered;
6631         __le32 activefilters;
6632         struct bss_bcn_stats bss_stats;
6633 } __packed;
6634
6635 struct wmi_add_bcn_filter_cmd {
6636         u32 vdev_id;
6637         u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
6638 } __packed;
6639
6640 enum wmi_sta_keepalive_method {
6641         WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
6642         WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
6643 };
6644
6645 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6646
6647 /* Firmware crashes if keepalive interval exceeds this limit */
6648 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6649
6650 /* note: ip4 addresses are in network byte order, i.e. big endian */
6651 struct wmi_sta_keepalive_arp_resp {
6652         __be32 src_ip4_addr;
6653         __be32 dest_ip4_addr;
6654         struct wmi_mac_addr dest_mac_addr;
6655 } __packed;
6656
6657 struct wmi_sta_keepalive_cmd {
6658         __le32 vdev_id;
6659         __le32 enabled;
6660         __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
6661         __le32 interval; /* in seconds */
6662         struct wmi_sta_keepalive_arp_resp arp_resp;
6663 } __packed;
6664
6665 struct wmi_sta_keepalive_arg {
6666         u32 vdev_id;
6667         u32 enabled;
6668         u32 method;
6669         u32 interval;
6670         __be32 src_ip4_addr;
6671         __be32 dest_ip4_addr;
6672         const u8 dest_mac_addr[ETH_ALEN];
6673 };
6674
6675 enum wmi_force_fw_hang_type {
6676         WMI_FORCE_FW_HANG_ASSERT = 1,
6677         WMI_FORCE_FW_HANG_NO_DETECT,
6678         WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6679         WMI_FORCE_FW_HANG_EMPTY_POINT,
6680         WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6681         WMI_FORCE_FW_HANG_INFINITE_LOOP,
6682 };
6683
6684 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6685
6686 struct wmi_force_fw_hang_cmd {
6687         __le32 type;
6688         __le32 delay_ms;
6689 } __packed;
6690
6691 enum wmi_pdev_reset_mode_type {
6692         WMI_RST_MODE_TX_FLUSH = 1,
6693         WMI_RST_MODE_WARM_RESET,
6694         WMI_RST_MODE_COLD_RESET,
6695         WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
6696         WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
6697         WMI_RST_MODE_MAX,
6698 };
6699
6700 enum ath10k_dbglog_level {
6701         ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6702         ATH10K_DBGLOG_LEVEL_INFO = 1,
6703         ATH10K_DBGLOG_LEVEL_WARN = 2,
6704         ATH10K_DBGLOG_LEVEL_ERR = 3,
6705 };
6706
6707 /* VAP ids to enable dbglog */
6708 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB           0
6709 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK          0x0000ffff
6710
6711 /* to enable dbglog in the firmware */
6712 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB  16
6713 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6714
6715 /* timestamp resolution */
6716 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB        17
6717 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK       0x000E0000
6718
6719 /* number of queued messages before sending them to the host */
6720 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB       20
6721 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK      0x0ff00000
6722
6723 /*
6724  * Log levels to enable. This defines the minimum level to enable, this is
6725  * not a bitmask. See enum ath10k_dbglog_level for the values.
6726  */
6727 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB           28
6728 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK          0x70000000
6729
6730 /*
6731  * Note: this is a cleaned up version of a struct firmware uses. For
6732  * example, config_valid was hidden inside an array.
6733  */
6734 struct wmi_dbglog_cfg_cmd {
6735         /* bitmask to hold mod id config*/
6736         __le32 module_enable;
6737
6738         /* see ATH10K_DBGLOG_CFG_ */
6739         __le32 config_enable;
6740
6741         /* mask of module id bits to be changed */
6742         __le32 module_valid;
6743
6744         /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6745         __le32 config_valid;
6746 } __packed;
6747
6748 struct wmi_10_4_dbglog_cfg_cmd {
6749         /* bitmask to hold mod id config*/
6750         __le64 module_enable;
6751
6752         /* see ATH10K_DBGLOG_CFG_ */
6753         __le32 config_enable;
6754
6755         /* mask of module id bits to be changed */
6756         __le64 module_valid;
6757
6758         /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6759         __le32 config_valid;
6760 } __packed;
6761
6762 enum wmi_roam_reason {
6763         WMI_ROAM_REASON_BETTER_AP = 1,
6764         WMI_ROAM_REASON_BEACON_MISS = 2,
6765         WMI_ROAM_REASON_LOW_RSSI = 3,
6766         WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6767         WMI_ROAM_REASON_HO_FAILED = 5,
6768
6769         /* keep last */
6770         WMI_ROAM_REASON_MAX,
6771 };
6772
6773 struct wmi_roam_ev {
6774         __le32 vdev_id;
6775         __le32 reason;
6776 } __packed;
6777
6778 #define ATH10K_FRAGMT_THRESHOLD_MIN     540
6779 #define ATH10K_FRAGMT_THRESHOLD_MAX     2346
6780
6781 #define WMI_MAX_EVENT 0x1000
6782 /* Maximum number of pending TXed WMI packets */
6783 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6784
6785 /* By default disable power save for IBSS */
6786 #define ATH10K_DEFAULT_ATIM 0
6787
6788 #define WMI_MAX_MEM_REQS 16
6789
6790 struct wmi_scan_ev_arg {
6791         __le32 event_type; /* %WMI_SCAN_EVENT_ */
6792         __le32 reason; /* %WMI_SCAN_REASON_ */
6793         __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6794         __le32 scan_req_id;
6795         __le32 scan_id;
6796         __le32 vdev_id;
6797 };
6798
6799 struct mgmt_tx_compl_params {
6800         u32 desc_id;
6801         u32 status;
6802         u32 ppdu_id;
6803         int ack_rssi;
6804 };
6805
6806 struct wmi_tlv_mgmt_tx_compl_ev_arg {
6807         __le32 desc_id;
6808         __le32 status;
6809         __le32 pdev_id;
6810         __le32 ppdu_id;
6811         __le32 ack_rssi;
6812 };
6813
6814 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
6815         __le32 num_reports;
6816         const __le32 *desc_ids;
6817         const __le32 *status;
6818         const __le32 *ppdu_ids;
6819         const __le32 *ack_rssi;
6820 };
6821
6822 struct wmi_peer_delete_resp_ev_arg {
6823         __le32 vdev_id;
6824         struct wmi_mac_addr peer_addr;
6825 };
6826
6827 #define WMI_MGMT_RX_NUM_RSSI 4
6828 struct wmi_mgmt_rx_ev_arg {
6829         __le32 channel;
6830         __le32 snr;
6831         __le32 rate;
6832         __le32 phy_mode;
6833         __le32 buf_len;
6834         __le32 status; /* %WMI_RX_STATUS_ */
6835         struct wmi_mgmt_rx_ext_info ext_info;
6836         __le32 rssi[WMI_MGMT_RX_NUM_RSSI];
6837 };
6838
6839 struct wmi_ch_info_ev_arg {
6840         __le32 err_code;
6841         __le32 freq;
6842         __le32 cmd_flags;
6843         __le32 noise_floor;
6844         __le32 rx_clear_count;
6845         __le32 cycle_count;
6846         __le32 chan_tx_pwr_range;
6847         __le32 chan_tx_pwr_tp;
6848         __le32 rx_frame_count;
6849         __le32 my_bss_rx_cycle_count;
6850         __le32 rx_11b_mode_data_duration;
6851         __le32 tx_frame_cnt;
6852         __le32 mac_clk_mhz;
6853 };
6854
6855 /* From 10.4 firmware, not sure all have the same values. */
6856 enum wmi_vdev_start_status {
6857         WMI_VDEV_START_OK = 0,
6858         WMI_VDEV_START_CHAN_INVALID,
6859 };
6860
6861 struct wmi_vdev_start_ev_arg {
6862         __le32 vdev_id;
6863         __le32 req_id;
6864         __le32 resp_type; /* %WMI_VDEV_RESP_ */
6865         __le32 status; /* See wmi_vdev_start_status enum above */
6866 };
6867
6868 struct wmi_peer_kick_ev_arg {
6869         const u8 *mac_addr;
6870 };
6871
6872 struct wmi_swba_ev_arg {
6873         __le32 vdev_map;
6874         struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6875         const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6876 };
6877
6878 struct wmi_phyerr_ev_arg {
6879         u32 tsf_timestamp;
6880         u16 freq1;
6881         u16 freq2;
6882         u8 rssi_combined;
6883         u8 chan_width_mhz;
6884         u8 phy_err_code;
6885         u16 nf_chains[4];
6886         u32 buf_len;
6887         const u8 *buf;
6888         u8 hdr_len;
6889 };
6890
6891 struct wmi_phyerr_hdr_arg {
6892         u32 num_phyerrs;
6893         u32 tsf_l32;
6894         u32 tsf_u32;
6895         u32 buf_len;
6896         const void *phyerrs;
6897 };
6898
6899 struct wmi_dfs_status_ev_arg {
6900         u32 status;
6901 };
6902
6903 struct wmi_svc_rdy_ev_arg {
6904         __le32 min_tx_power;
6905         __le32 max_tx_power;
6906         __le32 ht_cap;
6907         __le32 vht_cap;
6908         __le32 vht_supp_mcs;
6909         __le32 sw_ver0;
6910         __le32 sw_ver1;
6911         __le32 fw_build;
6912         __le32 phy_capab;
6913         __le32 num_rf_chains;
6914         __le32 eeprom_rd;
6915         __le32 num_mem_reqs;
6916         __le32 low_2ghz_chan;
6917         __le32 high_2ghz_chan;
6918         __le32 low_5ghz_chan;
6919         __le32 high_5ghz_chan;
6920         __le32 sys_cap_info;
6921         const __le32 *service_map;
6922         size_t service_map_len;
6923         const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6924 };
6925
6926 struct wmi_svc_avail_ev_arg {
6927         bool service_map_ext_valid;
6928         __le32 service_map_ext_len;
6929         const __le32 *service_map_ext;
6930 };
6931
6932 struct wmi_rdy_ev_arg {
6933         __le32 sw_version;
6934         __le32 abi_version;
6935         __le32 status;
6936         const u8 *mac_addr;
6937 };
6938
6939 struct wmi_roam_ev_arg {
6940         __le32 vdev_id;
6941         __le32 reason;
6942         __le32 rssi;
6943 };
6944
6945 struct wmi_echo_ev_arg {
6946         __le32 value;
6947 };
6948
6949 struct wmi_pdev_temperature_event {
6950         /* temperature value in Celcius degree */
6951         __le32 temperature;
6952 } __packed;
6953
6954 struct wmi_pdev_bss_chan_info_event {
6955         __le32 freq;
6956         __le32 noise_floor;
6957         __le64 cycle_busy;
6958         __le64 cycle_total;
6959         __le64 cycle_tx;
6960         __le64 cycle_rx;
6961         __le64 cycle_rx_bss;
6962         __le32 reserved;
6963 } __packed;
6964
6965 /* WOW structures */
6966 enum wmi_wow_wakeup_event {
6967         WOW_BMISS_EVENT = 0,
6968         WOW_BETTER_AP_EVENT,
6969         WOW_DEAUTH_RECVD_EVENT,
6970         WOW_MAGIC_PKT_RECVD_EVENT,
6971         WOW_GTK_ERR_EVENT,
6972         WOW_FOURWAY_HSHAKE_EVENT,
6973         WOW_EAPOL_RECVD_EVENT,
6974         WOW_NLO_DETECTED_EVENT,
6975         WOW_DISASSOC_RECVD_EVENT,
6976         WOW_PATTERN_MATCH_EVENT,
6977         WOW_CSA_IE_EVENT,
6978         WOW_PROBE_REQ_WPS_IE_EVENT,
6979         WOW_AUTH_REQ_EVENT,
6980         WOW_ASSOC_REQ_EVENT,
6981         WOW_HTT_EVENT,
6982         WOW_RA_MATCH_EVENT,
6983         WOW_HOST_AUTO_SHUTDOWN_EVENT,
6984         WOW_IOAC_MAGIC_EVENT,
6985         WOW_IOAC_SHORT_EVENT,
6986         WOW_IOAC_EXTEND_EVENT,
6987         WOW_IOAC_TIMER_EVENT,
6988         WOW_DFS_PHYERR_RADAR_EVENT,
6989         WOW_BEACON_EVENT,
6990         WOW_CLIENT_KICKOUT_EVENT,
6991         WOW_EVENT_MAX,
6992 };
6993
6994 #define C2S(x) case x: return #x
6995
6996 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6997 {
6998         switch (ev) {
6999         C2S(WOW_BMISS_EVENT);
7000         C2S(WOW_BETTER_AP_EVENT);
7001         C2S(WOW_DEAUTH_RECVD_EVENT);
7002         C2S(WOW_MAGIC_PKT_RECVD_EVENT);
7003         C2S(WOW_GTK_ERR_EVENT);
7004         C2S(WOW_FOURWAY_HSHAKE_EVENT);
7005         C2S(WOW_EAPOL_RECVD_EVENT);
7006         C2S(WOW_NLO_DETECTED_EVENT);
7007         C2S(WOW_DISASSOC_RECVD_EVENT);
7008         C2S(WOW_PATTERN_MATCH_EVENT);
7009         C2S(WOW_CSA_IE_EVENT);
7010         C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
7011         C2S(WOW_AUTH_REQ_EVENT);
7012         C2S(WOW_ASSOC_REQ_EVENT);
7013         C2S(WOW_HTT_EVENT);
7014         C2S(WOW_RA_MATCH_EVENT);
7015         C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
7016         C2S(WOW_IOAC_MAGIC_EVENT);
7017         C2S(WOW_IOAC_SHORT_EVENT);
7018         C2S(WOW_IOAC_EXTEND_EVENT);
7019         C2S(WOW_IOAC_TIMER_EVENT);
7020         C2S(WOW_DFS_PHYERR_RADAR_EVENT);
7021         C2S(WOW_BEACON_EVENT);
7022         C2S(WOW_CLIENT_KICKOUT_EVENT);
7023         C2S(WOW_EVENT_MAX);
7024         default:
7025                 return NULL;
7026         }
7027 }
7028
7029 enum wmi_wow_wake_reason {
7030         WOW_REASON_UNSPECIFIED = -1,
7031         WOW_REASON_NLOD = 0,
7032         WOW_REASON_AP_ASSOC_LOST,
7033         WOW_REASON_LOW_RSSI,
7034         WOW_REASON_DEAUTH_RECVD,
7035         WOW_REASON_DISASSOC_RECVD,
7036         WOW_REASON_GTK_HS_ERR,
7037         WOW_REASON_EAP_REQ,
7038         WOW_REASON_FOURWAY_HS_RECV,
7039         WOW_REASON_TIMER_INTR_RECV,
7040         WOW_REASON_PATTERN_MATCH_FOUND,
7041         WOW_REASON_RECV_MAGIC_PATTERN,
7042         WOW_REASON_P2P_DISC,
7043         WOW_REASON_WLAN_HB,
7044         WOW_REASON_CSA_EVENT,
7045         WOW_REASON_PROBE_REQ_WPS_IE_RECV,
7046         WOW_REASON_AUTH_REQ_RECV,
7047         WOW_REASON_ASSOC_REQ_RECV,
7048         WOW_REASON_HTT_EVENT,
7049         WOW_REASON_RA_MATCH,
7050         WOW_REASON_HOST_AUTO_SHUTDOWN,
7051         WOW_REASON_IOAC_MAGIC_EVENT,
7052         WOW_REASON_IOAC_SHORT_EVENT,
7053         WOW_REASON_IOAC_EXTEND_EVENT,
7054         WOW_REASON_IOAC_TIMER_EVENT,
7055         WOW_REASON_ROAM_HO,
7056         WOW_REASON_DFS_PHYERR_RADADR_EVENT,
7057         WOW_REASON_BEACON_RECV,
7058         WOW_REASON_CLIENT_KICKOUT_EVENT,
7059         WOW_REASON_DEBUG_TEST = 0xFF,
7060 };
7061
7062 static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
7063 {
7064         switch (reason) {
7065         C2S(WOW_REASON_UNSPECIFIED);
7066         C2S(WOW_REASON_NLOD);
7067         C2S(WOW_REASON_AP_ASSOC_LOST);
7068         C2S(WOW_REASON_LOW_RSSI);
7069         C2S(WOW_REASON_DEAUTH_RECVD);
7070         C2S(WOW_REASON_DISASSOC_RECVD);
7071         C2S(WOW_REASON_GTK_HS_ERR);
7072         C2S(WOW_REASON_EAP_REQ);
7073         C2S(WOW_REASON_FOURWAY_HS_RECV);
7074         C2S(WOW_REASON_TIMER_INTR_RECV);
7075         C2S(WOW_REASON_PATTERN_MATCH_FOUND);
7076         C2S(WOW_REASON_RECV_MAGIC_PATTERN);
7077         C2S(WOW_REASON_P2P_DISC);
7078         C2S(WOW_REASON_WLAN_HB);
7079         C2S(WOW_REASON_CSA_EVENT);
7080         C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
7081         C2S(WOW_REASON_AUTH_REQ_RECV);
7082         C2S(WOW_REASON_ASSOC_REQ_RECV);
7083         C2S(WOW_REASON_HTT_EVENT);
7084         C2S(WOW_REASON_RA_MATCH);
7085         C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
7086         C2S(WOW_REASON_IOAC_MAGIC_EVENT);
7087         C2S(WOW_REASON_IOAC_SHORT_EVENT);
7088         C2S(WOW_REASON_IOAC_EXTEND_EVENT);
7089         C2S(WOW_REASON_IOAC_TIMER_EVENT);
7090         C2S(WOW_REASON_ROAM_HO);
7091         C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
7092         C2S(WOW_REASON_BEACON_RECV);
7093         C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
7094         C2S(WOW_REASON_DEBUG_TEST);
7095         default:
7096                 return NULL;
7097         }
7098 }
7099
7100 #undef C2S
7101
7102 struct wmi_wow_ev_arg {
7103         u32 vdev_id;
7104         u32 flag;
7105         enum wmi_wow_wake_reason wake_reason;
7106         u32 data_len;
7107 };
7108
7109 #define WOW_MIN_PATTERN_SIZE    1
7110 #define WOW_MAX_PATTERN_SIZE    148
7111 #define WOW_MAX_PKT_OFFSET      128
7112 #define WOW_HDR_LEN     (sizeof(struct ieee80211_hdr_3addr) + \
7113         sizeof(struct rfc1042_hdr))
7114 #define WOW_MAX_REDUCE  (WOW_HDR_LEN - sizeof(struct ethhdr) - \
7115         offsetof(struct ieee80211_hdr_3addr, addr1))
7116
7117 enum wmi_tdls_state {
7118         WMI_TDLS_DISABLE,
7119         WMI_TDLS_ENABLE_PASSIVE,
7120         WMI_TDLS_ENABLE_ACTIVE,
7121         WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
7122 };
7123
7124 enum wmi_tdls_peer_state {
7125         WMI_TDLS_PEER_STATE_PEERING,
7126         WMI_TDLS_PEER_STATE_CONNECTED,
7127         WMI_TDLS_PEER_STATE_TEARDOWN,
7128 };
7129
7130 struct wmi_tdls_peer_update_cmd_arg {
7131         u32 vdev_id;
7132         enum wmi_tdls_peer_state peer_state;
7133         u8 addr[ETH_ALEN];
7134 };
7135
7136 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
7137
7138 #define WMI_TDLS_PEER_SP_MASK   0x60
7139 #define WMI_TDLS_PEER_SP_LSB    5
7140
7141 enum wmi_tdls_options {
7142         WMI_TDLS_OFFCHAN_EN = BIT(0),
7143         WMI_TDLS_BUFFER_STA_EN = BIT(1),
7144         WMI_TDLS_SLEEP_STA_EN = BIT(2),
7145 };
7146
7147 enum {
7148         WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
7149         WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
7150         WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
7151         WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
7152 };
7153
7154 struct wmi_tdls_peer_capab_arg {
7155         u8 peer_uapsd_queues;
7156         u8 peer_max_sp;
7157         u32 buff_sta_support;
7158         u32 off_chan_support;
7159         u32 peer_curr_operclass;
7160         u32 self_curr_operclass;
7161         u32 peer_chan_len;
7162         u32 peer_operclass_len;
7163         u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7164         u32 is_peer_responder;
7165         u32 pref_offchan_num;
7166         u32 pref_offchan_bw;
7167 };
7168
7169 struct wmi_10_4_tdls_set_state_cmd {
7170         __le32 vdev_id;
7171         __le32 state;
7172         __le32 notification_interval_ms;
7173         __le32 tx_discovery_threshold;
7174         __le32 tx_teardown_threshold;
7175         __le32 rssi_teardown_threshold;
7176         __le32 rssi_delta;
7177         __le32 tdls_options;
7178         __le32 tdls_peer_traffic_ind_window;
7179         __le32 tdls_peer_traffic_response_timeout_ms;
7180         __le32 tdls_puapsd_mask;
7181         __le32 tdls_puapsd_inactivity_time_ms;
7182         __le32 tdls_puapsd_rx_frame_threshold;
7183         __le32 teardown_notification_ms;
7184         __le32 tdls_peer_kickout_threshold;
7185 } __packed;
7186
7187 struct wmi_tdls_peer_capabilities {
7188         __le32 peer_qos;
7189         __le32 buff_sta_support;
7190         __le32 off_chan_support;
7191         __le32 peer_curr_operclass;
7192         __le32 self_curr_operclass;
7193         __le32 peer_chan_len;
7194         __le32 peer_operclass_len;
7195         u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7196         __le32 is_peer_responder;
7197         __le32 pref_offchan_num;
7198         __le32 pref_offchan_bw;
7199         struct wmi_channel peer_chan_list[1];
7200 } __packed;
7201
7202 struct wmi_10_4_tdls_peer_update_cmd {
7203         __le32 vdev_id;
7204         struct wmi_mac_addr peer_macaddr;
7205         __le32 peer_state;
7206         __le32 reserved[4];
7207         struct wmi_tdls_peer_capabilities peer_capab;
7208 } __packed;
7209
7210 enum wmi_tdls_peer_reason {
7211         WMI_TDLS_TEARDOWN_REASON_TX,
7212         WMI_TDLS_TEARDOWN_REASON_RSSI,
7213         WMI_TDLS_TEARDOWN_REASON_SCAN,
7214         WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
7215         WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
7216         WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
7217         WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
7218         WMI_TDLS_ENTER_BUF_STA,
7219         WMI_TDLS_EXIT_BUF_STA,
7220         WMI_TDLS_ENTER_BT_BUSY_MODE,
7221         WMI_TDLS_EXIT_BT_BUSY_MODE,
7222         WMI_TDLS_SCAN_STARTED_EVENT,
7223         WMI_TDLS_SCAN_COMPLETED_EVENT,
7224 };
7225
7226 enum wmi_tdls_peer_notification {
7227         WMI_TDLS_SHOULD_DISCOVER,
7228         WMI_TDLS_SHOULD_TEARDOWN,
7229         WMI_TDLS_PEER_DISCONNECTED,
7230         WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
7231 };
7232
7233 struct wmi_tdls_peer_event {
7234         struct wmi_mac_addr peer_macaddr;
7235         /* see enum wmi_tdls_peer_notification*/
7236         __le32 peer_status;
7237         /* see enum wmi_tdls_peer_reason */
7238         __le32 peer_reason;
7239         __le32 vdev_id;
7240 } __packed;
7241
7242 enum wmi_tid_aggr_control_conf {
7243         WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
7244         WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
7245         WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
7246 };
7247
7248 enum wmi_noack_tid_conf {
7249         WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
7250         WMI_PEER_TID_CONFIG_ACK,
7251         WMI_PEER_TID_CONFIG_NOACK,
7252 };
7253
7254 enum wmi_tid_rate_ctrl_conf {
7255         WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
7256         WMI_TID_CONFIG_RATE_CONTROL_AUTO,
7257         WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
7258         WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
7259         WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
7260 };
7261
7262 enum wmi_tid_rtscts_control_conf {
7263         WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
7264         WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
7265 };
7266
7267 enum wmi_ext_tid_config_map {
7268         WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
7269 };
7270
7271 struct wmi_per_peer_per_tid_cfg_arg {
7272         u32 vdev_id;
7273         struct wmi_mac_addr peer_macaddr;
7274         u32 tid;
7275         enum wmi_noack_tid_conf ack_policy;
7276         enum wmi_tid_aggr_control_conf aggr_control;
7277         u8 rate_ctrl;
7278         u32 retry_count;
7279         u32 rcode_flags;
7280         u32 ext_tid_cfg_bitmap;
7281         u32 rtscts_ctrl;
7282 };
7283
7284 struct wmi_peer_per_tid_cfg_cmd {
7285         __le32 vdev_id;
7286         struct wmi_mac_addr peer_macaddr;
7287         __le32 tid;
7288
7289         /* see enum wmi_noack_tid_conf */
7290         __le32 ack_policy;
7291
7292         /* see enum wmi_tid_aggr_control_conf */
7293         __le32 aggr_control;
7294
7295         /* see enum wmi_tid_rate_ctrl_conf */
7296         __le32 rate_control;
7297         __le32 rcode_flags;
7298         __le32 retry_count;
7299
7300         /* See enum wmi_ext_tid_config_map */
7301         __le32 ext_tid_cfg_bitmap;
7302
7303         /* see enum wmi_tid_rtscts_control_conf */
7304         __le32 rtscts_ctrl;
7305 } __packed;
7306
7307 enum wmi_txbf_conf {
7308         WMI_TXBF_CONF_UNSUPPORTED,
7309         WMI_TXBF_CONF_BEFORE_ASSOC,
7310         WMI_TXBF_CONF_AFTER_ASSOC,
7311 };
7312
7313 #define WMI_CCA_DETECT_LEVEL_AUTO       0
7314 #define WMI_CCA_DETECT_MARGIN_AUTO      0
7315
7316 struct wmi_pdev_set_adaptive_cca_params {
7317         __le32 enable;
7318         __le32 cca_detect_level;
7319         __le32 cca_detect_margin;
7320 } __packed;
7321
7322 #define WMI_PNO_MAX_SCHED_SCAN_PLANS      2
7323 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT   7200
7324 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
7325 #define WMI_PNO_MAX_NETW_CHANNELS         26
7326 #define WMI_PNO_MAX_NETW_CHANNELS_EX      60
7327 #define WMI_PNO_MAX_SUPP_NETWORKS         WLAN_SCAN_PARAMS_MAX_SSID
7328 #define WMI_PNO_MAX_IE_LENGTH             WLAN_SCAN_PARAMS_MAX_IE_LEN
7329
7330 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
7331 #define WMI_PNO_MAX_PB_REQ_SIZE    450
7332
7333 #define WMI_PNO_24G_DEFAULT_CH     1
7334 #define WMI_PNO_5G_DEFAULT_CH      36
7335
7336 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40
7337 #define WMI_PASSIVE_MAX_CHANNEL_TIME   110
7338
7339 /* SSID broadcast type */
7340 enum wmi_SSID_bcast_type {
7341         BCAST_UNKNOWN      = 0,
7342         BCAST_NORMAL       = 1,
7343         BCAST_HIDDEN       = 2,
7344 };
7345
7346 struct wmi_network_type {
7347         struct wmi_ssid ssid;
7348         u32 authentication;
7349         u32 encryption;
7350         u32 bcast_nw_type;
7351         u8 channel_count;
7352         u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
7353         s32 rssi_threshold;
7354 } __packed;
7355
7356 struct wmi_pno_scan_req {
7357         u8 enable;
7358         u8 vdev_id;
7359         u8 uc_networks_count;
7360         struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
7361         u32 fast_scan_period;
7362         u32 slow_scan_period;
7363         u8 fast_scan_max_cycles;
7364
7365         bool do_passive_scan;
7366
7367         u32 delay_start_time;
7368         u32 active_min_time;
7369         u32 active_max_time;
7370         u32 passive_min_time;
7371         u32 passive_max_time;
7372
7373         /* mac address randomization attributes */
7374         u32 enable_pno_scan_randomization;
7375         u8 mac_addr[ETH_ALEN];
7376         u8 mac_addr_mask[ETH_ALEN];
7377 } __packed;
7378
7379 enum wmi_host_platform_type {
7380         WMI_HOST_PLATFORM_HIGH_PERF,
7381         WMI_HOST_PLATFORM_LOW_PERF,
7382 };
7383
7384 enum wmi_bss_survey_req_type {
7385         WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
7386         WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
7387 };
7388
7389 struct wmi_pdev_chan_info_req_cmd {
7390         __le32 type;
7391         __le32 reserved;
7392 } __packed;
7393
7394 /* bb timing register configurations */
7395 struct wmi_bb_timing_cfg_arg {
7396         /* Tx_end to pa off timing */
7397         u32 bb_tx_timing;
7398
7399         /* Tx_end to external pa off timing */
7400         u32 bb_xpa_timing;
7401 };
7402
7403 struct wmi_pdev_bb_timing_cfg_cmd {
7404         /* Tx_end to pa off timing */
7405         __le32 bb_tx_timing;
7406
7407         /* Tx_end to external pa off timing */
7408         __le32 bb_xpa_timing;
7409 } __packed;
7410
7411 struct ath10k;
7412 struct ath10k_vif;
7413 struct ath10k_fw_stats_pdev;
7414 struct ath10k_fw_stats_peer;
7415 struct ath10k_fw_stats;
7416
7417 int ath10k_wmi_attach(struct ath10k *ar);
7418 void ath10k_wmi_detach(struct ath10k *ar);
7419 void ath10k_wmi_free_host_mem(struct ath10k *ar);
7420 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
7421 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
7422
7423 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7424 int ath10k_wmi_connect(struct ath10k *ar);
7425
7426 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
7427 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
7428                                u32 cmd_id);
7429 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
7430
7431 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
7432                                      struct ath10k_fw_stats_pdev *dst);
7433 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
7434                                    struct ath10k_fw_stats_pdev *dst);
7435 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
7436                                    struct ath10k_fw_stats_pdev *dst);
7437 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
7438                                       struct ath10k_fw_stats_pdev *dst);
7439 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
7440                                 struct ath10k_fw_stats_peer *dst);
7441 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
7442                                     struct wmi_host_mem_chunks *chunks);
7443 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
7444                                       const struct wmi_start_scan_arg *arg);
7445 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
7446                               const struct wmi_wmm_params_arg *arg);
7447 void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
7448                                 const struct wmi_channel_arg *arg);
7449 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
7450
7451 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
7452 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
7453 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
7454 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
7455 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
7456 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
7457 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
7458 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
7459 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
7460 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
7461 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
7462 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
7463 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
7464 void ath10k_wmi_event_dfs(struct ath10k *ar,
7465                           struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
7466 void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
7467                                     struct wmi_phyerr_ev_arg *phyerr,
7468                                     u64 tsf);
7469 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
7470 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
7471 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
7472 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
7473 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
7474 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
7475 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
7476                                              struct sk_buff *skb);
7477 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
7478                                              struct sk_buff *skb);
7479 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
7480 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
7481 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
7482 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
7483 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
7484 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
7485                                          struct sk_buff *skb);
7486 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
7487 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
7488 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
7489 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
7490                                                 struct sk_buff *skb);
7491 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
7492 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
7493 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
7494 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
7495 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
7496 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
7497 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
7498                                  int left_len, struct wmi_phyerr_ev_arg *arg);
7499 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
7500                                       struct ath10k_fw_stats *fw_stats,
7501                                       char *buf);
7502 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
7503                                      struct ath10k_fw_stats *fw_stats,
7504                                      char *buf);
7505 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
7506 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
7507 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
7508                                       struct ath10k_fw_stats *fw_stats,
7509                                       char *buf);
7510 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
7511                                    enum wmi_vdev_subtype subtype);
7512 int ath10k_wmi_barrier(struct ath10k *ar);
7513 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
7514                                          u32 num_tx_chain);
7515 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
7516
7517 #endif /* _WMI_H_ */