drivers/net/phy/phy.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /* Framework for configuring and reading PHY devices
   3  * Based on code in sungem_phy.c and gianfar_phy.c
   4  *
   5  * Author: Andy Fleming
   6  *
   7  * Copyright (c) 2004 Freescale Semiconductor, Inc.
   8  * Copyright (c) 2006, 2007  Maciej W. Rozycki
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/string.h>
  13 #include <linux/errno.h>
  14 #include <linux/unistd.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/delay.h>
  17 #include <linux/netdevice.h>
  18 #include <linux/netlink.h>
  19 #include <linux/etherdevice.h>
  20 #include <linux/skbuff.h>
  21 #include <linux/mm.h>
  22 #include <linux/module.h>
  23 #include <linux/mii.h>
  24 #include <linux/ethtool.h>
  25 #include <linux/ethtool_netlink.h>
  26 #include <linux/phy.h>
  27 #include <linux/phy_led_triggers.h>
  28 #include <linux/sfp.h>
  29 #include <linux/workqueue.h>
  30 #include <linux/mdio.h>
  31 #include <linux/io.h>
  32 #include <linux/uaccess.h>
  33 #include <linux/atomic.h>
  34 #include <linux/suspend.h>
  35 #include <net/netlink.h>
  36 #include <net/genetlink.h>
  37 #include <net/sock.h>
  38
  39 #define PHY_STATE_TIME  HZ
  40
  41 #define PHY_STATE_STR(_state)                   \
  42         case PHY_##_state:                      \
  43                 return __stringify(_state);     \
  44
  45 static const char *phy_state_to_str(enum phy_state st)
  46 {
  47         switch (st) {
  48         PHY_STATE_STR(DOWN)
  49         PHY_STATE_STR(READY)
  50         PHY_STATE_STR(UP)
  51         PHY_STATE_STR(RUNNING)
  52         PHY_STATE_STR(NOLINK)
  53         PHY_STATE_STR(CABLETEST)
  54         PHY_STATE_STR(HALTED)
  55         PHY_STATE_STR(ERROR)
  56         }
  57
  58         return NULL;
  59 }
  60
  61 static void phy_process_state_change(struct phy_device *phydev,
  62                                      enum phy_state old_state)
  63 {
  64         if (old_state != phydev->state) {
  65                 phydev_dbg(phydev, "PHY state change %s -> %s\n",
  66                            phy_state_to_str(old_state),
  67                            phy_state_to_str(phydev->state));
  68                 if (phydev->drv && phydev->drv->link_change_notify)
  69                         phydev->drv->link_change_notify(phydev);
  70         }
  71 }
  72
  73 static void phy_link_up(struct phy_device *phydev)
  74 {
  75         phydev->phy_link_change(phydev, true);
  76         phy_led_trigger_change_speed(phydev);
  77 }
  78
  79 static void phy_link_down(struct phy_device *phydev)
  80 {
  81         phydev->phy_link_change(phydev, false);
  82         phy_led_trigger_change_speed(phydev);
  83         WRITE_ONCE(phydev->link_down_events, phydev->link_down_events + 1);
  84 }
  85
  86 static const char *phy_pause_str(struct phy_device *phydev)
  87 {
  88         bool local_pause, local_asym_pause;
  89
  90         if (phydev->autoneg == AUTONEG_DISABLE)
  91                 goto no_pause;
  92
  93         local_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
  94                                         phydev->advertising);
  95         local_asym_pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
  96                                              phydev->advertising);
  97
  98         if (local_pause && phydev->pause)
  99                 return "rx/tx";
 100
 101         if (local_asym_pause && phydev->asym_pause) {
 102                 if (local_pause)
 103                         return "rx";
 104                 if (phydev->pause)
 105                         return "tx";
 106         }
 107
 108 no_pause:
 109         return "off";
 110 }
 111
 112 /**
 113  * phy_print_status - Convenience function to print out the current phy status
 114  * @phydev: the phy_device struct
 115  */
 116 void phy_print_status(struct phy_device *phydev)
 117 {
 118         if (phydev->link) {
 119                 netdev_info(phydev->attached_dev,
 120                         "Link is Up - %s/%s %s- flow control %s\n",
 121                         phy_speed_to_str(phydev->speed),
 122                         phy_duplex_to_str(phydev->duplex),
 123                         phydev->downshifted_rate ? "(downshifted) " : "",
 124                         phy_pause_str(phydev));
 125         } else  {
 126                 netdev_info(phydev->attached_dev, "Link is Down\n");
 127         }
 128 }
 129 EXPORT_SYMBOL(phy_print_status);
 130
 131 /**
 132  * phy_get_rate_matching - determine if rate matching is supported
 133  * @phydev: The phy device to return rate matching for
 134  * @iface: The interface mode to use
 135  *
 136  * This determines the type of rate matching (if any) that @phy supports
 137  * using @iface. @iface may be %PHY_INTERFACE_MODE_NA to determine if any
 138  * interface supports rate matching.
 139  *
 140  * Return: The type of rate matching @phy supports for @iface, or
 141  *         %RATE_MATCH_NONE.
 142  */
 143 int phy_get_rate_matching(struct phy_device *phydev,
 144                           phy_interface_t iface)
 145 {
 146         int ret = RATE_MATCH_NONE;
 147
 148         if (phydev->drv->get_rate_matching) {
 149                 mutex_lock(&phydev->lock);
 150                 ret = phydev->drv->get_rate_matching(phydev, iface);
 151                 mutex_unlock(&phydev->lock);
 152         }
 153
 154         return ret;
 155 }
 156 EXPORT_SYMBOL_GPL(phy_get_rate_matching);
 157
 158 /**
 159  * phy_config_interrupt - configure the PHY device for the requested interrupts
 160  * @phydev: the phy_device struct
 161  * @interrupts: interrupt flags to configure for this @phydev
 162  *
 163  * Returns 0 on success or < 0 on error.
 164  */
 165 static int phy_config_interrupt(struct phy_device *phydev, bool interrupts)
 166 {
 167         phydev->interrupts = interrupts ? 1 : 0;
 168         if (phydev->drv->config_intr)
 169                 return phydev->drv->config_intr(phydev);
 170
 171         return 0;
 172 }
 173
 174 /**
 175  * phy_restart_aneg - restart auto-negotiation
 176  * @phydev: target phy_device struct
 177  *
 178  * Restart the autonegotiation on @phydev.  Returns >= 0 on success or
 179  * negative errno on error.
 180  */
 181 int phy_restart_aneg(struct phy_device *phydev)
 182 {
 183         int ret;
 184
 185         if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
 186                 ret = genphy_c45_restart_aneg(phydev);
 187         else
 188                 ret = genphy_restart_aneg(phydev);
 189
 190         return ret;
 191 }
 192 EXPORT_SYMBOL_GPL(phy_restart_aneg);
 193
 194 /**
 195  * phy_aneg_done - return auto-negotiation status
 196  * @phydev: target phy_device struct
 197  *
 198  * Description: Return the auto-negotiation status from this @phydev
 199  * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
 200  * is still pending.
 201  */
 202 int phy_aneg_done(struct phy_device *phydev)
 203 {
 204         if (phydev->drv && phydev->drv->aneg_done)
 205                 return phydev->drv->aneg_done(phydev);
 206         else if (phydev->is_c45)
 207                 return genphy_c45_aneg_done(phydev);
 208         else
 209                 return genphy_aneg_done(phydev);
 210 }
 211 EXPORT_SYMBOL(phy_aneg_done);
 212
 213 /**
 214  * phy_find_valid - find a PHY setting that matches the requested parameters
 215  * @speed: desired speed
 216  * @duplex: desired duplex
 217  * @supported: mask of supported link modes
 218  *
 219  * Locate a supported phy setting that is, in priority order:
 220  * - an exact match for the specified speed and duplex mode
 221  * - a match for the specified speed, or slower speed
 222  * - the slowest supported speed
 223  * Returns the matched phy_setting entry, or %NULL if no supported phy
 224  * settings were found.
 225  */
 226 static const struct phy_setting *
 227 phy_find_valid(int speed, int duplex, unsigned long *supported)
 228 {
 229         return phy_lookup_setting(speed, duplex, supported, false);
 230 }
 231
 232 /**
 233  * phy_supported_speeds - return all speeds currently supported by a phy device
 234  * @phy: The phy device to return supported speeds of.
 235  * @speeds: buffer to store supported speeds in.
 236  * @size:   size of speeds buffer.
 237  *
 238  * Description: Returns the number of supported speeds, and fills the speeds
 239  * buffer with the supported speeds. If speeds buffer is too small to contain
 240  * all currently supported speeds, will return as many speeds as can fit.
 241  */
 242 unsigned int phy_supported_speeds(struct phy_device *phy,
 243                                   unsigned int *speeds,
 244                                   unsigned int size)
 245 {
 246         return phy_speeds(speeds, size, phy->supported);
 247 }
 248
 249 /**
 250  * phy_check_valid - check if there is a valid PHY setting which matches
 251  *                   speed, duplex, and feature mask
 252  * @speed: speed to match
 253  * @duplex: duplex to match
 254  * @features: A mask of the valid settings
 255  *
 256  * Description: Returns true if there is a valid setting, false otherwise.
 257  */
 258 bool phy_check_valid(int speed, int duplex, unsigned long *features)
 259 {
 260         return !!phy_lookup_setting(speed, duplex, features, true);
 261 }
 262 EXPORT_SYMBOL(phy_check_valid);
 263
 264 /**
 265  * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
 266  * @phydev: the target phy_device struct
 267  *
 268  * Description: Make sure the PHY is set to supported speeds and
 269  *   duplexes.  Drop down by one in this order:  1000/FULL,
 270  *   1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
 271  */
 272 static void phy_sanitize_settings(struct phy_device *phydev)
 273 {
 274         const struct phy_setting *setting;
 275
 276         setting = phy_find_valid(phydev->speed, phydev->duplex,
 277                                  phydev->supported);
 278         if (setting) {
 279                 phydev->speed = setting->speed;
 280                 phydev->duplex = setting->duplex;
 281         } else {
 282                 /* We failed to find anything (no supported speeds?) */
 283                 phydev->speed = SPEED_UNKNOWN;
 284                 phydev->duplex = DUPLEX_UNKNOWN;
 285         }
 286 }
 287
 288 void phy_ethtool_ksettings_get(struct phy_device *phydev,
 289                                struct ethtool_link_ksettings *cmd)
 290 {
 291         mutex_lock(&phydev->lock);
 292         linkmode_copy(cmd->link_modes.supported, phydev->supported);
 293         linkmode_copy(cmd->link_modes.advertising, phydev->advertising);
 294         linkmode_copy(cmd->link_modes.lp_advertising, phydev->lp_advertising);
 295
 296         cmd->base.speed = phydev->speed;
 297         cmd->base.duplex = phydev->duplex;
 298         cmd->base.master_slave_cfg = phydev->master_slave_get;
 299         cmd->base.master_slave_state = phydev->master_slave_state;
 300         cmd->base.rate_matching = phydev->rate_matching;
 301         if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
 302                 cmd->base.port = PORT_BNC;
 303         else
 304                 cmd->base.port = phydev->port;
 305         cmd->base.transceiver = phy_is_internal(phydev) ?
 306                                 XCVR_INTERNAL : XCVR_EXTERNAL;
 307         cmd->base.phy_address = phydev->mdio.addr;
 308         cmd->base.autoneg = phydev->autoneg;
 309         cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl;
 310         cmd->base.eth_tp_mdix = phydev->mdix;
 311         mutex_unlock(&phydev->lock);
 312 }
 313 EXPORT_SYMBOL(phy_ethtool_ksettings_get);
 314
 315 /**
 316  * phy_mii_ioctl - generic PHY MII ioctl interface
 317  * @phydev: the phy_device struct
 318  * @ifr: &struct ifreq for socket ioctl's
 319  * @cmd: ioctl cmd to execute
 320  *
 321  * Note that this function is currently incompatible with the
 322  * PHYCONTROL layer.  It changes registers without regard to
 323  * current state.  Use at own risk.
 324  */
 325 int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
 326 {
 327         struct mii_ioctl_data *mii_data = if_mii(ifr);
 328         struct kernel_hwtstamp_config kernel_cfg;
 329         struct netlink_ext_ack extack = {};
 330         u16 val = mii_data->val_in;
 331         bool change_autoneg = false;
 332         struct hwtstamp_config cfg;
 333         int prtad, devad;
 334         int ret;
 335
 336         switch (cmd) {
 337         case SIOCGMIIPHY:
 338                 mii_data->phy_id = phydev->mdio.addr;
 339                 fallthrough;
 340
 341         case SIOCGMIIREG:
 342                 if (mdio_phy_id_is_c45(mii_data->phy_id)) {
 343                         prtad = mdio_phy_id_prtad(mii_data->phy_id);
 344                         devad = mdio_phy_id_devad(mii_data->phy_id);
 345                         mii_data->val_out = mdiobus_c45_read(
 346                                 phydev->mdio.bus, prtad, devad,
 347                                 mii_data->reg_num);
 348                 } else {
 349                         mii_data->val_out = mdiobus_read(
 350                                 phydev->mdio.bus, mii_data->phy_id,
 351                                 mii_data->reg_num);
 352                 }
 353                 return 0;
 354
 355         case SIOCSMIIREG:
 356                 if (mdio_phy_id_is_c45(mii_data->phy_id)) {
 357                         prtad = mdio_phy_id_prtad(mii_data->phy_id);
 358                         devad = mdio_phy_id_devad(mii_data->phy_id);
 359                 } else {
 360                         prtad = mii_data->phy_id;
 361                         devad = mii_data->reg_num;
 362                 }
 363                 if (prtad == phydev->mdio.addr) {
 364                         switch (devad) {
 365                         case MII_BMCR:
 366                                 if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
 367                                         if (phydev->autoneg == AUTONEG_ENABLE)
 368                                                 change_autoneg = true;
 369                                         phydev->autoneg = AUTONEG_DISABLE;
 370                                         if (val & BMCR_FULLDPLX)
 371                                                 phydev->duplex = DUPLEX_FULL;
 372                                         else
 373                                                 phydev->duplex = DUPLEX_HALF;
 374                                         if (val & BMCR_SPEED1000)
 375                                                 phydev->speed = SPEED_1000;
 376                                         else if (val & BMCR_SPEED100)
 377                                                 phydev->speed = SPEED_100;
 378                                         else phydev->speed = SPEED_10;
 379                                 } else {
 380                                         if (phydev->autoneg == AUTONEG_DISABLE)
 381                                                 change_autoneg = true;
 382                                         phydev->autoneg = AUTONEG_ENABLE;
 383                                 }
 384                                 break;
 385                         case MII_ADVERTISE:
 386                                 mii_adv_mod_linkmode_adv_t(phydev->advertising,
 387                                                            val);
 388                                 change_autoneg = true;
 389                                 break;
 390                         case MII_CTRL1000:
 391                                 mii_ctrl1000_mod_linkmode_adv_t(phydev->advertising,
 392                                                                 val);
 393                                 change_autoneg = true;
 394                                 break;
 395                         default:
 396                                 /* do nothing */
 397                                 break;
 398                         }
 399                 }
 400
 401                 if (mdio_phy_id_is_c45(mii_data->phy_id))
 402                         mdiobus_c45_write(phydev->mdio.bus, prtad, devad,
 403                                           mii_data->reg_num, val);
 404                 else
 405                         mdiobus_write(phydev->mdio.bus, prtad, devad, val);
 406
 407                 if (prtad == phydev->mdio.addr &&
 408                     devad == MII_BMCR &&
 409                     val & BMCR_RESET)
 410                         return phy_init_hw(phydev);
 411
 412                 if (change_autoneg)
 413                         return phy_start_aneg(phydev);
 414
 415                 return 0;
 416
 417         case SIOCSHWTSTAMP:
 418                 if (phydev->mii_ts && phydev->mii_ts->hwtstamp) {
 419                         if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg)))
 420                                 return -EFAULT;
 421
 422                         hwtstamp_config_to_kernel(&kernel_cfg, &cfg);
 423                         ret = phydev->mii_ts->hwtstamp(phydev->mii_ts, &kernel_cfg, &extack);
 424                         if (ret)
 425                                 return ret;
 426
 427                         hwtstamp_config_from_kernel(&cfg, &kernel_cfg);
 428                         if (copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)))
 429                                 return -EFAULT;
 430
 431                         return 0;
 432                 }
 433                 fallthrough;
 434
 435         default:
 436                 return -EOPNOTSUPP;
 437         }
 438 }
 439 EXPORT_SYMBOL(phy_mii_ioctl);
 440
 441 /**
 442  * phy_do_ioctl - generic ndo_eth_ioctl implementation
 443  * @dev: the net_device struct
 444  * @ifr: &struct ifreq for socket ioctl's
 445  * @cmd: ioctl cmd to execute
 446  */
 447 int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 448 {
 449         if (!dev->phydev)
 450                 return -ENODEV;
 451
 452         return phy_mii_ioctl(dev->phydev, ifr, cmd);
 453 }
 454 EXPORT_SYMBOL(phy_do_ioctl);
 455
 456 /**
 457  * phy_do_ioctl_running - generic ndo_eth_ioctl implementation but test first
 458  *
 459  * @dev: the net_device struct
 460  * @ifr: &struct ifreq for socket ioctl's
 461  * @cmd: ioctl cmd to execute
 462  *
 463  * Same as phy_do_ioctl, but ensures that net_device is running before
 464  * handling the ioctl.
 465  */
 466 int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd)
 467 {
 468         if (!netif_running(dev))
 469                 return -ENODEV;
 470
 471         return phy_do_ioctl(dev, ifr, cmd);
 472 }
 473 EXPORT_SYMBOL(phy_do_ioctl_running);
 474
 475 /**
 476  * __phy_hwtstamp_get - Get hardware timestamping configuration from PHY
 477  *
 478  * @phydev: the PHY device structure
 479  * @config: structure holding the timestamping configuration
 480  *
 481  * Query the PHY device for its current hardware timestamping configuration.
 482  */
 483 int __phy_hwtstamp_get(struct phy_device *phydev,
 484                        struct kernel_hwtstamp_config *config)
 485 {
 486         if (!phydev)
 487                 return -ENODEV;
 488
 489         return -EOPNOTSUPP;
 490 }
 491
 492 /**
 493  * __phy_hwtstamp_set - Modify PHY hardware timestamping configuration
 494  *
 495  * @phydev: the PHY device structure
 496  * @config: structure holding the timestamping configuration
 497  * @extack: netlink extended ack structure, for error reporting
 498  */
 499 int __phy_hwtstamp_set(struct phy_device *phydev,
 500                        struct kernel_hwtstamp_config *config,
 501                        struct netlink_ext_ack *extack)
 502 {
 503         if (!phydev)
 504                 return -ENODEV;
 505
 506         if (phydev->mii_ts && phydev->mii_ts->hwtstamp)
 507                 return phydev->mii_ts->hwtstamp(phydev->mii_ts, config, extack);
 508
 509         return -EOPNOTSUPP;
 510 }
 511
 512 /**
 513  * phy_queue_state_machine - Trigger the state machine to run soon
 514  *
 515  * @phydev: the phy_device struct
 516  * @jiffies: Run the state machine after these jiffies
 517  */
 518 void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies)
 519 {
 520         mod_delayed_work(system_power_efficient_wq, &phydev->state_queue,
 521                          jiffies);
 522 }
 523 EXPORT_SYMBOL(phy_queue_state_machine);
 524
 525 /**
 526  * phy_trigger_machine - Trigger the state machine to run now
 527  *
 528  * @phydev: the phy_device struct
 529  */
 530 void phy_trigger_machine(struct phy_device *phydev)
 531 {
 532         phy_queue_state_machine(phydev, 0);
 533 }
 534 EXPORT_SYMBOL(phy_trigger_machine);
 535
 536 static void phy_abort_cable_test(struct phy_device *phydev)
 537 {
 538         int err;
 539
 540         ethnl_cable_test_finished(phydev);
 541
 542         err = phy_init_hw(phydev);
 543         if (err)
 544                 phydev_err(phydev, "Error while aborting cable test");
 545 }
 546
 547 /**
 548  * phy_ethtool_get_strings - Get the statistic counter names
 549  *
 550  * @phydev: the phy_device struct
 551  * @data: Where to put the strings
 552  */
 553 int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
 554 {
 555         if (!phydev->drv)
 556                 return -EIO;
 557
 558         mutex_lock(&phydev->lock);
 559         phydev->drv->get_strings(phydev, data);
 560         mutex_unlock(&phydev->lock);
 561
 562         return 0;
 563 }
 564 EXPORT_SYMBOL(phy_ethtool_get_strings);
 565
 566 /**
 567  * phy_ethtool_get_sset_count - Get the number of statistic counters
 568  *
 569  * @phydev: the phy_device struct
 570  */
 571 int phy_ethtool_get_sset_count(struct phy_device *phydev)
 572 {
 573         int ret;
 574
 575         if (!phydev->drv)
 576                 return -EIO;
 577
 578         if (phydev->drv->get_sset_count &&
 579             phydev->drv->get_strings &&
 580             phydev->drv->get_stats) {
 581                 mutex_lock(&phydev->lock);
 582                 ret = phydev->drv->get_sset_count(phydev);
 583                 mutex_unlock(&phydev->lock);
 584
 585                 return ret;
 586         }
 587
 588         return -EOPNOTSUPP;
 589 }
 590 EXPORT_SYMBOL(phy_ethtool_get_sset_count);
 591
 592 /**
 593  * phy_ethtool_get_stats - Get the statistic counters
 594  *
 595  * @phydev: the phy_device struct
 596  * @stats: What counters to get
 597  * @data: Where to store the counters
 598  */
 599 int phy_ethtool_get_stats(struct phy_device *phydev,
 600                           struct ethtool_stats *stats, u64 *data)
 601 {
 602         if (!phydev->drv)
 603                 return -EIO;
 604
 605         mutex_lock(&phydev->lock);
 606         phydev->drv->get_stats(phydev, stats, data);
 607         mutex_unlock(&phydev->lock);
 608
 609         return 0;
 610 }
 611 EXPORT_SYMBOL(phy_ethtool_get_stats);
 612
 613 /**
 614  * phy_ethtool_get_plca_cfg - Get PLCA RS configuration
 615  * @phydev: the phy_device struct
 616  * @plca_cfg: where to store the retrieved configuration
 617  *
 618  * Retrieve the PLCA configuration from the PHY. Return 0 on success or a
 619  * negative value if an error occurred.
 620  */
 621 int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
 622                              struct phy_plca_cfg *plca_cfg)
 623 {
 624         int ret;
 625
 626         if (!phydev->drv) {
 627                 ret = -EIO;
 628                 goto out;
 629         }
 630
 631         if (!phydev->drv->get_plca_cfg) {
 632                 ret = -EOPNOTSUPP;
 633                 goto out;
 634         }
 635
 636         mutex_lock(&phydev->lock);
 637         ret = phydev->drv->get_plca_cfg(phydev, plca_cfg);
 638
 639         mutex_unlock(&phydev->lock);
 640 out:
 641         return ret;
 642 }
 643
 644 /**
 645  * plca_check_valid - Check PLCA configuration before enabling
 646  * @phydev: the phy_device struct
 647  * @plca_cfg: current PLCA configuration
 648  * @extack: extack for reporting useful error messages
 649  *
 650  * Checks whether the PLCA and PHY configuration are consistent and it is safe
 651  * to enable PLCA. Returns 0 on success or a negative value if the PLCA or PHY
 652  * configuration is not consistent.
 653  */
 654 static int plca_check_valid(struct phy_device *phydev,
 655                             const struct phy_plca_cfg *plca_cfg,
 656                             struct netlink_ext_ack *extack)
 657 {
 658         int ret = 0;
 659
 660         if (!linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT,
 661                                phydev->advertising)) {
 662                 ret = -EOPNOTSUPP;
 663                 NL_SET_ERR_MSG(extack,
 664                                "Point to Multi-Point mode is not enabled");
 665         } else if (plca_cfg->node_id >= 255) {
 666                 NL_SET_ERR_MSG(extack, "PLCA node ID is not set");
 667                 ret = -EINVAL;
 668         }
 669
 670         return ret;
 671 }
 672
 673 /**
 674  * phy_ethtool_set_plca_cfg - Set PLCA RS configuration
 675  * @phydev: the phy_device struct
 676  * @plca_cfg: new PLCA configuration to apply
 677  * @extack: extack for reporting useful error messages
 678  *
 679  * Sets the PLCA configuration in the PHY. Return 0 on success or a
 680  * negative value if an error occurred.
 681  */
 682 int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
 683                              const struct phy_plca_cfg *plca_cfg,
 684                              struct netlink_ext_ack *extack)
 685 {
 686         struct phy_plca_cfg *curr_plca_cfg;
 687         int ret;
 688
 689         if (!phydev->drv) {
 690                 ret = -EIO;
 691                 goto out;
 692         }
 693
 694         if (!phydev->drv->set_plca_cfg ||
 695             !phydev->drv->get_plca_cfg) {
 696                 ret = -EOPNOTSUPP;
 697                 goto out;
 698         }
 699
 700         curr_plca_cfg = kmalloc(sizeof(*curr_plca_cfg), GFP_KERNEL);
 701         if (!curr_plca_cfg) {
 702                 ret = -ENOMEM;
 703                 goto out;
 704         }
 705
 706         mutex_lock(&phydev->lock);
 707
 708         ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg);
 709         if (ret)
 710                 goto out_drv;
 711
 712         if (curr_plca_cfg->enabled < 0 && plca_cfg->enabled >= 0) {
 713                 NL_SET_ERR_MSG(extack,
 714                                "PHY does not support changing the PLCA 'enable' attribute");
 715                 ret = -EINVAL;
 716                 goto out_drv;
 717         }
 718
 719         if (curr_plca_cfg->node_id < 0 && plca_cfg->node_id >= 0) {
 720                 NL_SET_ERR_MSG(extack,
 721                                "PHY does not support changing the PLCA 'local node ID' attribute");
 722                 ret = -EINVAL;
 723                 goto out_drv;
 724         }
 725
 726         if (curr_plca_cfg->node_cnt < 0 && plca_cfg->node_cnt >= 0) {
 727                 NL_SET_ERR_MSG(extack,
 728                                "PHY does not support changing the PLCA 'node count' attribute");
 729                 ret = -EINVAL;
 730                 goto out_drv;
 731         }
 732
 733         if (curr_plca_cfg->to_tmr < 0 && plca_cfg->to_tmr >= 0) {
 734                 NL_SET_ERR_MSG(extack,
 735                                "PHY does not support changing the PLCA 'TO timer' attribute");
 736                 ret = -EINVAL;
 737                 goto out_drv;
 738         }
 739
 740         if (curr_plca_cfg->burst_cnt < 0 && plca_cfg->burst_cnt >= 0) {
 741                 NL_SET_ERR_MSG(extack,
 742                                "PHY does not support changing the PLCA 'burst count' attribute");
 743                 ret = -EINVAL;
 744                 goto out_drv;
 745         }
 746
 747         if (curr_plca_cfg->burst_tmr < 0 && plca_cfg->burst_tmr >= 0) {
 748                 NL_SET_ERR_MSG(extack,
 749                                "PHY does not support changing the PLCA 'burst timer' attribute");
 750                 ret = -EINVAL;
 751                 goto out_drv;
 752         }
 753
 754         // if enabling PLCA, perform a few sanity checks
 755         if (plca_cfg->enabled > 0) {
 756                 // allow setting node_id concurrently with enabled
 757                 if (plca_cfg->node_id >= 0)
 758                         curr_plca_cfg->node_id = plca_cfg->node_id;
 759
 760                 ret = plca_check_valid(phydev, curr_plca_cfg, extack);
 761                 if (ret)
 762                         goto out_drv;
 763         }
 764
 765         ret = phydev->drv->set_plca_cfg(phydev, plca_cfg);
 766
 767 out_drv:
 768         kfree(curr_plca_cfg);
 769         mutex_unlock(&phydev->lock);
 770 out:
 771         return ret;
 772 }
 773
 774 /**
 775  * phy_ethtool_get_plca_status - Get PLCA RS status information
 776  * @phydev: the phy_device struct
 777  * @plca_st: where to store the retrieved status information
 778  *
 779  * Retrieve the PLCA status information from the PHY. Return 0 on success or a
 780  * negative value if an error occurred.
 781  */
 782 int phy_ethtool_get_plca_status(struct phy_device *phydev,
 783                                 struct phy_plca_status *plca_st)
 784 {
 785         int ret;
 786
 787         if (!phydev->drv) {
 788                 ret = -EIO;
 789                 goto out;
 790         }
 791
 792         if (!phydev->drv->get_plca_status) {
 793                 ret = -EOPNOTSUPP;
 794                 goto out;
 795         }
 796
 797         mutex_lock(&phydev->lock);
 798         ret = phydev->drv->get_plca_status(phydev, plca_st);
 799
 800         mutex_unlock(&phydev->lock);
 801 out:
 802         return ret;
 803 }
 804
 805 /**
 806  * phy_start_cable_test - Start a cable test
 807  *
 808  * @phydev: the phy_device struct
 809  * @extack: extack for reporting useful error messages
 810  */
 811 int phy_start_cable_test(struct phy_device *phydev,
 812                          struct netlink_ext_ack *extack)
 813 {
 814         struct net_device *dev = phydev->attached_dev;
 815         int err = -ENOMEM;
 816
 817         if (!(phydev->drv &&
 818               phydev->drv->cable_test_start &&
 819               phydev->drv->cable_test_get_status)) {
 820                 NL_SET_ERR_MSG(extack,
 821                                "PHY driver does not support cable testing");
 822                 return -EOPNOTSUPP;
 823         }
 824
 825         mutex_lock(&phydev->lock);
 826         if (phydev->state == PHY_CABLETEST) {
 827                 NL_SET_ERR_MSG(extack,
 828                                "PHY already performing a test");
 829                 err = -EBUSY;
 830                 goto out;
 831         }
 832
 833         if (phydev->state < PHY_UP ||
 834             phydev->state > PHY_CABLETEST) {
 835                 NL_SET_ERR_MSG(extack,
 836                                "PHY not configured. Try setting interface up");
 837                 err = -EBUSY;
 838                 goto out;
 839         }
 840
 841         err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF);
 842         if (err)
 843                 goto out;
 844
 845         /* Mark the carrier down until the test is complete */
 846         phy_link_down(phydev);
 847
 848         netif_testing_on(dev);
 849         err = phydev->drv->cable_test_start(phydev);
 850         if (err) {
 851                 netif_testing_off(dev);
 852                 phy_link_up(phydev);
 853                 goto out_free;
 854         }
 855
 856         phydev->state = PHY_CABLETEST;
 857
 858         if (phy_polling_mode(phydev))
 859                 phy_trigger_machine(phydev);
 860
 861         mutex_unlock(&phydev->lock);
 862
 863         return 0;
 864
 865 out_free:
 866         ethnl_cable_test_free(phydev);
 867 out:
 868         mutex_unlock(&phydev->lock);
 869
 870         return err;
 871 }
 872 EXPORT_SYMBOL(phy_start_cable_test);
 873
 874 /**
 875  * phy_start_cable_test_tdr - Start a raw TDR cable test
 876  *
 877  * @phydev: the phy_device struct
 878  * @extack: extack for reporting useful error messages
 879  * @config: Configuration of the test to run
 880  */
 881 int phy_start_cable_test_tdr(struct phy_device *phydev,
 882                              struct netlink_ext_ack *extack,
 883                              const struct phy_tdr_config *config)
 884 {
 885         struct net_device *dev = phydev->attached_dev;
 886         int err = -ENOMEM;
 887
 888         if (!(phydev->drv &&
 889               phydev->drv->cable_test_tdr_start &&
 890               phydev->drv->cable_test_get_status)) {
 891                 NL_SET_ERR_MSG(extack,
 892                                "PHY driver does not support cable test TDR");
 893                 return -EOPNOTSUPP;
 894         }
 895
 896         mutex_lock(&phydev->lock);
 897         if (phydev->state == PHY_CABLETEST) {
 898                 NL_SET_ERR_MSG(extack,
 899                                "PHY already performing a test");
 900                 err = -EBUSY;
 901                 goto out;
 902         }
 903
 904         if (phydev->state < PHY_UP ||
 905             phydev->state > PHY_CABLETEST) {
 906                 NL_SET_ERR_MSG(extack,
 907                                "PHY not configured. Try setting interface up");
 908                 err = -EBUSY;
 909                 goto out;
 910         }
 911
 912         err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_TDR_NTF);
 913         if (err)
 914                 goto out;
 915
 916         /* Mark the carrier down until the test is complete */
 917         phy_link_down(phydev);
 918
 919         netif_testing_on(dev);
 920         err = phydev->drv->cable_test_tdr_start(phydev, config);
 921         if (err) {
 922                 netif_testing_off(dev);
 923                 phy_link_up(phydev);
 924                 goto out_free;
 925         }
 926
 927         phydev->state = PHY_CABLETEST;
 928
 929         if (phy_polling_mode(phydev))
 930                 phy_trigger_machine(phydev);
 931
 932         mutex_unlock(&phydev->lock);
 933
 934         return 0;
 935
 936 out_free:
 937         ethnl_cable_test_free(phydev);
 938 out:
 939         mutex_unlock(&phydev->lock);
 940
 941         return err;
 942 }
 943 EXPORT_SYMBOL(phy_start_cable_test_tdr);
 944
 945 int phy_config_aneg(struct phy_device *phydev)
 946 {
 947         if (phydev->drv->config_aneg)
 948                 return phydev->drv->config_aneg(phydev);
 949
 950         /* Clause 45 PHYs that don't implement Clause 22 registers are not
 951          * allowed to call genphy_config_aneg()
 952          */
 953         if (phydev->is_c45 && !(phydev->c45_ids.devices_in_package & BIT(0)))
 954                 return genphy_c45_config_aneg(phydev);
 955
 956         return genphy_config_aneg(phydev);
 957 }
 958 EXPORT_SYMBOL(phy_config_aneg);
 959
 960 /**
 961  * phy_check_link_status - check link status and set state accordingly
 962  * @phydev: the phy_device struct
 963  *
 964  * Description: Check for link and whether autoneg was triggered / is running
 965  * and set state accordingly
 966  */
 967 static int phy_check_link_status(struct phy_device *phydev)
 968 {
 969         int err;
 970
 971         lockdep_assert_held(&phydev->lock);
 972
 973         /* Keep previous state if loopback is enabled because some PHYs
 974          * report that Link is Down when loopback is enabled.
 975          */
 976         if (phydev->loopback_enabled)
 977                 return 0;
 978
 979         err = phy_read_status(phydev);
 980         if (err)
 981                 return err;
 982
 983         if (phydev->link && phydev->state != PHY_RUNNING) {
 984                 phy_check_downshift(phydev);
 985                 phydev->state = PHY_RUNNING;
 986                 phy_link_up(phydev);
 987         } else if (!phydev->link && phydev->state != PHY_NOLINK) {
 988                 phydev->state = PHY_NOLINK;
 989                 phy_link_down(phydev);
 990         }
 991
 992         return 0;
 993 }
 994
 995 /**
 996  * _phy_start_aneg - start auto-negotiation for this PHY device
 997  * @phydev: the phy_device struct
 998  *
 999  * Description: Sanitizes the settings (if we're not autonegotiating
1000  *   them), and then calls the driver's config_aneg function.
1001  *   If the PHYCONTROL Layer is operating, we change the state to
1002  *   reflect the beginning of Auto-negotiation or forcing.
1003  */
1004 int _phy_start_aneg(struct phy_device *phydev)
1005 {
1006         int err;
1007
1008         lockdep_assert_held(&phydev->lock);
1009
1010         if (!phydev->drv)
1011                 return -EIO;
1012
1013         if (AUTONEG_DISABLE == phydev->autoneg)
1014                 phy_sanitize_settings(phydev);
1015
1016         err = phy_config_aneg(phydev);
1017         if (err < 0)
1018                 return err;
1019
1020         if (phy_is_started(phydev))
1021                 err = phy_check_link_status(phydev);
1022
1023         return err;
1024 }
1025 EXPORT_SYMBOL(_phy_start_aneg);
1026
1027 /**
1028  * phy_start_aneg - start auto-negotiation for this PHY device
1029  * @phydev: the phy_device struct
1030  *
1031  * Description: Sanitizes the settings (if we're not autonegotiating
1032  *   them), and then calls the driver's config_aneg function.
1033  *   If the PHYCONTROL Layer is operating, we change the state to
1034  *   reflect the beginning of Auto-negotiation or forcing.
1035  */
1036 int phy_start_aneg(struct phy_device *phydev)
1037 {
1038         int err;
1039
1040         mutex_lock(&phydev->lock);
1041         err = _phy_start_aneg(phydev);
1042         mutex_unlock(&phydev->lock);
1043
1044         return err;
1045 }
1046 EXPORT_SYMBOL(phy_start_aneg);
1047
1048 static int phy_poll_aneg_done(struct phy_device *phydev)
1049 {
1050         unsigned int retries = 100;
1051         int ret;
1052
1053         do {
1054                 msleep(100);
1055                 ret = phy_aneg_done(phydev);
1056         } while (!ret && --retries);
1057
1058         if (!ret)
1059                 return -ETIMEDOUT;
1060
1061         return ret < 0 ? ret : 0;
1062 }
1063
1064 int phy_ethtool_ksettings_set(struct phy_device *phydev,
1065                               const struct ethtool_link_ksettings *cmd)
1066 {
1067         __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
1068         u8 autoneg = cmd->base.autoneg;
1069         u8 duplex = cmd->base.duplex;
1070         u32 speed = cmd->base.speed;
1071
1072         if (cmd->base.phy_address != phydev->mdio.addr)
1073                 return -EINVAL;
1074
1075         linkmode_copy(advertising, cmd->link_modes.advertising);
1076
1077         /* We make sure that we don't pass unsupported values in to the PHY */
1078         linkmode_and(advertising, advertising, phydev->supported);
1079
1080         /* Verify the settings we care about. */
1081         if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
1082                 return -EINVAL;
1083
1084         if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
1085                 return -EINVAL;
1086
1087         if (autoneg == AUTONEG_DISABLE &&
1088             ((speed != SPEED_1000 &&
1089               speed != SPEED_100 &&
1090               speed != SPEED_10) ||
1091              (duplex != DUPLEX_HALF &&
1092               duplex != DUPLEX_FULL)))
1093                 return -EINVAL;
1094
1095         mutex_lock(&phydev->lock);
1096         phydev->autoneg = autoneg;
1097
1098         if (autoneg == AUTONEG_DISABLE) {
1099                 phydev->speed = speed;
1100                 phydev->duplex = duplex;
1101         }
1102
1103         linkmode_copy(phydev->advertising, advertising);
1104
1105         linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
1106                          phydev->advertising, autoneg == AUTONEG_ENABLE);
1107
1108         phydev->master_slave_set = cmd->base.master_slave_cfg;
1109         phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
1110
1111         /* Restart the PHY */
1112         if (phy_is_started(phydev)) {
1113                 phydev->state = PHY_UP;
1114                 phy_trigger_machine(phydev);
1115         } else {
1116                 _phy_start_aneg(phydev);
1117         }
1118
1119         mutex_unlock(&phydev->lock);
1120         return 0;
1121 }
1122 EXPORT_SYMBOL(phy_ethtool_ksettings_set);
1123
1124 /**
1125  * phy_speed_down - set speed to lowest speed supported by both link partners
1126  * @phydev: the phy_device struct
1127  * @sync: perform action synchronously
1128  *
1129  * Description: Typically used to save energy when waiting for a WoL packet
1130  *
1131  * WARNING: Setting sync to false may cause the system being unable to suspend
1132  * in case the PHY generates an interrupt when finishing the autonegotiation.
1133  * This interrupt may wake up the system immediately after suspend.
1134  * Therefore use sync = false only if you're sure it's safe with the respective
1135  * network chip.
1136  */
1137 int phy_speed_down(struct phy_device *phydev, bool sync)
1138 {
1139         __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp);
1140         int ret = 0;
1141
1142         mutex_lock(&phydev->lock);
1143
1144         if (phydev->autoneg != AUTONEG_ENABLE)
1145                 goto out;
1146
1147         linkmode_copy(adv_tmp, phydev->advertising);
1148
1149         ret = phy_speed_down_core(phydev);
1150         if (ret)
1151                 goto out;
1152
1153         linkmode_copy(phydev->adv_old, adv_tmp);
1154
1155         if (linkmode_equal(phydev->advertising, adv_tmp)) {
1156                 ret = 0;
1157                 goto out;
1158         }
1159
1160         ret = phy_config_aneg(phydev);
1161         if (ret)
1162                 goto out;
1163
1164         ret = sync ? phy_poll_aneg_done(phydev) : 0;
1165 out:
1166         mutex_unlock(&phydev->lock);
1167
1168         return ret;
1169 }
1170 EXPORT_SYMBOL_GPL(phy_speed_down);
1171
1172 /**
1173  * phy_speed_up - (re)set advertised speeds to all supported speeds
1174  * @phydev: the phy_device struct
1175  *
1176  * Description: Used to revert the effect of phy_speed_down
1177  */
1178 int phy_speed_up(struct phy_device *phydev)
1179 {
1180         __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp);
1181         int ret = 0;
1182
1183         mutex_lock(&phydev->lock);
1184
1185         if (phydev->autoneg != AUTONEG_ENABLE)
1186                 goto out;
1187
1188         if (linkmode_empty(phydev->adv_old))
1189                 goto out;
1190
1191         linkmode_copy(adv_tmp, phydev->advertising);
1192         linkmode_copy(phydev->advertising, phydev->adv_old);
1193         linkmode_zero(phydev->adv_old);
1194
1195         if (linkmode_equal(phydev->advertising, adv_tmp))
1196                 goto out;
1197
1198         ret = phy_config_aneg(phydev);
1199 out:
1200         mutex_unlock(&phydev->lock);
1201
1202         return ret;
1203 }
1204 EXPORT_SYMBOL_GPL(phy_speed_up);
1205
1206 /**
1207  * phy_start_machine - start PHY state machine tracking
1208  * @phydev: the phy_device struct
1209  *
1210  * Description: The PHY infrastructure can run a state machine
1211  *   which tracks whether the PHY is starting up, negotiating,
1212  *   etc.  This function starts the delayed workqueue which tracks
1213  *   the state of the PHY. If you want to maintain your own state machine,
1214  *   do not call this function.
1215  */
1216 void phy_start_machine(struct phy_device *phydev)
1217 {
1218         phy_trigger_machine(phydev);
1219 }
1220 EXPORT_SYMBOL_GPL(phy_start_machine);
1221
1222 /**
1223  * phy_stop_machine - stop the PHY state machine tracking
1224  * @phydev: target phy_device struct
1225  *
1226  * Description: Stops the state machine delayed workqueue, sets the
1227  *   state to UP (unless it wasn't up yet). This function must be
1228  *   called BEFORE phy_detach.
1229  */
1230 void phy_stop_machine(struct phy_device *phydev)
1231 {
1232         cancel_delayed_work_sync(&phydev->state_queue);
1233
1234         mutex_lock(&phydev->lock);
1235         if (phy_is_started(phydev))
1236                 phydev->state = PHY_UP;
1237         mutex_unlock(&phydev->lock);
1238 }
1239
1240 static void phy_process_error(struct phy_device *phydev)
1241 {
1242         /* phydev->lock must be held for the state change to be safe */
1243         if (!mutex_is_locked(&phydev->lock))
1244                 phydev_err(phydev, "PHY-device data unsafe context\n");
1245
1246         phydev->state = PHY_ERROR;
1247
1248         phy_trigger_machine(phydev);
1249 }
1250
1251 static void phy_error_precise(struct phy_device *phydev,
1252                               const void *func, int err)
1253 {
1254         WARN(1, "%pS: returned: %d\n", func, err);
1255         phy_process_error(phydev);
1256 }
1257
1258 /**
1259  * phy_error - enter ERROR state for this PHY device
1260  * @phydev: target phy_device struct
1261  *
1262  * Moves the PHY to the ERROR state in response to a read
1263  * or write error, and tells the controller the link is down.
1264  * Must be called with phydev->lock held.
1265  */
1266 void phy_error(struct phy_device *phydev)
1267 {
1268         WARN_ON(1);
1269         phy_process_error(phydev);
1270 }
1271 EXPORT_SYMBOL(phy_error);
1272
1273 /**
1274  * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
1275  * @phydev: target phy_device struct
1276  */
1277 int phy_disable_interrupts(struct phy_device *phydev)
1278 {
1279         /* Disable PHY interrupts */
1280         return phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
1281 }
1282
1283 /**
1284  * phy_interrupt - PHY interrupt handler
1285  * @irq: interrupt line
1286  * @phy_dat: phy_device pointer
1287  *
1288  * Description: Handle PHY interrupt
1289  */
1290 static irqreturn_t phy_interrupt(int irq, void *phy_dat)
1291 {
1292         struct phy_device *phydev = phy_dat;
1293         struct phy_driver *drv = phydev->drv;
1294         irqreturn_t ret;
1295
1296         /* Wakeup interrupts may occur during a system sleep transition.
1297          * Postpone handling until the PHY has resumed.
1298          */
1299         if (IS_ENABLED(CONFIG_PM_SLEEP) && phydev->irq_suspended) {
1300                 struct net_device *netdev = phydev->attached_dev;
1301
1302                 if (netdev) {
1303                         struct device *parent = netdev->dev.parent;
1304
1305                         if (netdev->wol_enabled)
1306                                 pm_system_wakeup();
1307                         else if (device_may_wakeup(&netdev->dev))
1308                                 pm_wakeup_dev_event(&netdev->dev, 0, true);
1309                         else if (parent && device_may_wakeup(parent))
1310                                 pm_wakeup_dev_event(parent, 0, true);
1311                 }
1312
1313                 phydev->irq_rerun = 1;
1314                 disable_irq_nosync(irq);
1315                 return IRQ_HANDLED;
1316         }
1317
1318         mutex_lock(&phydev->lock);
1319         ret = drv->handle_interrupt(phydev);
1320         mutex_unlock(&phydev->lock);
1321
1322         return ret;
1323 }
1324
1325 /**
1326  * phy_enable_interrupts - Enable the interrupts from the PHY side
1327  * @phydev: target phy_device struct
1328  */
1329 static int phy_enable_interrupts(struct phy_device *phydev)
1330 {
1331         return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
1332 }
1333
1334 /**
1335  * phy_request_interrupt - request and enable interrupt for a PHY device
1336  * @phydev: target phy_device struct
1337  *
1338  * Description: Request and enable the interrupt for the given PHY.
1339  *   If this fails, then we set irq to PHY_POLL.
1340  *   This should only be called with a valid IRQ number.
1341  */
1342 void phy_request_interrupt(struct phy_device *phydev)
1343 {
1344         int err;
1345
1346         err = request_threaded_irq(phydev->irq, NULL, phy_interrupt,
1347                                    IRQF_ONESHOT | IRQF_SHARED,
1348                                    phydev_name(phydev), phydev);
1349         if (err) {
1350                 phydev_warn(phydev, "Error %d requesting IRQ %d, falling back to polling\n",
1351                             err, phydev->irq);
1352                 phydev->irq = PHY_POLL;
1353         } else {
1354                 if (phy_enable_interrupts(phydev)) {
1355                         phydev_warn(phydev, "Can't enable interrupt, falling back to polling\n");
1356                         phy_free_interrupt(phydev);
1357                         phydev->irq = PHY_POLL;
1358                 }
1359         }
1360 }
1361 EXPORT_SYMBOL(phy_request_interrupt);
1362
1363 /**
1364  * phy_free_interrupt - disable and free interrupt for a PHY device
1365  * @phydev: target phy_device struct
1366  *
1367  * Description: Disable and free the interrupt for the given PHY.
1368  *   This should only be called with a valid IRQ number.
1369  */
1370 void phy_free_interrupt(struct phy_device *phydev)
1371 {
1372         phy_disable_interrupts(phydev);
1373         free_irq(phydev->irq, phydev);
1374 }
1375 EXPORT_SYMBOL(phy_free_interrupt);
1376
1377 enum phy_state_work {
1378         PHY_STATE_WORK_NONE,
1379         PHY_STATE_WORK_ANEG,
1380         PHY_STATE_WORK_SUSPEND,
1381 };
1382
1383 static enum phy_state_work _phy_state_machine(struct phy_device *phydev)
1384 {
1385         enum phy_state_work state_work = PHY_STATE_WORK_NONE;
1386         struct net_device *dev = phydev->attached_dev;
1387         enum phy_state old_state = phydev->state;
1388         const void *func = NULL;
1389         bool finished = false;
1390         int err = 0;
1391
1392         switch (phydev->state) {
1393         case PHY_DOWN:
1394         case PHY_READY:
1395                 break;
1396         case PHY_UP:
1397                 state_work = PHY_STATE_WORK_ANEG;
1398                 break;
1399         case PHY_NOLINK:
1400         case PHY_RUNNING:
1401                 err = phy_check_link_status(phydev);
1402                 func = &phy_check_link_status;
1403                 break;
1404         case PHY_CABLETEST:
1405                 err = phydev->drv->cable_test_get_status(phydev, &finished);
1406                 if (err) {
1407                         phy_abort_cable_test(phydev);
1408                         netif_testing_off(dev);
1409                         state_work = PHY_STATE_WORK_ANEG;
1410                         phydev->state = PHY_UP;
1411                         break;
1412                 }
1413
1414                 if (finished) {
1415                         ethnl_cable_test_finished(phydev);
1416                         netif_testing_off(dev);
1417                         state_work = PHY_STATE_WORK_ANEG;
1418                         phydev->state = PHY_UP;
1419                 }
1420                 break;
1421         case PHY_HALTED:
1422         case PHY_ERROR:
1423                 if (phydev->link) {
1424                         phydev->link = 0;
1425                         phy_link_down(phydev);
1426                 }
1427                 state_work = PHY_STATE_WORK_SUSPEND;
1428                 break;
1429         }
1430
1431         if (state_work == PHY_STATE_WORK_ANEG) {
1432                 err = _phy_start_aneg(phydev);
1433                 func = &_phy_start_aneg;
1434         }
1435
1436         if (err == -ENODEV)
1437                 return state_work;
1438
1439         if (err < 0)
1440                 phy_error_precise(phydev, func, err);
1441
1442         phy_process_state_change(phydev, old_state);
1443
1444         /* Only re-schedule a PHY state machine change if we are polling the
1445          * PHY, if PHY_MAC_INTERRUPT is set, then we will be moving
1446          * between states from phy_mac_interrupt().
1447          *
1448          * In state PHY_HALTED the PHY gets suspended, so rescheduling the
1449          * state machine would be pointless and possibly error prone when
1450          * called from phy_disconnect() synchronously.
1451          */
1452         if (phy_polling_mode(phydev) && phy_is_started(phydev))
1453                 phy_queue_state_machine(phydev, PHY_STATE_TIME);
1454
1455         return state_work;
1456 }
1457
1458 /* unlocked part of the PHY state machine */
1459 static void _phy_state_machine_post_work(struct phy_device *phydev,
1460                                          enum phy_state_work state_work)
1461 {
1462         if (state_work == PHY_STATE_WORK_SUSPEND)
1463                 phy_suspend(phydev);
1464 }
1465
1466 /**
1467  * phy_state_machine - Handle the state machine
1468  * @work: work_struct that describes the work to be done
1469  */
1470 void phy_state_machine(struct work_struct *work)
1471 {
1472         struct delayed_work *dwork = to_delayed_work(work);
1473         struct phy_device *phydev =
1474                         container_of(dwork, struct phy_device, state_queue);
1475         enum phy_state_work state_work;
1476
1477         mutex_lock(&phydev->lock);
1478         state_work = _phy_state_machine(phydev);
1479         mutex_unlock(&phydev->lock);
1480
1481         _phy_state_machine_post_work(phydev, state_work);
1482 }
1483
1484 /**
1485  * phy_stop - Bring down the PHY link, and stop checking the status
1486  * @phydev: target phy_device struct
1487  */
1488 void phy_stop(struct phy_device *phydev)
1489 {
1490         struct net_device *dev = phydev->attached_dev;
1491         enum phy_state_work state_work;
1492         enum phy_state old_state;
1493
1494         if (!phy_is_started(phydev) && phydev->state != PHY_DOWN &&
1495             phydev->state != PHY_ERROR) {
1496                 WARN(1, "called from state %s\n",
1497                      phy_state_to_str(phydev->state));
1498                 return;
1499         }
1500
1501         mutex_lock(&phydev->lock);
1502         old_state = phydev->state;
1503
1504         if (phydev->state == PHY_CABLETEST) {
1505                 phy_abort_cable_test(phydev);
1506                 netif_testing_off(dev);
1507         }
1508
1509         if (phydev->sfp_bus)
1510                 sfp_upstream_stop(phydev->sfp_bus);
1511
1512         phydev->state = PHY_HALTED;
1513         phy_process_state_change(phydev, old_state);
1514
1515         state_work = _phy_state_machine(phydev);
1516         mutex_unlock(&phydev->lock);
1517
1518         _phy_state_machine_post_work(phydev, state_work);
1519         phy_stop_machine(phydev);
1520
1521         /* Cannot call flush_scheduled_work() here as desired because
1522          * of rtnl_lock(), but PHY_HALTED shall guarantee irq handler
1523          * will not reenable interrupts.
1524          */
1525 }
1526 EXPORT_SYMBOL(phy_stop);
1527
1528 /**
1529  * phy_start - start or restart a PHY device
1530  * @phydev: target phy_device struct
1531  *
1532  * Description: Indicates the attached device's readiness to
1533  *   handle PHY-related work.  Used during startup to start the
1534  *   PHY, and after a call to phy_stop() to resume operation.
1535  *   Also used to indicate the MDIO bus has cleared an error
1536  *   condition.
1537  */
1538 void phy_start(struct phy_device *phydev)
1539 {
1540         mutex_lock(&phydev->lock);
1541
1542         if (phydev->state != PHY_READY && phydev->state != PHY_HALTED) {
1543                 WARN(1, "called from state %s\n",
1544                      phy_state_to_str(phydev->state));
1545                 goto out;
1546         }
1547
1548         if (phydev->sfp_bus)
1549                 sfp_upstream_start(phydev->sfp_bus);
1550
1551         /* if phy was suspended, bring the physical link up again */
1552         __phy_resume(phydev);
1553
1554         phydev->state = PHY_UP;
1555
1556         phy_start_machine(phydev);
1557 out:
1558         mutex_unlock(&phydev->lock);
1559 }
1560 EXPORT_SYMBOL(phy_start);
1561
1562 /**
1563  * phy_mac_interrupt - MAC says the link has changed
1564  * @phydev: phy_device struct with changed link
1565  *
1566  * The MAC layer is able to indicate there has been a change in the PHY link
1567  * status. Trigger the state machine and work a work queue.
1568  */
1569 void phy_mac_interrupt(struct phy_device *phydev)
1570 {
1571         /* Trigger a state machine change */
1572         phy_trigger_machine(phydev);
1573 }
1574 EXPORT_SYMBOL(phy_mac_interrupt);
1575
1576 /**
1577  * phy_init_eee - init and check the EEE feature
1578  * @phydev: target phy_device struct
1579  * @clk_stop_enable: PHY may stop the clock during LPI
1580  *
1581  * Description: it checks if the Energy-Efficient Ethernet (EEE)
1582  * is supported by looking at the MMD registers 3.20 and 7.60/61
1583  * and it programs the MMD register 3.0 setting the "Clock stop enable"
1584  * bit if required.
1585  */
1586 int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
1587 {
1588         int ret;
1589
1590         if (!phydev->drv)
1591                 return -EIO;
1592
1593         ret = genphy_c45_eee_is_active(phydev, NULL, NULL, NULL);
1594         if (ret < 0)
1595                 return ret;
1596         if (!ret)
1597                 return -EPROTONOSUPPORT;
1598
1599         if (clk_stop_enable)
1600                 /* Configure the PHY to stop receiving xMII
1601                  * clock while it is signaling LPI.
1602                  */
1603                 ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
1604                                        MDIO_PCS_CTRL1_CLKSTOP_EN);
1605
1606         return ret < 0 ? ret : 0;
1607 }
1608 EXPORT_SYMBOL(phy_init_eee);
1609
1610 /**
1611  * phy_get_eee_err - report the EEE wake error count
1612  * @phydev: target phy_device struct
1613  *
1614  * Description: it is to report the number of time where the PHY
1615  * failed to complete its normal wake sequence.
1616  */
1617 int phy_get_eee_err(struct phy_device *phydev)
1618 {
1619         int ret;
1620
1621         if (!phydev->drv)
1622                 return -EIO;
1623
1624         mutex_lock(&phydev->lock);
1625         ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR);
1626         mutex_unlock(&phydev->lock);
1627
1628         return ret;
1629 }
1630 EXPORT_SYMBOL(phy_get_eee_err);
1631
1632 /**
1633  * phy_ethtool_get_eee - get EEE supported and status
1634  * @phydev: target phy_device struct
1635  * @data: ethtool_eee data
1636  *
1637  * Description: it reportes the Supported/Advertisement/LP Advertisement
1638  * capabilities.
1639  */
1640 int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
1641 {
1642         int ret;
1643
1644         if (!phydev->drv)
1645                 return -EIO;
1646
1647         mutex_lock(&phydev->lock);
1648         ret = genphy_c45_ethtool_get_eee(phydev, data);
1649         mutex_unlock(&phydev->lock);
1650
1651         return ret;
1652 }
1653 EXPORT_SYMBOL(phy_ethtool_get_eee);
1654
1655 /**
1656  * phy_ethtool_set_eee - set EEE supported and status
1657  * @phydev: target phy_device struct
1658  * @data: ethtool_eee data
1659  *
1660  * Description: it is to program the Advertisement EEE register.
1661  */
1662 int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
1663 {
1664         int ret;
1665
1666         if (!phydev->drv)
1667                 return -EIO;
1668
1669         mutex_lock(&phydev->lock);
1670         ret = genphy_c45_ethtool_set_eee(phydev, data);
1671         mutex_unlock(&phydev->lock);
1672
1673         return ret;
1674 }
1675 EXPORT_SYMBOL(phy_ethtool_set_eee);
1676
1677 /**
1678  * phy_ethtool_set_wol - Configure Wake On LAN
1679  *
1680  * @phydev: target phy_device struct
1681  * @wol: Configuration requested
1682  */
1683 int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1684 {
1685         int ret;
1686
1687         if (phydev->drv && phydev->drv->set_wol) {
1688                 mutex_lock(&phydev->lock);
1689                 ret = phydev->drv->set_wol(phydev, wol);
1690                 mutex_unlock(&phydev->lock);
1691
1692                 return ret;
1693         }
1694
1695         return -EOPNOTSUPP;
1696 }
1697 EXPORT_SYMBOL(phy_ethtool_set_wol);
1698
1699 /**
1700  * phy_ethtool_get_wol - Get the current Wake On LAN configuration
1701  *
1702  * @phydev: target phy_device struct
1703  * @wol: Store the current configuration here
1704  */
1705 void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
1706 {
1707         if (phydev->drv && phydev->drv->get_wol) {
1708                 mutex_lock(&phydev->lock);
1709                 phydev->drv->get_wol(phydev, wol);
1710                 mutex_unlock(&phydev->lock);
1711         }
1712 }
1713 EXPORT_SYMBOL(phy_ethtool_get_wol);
1714
1715 int phy_ethtool_get_link_ksettings(struct net_device *ndev,
1716                                    struct ethtool_link_ksettings *cmd)
1717 {
1718         struct phy_device *phydev = ndev->phydev;
1719
1720         if (!phydev)
1721                 return -ENODEV;
1722
1723         phy_ethtool_ksettings_get(phydev, cmd);
1724
1725         return 0;
1726 }
1727 EXPORT_SYMBOL(phy_ethtool_get_link_ksettings);
1728
1729 int phy_ethtool_set_link_ksettings(struct net_device *ndev,
1730                                    const struct ethtool_link_ksettings *cmd)
1731 {
1732         struct phy_device *phydev = ndev->phydev;
1733
1734         if (!phydev)
1735                 return -ENODEV;
1736
1737         return phy_ethtool_ksettings_set(phydev, cmd);
1738 }
1739 EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);
1740
1741 /**
1742  * phy_ethtool_nway_reset - Restart auto negotiation
1743  * @ndev: Network device to restart autoneg for
1744  */
1745 int phy_ethtool_nway_reset(struct net_device *ndev)
1746 {
1747         struct phy_device *phydev = ndev->phydev;
1748         int ret;
1749
1750         if (!phydev)
1751                 return -ENODEV;
1752
1753         if (!phydev->drv)
1754                 return -EIO;
1755
1756         mutex_lock(&phydev->lock);
1757         ret = phy_restart_aneg(phydev);
1758         mutex_unlock(&phydev->lock);
1759
1760         return ret;
1761 }
1762 EXPORT_SYMBOL(phy_ethtool_nway_reset);